Electrospun acid-neutralizing fibers for the amelioration of inflammatory response

Fluorinated poly(aryl ether)/polypropylene composite patch for prevention of abdominal adhesions after hernia repairs

Hernia typically does not heal spontaneously. Large-pore patches, most notably polypropylene patches (PP patches), are the gold standard in hernia repair surgery. However, a single patch is insufficient for both anti-adhesion and tissue fusion, leading to complications such as organ adhesions. In this study, a chemically stable and biocompatible modified fluorinated poly(aryl ether) (FPAE-F) was prepared by grafting perfluoroalkyl groups onto a fluorinated poly(aryl ether) via nucleophilic aromatic substitution. A porous FPAE-F fiber film (eFPAE-F) was fabricated by electrospinning and combined with a PP patch to produce a modified fluorinated poly(aryl ether)/polypropylene (FPAE-F/PP) composite patch. The eFPAE-F layer of the composite patch, which faces the abdominal viscera, exhibits a water contact angle of 151.3 ± 1.2°. This superhydrophobic surface prevents protein adhesion, thereby inhibiting rapid fibroblast proliferation. The small pore size (3.22 ± 1.25 μm) of the eFPAE-F layer effectively impedes fibroblast infiltration while permitting the transport and metabolism of nutrients. In vivo experiments have demonstrated that the composite patch is a viable anti-adhesion material, resulting in no adhesions and low inflammation levels after 2 weeks. Due to its outstanding anti-adhesion properties, eFPAE-F/PP is expected to be applied in the field of hernia repair.

Layered Double Hydroxide Reshapes the Immune Microenvironment of Rheumatoid Arthritis through Small Mothers against Decapentaplegic 5

Persistent synovitis is a pivotal pathological feature of rheumatoid arthritis (RA). However, the current rheumatoid drugs are accompanied by severe side effects and have limited anti-inflammatory capabilities. In this work, we designed a bioactive material-folic acid modified layered double hydroxides (FA-LDH), aiming at targeting M1 macrophages and modulating macrophage repolarization. The in vitro experiment showed that FA-LDH mitigated the release of proinflammatory cytokines and promoted the expression of M2 macrophage markers. In terms of the action mechanism, FA-LDH modulated the nucleocytoplasmic transport of the small mothers against decapentaplegic 5 (Smad5) protein by adjusting the pH within the immune microenvironment. Subsequently, relying on the interaction between phospho-Smad5 (pSmad5) and p65, the nuclear factor kappa B signaling pathway was down-regulated through inhibiting nuclear transport of p65. Additionally, FA-LDH exhibited excellent targeting capability toward M1 macrophages and strong accumulation capacity in inflamed joints. In vivo experiment showed that FA-LDH could relieve swelling of limbs, reduce the infiltration of inflammatory cells, and protect joint cartilage and subchondral bone structure in collagen-induced arthritis mice. In summary, this work introduces a strategy for utilizing bioactive FA-LDH in the treatment of RA, highlighting the potential of FA-LDH to alleviate inflammation and reshape the immune microenvironment through the pSmad5/p65 axis.

Properties of Electrospun Fibers That Influence Foreign Body Response Modulation

Improving the utility of biomedical devices implanted in subcutaneous tissue by modulating the innate immune response common to these implants is of great interest to improve their utility. Uncontrolled, most biomedical devices produce an immune reaction known broadly as the foreign body response (FBR), which ultimately isolates the device from the native tissue. The use of electrospun fibers to create a porous surface that promotes tissue in-growth and regeneration represents a new paradigm in FBR modulation. A vast number of parameters can be adjusted in the electrospinning process to tune the type and quality of the resulting electrospun matrix, which in turn has varying outcomes with respect to the FBR. In this review, the fabrication and utility of electrospun fiber scaffolds for mitigating the FBR are described, with details of how fiber properties and surface modifications alter immune response for specific biomedical applications.

Recent advances in coaxial electrospun nanofibers for wound healing

The skin is the body's primary immune barrier, defending it against pathogenic invasion. Skin injuries impose a significant physiological burden on patients, making effective wound management essential. Dressings are commonly employed in wound care, and electrospun nanofiber dressings are a research hotspot owing to their ease of fabrication, cost-effectiveness, and structural similarity to the extracellular matrix. Coaxial electrospinning offers considerable advantages in drug delivery, fiber structure transformation, and enhanced interaction with the host. These attributes make coaxial electrospun materials promising candidates for precision and personalized wound dressings in medical treatments. This review provides a comprehensive overview of wound healing and its influencing factors. It also outlines coaxial electrospinning's production principles and benefits in wound dressings. Guided by the factors affecting wound healing, coaxial electrospun nanofiber dressings have different application modalities. Furthermore, we discuss the current limitations and future directions for enhancing the current coaxial electrospun dressing technologies.

Experimental Study of Products Based on Biocompatible Polymer Material from Methacrylic Oligomers as a Potential Barrier for Preventing Adhesions in Cardiac Surgery

The effectiveness and safety of two types of samples based on a biocompatible polymer material made of methacrylic oligomers (Reperen) as a potential antiadhesion pericardial barrier were evaluated in in vitro and in vivo experiments. Two kinds of samples, reinforced with a polyamide mesh and without reinforcement, were used. In in vitro experiments, no adhesion and aggregation of human fibroblasts to the test samples were detected. In in vivo experiments, the samples implanted to rats into the thigh muscles were easily separated from the surrounding tissues 1, 2, and 3 weeks after implantation, being weakly fixed only in the area of the edges. Histological examination at week 2 after implantation revealed no differences between the experimental and control groups. At week 1 and 3, fibrosis and inflammation were more pronounced in animals of the control group (with simulated implantation). The properties demonstrated by both samples of Reperen barriers (with and without polyamide mesh reinforcement) in vivo and in vitro allow considering them as a potential antiadhesion pericardial barrier for clinical use.

Dual-Mode Release of IL-4 and TCP from a PGA-SF Core-Shell Electrospinning Scaffold for Enhanced Bone Regeneration through Synergistic Immunoregulation and Osteogenesis

The successful filling of bone defects remains challenging due to the incongruity between bone graft materials and the dynamic process of bone healing. Developing multifunctional materials matching the dynamic process of bone healing offers a viable solution to the current dilemma. Lines of evidence have shown that engineering osteoimmunomodulatory biomaterials can modulate the function of immune cells and thus promote bone regeneration. Herein, we utilized silk fibroin (SF) and polyglycolic acid (PGA) to create a PGA-SF core-shell fibrous scaffold, incorporating interleukin-4 (IL-4) and tricalcium phosphate (TCP) as a codelivery system (PGA/TCP-SF/IL-4), aiming to achieve an initial rapid release of IL-4 and sustained release of TCP. The PGA/TCP-SF/IL-4 scaffold mimicked the native bone structure and showed superior tenacity in the wetting regime. In vitro studies demonstrated that the PGA/TCP-SF/IL-4 scaffold significantly reduced the inflammatory response by upregulating the M2 macrophages, created a favorable microenvironment for osteogenesis, and facilitated osteogenic differentiation and mineralization. Implantation of the PGA/TCP-SF/IL-4 scaffold into the rat skull defect model notably increased the formation of new bones. IL-4 and TCP acted synergistically in attenuating inflammation and enhancing osteogenic differentiation. Overall, this multifunctional scaffold comprehensively considers the various demands in the bone defect region, which might have a significant potential for application in bone reconstruction.

Mechanical loading on cell-free polymer composite scaffold enhances in situ regeneration of fully functional Achilles tendon in a rabbit model

Traditional tendon engineering using cell-loaded scaffold has limited application potential due to the need of autologous cells. We hypothesize that potent mechanical loading can efficiently induce in situ Achilles tendon regeneration in a rabbit model by using a cell-free porous composite scaffold. In this study, melt-spinning was used to fabricate PGA (polyglycolic acid) and PLA (polylactic acid) filament fibers as well as non-woven PGA fibers. The PLA/PGA (4:2) filament fibers were further braided into a hybrid yarn，which was knitted into a PLA/PGA tubular mesh with potent mechanical property for sustaining natural tendon strain. The results showed that a complete cross-section of Achilles tendon created a model of full mechanical loading on the bridging scaffold, which could efficiently induce in situ tendon regeneration by promoting host cell infiltration, matrix production and tissue remodeling. Histologically, mechanical loading assisted in forming parallel aligned collagen fibers and tenocytes in a fashion similar to those of native tendon. Transmission electron microscope further demonstrated that mechanical strain induced collagen fibril development by increasing fibril diameter and forming bipolar structure, which resulted in enhanced mechanical properties. Interestingly, the synergistic effect between mechanical loading and hyaluronic acid modification was also observed on the induced tenogenic differentiation of infiltrated host fibroblasts. In conclusion, potent mechanical loading is the key inductive microenvironment for in situ tendon regeneration for this polymer-based composite scaffold with proper matrix modification, which may serve as a universal scaffold product for tendon regeneration.

Preparation of silk fibroin-derived hydrogels and applications in skin regeneration

Purpose

To compare different methods of preparing silk fibroin hydrogels, then summarize the applications of silk fibroin hydrogel-based scaffolds in skin regeneration and finally discuss about future prospects to inspire people interested in this field.

Methods

A narrative review of the relevant papers was conducted. Notably, for applications in skin regeneration, this review provides a categorized summary and discussion of studies from the past decade.

Results

Silk fibroin is a naturally occurring, biocompatible biomaterial that is easily producible. Thanks to its exceptional processability, silk fibroin has found diverse applications in skin regeneration. These applications encompass sponges, fiber fabrics, thin films, and hydrogels. Hydrogels, in particular, are noteworthy due to their water-containing network structure, closely resembling natural tissues. They provide a biomimetic three-dimensional growth environment for cells and have the capacity to incorporate growth factors. Consequently, there are abundant studies of silk fibroin hydrogel-based scaffolds in skin regeneration. Besides, some commercialized medical devices are also made of silk fibroin.

Conclusion

Silk fibroin hydrogel could be prepared with multiple methods and it is widely used in constructing scaffolds for efficient skin regeneration. In the future, silk fibroin hydrogel-based skin scaffolds could be more biomimetic and smart.

An Adaptable Drug Delivery System Facilitates Peripheral Nerve Repair by Remodeling the Microenvironment

The multifaceted process of nerve regeneration following damage remains a significant clinical issue, due to the lack of a favorable regenerative microenvironment and insufficient endogenous biochemical signaling. However, the current nerve grafts have limitations in functionality, as they require a greater capacity to effectively regulate the intricate microenvironment associated with nerve regeneration. In this regard, we proposed the construction of a functional artificial scaffold based on a "two-pronged" approach. The whole system was developed by encapsulating Tazarotene within nanomicelles formed through self-assembly of reactive oxygen species (ROS)-responsive amphiphilic triblock copolymer, all of which were further loaded into a thermosensitive injectable hydrogel. Notably, the hydrogel exhibits obvious temperature sensitivity at a concentration of 6 wt %, and the nanoparticles possess concentration-dependent H2O2-response capability with a controlled release profile in 48 h. The combined strategy promoted the repair of injured peripheral nerves, attributed to the dual role of the materials, which mainly involved providing structural support, modulating the immune microenvironment, and enhancing angiogenesis. Overall, this study opens up intriguing prospects in tissue engineering.

Type I collagen and fibromodulin enhance the tenogenic phenotype of hASCs and their potential for tendon regeneration

Our previous work demonstrated the tendon-derived extracellular matrix (ECM) extracts as vital niches to specifically direct mesenchymal stem cells towards tenogenic differentiation. This study aims to further define the effective ECM molecules capable of teno-lineage induction on human adipose-derived stem cells (hASCs) and test their function for tendon engineering. By detecting the teno-markers expression levels in hASCs exposed to various substrate coatings, collagen I (COL1) and fibromodulin (FMOD) were identified to be the key molecules as a combination and further employed to the modification of poly(L-lactide-co-ε-caprolactone) electrospun nanoyarns, which showed advantages in inducting seeded hASCs for teno-lineage specific differentiation. Under dynamic mechanical loading, modified scaffold seeded with hASCs formed neo-tendon in vitro at the histological level and formed better tendon tissue in vivo with mature histology and enhanced mechanical properties. Primary mechanistic investigation with RNA sequencing demonstrated that the inductive mechanism of these two molecules for hASCs tenogenic differentiation was directly correlated with positive regulation of peptidase activity, regulation of cell-substrate adhesion and regulation of cytoskeletal organization. These biological processes were potentially affected by LOC101929398/has-miR-197-3p/TENM4 ceRNA regulation axis. In summary, COL1 and FMOD in combination are the major bioactive molecules in tendon ECM for likely directing tenogenic phenotype of hASCs and certainly valuable for hASCs-based tendon engineering.

Surface Functional Modification by Ti3 C2 Tx MXene on PLLA Nanofibers for Optimizing Neural Stem Cell Engineering

Optimizing cell substrates by surface modification of neural stem cells (NSCs), for efficient and oriented neurogenesis, represents a promising strategy for treating neurological diseases. However, developing substrates with the advanced surface functionality, conductivity, and biocompatibility required for practical application is still challenging. Here, Ti3 C2 Tx MXene is introduced as a coating nanomaterial for aligned poly(l-lactide) (PLLA) nanofibers (M-ANF) to enhance NSC neurogenesis and simultaneously tailor the cell growth direction. Ti3 C2 Tx MXene treatment provides a superior conductivity substrate with a surface rich in functional groups, hydrophilicity, and roughness, which can provide biochemical and physical cues to support NSC adhesion and proliferation. Moreover, Ti3 C2 Tx MXene coating significantly promotes NSC differentiation into both neurons and astrocytes. Interestingly, Ti3 C2 Tx MXene acts synergistically with the alignment of nanofibers to promote the growth of neurites, indicating enhanced maturation of these neurons. RNA sequencing analysis further reveals the molecular mechanism by which Ti3 C2 Tx MXene modulates the fate of NSCs. Notably, surface modification by Ti3 C2 Tx MXene mitigates the in vivo foreign body response to implanted PLLA nanofibers. This study confirms that Ti3 C2 Tx MXene provides multiple advantages for decorating the aligned PLLA nanofibers to cooperatively improve neural regeneration.

Aligned Electroactive Electrospun Fibrous Scaffolds for Peripheral Nerve Regeneration

Effective repair and functional recovery of large peripheral nerve deficits are urgent clinical needs. A biofunctional electroactive scaffold typically acts as a "bridge" for the repair of large nerve defects. In this study, we constructed a biomimetic piezoelectric and conductive aligned polypyrrole (PPy)/polydopamine (PDA)/poly-l-lactic acid (PLLA) electrospun fibrous scaffold to improve the hydrophilicity and cellular compatibility of PLLA and restore the weakened piezoelectric effect of PDA, which is beneficial in promoting Schwann cell differentiation and dorsal root ganglion neuronal extension and alignment. The aligned PPy/PDA/PLLA fibrous scaffold bridged the sciatic nerve of Sprague-Dawley rats with a 10 mm deficit, prevented autotomy, and promoted nerve regeneration and functional recovery, thereby activating the calcium and AMP-activated protein kinase signaling pathways. Therefore, electroactive fibrous scaffolds exhibit great potential for neural tissue regeneration.

Transcriptome Analysis of Human Vascular Smooth Muscle Cells Cultured on a Polyglycolic Acid Mesh Scaffold

To construct tissue-engineered blood vessels (TEBVs) in vitro, it is necessary to transfer seed cells to three-dimensional (3D) scaffolds for culture. However, what happens to the behavior of the cells after they are transferred to the scaffold is unclear. Therefore, in this study, a transcriptome analysis was used to characterize the differentially expressed genes (DEGs) of vascular smooth muscle cells (VSMCs) before and after transfer to 3D polyglycolic acid (PGA) scaffolds and to understand the changes in functional gene expression in the early stage of 3D culture. Transcriptome sequencing results showed that DEGs in the seed cells were mainly enriched in cell proliferation and cell-cell adhesion. The DEGs of cells grown in a 3D PGA scaffold (PGA-VSMCs) were mainly enriched in signal transduction. Furthermore, we found that ERK1/2 was significantly activated in PGA-VSMCs and inhibiting the phosphorylation level of ERK 1/2 in PGA-VSMCs significantly increased the expression of elastin. In conclusion, the PGA scaffold material altered gene expression in VSMCs and affected the elastin production. This study advances our understanding of biomaterial-cell interactions and provides valuable insights for improving the cultivation of TEBVs.

Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review

This article provides a thorough overview of the available resorbable biomaterials appropriate for producing replacements for damaged tissues. In addition, their various properties and application possibilities are discussed as well. Biomaterials are fundamental components in tissue engineering (TE) of scaffolds and play a critical role. They need to exhibit biocompatibility, bioactivity, biodegradability, and non-toxicity, to ensure their ability to function effectively with an appropriate host response. With ongoing research and advancements in biomaterials for medical implants, the objective of this review is to explore recently developed implantable scaffold materials for various tissues. The categorization of biomaterials in this paper includes fossil-based materials (e.g., PCL, PVA, PU, PEG, and PPF), natural or bio-based materials (e.g., HA, PLA, PHB, PHBV, chitosan, fibrin, collagen, starch, and hydrogels), and hybrid biomaterials (e.g., PCL/PLA, PCL/PEG, PLA/PEG, PLA/PHB PCL/collagen, PCL/chitosan, PCL/starch, and PLA/bioceramics). The application of these biomaterials in both hard and soft TE is considered, with a particular focus on their physicochemical, mechanical, and biological properties. Furthermore, the interactions between scaffolds and the host immune system in the context of scaffold-driven tissue regeneration are discussed. Additionally, the article briefly mentions the concept of in situ TE, which leverages the self-renewal capacities of affected tissues and highlights the crucial role played by biopolymer-based scaffolds in this strategy.

The Immunosuppressive Niche Established with a Curcumin-Loaded Electrospun Nanofibrous Membrane Promotes Cartilage Regeneration in Immunocompetent Animals

Inflammatory cells mount an immune response against in vitro engineered cartilage implanted into immunocompetent animals, consequently limiting the usage of tissue-engineered cartilage to repair cartilage defects. In this study, curcumin (Cur)-an anti-inflammatory agent-was mixed with poly(lactic-co-glycolic acid) (PLGA) to develop a Cur/PLGA nanofibrous membrane with nanoscale pore size and anti-inflammatory properties. Fourier-transform infrared spectroscopy and high-performance liquid chromatography analyses confirmed the successful loading of Cur into the Cur/PLGA nanofibrous membrane. The results of the in vitro assay demonstrated the sustained release kinetics and enhanced stability of Cur in the Cur/PLGA nanofibrous membrane. Western blotting and enzyme-linked immunosorbent assay analyses revealed that the Cur/PLGA nanofibrous membrane significantly downregulated the expression of inflammatory cytokines (IL-1β, IL-6, and TNF-α). A chondrocyte suspension was seeded into a porous PLGA scaffold, and the loaded scaffold was cultured for 3 weeks in vitro to engineer cartilage tissues. The cartilage was packed with the in vitro engineered Cur/PLGA nanofibrous membrane and subcutaneously implanted into rats to generate an immunosuppressive niche. Compared with those in the PLGA-implanted and pure cartilage (without nanofibrous membrane package)-implanted groups, the cartilage was well preserved and the inflammatory response was suppressed in the Cur/PLGA-implanted group at weeks 2 and 4 post-implantation. Thus, this study demonstrated that packaging the cartilage with the Cur/PLGA nanofibrous membrane effectively generated an immunosuppressive niche to protect the cartilage against inflammatory invasion. These findings enable the clinical translation of tissue-engineered cartilage to repair cartilage defects.

Formation of low-density electrospun fibrous network integrated mesenchymal stem cell sheet

Cell sheets combined with electrospun fibrous mats represent an attractive approach for the repair and regeneration of injured tissues. However, the conventional dense electrospun mats as supportive substrates in forming "cell sheet on fiber mat" complexes suffer from problems of limiting the cellular function and eliciting a host response upon implantation. To give full play to the role of electrospun biomimicking fibers in forming quality cell sheets, this study proposed to develop a cell-fiber integrated sheet (CFIS) featuring a spatially homogeneous distribution of cells within the fiber structure by using a low-density fibrous network for cell sheet formation. A low-density electrospun polycaprolactone (PCL) fibrous network at a density of 103.8 ± 16.3 μg cm^-2 was produced by controlling the fiber deposition for a short period of 1 min and subsequently transferred onto polydimethylsiloxane rings for facilitating cell sheet formation, in which rat bone marrow-derived mesenchymal cells were used. Using a dense electrospun PCL fibrous mat (481.5 ± 7.5 μg cm^-2) as the control, it was found that cells on the low-density fibrous network (L-G) exhibited improved capacities in spreading, proliferation, stemness maintenance and matrix-remodeling during the process of CFIS formation. Structurally, the CFIS constructs revealed strong integration between the cells and the fibrous network, thus providing excellent cohesion and physical integrity to enable strengthening of the formed cell sheet. By contrast, the cell sheet formed on the dense fibrous mat (D-G) showed a two-layer (biphasic) structure due to the limitation of cellular invasion. Moreover, such engineered CFIS was identified with enhanced immunomodulatory effects by promoting LPS-stimulated macrophages towards an M2 phenotype in vitro. Our results suggest that the CFIS may be used as a native tissue equivalent "cell sheet" for improving the efficacy of the tissue engineering approach for the repair and regeneration of impaired tissues.

Icariin-loaded hydrogel with concurrent chondrogenesis and anti-inflammatory properties for promoting cartilage regeneration in a large animal model

Currently, an effective repair method that can promote satisfactory cartilage regeneration is unavailable for cartilage damages owing to inevitable inflammatory erosion. Cartilage tissue engineering has revealed considerable treatment options for cartilage damages. Icariin (ICA) is a flavonoid component of Epimedii folium with both chondrogenic and anti-inflammatory properties. In this study, we prepared an ICA/CTS hydrogel by loading ICA into chitosan (CTS) hydrogel to impart chondrogenesis and anti-inflammatory properties to the ICA/CTS hydrogel. In vitro results revealed that ICA showed sustained release kinetics from the ICA/CTS hydrogel. In addition, compared to the CTS hydrogel, the ICA/CTS hydrogel exhibited a favorable in vitro anti-inflammatory effect upon incubation with lipopolysaccharide pre-induced RAW264.7 macrophages, as indicated by the suppression of inflammatory-related cytokines (IL-6 and TNF-α). Additionally, when co-cultured with chondrocytes in vitro, the ICA/CTS hydrogel showed good cytocompatibility, accelerated chondrocyte proliferation, and enhanced chondrogenesis compared to the CTS hydrogel. Moreover, the in vitro engineered cartilage from the chondrocyte-loaded ICA/CTS hydrogel achieved stable cartilage regeneration when subcutaneously implanted in a goat model. Finally, the addition of ICA endowed the ICA/CTS hydrogel with a potent anti-inflammatory effect compared to what was observed in the CTS hydrogel, as confirmed by the attenuated IL-1β, IL-6, TNF-α, and TUNEL expression. The prepared ICA/CTS hydrogel offered an effective method of delivery for chondrogenic and anti-inflammatory agents and served as a useful platform for cartilage regeneration in an immunocompetent large animal model.

Synergistic effects of mechanical stimulation and crimped topography to stimulate natural collagen development for tendon engineering

Suitable scaffold structures and mechanical loading are essential for functional tendon engineering. However, the bipolar fibril structure of native tendon collagen is yet to be recaptured in engineered tendons. This study compared the development of Achilles tendons of postnatal rats with and without (via surgical section) mechanical loading to define the mechanism of mechanical stimulation-mediated tendon development. The results demonstrated that the severed tendons weakened mechanically and exhibited disorganization without a bipolar fibril superstructure. Proteomic analysis revealed differentially expressed key regulatory molecules related to the collagen assembly process, including decreased fibromodulin, keratocan, fibroblast growth factor-1, and increased lumican and collagen5a1 in the severed tendons with immunohistochemical verification. Additionally, a complex regulatory network of mechanical stimulation-mediated collagen assembly in a spatiotemporal manner was also revealed using bioinformatics analysis, wherein PI3K-Akt and HDAC4 may be the predominant signaling pathways. A wavy microgrooved surface (Y = 5.47sin(0.015x)) that biomimics tendon topography was observed to enhance the expression of collagen assembly molecules under mechanical loading, and the aforementioned pathways are particularly involved and verified with their respective inhibitors of LY-294002 and LMK-235. Furthermore, an electrospun crimped nanofiber scaffold (approximately 2 μm fiber diameter and 0.12 crimpness) was fabricated to biomimic the tenogenic niche environment; this was observed to be more effective on enhancing collagen production and assembly under mechanical stimulation. In conclusion, the synergistic effect between topographical niche and mechanical stimulation was observed to be essential for collagen assembly and maturation and should be applied to functional tendon engineering in the future. STATEMENT OF SIGNIFICANCE: In biomaterial-mediated tendon regeneration, mechanical stimulation is essential for tendon collagen assembly. However, the underlying mechanisms remain not fully defined, leading to the failure of the native-like collagen regeneration. In this study, a mechanical stimulation deprivation model of rat tendon was established to reveal the mechanisms in tendon development and define the key regulatory molecules including small leucine-rich proteoglycans, lysyl oxidase and collagen V. After ensuring the importance of biomimetic structure in tendon remodeling, crimped nanofibers were developed to verify these regulatory molecules, and demonstrated that mechanical stimulation significantly enhanced collagen assembly via PIK3 and HDAC4 pathways in biomaterial-regulated tendon regeneration. This study provides more insightful perspectives in the physiologically remodeling progression of tendon collagen and design of tendon scaffolds.

Optimizing the chitosan-PCL based membranes with random/aligned fiber structure for controlled ciprofloxacin delivery and wound healing

The aim of this study was to optimize the chitosan/polycaprolactone (CS/PCL) electrospun nanofibrous membrane with random/aligned fiber structures to provide a controlled release of ciprofloxacin (Cip) and guide skin fibroblasts arrangement. A series of Cip-encapsulated CS/PCL electrospun membranes were prepared by coaxial-electrospinning. The existence of Cip in core-shell structured fibers was confirmed by using SEM, TEM and FTIR characterizations. The in vitro drug-release profiles suggested that the Cip presented a sustained release for 15 days. Simultaneously, cyto-compatibility of the membranes decreased with the increasing amount of Cip from 2.0% to 5.0%. In particular, aligned CS/PCL membrane loading with 2.0% Cip exhibited a good balanced ability between cell proliferation and antibacterial effect (>99% against Escherichiacoli and Staphylococcus aureus), which significantly accelerated the wound healing process in vivo. These results suggested that the aligned CS/PCL membrane loading with 2.0% Cip exhibited great antibacterial property and biocompatibility, which possess promising applications potential for wound healing.

Scaffold-Mediated Immunoengineering as Innovative Strategy for Tendon Regeneration

Tendon injuries are at the frontier of innovative approaches to public health concerns and sectoral policy objectives. Indeed, these injuries remain difficult to manage due to tendon’s poor healing ability ascribable to a hypo-cellularity and low vascularity, leading to the formation of a fibrotic tissue affecting its functionality. Tissue engineering represents a promising solution for the regeneration of damaged tendons with the aim to stimulate tissue regeneration or to produce functional implantable biomaterials. However, any technological advancement must take into consideration the role of the immune system in tissue regeneration and the potential of biomaterial scaffolds to control the immune signaling, creating a pro-regenerative environment. In this context, immunoengineering has emerged as a new discipline, developing innovative strategies for tendon injuries. It aims at designing scaffolds, in combination with engineered bioactive molecules and/or stem cells, able to modulate the interaction between the transplanted biomaterial-scaffold and the host tissue allowing a pro-regenerative immune response, therefore hindering fibrosis occurrence at the injury site and guiding tendon regeneration. Thus, this review is aimed at giving an overview on the role exerted from different tissue engineering actors in leading immunoregeneration by crosstalking with stem and immune cells to generate new paradigms in designing regenerative medicine approaches for tendon injuries.

Gelatin/Polycaprolactone Electrospun Nanofibrous Membranes: The Effect of Composition and Physicochemical Properties on Postoperative Cardiac Adhesion

Cardiovascular diseases have become a major threat to human health. The adhesion formation is an inevitable pathophysiological event after cardiac surgery. We have previously shown that gelatin/polycaprolactone (GT/PCL, mass ratio 50:50) electrospun nanofibrous membranes have high potential in preventing postoperative cardiac adhesion, but the effect of GT:PCL composition on anti-adhesion efficacy was not investigated. Herein, nanofibrous membranes with different GT:PCL mass ratios of 0:100, 30:70, 50:50, and 70:30 were prepared via electrospinning. The 70:30 membrane failed to prevent postoperative cardiac adhesion, overly high GT contents significantly deteriorated the mechanical properties, which complicated the suturing during surgery and hardly maintained the structural integrity after implantation. Unexpectedly, the 0:100 membrane (no gelatin contained) could not effectively prevent either, since its large pore size allowed the penetration of numerous inflammatory cells to elicit a severe inflammatory response. Only the GT:PCL 50:50 membrane exhibited excellent mechanical properties, good biocompatibility and effective anti-cell penetration ability, which could serve as a physical barrier to prevent postoperative cardiac adhesion and might be suitable for other biomedical applications such as wound healing, guided tissue or bone regeneration.

Oriented nanofibrous P(MMD-co-LA)/Deferoxamine nerve scaffold facilitates peripheral nerve regeneration by regulating macrophage phenotype and revascularization

Delayed injured nerve regeneration remains a clinical problem, partly ascribing to the lack of regulation of regenerative microenvironment, topographical cues, and blood nourishment. Functional electrospun conduits have been established as an efficacious strategy to facilitate nerve regeneration by providing structural guidance, regulating the regenerative immune microenvironment, and improving vascular regeneration. However, the synthetic polymers conventionally used to fabricate electrospinning scaffolds, such as poly(L-lactic acid), poly(glycolic acid), and poly(lactic-co-glycolic acid), can cause aseptic inflammation due to acidic degradation products. Therefore, a poly[3(S)-methyl-morpholine-2,5-dione-co-lactic] [P(MMD-co-LA)] containing alanine units with good mechanical properties and reduced acid degradation products, was obtained by melt ring-opening polymerization (ROP). Here, we aimed to explore the effect of oriented nanofiber/Deferoxamine (DFO, a hydrophilic angiogenic drug) scaffold in the rapid construction of a favorable regenerative microenvironment, including cell bridge, polarized vascular system, and immune microenvironment. In vitro studies have shown that the scaffold can sustainably release DFO, which accelerates the migration and tube formation of human umbilical vein endothelial cells (HUVECs), as well as the expression of genes related to angiogenesis. The physical clues provided by the arranged nanofibers can regulate the polarization of macrophages and reduce the expression of inflammatory factors. Furthermore, the in vivo results demonstrated a higher M2 polarization level of the oriented nanofibrous scaffold treatment group with reducedinflammation reaction in the injured nerve. Moreover, the in-situ release of DFO up-regulated the expression of HIF1-α and SDF-1α genes, as well as the expression of HIF1-α's target gene VEGF, further promoting revascularization and enhancing nerve regeneration at the defect site. The obtained results provide essential insights on accelerating the creation of the nerve regeneration microenvironment by combining the physiological processes of nerve regeneration with topographical cues and chemical signal induction.

The balanced microenvironment regulated by the degradants of appropriate PLGA scaffolds and chitosan conduit promotes peripheral nerve regeneration

Tissue-engineered nerve grafts (TENGs) are the most promising way for repairing long-distance peripheral nerve defects. Chitosan and poly (lactic-co-glycolic acid) (PLGA) scaffolds are considered as the promising materials in the pharmaceutical and biomedical fields especially in the field of tissue engineering. To further clarify the effects of a chitosan conduit inserted with various quantity of poly (lactic-co-glycolic acid) (PLGA) scaffolds, and their degrades on the peripheral nerve regeneration, the chitosan nerve conduit inserted with different amounts of PLGA scaffolds were used to repair rat sciatic nerve defects. The peripheral nerve regeneration at the different time points was dynamically and comprehensively evaluated. Moreover, the influence of different amounts of PLGA scaffolds on the regeneration microenvironment including inflammatory response and cell state were also revealed. The modest abundance of PLGA is more instrumental to the success of nerve regeneration, which is demonstrated in terms of the structure of the regenerated nerve, reinnervation of the target muscle, nerve impulse conduction, and overall function. The PLGA scaffolds aid the migration and maturation of Schwann cells. Furthermore, the PLGA and chitosan degradation products in a correct ratio neutralize, reducing the inflammatory response and enhancing the regeneration microenvironment. The balanced microenvironment regulated by the degradants of appropriate PLGA scaffolds and chitosan conduit promotes peripheral nerve regeneration. The findings represent a further step towards programming TENGs construction, applying polyester materials in regenerative medicine, and understanding the neural regeneration microenvironment.

•

Guide scaffolds are necessary for construction of TENGs to benefeat Schwann cell migration and maturation.

•

A large number of acid degradation products of PLGA scaffolds adversely affect cell proliferation, migration and apoptosis.

•

Appropriate amount of PLGA scaffolds balance positive cell guidance and negative degradation inflammation.

•

Dosage of PLGA and its combination with complementary biomaterials are key factors that affect regeneration effects.

Recent advances in polymer scaffolds for biomedical applications

The review provides insights into current advancements in electrospinning-assisted manufacturing for optimally designing biomedical devices for their prospective applications in tissue engineering, wound healing, drug delivery, sensing, and enzyme immobilization, and others. Further, the evolution of electrospinning-based hybrid biomedical devices using a combined approach of 3 D printing and/or film casting/molding, to design dimensionally stable membranes/micro-nanofibrous assemblies/patches/porous surfaces, etc. is reported. The influence of various electrospinning parameters, polymeric material, testing environment, and other allied factors on the morphological and physico-mechanical properties of electrospun (nano-/micro-fibrous) mats (EMs) and fibrous assemblies have been compiled and critically discussed. The spectrum of operational research and statistical approaches that are now being adopted for efficient optimization of electrospinning process parameters so as to obtain the desired response (physical and structural attributes) has prospectively been looked into. Further, the present review summarizes some current limitations and future perspectives for modeling architecturally novel hybrid 3 D/selectively textured structural assemblies, such as biocompatible, non-toxic, and bioresorbable mats/scaffolds/membranes/patches with apt mechanical stability, as biological substrates for various regenerative and non-regenerative therapeutic devices.

A biomimetic triple-layered biocomposite with effective multifunction for dura repair

Dura mater defect and subsequent cerebrospinal fluid (CSF) leakage usually appear in trauma or neurosurgical procedures and are followed by a series of serious complications and even death. The use of a qualified dura mater substitute with multifunction of leakage blockade, adhesion prevention, and dura reconstruction is one of the promising treatment methods. However, even though some products have been used in the clinic, none of the substitutes achieved the required multifunction. In this study, we aimed to design and fabricate a dura repair composite with the ideal multifunction. By biomimicking the structure and component of natural dura, we applied poly(L-lactic acid) (PLLA), chitosan (CS), gelatin, and acellular small intestinal submucosa (SIS) powders to successfully prepare a triple-layered composite. Then, a series of specific devices and techniques were developed to investigate the performance. The results revealed that satisfactory structural stability could be realized under good synergistic interactions among the components. In addition, all the findings suggested that the bionic triple-layered composite showed satisfactory multifunction of leakage blockade, adhesion prevention, antibacterial property, and dura reconstruction potential, and thus, it might be a promising candidate for dura repair. STATEMENT OF SIGNIFICANCE: Developing qualified dura mater substitutes with multifunction of leakage blockade, adhesion prevention, and dura reconstruction is crucial for treating dura mater defect and subsequent cerebrospinal fluid (CSF) leakage that appear in trauma or neurosurgical procedures. In this study, we designed and fabricated a triple-layered dura repair biocomposite with satisfactory structural stability and desired multifunction based on biomimicking of the structure and component of natural dura. Moreover, a series of specific devices and techniques were developed to investigate the relevant performance. Overall, the developed hydrogel electrospinning system exhibited excellent advantages in achieving multifunction and could be applied widely in the future to achieve multifunctional tissue repair materials.

Robust Electrospun Nanofibers from Chemosynthetic Poly(4-hydroxybutyrate) as Artificial Dural Substitute

Bioresorbable poly(4-hydroxybutyrate) (P4HB) may fulfill the specific requirements that are necessary for a dural substitute, including its high elasticity, long-term strength retention properties, and the biocompatibility without significant accumulation of acidic degradation products. However, commercial P4HB can only be produced by the bacterial fermentation, which limits its applications in the cerebrospinal system due to higher endotoxin restriction. Meanwhile, P4HB can be prepared via the ring-opening polymerization of γ-butyrolactone. In this contribution, high molecular weight P4HB from chemosynthesis is electrospun into fibrous membrane, showing good mechanical properties that match the natural dura mater. Such P4HB membrane induces fast cellular migration, adhesion, and proliferation of fibroblasts in vitro. Subcutaneous implantation in rats demonstrates excellent biocompatibility of the P4HB membrane with proper biodegradation behaviors. After implantation in the rabbit dural defect model as an onlay graft, the P4HB membranes prevent cerebrospinal fluid leakage and regenerate dura tissue without detecting any local or systematic infections or foreign body responses. Thus, the electrospun P4HB membranes may be particularly useful as artificial dural substitutes to induce wound closure and tissue regeneration, which will be of great benefit to neurosurgery in the future.

Engineering a Highly Biomimetic Chitosan-Based Cartilage Scaffold by Using Short Fibers and a Cartilage-Decellularized Matrix

Engineering scaffolds with structurally and biochemically biomimicking cues is essential for the success of tissue-engineered cartilage. Chitosan (CS)-based scaffolds have been widely used for cartilage regeneration due to its chemostructural similarity to the glycosaminoglycans (GAGs) found in the extracellular matrix of cartilage. However, the weak mechanical properties and inadequate chondroinduction capacity of CS give rise to compromised efficacy of cartilage regeneration. In this study, we incorporated short fiber segments, processed from electrospun aligned poly(lactic-co-glycolic acid) (PLGA) fiber arrays, into a citric acid-modified chitosan (CC) hydrogel scaffold for mechanical strengthening and structural biomimicking and meanwhile introduced cartilage-decellularized matrix (CDM) for biochemical signaling to promote the chondroinduction activity. We found that the incorporation of PLGA short fibers and CDM remarkably strengthened the mechanical properties of the CC hydrogel (+349% in compressive strength and +153% in Young's modulus), which also exhibited a large pore size, appropriate porosity, and fast water absorption ability. Biologically, the engineered CDM-Fib/CC scaffold significantly promoted the adhesion and proliferation of chondrocytes and supported the formation of matured cartilage tissue with a cartilagelike structure and deposition of abundant cartilage ECM-specific GAGs and type II collagen (+42% in GAGs content and +295% in type II collagen content). The enhanced mechanical competency and chondroinduction capacity with the engineered CDM-Fib/CC scaffold eventually fulfilled successful in situ osteochondral regeneration in a rabbit model. This study thereby demonstrated a great potential of the engineered highly biomimetic chitosan-based scaffold in cartilage tissue repair and regeneration.

Fish Waste: From Problem to Valuable Resource

Following the growth of the global population and the subsequent rapid increase in urbanization and industrialization, the fisheries and aquaculture production has seen a massive increase driven mainly by the development of fishing technologies. Accordingly, a remarkable increase in the amount of fish waste has been produced around the world; it has been estimated that about two-thirds of the total amount of fish is discarded as waste, creating huge economic and environmental concerns. For this reason, the disposal and recycling of these wastes has become a key issue to be resolved. With the growing attention of the circular economy, the exploitation of underused or discarded marine material can represent a sustainable strategy for the realization of a circular bioeconomy, with the production of materials with high added value. In this study, we underline the enormous role that fish waste can have in the socio-economic sector. This review presents the different compounds with high commercial value obtained by fish byproducts, including collagen, enzymes, and bioactive peptides, and lists their possible applications in different fields.

Thermal treatment at 500 °C significantly reduces the reaction to irregular tricalcium phosphate granules as foreign bodies: An in vivo study

Evaporation of phosphate species during thermal treatment (> 400 °C) of calcium phosphates leads to the formation of an alkaline layer on their surface. The aim of this study was to evaluate the hypothesis that the biological response of thermally treated calcium phosphates is modified by the presence of such an alkaline layer on their surface. For this purpose, 0.125-0.180 mm α- and β-tricalcium phosphate (TCP) granules were obtained by crushing and size classification, with some being subjected to thermal treatment at 500 °C. The four types of granules (α-TCP, β-TCP, α-TCP-500 °C, and β-TCP-500 °C) were implanted subcutaneously and orthotopically in rats. Sham operations served as control. Subcutaneously, α-TCP and β-TCP induced significantly more multinucleated giant cells (MNGCs) than calcined granules. Most of the induced MNGCs were TRAP-negative, CD-68 positive and cathepsin K-negative, reflecting a typical indication of a reaction with a foreign body. The vessel density was significantly higher in the α-TCP and β-TCP groups than it was in the α-TCP-500 °C and β-TCP-500 °C groups. In the femur model, β-TCP-500 °C induced significantly more new bone formation than that induced by β-TCP. The granule size was also significantly larger in the β-TCP-500 °C group, making it more resistant to degradation than β-TCP. The MNGC density was higher in the α-TCP and β-TCP groups than in the α-TCP-500 °C and β-TCP-500 °C groups, including cathepsin-positive, CD-68 positive, TRAP-positive and TRAP-negative MNGCs. In conclusion, this study confirms that the biological response of calcium phosphates was affected by the presence of an alkaline layer on their surface. Thermally-treated α-TCP and β-TCP granules produced significantly fewer MNGCs and were significantly less degraded than non-thermally-treated α-TCP and β-TCP granules. Thermally treating α-TCP and β-TCP granules shifts the reaction from a foreign body reaction towards a physiological reaction by downregulating the number of induced MNGCs and enhancing degradation resistance.

Collagen and chondroitin sulfate functionalized bioinspired fibers for tendon tissue engineering application

Functional tendon tissue engineering depends on harnessing the biochemical and biophysical cues of the native tendon extracellular matrix. In this study, we fabricated highly-aligned poly(L-lactic acid) (PLLA) fibers with surfaces decorated by two of the crucial tendon ECM components, type 1 collagen (COL1) and chondroitin sulfate (CS), through a coaxial stable jet electrospinning approach. Effects of the biomimetic COL1-CS (shell)/PLLA (core) fibers on the tenogenic differentiation of human mesenchymal stem cells (hMSCs) in vitro were investigated. Higher rates of cell spreading and proliferation are observed on the aligned COL1-CS/PLLA fibers compared to that on the plain PLLA fibers. Expression of the tendon-associated genes scleraxis (SCX) and COL1 as well as protein tenomodulin (TNMD) are significantly increased. Introduction of mechanical stimulation gives rise to synergistic effect on tenogenic differentiation of hMSCs. Higher expression of TGF-β2, TGFβR-II, and Smad3 by the cells on the COL1-CS/PLLA fiber substrates are observed, which indicates that COL1-CS/PLLA ultrafine fibers dictate the hMSC tenogenic differentiation through activating the TGF-β signaling pathway. Animal study in rat Achilles tendon repair model corroborated the promoting role of COL1-CS/PLLA in regenerating a tendon-like tissue. Thus, our highly aligned biomimicking fibers may serve as an efficient scaffolding system for functional tendon regeneration.

In vitro performance of 3D printed PCL-TCP degradable spinal fusion cage

Spinal fusion cages are commonly used to treat spinal diseases caused by degenerative changes, deformities, and trauma. At present, most of the main clinical spinal fusion cage products are non-degradable and still cause some undesirable side effects, such as the stress shielding phenomenon, interference with postoperative medical imaging, and obvious foreign body sensation in patients. Degradable spinal fusion cages have promising potential with extensive perspectives. The purpose of this study was to fabricate a degradable spinal fusion cage from both polycaprolactone (PCL) and high-proportion beta-tricalcium phosphate (β-TCP), using the highly personalised, accurate, and rapid fused deposition modelling 3 D printing technology. PCL and β-TCP were mixed in three different ratios (60:40, 55:45, and 50:50). Both in vitro degradation and cell experiments proved that all cages with the different PCL:β-TCP ratios met the mechanical properties of human cancellous bone while maintaining their structural integrity. The biological activity of the cages improved with higher amounts of the β-TCP content. This study also showed that a spinal fusion cage with high β-TCP content and suitable mechanical properties can be manufactured using extruding rods and appropriate models, providing a new solution for the design of degradable spinal fusion cages.

Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration

Considering the specificity of periodontium and the unique advantages of electrospinning, this technology has been used to fabricate biodegradable tissue engineering materials for functional periodontal regeneration. For better biomedical quality, a continuous technological progress of electrospinning has been performed. Based on property of materials (natural, synthetic or composites) and additive novel methods (drug loading, surface modification, structure adjustment or 3 D technique), various novel membranes and scaffolds that could not only relief inflammation but also influence the biological behaviors of cells have been fabricated to achieve more effective periodontal regeneration. This review provides an overview of the usage of electrospinning materials in treatments of periodontitis, in order to get to know the existing research situation and find treatment breakthroughs of the periodontal diseases.

[Application of medical biomaterials in prevention and treatment of tendon adhesion]

OBJECTIVE

To review the research progress of medicine biomaterials in prevention and treatment of adhesion after tendon injury, and to provide reference for clinical treatment.

METHODS

The literature on the application of medical biomaterials in the prevention and treatment of tendon adhesions in recent years was reviewed, and the biological process, treatment methods, and current status of tendon adhesions were summarized.

RESULTS

Tendon adhesion as part of the healing process of the tendon is the biological response of the tendon to the injury and is also a common complication of joint dysfunction. Application of medical biomaterials can achieve better biological function of postoperative tendon by reducing the adhesion of peritendon tissues as far as possible without adversely affecting the tendon healing process.

CONCLUSION

The use of medical biomaterials is conducive to reduce the adhesion of tendon after operation, and the appropriate anti-adhesion material should be selected according to the patients' condition and surgical needs.