Antibodies against synthetic amphipathic helical sequences of surfactant protein SP-B detect a conformational change in the native protein

Critical structural and functional roles for the N-terminal insertion sequence in surfactant protein B analogs

Background

Surfactant protein B (SP-B; 79 residues) belongs to the saposin protein superfamily, and plays functional roles in lung surfactant. The disulfide cross-linked, N- and C-terminal domains of SP-B have been theoretically predicted to fold as charged, amphipathic helices, suggesting their participation in surfactant activities. Earlier structural studies with Mini-B, a disulfide-linked construct based on the N- and C-terminal regions of SP-B (i.e., ∼residues 8–25 and 63–78), confirmed that these neighboring domains are helical; moreover, Mini-B retains critical in vitro and in vivo surfactant functions of the native protein. Here, we perform similar analyses on a Super Mini-B construct that has native SP-B residues (1–7) attached to the N-terminus of Mini-B, to test whether the N-terminal sequence is also involved in surfactant activity.

Methodology/Results

FTIR spectra of Mini-B and Super Mini-B in either lipids or lipid-mimics indicated that these peptides share similar conformations, with primary α-helix and secondary β-sheet and loop-turns. Gel electrophoresis demonstrated that Super Mini-B was dimeric in SDS detergent-polyacrylamide, while Mini-B was monomeric. Surface plasmon resonance (SPR), predictive aggregation algorithms, and molecular dynamics (MD) and docking simulations further suggested a preliminary model for dimeric Super Mini-B, in which monomers self-associate to form a dimer peptide with a “saposin-like” fold. Similar to native SP-B, both Mini-B and Super Mini-B exhibit in vitro activity with spread films showing near-zero minimum surface tension during cycling using captive bubble surfactometry. In vivo, Super Mini-B demonstrates oxygenation and dynamic compliance that are greater than Mini-B and compare favorably to full-length SP-B.

Conclusion

Super Mini-B shows enhanced surfactant activity, probably due to the self-assembly of monomer peptide into dimer Super Mini-B that mimics the functions and putative structure of native SP-B.

The role of charged amphipathic helices in the structure and function of surfactant protein B

Surfactant protein B (SP-B) is essential for normal lung surfactant function. Theoretical models predict that the disulfide cross-linked, N- and C-terminal domains of SP-B fold as charged amphipathic helices, and suggest that these adjacent helices participate in critical surfactant activities. This hypothesis is tested using a disulfide-linked construct (Mini-B) based on the primary sequences of the N- and C-terminal domains. Consistent with theoretical predictions of the full-length protein, both isotope-enhanced Fourier transform infrared (FTIR) spectroscopy and molecular modeling confirm the presence of charged amphipathic alpha-helices in Mini-B. Similar to that observed with native SP-B, Mini-B in model surfactant lipid mixtures exhibits marked in vitro activity, with spread films showing near-zero minimum surface tensions during cycling using captive bubble surfactometry. In vivo, Mini-B shows oxygenation and dynamic compliance that compare favorably with that of full-length SP-B. Mini-B variants (i.e. reduced disulfides or cationic residues replaced by uncharged residues) or Mini-B fragments (i.e. unlinked N- and C-terminal domains) produced greatly attenuated in vivo and in vitro surfactant properties. Hence, the combination of structure and charge for the amphipathic alpha-helical N- and C-terminal domains are key to SP-B function.

Structure and properties of phospholipid-peptide monolayers containing monomeric SP-B(1-25) II. Peptide conformation by infrared spectroscopy

The conformation and orientation of synthetic monomeric human sequence SP-B(1-25) (mSP-B(1-25)) was studied in films with phospholipids at the air-water (A/W) interface by polarization modulation infrared reflectance absorption spectroscopy (PM-IRRAS). Modified two-dimensional infrared (2D IR) correlation analysis was applied to PM-IRRAS spectra to define changes in the secondary structure and rates of reorientation of mSP-B(1-25) in the monolayer during compression. PM-IRRAS spectra and 2D IR correlation analysis showed that, in pure films, mSP-B(1-25) had a major alpha-helical conformation plus regions of beta-sheet structure. These alpha-helical regions reoriented later during film compression than beta structural regions, and became oriented normal to the A/W interface as surface pressure increased. In mixed films with 4:1 mol:mol acyl chain perdeuterated 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DPPC-d(62):DOPG), the IR spectra of mSP-B(1-25) showed that a significant, concentration-dependent conformational change occurred when mSP-B(1-25) was incorporated into a DPPC-d(62):DOPG monolayer. At an mSP-B(1-25) concentration of 10 wt.%, the peptide assumed a predominantly beta-sheet conformation with no contribution from alpha-helical structures. At lower, more physiological peptide concentrations, 2D IR correlation analysis showed that the propensity of mSP-B(1-25) to form alpha-helical structures was increased. In phospholipid films containing 5 wt.% mSP-B(1-25), a substantial alpha-helical peptide structural component was observed, but regions of alpha and beta structure reoriented together rather than independently during compression. In films containing 1 wt.% mSP-B(1-25), peptide conformation was predominantly alpha-helical and the helical regions reoriented later during compression than the remaining beta structural components. The increased alpha-helical structure of mSP-B(1-25) demonstrated here by PM-IRRAS and 2D IR correlation analysis in monolayers of 4:1 DPPC:DOPG containing 1 wt.% (and, to a lesser extent, 5 wt.%) peptide may be relevant for the formation of the intermediate order 'dendritic' surface phase observed in similar surface films by epi-fluorescence.

Structure and properties of phospholipid–peptide monolayers containing monomeric SP-B1–25

Epifluorescence microscopy was used to study the structure and phase behavior of phospholipid films containing a human-sequence monomeric SP-B(1-25) synthetic peptide (mSP-B(1-25)). Measurements were done directly at the air-water (A/W) interface on films in a Langmuir-Whilhelmy balance coupled to a fluorescence microscope and real-time detection system to yield an approximate optical resolution of 1 mum. Fluorescence was achieved by laser excitation of 2-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-dodecanoyl)-1-hexadecanoyl-sn-glycero-3-PC (BODIPY-PC, concentration </=1 mol%). The presence of mSP-B(1-25) in films of 4:1 (mol/mol) 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC)/1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DOPG) had a substantial effect on lipid morphology and phase behavior that depended on both surface pressure and peptide concentration (10, 5, and 1 wt.%). The mSP-B(1-25) peptide tended to fluidize phospholipid monolayers based on expanded molecular areas and reduced collapse pressures. In addition, epifluorescence measurements revealed the formation of solid-phase domains apparent as three-armed counterclockwise spirals separated from regions of fluid liquid-expanded phase domains in compressed phospholipid-peptide films. The appearance of these separated solid-phase domains resembled pure L-DPPC rather than the ensemble-type solid domains found in films of DPPC/DOPG alone and were most apparent when 10 wt.% mSP-B(1-25) was present. In contrast, films containing lower, more physiological mSP-B(1-25) contents of 5 and 1 wt.% exhibited a prominent intermediate 'dendritic' phase that increased in extent as surface pressure was raised. This phase was characterized by branching structures that formed a lattice-like mesh network with fluorescence intensities between a dye-depleted solid domain and a dye-enriched liquid phase. These results indicate that mSP-B(1-25) at near-physiological levels produces morphological changes in phospholipid monolayers analogous to those observed for native SP-B(1-79).

Topographical organization of the N-terminal segment of lung pulmonary surfactant protein B (SP-B(1-25)) in phospholipid bilayers

The location and depth of each residue of lung pulmonary surfactant protein B (SP-B(1-25)) in a phospholipid bilayer (PB) was determined by fluorescence quenching using synthesized single-residue-substituted peptides that were reconstituted into 1,2-dipalmitoyl phosphatidylcholine (DPPC)-enriched liposomes. The single-residue substitutions in peptides were either aspartate or tryptophan. The aspartate was subsequently labeled with the N-cyclohexyl-N'-(4-(dimethylamino)naphthyl)carbodiimide (NCD-4) fluorophore, whereas tryptophan is autofluorescent. Spin-labeled compounds, 5-doxylstearic acid (5-DSA), 7-doxylstearic acid (7-DSA), 12-doxylstearic acid (12-DSA), 4-(N,N-dimethyl-N-hexadecyl)ammonium-2,2,6,6-tetramethylpiperidine-1-oxyl iodide (CAT-16), and 4-trimethylammonium-2,2,6,6-tetramethylpiperidine-1-oxy iodide (CAT-1), were used in the quenching experiments. The effective quenching order is determined by the accessibility of the quencher to a fluorescent group on the peptide. The order of quenching efficiency provides information about the relative locations of individual residues in the PB. Our data indicate that residues Phe1-Pro6 are located at the surface of PB, residues Tyr7-Trp9 are embedded in PB, and residues Leu10-Ile22 are involved in an amphipathic alpha-helix with its axis parallel to the surface of PB; residues Pro23-Gly25 reside at the surface. The effects of intermolecular disulfide bond formation in the SP-B(1-25) dimer were also investigated. The experiments suggest that the SP-B helix A has to rotate at an angle to form a disulfide bond with the neighboring cysteine, which makes the hydrophobic sides of the amphipathic helices face each other, thus forming a hydrophobic domain. The detailed topographical mapping of SP-B(1-25) and its dimer in PB provides new insights into the conformational organization of the lung pulmonary surfactant proteins in the environment that mimics the native state. The environment-specific conformational flexibility of the hydrophobic domain created by SP-B folding may explain the key functional properties of SP-B including their impact on phospholipid transport between the lipid phases and in modulating the cell inflammatory response during respiratory distress syndrome.

Surfactant protein B and C analogues

Mammalian lung surfactant is a mixture of phospholipids and four surfactant-associated proteins (SP-A, SP-B, SP-C, and SP-D). Its major function is to reduce surface tension at the air-water interface in the terminal airways by the formation of a surface-active film highly enriched in dipalmitoyl phosphatidylcholine (DPPC), thereby preventing alveolar collapse during expiration. SP-A and SP-D are large hydrophilic proteins, which play an important role in host defense, whereas the small hydrophobic peptides SP-B and SP-C interact with DPPC to generate and maintain a surface-active film. Surfactant replacement therapy with bovine and porcine lung surfactant extracts, which contain only polar lipids and SP-B and SP-C, has revolutionized the clinical management of premature infants with respiratory distress syndrome. Newer surfactant preparations will probably be based on SP-B and SP-C, produced by recombinant technology or peptide synthesis, and reconstituted with selected synthetic lipids. The development of peptide analogues of SP-B and SP-C offers the possibility to study their molecular mechanism of action and will allow the design of surfactant formulations for specific pulmonary diseases and better quality control. This review describes the hydrophobic peptide analogues developed thus far and their potential for use in a new generation of synthetic surfactant preparations.

Conformational mapping of the N-terminal segment of surfactant protein B in lipid using 13C-enhanced Fourier transform infrared spectroscopy

Synthetic peptides based on the N-terminal domain of human surfactant protein B (SP-B1-25; 25 amino acid residues; NH2-FPIPLPYCWLCRALIKRIQAMIPKG) retain important lung activities of the full-length, 79-residue protein. Here, we used physical techniques to examine the secondary conformation of SP-B1-25 in aqueous, lipid and structure-promoting environments. Circular dichroism and conventional, 12C-Fourier transform infrared (FTIR) spectroscopy each indicated a predominate alpha-helical conformation for SP-B1-25 in phosphate-buffered saline, liposomes of 1-palmitoyl-2-oleoyl phosphatidylglycerol and the structure-promoting solvent hexafluoroisopropanol; FTIR spectra also showed significant beta- and random conformations for peptide in these three environments. In further experiments designed to map secondary structure to specific residues, isotope-enhanced FTIR spectroscopy was performed with 1-palmitoyl-2-oleoyl phosphatidylglycerol liposomes and a suite of SP-B1-25 peptides labeled with 13C-carbonyl groups at either single or multiple sites. Combining these 13C-enhanced FTIR results with energy minimizations and molecular simulations indicated the following model for SP-B1-25 in 1-palmitoyl-2-oleoyl phosphatidylglycerol: beta-sheet (residues 1-6), alpha-helix (residues 8-22) and random (residues 23-25) conformations. Analogous structural motifs are observed in the corresponding homologous N-terminal regions of several proteins that also share the 'saposin-like' (i.e. 5-helix bundle) folding pattern of full-length, human SP-B. In future studies, 13C-enhanced FTIR spectroscopy and energy minimizations may be of general use in defining backbone conformations at amino acid resolution, particularly for peptides or proteins in membrane environments.

Synthetic mimics of surfactant proteins B and C: in vitro surface activity and effects on lung compliance in two animal models of surfactant deficiency

Synthetic surfactant peptides SP-B1-78 and SP-C1-31 in a standard phospholipid mixture have been employed to examine the correlation between in vitro surface activity and in vivo function of synthetic surfactant preparations in the isolated rat lung and premature rabbit models of respiratory distress syndrome. Monolayer techniques showed that SP-B peptides have a high propensity for association with a phospholipid structure. By dynamic respreading, synthetic SP-B and SP-C showed rapid spreading and attained low surface tensions. Used as replacement surfactants in two animal models, these synthetic surfactant preparations partially restored lung compliance in lavaged rats and premature rabbits better than a pure phospholipid preparation and to a degree comparable to clinical surfactant, measured by pressure/volume curves. Our data confirm that in vitro functional determinations of synthetic surfactant peptides are instrumental in the preparation of replacement surfactants, and that dispersions thus selected represent viable therapeutic alternatives to current treatments for respiratory distress syndrome.

Combinations of fluorescently labeled pulmonary surfactant proteins SP-B and SP-C in phospholipid films

Hydrophobic pulmonary surfactant (PS) proteins B (SP-B) and C (SP-C) modulate the surface properties of PS lipids. Epifluorescence microscopy was performed on solvent-spread monolayers of fluorescently labeled porcine SP-B (R-SP-B, labeled with Texas Red) and SP-C (F-SP-C, labeled with fluorescein) in dipalmitoylphosphatidylcholine (DPPC) (at protein concentrations of 10 and 20 wt%, and 10 wt% of both) under conditions of cyclic compression and expansion. Matrix-assisted laser desorption/ionization (MALDI) spectroscopy of R-SP-B and F-SP-C indicated that the proteins were intact and labeled with the appropriate fluorescent probe. The monolayers were compressed and expanded for four cycles at an initial rate of 0.64 A2 x mol(-1) x s(-1) (333 mm2 x s x [-1]) up to a surface pressure pi approximately 65 mN/m, and pi-area per residue (pi-A) isotherms at 22 +/- 1 degrees C were obtained. The monolayers were microscopically observed for the fluorescence emission of the individual proteins present in the film lipid matrix, and their visual features were video recorded for image analysis. The pi-A isotherms of the DPPC/protein monolayers showed characteristic "squeeze out" effects at pi approximately 43 mN/m for R-SP-B and 55 mN/m for F-SP-C, as had previously been observed for monolayers of the native proteins in DPPC. Both proteins associated with the expanded (fluid) phase of DPPC monolayers remained in or associated with the monolayers at high pi (approximately 65 mN/m) and redispersed in the monolayer upon its reexpansion. At comparable pi and area/molecule of the lipid, the proteins reduced the amounts of condensed (gel-like) phase of DPPC monolayers, with F-SP-C having a greater effect on a weight basis than did R-SP-B. In any one of the lipid/protein monolayers the amounts of the DPPC in condensed phase were the same at equivalent pi during compression and expansion and from cycle to cycle. This indicated that only minor loss of components from these systems occurred between compression-expansion cycles. This study indicates that hydrophobic PS proteins associate with the fluid phase of DPPC in films, some proteins remain at high surface pressures in the films, and such lipid-protein films can still attain high pi during compression.

Binding of site-directed monoclonal antibodies to an epitope located in the A/B region (amino acids 140-154) of human estrogen receptor-induced conformational changes in an epitope in the DNA-binding domain

The interactions of estrogen receptor (ER) with monoclonal antibody (Mab) F9, developed against a synthetic 30-mer hybrid oligopeptide, were determined in the presence or absence of Mab NMT-1, raised against 15-mer peptide from the N-terminal A/B region (amino acids 140- 154) or Mab 213, raised to a peptide AT3 in the DNA-binding domain (amino acids 247-263). Mab F9 bound ER and formed a complex sedimenting at the approximately 11S region of the gradients. Mabs 213 and NMT-1 bound ER and formed complexes sedimenting at approximately 7S and 9S, respectively. Preincubation of ER with Mab 213, followed by reincubation with Mab F9, resulted in a complex sedimenting at the approximately 11S region of the gradients. Similarly, preincubation of ER with Mab NMT-1 followed by reincubation with Mab F9 also produced an approximately 11S complex on the gradients. These observations suggest that binding of Mab F9 to ER induced conformational changes causing the release of Mab 213 and Mab NMT-1 from ER. Furthermore, binding of Mab NMT-1 to the A/B region of ER also produced conformational changes causing the release of Mab 213 from its epitope in the DNA-binding region. These results indicate that binding of Mab F9 and Mab NMT-1, with epitopes located within amino acids 140-154 of the A/B region of ER, induced conformational changes in the DNA-binding domain, as determined by the inability of Mab 213 to remain bound to its epitope. These data further suggest that the DNA-binding region is sensitive to conformational changes induced in the native protein.

Conformation and molecular topography of the N-terminal segment of surfactant protein B in structure-promoting environments

Although the effects of surfactant protein B (SP-B) on lipid surface activity in vitro and in vivo are well known, the relationship between molecular structure and function is still not fully understood. To further characterize protein structure-activity correlations, we have used physical techniques to study conformation, orientation, and molecular topography of N-terminal SP-B peptides in lipids and structure-promoting environments. Fourier transform infrared (FTIR) and CD measurements of SP-B1-25 (residues 1-25) in methanol, SDS micelles, egg yolk lecithin (EYL) liposomes, and surfactant lipids indicate the peptide has a dominant helical content, with minor turn and disordered components. Polarized FTIR studies of SP-B1-25 indicate the long molecular axis lies at an oblique angle to the surface of lipid films. Truncated peptides were similarly examined to assign more accurately the discrete conformations within the SP-B1-25 sequence. Residues Cys-8-Gly-25 are largely alpha-helix in methanol, whereas the N-terminal segment Phe-1-Cys-8 had turn and helical propensities. Addition of SP-B1-25 spin-labeled at the N-terminal Phe (i.e., SP-B1-25) to SDS, EYL, or surfactant lipids yielded electron spin resonance spectra that reflect peptide bound to lipids, but retaining considerable mobility. The absence of characteristic radical broadening indicates that SP-B1-25 is minimally aggregated when it interacts with these lipids. Further, the high polarity of SP-B1-25 argues that the reporter on Phe-1 resides in the headgroup of the lipid dispersions. The blue-shift in the endogenous fluorescence of Trp-9 near the N-terminus of SP-B1-25 suggests that this residue also lies near the lipid headgroup. A summary model based on the above physical experiments is presented for SP-B1-25 interacting with lipids.

Inactivation of surfactant in rat lungs

Although surfactant replacement therapy has dramatically improved the outcome of premature infants with respiratory distress syndrome, approximately 30% of treated infants show a transient or no response. Nonresponse to surfactant replacement therapy may be due to extreme lung immaturity and possibly surfactant inactivation. Surfactant inactivation involves aspecific biophysical events, such as interference with the formation or activity of an alveolar monolayer, and specific interactions with serum proteins, including antibodies, leaking into the alveolar space. As formulations containing surfactant proteins appear to better tolerate serum inactivation, we used an excised rat lung model to compare the susceptibility to serum inactivation of a mixture of synthetic phospholipids selected from surfactant lipid constituents, Exosurf (a protein-free synthetic surfactant), Survanta [containing surfactant proteins B and C (SP-B and -C)], and a porcine surfactant (containing SP-A, -B, and -C). For each of these preparations, we used pressure/volume determinations as an in situ measure of surfactant activity and retested the same preparations after mixing with human serum, a nonspecific surfactant inactivator. Human serum inactivated porcine surfactant to a lesser extent than Survanta, Exosurf, or synthetic phospholipids. Temperature exerted a significant effect on deflation stability, as shown by a greater lung compliance in untreated, normal lungs and a larger improvement in compliance after treating lavaged lungs with synthetic phospholipids at 37 degrees C than at 22 degrees C. We conclude that surfactant containing SP-A, -B, and -C is only moderately susceptible to inactivation with whole serum and may therefore exert a greater clinical response than protein-free surfactants or those containing only SP-B and -C.

Antivirals that target the amino-terminal domain of HIV type 1 glycoprotein 41

Functional and structural studies were made to assess whether a class of antiviral agents targets the N-terminal domain of the glycoprotein 41,000 (gp41) of human immunodeficiency virus type 1 (HIV-1). Previous experiments have shown that the amino-terminal peptide (FP-I; 23 amino acids, residues 519-541) of HIV-1 gp41 is cytolytic to both human erythrocytes (non-CD4+ cells) and Hut-78 cells (CD4+ lymphocytes). Accordingly, FP-I-induced hemolysis may be used as a surrogate assay for evaluating the role of the N-terminal gp41 domain in HIV-cell interactions. Here, we studied the blocking of FP-I-induced lysis of erythrocytes by the following anti-HIV agents: (1) IgG [i.e., anti-(518-541) IgG] raised to an immunoconjugate of Arg-FP-I, (2) apolipoprotein A-1 (apo A-1) and a peptide based on apo A-1, (3) dextran sulfate, (4) gp41 peptide (residues 637-666), and (5) anionic human serum albumins. Dose-response curves indicated that their relative potency in inhibiting FP-I-induced hemolysis was approximately correlated with their previously reported anti-HIV activity. Electron spin resonance (ESR) studies showed that FP-I spin labeled at the N-terminal alanine binds to anti-(518-541) IgG, dextran sulfate, and anionic albumins. The high in vitro antiviral activity and low cytotoxicity of these agents suggest that blocking membrane-FP-I interactions offers a novel approach for AIDS therapy or prophylaxis.

Binding of GM1 ganglioside to a synthetic peptide derived from the lysosomal sphingolipid activator protein saposin B

Saposin B is a lysosomal sphingolipid activator protein which activates GM1 ganglioside hydrolysis by lysosomal beta-galactosidase. To identify the structural elements of saposin B implicated in sphingolipid binding, we studied a synthetic peptide corresponding to a predicted alpha-helix, sapB-18, spanning residues 52-69 of saposin B. The circular dichroism spectrum of sapB-18 at pH 4.4 was consistent with a 44% alpha-helix content. As shown by intrinsic Tyr fluorescence studies of sapB-18, this peptide binds the GM1 ganglioside with a Kd of about 7 microM. Thus, we suggest that a putative amphipathic alpha-helix between residues 52 and 69 of saposin B plays a major role in the recognition and binding of GM1 ganglioside by saposin B.

Binding of GM1-ganglioside to a synthetic peptide derived from the lysosomal sphingolipid-activator-protein saposin B

Saposin B is a lysosomal sphingolipid-activator-protein which activates GM1-ganglioside hydrolysis by lysosomal beta-galactosidase. To identify the structural elements of saposin B implicated in sphingolipid binding, we studied a synthetic peptide corresponding to a predicted alpha-helix, sapB-18, spanning residues 52 to 69 of saposin B. The circular dichroism spectrum of sapB-18 at pH 4.4 was consistent with a 44% alpha-helix content. As shown by intrinsic Tyr fluorescence studies of sapB-18, this peptide binds the GM1-ganglioside with a Kd of about 7 microM. Thus, we suggest that a putative amphipathic alpha-helix between residues 52 and 69 of saposin B plays a major role in the recognition and binding of GM1-ganglioside by saposin B.

Secondary structure and orientation of the surfactant protein SP-B in a lipid environment. A Fourier transform infrared spectroscopy study

Attenuated total reflection Fourier transform infrared spectroscopy was used to investigate the secondary structure of the surfactant protein SP-B. Nearly half of the polypeptide chain is folded in an alpha-helical conformation. No significant change of the secondary structure content was observed when the protein is associated to a lipid bilayer of dipalmitoylphosphatidylcholine (DPPC)/phosphatidylglycerol (PG) or of dipalmitoylphosphatidylglycerol (DPPG). The parameters related to the gamma w(CH2) vibration of the saturated acyl chains reveal no modification of the conformation or orientation of the lipids in the presence of SP-B. A model of orientation of the protein at the lipid/water interface is proposed. In this model, electrostatic interactions between charged residues of SP-B and polar headgroups of PG, and the presence of small hydrophobic alpha-helical peptide stretches slightly inside the bilayers, would maintain SP-B at the membrane surface.

Lipid bilayer surface association of lung surfactant protein SP-B, amphipathic segment detected by flow immunofluorescence

Lung surfactant protein, SP-B, and synthetic amphipathic peptides derived from SP-B were studied in model lung surfactant lipid bilayers by immunofluorescent labeling. Liposomes were formed by hydrating a lipid film on the glass viewing port of a temperature controlled flow chamber. Membrane associated peptides were detected by epifluorescence optical microscopy of the binding of anti-peptide polyclonal monospecific antibodies and FITC-conjugated secondary antibodies added to buffer contained in the flow chamber. Liposomes were bound by antibody to residues 1-25 of SP-B if formed from lipid films containing the 1-25 peptide, (SP-B(1-25)), or if SP-B(1-25) was added to already formed liposomes in buffer solution. The distribution of antigen-antibody complex was temperature dependent with aggregation occurring at greater than or equal to 30 degrees C. Surface association was not detected in liposomes formed from lipid films containing the 49-66 peptides (SP-B(49-66)), using an antibody to the 49-66 peptide, or to a synthetic version of the SP-B protein, (SP-B(1-78)), using both antibodies to the 49-66 peptide and the 1-25 peptide. The detection of SP-B(1-78) with antibody to the 49-66 sequence was only possible after reducing SP-B(1-78) with dithiothreitol, suggesting that the COOH-terminus of the full monomer protein is accessible to the bulk aqueous environment unlike the COOH-terminal peptide. The size, number of layers, and fluidity of the liposomes were not altered by protein or peptides, although they were affected by lipid composition and temperature.

Human surfactant polypeptide SP-B. Disulfide bridges, C-terminal end, and peptide analysis of the airway form

Human hydrophobic surfactant polypeptide, SP-B, purified from lung tissue by exclusion chromatography in organic solvents, has been characterized. The polypeptide is 79 residues long, has a C-terminal methionine, and contains seven Cys residues. Native human SP-B lacks free thiol groups. Three intrachain disulfide bridges were defined, linking Cys8 to Cys77, Cys11 to Cys71 and Cys35 to Cys46. The remaining Cys48 is concluded to link the protein chains into homodimers via an interchain disulfide to its counterpart in a second SP-B polypeptide. These SS bridges are identical to those in the porcine form and confirm a consestant and unique disulfide pattern for SP-B polypeptides in general.