Influence of solar irradiance levels on the formation of microalgae-bacteria aggregates for municipal wastewater treatment

Development and challenges of emerging biological technologies for algal-bacterial symbiosis systems: A review

The algal-bacterial symbiosis system (ABSS) is considered as a sustainable wastewater treatment process. This review provides a comprehensive overview of the mechanisms of ABSS for the removal of common pollutant, heavy metals, and especially for emerging pollutants. For the macroscopical level, this review not only describes in detail the reactor types, influencing factors, and the development of the algal-bacterial process, but also innovatively proposes an emerging process that combines an ABSS with other processes, which enhances the efficiency of removing difficult-to-biodegrade pollutants. Further for the microscopic level, interactions between algae and bacteria, including nutrient exchange, signaling transmission and gene transfer, have been deeply discussed the symbiotic relationship with nutrient removal and biomass production. Finally, recommendations are given for the future development of the ABSS. This review comprehensively examines ABSS principles, development, algal-bacterial interactions, and application in wastewater treatment, aiming to deepen theoretical and practical understanding and advance ABSS technology.

New insights into algal-bacterial sludge granulation based on the tightly-bound extracellular polymeric substances regulation in response to N-Methylpyrrolidone

Algal-bacterial granular sludge (ABGS) system is promising in wastewater treatment for its potential in energy-neutrality and carbon-neutrality. However, traditional cultivation of ABGS poses significant challenges attributable to its long start-up period and high energy consumption. Extracellular polymeric substances (EPS), which could be stimulated as a self-defense strategy in cells under toxic contaminants stress, has been considered to contribute to the ABGS granulation process. In this study, photogranulation of ABGS by EPS regulation in response to varying loading rates of N-Methylpyrrolidone (NMP) was investigated for the first time. The results indicated the formation of ABGS with a maximum average diameter of ∼3.3 mm and an exceptionally low SVI5 value of 67 ± 2 mL g-1 under an NMP loading rate of 125 mg L-1 d-1, thereby demonstrating outstanding settleability. Besides, almost complete removal of 300 mg L-1 NMP could be achieved at hydraulic retention time of 48 h, accompanied by chemical oxygen demand (COD) and total nitrogen (TN) removal efficiencies higher than 90 % and 70 %, respectively. Moreover, possible degradation pathway and metabolism mechanism in the ABGS system for enhanced removal of NMP and nitrogen were proposed. In this ABGS system, the mycelium with network structure constituted by filamentous microorganisms was a prerequisite for photogranulation, instead of necessarily leading to granulation. Stress of 100-150 mg L-1 d-1 NMP loading rate stimulated tightly-bound EPS (TB-EPS) variation, resulting in rapid photogranulation. The crucial role of TB-EPS was revealed with the involved mechanisms being clarified. This study provides a novel insight into ABGS development based on the TB-EPS regulation by NMP, which is significant for achieving the manipulation of photogranules.

Effect of microalgae and bacteria inoculation on the startup of bioreactors for paper pulp wastewater and biofuel production

The use of microalgae and bacteria as a strategy for the startup of bioreactors for the treatment of industrial wastewater can be a sustainable and economically viable alternative. This technology model provides satisfactory results in the nitrification and denitrification process for nitrogen removal, organic matter removal, biomass growth, sedimentation, and byproducts recovery for added-value product production. The objective of this work was to evaluate the performance of microalgae and bacteria in their symbiotic process when used in the treatment of paper pulp industry wastewater. The experiment, lasting fourteen days, utilized four bioreactors with varying concentrations in mgVSS/L of microalgae to bacteria ratio (R1-100:100, R2-100:300, R3-100:500, R4-300:100) in the startup process. Regarding the sludge volumetric index (SVI), the results show that the R1 and R2 reactors developed SVI30/SVI10 biomass in the range of 85.57 ± 7.33% and 84.72 ± 8.19%, respectively. The lipid content in the biomass of reactors R1, R2, R3 e R4 was 13%, 7%, 19%, and 22%, respectively. This high oil content at the end of the batch, may be related to the nutritional stress that the species underwent during this feeding regime. In terms of chlorophyll, the bioreactor with an initial inoculation of 100:100 showed better symbiotic growth of microalgae and bacteria, allowing exponential growth of microalgae. The total chlorophyll value for this bioreactor was 801.46 ± 196.96 μg/L. Biological removal of nitrogen from wastewater from the paper pulp industry is a challenge due to the characteristics of the effluent, but the four reactors operated in a single batch obtained good nitrogen removal. Ammonia nitrogen removal performances were 91.55 ± 9.99%, 72.13 ± 19.18%, 64.04 ± 21.34%, and 86.15 ± 30.10% in R1, R2, R3, and R4, respectively.

A critical review on phycoremediation of pollutants from wastewater-a novel algae-based secondary treatment with the opportunities of production of value-added products

Though the biological treatment employing bacterial strains has wide application in effluent treatment plant, it has got several limitations. Researches hence while looking for alternative biological organisms that can be used for secondary treatment came up with the idea of using microalgae. Since then, a large number of microalgal/cyanobacterial strains have been identified that can efficiently remove pollutants from wastewater. Some researchers also found out that the algal biomass not only acts as a carbon sink by taking up carbon dioxide from the atmosphere and giving oxygen but also is a renewable source of several value-added products that can be extracted from it for the commercial use. In this work, the cleaning effect of different species of microalgae/cyanobacteria on wastewater from varied sources along with the value-added products obtained from the algal biomass as observed by researchers during the past few years are reviewed. While a number of review works in the field of phycoremediation technology was reported in literature, a comprehensive study on phycoremediation of wastewater from different industries and household individually is limited. In the present review work, the efficiency of diverse microalgal/cyanobacterial strains in treatment of wide range of industrial effluents along with municipal wastewater having multi-pollutants has been critically reviewed.

Development, performance and microbial community analysis of a continuous-flow microalgal-bacterial biofilm photoreactor for municipal wastewater treatment

This work reported the development, performance and microbial community of microalgal-bacterial biofilms cultivated in a continuous-flow photoreactor for municipal wastewater treatment under various conditions. Results showed that microalgal-bacterial biofilms were successfully developed at a HRT of 9 h without external aeration, with a biofilm concentration of around 4690 mg/L being achieved in the steady-state. It was found that further increase of HRT to 12 h did not improve the overall accumulation of biofilm, whereas the growth of microalgae in biofilms was faster than bacteria in the initial stage, indicated by an increased chlorophyll-a&b content in biofilms. After which, the chlorophyll-a&b content in biofilms gradually stabilized at the level comparable with the seed, suggesting that there was a balanced distribution of microalgae and bacteria in biofilms. About 90% of TOC, 71.4% of total nitrogen and 72.6% of phosphorus were removed by microalgal-bacterial biofilms mainly through assimilation in the steady-state photoreactor run at the HRT of 12 h with external aeration. The community analysis further revealed that Cyanobacteria and Chloroflexi were the main components, while Chlorophyta appeared to be the dominant eukaryotic algal community in biofilms. This study could offer new insights into the development of microalgal-bacterial biofilms in a continuous-flow photoreactor for sustainable low-carbon municipal wastewater treatment.

Exploring resistomes and microbiomes in pilot-scale microalgae-bacteria wastewater treatment systems for use in low-resource settings

Antibiotic resistance genes (ARGs) released into the environment are an emerging human and environmental health concern, including ARGs spread in wastewater treatment effluents. In low-to-middle income countries (LMICs), an alternate wastewater treatment option instead of conventional systems are low-energy, high-rate algal ponds (HRAP) that use microalgae-bacteria aggregates (MABA) for waste degradation. Here we studied the robustness of ARG removal in MABA-based pilot-scale outdoor systems for 140 days of continuous operation. The HRAP system successfully removed 73 to 88 % chemical oxygen demand and up to 97.4 % ammonia, with aggregate size increasing over operating time. Fourteen ARG classes were identified in the HRAP influent, MABA, and effluent using metagenomics, with the HRAP process reducing total ARG abundances by up to 5-fold from influent to effluent. Parallel qPCR analyses showed the HRAP system significantly reduced exemplar ARGs (p < 0.05), with 1.2 to 4.9, 2.7 to 6.3, 0 to 1.5, and 1.2 to 4.8 log-removals for sul1, tetQ, blaKPC, and intl1 genes, respectively. Sequencing of influent, effluent and MABAs samples showed associated microbial communities differed significantly, with influent communities by Enterobacteriales (clinically relevant ARGs carrying bacteria), which were less evident in MABA and effluent. In this sense, such bacteria might be excluded from MABA due to their good settling properties and the presence of antimicrobial peptides. Microalgae-bacteria treatment systems steadily reduced ARGs from wastewater during operation time, using sunlight as the energetic driver, making them ideal for use in LMIC wastewater treatment applications.

Symbiotic relationship between filamentous algae (Halomicronema sp.) and extracellular polymeric substance-producing algae (Chlamydomonas sp.) through biomimetic simulation of natural algal mats

To lower the cost of biomass harvesting, the growth of natural biofilm is considered to be an optimal alternative to microalgae aggregation. This study investigated algal mats that naturally agglomerate into a lump and float on water surfaces. Halomicronema sp., a filamentous cyanobacterium with high cell aggregation and adhesion to substrates, and Chlamydomonas sp., which grows rapidly and produces high extracellular polymeric substances (EPS) in certain environments, are the main microalgae that make up selected mats through next-generation sequencing analysis. These two species play a major role in the formation of solid mats, and showed a symbiotic relationship as the medium and nutritional source, particularly owing to the large amount of EPS formed by the reaction between EPS and calcium ions through zeta potential and Fourier-transform infrared spectroscopy analysis. This led to the formation of an ecological biomimetic algal mat (BAM) that mimics the natural algal mat system, and this is a way to reduce costs in the biomass production process as there is no separate treatment process for harvesting.

Effects of fluidised carriers on the community composition, settleability and energy production of indigenous microalgal consortia cultivated in treated wastewater

Fluidised-bed systems are a promising approach to microalgal cultivation, but few studies have considered their application to indigenous microalgal consortia (IMCs), which have high adaptability to wastewater. In this study, IMCs were cultivated in treated wastewater with and without fluidised carriers, and the effects of operating parameters were considered. Microalgae in the culture were confirmed to originate from the carriers, and the IMC presence on the carriers was promoted by decreasing the carrier replacement number and increasing the culture replacement volume. The presence of carriers enabled greater nutrient removal from the treated wastewater by the cultivated IMCs. Without carriers, IMCs in the culture were scattered and showed poor settleability. With carriers, IMCs in the culture exhibited good settleability owing to floc formation. The improved settleability with carriers also increased the energy production from sedimented IMCs.

Strategy for the formation of microalgae-bacteria aggregates in high-rate algal ponds

This work studied the formation of aggregates used for wastewater treatment in high-rate algal ponds (HRAP). For this, the establishment of microalgae-bacteria aggregates in these systems was evaluated, considering strategies for the inoculation and start-up. Two HRAP were operated in parallel, at first in batch mode and then in continuous flow. The wastewater treatment was efficient, with removal rates around 80% for COD and N-ammoniacal. Volatile suspended solids and chlorophyll for the culture grew continuously reached a concentration of 548 ± 11 mg L^-1 and 7.8 mg L^-1, respectively. Larger photogranules were observed when the system was placed in a continuous regime. The protein fraction of extracellular polymeric substances was identified as a determinant in photogranules formation. During the continuous regime, more than 50% of the biomass was higher than 0.2 mm, flocculation efficiency of 78 ± 6%, and the volumetric sludge index of 32 ± 5 mL g^-1. The genetic sequencing showed the growth of cyanobacteria in the aggregate and the presence of microalgae from the chlorophytes and diatoms groups in the final biomass.

Formation characteristics of algal-bacteria granular sludge under low-light environment: From sludge characteristics, extracellular polymeric substances to microbial community

In this study, the formation characteristics of algal-bacteria granular sludge (ABGS) under low-light environment (80, 110, and 140 μmol/m²/s) were investigated. The findings revealed that the stronger light intensity favored the improvement of sludge characteristics, nutrient removal performances, and extracellular polymeric substance (EPS) secretion at the growing stage, which were more preferential to facilitate the formation of ABGS. However, after the mature stage, the weaker light intensity ensured more stable operation of the system, as shown by contributing to sludge settlement performance, denitrification, and EPS secretion. According to the results of high-throughput sequencing, the dominant bacterial genus of the mature ABGS cultured under low light intensity were all Zoogloe, while the dominant algal genus was different. For the mature ABGS, the 140 and 80 μmol/m²/s light intensity had the most significant activation effect to the functional genes related to carbohydrate metabolism and amino acid metabolism, respectively.

Microalgae-based wastewater treatment: Mechanisms, challenges, recent advances, and future prospects

The rapid expansion of both the global economy and the human population has led to a shortage of water resources suitable for direct human consumption. As a result, water remediation will inexorably become the primary focus on a global scale. Microalgae can be grown in various types of wastewaters (WW). They have a high potential to remove contaminants from the effluents of industries and urban areas. This review focuses on recent advances on WW remediation through microalgae cultivation. Attention has already been paid to microalgae-based wastewater treatment (WWT) due to its low energy requirements, the strong ability of microalgae to thrive under diverse environmental conditions, and the potential to transform WW nutrients into high-value compounds. It turned out that microalgae-based WWT is an economical and sustainable solution. Moreover, different types of toxins are removed by microalgae through biosorption, bioaccumulation, and biodegradation processes. Examples are toxins from agricultural runoffs and textile and pharmaceutical industrial effluents. Microalgae have the potential to mitigate carbon dioxide and make use of the micronutrients that are present in the effluents. This review paper highlights the application of microalgae in WW remediation and the remediation of diverse types of pollutants commonly present in WW through different mechanisms, simultaneous resource recovery, and efficient microalgae-based co-culturing systems along with bottlenecks and prospects.

Evaluating the role of algae in algal-bacterial granular sludge: Nutrient removal, microbial community and granular characteristics

Algal-bacterial granular sludge (ABGS) and bacterial granular sludge (BGS, control group) were operated over 240 days to investigate the role of algae in treating synthetic municipal wastewater. The results showed that algae significantly improved the removal efficiency of total nitrogen (TN). The nitrogen removal load of ABGS was 2.6 mg-N/g-VSS/day (22.8 %, light) and 1.1 mg-N/g-VSS/day (9.6 %, dark) higher than that of BGS, respectively, which was attributed to algae enhanced NH₃-N removal capacity in the anaerobic stage and increased the utilization efficiency of organics in denitrification. Algae increased the relative abundance of denitrifying bacteria, and ABGS (28.83 %) was higher than BGS (14.28 %). Moreover, the dominant phylum of algae was Chlorophyta (98.39 %), the chlorophyll-a was sustained at 1.28 ± 0.26 mg/g-VSS. Algae significantly increased the content of extracellular polymeric substances (EPS), and the increased polysaccharide came from the tightly bound EPS. This study expands the understanding of the role of algae in ABGS.

Understanding the influence of free nitrous acid on microalgal-bacterial consortium in wastewater treatment: A critical review

Microalgal-bacterial consortium (MBC) constitutes a sustainable and efficient alternative to the conventional activated sludge process for wastewater treatment (WWT). Recently, integrating the MBC process with nitritation (i.e., shortcut MBC) has been proposed to achieve added benefits of reduced carbon and aeration requirements. In the shortcut MBC system, nitrite or free nitrous acid (FNA) accumulation exerts antimicrobial influences that disrupt the stable process performance. In this review, the formation and interactions that influence the performance of the MBC were firstly summarized. Then the influence of FNA on microalgal and bacterial monocultures and related mechanisms together with the knowledge gaps of FNA influence on the shortcut MBC were highlighted. Other challenges and future perspectives that impact the scale-up of the shortcut MBC for WWT were illustrated. A potential roadmap is proposed on how to maximize the stable operation of the shortcut MBC system for sustainable WWT and high-value biomass production.

One-step co-cultivation and flocculation of microalgae with filamentous fungi to valorize starch wastewater into high-value biomass

A novel method of one-step co-cultivation and harvesting of microalgae and fungi, for efficient starch wastewater treatment and high-value biomass production was developed. By combination of Aspergillus oryzae and Chlorella pyrenoidosa, nutrients in wastewater could be converted to useful microbial biomass, while the wastewater was purified. Moreover, the microalgae C. pyrenoidosa could gradually be encapsulated in fungal pellets which promoted the biomass harvesting. The free algal cells could be completely harvested by fungal pellets within 72 h. The synergistic effects between them greatly improved the removal efficiencies of main pollutants as the removal efficiency of COD, TN, and TP reached 92.08, 83.56, and 96.58 %, respectively. In addition, the final biomass concentration was higher than that of individual cultures. The protein and lipid concentration was also significantly improved and reached 1.92 and 0.99 g/L, respectively. This study provides a simple and efficient strategy for simultaneous wastewater treatment and high-value biomass production.

Optimization of Microalgae–Bacteria Consortium in the Treatment of Paper Pulp Wastewater

The microalgae–bacteria consortium is a promising and sustainable alternative for industrial wastewater treatment, since it may allow good removal of organic matter and nutrients, as well as the possibility of producing products with added value from the algae biomass. This research investigated the best bacterial and microalgae inoculation ratio for system start-up and evaluation of removing organic matter (as chemical oxygen demand (COD)), ammoniacal nitrogen (NH4+–N), nitrite nitrogen (NO2−–N), nitrate nitrogen (NO3−–N), phosphate phosphorus (PO43−–P) and biomass formation parameters in six photobioreactors with a total volume of 1000 mL. Reactors were operated for 14 days with the following ratios of pulp mill biomass aerobic (BA) and Scenedesmus sp. microalgae (MA): 0:1 (PBR1), 1:0 (PBR2), 1:1 (PBR3), 3:1 (PBR4), 5:1 (PBR5), and 1:3 (PBR6). Results show that COD removal was observed in just two days of operation in PBR4, PBR5, and PBR6, whereas for the other reactors (with a lower rate of initial inoculation) it took five days. The PBR5 and PBR6 performed better in terms of NH4+–N removal, with 86.81% and 77.11%, respectively, which can be attributed to assimilation by microalgae and nitrification by bacteria. PBR6, with the highest concentration of microalgae, had the higher PO43−–P removal (86%), showing the advantage of algae in consortium with bacteria for phosphorus uptake. PBR4 and PBR5, with the highest BA, led to a better biomass production and sedimentability on the second day of operation, with flocculation efficiencies values over 90%. Regarding the formation of extracellular polymeric substances (EPS), protein production was substantially higher in PBR4 and PBR5, with more BA, with average concentrations of 49.90 mg/L and 49.05 mg/L, respectively. The presence of cyanobacteria and Chlorophyceae was identified in all reactors except PBR1 (only MA), which may indicate a good formation and structuring of the microalgae–bacteria consortium. Scanning electron microscopy (SEM) analysis revealed that filamentous microalgae were employed as a foundation for the fixation of bacteria and other algae colonies.

Advanced light-tolerant microalgae-nitrifying bacteria consortia for stable ammonia removal under strong light irradiation using light-shielding hydrogel

The consortium of microalgae and nitrifying bacteria has attracted attention owing to its advantages, such as energy- and cost-efficiency in terms of using only light irradiation without aeration. However, high light intensity can easily cause photoinhibition of nitrifying bacteria, resulting in process breakdown of the consortium. This challenge limits its practical application in outdoor environment. In a previous study, we developed a "light-shielding hydrogel" which entrapped nitrifying bacteria in carbon black-added alginate hydrogel beads and confirmed its effectiveness of protecting the nitrifying bacteria from intense light up to 1600 μmol photons m^-2 s^-1. However, the applicability of the light-shielding hydrogel to microalgae-nitrifying bacteria consortia under strong light irradiation has not yet been clarified. In this study, we aimed to establish consortia of Chlorella sorokiniana and nitrifying bacteria immobilised in light-shielding hydrogel and evaluate their nitrification performance under strong light. Three nitrifying bacteria conditions were used: light-shielding hydrogel, hydrogel containing only nitrifying bacteria without carbon black ('hydrogel'), and dispersed nitrifier without immobilisation ('dispersion') as a control. At 1600 μmol photons m^-2 s^-1, the dispersion afforded a significant decrease in nitrification activity and subsequent process breakdown. In contrast, light-shielding hydrogel achieved complete nitrification without nitrite accumulation and had nitrification rates of approximately nine and two times higher than those for the dispersion and hydrogel conditions, respectively. Based on the overall evaluation, a possible sequence of process breakdown under strong light was also proposed. This study demonstrated for the first time that the light-shielding hydrogel/consortia combination had potential for applications, which require mitigation of photoinhibition under strong light irradiation. Further, it is expected that the proposed method will contribute to realise the practical application of microalgae-nitrifying bacteria consortia in various countries that experience high sunlight intensity due to their location in the sunbelt areas.

Microalgal-bacterial granular sludge for municipal wastewater treatment: From concept to practice

Recently, increasing interest has been placed in microalgal-bacterial granular sludge (MBGS) in the journey towards the energy and carbon neutrality of municipal wastewater treatment. Different from aerobic granular sludge, the performance of MBGS is mainly determined by the mutualism and symbiosis between coexisting microalgae and bacteria. It appears from the literature that most of studies on MBGS were conducted at small benchtop scales under controlled conditions with synthetic wastewater. Therefore, this article attempts to look into the major engineering gaps between the knowledge generated from numerous laboratory research works and the large-scale application of MBGS, including massive production of MBGS, type of bioreactor, effect of alternate photo and dark metabolisms on effluent quality, resource recovery from waste MBGS, etc. It is clearly demonstrated that MBGS is still at its infant stage, and more effort is strongly needed to identify the technological bottlenecks of full-scale applications, while providing corresponding engineering solutions.

Role of nitrogen transport for efficient energy conversion potential in low carbon and high nitrogen/phosphorus wastewater by microalgal-bacterial system

Microalgal-bacterial system (MBS) is potential biotechnology in wastewater treatment because it can remedy defects of conventional processes (e.g., insufficient carbon source and imbalanced elements ratio). However, the mechanisms of nitrogen (N) transport and removal in MBS are still unclear. In this study, it was discovered that MBS was conducive to adsorb NH₄⁺-N and NO₃^--N through electrical neutralization, while extracellular polymeric substances (EPS) could provide binding sites (e.g., -OH and -CH₃) for enhancing N transport and removal. The microalgae-bacteria interaction could accelerate N transport and removal from aqueous solution to cell. More importantly, the microalgal starch biosynthetic metabolism exhibited demonstrating the energy production potential could be boosted via MBS. Overall, the NO₃^--N and NH₄⁺-N removal efficiencies, and energy yield were 82.28%, 94.15%, and 86.81 kJ/L, respectively, which are better than other relevant studies. Altogether, it is meaningful for revealing the applicability of MBS for treating wastewater and producing energy.

An overview on microalgal-bacterial granular consortia for resource recovery and wastewater treatment

Excessive generation of wastewater is a matter of concern around the globe. Wastewater treatment utilizing a microalgae-mediated process is considered an eco-friendly and sustainable method of wastewater treatment. However, low biomass productivity, costly harvesting process, and energy extensive cultivation process are the major bottleneck. The use of the microalgal-bacteria granular consortia (MBGC) process is economic and requires less energy. For efficient utilization of MBGC, knowledge of its structure, composition and interaction are important. Various microscopic, molecular and metabolomics techniques play a significant role in understating consortia structure and interaction between partners. Microalgal-bacteria granular consortia structure is affected by various cultivation parameters like pH, temperature, light intensity, salinity, and the presence of other pollutants in wastewater. In this article, a critical evaluation of recent literature was carried out to develop an understanding related to interaction behavior that can help to engineer consortia having efficient nutrient removal capacity with reduced energy consumption.

Emerging biological wastewater treatment using microalgal-bacterial granules: A review

Aiming at deepening the understanding of the formation and evolution of emerging microalgal-bacterial granule (MBG)-based wastewater treatment systems, the recent advances regarding the formation processes, transfer phenomena, innovative bioreactors development and wastewater treatment performance of MBG-based systems are comprehensively reviewed in this work. Particularly, the successful establishments of MBG-based systems with various inocula are summarized. Besides, as the indispensable factors for biochemical reactions in MBGs, the light and substrates (organic matters, inorganic nutrients, etc) need to undergo complicated and multi-scale transfer processes before being assimilated by microorganisms within MBGs. Therefore, the involved transfer phenomena and mechanisms in MBG-based bioreactors are critically discussed. Subsequently, some recent advances of MBG-based bioreactors, the application of MBG-based systems in treating various synthetic and real wastewater, and the future development directions are discussed. In short, this review helps in promoting the development of MBG-based systems by presenting current research status and future perspectives.

A comprehensive review on the use of algal-bacterial systems for wastewater treatment with emphasis on nutrient and micropollutant removal

The scarcity of water resources and environmental pollution have highlighted the need for sustainable wastewater treatment. Existing conventional treatment systems are energy-intensive and not always able to meet stringent disposal standards. Recently, algal-bacterial systems have emerged as environmentally friendly sustainable processes for wastewater treatment and resource recovery. The algal-bacterial systems work on the principle of the symbiotic relationship between algae and bacteria. This paper comprehensively discusses the most recent studies on algal-bacterial systems for wastewater treatment, factors affecting the treatment, and aspects of resource recovery from the biomass. The algal-bacterial interaction includes cell-to-cell communication, substrate exchange, and horizontal gene transfer. The quorum sensing (QS) molecules and their effects on algal-bacterial interactions are briefly discussed. The effect of the factors such as pH, temperature, C/N/P ratio, light intensity, and external aeration on the algal-bacterial systems have been discussed. An overview of the modeling aspects of algal-bacterial systems has been provided. The algal-bacterial systems have the potential for removing micropollutants because of the diverse possible interactions between algae-bacteria. The removal mechanisms of micropollutants - sorption, biodegradation, and photodegradation, have been reviewed. The harvesting methods and resource recovery aspects have been presented. The major challenges associated with algal-bacterial systems for real scale implementation and future perspectives have been discussed. Integrating wastewater treatment with the algal biorefinery concept reduces the overall waste component in a wastewater treatment system by converting the biomass into a useful product, resulting in a sustainable system that contributes to the circular bioeconomy.

Towards environment-sustainable wastewater treatment and reclamation by the non-aerated microalgal-bacterial granular sludge process: Recent advances and future directions

Currently, we are increasingly aware of the environmental unsustainability of the conventional wastewater treatment processes, e.g. extensive energy consumption and greenhouse gases emission. As such, the light-motivated non-aerated microalgal-bacterial granular sludge (MBGS) process has drawn extensive attention recently. This review aims to offer the important recent advances and future directions on the emerging non-aerated MBGS process for wastewater treatment and reclamation. The formation mechanism of MBGS from activated sludge is revealed to be the mobility under environmental stress such as shear force and nutrient deficiency. The key environmental factors affecting the non-aerated MBGS process are analyzed in terms with light, temperature, stirring and influent composition. Furthermore, sceneries of future outdoor processes by non-aerated MBGS are outlined. In turns out that the non-aerated MBGS offers a harmonious ecosystem to enrich the pollutants from wastewater to biomass, which can be potentially utilized as biofertilizer and feed for plant and animal, respectively. This review is expected to deepen our insights into the emerging non-aerated MBGS process for environment-sustainable wastewater treatment and reclamation.

Nitrogen and phosphorus removal efficiency and algae viability in an immobilized algae and bacteria symbiosis system with pink luminescent filler

In this study, an immobilized algae and bacteria symbiotic biofilm reactor (ABSBR) with pink luminescent filler (PLF) was constructed. The effects of PLF addition in the construction of an algae and bacteria symbiotic biofilm system on the nitrogen and phosphorus removal efficiencies and algae viability were evaluated. Our results showed that for influent TN and TP concentrations of 40 ± 5 and 5 ± 0.8 mg/L, respectively, the pollutant removal rates (PRRs) of TN and TP by the ABSBR can reach up to 74.74% and 88.36%, respectively. The chlorophyll-a (chl-a) concentration on the PLF reaches approximately 5,500 μg/L with a specific oxygen generation rate (SOGR) of 65.48 μmolO₂ mg^-1Chl-a h^-1. These results indicate that the adding PLF into algae and bacteria symbiosis systems can effectively improve the nitrogen and phosphorus removal efficiencies of the sewage as well as increase biomass and viability of the algae in the system.

Advanced biokinetic and hydrodynamic modelling to support and optimize the design of full-scale high rate algal ponds

High rate algal ponds (HRAP) are known for their suitability to treat wastewater and to produce microalgal biomass, which can be converted into bioproducts. However, full-scale application of HRAP is still limited to few cases, and design procedures are not consolidated or standardized. In this study, a demonstrative-scale HRAP system for secondary wastewater treatment to be implemented in India (treatment capacity of 50 m3·d-1) has been designed combining conventional dimensioning techniques and advanced modelling tools. The objective of the study was to assist, verify and optimize the conventional dimensioning of the secondary HRAP by means of simulations predicting the behaviour of the system in the specific local conditions under different configurations and operational strategies. Biokinetic modelling and hydrodynamic analysis using Computational Fluid Dynamics (CFD) were carried out. The simulations performed with the biokinetic model showed that the optimal hydraulic retention time to enhance nutrient removal and biomass production is 4 days. For the hydrodynamic modelling, a 3D model of the HRAP was built to simulate the hydrodynamic behaviour of 36 different designs. Simulations allowed quantifying the presence of low velocity zones as well as the land use efficiency of the different designs in terms of the useful area vs. the total occupied area. Two baffles and tear-shapes with a diameter equal to ¼ of the channel width was the most efficient configuration. Moreover, a technical-economic assessment of the system was carried out, resulting in an investment cost of 483 € per population equivalent and an operational cost of 0.19 € per m3 of treated wastewater.

Microalga-Mediated Tertiary Treatment of Municipal Wastewater: Removal of Nutrients and Pathogens

The microalgal strain Chlorella sorokiniana isolated from a waste stabilization pond was used for tertiary treatment of municipal wastewater. Three light:dark (L:D) regimes of 12:12, 16:8, and 24:0 were used for treating wastewater in microalga (A), microalga + sludge (A + S), and sludge (S) reactors. The removal of nutrients (N and P) was found to be the highest in the microalga-based reactor, with more than 80% removal of biochemical oxygen demand (BOD) and 1.2–5.6 log unit removal of pathogens. The addition of sludge improved chemical oxygen demand (COD) removal. Nitrifiers were found to be predominant in the A + S reactor. Algal biomass productivity was more than 280 mg/L/d in all the L:D regimes. The increase in light regime improved nutrient removal and biomass productivity in the algal reactor. Results of the kinetic study showed that (i) nitrifiers had more affinity for ammonium than microalga, and hence, most of the ammonia was oxidized to nitrate, (ii) microalga assimilated nitrate as the primary nitrogen source in the A + S reactor, and (iii) solubilization of particulate organic nitrogen originated from dead cells reduced the nitrogen removal efficiency. However, in the microalga-based reactor, the ammonium uptake was higher than nitrate uptake. Among pathogens, the removal of Salmonella and Shigella was better in the A + S reactor than in the other two reactors (microalga and sludge reactor). Additionally, the heterotrophic plate count was drastically reduced in the presence of microalga. No such drastic reduction was observed in the stand-alone sludge reactor. Kinetic modeling revealed that microalga–pathogen competition and pH-induced die-off were the two predominant factors for pathogen inactivation.

Influence of wavelength photoperiods and N/P ratio on wastewater treatment with microalgae-bacteria

This research investigates the effect of mixing wavelength light photoperiods (12 h blue, 8 h blue: 4 h green, 4 h blue: 8 h green, and 12 h green) and N/P ratios (1.3 to 8.3) on the growth microalgae-bacteria systems, organic matter, and nutrient removals. The highest microalgae-bacteria growth performance (μ = 0.2 d^-1, 481.1 ± 15.3 mg DW L^-1) was observed when a 8 h blue: 4 h green mixed wavelength and a low N/P ratio were used. For both N/P ratios, biomass productivity was favored when using the blue light dominated at longer time periods. Mechanisms for nitrogen removal by assimilation depend on the N/P ratio, achieving assimilation between 49 and 65% at a low N/P ratio. High nitrogen removal (>50%) showed a strong relation with alkalinity culture conditions (pH > 8.5). The mixing of wavelength photoperiods seems to be a promising strategy to achieve high biomass productivity and nutrient removal. However, for optimal conditions, N/P ratios in the wastewater should be considered.

Reactivation of Frozen Stored Microalgal-Bacterial Granular Sludge under Aeration and Non-Aeration Conditions

In this paper, reactivation of microalgal-bacterial granular sludge (MBGS) stored at −20 °C for 6 months was investigated under respective aeration (R1) and non-aeration (R2) conditions. Results showed that the granular activity could be fully recovered within 21 days. The average removal efficiency of ammonia was higher in R1 (92.78%), while R2 showed higher average removal efficiencies of organics (84.97%) and phosphorus (85.28%). It was also found that eukaryotic microalgae growth was stimulated under aeration conditions, whereas prokaryotic microalgae growth and extracellular protein secretion were favored under non-aeration conditions. Sequencing results showed that the microbial community underwent subversive evolution, with Chlorophyta and Proteobacteria being dominant species under both conditions. Consequently, it was reasonable to conclude that the activity and structure of frozen stored MBGS could be recovered under both aeration and non-aeration conditions, of which aeration-free activation was more feasible on account of its energy-saving property. This study provides important information for the storage and transportation of MBGS in wastewater treatment.

Thermophilic biogas production from microalgae-bacteria aggregates: biogas yield, community variation and energy balance

Biogas production through anaerobic mesophilic digestion is the most straightforward biofuel production route integrated into microalgae-bacteria wastewater treatment plants. Improvement of this biofuel route without adding pretreatment units is possible through the temperature increase. This paper presents a comprehensive evaluation of the transitory effect of different temperatures (35 °C and 55 °C) and hydraulic retention times (HRT) of 15 and 30 d on the long-term methane production using non-pretreated microalgae-bacteria aggregates as a feedstock. The thermophilic transition from mesophilic inoculum adapted to microalgae-bacteria aggregate increased 1.7-fold the methane production (0.41 m³CH₄ kgVS^-1) at HRT of 30 d. A substantial decrease in the microbial community's diversity present in the anaerobic reactor was observed when thermophilic conditions were applied, explaining the long adaptation period needed. The increase of the operative temperature condition promotes changes in the dominance pathway of methanogenesis from hydrogenotrophic to acetolactic. The energy balance assessment showed a positive net energy ratio when the digester was operated at an HRT of 30 d. A maximum net energy ratio of 1.5 was achieved at mesophilic temperature. This study demonstrated, based on experimental data, that microalgal digestion with an HRT of 30 d favors energy self-sustainability in microalgal wastewater treatment plants.

Interactions of microalgae-bacteria consortia for nutrient removal from wastewater: A review

Nitrogen and phosphorus pollution can cause eutrophication, resulting in ecosystem disruption. Wastewater treatment systems employing microalgae-bacteria consortia have the potential to enhance the nutrient removal efficiency from wastewater through mutual interaction and synergetic effects. The knowledge and control of the mechanisms involved in microalgae-bacteria interaction could improve the system's ability to transform and recover nutrients. In this review, a critical evaluation of recent literature was carried out to synthesize knowledge related to mechanisms of interaction between microalgae and bacteria consortia for nutrient removal from wastewater. It is now established that microalgae can produce oxygen through photosynthesis for bacteria and, in turn, bacteria supply the required metabolites and inorganic carbon source for algae growth. Here we highlight how the interaction between microalgae and bacteria is highly dependent on the nitrogen species in the wastewater. When the nitrogen source is ammonium, the generated oxygen by microalgae has a positive influence on nitrifying bacteria. When the nitrogen source is nitrate, the oxygen can have an inhibitory effect on denitrifying bacteria. However, some strains of microalgae have the capability to supply hydrogen gas for hydrogenotrophic denitrifiers as an energy source. Recent literature on biogranulation of microalgae and bacteria and its application for nutrient removal and biomass recovery is also discussed as a promising approach. Significant research challenges remain for the integration of microalgae-bacteria consortia into wastewater treatment processes including microbial community control and process stability over long time horizons.

Novel sequential flow baffled microalgal-bacterial photobioreactor for enhancing nitrogen assimilation into microalgal biomass whilst bioremediating nutrient-rich wastewater simultaneously

A novel sequential flow baffled microalgal-bacterial (SFB-AlgalBac) photobioreactor was designed to cater for the synergistic interactions between microalgal and bacterial consortia to enhance nitrogen assimilation into microalgal biomass from nutrient-rich wastewater medium. The performance of the SFB-AlgalBac photobioreactor was found to be optimum at the influent flow rate of 5.0 L/d, equivalent to 20 days of hydraulic retention time (HRT). The highest microalgal nitrogen assimilation rate (0.0271 /d) and biomass productivity (1350 mg/d) were recorded amidst this flow rate. Further increase to the 10.0 L/d flow rate reduced the photobioreactor performance, as evidenced by a reduction in microalgal biomass productivity (>10%). The microalgal biomass per unit of nitrogen assimilated values were attained at 16.69 mg/mg for the 5.0 L/d flow rate as opposed to 7.73 mg/mg for the 10.0 L/d flow rate, despite both having comparable specific growth rates. Also, the prior influent treatment by activated sludge was found to exude extracellular polymeric substances which significantly improved the microalgal biomass settleability up to 37%. The employment of SFB-AlgalBac photobioreactor is anticipated could exploit the low-cost nitrogen sources from nutrient-rich wastewaters via bioconversion into valuable microalgal biomass while fulfilling the requirements of sustainable wastewater treatment technologies.

Wastewater treatment using oxygenic photogranule-based process has lower environmental impact than conventional activated sludge process

The Life Cycle Assessment (LCA) methodology was applied to assess the environmental feasibility of a novel wastewater treatment technology based on oxygenic photogranules (OPG) biomass in comparison to a conventional activated sludge (CAS) system. LCA using laboratory scale experimental data allowed for eco-design of the process during the early stage of process development at laboratory scale. Electricity consumption related to artificial lighting, the fate of the generated biomass (renewable energy and replacement of mineral fertilizer), and the nitrogen flows in the OPG system were identified as major contributors to the potential environmental impact of the OPG treatment system. These factors require optimization in order to reduce the environmental impact of the overall OPG system. Nonetheless, the environmental impact of a non-optimized OPG scenario was generally lower than for a CAS reference system. With an optimization of the artificial lighting system, an energy neutral treatment system may be within reach.

Non-surface Attached Bacterial Aggregates: A Ubiquitous Third Lifestyle

Bacteria are now generally believed to adopt two main lifestyles: planktonic individuals, or surface-attached biofilms. However, in recent years medical microbiologists started to stress that suspended bacterial aggregates are a major form of bacterial communities in chronic infection sites. Despite sharing many similarities with surface-attached biofilms and are thus generally defined as biofilm-like aggregates, these non-attached clumps of cells in vivo show much smaller sizes and different formation mechanisms. Furthermore, ex vivo clinical isolates were frequently reported to be less attached to abiotic surfaces when compared to standard type strains. While this third lifestyle is starting to draw heavy attention in clinical studies, it has a long history in natural and environmental sciences. For example, marine gel particles formed by bacteria attachment to phytoplankton exopolymers have been well documented in oceans; large river and lake snows loaded with bacterial aggregates are frequently found in freshwater systems; multispecies bacterial "flocs" have long been used in wastewater treatment. This review focuses on non-attached aggregates found in a variety of natural and clinical settings, as well as some recent technical developments facilitating aggregate research. The aim is to summarise the characteristics of different types of bacterial aggregates, bridging the knowledge gap, provoking new perspectives for researchers from different fields, and highlighting the importance of more research input in this third lifestyle of bacteria closely relevant to our daily life.

Development of integrated culture systems and harvesting methods for improved algal biomass productivity and wastewater resource recovery - A review

Microalgae biomass has been considered as a potential feedstock for the production of renewable chemicals and biofuels. Microalgae culture combined with wastewater treatment is a promising approach to improve the sustainability of the business model. However, algae culture and harvest account for the majority of the high costs, hindering the development of the microalgae-based wastewater utilization. Cost-effective culture systems and harvesting methods for enhancing biomass yield and reducing the cost of resource recovery have become extremely urgent and important. In this review, different commonly used culture systems for microalgae are discussed; the current harvesting methods with different culture systems have also been evaluated. Also, the inherent characteristics of inefficiency in algae wastewater treatment are elaborated. Current literature collectively supports that a biofilm type device is a system designed for higher biomass productivity, and offers ease of harvesting, in small-scale algae cultivation. Additionally, bio-flocculation, which uses one kind of flocculated microalgae to concentrate on another kind of non-flocculated microalgae is a low-cost and energy-saving alternative harvesting method. These findings provide insight into a comprehensive understanding of integrated culture systems and harvesting methods for microalgae-based wastewater treatment.

Mapping the biological activities of filamentous oxygenic photogranules

Oxygenic photogranules have been suggested as alternatives to activated sludge in wastewater treatment. Challenging for modeling photogranule-based processes is the heterogeneity of photogranule morphologies, resulting in different activities by photogranule type. The measurement of microscale-activities of filamentous photogranules is particularly difficult because of their labile interfaces. We present here an experimental and modeling approach to quantify phototrophic O₂ production, heterotrophic O₂ consumption, and O₂ diffusion in filamentous photogranules. We used planar optodes for the acquisition of spatio-temporal oxygen distributions combined with two-dimensional mathematical modeling. Light penetration into the photogranule was the factor controlling photogranule activities. The spatial distribution of heterotrophs and phototrophs had less impact. The photosynthetic response of filaments to light was detectable within seconds, emphasizing the need to analyze dynamics of light exposure of individual photogranules in photobioreactors. Studying other recurring photogranule morphologies will eventually enable the description of photogranule-based processes as the interplay of interacting photogranule populations.

A self-sustaining synergetic microalgal-bacterial granular sludge process towards energy-efficient and environmentally sustainable municipal wastewater treatment

Globally increasing concerns have been raised on the high energy consumption and greenhouse gas emissions in conventional municipal wastewater treatment processes over the past decades. In this study, a self-sustaining synergetic microalgal-bacterial granular sludge process was thus developed to address these challenges. The results showed that the microalgal-bacterial granular sludge process was capable of removing 92.69%, 96.84% and 87.16% of influent organics, ammonia and phosphorus under non-aeration conditions over a short time of 6 h. The effluent could meet the increasingly stringent discharge standards in many countries worldwide. A tight synergetic interrelationship effect between microalgae and bacteria in granules was essential for such excellent process performance. The stoichiometric and functional genes analyses further revealed that most of organic matter and nutrients were removed through microalgal and bacterial assimilations. Moreover, it was found that there existed a desirable distribution of functional species of microalgae and bacteria in microalgal-bacterial granules, which appeared to be essential for the self-sustaining synergetic reactions and stability of microalgal-bacterial granules. Consequently, this work may offer a promising engineering alternative with great potential to achieve energy-efficient and environmentally sustainable municipal wastewater treatment.

How inoculation affects the development and the performances of microalgal-bacterial consortia treating real municipal wastewater

To date, little is known about the start-up of photobioreactors and the progressive development of stable microalgal-bacterial consortia with a view to the full-scale treatment of real wastewater. Two photo-sequencing bioreactors, one inoculated with Chlorella vulgaris (RC) and one with the absence of inoculum (RW), were fed with real municipal wastewater and run in parallel for 101 days. The influence of the inoculation was evaluated in terms of pollutant removal efficiency, excess sludge production, solids settleability and microbial community characteristics. No significant differences were observed in the removal of COD (89 ± 4%; 88 ± 3%) and ammonium (99 ± 1%; 99 ± 1%), mainly associated with bacteria activity. During the first weeks of acclimation, Chlorella vulgaris in RC promoted better P removal and very high variations of DO and pH. Conversely, under steady-state conditions, no significant differences were observed between the performances of RC and RW, showing good settleability and low effluent solids, 7 ± 8 and 13 ± 10 mg TSS/L respectively. Microbiome analysis via 16S rRNA gene sequencing showed that, despite a different evolution, the microbial community was quite similar in both reactors under steady state conditions. Overall, the results suggested that the inoculation of microalgae is not essential to engender a photobioreactor aimed at treating real municipal wastewater.

Microalgae cultivation and nutrients removal from sewage sludge after ozonizing in algal-bacteria system

The feasibility of growing algae in concentrated wastewater generated from sludge ozonation for simultaneous nutrients removal and biomass production was studied. The effects of bacteria addition into microalgae on nutrients removal, biomass yield and settleability, the growth rate of algae and concentrations of extracellular polymeric substances (EPS) and soluble microbial products (SMP) were investigated. The results showed that the growth rate of algae in algal-bacteria system (0.2182) was improved than in algae-only system (0.1852), while both of them are comparable with others reported previously. And the addition of bacteria enhanced COD, NH₄⁺-N, TN and TP removal rate by 23.9 ± 3.3%, 27.7 ± 3.6%, 16.6 ± 1.8% and 14.9 ± 2.2%, respectively. And 32.8 ± 0.7% of the TN and 50.3 ± 1.8% of the TP were recycled from ozonated sludge-supernatant (OSS) being absorbed into algal-bacterial biomass. The algal-bacteria system also demonstrated advantages on biomass settleability and heavy metals removal. Finally, the mechanism involving matter exchange and algal-bacteria system on OSS treatment in this study were discussed through evaluation of nutrients, SMP and EPS contents, nitrogen and phosphorus balance.