Analysis of cis and trans acting elements required for the initiation of DNA replication in the Bacillus subtilis bacteriophage SPP1

Temporal compartmentalization of viral infection in bacterial cells

Virus infection causes major rearrangements in the subcellular architecture of eukaryotes, but its impact in prokaryotic cells was much less characterized. Here, we show that infection of the bacterium Bacillus subtilis by bacteriophage SPP1 leads to a hijacking of host replication proteins to assemble hybrid viral-bacterial replisomes for SPP1 genome replication. Their biosynthetic activity doubles the cell total DNA content within 15 min. Replisomes operate at several independent locations within a single viral DNA focus positioned asymmetrically in the cell. This large nucleoprotein complex is a self-contained compartment whose boundaries are delimited neither by a membrane nor by a protein cage. Later during infection, SPP1 procapsids localize at the periphery of the viral DNA compartment for genome packaging. The resulting DNA-filled capsids do not remain associated to the DNA transactions compartment. They bind to phage tails to build infectious particles that are stored in warehouse compartments spatially independent from the viral DNA. Free SPP1 structural proteins are recruited to the dynamic phage-induced compartments following an order that recapitulates the viral particle assembly pathway. These findings show that bacteriophages restructure the crowded host cytoplasm to confine at different cellular locations the sequential processes that are essential for their multiplication.

Viral SPP1 DNA is infectious in naturally competent Bacillus subtilis cells: inter- and intramolecular recombination pathways

A proteolyzed bacteriophage (phage) might release its DNA into the environment. Here, we define the recombination functions required to resurrect an infective lytic phage from inactive environmental viral DNA in naturally competent Bacillus subtilis cells. Using phage SPP1 DNA, a model that accounts for the obtained data is proposed (i) the DNA uptake apparatus takes up environmental SPP1 DNA, fragments it, and incorporates into the cytosol different linear single-stranded (ss) DNA molecules shorter than genome-length; (ii) the SsbA-DprA mediator loads RecA onto any fragmented linear SPP1 ssDNA, but negative modulators (RecX and RecU) promote a net RecA disassembly from these ssDNAs not homologous to the host genome; (iii) single strand annealing (SSA) proteins, DprA and RecO, anneal the SsbA- or SsbB-coated complementary strands, yielding tailed SPP1 duplex intermediates; (iv) RecA polymerized on these tailed intermediates invades a homologous region in another incomplete molecule, and in concert with RecD2 helicase, reconstitutes a complete linear phage genome with redundant regions at the ends of the molecule; and (v) DprA, RecO or viral G35P SSA, may catalyze the annealing of these terminally redundant regions, alone or with the help of an exonuclease, to produce a circular unit-length duplex viral genome ready to initiate replication.

Hexameric helicase G40P unwinds DNA in single base pair steps

Most replicative helicases are hexameric, ring-shaped motor proteins that translocate on and unwind DNA. Despite extensive biochemical and structural investigations, how their translocation activity is utilized chemo-mechanically in DNA unwinding is poorly understood. We examined DNA unwinding by G40P, a DnaB-family helicase, using a single-molecule fluorescence assay with a single base pair resolution. The high-resolution assay revealed that G40P by itself is a very weak helicase that stalls at barriers as small as a single GC base pair and unwinds DNA with the step size of a single base pair. Binding of a single ATPγS could stall unwinding, demonstrating highly coordinated ATP hydrolysis between six identical subunits. We observed frequent slippage of the helicase, which is fully suppressed by the primase DnaG. We anticipate that these findings allow a better understanding on the fine balance of thermal fluctuation activation and energy derived from hydrolysis.

Living cells store their genetic code written in molecules of DNA, with two strands of DNA twisted together to form the familiar double helix. When a cell prepares to divide, it must unwind its DNA so that the individual strands can be copied. Enzymes known as DNA helicases play a vital role in this unwinding process; yet, it is not completely clear how these enzymes move along the DNA.

Schlierf et al. have now developed a new approach to see how an individual DNA helicase called G40P unwinds the DNA double helix. The experiments used a molecular ruler to measure the DNA unwinding and showed that the helicase opened the double helix one letter of genetic code at a time. Also, specific sequence of letters within the DNA molecules could slow down and stop G40P or even cause it to move backwards.

DNA helicases work closely with other proteins inside cells to perform their task. DNA primases, for example, are enzymes that create the starting points for making new strands of DNA. Schlierf et al. found that the primase DnaG could also prevent G40P from moving backwards on the DNA, a new and unexpected function of DnaG.

These findings contribute to an ongoing debate among researchers with partially contradictory models for how DNA helicases unwind the DNA double helix. Although originally from a virus, G40P is similar to a helicase enzyme found in bacteria. Therefore, a better understanding of this helicase may lead to new ways to stop bacteria copying their DNA, which might one day become new antibiotics to treat bacterial infections.

The Revisited Genome of Bacillus subtilis Bacteriophage SPP1

Bacillus subtilis bacteriophage SPP1 is a lytic siphovirus first described 50 years ago [1]. Its complete DNA sequence was reported in 1997 [2]. Here we present an updated annotation of the 44,016 bp SPP1 genome and its correlation to different steps of the viral multiplication process. Five early polycistronic transcriptional units encode phage DNA replication proteins and lysis functions together with less characterized, mostly non-^{essential, functions. Late transcription drives synthesis of proteins necessary for SPP1 viral particles assembly and for cell lysis, together with a short set of proteins of unknown function. The extensive genetic, biochemical and structural biology studies on the molecular mechanisms of SPP1 DNA replication and phage particle assembly rendered it a model system for tailed phages research. We propose SPP1} as the reference species for a new SPP1-like viruses genus of the Siphoviridae family.

Sak and Sak4 recombinases are required for bacteriophage replication in Staphylococcus aureus

DNA-single strand annealing proteins (SSAPs) are recombinases frequently encoded in the genome of many bacteriophages. As SSAPs can promote homologous recombination among DNA substrates with an important degree of divergence, these enzymes are involved both in DNA repair and in the generation of phage mosaicisms. Here, analysing Sak and Sak4 as representatives of two different families of SSAPs present in phages infecting the clinically relevant bacterium Staphylococcus aureus, we demonstrate for the first time that these enzymes are absolutely required for phage reproduction. Deletion of the genes encoding these enzymes significantly reduced phage replication and the generation of infectious particles. Complementation studies revealed that these enzymes are required both in the donor (after prophage induction) and in the recipient strain (for infection). Moreover, our results indicated that to perform their function SSAPs require the activity of their cognate single strand binding (Ssb) proteins. Mutational studies demonstrated that the Ssb proteins are also required for phage replication, both in the donor and recipient strain. In summary, our results expand the functions attributed to the Sak and Sak4 proteins, and demonstrate that both SSAPs and Ssb proteins are essential for the life cycle of temperate staphylococcal phages.

Bacillus subtilis DNA polymerases, PolC and DnaE, are required for both leading and lagging strand synthesis in SPP1 origin-dependent DNA replication

Firmicutes have two distinct replicative DNA polymerases, the PolC leading strand polymerase, and PolC and DnaE synthesizing the lagging strand. We have reconstituted in vitro Bacillus subtilis bacteriophage SPP1 θ-type DNA replication, which initiates unidirectionally at oriL. With this system we show that DnaE is not only restricted to lagging strand synthesis as previously suggested. DnaG primase and DnaE polymerase are required for initiation of DNA replication on both strands. DnaE and DnaG synthesize in concert a hybrid RNA/DNA ‘initiation primer’ on both leading and lagging strands at the SPP1 oriL region, as it does the eukaryotic Pol α complex. DnaE, as a RNA-primed DNA polymerase, extends this initial primer in a reaction modulated by DnaG and one single-strand binding protein (SSB, SsbA or G36P), and hands off the initiation primer to PolC, a DNA-primed DNA polymerase. Then, PolC, stimulated by DnaG and the SSBs, performs the bulk of DNA chain elongation at both leading and lagging strands. Overall, these modulations by the SSBs and DnaG may contribute to the mechanism of polymerase switch at Firmicutes replisomes.

Molecular Mechanisms That Contribute to Horizontal Transfer of Plasmids by the Bacteriophage SPP1

Natural transformation and viral-mediated transduction are the main avenues of horizontal gene transfer in Firmicutes. Bacillus subtilis SPP1 is a generalized transducing bacteriophage. Using this lytic phage as a model, we have analyzed how viral replication and recombination systems contribute to the transfer of plasmid-borne antibiotic resistances. Phage SPP1 DNA replication relies on essential phage-encoded replisome organizer (G38P), helicase loader (G39P), hexameric replicative helicase (G40P), recombinase (G35P) and in less extent on the partially dispensable 5′→3′ exonuclease (G34.1P), the single-stranded DNA binding protein (G36P) and the Holliday junction resolvase (G44P). Correspondingly, the accumulation of linear concatemeric plasmid DNA, and the formation of transducing particles were blocked in the absence of G35P, G38P, G39P, and G40P, greatly reduced in the G34.1P, G36P mutants, and slightly reduced in G44P mutants. In contrast, establishment of injected linear plasmid DNA in the recipient host was independent of viral-encoded functions. DNA homology between SPP1 and the plasmid, rather than a viral packaging signal, enhanced the accumulation of packagable plasmid DNA. The transfer efficiency was also dependent on plasmid copy number, and rolling-circle plasmids were encapsidated at higher frequencies than theta-type replicating plasmids.

Virus evolution toward limited dependence on nonessential functions of the host: the case of bacteriophage SPP1

All viruses are obligate intracellular parasites and depend on certain host cell functions for multiplication. However, the extent of such dependence and the exact nature of the functions provided by the host cell remain poorly understood. Here, we investigated if nonessential Bacillus subtilis genes are necessary for multiplication of bacteriophage SPP1. Screening of a collection of 2,514 single-gene knockouts of nonessential B. subtilis genes yielded only a few genes necessary for efficient SPP1 propagation. Among these were genes belonging to the yuk operon, which codes for the Esat-6-like secretion system, including the SPP1 receptor protein YueB. In addition, we found that SPP1 multiplication was negatively affected by the absence of two other genes, putB and efp. The gene efp encodes elongation factor P, which enhances ribosome activity by alleviating translational stalling during the synthesis of polyproline-containing proteins. PutB is an enzyme involved in the proline degradation pathway that is required for infection in the post-exponential growth phase of B. subtilis, when the bacterium undergoes a complex genetic reprogramming. The putB knockout shortens significantly the window of opportunity for SPP1 infection during the host cell life cycle. This window is a critical parameter for competitive phage multiplication in the soil environment, where B. subtilis rarely meets conditions for exponential growth. Our results in combination with those reported for other virus-host systems suggest that bacterial viruses have evolved toward limited dependence on nonessential host functions.

IMPORTANCE

A successful viral infection largely depends on the ability of the virus to hijack cellular machineries and to redirect the flow of building blocks and energy resources toward viral progeny production. However, the specific virus-host interactions underlying this fundamental transformation are poorly understood. Here, we report on the first systematic analysis of virus-host cross talk during bacteriophage infection in Gram-positive bacteria. We show that lytic bacteriophage SPP1 is remarkably independent of nonessential genes of its host, Bacillus subtilis, with only a few cellular genes being necessary for efficient phage propagation. We hypothesize that such limited dependence of the virus on its host results from a constant "evolutionary arms race" and might be much more widespread than currently thought.

Bacteriophage SPP1 DNA replication strategies promote viral and disable host replication in vitro

Complex viruses that encode their own initiation proteins and subvert the host’s elongation apparatus have provided valuable insights into DNA replication. Using purified bacteriophage SPP1 and Bacillus subtilis proteins, we have reconstituted a rolling circle replication system that recapitulates genetically defined protein requirements. Eleven proteins are required: phage-encoded helicase (G40P), helicase loader (G39P), origin binding protein (G38P) and G36P single-stranded DNA-binding protein (SSB); and host-encoded PolC and DnaE polymerases, processivity factor (β₂), clamp loader (τ-δ-δ′) and primase (DnaG). This study revealed a new role for the SPP1 origin binding protein. In the presence of SSB, it is required for initiation on replication forks that lack origin sequences, mimicking the activity of the PriA replication restart protein in bacteria. The SPP1 replisome is supported by both host and viral SSBs, but phage SSB is unable to support B. subtilis replication, likely owing to its inability to stimulate the PolC holoenzyme in the B. subtilis context. Moreover, phage SSB inhibits host replication, defining a new mechanism by which bacterial replication could be regulated by a viral factor.

Characterization of the Holliday junction resolving enzyme encoded by the Bacillus subtilis bacteriophage SPP1

Recombination-dependent DNA replication, which is a central component of viral replication restart, is poorly understood in Firmicutes bacteriophages. Phage SPP1 initiates unidirectional theta DNA replication from a discrete replication origin (oriL), and when replication progresses, the fork might stall by the binding of the origin binding protein G38P to the late replication origin (oriR). Replication restart is dependent on viral recombination proteins to synthesize a linear head-to-tail concatemer, which is the substrate for viral DNA packaging. To identify new functions involved in this process, uncharacterized genes from phage SPP1 were analyzed. Immediately after infection, SPP1 transcribes a number of genes involved in recombination and replication from P_E2 and P_E3 promoters. Resequencing the region corresponding to the last two hypothetical genes transcribed from the P_E2 operon (genes 44 and 45) showed that they are in fact a single gene, re-annotated here as gene 44, that encodes a single polypeptide, named gene 44 product (G44P, 27.5 kDa). G44P shares a low but significant degree of identity in its C-terminal region with virus-encoded RusA-like resolvases. The data presented here demonstrate that G44P, which is a dimer in solution, binds with high affinity but without sequence specificity to several double-stranded DNA recombination intermediates. G44P preferentially cleaves Holliday junctions, but also, with lower efficiency, replicated D-loops. It also partially complemented the loss of RecU resolvase activity in B. subtilis cells. These in vitro and in vivo data suggest a role for G44P in replication restart during the transition to concatemeric viral replication.

Recombination-dependent concatemeric viral DNA replication

The initiation of viral double stranded (ds) DNA replication involves proteins that recruit and load the replisome at the replication origin (ori). Any block in replication fork progression or a programmed barrier may act as a factor for ori-independent remodelling and assembly of a new replisome at the stalled fork. Then replication initiation becomes dependent on recombination proteins, a process called recombination-dependent replication (RDR). RDR, which is recognized as being important for replication restart and stability in all living organisms, plays an essential role in the replication cycle of many dsDNA viruses. The SPP1 virus, which infects Bacillus subtilis cells, serves as a paradigm to understand the links between replication and recombination in circular dsDNA viruses. SPP1-encoded initiator and replisome assembly proteins control the onset of viral replication and direct the recruitment of host-encoded replisomal components at viral oriL. SPP1 uses replication fork reactivation to switch from ori-dependent θ-type (circle-to-circle) replication to σ-type RDR. Replication fork arrest leads to a double strand break that is processed by viral-encoded factors to generate a D-loop into which a new replisome is assembled, leading to σ-type viral replication. SPP1 RDR proteins are compared with similar proteins encoded by other viruses and their possible in vivo roles are discussed.

The structure of a DnaB-family replicative helicase and its interactions with primase

Helicases are essential enzymes for DNA replication, a fundamental process in all living organisms. The DnaB family are hexameric replicative helicases that unwind duplex DNA and coordinate with RNA primase and other proteins at the replication fork in prokaryotes. Here, we report the full-length crystal structure of G40P, a DnaB family helicase. The hexamer complex reveals an unusual architectural feature and a new type of assembly mechanism. The hexamer has two tiers: a three-fold symmetric N-terminal tier and a six-fold symmetric C-terminal tier. Monomers with two different conformations, termed cis and trans, come together to provide a topological solution for the dual symmetry within a hexamer. Structure-guided mutational studies indicate an important role for the N-terminal tier in binding primase and regulating primase-mediated stimulation of helicase activity. This study provides insights into the structural and functional interplay between G40P helicase and DnaG primase.

Quaternary polymorphism of replicative helicase G40P: structural mapping and domain rearrangement

Quaternary polymorphism is a distinctive structural feature of the DnaB family of replicative DNA hexameric helicases. The Bacillus subtilis bacteriophage SPP1 gene 40 product (G40P) belongs to this family. Three different quaternary states have been described for G40P homohexamers, two of them with C(3) symmetry, and the other with C(6) symmetry. We present three-dimensional reconstructions of the different architectures of G40P hexamers and a variant lacking the N-terminal domain. Comparison of the G40P and the deletion mutant structures sheds new light on the functional roles of the N and C-terminal domains, at the same time that it allows the direct structural mapping of these domains. Based on this new information, hybrid EM/X-ray models are presented for all the different symmetries. These results suggest that quaternary polymorphism of hexameric helicases may be implicated in the translocation along the DNA.

Bacillus subtilis bacteriophage SPP1 G40P helicase lacking the n-terminal domain unwinds DNA bidirectionally

Bacillus subtilis bacteriophage SPP1 G40P hexameric replicative DNA helicase unidirectionally translocates with a 5'-->3' polarity while separating the DNA strands. A G40P mutant derivative lacking the N-terminal domain (containing amino acid residues 110-442 from G40P, G40PDeltaN109) was purified and characterized. G40PDeltaN109 showed an ATPase activity that was dependent on the presence of single-stranded (ss) DNA. Unlike G40P, G40PDeltaN109 was shown to bind with similar affinity both ssDNA arms of forked structures by nuclease protection assays. In a pH-dependent manner, G40PDeltaN109 unwound a branched double-arm substrate preferentially with a 3'-->5' polarity. Our results show that the linker region and the C-terminal domain of G40P are sufficient to render an enzyme capable of encircling the ssDNA tails of the forked DNA and to unwind DNA with both 5'-->3' and 3'-->5' polarity. The presence of the N-terminal domain, which does not play an essential role in helicase action, might be required indirectly for strand discrimination and polarity of translocation.

Bacillus subtilis bacteriophage SPP1-encoded gene 34.1 product is a recombination-dependent DNA replication protein

SPP1-encoded replication and recombination proteins, involved in the early steps of the initiation of concatemeric DNA synthesis, have been analyzed. Dimeric G34.1P exonuclease degrades, with a 5' to 3' polarity and in a Mg2+-dependent reaction, preferentially linear double-stranded (ds) DNA rather than single-stranded (ss) DNA. Binding of the replisome organizer, G38P, to its cognate sites (oriDNA) halts the 5' to 3' exonucleolytic activity of G34.1P on dsDNA. The G35P recombinase increases the affinity of G34.1P for dsDNA, and stimulates G34.1P activity on dsDNA, but not on ssDNA. Then, filamented G35P promotes limited strand exchange with a homologous sequence. The ssDNA binding protein, G36P, protects ssDNA from the G34.1P exonuclease activity and stimulates G35P-catalyzed strand exchange. The data presented suggest a model for the role of G34.1P during initiation of sigma replication: G38P bound to oriDNA might halt replication fork progression, and G35P, G34.1P and G36P in concert might lead to the re-establishment of a unidirectional recombination-dependent replication that accounts for the direction of DNA packaging.

The genome and proteome of coliphage T1

The genome of enterobacterial phage T1 has been sequenced, revealing that its 50.7-kb terminally redundant, circularly permuted sequence contains 48,836 bp of nonredundant nucleotides. Seventy-seven open reading frames (ORFs) were identified, with a high percentage of small genes located at the termini of the genomes displaying no homology to existing phage or prophage proteins. Of the genes showing homologs (47%), we identified those involved in host DNA degradation (three endonucleases) and T1 replication (DNA helicase, primase, and single-stranded DNA-binding proteins) and recombination (RecE and Erf homologs). While the tail genes showed homology to those from temperate coliphage N15, the capsid biosynthetic genes were unique. Phage proteins were resolved by 2D gel electrophoresis, and mass spectrometry was used to identify several of the spots including the major head, portal, and tail proteins, thus verifying the annotation.

Transcription of the toxin genes present within the Staphylococcal phage phiSa3ms is intimately linked with the phage's life cycle

phiSa3ms, a lysogenic bacteriophage encoding the staphylococcal enterotoxins SEA, SEG, and SEK and the fibrinolytic enzyme staphylokinase (Sak), was identified in the unannotated genome sequence of the hypervirulent community-acquired Staphylococcus aureus strain 476. We found that mitomycin C induction of phiSa3ms led to increased transcription of all four virulence factors. The increase in sea and sak transcription was a result of read-through transcription from upstream latent phage promoters and an increase in phage copy number. The majority of the seg2 and sek2 transcripts were shown to initiate from the upstream phage cI promoter and hence were regulated by factors influencing cI transcription. The lysogeny module of phiSa3ms was shown to have some lambda-like features with divergent cI and cro genes. Band shift assays were used to identify binding sites for both CI and Cro within the region between these genes, suggesting a mechanism of control for the phiSa3ms lytic-lysogenic switch. Our findings suggest that the production of phage-encoded virulence factors in S. aureus may be regulated by processes that govern lysogeny.

Structural analysis of Bacillus subtilis SPP1 phage helicase loader protein G39P

The Bacillus subtilis SPP1 phage-encoded protein G39P is a loader and inhibitor of the phage G40P replicative helicase involved in the initiation of DNA replication. We have carried out a full x-ray crystallographic and preliminary NMR analysis of G39P and functional studies of the protein, including assays for helicase binding by a number of truncated mutant forms, in an effort to improve our understanding of how it both interacts with the helicase and with the phage replisome organizer, G38P. Our structural analyses reveal that G39P has a completely unexpected bipartite structure comprising a folded N-terminal domain and an essentially unfolded C-terminal domain. Although G39P has been shown to bind its G40P target with a 6:6 stoichiometry, our crystal structure and other biophysical characterization data reveal that the protein probably exists predominantly as a monomer in solution. The G39P protein is proteolytically sensitive, and our binding assays show that the C-terminal domain is essential for helicase interaction and that removal of just the 14 C-terminal residues abolishes interaction with the helicase in vitro. We propose a number of possible scenarios in which the flexibility of the C-terminal domain of G39P and its proteolytic sensitivity may have important roles for the function of G39P in vivo that are consistent with other data on SPP1 phage DNA replication.

Bacillus subtilis tau subunit of DNA polymerase III interacts with bacteriophage SPP1 replicative DNA helicase G40P

Genetic evidence suggests that the Bacillus subtilis dnaX gene only encodes for the tau subunit of both DNA polymerases III (Pol IIIs). The B.subtilis full-length protein and their mutant derivatives tau(373- 563) (lacking the N-terminal, domains I-III or amino acid residues 1-372) and tau(1-372) (lacking the C-terminal region or amino acids 373-563) have been purified. The tau protein forms tetramers, tau(373- 563) forms dimers, whereas tau(1-372), depending on the ionic strength, forms trimers or tetramers in solution. In the absence of single-stranded (ss) DNA and a nucleotide cofactor, tau interacts with the SPP1 hexameric replicative G40P DNA helicase in solution or with G40P-ATP bound to ssDNA, with a 1:1 stoichiometry. G40P(109-442), lacking the N-terminal amino acid residues 1-108, interacts with the C-terminal moiety of tau. The data indicate that the interaction of G40P with the tau subunit of Pol III, is relevant for the loading of the Pol IIIs into the SPP1 G38P-promoted open complex.

Characterization of the putative replisome organizer of the lactococcal bacteriophage r1t

Analysis of the nucleotide sequence of the genome of the lactococcal bacteriophage r1t showed that it may encode at least two proteins involved in DNA replication. On the basis of its similarity with the G38P protein encoded by the Bacillus subtilis phage SPP1, the product of orf11 (Pro11) is thought to be involved in the initiation of phage DNA replication. This protein was overexpressed in Lactococcus lactis and partially purified. Gel retardation analysis using various r1t DNA fragments indicates that Pro11 specifically binds to a sequence located within its cognate gene. DNase I footprinting showed that Pro11 protects a stretch of DNA of 47 bp. This region spans four 6-bp short direct repeats, which suggests that the region contains four binding sites for Pro11. 1,10-Phenanthroline-copper footprinting confirmed the protection of the hexamers. An asymmetric protection pattern of each strand was observed, suggesting that Pro11 contacts each DNA strand separately at contiguous hexamers. We propose a model for the binding of Pro11 to its target sites that may account for the torsion strain required for strand opening at the origin of replication.

Homologous-pairing activity of the Bacillus subtilis bacteriophage SPP1 replication protein G35P

Genetic evidence suggests that the SPP1-encoded gene 35 product (G35P) is essential for phage DNA replication. Purified G35P binds single-strand DNA (ssDNA) and double-strand (dsDNA) and specifically interacts with SPP1-encoded replicative DNA helicase G40P and SSB protein G36P. G35P promotes joint molecule formation between a circular ssDNA and a homologous linear dsDNA with an ssDNA tail. Joint molecule formation requires a metal ion but is independent of a nucleotide cofactor. Joint molecules formed during these reactions contain a displaced linear ssDNA strand. Electron microscopic analysis shows that G35P forms a multimeric ring structure in ssDNA tails of dsDNA molecules and left-handed filaments on ssDNA. G35P promotes strand annealing at the AT-rich region of SPP1 oriL on a supercoiled template. These results altogether are consistent with the hypothesis that the homologous pairing catalyzed by G35P is an integral part of SPP1 DNA replication. The loading of G40P at a d-loop (ori DNA or at any stalled replication fork) by G35P could lead to replication fork reactivation.

Bacillus subtilis bacteriophage SPP1 hexameric DNA helicase, G40P, interacts with forked DNA

SPP1-encoded replicative DNA helicase gene 40 product (G40P) is an essential product for phage replication. Hexameric G40P, in the presence of AMP-PNP, preferentially binds unstructured single-stranded (ss)DNA in a sequence-independent manner. The efficiency of ssDNA binding, nucleotide hydrolysis and the unwinding activity of G40P are affected in a different manner by different nucleotide cofactors. Nuclease protection studies suggest that G40P protects the 5' tail of a forked molecule, and the duplex region at the junction against exonuclease attack. G40P does not protect the 3' tail of a forked molecule from exonuclease attack. By using electron microscopy we confirm that the ssDNA transverses the centre of the hexameric ring. Our results show that hexameric G40P DNA helicase encircles the 5' tail, interacts with the duplex DNA at the ss-double-stranded DNA junction and excludes the 3' tail of the forked DNA.

Structure and function of hexameric helicases

Helicases are motor proteins that couple the hydrolysis of nucleoside triphosphate (NTPase) to nucleic acid unwinding. The hexameric helicases have a characteristic ring-shaped structure, and all, except the eukaryotic minichromosomal maintenance (MCM) helicase, are homohexamers. Most of the 12 known hexameric helicases play a role in DNA replication, recombination, and transcription. A human genetic disorder, Bloom's syndrome, is associated with a defect in one member of the class of hexameric helicases. Significant progress has been made in understanding the biochemical properties, structures, and interactions of these helicases with DNA and nucleotides. Cooperativity in nucleotide binding was observed in many, and sequential NTPase catalysis has been observed in two proteins, gp4 of bacteriophage T7 and rho of Escherichia coli. The crystal structures of the oligomeric T7 gp4 helicase and the hexamer of RepA helicase show structural features that substantiate the observed cooperativity, and both are consistent with nucleotide binding at the subunit interface. Models are presented that show how sequential NTP hydrolysis can lead to unidirectional and processive translocation. Possible unwinding mechanisms based on the DNA exclusion model are proposed here, termed the wedge, torsional, and helix-destabilizing models.

Improvement and optimization of two engineered phage resistance mechanisms in Lactococcus lactis

Homologous replication module genes were identified for four P335 type phages. DNA sequence analysis revealed that all four phages exhibited more than 90% DNA homology for at least two genes, designated rep2009 and orf17. One of these genes, rep2009, codes for a putative replisome organizer protein and contains an assumed origin of phage DNA replication (ori2009), which was identical for all four phages. DNA fragments representing the ori2009 sequence confer a phage-encoded resistance (Per) phenotype on lactococcal hosts when they are supplied on a high-copy-number vector. Furthermore, cloning multiple copies of the ori2009 sequence was found to increase the effectiveness of the Per phenotype conferred. A number of antisense plasmids targeting specific genes of the replication module were constructed. Two separate plasmids targeting rep2009 and orf17 were found to efficiently inhibit proliferation of all four phages by interfering with intracellular phage DNA replication. These results represent two highly effective strategies for inhibiting bacteriophage proliferation, and they also identify a novel gene, orf17, which appears to be important for phage DNA replication. Furthermore, these results indicate that although the actual mechanisms of DNA replication are very similar, if not identical, for all four phages, expression of the replication genes is significantly different in each case.

Complete nucleotide sequence, molecular analysis and genome structure of bacteriophage A118 of Listeria monocytogenes: implications for phage evolution

A118 is a temperate phage isolated from Listeria monocytogenes. In this study, we report the entire nucleotide sequence and structural analysis of its 40 834 bp DNA. Electron microscopic and enzymatic analyses revealed that the A118 genome is a linear, circularly permuted, terminally redundant collection of double-stranded DNA molecules. No evidence for cohesive ends or for a terminase recognition (pac) site could be obtained, suggesting that A118 viral DNA is packaged via a headful mechanism. Partial denaturation mapping of DNA cross-linked to the tail shaft indicated that DNA packaging proceeds from left to right with respect to the arbitrary genomic map and the direction of genes necessary for lytic development. Seventy-two open reading frames (ORFs) were identified on the A118 genome, which are apparently organized in a life cycle-specific manner into at least three major transcriptional units. N-terminal amino acid sequencing, bioinformatic analyses and functional characterizations enabled the assignment of possible functions to 26 ORFs, which included DNA packaging proteins, morphopoetic proteins, lysis components, lysogeny control-associated functions and proteins necessary for DNA recombination, modification and replication. Comparative analysis of the A118 genome structure with other bacteriophages revealed local, but sometimes extensive, similarities to a number of phages spanning a broader phylogenetic range of various low G+C host bacteria, which implies relatively recent exchange of genes or genetic modules. We have also identified the A118 attachment site attP and the corresponding attB in Listeria monocytogenes, and show that site-specific integration of the A118 prophage by the A118 integrase occurs into a host gene homologous to comK of Bacillus subtilis, an autoregulatory gene specifying the major competence transcription factor.

Molecular characterization of a phage-encoded resistance system in Lactococcus lactis

A specific fragment of the genome of Tuc2009, a temperate lactococcal bacteriophage, was shown to contain several open reading frames, whose deduced protein products exhibited similarities to proteins known to be involved in DNA replication and modification. In this way, a putative single-stranded binding protein, replisome organizer protein, topoisomerase I, and a methylase were identified. When the genetic information coding for the putative replisome organizer protein of Tuc2009, Rep2009, was supplied on a high-copy-number plasmid vector, it was shown to confer a phage-encoded resistance (Per) phenotype on its lactococcal host UC509.9. The presence of this recombinant plasmid was shown to cause a marked reduction in Tuc2009 DNA replication, suggesting that the observed phage resistance was due to titration of a factor, or factors, required for Tuc2009 DNA replication. Further experiments delineated the phage resistance-conferring region to a 160-bp fragment rich in direct repeats. Gel retardation experiments, which indicated a protein-DNA interaction between this 160-bp fragment and the Rep2009 protein, were performed. UC509.9 strains harboring plasmids with randomly mutated versions of this fragment were shown to display a variable phage resistance phenotype, depending on the position of the mutations.

The Bacillus subtilis bacteriophage SPP1 G39P delivers and activates the G40P DNA helicase upon interacting with the G38P-bound replication origin

Initiation of Bacillus subtilis bacteriophage SPP1 replication requires the phage-encoded genes 38, 39 and 40 products (G38P, G39P and G40P). G39P, which does not bind DNA, interacts with the replisome organiser, G38P, in the absence of ATP and with the ATP-activated hexameric replication fork helicase, G40P. G38P, which specifically interacts with the phage replication origin (oriL) DNA, does not seem to form a stable complex with G40P in solution. G39P when complexed with G40P-ATP inactivates the single-stranded DNA binding, ATPase and unwinding activities of G40P, and such effects are reversed by increasing amounts of G38P. Unwinding of a forked substrate by G40P-ATP is increased about tenfold by the addition of G38P and G39P to the reaction mixture. The specific protein-protein interactions between oriL-bound G38P and the G39P-G40P-ATPgammaS complex are necessary for helicase delivery to the SPP1 replication origin. Formation of G38P-G39P heterodimers releases G40P-ATPgammaS from the unstable oriL-G38P-G39P-G40P-ATPgammaS intermediate. G40P-ATPgammaS binds to the origin region, the uncomplexed G38P fraction remains bound to oriL, and the G38P-G39P heterodimer is lost from the complex. We demonstrate that G39P is a component of an oligomeric nucleoprotein complex which plays an important role in the initiation of SPP1 replication.

Complete nucleotide sequence of the 27-kilobase virulence related locus (vrl) of Dichelobacter nodosus: evidence for extrachromosomal origin

The vrl locus is preferentially associated with virulent isolates of the ovine footrot pathogen, Dichelobacter nodosus. The complete nucleotide sequence of this 27.1-kb region has now been determined. The data reveal that the locus has a G+C content much higher than the rest of the D. nodosus chromosome and contains 22 open reading frames (ORFs) encoding products including a putative adenine-specific methylase, two potential DEAH ATP-dependent helicases, and two products with sequence similarity to a bacteriophage resistance system. These ORFs are all in the same orientation, and most are either overlapping or separated by only a few nucleotides, suggesting that they comprise an operon and are translationally coupled. Expression vector studies have led to the identification of proteins that correspond to many of these ORFs. These data, in combination with evidence of insertion of vrl into the 3' end of an ssrA gene, are consistent with the hypothesis that the vrl locus was derived from the insertion of a bacteriophage or plasmid into the D. nodosus genome.

Bacillus subtilis DnaG primase stabilises the bacteriophage SPP1 G40P helicase-ssDNA complex

Purified Bacillus subtilis DnaG primase (predicted molecular mass 68.8 kDa) behaves as a monomer in solution. We demonstrate that DnaG physically interacts with bacteriophage SPP1 hexameric helicase G40P (G40P6) in the absence of ATP. G40P6-ATP forms an unstable complex with ssDNA, and by itself carries out ATP-driven translocation along a ssDNA template with low processivity. The presence of DnaG in the reaction mixture increased the helicase activity of G40P6 about 3-fold, but not the ATPase activity. The results presented here suggest that the DnaG protein stabilises the G40P6-ssDNA complexes.

Polymorphic quaternary organization of the Bacillus subtilis bacteriophage SPP1 replicative helicase (G40 P)

The Bacillus subtilis bacteriophage SPP1 gene 40 product (G40P), which belongs to the DnaB-like family of helicases, is essential for SPP1 genome replication. The active form of the enzyme is the hexamer, capable of DNA unwinding with a 5' to 3' polarity fueled by the hydrolysis of a nucleoside 5'-triphosphate. We have used electron microscopy of negatively stained G40P samples and image processing techniques to study the structural characteristics of the hexameric assemblies of this protein. Our results provide the first low resolution data on a hexameric helicase of a Gram-positive bacterial origin. A novel approach has been adopted to analyze possible symmetry heterogeneities, an unsupervised method based on a neural network self-organizing algorithm, which has led to the detection of different subclasses of G40P views. Two different quaternary states of G40P homohexamers sharing a C3 symmetry organization have been found, as well as a minor class that seems to reflect an alternative C6 symmetry architecture. These forms show general features known for other hexameric helicases, such as the ring-like arrangement of monomers around a central hole. A clear structural handedness has also been detected in some of these forms. An analysis of these quaternary states and a model for the structural organization of G40P are presented.

A short noncoding viral DNA element showing characteristics of a replication origin confers bacteriophage resistance to Streptococcus thermophilus

A 302-bp noncoding DNA fragment from the DNA replication module of phage phiSfi21 was shown to protect the Streptococcus thermophilus strain Sfi1 from infection by 17 of 25 phages. The phage-inhibitory DNA possesses two determinants, each of which individually mediated phage resistance. The phage-inhibitory activity was copy number dependent and operates by blocking the accumulation of phage DNA. Furthermore, when cloned on a plasmid, the phiSfi21 DNA acts as an origin of replication driven by phage infection. Protein or proteins in the phiSfi21-infected cells were shown to interact with this phage-inhibitory DNA fragment, forming a retarded protein-DNA complex in gel retardation assays. A model in which phage proteins interact with the inhibitory DNA such that they are no longer available for phage propagation can be used to explain the observed bacteriophage resistance. Genome analysis of phiSfi19, a phage that is insensitive to the inhibitory activity of the phiSfi21-derived DNA, led to the characterisation of a variant putative phage replication origin that differed in 14 of 302 nucleotides from that of phiSfi21. The variant origin was cloned and exhibited an inhibitory activity toward phages that were insensitive to the phiSfi21-derived DNA.

Temporal transcription of the lactococcal temperate phage TP901-1 and DNA sequence of the early promoter region

Transcriptional analysis by Northern blotting identified clusters of early, middle and late transcribed regions of the temperate lactococcal bacteriophage TP901-1 during one-step growth experiments. The latent period was found to be 65 min and the burst size 40 +/- 10. The eight early transcripts, all mapping in a 13 kb region adjacent to the attachment site of TP901-1, were present at maximal levels 10 min after infection. The four middle transcripts, observed at maximal levels 30 min after infection, are all located within a 2 kb region at the distal end of the early transcripts. The late class of transcripts were detected 40 min after infection and the amounts of these transcripts increased with time. The late transcripts were localized to the 13 kb region adjacent to the 2 kb middle transcribed region. The sequence of almost 4 kb of the early region was determined, allowing a detailed transcriptional map for the early region of which in total 6.4 kb was sequenced. Sequence analysis of the early region revealed two closely positioned but divergently orientated promoters, PL and PR, in accordance with the orientation of the ORFs and the transcriptional map. Nine ORFs were found, and similarities to a phage repressor, a single-stranded DNA-binding protein, a topoisomerase, a Cro-like protein and two other phage proteins of unknown function were detected. The gene arrangement in the early transcribed region of TP901-1 thus consists of two transcriptional units: one from PR containing four genes, of which at least two (the integrase gene and putative repressor) are needed for lysogeny, and the divergent and longer transcriptional unit from PL, presumably encoding functions required for the lytic life cycle. ORFs with homology to proteins involved in DNA replication were identified on the latter transcriptional unit.

Replication terminator protein-based replication fork-arrest systems in various Bacillus species

The replication terminator protein (RTP) of Bacillus subtilis interacts with its cognate DNA terminators to cause replication fork arrest, thereby ensuring that the forks approaching one another at the conclusion of a round of replication meet within a restricted terminus region. A similar situation exists in Escherichia coli, but it appears that the fork-arrest systems in these two organisms have evolved independently of one another. In the present work, RTP homologs in four species closely related to B. subtilis (B. atrophaeus, B. amyloliquefaciens, B. mojavensis, and B. vallismortis) have been identified and characterized. An RTP homolog could not be identified in another closely related species, B. licheniformis. The nucleotide and amino acid changes from B. subtilis among the four homologs are consistent with the recently established phylogenetic tree for these species. The GC contents of the rtp genes raise the possibility that these organisms arose within this branch of the tree by horizontal transfer into a common ancestor after their divergence from B. licheniformis. Only 5 amino acid residue positions were changed among the four homologs, despite an up to 17.2% change in the nucleotide sequence, a finding that highlights the importance of the precise folded structure to the functioning of RTP. The absence of any significant change in the proposed DNA-binding region of RTP emphasizes the importance of its high affinity for the DNA terminator in its functioning. By coincidence, the single change (E30K) found in the B. mojavensis RTP corresponds exactly to that purposefully introduced by others into B. subtilis RTP to implicate a crucial role for E30 in the fork-arrest mechanism. The natural occurrence of this variant is difficult to reconcile with such an implication, and it was shown directly that RTP.E30K functions normally in fork arrest in B. subtilis in vivo. Additional DNA terminators were identified in the new RTP homolog-containing strains, allowing the definition of a Bacillus terminator consensus and identification of two more terminators in the B. subtilis 168 genome sequence to bring the total to nine.

The complete nucleotide sequence and functional organization of Bacillus subtilis bacteriophage SPP1

The complete nucleotide sequence of the B. subtilis bacteriophage SPP1 is described. The genome is 44,007 bp in size and has a base composition of 43.7% dG + dC. Only 32.2 kb are essential for phage amplification under laboratory conditions. Transcription using only the 'heavy strand' is asymmetric. Eighty-one orfs organized in five early and four late operons were identified. Experiments have shown that 25 orfs are essential. Of the remaining orfs, functions could be predicted for the products of five of the orfs on the basis of comparison of the deduced amino acid sequence to known proteins. Intergenic regions include most of the 5 PE and the 4 PL promoters. Transcripts are polycistronic. Transcription from the PE promoters is mediated by host RP, whereas recognition of the PL promoters requires an additional unidentified phage-encoded product. Translation of mRNA transcribed from most of the orfs seems to be initiated independently, each from its own ribosomal binding and initiation site, although a few cases of coupled translation have been reported. The organization of SPP1 genes involved in the replication, DNA packaging and phage assembly proteins resembles the organization of genes of equivalent regions of different E. coli double-stranded DNA phages. Absence of aa sequence similarity between analogous proteins of different phages suggested that the conserved gene organization is representative of a primordial bacteriophage.

The replisome organizer (G38P) of Bacillus subtilis bacteriophage SPP1 forms specialized nucleoprotein complexes with two discrete distant regions of the SPP1 genome

Initiation of Bacillus subtilis bacteriophage SPP1 DNA replication requires the products of genes 38, 39 and 40 (G38P, G39P and G40P). G38P specifically binds two discrete regions, which are 32.1 kb apart in a linear map of the SPP1 genome. One of these target sites, which maps at the left end of the phage genome, within gene 38, was shown to function as an origin of replication and was therefore termed left origin (oriL). The other site, which lies within a non-coding segment in the late transcribed region on the right end of the genome, was termed oriR. Both sites contain two types of repeated elements (termed Box AB and A + T-rich region). The K(app) for the G38P-oriL DNA and G38P-oriR DNA complexes was estimated to be 1 nM and 4 nM, respectively. G38P binds to the distant oriL and oriR sites cooperatively. DNase I footprinting experiments showed protection by G38P in Box AB, but not in the A + T-rich region. Electron microscopy analysis showed that G38P forms a higher-order nucleoprotein structure with the SPP1 oriL and oriR sites through protein-protein interaction. G38P binding at its cognate sites does not seem to modify the length of the DNA, but to bend it. These results suggest that G38P forms a nucleoprotein complex on the regions where the SPP1 replication origins were previously predicted.

Head morphogenesis genes of the Bacillus subtilis bacteriophage SPP1

We have identified and characterized the phage cistrons required for assembly of SPP1 heads. A DNA fragment containing most of the head morphogenesis genes was cloned and sequenced. The 3'-end of a previously identified gene (gene 6) and eight complete open reading frames (7 to 15) were predicted. We have assigned genes 7, 8, 9, 11, 12, 13, 14 and 15 to these orfs by correlating genetic and immunological data with DNA and protein sequence information. G7P was identified as a minor structural component of proheads and heads, G11P as the scaffold protein, G12P and G15P as head minor proteins and G13P as the coat protein. Characterization of intermediates in head assembly, which accumulate during infection with mutants deficient in DNA packaging or in morphogenetic genes, allowed the definition of the head assembly pathway. No proteolytic processing of any of the head components was detected. Removal of G11P by mutation leads to the accumulation of prohead-related structures and aberrant particles which are similar to the assemblies formed by purified G13P in the absence of other phage-encoded proteins. The native molecular masses of G11P and G13P are about 350 kDa and larger than 5000 kDa, respectively (predicted molecular masses 23.4 kDa and 35.3 kDa, respectively). G13P, upon denaturation and renaturation, assembles from protomers into some prohead-related structures. The organization of the DNA packaging and head genes of SPP1 resembles the organization of genes in the analogous regions of phage lambda and P22.

Bacillus subtilis bacteriophage SPP1 terminase has a dual activity: it is required for the packaging initiation and represses its own synthesis

The B. subtilis bacteriophage SPP1 terminase, encoded by genes 1 and 2, is required for the initiation of headful packaging. The DNA segment to which gene 1 product (G/P) binds includes the pacL and pacR sites and the late PL1 and PL2 promoters from which genes 1 to 7 are transcribed. When SPP1wt or SPP1sus115 (gene 6-) phages were used to infect a B. subtilis sup0 strain, the gene 1 to 7 mRNA synthesis was reduced at late times of infection. This was not observed, however, when either chloramphenicol was added 7 min after infection with SPP1wt or when SPP1sus114 (gene 1-) or SPP1sus19 (gene 2-) were used to infect B. subtilis sup0 cells. These results suggest that the terminase enzyme functions as a repressor of its own transcription. G/P and B. subtilis RNA polymerase (RP) bind to the pacL segment, which contains the PL1 and PL2 promoter region. The binding of G/P to the pacL site does not seem to exclude RP from the promoters, despite of the overlapping of their binding sites. It is likely that the terminase protein does not repress transcription by a mere steric hindrance of RP binding.

The early gene region completes the nucleotide sequence of Lactobacillus delbrueckii subsp. lactis phage LL-H

Transcription of genes from phage LL-H can be divided into an early phase and a late phase. The early gene region was located in a 5.9-kb segment of the phage LL-H genome and it was part of the sequence that completed the phage LL-H genome sequence, 34 659 bp in size. Phage LL-H is the first completely sequenced Lactobacillus phage. In the main coding strand of phage LL-H genome 48 putative ORFs could be detected, but only four small putative ORFs could be found in the opposite strand. The ORFs covered 85.6% of the main coding strand. Function could be assigned to eleven of the phage LL-H ORFs either by biochemical analyses or by database homologies. A single-strand-binding protein, SSB, was detected in addition to the previously determined functions (small and large subunits of terminase, intron-encoded endonuclease, six structural proteins, phage lysin). For 15 additional ORFs of phage LL-H homology was detected in databases, but no function could be inferred for them.

Sequence analysis and molecular characterization of the temperate lactococcal bacteriophage r1t

The temperate lactococcal bacteriophage r1t was isolated from its lysogenic host and its genome was subjected to nucleotide sequence analysis. The linear r1t genome is composed of 33,350 bp and was shown to possess 3' staggered cohesive ends. Fifty open reading frames (ORFs) were identified which are, probably, organized in a life-cycle-specific manner. Nucleotide sequence comparisons, N-terminal amino acid sequencing and functional analyses enabled the assignment of possible functions to a number of DNA sequences and ORFs. In this way, ORFs specifying regulatory proteins, proteins involved in DNA replication, structural proteins, a holin, a lysin, an integrase, and a dUTPase were putatively identified. One ORF seems to be contained within a self-splicing group I intron. In addition, the bacteriophage att site required for site-specific integration into the host chromosome was determined.