Preparation of porous and nonporous biodegradable polymeric hollow microspheres

The role of porosity in polyester microparticles for drug delivery

Polymer microparticles are a cornerstone in the field of injectable sustained delivery systems: They allow the entrapment of various types of hydrophobic or hydrophilic drugs including biopharmaceuticals. Microparticles can be prepared from the material of choice and tailored to specific target sizes. Importantly, they can retain the drug at the local administration site to achieve a sustained drug release for long-term therapeutic effects. This review focuses on the role of porosity of microparticles as a tremendously important property. Principles to prepare porous carriers via different techniques and additives are discussed, emphasizing that porosity is not a static property but can be dynamic, e.g., for particles from polylactide or poly(lactide-co-glycolide). Considering the contribution of porosity in the overall assessment of drug carrier systems, as well as their manipulation/alteration post-production such as by pore closing, will enlarge the understanding of polymer microparticles as an important class of modern pharmaceutical dosage forms.

Application of Microsponge Drug Platform to Enhance Methotrexate Administration in Rheumatoid Arthritis Therapy

BACKGROUND/OBJECTIVES

This study aimed to develop a novel nanotechnological slow-release drug delivery platform based on hyaluronic acid Microsponge (MSP) for the subcutaneous administration of methotrexate (MTX) in the treatment of rheumatoid arthritis (RA). RA is a chronic autoimmune disease characterized by joint inflammation and damage, while MTX is a common disease-modifying antirheumatic drug (DMARD), the conventional use of which is limited by adverse effects and the lack of release control.

METHODS

MSP were synthesized as freeze-dried powder to increase their stability and allow for a facile reconstitution prior to administration and precise MTX dosing.

RESULTS

A highly stable and rounded-shaped micrometric MSP, characterized by an open porosity inner structure, achieved both a high MTX loading efficiency and a slow release of MTX after injection. Our drug release assays indeed demonstrated a characteristic drug release profile consisting of a very limited burst release in the first few hours, followed by a slow release of MTX sustained for over a month. By means of a preclinical rat model of RA, the administration of MTX-loaded MSP proved to nearly double the therapeutic efficacy compared to sole MTX, according to a steep reduction in arthritic score compared to control groups. The preclinical study was replicated twice to confirm this improvement in performance and the safety profile of the MSP.

CONCLUSIONS

This study suggests that the MSP drug delivery platform holds significant potential for clinical use in improving RA therapy by enabling the sustained slow release of MTX, thereby enhancing therapeutic outcomes and minimizing side effects associated with conventional burst-release drug administration.

Design of Tailor-Made Biopolymer-Based Capsules for Biological Application by Combining Porous Particles and Polysaccharide Assembly

Various approaches have been described in the literature to demonstrate the possibility of designing biopolymer particles with well-defined characteristics, such as size, chemical composition or mechanical properties. From a biological point of view, the properties of particle have been related to their biodistribution and bioavailability. Among the reported core-shell nanoparticles, biopolymer-based capsules can be used as a versatile platform for drug delivery purposes. Among the known biopolymers, the present review focuses on polysaccharide-based capsules. We only report on biopolyelectrolyte capsules fabricated by combining porous particles as a template and using the layer-by-layer technique. The review focuses on the major steps of the capsule design, i.e., the fabrication and subsequent use of the sacrificial porous template, multilayer coating with polysaccharides, the removal of the porous template to obtain the capsules, capsule characterisation and the application of capsules in the biomedical field. In the last part, selected examples are presented to evidence the major benefits of using polysaccharide-based capsules for biological purposes.

Efficient and prolonged antibacterial activity from porous PLGA microparticles and their application in food preservation

Simple addition of a minute quantity of non-toxic mustard oil in water/oil/water (W/O/W) double emulsion led to a porous morphology at the surface as well as in the interior of the biodegradable PLGA (Poly(l-lactide-co-glycolide)) microparticles. An attempt was made to understand the mechanism of pore formation by analyzing optical micrographs and SEM images in addition to solution viscosity of organic phase and interfacial tension values between organic and aqueous phases. The origin of surface porosity was thought to come from the inclusion of inner water droplet, stabilized by heteroaggregation of mustard oil and PLGA chains along with PVA (polyvinyl alcohol), to the solidifying polymer skin. The surface pores did not arise in absence of mustard oil. The encapsulation and release of antibacterial active (benzoic acid) from porous PLGA particles was studied in PBS buffer (pH 7) at 37 °C for 60 days. The release profiles were well-controlled in nature, and found to be influenced by surface porosity of the particles that can be manipulated by varying the amount of mustard oil. The release mechanism can well be explained with the help of power law model. Strikingly, in liquid medium, porous particles were found completely suppressing the growth of Escherichia coli and Staphylococcus aureus for a prolonged period of 60 days. The strong antimicrobial activity (100% inhibition of bacterial growth) in porous particles can be linked to the enhanced surface area due to the formation of micro/nano pores which accelerate the hydrolytic degradation of PLGA to release lactic acid/glycolic acid (antibacterial) in addition to encapsulated antibacterial (benzoic acid). In a food model system, the shelf life of the water melon juice was also found to be enhanced by suppressing the growth of the natural microbes in comparison to control.

Pharmaceutically modified subtilisins withstand acidic conditions and effectively degrade gluten in vivo

Detoxification of gluten immunogenic epitopes is a promising strategy for the treatment of celiac disease. Our previous studies have shown that these epitopes can be degraded in vitro by subtilisin enzymes derived from Rothia mucilaginosa, a natural microbial colonizer of the oral cavity. The challenge is that the enzyme is not optimally active under acidic conditions as encountered in the stomach. We therefore aimed to protect and maintain subtilisin-A enzyme activity by exploring two pharmaceutical modification techniques: PEGylation and Polylactic glycolic acid (PLGA) microencapsulation. PEGylation of subtilisin-A (Sub-A) was performed by attaching methoxypolyethylene glycol (mPEG, 5 kDa). The PEGylation protected subtilisin-A from autolysis at neutral pH. The PEGylated Sub-A (Sub-A-mPEG) was further encapsulated by PLGA. The microencapsulated Sub-A-mPEG-PLGA showed significantly increased protection against acid exposure in vitro. In vivo, gluten immunogenic epitopes were decreased by 60% in the stomach of mice fed with chow containing Sub-A-mPEG-PLGA (0.2 mg Sub-A/g chow) (n = 9) compared to 31.9% in mice fed with chow containing unmodified Sub-A (n = 9). These results show that the developed pharmaceutical modification can protect Sub-A from auto-digestion as well as from acid inactivation, thus rendering the enzyme more effective for applications in vivo.

Repurposing rosiglitazone, a PPAR-γ agonist and oral antidiabetic, as an inhaled formulation, for the treatment of PAH

Peroxisome-proliferator-activated-receptor-gamma (PPAR-γ) is implicated, in some capacity, in the pathogenesis of pulmonary arterial hypertension (PAH). Rosiglitazone, an oral antidiabetic and PPAR-γ agonist, has the potential to dilate pulmonary arteries and to attenuate arterial remodeling in PAH. Here, we sought to test the hypothesis that rosiglitazone can be repurposed as inhaled formulation for the treatment of PAH. We have tested this conjecture by preparing and optimizing poly(lactic-co-glycolic) acid (PLGA) based particles of rosiglitazone, assessing the drug particles for pulmonary absorption, investigating the efficacy of the plain versus particulate drug formulation in improving the respiratory hemodynamics in PAH animals, and finally studying the effect of the drug in regulating the molecular markers associated with PAH pathogenesis. The optimized particles were slightly porous and spherical, and released 87.9% ± 6.7% of the drug in 24 h. The elimination half-life of the drug formulated in PLGA particles was 2.5-fold greater than that of the plain drug administered via the same route at the same dose. The optimized formulation, given via the pulmonary route, produced pulmonary selective vasodilation in PAH animals, but oral rosiglitazone had no effect in pulmonary hemodynamics. Rosiglitazone ameliorates the pathogenesis of PAH by balancing the molecular regulators involved in the vasoconstriction and vasodilation of human pulmonary arterial smooth muscle cells. All in all, data generated using intact animal and cellular models point to the conclusion that PLGA particles of an antidiabetic drug can be used for the treatment of a different disease, PAH.

A signal-amplifiable biochip quantifies extracellular vesicle-associated RNAs for early cancer detection

Detection of extracellular vesicle (EV)-associated RNAs with low expression levels in early-stage cancer remains a challenge and is highly valuable. Here, we report a nanoparticle-based biochip that could capture circulating EVs without isolation, brighten encapsulated RNAs, and amplify fluorescence signals in situ in a single step. We confine catalyzed hairpin DNA circuit (CHDC) in cationic lipid-polymer hybrid nanoparticles (LPHNs) that are tethered on a chip. LPHN features a core-shell-corona structure that facilitates the transfer and mixing of CHDC with EV-associated RNAs when forming the LPHN–EV nanocomplex. CHDC is triggered upon target RNA binding and quickly generate amplified signals. The signal amplification efficiency of LPHN–CHDC is demonstrated in artificial EVs, cancer cells, and cancer cell-derived EVs. We show that LPHN–CHDC biochip with signal amplification capability could selectively and sensitively identify low expression glypican-1 mRNA in serum EVs, distinguishing patients with early- and late-stage pancreatic cancer from healthy donors and patients with benign pancreatic disease.

Extracellular vesicles (EV)-associated RNAs are serum biomarkers potentially exploitable for early cancer diagnosis. Here the authors develop a catalyzed hairpin DNA circuit within a cationic lipid-polymer hybrid nanoparticle that can detect low–level EV-associated RNAs in early stage cancer patients.

Tunable Volumetric Density and Porous Structure of Spherical Poly-ε-caprolactone Microcarriers, as Applied in Human Mesenchymal Stem Cell Expansion

Polymeric microspheres may serve as microcarrier (MC) matrices, for the expansion of anchorage-dependent stem cells. They require surface properties that promote both initial cell adhesion and the subsequent spreading of cells, which is a prerequisite for successful expansion. When implemented in a three-dimensional culture environment, under agitation, their suspension under low shear rates depends on the MCs having a modest negative buoyancy, with a density of 1.02-1.05 g/cm³. Bioresorbable poly-ε-caprolactone (PCL), with a density of 1.14 g/cm³, requires a reduction in volumetric density, for the microspheres to achieve high cell viability and yields. Uniform-sized droplets, from solutions of PCL dissolved in dichloromethane (DCM), were generated by coaxial microfluidic geometry. Subsequent exposure to ethanol rapidly extracted the DCM solvent, solidifying the droplets and yielding monodisperse microspheres with a porous structure, which was demonstrated to have tunable porosity and a hollow inner core. The variation in process parameters, including the molecular weight of PCL, its concentration in DCM, and the ethanol concentration, served to effectively alter the diffusion flux between ethanol and DCM, resulting in a broad spectrum of volumetric densities of 1.04-1.11 g/cm³. The solidified microspheres are generally covered by a smooth thin skin, which provides a uniform cell culture surface and masks their internal porous structure. When coated with a cationic polyelectrolyte and extracellular matrix protein, monodisperse microspheres with a diameter of approximately 150 μm and densities ranging from 1.05-1.11 g/cm³ are capable of supporting the expansion of human mesenchymal stem cells (hMSCs). Validation of hMSC expansion was carried out with a positive control of commercial Cytodex 3 MCs and a negative control of uncoated low-density PCL MCs. Static culture conditions generated more than 70% cell attachment and similar yields of sixfold cell expansion on all coated MCs, with poor cell attachment and growth on the negative control. Under agitation, coated porous microspheres, with a low density of 1.05 g/cm³, achieved robust cell attachment and resulted in high cell yields of ninefold cell expansion, comparable with those generated by commercial Cytodex 3 MCs.

Inhaled sildenafil as an alternative to oral sildenafil in the treatment of pulmonary arterial hypertension (PAH)

The practice of treating PAH patients with oral or intravenous sildenafil suffers from the limitations of short dosing intervals, peripheral vasodilation, unwanted side effects, and restricted use in pediatric patients. In this study, we sought to test the hypothesis that inhalable poly(lactic-co-glycolic acid) (PLGA) particles of sildenafil prolong the release of the drug, produce pulmonary specific vasodilation, reduce the systemic exposure of the drug, and may be used as an alternative to oral sildenafil in the treatment of PAH. Thus, we prepared porous PLGA particles of sildenafil using a water-in-oil-in-water double emulsion solvent evaporation method with polyethyleneimine (PEI) as a porosigen and characterized the formulations for surface morphology, respirability, in-vitro drug release, and evaluated for in vivo absorption, alveolar macrophage uptake, and safety. PEI increased the particle porosity, drug entrapment, and produced drug release for 36h. Fluorescent particles showed reduced uptake by alveolar macrophages. The polymeric particles were safe to rat pulmonary arterial smooth muscle cell and to the lungs, as evidenced by the cytotoxicity assay and analyses of the injury markers in the bronchoalveolar lavage fluid, respectively. Intratracheally administered sildenafil particles elicited more pulmonary specific and sustained vasodilation in SUGEN-5416/hypoxia-induced PAH rats than oral, intravenous, or intratracheal plain sildenafil did, when administered at the same dose. Overall, true to the hypothesis, this study shows that inhaled PLGA particles of sildenafil can be administered, as a substitute for oral form of sildenafil, at a reduced dose and longer dosing interval.

Preparation of hollow polyurethane microspheres with tunable surface structures via electrospraying technology

For the first time, electrospraying was employed to fabricate hollow polyurethane microspheres with controlled size and tunable surface morphology.

Methylamine acts as excellent chemical trigger to Harden emulsion droplets into spongy PLGA microspheres

A unique approach using methylamine as a chemical trigger leads to the formation of sponge-like PLGA microspheres with extreme porosity.

Preparation and in vivo evaluation of insulin-loaded biodegradable nanoparticles prepared from diblock copolymers of PLGA and PEG

The aim of this study was to design a controlled release vehicle for insulin to preserve its stability and biological activity during fabrication and release. A modified, double emulsion, solvent evaporation, technique using homogenisation force optimised entrapment efficiency of insulin into biodegradable nanoparticles (NP) prepared from poly (DL-lactic-co-glycolic acid) (PLGA) and its PEGylated diblock copolymers. Formulation parameters (type of polymer and its concentration, stabiliser concentration and volume of internal aqueous phase) and physicochemical characteristics (size, zeta potential, encapsulation efficiency, in vitro release profiles and in vitro stability) were investigated. In vivo insulin sensitivity was tested by diet-induced type II diabetic mice. Bioactivity of insulin was studied using Swiss TO mice with streptozotocin-induced type I diabetic profile. Insulin-loaded NP were spherical and negatively charged with an average diameter of 200-400 nm. Insulin encapsulation efficiency increased significantly with increasing ratio of co-polymeric PEG. The internal aqueous phase volume had a significant impact on encapsulation efficiency, initial burst release and NP size. Optimised insulin NP formulated from 10% PEG-PLGA retained insulin integrity in vitro, insulin sensitivity in vivo and induced a sustained hypoglycaemic effect from 3h to 6 days in type I diabetic mice.

Polymeric nanoparticles and microparticles for the delivery of peptides, biologics, and soluble therapeutics

Biologically derived therapeutics, or biologics, are the most rapidly growing segment of the pharmaceutical marketplace. However, there are still unmet needs in improving the delivery of biologics. Injectable polymeric nanoparticles and microparticles capable of releasing proteins and peptides over time periods as long as weeks or months have been a major focus in the effort to decrease the frequency of administration. These particle systems fit broadly into two categories: those composed of hydrophilic and those composed of hydrophobic polymeric scaffolds. Here we review the factors that contribute to the slow and controlled release from each class of particle, as well as the effects of synthesis parameters and product design on the loading, encapsulation efficiency, biologic integrity, and release profile. Generally, hydrophilic scaffolds are ideal for large proteins while hydrophobic scaffolds are more appropriate for smaller biologics without secondary structure. Here we also introduce a Flash NanoPrecipitation method that has been adopted for encapsulating biologics in nanoparticles (40-200nm) at high loadings (50-75wt.%) and high encapsulation efficiencies. The hydrophilic gel interior and hydrophobic shell provide an opportunity to combine the best of both classes of injectable polymeric depots.

Synthesis and characterization of nanofibrous hollow microspheres with tunable size and morphology via thermally induced phase separation technique

Nanofibrous hollow microspheres with tunable size and morphology were fabricated by using the thermally induced phase separation technique.

In vivo evaluation of different formulation strategies for sustained release injectables of a poorly soluble HIV protease inhibitor

At present no scientific rationale exists for selecting a particular enabling strategy to formulate a poorly water-soluble drug, although this is crucial as it will influence the in vivo performance of the resulting formulation. This study provides an insight into this complicated decision making process for a poorly soluble human immunodeficiency virus (HIV) protease inhibitor based upon in vivo test results. A formulation strategy based on the molecular dispersion of this active pharmaceutical ingredient (API) into a biphasic matrix consisting of water-insoluble poly(lactic-co-glycolic acid) (PLGA) and water-soluble polyvinylpyrrolidone (PVP) was evaluated. The long-term in vivo performance of this strategy was compared to that of other solubility enhancing approaches by evaluating exposure of the API in male Beagle dogs. Solid dispersions, based on a PLGA/PVP matrix, were compared to solid dispersions in a pure PLGA matrix. Additionally these solid dispersion strategies were compared to the strategy of particle size reduction by means of an API microsuspension. The in vivo performance of the various formulations over a period of 28days after intramuscular injection was evaluated by the observed initial burst release, plasma concentration-time profiles, time at which maximum plasma levels were reached and the estimated bioavailability. Compared to the other formulation strategies assessed, it was concluded that the addition of PVP in a PLGA matrix resulted in vivo in a more sustained release as well as a higher amount of drug released from the polymeric matrix. This was explained based on the structure of these binary PLGA/PVP matrices where the pore network originating from rapidly dissolving PVP plays a key role. Moreover, the results suggest that the API release from this type of formulation could be delayed by increasing the amount of PLGA in the formulation.

IGF-1 release kinetics from chitosan microparticles fabricated using environmentally benign conditions

The main objective of this study is to maximize growth factor encapsulation efficiency into microparticles. The novelty of this study is to maximize the encapsulated growth factors into microparticles by minimizing the use of organic solvents and using relatively low temperatures. The microparticles were fabricated using chitosan biopolymer as a base polymer and cross-linked with tripolyphosphate (TPP). Insulin like-growth factor-1 (IGF-1) was encapsulated into microparticles to study release kinetics and bioactivity. In order to authenticate the harms of using organic solvents like hexane and acetone during microparticle preparation, IGF-1 encapsulated microparticles prepared by the emulsification and coacervation methods were compared. The microparticles fabricated by emulsification method have shown a significant decrease (p<0.05) in IGF-1 encapsulation efficiency, and cumulative release during the two-week period. The biocompatibility of chitosan microparticles and the bioactivity of the released IGF-1 were determined in vitro by live/dead viability assay. The mineralization data observed with von Kossa assay, was supported by mRNA expression levels of osterix and runx2, which are transcription factors necessary for osteoblasts differentiation. Real time RT-PCR data showed an increased expression of runx2 and a decreased expression of osterix over time, indicating differentiating osteoblasts. Chitosan microparticles prepared in optimum environmental conditions are a promising controlled delivery system for cells to attach, proliferate, differentiate and mineralize, thereby acting as a suitable bone repairing material.

A short term quality control tool for biodegradable microspheres

Accelerated in vitro release testing methodology has been developed as an indicator of product performance to be used as a discriminatory quality control (QC) technique for the release of clinical and commercial batches of biodegradable microspheres. While product performance of biodegradable microspheres can be verified by in vivo and/or in vitro experiments, such evaluation can be particularly challenging because of slow polymer degradation, resulting in extended study times, labor, and expense. Three batches of Leuprolide poly(lactic-co-glycolic acid) (PLGA) microspheres having varying morphology (process variants having different particle size and specific surface area) were manufactured by the solvent extraction/evaporation technique. Tests involving in vitro release, polymer degradation and hydration of the microspheres were performed on the three batches at 55°C. In vitro peptide release at 55°C was analyzed using a previously derived modification of the Weibull function termed the modified Weibull equation (MWE). Experimental observations and data analysis confirm excellent reproducibility studies within and between batches of the microsphere formulations demonstrating the predictability of the accelerated experiments at 55°C. The accelerated test method was also successfully able to distinguish the in vitro product performance between the three batches having varying morphology (process variants), indicating that it is a suitable QC tool to discriminate product or process variants in clinical or commercial batches of microspheres. Additionally, data analysis utilized the MWE to further quantify the differences obtained from the accelerated in vitro product performance test between process variants, thereby enhancing the discriminatory power of the accelerated methodology at 55°C.

Dynamic cell culture on porous biopolymer microcarriers in a spinner flask for bone tissue engineering: a feasibility study

Porous microspherical carriers have great promise for cell culture and tissue engineering. Dynamic cultures enable more uniform cell population and effective differentiation than static cultures. Here we applied dynamic spinner flask culture for the loading and multiplication of cells onto porous biopolymer microcarriers. The abilities of the microcarriers to populate cells and to induce osteogenic differentiation were examined and the feasibility of in vivo delivery of the constructs was addressed. Over time, the porous microcarriers enabled cell adhesion and expansion under proper dynamic culture conditions. Osteogenic markers were substantially expressed by the dynamic cell cultures. The cell-cultured microcarriers implanted in the mouse subcutaneous tissue for 4 weeks showed excellent tissue compatibility, with minimal inflammatory signs and significant induction of bone tissues. This first report on dynamic culture of porous biopolymer microcarriers providing an effective tool for bone tissue engineering.

Impact of surfactant selection on the formulation and characterization of microparticles for pulmonary drug delivery

The effect of suspension stabilizers, internal aqueous phase volume and polymer amount were investigated for the production of protein loaded poly(d,l lactide-co-glycolide) (PLGA) microparticles suitable for pulmonary drug delivery. PLGA microparticles were produced adopting water-in-oil-in-water (W/O/W) solvent evaporation technique and were investigated for surface morphology, particle size, encapsulation efficiency (EE%) and in-vitro release profile. Porous surface morphologies with a narrow size distribution were observed when employing 0.5 ml internal aqueous phase; 23.04 µm (± 0.98), 15.05 µm (± 0.27) and 22.89 µm (±0.41) for PVA, Tween 80 and oleic acid. Porous microparticles exhibited increased size and reduction in EE% with increasing internal aqueous phase, with non-porous microparticles produced when adopting 2.0 ml internal aqueous phase. The selection of stabilizer influences the size of the pores formed thus offers potential for the aerodynamic properties of the microparticles to be manipulated to achieve suitable aerosolization characteristics for pulmonary delivery of proteins.

Effect of polymer porosity on aqueous self-healing encapsulation of proteins in PLGA microspheres

Self-healing (SH) poly(lactic-co-glycolic acid) (PLGA) microspheres are a unique class of functional biomaterials capable of microencapsulating process-sensitive proteins by simple mixing and heating the drug-free polymer in aqueous protein solution. Drug-free SH microspheres of PLGA 50/50 with percolating pore networks of varying porosity (ϵ = 0.49-73) encapsulate increasing lysozyme (≈1 to 10% w/w) with increasing ϵ, with typically ≈20 to 25% pores estimated accessible to entry by the enzyme from the external solution. Release kinetics of lysozyme under physiological conditions is continuous over more than two weeks and most strongly influenced by ϵ and protein loading before reaching a lag phase until 28 d at the study completion. Recovered enzyme after release is typically predominantly monomeric and active. Formulations containing acid-neutralizing MgCO3 at ≥ 4.3% exhibit >97% monomeric and active protein after the release with full mass balance recovery. Hence, control of SH polymer ϵ is a key parameter to development of this new class of biomaterials.

Release of a wound-healing agent from PLGA microspheres in a thermosensitive gel

The purpose of this research was to develop a topical microsphere delivery system in a thermosensitive 20% poloxamer 407 gel (Pluronic F127) to control release of KSL-W, a cationic antimicrobial decapeptide, for a period of 4-7 days for potential application in combat related injuries. KSL-W loaded microsphere formulations were prepared by a solvent extraction-evaporation method (water-oil-water), with poly (D,L-lactic-co-glycolic acid) (PLGA) (50 : 50, low-weight, and hydrophilic end) as the polymeric system. After optimization of the process, three formulations (A, B, and C) were prepared with different organic to water ratio of the primary emulsion while maintaining other components and manufacturing parameters constant. Formulations were characterized for surface morphology, porous nature, drug loading, in vitro drug release, and antimicrobial activity. Microspheres containing 20% peptide with porous surfaces and internal structure were prepared in satisfactory yields and in sizes varying from 25 to 50 μm. Gels of 20% Pluronic F127, which were liquid at or below 24.6°C and formed transparent films at body temperature, were used as carriers for the microspheres. Rheological studies showed a gelation temperature of 24.6°C for the 20% Pluronic F127 gel alone. Gelation temperature and viscosity of formulations A, B, and C as a function of temperature were very close to those of the carrier. A Franz diffusion cell system was used to study the release of peptide from the microspheres suspended in both, phosphate-buffered saline (PBS) and a 20% Pluronic F127 gel. In vitro release of greater than 50% peptide was found in all formulations in both PBS and the gel, and in one formulation there was a release of 75% in both PBS and the gel. Fractions collected from the release process were also tested for bactericidal activity against Staphylococcus epidermidis using the broth microdilution method and found to provide effective antimicrobial activity to warrant consideration and testing in animal wound models for treating combat-related injuries.

Electrospun chitosan microspheres for complete encapsulation of anionic proteins: controlling particle size and encapsulation efficiency

Electrospinning was employed to fabricate chitosan microspheres by a single-step encapsulation of proteins without organic solvents. Chitosan in acetic acid was electrospun toward a grounded sodium carbonate solution at various electric potential and feeding rates. Electrospun microspheres became insoluble and solidified in the sodium carbonate solution by neutralization of chitosan acetate. When the freeze-dried microspheres were examined by scanning electron microscopy, the small particle size was obtained at higher voltages. This is explained by the chitosan droplet size at the electrospinning needle was clearly controllable by the electric potential. The recovery yield of chitosan microspheres was dependent on the concentration of chitosan solution due to the viscosity is the major factor affecting formation of chitosan droplet during curling of the electrospinning jets. For protein encapsulation, fluorescently labeled bovine serum albumin (BSA) was codissolved with chitosan in the solution and electrospun. At higher concentration of sodium carbonate solution and longer solidification time in the solution, the encapsulation efficiency of the protein was confirmed to be significantly high. The high encapsulation efficiency was achievable by instant solidification of microspheres and electrostatic interactions between chitosan and BSA. Release profiles of BSA from the microspheres showed that the protein release was faster in acidic solution due to dissolution of chitosan. Reversed-phase chromatography of the released fractions confirmed that exposure of BSA to acidic solution during the electrospinning did not result in structural changes of the encapsulated protein.

Use of lectin-functionalized particles for oral immunotherapy

Immunotherapy, in recent times, has found its application in a variety of immunologically mediated diseases. Oral immunotherapy may not only increase patient compliance but may, in particular, also induce both systemic as well as mucosal immune responses, due to mucosal application of active agents. To improve the bioavailability and to trigger strong immunological responses, recent research projects focused on the encapsulation of drugs and antigens into polymer particles. These particles protect the loaded antigen from the harsh conditions in the GI tract. Furthermore, modification of the surface of particles by the use of lectins, such as Aleuria aurantia lectin, wheatgerm agglutinin or Ulex europaeus-I, enhances the binding to epithelial cells, in particular to membranous cells, of the mucosa-associated lymphoid tissue. Membranous cell-specific targeting leads to an improved transepithelial transport of the particle carriers. Thus, enhanced uptake and presentation of the encapsulated antigen by antigen-presenting cells favor strong systemic, but also local, mucosal immune responses.

Encapsulation of Liposomes within pH Responsive Microspheres for Oral Colonic Drug Delivery

A novel liposome-in-microsphere (LIM) formulation has been created comprising drug-loaded liposomes within pH responsive Eudragit S100 microspheres. The liposomes contained the model drug 5-ASA and were coated with chitosan in order to protect them during encapsulation within the microspheres and to improve site-specific release characteristics. In vitro drug release studies showed that LIMs prevented drug release within simulated stomach and small intestine conditions with subsequent drug release occurring in large intestine conditions. The formulation therefore has potential for oral colonic drug delivery.