Thermal degradation and kinetics stability studies of oil palm (Elaeis Guineensis) biomass-derived lignin nanoparticle and its application as an emulsifying agent

Cytotoxicity Enhancement of α-Mangostin with Folate-Conjugated Chitosan Nanoparticles in MCF-7 Breast Cancer Cells

α-mangostin (AM) is a promising natural anticancer agent that can be used in cancer research. However, its effectiveness can be limited by poor solubility and bioavailability. To address this issue, chitosan-based nanoparticles (CSNPs) have been investigated as a potential delivery system to enhance the cytotoxicity to cancer cells and improve selectivity against normal cells. In this study, we developed folate-conjugated chitosan nanoparticles (F-CS-NPs) using a carbodiimide-based conjugation method to attach folate to chitosan (CS), which have different molecular weights. The NPs were crosslinked using tripolyphosphate (TPP) via ionic gelation. To characterize the F-CS-NPs, we utilized various analytical techniques, including transmission electron microscopy (TEM) to evaluate the particle size and morphology, Fourier-transform infrared spectroscopy (FTIR) to confirm the presence of functional groups, and ultraviolet-visible spectroscopy (UV-Vis) to measure the absorption spectrum and confirm the presence of folate. The particle size of AM-F-CS-NPs ranged from 180 nm to 250 nm, with many having favorable charges ranging from +40.33 ± 3.4 to 10.69 ± 1.3 mV. All NPs exhibited the same spherical morphology. The use of F-CS-NPs increased drug release, followed by a sustained release pattern. We evaluated the cytotoxicity of AM, AM-F-CS-HMW, and AM-F-CS-LMW NPs against MCF-7 cells and found IC50 values of 8.47 ± 0.49, 5.3 ± 0.01, and 4.70 ± 0.11 µg/mL, respectively. These results confirm the improved cytotoxicity of AM in MCF-7 cells when delivered via F-CS-NPs. Overall, our in vitro study demonstrated that the properties of F-CS-NPs greatly influence the cytotoxicity of AM in MCF-7 breast cancer cells (significantly different (p < 0.05)). The use of F-CS-NPs as a drug-delivery system for AM may have the potential to develop novel therapies for breast cancer.

Modification of Fabrication Process for Prolonged Nitrogen Release of Lignin-Montmorillonite Biocomposite Encapsulated Urea

Crop production faces challenges in achieving high fertilizer use efficiency. To address this issue, slow-release fertilizers (SRFs) have emerged as effective solutions to minimize nutrient losses caused by leaching, runoff, and volatilization. In addition, replacing petroleum-based synthetic polymers with biopolymers for SRFs offers substantial benefits in terms of sustainability of crop production and soil quality preservation, as biopolymers are biodegradable and environmentally friendly. This study focuses on modifying a fabrication process to develop a bio-composite comprising biowaste lignin and low-cost montmorillonite clay mineral for encapsulating urea to create a controllable release fertilizer (CRU) with a prolonged nitrogen release function. CRUs containing high N contents of 20 to 30 wt.% were successfully and extensively characterized using X-Ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and Scanning Electron Microscopy (SEM). The results showed that the releases of N from CRUs in water and soil extended to considerably long periods of 20 and 32 days, respectively. The significance of this research is the production of CRU beads that contain high N percentages and have a high soil residence period. These beads can enhance plant nitrogen utilization efficiency, reduce fertilizer consumption, and ultimately contribute to agricultural production.

Thermal stability of extracted lignin from novel millet husk crop residue

Recent alarming tones regarding the environment and energy crises have resulted in an emergent need for the utilization of bio-based materials. The current study aims to experimentally investigate the thermal kinetics and pyrolysis behavior of lignin extracted from novel barnyard millet husk (L-BMH) and finger millet husk (L-FMH) crop residue. The characterization techniques FTIR, SEM, XRD, and EDX were employed. TGA was performed to assess the thermal, pyrolysis, and kinetic behavior using Friedman kinetic model. The average lignin yield was obtained as 16.25 % (L-FMH) and 21.31 % (L-BMH). The average activation energy (E_a) was recorded as 179.91-227.67 kJ mol^-1 for L-FMH while 158.50-274.46 kJ mol^-1 for L-BMH in the conversion range of 0.2-0.8. The higher heating value (HHV) was found to be 19.80 ± 0.09 MJ kg^-1 (L-FMH) and 19.65 ± 0.03 MJ kg^-1 (L-BMH). The results create a possibility for the valorization of extracted lignin in polymer composites as potential bio-based flame retardant in polymer composites.

Lignin-Based Admixtures: A Scientometric Analysis and Qualitative Discussion Applied to Cement-Based Composites

The development of lignin-based admixtures (LBAs) for cement-based composites is an alternative to valorizing residual lignins generated in biorefineries and pulp and paper mills. Consequently, LBAs have become an emerging research domain in the past decade. This study examined the bibliographic data on LBAs through a scientometric analysis and in-depth qualitative discussion. For this purpose, 161 articles were selected for the scientometric approach. After analyzing the articles' abstracts, 37 papers on developing new LBAs were selected and critically reviewed. Significant publication sources, frequent keywords, influential scholars, and contributing countries in LBAs research were identified during the science mapping. The LBAs developed so far were classified as plasticizers, superplasticizers, set retarders, grinding aids, and air-entraining admixtures. The qualitative discussion revealed that most studies have focused on developing LBAs using Kraft lignins from pulp and paper mills. Thus, residual lignins from biorefineries need more attention since their valorization is a relevant strategy for emerging economies with high biomass availability. Most studies focused on production processes, chemical characterizations, and primary fresh-state analyses of LBA-containing cement-based composites. However, to better assess the feasibility of using different LBAs and encompass the multidisciplinarity of this subject, it is mandatory that future studies also evaluate hardened-sate properties. This holistic review offers a helpful reference point to early-stage researchers, industry professionals, and funding authorities on the research progress in LBAs. It also contributes to understanding the role of lignin in sustainable construction.

Directional-Freezing-Assisted In Situ Sol-Gel Strategy to Synthesize High-Strength, Fire-Resistant, and Hydrophobic Wood-Based Composite Aerogels for Thermal Insulation

The undesirable inherent natural characteristics of wood, such as low mechanical strength, flammability, and hygroscopicity, limit its potential applications in the thermal insulation industry. Overcoming these disadvantages can greatly expand the application scope of wood. A new attempt at wood modification, the directional-freezing-assisted in situ sol-gel strategy, was used to obtain wood-silica composite aerogels with the unique multi-level ordered porous structure of wood. This method enables silica nanoparticles to successfully replace lignin and facilitates the formation of strong hydrogen bonds between the silica and cellulose molecules. This results in improved mechanical properties for the composite with a density similar to that of natural wood but a mechanical strength that can be up to five times greater. The thermal conductivity coefficient is also reduced to 0.032 W (m·K)^-1 compared to 0.066 W (m·K)^-1 for natural wood. This aerogel composite exhibits improved fire resistance and hygroscopicity, with a decomposition temperature increase of approximately 45 °C compared to natural wood. Additionally, the composite demonstrates self-extinguishing behavior, with the structure remaining intact after combustion, and thus enhanced fire resistance. Simultaneously, the enhanced aerogel composite hydrophobicity, with water contact angle of up to 120°, is beneficial to a prominent thermal insulation performance in a high-humidity environment. The successful synthesis of wood-based composite aerogels provides a new and innovative approach for the utilization of wood resources in the thermal insulation industry.

Research and Application of Biomass-Based Wood Flame Retardants: A Review

Wood is widely used as a construction material due to its many advantages, such as good mechanical properties, low production costs, and renewability. However, its flammability limits its use in construction. To solve the problem of wood flammability, the most common method to improve the fire safety of wood is to modify the wood by deep impregnation or surface coating with flame retardants. Therefore, many researchers have found that environmentally friendly and low-cost biomass materials can be used as a source of green flame retardants. Two aspects of biomass-based intumescent flame retardants are summarized in this paper. On the one hand, biomass is used as one of the three sources or as a flame-retardant synergist in combination with other flame retardants, which are called composite biomass intumescent flame retardants. On the other hand, biomass is used alone as a feedstock to produce all-biomass intumescent flame retardants. In addition, the potential of biomass-based materials as an environmentally friendly and low-cost FR source to produce high-performance biomass-based flame retardants with improved technology was also discussed in detail. The development of biomass-based intumescent flame retardants represents a viable and promising approach for the efficient and environmentally friendly production of biomass-based flame retardants.

Sustainable valorization of water hyacinth waste pollutant via pyrolysis for advance microbial fuel investigation

Present study has been focused on the bio-energy potential of waste biomass (water hyacinth leaves and its stem). Pyrolysis of both biomasses were investigated at five different heating rates (5-25 ^°C/min) using thermogravimetric analyzer. For both biomasses, maximum thermal degradation occurred within the temperature range of 200-400 °C, which is the active pyrolytic zone. Three non-iso-conversional (degradation models) including the Kissinger-Akahira-Sunose, Flynn-Wall-Ozawa, and Starink were used to calculate the activation energy of both biomasses. The activation energy was around 92-98 kJ/mol for water hyacinth leaves and 151-153 kJ/mol for water hyacinth stems. The results suggest that these low-cost abundantly available biomasses have a good potential for the production of solid bio-fuel.

Lignocellulosics in plant cell wall and their potential biological degradation

Lignocellulosic materials are composed of three main structural polymers: hemicellulose, cellulose, and lignin. Cellulose is a long chain molecule of glucose requiring a small number of enzymes for degradation due to its simple structure while lignin is a complex polymer of phenylpropane making its biochemical decomposition difficult. Under anaerobic conditions, lignocellulose breakdown is much easier and more rapid than aerobic conditions. Various studies have been carried out to estimate the rate of degradation of lignocellulosic materials. Microorganisms play a key role in the degradation of lignocellulosic materials because they produce a variety of hydrolytic enzymes including cellulase, proteases, xylanases, lipases, laccase, and phosphatases during the degradation of lignocellulosic materials. Based on the body of literature, microorganismal activity can provide useful information about the process of organic matter decomposition.

Thermo-chemical potential of solid waste seed biomass obtained from plant Phoenix dactylifera and Aegle marmelos L. Fruit core cell

The present study explores thermo-chemical potential of two biomasses namely; Phoenix dactylifera seed (PDS) and Aegle marmelos L core (AMP). These biomasses contain high amount of cellulose and exhibit heating value of 3-18 MJ/kg. The thermal kinetic of both the biomasses have been extensively studied using thermogravimetric analysis (TGA) at four different heating rates 5, 10, 15, and 20 °C/min. Kinetic analysis was carried out using three model-free techniques including Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS) and Starink. The average activation energy has been found to be 173.75, 172.94 and 170.71 kJ/mol, for PDS whereas 170.26, 167.24 and 164.80 kJ/mol, for AMP analyzed through KAS, FWO and Starink methods, respectively. Further, among all these models, the Starink model exhibits better result for the biofuels potential point of view.

A recent advancement on preparation, characterization and application of nanolignin

Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community. The objective of this review is to provide a complete understanding and knowledge of the synthesis methods and functionalization of various lignin nanoparticles (LNP). The characterization of LNP such as structural, thermal, molecular weight properties together with macromolecule and quantification assessments are also reviewed. In particular, emerging applications in different areas such as UV barriers, antimicrobials, drug administration, agriculture, anticorrosives, the environment, wood protection, enzymatic immobilization and others were highlighted. In addition, future perspectives and challenges related to the development of LNP are discussed.

Utilization of lignocellulosic biomass: A practical journey towards the development of emulsifying agent

With each passing year, the agriculture and wood processing industries generate increasingly high tonnages of biomass waste, which instead of being burned or left to accumulate should be utilized more sustainably. In parallel, advances in green technology have encouraged large companies and nations to begin using eco-friendly materials, including eco-friendly emulsifiers, which are used in various industries and in bio-based materials. The emulsion-conducive properties of lignocellulosic materials such as cellulose, hemicellulose, and lignin, the building blocks of plant and wood structures, have demonstrated a particular ability to alter the landscape of emulsion technology. Beyond that, the further modification of their structure may improve emulsion stability, which often determines the performance of emulsions. Considering those trends, this review examines the performance of lignocellulosic materials after modification according to their stability, droplet size, and distribution by size, all of which suggest their outstanding potential as materials for emulsifying agents.

Esterification of Lignin Isolated by Deep Eutectic Solvent Using Fatty Acid Chloride, and Its Composite Film with Poly(lactic acid)

In this study, the effect of lignin esterification with fatty acid chloride on the properties of lignin and lignin/poly(lactic acid) (PLA) composites was investigated. Lignocellulose (Pinus densiflora S. et Z.) was treated using a deep eutectic solvent (DES) with choline chloride (ChCl)/lactic acid (LA). From the DES-soluble fraction, DES-lignin (DL) was isolated by a regeneration process. Lignin esterification was conducted with palmitoyl chloride (PC). As the PC loading increased for DL esterification, the Mw of esterified DL (EDL) was increased, and the glass transition temperature (T_g) was decreased. In DL or EDL/PLA composite films, it was observed that EDL/PLA had cleaner and smoother morphological characteristics than DL/PLA. The addition of DL or EDL in a PLA matrix resulted in a deterioration of tensile properties as compared with neat PLA. The EDL/PLA composite film had a higher tensile strength and elastic modulus than the DL/PLA composite film. DL esterification decreased water absorption with lower water diffusion coefficients. The effect of lignin esterification on improving the compatibility of lignin and PLA was demonstrated. These results are expected to contribute to the development of high-strength lignin composites.