Counterfeit filtering facepiece respirators are posing an additional risk to health care workers during COVID-19 pandemic

[Health alerts for substandard, falsified, and unregistered medical products at the onset of the COVID-19 pandemic in the AmericasAlertas de saúde para produtos médicos abaixo do padrão, falsificados e não registrados no início da pandemia de COVID-19 nas Américas]

Objective

Identify and analyze incidents of substandard, falsified, unregistered, and stolen medical products at the onset of the COVID-19 pandemic.

Methods

Detailed search of the websites of regulatory authorities in the Americas. Identification of incidents of substandard, falsified, unregistered, and stolen medicines and medical devices (including in vitro diagnostics). The types of products were determined, as were the stages in the supply chain where they were detected, and the actions taken by authorities.

Results

A total of 1 273 incidents were identified in 15 countries (1 087 substandard, 44 falsified, 123 unregistered, and 19 stolen products). The largest number of incidents involved medical devices, disinfectants, and antiseptics. The most frequently reported point in the supply chain was online purchasing. The principal measures taken by the regulatory authorities were: alerts, prohibition of use, prohibition of advertising and manufacture, recall, and monitoring of adverse events.

Conclusions

A substantial number of incidents involving substandard, falsified, unregistered, and stolen medical products at the onset of the COVID-19 pandemic were identified. Shortages of supplies, easing of regulatory requirements, and increased demand are factors that may have led to an increase in the number of incidents. The national regulatory authorities of reference reported more frequent detection of incidents and more frequent application of health measures. A regulatory strategy is needed in order to address online sales and ensure the safe distribution of medical products.

Bacterial Cellulose: Nano-biomaterial for Biodegradable Face Masks- A Greener Approach Towards Environment

The use of face masks aids to stop the transmission of various deadly communicable ailments, and therefore widespread mask wearing habit is advocated by nearly all health organisations including the WHO to curb the COVID-19 pandemic. Recent studies predicted a shocking requirement of masks globally, approximately billions of masks per week in a single country, and maximum of them are disposable masks, which are made up of nonbiodegradable material such as polypropylene. With expanding review on improper masks disposal, it is imperative to perceive this inherent environmental hazard and avert it from resulting in the subsequent problematic situation due to plastic. The shift towards biodegradable biopolymers alternatives such as bacterial cellulose and newly evolving sustainable scientific knowledge would be significant to dealt with upcoming environmental problem. Bacterial cellulose possesses various desirable properties to replace the conventional mask material. This review gives an overview of data about accumulation of waste masks and its potential harm on environment. It also focuses on diverse characteristics of bacterial cellulose which make it suitable material for making mask and the challenges in the way of bacterial cellulose production and their possible solution. The current review also discussed the report on global bacterial cellulose market growth.

Review of drug recalls and quality of pharmaceutical products in Nepal

OBJECTIVES

To evaluate the pattern of substandard and falsified pharmaceutical products recall in Nepal.

SETTING

We analysed drug recall notices issued by the Department of Drug Administration (DDA), Nepal, and systematically reviewed peer-reviewed research articles during January 2010 to December 2020.

PARTICIPANTS

This study did not include human participants. However, data were collected from 72 drug recall notices issued by DDA and four research papers.

RESULTS

A total of 346 pharmaceutical products were recalled during the reported period. The number of recalled pharmaceutical products has increased significantly over the past decade in Nepal. The most frequently recalled drugs were antimicrobials followed by gastrointestinal medicines, vitamins and supplements and pain and palliative medicines among others. Number of imported recalled drugs were slightly higher (42.2%) than domestic recalled drugs (40.7%). Sixty-two percentage of recalled drugs were substandard, 11% were falsified and remaining 27% were not registered at the DDA. Similarly, higher number of modern drugs (62%) were recalled than traditional ones (35%). Hand sanitisers used to minimise COVID-19 transmission contributed significantly to the list of recalled pharmaceutical products in 2020. Most of these sanitisers contained significant amounts of methanol (as high as 75% v/v) instead of appropriate amount of ethyl or isopropyl alcohol. The peer-reviewed research papers reported issues with labelling, unregistered drugs and drugs failed in several laboratory testing.

CONCLUSION

Our analysis showed that number of recalls of substandard and falsified drugs are increasing in Nepal. Since the recall data in this paper did not include number of samples tested and location of samples collected, more studies to understand the prevalence of substandard and falsified drugs in Nepal is recommended.

Disinfection chain: A novel method for cheap reusable and chemical free disinfection of public places from SARS-CoV-2

Recently, Governments of several countries are taking steps to unlock their countries from the lockdown state to avoid the adverse effect on economy. Disinfection chains of Ultraviolet (UV)-C lamps supported by holding stands have been placed between the space of object columns for exposure-based disinfection. These chains can be folded easily for carrying purpose. Also, the length of the system can be varied depending upon the requirement. This simple system may be used for cheap, reusable and chemical free disinfection of public places. This system is also suitable to destroy the airborne viruses. But the process of disinfection must be performed in absence of human to avoid the harmful effect of UV rays on skin.

Discrepancy of particle passage in 101 mask batches during the first year of the Covid-19 pandemic in Germany

During the first wave of Covid-19 infections in Germany in April 2020, clinics reported a shortage of filtering face masks with aerosol retention> 94% (FFP2 & 3, KN95, N95). Companies all over the world increased their production capacities, but quality control of once-certified materials and masks came up short. To help identify falsely labeled masks and ensure safe protection equipment, we tested 101 different batches of masks in 993 measurements with a self-made setup based on DIN standards. An aerosol generator provided a NaCl test aerosol which was applied to the mask. A laser aerosol spectrometer measured the aerosol concentration in a range from 90 to 500 nm to quantify the masks' retention. Of 101 tested mask batches, only 31 batches kept what their label promised. Especially in the initial phase of the pandemic in Germany, we observed fluctuating mask qualities. Many batches show very high variability in aerosol retention. In addition, by measuring with a laser aerosol spectrometer, we were able to show that not all masks filter small and large particles equally well. In this study we demonstrate how important internal and independent quality controls are, especially in times of need and shortage of personal protection equipment.

An accessible method for screening aerosol filtration identifies poor-performing commercial masks and respirators

BACKGROUND

The COVID-19 pandemic has presented an acute shortage of regulation-tested masks. Many of the alternatives available to hospitals have not been certified, leaving uncertainty about their ability to properly protect healthcare workers from SARS-CoV-2 transmission.

OBJECTIVE

For situations where regulatory methods are not accessible, we present experimental methods to evaluate mask filtration and breathability quickly via cost-effective approaches (e.g., ~$2000 USD) that could be replicated in communities of need without extensive infrastructure. We demonstrate the need for screening by evaluating an existing diverse inventory of masks/respirators from a local hospital.

METHODS

Two experimental approaches are presented to examine both aerosol filtration and flow impedance (i.e., breathability). For one of the approaches ("quick assessment"), screening for appropriate filtration could be performed under 10 min per mask, on average. Mask fit tests were conducted in tandem but are not the focus of this study.

RESULTS

Tests conducted of 47 nonregulation masks reveal variable performance. A number of commercially available masks in hospital inventories perform similarly to N95 masks for aerosol filtration of 0.2 μm and above, but there is a range of masks with relatively lower filtration efficiencies (e.g., <90%) and a subset with poorer filtration (e.g., <70%). All masks functioned acceptably for breathability, and impedance was not correlated with filtration efficiency.

SIGNIFICANCE

With simplified tests, organizations with mask/respirator shortages and uncertain inventories can make informed decisions about use and procurement.

Medical face masks offer self-protection against aerosols: An evaluation using a practical in vitro approach on a dummy head

Since the appearance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the question regarding the efficacy of various hygiene measures and the use of personal protective equipment (PPE) has become the focus of scientific and above all public discussion. To compare respirators, medical face masks, and cloth masks and determine if it is recommendable to wear face masks to protect the individual wearer of the mask from inhaling airborne particles, we challenged 29 different masks with aerosols and tested the pressure drop as a surrogate for breathing resistance owing to the mask material. We found that Type II medical face masks showed the lowest pressure drop (12.9±6.8 Pa/cm²) and therefore additional breathing resistance, whereas respirators such as the KN95 (32.3±7.0 Pa/cm²) and FFP2 (26.8±7.4 Pa/cm²) showed the highest pressure drops among the tested masks. The filtration efficacy of the mask material was the lowest for cloth masks (28±25%) followed by non-certified face masks (63±19%) and certified medical face masks (70±10%). The materials of the different respirators showed very high aerosol retentions (KN95 [94±4%] and FFP2 [98±1%]). For evaluating the as-worn filtration performance simulating real live conditions each mask type was also tested on a standardized dummy head. Cloth masks and non-EN-certified face masks had the worst as-worn filtration efficacies among the tested masks, filtering less than 20% of the test aerosol. Remarkably, certified type II medical face masks showed similar (p>0.5) as-worn filtration results (47±20%) than KN95 masks (41±4%) and FFP2 masks (65±27%), despite having a lower pressure drop. Face shields did not show any significant retention function against aerosols in our experiment. Our results indicate that it seems recommendable to wear face masks for providing base protection and risk reduction against inhaling airborne particles, in low-risk situations. In our study, especially EN 14683 type II certified medical face masks showed protective effectiveness against aerosols accompanied by minimal additional breathing resistance. FFP2 Respirators, on the other hand, could be useful in high-risk situations but require greater breathing effort and therefore physical stress for users.

Personal protective equipment use by healthcare workers in intensive care unit during the early phase of COVID-19 pandemic in Italy: a secondary analysis of the PPE-SAFE survey

BACKGROUND

Italy was the first Western country to be heavily affected by COVID-19. Healthcare workers (HCWs) were exposed to a high risk of occupational infection, partially due to insufficient personal protective equipment (PPE) supplies. This study aimed to describe the practices, availability, training, confidence in PPE use and the adverse effects due to extended PPE use, as reported by HCWs in Italy. We also aimed to provide a comparison between Italian data and those from other countries.

METHODS

This study was a secondary analysis of a previously published international study, the PPE-SAFE Survey, conducted in April 2020. Data were analysed from the original study database.

RESULTS

We analysed the responses from 380 healthcare workers based in Italy, out of the 2711 respondents to the international survey. Among the Italian respondents, FFP2 and FFP3 respirators or equivalent were the most used masks for routine tasks (respectively 188/380, 50%; and 163/380, 43%). The median time of wearing PPE without taking a break was 5 h [interquartile range (IQR) 4-6], with statistically significant difference from other countries [median 4 h (IQR 2-5) p < 0.0001]. In Italy, 249 out of 380 (65%) HCWs had never performed a formal fit test for a N95 mask or equivalent and 91/380 (24%) never had a partner for donning and doffing procedures. Most of the respondents (299/380, 79%) had received formal training in PPE use at any time.

CONCLUSION

Most of the surveyed Italian HCWs reported working at above usual capacity, long shifts with PPE without breaks and routine use in intensive care unit of aerosol protection (e.g. FFP2/FFP3), hazmat suits and face shields/visors. The correct adherence to safety procedures (e.g. donning/doffing in pairs, performing fit test) has substantial scope for improvement in the future.

Optimized and Non-Optimized Personal Protective Equipment Use during the COVID-19 Pandemic in Thailand: A National Cross-Sectional Survey in a Resource-Limited Setting

INTRODUCTION

Coronavirus disease (COVID-19) is caused by the severe acute respiratory syndrome coronavirus 2 (SARS-COV2). COVID-19 is highly contagious, potentially fatal, and a global public health concern. Combining optimized personal protective equipment (PPE) use and hand hygiene is the best strategy for preventing COVID-19 in health care workers (HCWs).

METHODS

We conducted a national cross-sectional web-based survey of HCWs in the infection control program (IPC) in Thailand between May 5, 2020 and May 15, 2020. The primary objective was the prevalence of optimized PPE use amongst HCWs. The secondary objective was identification of the independent predictors of optimized PPE use.

RESULTS

We received a response from 46% of HCWs (756/1650), and all those who responded were nurse or HCWs who were registered in the IPC network. Five HCWs were excluded because of missing data, and 751 were included in the final analysis. The prevalences of PPE use were 22% (168/751) for optimized PPE use, 78% (583/751) for non-optimized PPE use, 35% (263/751) for PPE overuse, and 43% (320/751) for PPE underused. In univariate analysis, optimized PPE use was significantly associated with age, education level, knowledge of appropriate negative pressure room selection, and knowledge of apparently milder symptom severity in children than adults. In multivariate analysis, independent predictors of optimized PPE use were knowledge of appropriate negative pressure room selection (aOR = 1.95, 95% CI = 1.18-3.22), the difference in symptom severity between children and adults (aOR = 0.55, 95% CI = 0.37-0.81), and education level (aOR = 1.54, 95% CI = 1.04-2.27).

CONCLUSION

The prevalence of optimized PPE use amongst HCWs was 22%. Independent predictors of optimized PPE use were COVID-19 knowledge-based factors and education level. Therefore, the continued education training program should be implemented to ensure maintenance of appropriate practices during the COVID-19 pandemic.

KN95 and N95 Respirators Retain Filtration Efficiency despite a Loss of Dipole Charge during Decontamination

N95 decontamination protocols and KN95 respirators have been described as solutions to a lack of personal protective equipment. However, there are a few material science studies that characterize the charge distribution and physical changes accompanying disinfection treatments, particularly heating. Here, we report the filtration efficiency, dipole charge density, and fiber integrity of N95 and KN95 respirators before and after various decontamination methods. We found that the filter layers in N95 and KN95 respirators maintained their fiber integrity without any deformations during disinfection. The filter layers of N95 respirators were 8-fold thicker and had 2-fold higher dipole charge density than that of KN95 respirators. Emergency Use Authorization (EUA)-approved KN95 respirators showed filtration efficiencies as high as N95 respirators. Interestingly, although there was a significant drop in the dipole charge in both respirators during decontamination, there was no remarkable decrease in the filtration efficiencies due to mechanical filtration. Cotton and polyester face masks had a lower filtration efficiency and lower dipole charge. In conclusion, a loss of electrostatic charge does not directly correlate to the decreased performance of either respirator.

Rapid Review of SARS-CoV-1 and SARS-CoV-2 Viability, Susceptibility to Treatment, and the Disinfection and Reuse of PPE, Particularly Filtering Facepiece Respirators

In the COVID-19 pandemic caused by SARS-CoV-2, hospitals are often stretched beyond capacity. There are widespread reports of dwindling supplies of personal protective equipment (PPE), particularly N95-type filtering facepiece respirators (FFRs), which are paramount to protect frontline medical/nursing staff, and to minimize further spread of the virus. We carried out a rapid review to summarize the existing literature on the viability of SARS-CoV-2, the efficacy of key potential disinfection procedures against the virus (specifically ultraviolet light and heat), and the impact of these procedures on FFR performance, material integrity, and/or fit. In light of the recent discovery of SARS-CoV-2 and limited associated research, our review also focused on the closely related SARS-CoV-1. We propose a possible whole-of-PPE disinfection solution for potential reuse that could be rapidly instituted in many health care settings, without significant investments in equipment.

Assessment of N95 and K95 respirator decontamination: fiber integrity, filtration efficiency, and dipole charge density

Personal protective equipment (PPE) including N95 respirators are critical for persons exposed to SARS-CoV-2. KN95 respirators and N95 decontamination protocols have been described as solutions to a lack of such PPE. However, there are a few materials science studies that characterize the charge distribution and physical changes accompanying disinfection treatments particularly heating. Here, we report the filtration efficiency, dipole charge density, and fiber integrity of pristine N95 and KN95 respirators before and after various decontamination methods. We found that the filter layer of N95 is 8-fold thicker than that of KN95, which explains its 10% higher filtration efficiency (97.03 %) versus KN95 (87.76 %) under pristines condition. After 60 minutes of 70 °C treatment, the filtration efficiency and dipole charge density of N95 became 97.16% and 12.48 µC/m2, while those of KN95 were 83.64% and 1.48 µC/m2 ; moreover, fit factor of N95 was 55 and that of KN95 was 2.7. In conclusion, the KN95 respirator is an inferior alternative of N95 respirator. In both systems, a loss of electrostatic charge does not directly correlate to a decrease in performance.