Stereocontrolled synthesis of chitosan dodecamer

Alternative processes to produce chitin, chitosan, and their oligomers

Sustainable recovery of chitin and its derivatives from shellfish waste will be achieved when the industrial production of these polymers is achieved with a high control of their molecular structure, low costs, and acceptable levels of pollution. Therefore, the conventional chemical method for obtaining these biopolymers needs to be replaced or optimized. The goal of the present review is to ascertain what alternative methods are viable for the industrial-scale production of chitin, chitosan, and their oligomers. Therefore, a detailed review of recent literature was undertaken, focusing on the advantages and disadvantages of each method. The analysis of the existing data allows suggesting that combining conventional, biological, and alternative methods is the most efficient strategy to achieve sustainable production, preventing negative impacts and allowing for the recovery of high added-value compounds from shellfish waste. In conclusion, a new process for obtaining chitinous materials is suggested, with the potential of reducing the consumption of reagents, energy, and water by at least 1/10, 1/4, and 1/3 part with respect to the conventional process, respectively.

Efficient and versatile formation of glycosidic bonds via catalytic strain-release glycosylation with glycosyl ortho-2,2-dimethoxycarbonylcyclopropylbenzoate donors

Catalytic glycosylation is a vital transformation in synthetic carbohydrate chemistry due to its ability to expediate the large-scale oligosaccharide synthesis for glycobiology studies with the consumption of minimal amounts of promoters. Herein we introduce a facile and efficient catalytic glycosylation employing glycosyl ortho-2,2-dimethoxycarbonylcyclopropylbenzoates (CCBz) promoted by a readily accessible and non-toxic Sc(III) catalyst system. The glycosylation reaction involves a novel activation mode of glycosyl esters driven by the ring-strain release of an intramolecularly incorporated donor-acceptor cyclopropane (DAC). The versatile glycosyl CCBz donor enables highly efficient construction of O-, S-, and N-glycosidic bonds under mild conditions, as exemplified by the convenient preparation of the synthetically challenging chitooligosaccharide derivatives. Of note, a gram-scale synthesis of tetrasaccharide corresponding to Lipid IV with modifiable handles is achieved using the catalytic strain-release glycosylation. These attractive features promise this donor to be the prototype for developing next generation of catalytic glycosylation.

Size-Controlled Synthesis of β(1→4)-GlcNAc Oligosaccharides Using an Endo-Glycosynthase

Chitin and peptidoglycan fragments are well recognized as pathogen associated molecular patterns (PAMPs). Long-chain oligosaccharides of β(1→4)-linked N-acetyl-D-glucosamine (GlcNAc) units indeed activate plants and mammals innate immune system. However, the mechanisms underlying PAMPs perception by lysine motif (LysM) domain receptors remain largely unknown because of insufficient availability of high-affinity molecular probes. Here, we report a two-enzyme cascade to synthesize long-chain β(1→4)-linked GlcNAc oligomers. Expression of the D52S mutant of hen egg-white lysozyme (HEWL) in Pichia pastoris at 52 mg L^-1 provided a new glycosynthase catalyzing efficient polymerization of α-chitintriosyl fluoride. Selective N-deacetylation at the non-reducing unit of the glycosyl fluoride donor by Sinorhizobium meliloti NodB chitin-N-deacetylase abolished its ability to be polymerized by the glycosynthase but not to be transferred onto an acceptor. Using NodB and D52S HEWL in a one-pot cascade reaction allowed the synthesis on a milligram scale of chitin hexa-, hepta- and octasaccharides with yields up to 65 % and a perfect control over their size.

Progress and challenges in the synthesis of sequence controlled polysaccharides

The sequence, length and substitution of a polysaccharide influence its physical and biological properties. Thus, sequence controlled polysaccharides are important targets to establish structure-properties correlations. Polymerization techniques and enzymatic methods have been optimized to obtain samples with well-defined substitution patterns and narrow molecular weight distribution. Chemical synthesis has granted access to polysaccharides with full control over the length. Here, we review the progress towards the synthesis of well-defined polysaccharides. For each class of polysaccharides, we discuss the available synthetic approaches and their current limitations.

Optimizing Chitin Depolymerization by Lysozyme to Long-Chain Oligosaccharides

Chitin oligosaccharides (COs) hold high promise as organic fertilizers in the ongoing agro-ecological transition. Short- and long-chain COs can contribute to the establishment of symbiotic associations between plants and microorganisms, facilitating the uptake of soil nutrients by host plants. Long-chain COs trigger plant innate immunity. A fine investigation of these different signaling pathways requires improving the access to high-purity COs. Here, we used the response surface methodology to optimize the production of COs by enzymatic hydrolysis of water-soluble chitin (WSC) with hen egg-white lysozyme. The influence of WSC concentration, its acetylation degree, and the reaction time course were modelled using a Box–Behnken design. Under optimized conditions, water-soluble COs up to the nonasaccharide were formed in 51% yield and purified to homogeneity. This straightforward approach opens new avenues to determine the complex roles of COs in plants.

Preparation of Defined Chitosan Oligosaccharides Using Chitin Deacetylases

During the past decade, detailed studies using well-defined 'second generation' chitosans have amply proved that both their material properties and their biological activities are dependent on their molecular structure, in particular on their degree of polymerisation (DP) and their fraction of acetylation (F_A). Recent evidence suggests that the pattern of acetylation (PA), i.e., the sequence of acetylated and non-acetylated residues along the linear polymer, is equally important, but chitosan polymers with defined, non-random PA are not yet available. One way in which the PA will influence the bioactivities of chitosan polymers is their enzymatic degradation by sequence-dependent chitosan hydrolases present in the target tissues. The PA of the polymer substrates in conjunction with the subsite preferences of the hydrolases determine the type of oligomeric products and the kinetics of their production and further degradation. Thus, the bioactivities of chitosan polymers will at least in part be carried by the chitosan oligomers produced from them, possibly through their interaction with pattern recognition receptors in target cells. In contrast to polymers, partially acetylated chitosan oligosaccharides (paCOS) can be fully characterised concerning their DP, F_A, and PA, and chitin deacetylases (CDAs) with different and known regio-selectivities are currently emerging as efficient tools to produce fully defined paCOS in quantities sufficient to probe their bioactivities. In this review, we describe the current state of the art on how CDAs can be used in forward and reverse mode to produce all of the possible paCOS dimers, trimers, and tetramers, most of the pentamers and many of the hexamers. In addition, we describe the biotechnological production of the required fully acetylated and fully deacetylated oligomer substrates, as well as the purification and characterisation of the paCOS products.

Temporary ether protecting groups at the anomeric center in complex carbohydrate synthesis

The synthesis of a carbohydrate building block usually starts with introduction of a temporary protecting group at the anomeric center and ends with its selective cleavage for further transformation. Thus, the choice of the anomeric temporary protecting group must be carefully considered because it should retain intact during the whole synthetic manipulation, and it should be chemoselectively removable without affecting other functional groups at a late stage in the synthesis. Etherate groups are the most widely used temporary protecting groups at the anomeric center, generally including allyl ethers, MP (p-methoxyphenyl) ethers, benzyl ethers, PMB (p-methoxybenzyl) eithers, and silyl ethers. This chapter provides a comprehensive review on their formation, cleavage, and applications in the synthesis of complex carbohydrates.

Application of a Janus aglycon with dual function in benzyl-free synthesis of spacer-armed oligosaccharide fragments of polysaccharides from rhizobacterium Azospirillum brasilense sp7

Both protective and pre-spacer features of 4-(2-chloroethoxy)phenyl (CEP) aglycon, which belong to the class of Janus aglycons, were engaged in a benzyl-free synthesis of oligosaccharide fragments of polysaccharides from rhizobacterium Azospirillum brasilense sp7. Introduction of α-1,4-linked L-fucose residue was performed using 3,4-di-O-benzoyl-2-O-triisopropylsilyl-α-L-fucopyranosyl N-phenyltrifluoroacetimidate in excellent stereoselectivity and high yields. The obtained deprotected di-, tri- and tetrasaccharides contain 4-(2-azidoethoxy)phenyl (AEP) spacer aglycon, which allows straightforward preparation of neoglycoconjugates that will be used for the study of the role of lipopolysaccharide of rhizobacterium A. brasilense sp7 in plant-microbe symbiosis. The intermediate protected oligosaccharide building blocks with cleavable CEP/AEP aglycons have a strong potential for further application in the synthesis of more complex oligosaccharides.

Chitin Deacetylases: Structures, Specificities, and Biotech Applications

Depolymerization and de-N-acetylation of chitin by chitinases and deacetylases generates a series of derivatives including chitosans and chitooligosaccharides (COS), which are involved in molecular recognition events such as modulation of cell signaling and morphogenesis, immune responses, and host-pathogen interactions. Chitosans and COS are also attractive scaffolds for the development of bionanomaterials for drug/gene delivery and tissue engineering applications. Most of the biological activities associated with COS seem to be largely dependent not only on the degree of polymerization but also on the acetylation pattern, which defines the charge density and distribution of GlcNAc and GlcNH₂ moieties in chitosans and COS. Chitin de-N-acetylases (CDAs) catalyze the hydrolysis of the acetamido group in GlcNAc residues of chitin, chitosan, and COS. The deacetylation patterns are diverse, some CDAs being specific for single positions, others showing multiple attack, processivity or random actions. This review summarizes the current knowledge on substrate specificity of bacterial and fungal CDAs, focusing on the structural and molecular aspects of their modes of action. Understanding the structural determinants of specificity will not only contribute to unravelling structure-function relationships, but also to use and engineer CDAs as biocatalysts for the production of tailor-made chitosans and COS for a growing number of applications.

Preparation of Chito-Oligomers by Hydrolysis of Chitosan in the Presence of Zeolite as Adsorbent

An increasing interest has recently been shown to use chitin/chitosan oligomers (chito-oligomers) in medicine and food fields because they are not only water-soluble, nontoxic, and biocompatible materials, but they also exhibit numerous biological properties, including antibacterial, antifungal, and antitumor activities, as well as immuno-enhancing effects on animals. Conventional depolymerization methods of chitosan to chito-oligomers are either chemical by acid-hydrolysis under harsh conditions or by enzymatic degradation. In this work, hydrolysis of chitosan to chito-oligomers has been achieved by applying adsorption-separation technique using diluted HCl in the presence of different types of zeolite as adsorbents. The chito-oligomers were retrieved from adsorbents and characterized by differential scanning calorimetry (DSC), liquid chromatography/mass spectroscopy (LC/MS), and ninhydrin test.

Recent Progress in Chitosanase Production of Monomer-Free Chitooligosaccharides: Bioprocess Strategies and Future Applications

Biological activities of chitosan oligosaccharides (COS) are well documented, and numerous reports of COS production using specific and non-specific enzymes are available. However, strategies for improving the overall yield by making it monomer free need to be developed. Continuous enzymatic production from chitosan derived from marine wastes is desirable and is cost-effective. Isolation of potential microbes showing chitosanase activity from various ecological niches, gene cloning, enzyme immobilization, and fractionation/purification of COS are some areas, where lot of work is in progress. This review covers recent measures to improve monomer-free COS production using chitosanase/non-specific enzymes and purification/fractionation of these molecules using ultrafiltration and column chromatographic techniques. Various bioprocess strategies, gene cloning for enhanced chitosanase enzyme production, and other measures for COS yield improvements have also been covered in this review. COS derivative preparation as well as COS-coated nanoparticles for efficient drug delivery are being focused in recent studies.

Enzymatic production of defined chitosan oligomers with a specific pattern of acetylation using a combination of chitin oligosaccharide deacetylases

Chitin and chitosan oligomers have diverse biological activities with potentially valuable applications in fields like medicine, cosmetics, or agriculture. These properties may depend not only on the degrees of polymerization and acetylation, but also on a specific pattern of acetylation (PA) that cannot be controlled when the oligomers are produced by chemical hydrolysis. To determine the influence of the PA on the biological activities, defined chitosan oligomers in sufficient amounts are needed. Chitosan oligomers with specific PA can be produced by enzymatic deacetylation of chitin oligomers, but the diversity is limited by the low number of chitin deacetylases available. We have produced specific chitosan oligomers which are deacetylated at the first two units starting from the non-reducing end by the combined use of two different chitin deacetylases, namely NodB from Rhizobium sp. GRH2 that deacetylates the first unit and COD from Vibrio cholerae that deacetylates the second unit starting from the non-reducing end. Both chitin deacetylases accept the product of each other resulting in production of chitosan oligomers with a novel and defined PA. When extended to further chitin deacetylases, this approach has the potential to yield a large range of novel chitosan oligomers with a fully defined architecture.

Synthesis of Chitosan Oligomers/Propolis/Silver Nanoparticles Composite Systems and Study of Their Activity againstDiplodia seriata

The synthesis and characterization of composites of oligomeric chitosan with propolis extract which allow the incorporation of a third component (silver nanoparticles) are reported, together with their application in aqueous or hydroalcoholic solutions with a view to the formation of adhesive substances or nanofilms for the protection of vineyards against harmful xylophagous fungi. The antimicrobial properties of the association of the two biological products or those resulting from the incorporation of silver nanoparticles (NPs) are studied and discussed. The efficacy of the chitosan oligomers/propolis/silver NPs ternary system is assessedin vitroforDiplodiafungi. A preliminary study on the convenience of replacing propolis with gentisic acid is also presented.

From chitin to bioactive chitooligosaccharides and conjugates: access to lipochitooligosaccharides and the TMG-chitotriomycin

The direct and chemoselective N-transacylation of peracetylated chitooligosaccharides (COSs), readily obtained from chitin, to give per-N-trifluoroacetyl derivatives offers an attractive route to size-defined COSs and derived glycoconjugates. It involves the use of various acceptor building blocks and trifluoromethyl oxazoline dimer donors prepared with efficiency and highly reactive in 1,2-trans glycosylation reactions. This method was applied to the preparation of the important symbiotic glycolipids which are highly active on plants and to the TMG-chitotriomycin, a potent and specific inhibitor of insect, fungal, and bacterial N-acetylglucosaminidases.

Enzymatic sequencing of partially acetylated chitosan oligomers

Chitosan oligosaccharides have diverse biological activities with potentially valuable applications, for example, in the fields of medicine and agriculture. These functionalities are thought to depend on their degree of polymerization and acetylation, and possibly on specific patterns of acetylation. Chitosan oligomers with fully defined architecture are difficult to produce, and their complete analysis is demanding. Analysis is typically done using MS or NMR, requiring access to expensive infrastructure, and yielding unequivocal results only in the case of rather small oligomers. We here describe a simple and cost-efficient method for the sequencing of μg amounts of chitosan oligosaccharides which is based on the sequential action of two recombinant glycosidases, namely an exo-β-N-acetylhexosaminidase (GlcNAcase) from Bacillus subtilis 168 and an exo-β-d-glucosaminidase (GlcNase) from Thermococcus kodakarensis KOD1. Starting from the non-reducing end, GlcNAcase and GlcNase specifically remove N-acetyl glucosamine (A) and glucosamine (D) units, respectively. By the sequential addition and removal of these enzymes in an alternating way followed by analysis of the products using high-performance thin-layer chromatography, the sequence of chitosan oligosaccharides can be revealed. Importantly, both enzymes work under identical conditions so that no buffer exchange is required between steps, and the enzyme can be removed conveniently using simple ultra-filtration devices. As proof-of-principle, the method was used to sequence the product of enzymatic deacetylation of chitin pentamer using a recombinant chitin deacetylase from Vibrio cholerae which specifically removes the acetyl group from the second unit next to the non-reducing end of the substrate, yielding mono-deacetylated pentamer with the sequence ADAAA.

Significant substituent effect on the anomerization of pyranosides: mechanism of anomerization and synthesis of a 1,2-cis glucosamine oligomer from the 1,2-trans anomer

Aminoglycosides containing a 2,3-trans carbamate group easily undergo anomerization from the 1,2-trans glycoside to the 1,2-cis isomer under mild acidic conditions. The N-substituent of the carbamate has a significant effect on the anomerization reaction; in particular, an N-acetyl group facilitated rapid and complete α-anomerization. The differences in reactivity due to the various N-substituents were supported by the results of DFT calculations; the orientation of the acetyl carbonyl group close to the anomeric position was found to contribute significantly to the directing of the anomerization reaction. By exploiting this reaction, oligoaminoglycosides with multiple 1,2-cis glycosidic bonds were generated from 1,2-trans glycosides in a one-step process.

Biotechnological approaches for field applications of chitooligosaccharides (COS) to induce innate immunity in plants

Plants have evolved mechanisms to recognize a wide range of pathogen-derived molecules and to express induced resistance against pathogen attack. Exploitation of induced resistance, by application of novel bioactive elicitors, is an attractive alternative for crop protection. Chitooligosaccharide (COS) elicitors, released during plant fungal interactions, induce plant defenses upon recognition. Detailed analyses of structure/function relationships of bioactive chitosans as well as recent progress towards understanding the mechanism of COS sensing in plants through the identification and characterization of their cognate receptors have generated fresh impetus for approaches that would induce innate immunity in plants. These progresses combined with the application of chitin/chitosan/COS in disease management are reviewed here. In considering the field application of COS, however, efficient and large-scale production of desired COS is a challenging task. The available methods, including chemical or enzymatic hydrolysis and chemical or biotechnological synthesis to produce COS, are also reviewed.

Access to tetra-N-acetyl-chitopentaose by chemical N-acetylation of glucosamine pentamer

Nowadays, the easy access of tetra-N-acetyl-chitopentaose and its counterparts is highly interesting since such chemical compounds are precursors of biological signal molecules with a strong agro-economic impact. The chemical synthesis of tetra-N-acetyl-chitopentaose by controlled N-acetylation of the glucosamine pentamer hydrochloride under mild conditions is described herein. A systematic study on the influence of the different parameters involved in this reaction, such as the solvent, the acetylating agent, and the base used for the deprotonation of ammonium groups of the starting material was carried out. The characterization of final reaction products by HPLC and MALDI-TOF mass spectrometry showed that each of these parameters affects differently the acetylation reaction. Whereas the solvent plays an important role in the N- or O-acetylation selectivity, the acetylating agent and the base were found to influence both the degree of N-acetylation and the distribution of the partially N-acetylated derivatives in the product mixtures. Based on these results, optimized reaction conditions have been established allowing tetra-N-acetyl-chitopentaose to be synthesized in a one-pot deprotonation/N-acetylation of the glucosamine pentamer hydrochloride in a moderate yield (ca 30%).

Synthetic study and structural analysis of the antifreeze agent xylomannan from Upis ceramboides

The novel antifreeze factor, xylomannan, first isolated from the freeze-tolerant Alaskan beetle Upis ceramboides , demonstrates a high degree of thermal hysteresis, comparable to that of the most active insect antifreeze proteins. Although the presence of a lipid component in this factor has not yet been verified, it has been proposed that the glycan backbone consists of a β-D-mannopyranosyl-(1→4)-β-D-xylopyranose-disaccharide-repeating structure according to MS and NMR analyses. In this contribution, we report the stereoselective synthesis of the tetrasaccharide β-D-mannopyranosyl-(1→4)-β-D-xylopyranosyl-(1→4)-β-D-mannopyranosyl-(1→4)-D-xylopyranoside, a structural component of xylomannan. Our synthesis features the use of 2-naphthylmethyl (NAP)-ether-mediated intramolecular aglycon delivery (IAD) as the key reaction in obtaining β-mannopyranoside stereoselectively. Various donors for NAP-IAD were tested to determine the most suitable for the purposes of this synthesis. Fragment coupling between a disaccharyl fluoride and a disaccharide acceptor obtained from a common β-D-mannopyranosyl-(1→4)-β-D-xylopyranoside derivative was successfully carried out to afford the desired tetrasaccharide in the presence of Cp(2)HfCl(2)-AgClO(4). Structural analysis of the resulting synthetic tetrasaccharide using NMR techniques and molecular modeling was performed in order to demonstrate the presence of the proposed xylomannan linkages in this molecule.

Application of spectroscopic methods for structural analysis of chitin and chitosan

Chitin, the second most important natural polymer in the world, and its N-deacetylated derivative chitosan, have been identified as versatile biopolymers for a broad range of applications in medicine, agriculture and the food industry. Two of the main reasons for this are firstly the unique chemical, physicochemical and biological properties of chitin and chitosan, and secondly the unlimited supply of raw materials for their production. These polymers exhibit widely differing physicochemical properties depending on the chitin source and the conditions of chitosan production. The presence of reactive functional groups as well as the polysaccharide nature of these biopolymers enables them to undergo diverse chemical modifications. A complete chemical and physicochemical characterization of chitin, chitosan and their derivatives is not possible without using spectroscopic techniques. This review focuses on the application of spectroscopic methods for the structural analysis of these compounds.

Production of chitooligosaccharides and their potential applications in medicine

Chitooligosaccharides (CHOS) are homo- or heterooligomers of N-acetylglucosamine and D-glucosamine. CHOS can be produced using chitin or chitosan as a starting material, using enzymatic conversions, chemical methods or combinations thereof. Production of well-defined CHOS-mixtures, or even pure CHOS, is of great interest since these oligosaccharides are thought to have several interesting bioactivities. Understanding the mechanisms underlying these bioactivities is of major importance. However, so far in-depth knowledge on the mode-of-action of CHOS is scarce, one major reason being that most published studies are done with badly characterized heterogeneous mixtures of CHOS. Production of CHOS that are well-defined in terms of length, degree of N-acetylation, and sequence is not straightforward. Here we provide an overview of techniques that may be used to produce and characterize reasonably well-defined CHOS fractions. We also present possible medical applications of CHOS, including tumor growth inhibition and inhibition of T(H)2-induced inflammation in asthma, as well as use as a bone-strengthener in osteoporosis, a vector for gene delivery, an antibacterial agent, an antifungal agent, an anti-malaria agent, or a hemostatic agent in wound-dressings. By using well-defined CHOS-mixtures it will become possible to obtain a better understanding of the mechanisms underlying these bioactivities.

Chemical preparation and structural characterization of a homogeneous series of chitin/chitosan oligomers

The preparation of a homogeneous series of chitin/chitosan oligomers (chito-oligomers) with the same distribution of degrees of polymerization (DP) ranging from 2 to 12, but with various average degrees of N-acetylation (DA) from 0 to 90% is described. This DA-series was obtained according to a two-step chemical process involving (i) the production of a well-defined mixture of glucosamine (GlcN) oligomers obtained by acid hydrolysis of a fully N-deacetylated chitosan and after selective precipitations of the hydrolysis products, and (ii) the partial N-acetylation of the GlcN units of these oligomers from a hydro-alcoholic solution of acetic anhydride in a controlled manner. The characterization of this series of samples with different DAs by proton nuclear magnetic resonance (1H NMR) spectroscopy and matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) allowed us to determine their average DA and identify the main oligomer structures constituting each mixture. Furthermore, MALDI-TOF MS was particularly helpful to study the distribution evolution of the diverse oligomers as a function of DA for the main DPs from 3 to 7. The modeling of these distributions by means of a binomial law displayed that the chemical N-acetylation of low DP GlcN oligomers, produced in a homogeneous medium, occurs randomly along the oligosaccharide chains in accordance with a statistical (Bernoullian) arrangement. In this case, the relative proportion of each chito-oligomer present in the mixture can be estimated precisely as a function of DA considering oligomers of same DP.

Iterative one-pot syntheses of chitotetroses

Rapid syntheses of chitotetrose derivatives were achieved in good yields using the newly developed reactivity independent iterative one-pot strategy. The protective groups on donors and acceptors were independently evaluated allowing matching of the two partners in glycosylation. No anomeric reactivity adjustments or intermediate purification were necessary thus significantly improving the overall synthetic efficiency. Only near stoichiometric amounts of building blocks were required for the assembly of target molecules further highlighting the potential of the iterative one-pot method in complex oligosaccharide synthesis.

A novel method for chemo-enzymatic synthesis of elicitor-active chitosan oligomers and partially N-deacetylated chitin oligomers using N-acylated chitotrioses as substrates in a lysozyme-catalyzed transglycosylation reaction system

N,N',N"-Tri(monochloro)acetylchitotriose prepared by N-monochloroacetylation of chitotriose trihydrochloride was successfully polymerized into higher-molecular-weight oligomers by a lysozyme-catalyzed transglycosylation reaction, and a following base-catalyzed N-demonochloroacetylation gave a chitosan oligomer mixture mainly composed of oligomers with dp > 6. Partially N-deacetylated chitin oligomers (DAC oligomers) with dp 4-12 were synthesized by the enzyme reaction using N,N',N"-tri(monochloro)acetylchitotriose and N,N',N"-triacetylchitotriose (chitin trimer) as initial substrates followed by N-demonochloroacetylation. The structures of synthetic oligomers were analyzed by 1H NMR spectroscopy, enzymatic hydrolysis and nitrous acid deamination-NaBH4 reduction treatment. The dp of synthetic oligomers was measured by MALDI TOF MS (matrix-assisted laser desorption ionization time-of-flight mass spectrometry) using per-N-acetylated derivatives. The synthetic chitosan and DAC oligomers were strong elicitors for phytoalexin induction in Pisum sativum and Phaseolus vulgaris. This chemo-enzymatic method utilizing N-acylated chitotrioses as substrates is a novel approach to the synthesis of high-molecular-weight chitosan oligomers and DAC oligomers of biological importance.

A convenient access to beta-(1-->4)-linked 2-amino-2-deoxy-D-glucopyranosyl fluoride oligosaccharides and beta-(1-->4)-linked 2-amino-2-deoxy-D-glucopyranosyl oligosaccharides by fluorolysis and fluorohydrolysis of chitosan

beta-(1-->4)-Linked 2-amino-2-deoxy-D-glucopyranosyl oligosaccharides, in the form of their alpha-glucopyranosyl fluorides at the reducing end, were obtained by fluorolysis of chitosan in anhydrous hydrogen fluoride at room temperature. The average dp depended on the reaction time and was conveniently monitored by 13C NMR spectroscopy, using the signal ratios for beta-(1-->4) bonded C-1 at approximately 98.5 ppm and the C-1 doublet for the terminal glycosyl fluoride moiety at approximately 104 ppm. Preparative fractionation of dp 2-11 glycosyl fluoride oligosaccharides, obtained after 18 h of fluorolysis, was achieved by gel-permeation chromatography on Bio-Gel P-4 with aqueous acetic acid-ammonium acetate as eluent. Hydrolysis of the anomeric fluoride, with either aqueous perchloric acid, or by a sequence involving formation of the C-2 N-trifluoroacetate and subsequent simultaneous hydrolysis of the glycosyl fluoride and the amide substituent with aqueous methanol, yielded the free beta-(1-->4)-linked 2-amino-2-deoxy-D-glucopyranosyl oligosaccharides which were separated, for dp 2-11, by the same gel-exclusion technique. Both oligosaccharide series, either free or in the form of their alpha-glycopyranosyl fluorides, were fully characterized.