Lipid-binding surfaces of membrane proteins: evidence from evolutionary and structural analysis

Biochemical characterization and mutational analysis of lysophosphatidic acid acyltransferases of Escherichia coli highlighting their involvement in the generation of membrane phospholipid diversity

Lysophosphatidic acid acyltransferase (LPAAT) is an enzyme responsible for the second acylation step of phospholipid biosynthesis and transforms lysophosphatidic acid to phosphatidic acid, a universal precursor of various phospholipids. In addition to the well-studied plsC-encoded LPAAT (EcPlsC), we previously found that Escherichia coli has another LPAAT that is encoded by yihG (EcYihG). EcPlsC and EcYihG are integral membrane proteins and have never been solubilized and purified in their active form. To better understand the difference in their enzymatic functions and how the two paralogs differently contribute to lipid diversity, we established a method to purify both enzymes in their active form and comparatively analysed their biochemical characteristics. Our findings illustrate that EcPlsC possesses the highest activity at pH 8.0 and 37°C with selectivity for unsaturated fatty acyl-CoAs (e.g. palmitoleoyl-CoA), whereas EcYihG works optimally at pH 7.5 and 30°C and prefers saturated fatty acyl-CoAs (e.g. myristoyl-CoA). In addition, we performed a mutational analysis based on AlphaFold2 models and revealed that one residue, which is located at the putative acyl-donor-selectivity tunnel entrance, plays a pivotal role in selecting acyl donor substrates. This provides new insights into how LPAATs recognize specific fatty acyl groups and incorporate them into membrane phospholipids.

In vitro evolution driven by epistasis reveals alternative cholesterol-specific binding motifs of perfringolysin O

The crucial molecular factors that shape the interfaces of lipid-binding proteins with their target ligands and surfaces remain unknown due to the complex makeup of biological membranes. Cholesterol, the major modulator of bilayer structure in mammalian cell membranes, is recognized by various proteins, including the well-studied cholesterol-dependent cytolysins. Here, we use in vitro evolution to investigate the molecular adaptations that preserve the cholesterol specificity of perfringolysin O, the prototypical cholesterol-dependent cytolysin from Clostridium perfringens. We identify variants with altered membrane-binding interfaces whose cholesterol-specific activity exceeds that of the wild-type perfringolysin O. These novel variants represent alternative evolutionary outcomes and have mutations at conserved positions that can only accumulate when epistatic constraints are alleviated. Our results improve the current understanding of the biochemical malleability of the surface of a lipid-binding protein.

Current achievements, strategies, obstacles, and overcoming the challenges of the protein engineering in Pichia pastoris expression system

Yeasts serve as exceptional hosts in the manufacturing of functional protein engineering and possess industrial or medical utilities. Considerable focus has been directed towards yeast owing to its inherent benefits and recent advancements in this particular cellular host. The Pichia pastoris expression system is widely recognized as a prominent and widely accepted instrument in molecular biology for the purpose of generating recombinant proteins. The advantages of utilizing the P. pastoris system for protein production encompass the proper folding process occurring within the endoplasmic reticulum (ER), as well as the subsequent secretion mediated by Kex2 as a signal peptidase, ultimately leading to the release of recombinant proteins into the extracellular environment of the cell. In addition, within the P. pastoris expression system, the ease of purifying recombinant protein arises from its restricted synthesis of endogenous secretory proteins. Despite its achievements, scientists often encounter persistent challenges when attempting to utilize yeast for the production of recombinant proteins. This review is dedicated to discussing the current achievements in the usage of P. pastoris as an expression host. Furthermore, it sheds light on the strategies employed in the expression system and the optimization and development of the fermentative process of this yeast. Finally, the impediments (such as identifying high expression strains, improving secretion efficiency, and decreasing hyperglycosylation) and successful resolution of certain difficulties are put forth and deliberated upon in order to assist and promote the expression of complex proteins in this prevalent recombinant host.

Cholesterol in Class C GPCRs: Role, Relevance, and Localization

G-protein coupled receptors (GPCRs), one of the largest superfamilies of cell-surface receptors, are heptahelical integral membrane proteins that play critical roles in virtually every organ system. G-protein-coupled receptors operate in membranes rich in cholesterol, with an imbalance in cholesterol level within the vicinity of GPCR transmembrane domains affecting the structure and/or function of many GPCRs, a phenomenon that has been linked to several diseases. These effects of cholesterol could result in indirect changes by altering the mechanical properties of the lipid environment or direct changes by binding to specific sites on the protein. There are a number of studies and reviews on how cholesterol modulates class A GPCRs; however, this area of study is yet to be explored for class C GPCRs, which are characterized by a large extracellular region and often form constitutive dimers. This review highlights specific sites of interaction, functions, and structural dynamics involved in the cholesterol recognition of the class C GPCRs. We summarize recent data from some typical family members to explain the effects of membrane cholesterol on the structural features and functions of class C GPCRs and speculate on their corresponding therapeutic potential.

Docking cholesterol to integral membrane proteins with Rosetta

Lipid molecules such as cholesterol interact with the surface of integral membrane proteins (IMP) in a mode different from drug-like molecules in a protein binding pocket. These differences are due to the lipid molecule's shape, the membrane's hydrophobic environment, and the lipid's orientation in the membrane. We can use the recent increase in experimental structures in complex with cholesterol to understand protein-cholesterol interactions. We developed the RosettaCholesterol protocol consisting of (1) a prediction phase using an energy grid to sample and score native-like binding poses and (2) a specificity filter to calculate the likelihood that a cholesterol interaction site may be specific. We used a multi-pronged benchmark (self-dock, flip-dock, cross-dock, and global-dock) of protein-cholesterol complexes to validate our method. RosettaCholesterol improved sampling and scoring of native poses over the standard RosettaLigand baseline method in 91% of cases and performs better regardless of benchmark complexity. On the β2AR, our method found one likely-specific site, which is described in the literature. The RosettaCholesterol protocol quantifies cholesterol binding site specificity. Our approach provides a starting point for high-throughput modeling and prediction of cholesterol binding sites for further experimental validation.

Cholesterol Dependent Activity of the Adenosine A2A Receptor Is Modulated via the Cholesterol Consensus Motif

BACKGROUND

Membrane cholesterol dysregulation has been shown to alter the activity of the adenosine A_2A receptor (A_2AR), a G protein-coupled receptor, thereby implicating cholesterol levels in diseases such as Alzheimer's and Parkinson's. A limited number of A_2AR crystal structures show the receptor interacting with cholesterol, as such molecular simulations are often used to predict cholesterol interaction sites.

METHODS

Here, we use experimental methods to determine whether a specific interaction between amino acid side chains in the cholesterol consensus motif (CCM) of full length, wild-type human A_2AR, and cholesterol modulates activity of the receptor by testing the effects of mutational changes on functional consequences, including ligand binding, G protein coupling, and downstream activation of cyclic AMP.

RESULTS AND CONCLUSIONS

Our data, taken with previously published studies, support a model of receptor state-dependent binding between cholesterol and the CCM, whereby cholesterol facilitates both G protein coupling and downstream signaling of A_2AR.

The structure of the TOM core complex in the mitochondrial outer membrane

In the past three decades, significant advances have been made in providing the biochemical background of TOM (translocase of the outer mitochondrial membrane)-mediated protein translocation into mitochondria. In the light of recent cryoelectron microscopy-derived structures of TOM isolated from Neurospora crassa and Saccharomyces cerevisiae, the interpretation of biochemical and biophysical studies of TOM-mediated protein transport into mitochondria now rests on a solid basis. In this review, we compare the subnanometer structure of N. crassa TOM core complex with that of yeast. Both structures reveal remarkably well-conserved symmetrical dimers of 10 membrane protein subunits. The structural data also validate predictions of weakly stable regions in the transmembrane β-barrel domains of the protein-conducting subunit Tom40, which signal the existence of β-strands located in interfaces of protein-protein interactions.

Overview on solubilization and lipid reconstitution of Na,K-ATPase: enzyme kinetic and biophysical characterization

Na,K-ATPase is a membrane protein which plays a vital role. It pumps Na⁺ and K⁺ ions across the cellular membranes using energy from ATP hydrolysis, and is responsible for maintaining the osmotic equilibrium and generating the membrane potential. Moreover, Na,K-ATPase has also been involved in cell signaling, interacting with partner proteins. Cardiotonic steroids bind specifically to Na,K-ATPase triggering a number of signaling pathways. Because of its importance, many efforts have been employed to study the structure and function of this protein. Difficulties associated with its removal from natural membranes and the concomitant search for appropriate replacement conditions to keep the protein in solution have presented a challenge that had to be overcome prior to carrying out biophysical and biochemical studies in vitro. In this review, we summarized all of the methods and techniques applied by our group in order to obtain information about Na,K-ATPase in respect to solubilization, reconstitution into mimetic system, influence of lipid composition, stability, oligomerization, and aggregation.

Membrane Protein Production in Yeast: Modification of Yeast Membranes for Human Membrane Protein Production

Approximately 30% of the genes in the human genome code for membrane proteins, and yet we know relatively little about these complex molecules. Therefore, the biochemical and structural characterization of this challenging class of proteins represents an important frontier in both fundamental research and advances in drug discovery. However, due to their unique physical properties and requirement for association with cellular membranes, expression in heterologous systems is often daunting. In this chapter we describe how to engineer the yeast Pichia pastoris to obtain humanized sterol compositions. By implementing some simple genetic engineering approaches, P. pastoris can be reprogrammed to mainly produce cholesterol instead of ergosterol. We show how to apply mass spectrometry to confirm the production of cholesterol instead of ergosterol and how we have further analyzed the strain by electron microscopy. Finally, we delineate how to apply and test the cholesterol-forming P. pastoris strain for functional expression of mammalian Na,K-ATPase α3β1 isoform. Na,K-ATPases have been shown to specifically interact with cholesterol and phospholipids, and, obviously, the presence of cholesterol instead of ergosterol was the key to stabilizing correct localization and activity of this ion transporter.

Role of cardiolipin in stability of integral membrane proteins

Cardiolipin (CL) is a unique phospholipid with a dimeric structure having four acyl chains and two phosphate groups found almost exclusively in certain membranes of bacteria and of mitochondria of eukaryotes. CL interacts with numerous proteins and has been implicated in function and stabilization of several integral membrane proteins (IMPs). While both functional and stabilization roles of CL in IMPs has been generally acknowledged, there are, in fact, only limited number of quantitative analysis that support this function of CL. This is likely caused by relatively complex determination of parameters characterizing stability of IMPs and particularly intricate assessment of role of specific phospholipids such as CL in IMPs stability. This review aims to summarize quantitative findings regarding stabilization role of CL in IMPs reported up to now.

Lipid perturbation by membrane proteins and the lipophobic effect

Understanding how membrane proteins interact with their environment is fundamental to the understanding of their structure, function and interactions. We have performed coarse-grained molecular dynamics simulations on a series of membrane proteins in a membrane environment to examine the perturbations of the lipids by the presence of protein. We analyze these perturbations in terms of elastic membrane deformations and local lipid protein interactions. However these two factors are insufficient to describe the variety of effects that we observe and the changes caused by membranes proteins to the structure and dynamics of their lipid environment. Other factors that change the conformation available to lipid molecules are evident and are able to modify lipid structure far from the protein surface, and thus mediate long-range interactions between membrane proteins. We suggest that these multiple modifications to lipid behavior are responsible, at the molecular level, for the lipophobic effect we have proposed to account for our observations of membrane protein organization.

CLD1 Reverses the Ubiquinone Insufficiency of Mutant cat5/coq7 in a Saccharomyces cerevisiae Model System

Ubiquinone (Q_n) functions as a mobile electron carrier in mitochondria. In humans, Q biosynthetic pathway mutations lead to Q₁₀ deficiency, a life threatening disorder. We have used a Saccharomyces cerevisiae model of Q₆ deficiency to screen for new modulators of ubiquinone biosynthesis. We generated several hypomorphic alleles of coq7/cat5 (clk-1 in Caenorhabditis elegans) encoding the penultimate enzyme in Q biosynthesis which converts 5-demethoxy Q₆ (DMQ₆) to 5-demethyl Q₆, and screened for genes that, when overexpressed, suppressed their inability to grow on non-fermentable ethanol—implying recovery of lost mitochondrial function. Through this approach we identified Cardiolipin-specific Deacylase 1 (CLD1), a gene encoding a phospholipase A₂ required for cardiolipin acyl remodeling. Interestingly, not all coq7 mutants were suppressed by Cld1p overexpression, and molecular modeling of the mutant Coq7p proteins that were suppressed showed they all contained disruptions in a hydrophobic α-helix that is predicted to mediate membrane-binding. CLD1 overexpression in the suppressible coq7 mutants restored the ratio of DMQ₆ to Q₆ toward wild type levels, suggesting recovery of lost Coq7p function. Identification of a spontaneous Cld1p loss-of-function mutation illustrated that Cld1p activity was required for coq7 suppression. This observation was further supported by HPLC-ESI-MS/MS profiling of monolysocardiolipin, the product of Cld1p. In summary, our results present a novel example of a lipid remodeling enzyme reversing a mitochondrial ubiquinone insufficiency by facilitating recovery of hypomorphic enzymatic function.

In Silico Structure and Sequence Analysis of Bacterial Porins and Specific Diffusion Channels for Hydrophilic Molecules: Conservation, Multimericity and Multifunctionality

Diffusion channels are involved in the selective uptake of nutrients and form the largest outer membrane protein (OMP) family in Gram-negative bacteria. Differences in pore size and amino acid composition contribute to the specificity. Structure-based multiple sequence alignments shed light on the structure-function relations for all eight subclasses. Entropy-variability analysis results are correlated to known structural and functional aspects, such as structural integrity, multimericity, specificity and biological niche adaptation. The high mutation rate in their surface-exposed loops is likely an important mechanism for host immune system evasion. Multiple sequence alignments for each subclass revealed conserved residue positions that are involved in substrate recognition and specificity. An analysis of monomeric protein channels revealed particular sequence patterns of amino acids that were observed in other classes at multimeric interfaces. This adds to the emerging evidence that all members of the family exist in a multimeric state. Our findings are important for understanding the role of members of this family in a wide range of bacterial processes, including bacterial food uptake, survival and adaptation mechanisms.

Active membrane cholesterol as a physiological effector

Sterols associate preferentially with plasma membrane sphingolipids and saturated phospholipids to form stoichiometric complexes. Cholesterol in molar excess of the capacity of these polar bilayer lipids has a high accessibility and fugacity; we call this fraction active cholesterol. This review first considers how active cholesterol serves as an upstream regulator of cellular sterol homeostasis. The mechanism appears to utilize the redistribution of active cholesterol down its diffusional gradient to the endoplasmic reticulum and mitochondria, where it binds multiple effectors and directs their feedback activity. We have also reviewed a broad literature in search of a role for active cholesterol (as opposed to bulk cholesterol or lipid domains such as rafts) in the activity of diverse membrane proteins. Several systems provide such evidence, implicating, in particular, caveolin-1, various kinds of ABC-type cholesterol transporters, solute transporters, receptors and ion channels. We suggest that this larger role for active cholesterol warrants close attention and can be tested easily.

Effect of high-fat diet on cholesterol metabolism in rats and its association with Na⁺/K⁺-ATPase/Src/pERK signaling pathway

Abnormal cholesterol metabolism is associated with an elevated risk of developing atherosclerosis, hypertension, and diabetes etc. Na(+)/K(+)-ATPase was found to regulate cholesterol synthesis, distribution and trafficking. This study aimed to examine the effect of high-fat diet on cholesterol metabolism in rats and the role of Na(+)/K(+)-ATPase/Src/ERK signaling pathway in the process. Forty male SD rats were evenly divided into high-fat diet group and control group at random. Animals in the former group were fed on high-fat diet for 12 weeks, and those fed on basic diet served as control. Blood lipids, including total cholesterol (TC), triglyceride (TG), high density lipoprotein-cholesterol (HDL-C), and low density lipoprotein-cholesteral (LDL-C) levels, were detected at 3, 6 and 12 weeks. The ratio of cholesterol content in cytoplasm to that in cell membrane was detected in liver tissues. RT-PCR and Western blotting were used to measure the expression of lipid metabolism-associated genes (HMG-CoA reductase and SREBP-2) after 12-week high-fat diet. Na(+)/K(+)-ATPase/Src/ERK signaling pathway-related components (Na(+)/K(+)-ATPase α1, Src-PY418 and pERK1/2) were also measured by Western blotting. The results showed that the serum TC, TG, and LDL-C levels were significantly higher in high-fat diet group than those in control group, while the HDL-C level was significantly lower in high-fat diet group at 6 weeks (P<0.01). High-fat diet led to an increase in the cholesterol content in the cytoplasm and cell membrane. The ratio of cholesterol content in cytoplasm to that in cell membrane was elevated over time. The expression of HMG-CoA reductase and SREBP-2 was significantly suppressed at mRNA and protein levels after 12-week high-fat diet (P<0.05). Moreover, high-fat diet promoted the expression of Na(+)/K(+)-ATPase α1 but suppressed the phosphorylation of Src-PY418 and ERK1/2 at 12 weeks (P<0.05). It was concluded that high-fat diet regulates cholesterol metabolism, and Na(+)/K(+)-ATPase signaling pathway is involved in the process possibly by regulating the expression of lipid metabolism-associated proteins HMG-CoA reductase and SREBP-2.

CH-π hydrogen bonds in biological macromolecules

This is a sequel to the previous Perspective "The CH-π hydrogen bond in chemistry. Conformation, supramolecules, optical resolution and interactions involving carbohydrates", which featured in a PCCP themed issue on "Weak Hydrogen Bonds - Strong Effects?": Phys. Chem. Chem. Phys., 2011, 13, 13873-13900. Evidence that weak hydrogen bonds play an enormously important role in chemistry and biochemistry has now accumulated to an extent that the rigid classical concept of hydrogen bonds formulated by Pauling needs to be seriously revised and extended. The concept of a more generalized hydrogen bond definition is indispensable for understanding the folding mechanisms of proteins. The CH-π hydrogen bond, a weak molecular force occurring between a soft acid CH and a soft base π-electron system, among all is one of the most important and plays a functional role in defining the conformation and stability of 3D structures as well as in many molecular recognition events. This concept is also valuable in structure-based drug design efforts. Despite their frequent occurrence in organic molecules and bio-molecules, the importance of CH-π hydrogen bonds is still largely unknown to many chemists and biochemists. Here we present a review that deals with the evidence, nature, characteristics and consequences of the CH-π hydrogen bond in biological macromolecules (proteins, nucleic acids, lipids and polysaccharides). It is hoped that the present Perspective will show the importance of CH-π hydrogen bonds and stimulate interest in the interactions of biological macromolecules, one of the most fascinating fields in bioorganic chemistry. Implication of this concept is enormous and valuable in the scientific community.

CholMine: Determinants and Prediction of Cholesterol and Cholate Binding Across Nonhomologous Protein Structures

Identifying physiological ligands is necessary for annotating new protein structures, yet this presents a significant challenge to biologists and pharmaceutical chemists. Here we develop a predictor of cholesterol and cholate binding that works across diverse protein families, extending beyond sequence motif-based prediction. This approach combines SimSite3D site comparison with the detection of conserved interactions in cholesterol/cholate bound crystal structures to define three-dimensional interaction motifs. The resulting predictor identifies cholesterol sites with an ∼82% unbiased true positive rate in both membrane and soluble proteins, with a very low false positive rate relative to other predictors. The CholMine Web server can analyze users' structures, detect those likely to bind cholesterol/cholate, and predict the binding mode and key interactions. By deciphering the determinants of binding for these important steroids, CholMine may also aid in the design of selective inhibitors and detergents for targets such as G protein coupled receptors and bile acid receptors.

Modulation of plasma membrane Ca2+-ATPase by neutral phospholipids: effect of the micelle-vesicle transition and the bilayer thickness

The effects of lipids on membrane proteins are likely to be complex and unique for each membrane protein. Here we studied different detergent/phosphatidylcholine reconstitution media and tested their effects on plasma membrane Ca(2+) pump (PMCA). We found that Ca(2+)-ATPase activity shows a biphasic behavior with respect to the detergent/phosphatidylcholine ratio. Moreover, the maximal Ca(2+)-ATPase activity largely depends on the length and the unsaturation degree of the hydrocarbon chain. Using static light scattering and fluorescence correlation spectroscopy, we monitored the changes in hydrodynamic radius of detergent/phosphatidylcholine particles during the micelle-vesicle transition. We found that, when PMCA is reconstituted in mixed micelles, neutral phospholipids increase the enzyme turnover. The biophysical changes associated with the transition from mixed micelles to bicelles increase the time of residence of the phosphorylated intermediate (EP), decreasing the enzyme turnover. Molecular dynamics simulations analysis of the interactions between PMCA and the phospholipid bilayer in which it is embedded show that in the 1,2-dioleoyl-sn-glycero-3-phosphocholine bilayer, charged residues of the protein are trapped in the hydrophobic core. Conversely, in the 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer, the overall hydrophobic-hydrophilic requirements of the protein surface are fulfilled the best, reducing the thermodynamic cost of exposing charged residues to the hydrophobic core. The apparent mismatch produced by a 1,2-dioleoyl-sn-glycero-3-phosphocholine thicker bilayer could be a structural foundation to explain its functional effect on PMCA.

Computational modeling of membrane proteins

The determination of membrane protein (MP) structures has always trailed that of soluble proteins due to difficulties in their overexpression, reconstitution into membrane mimetics, and subsequent structure determination. The percentage of MP structures in the protein databank (PDB) has been at a constant 1-2% for the last decade. In contrast, over half of all drugs target MPs, only highlighting how little we understand about drug-specific effects in the human body. To reduce this gap, researchers have attempted to predict structural features of MPs even before the first structure was experimentally elucidated. In this review, we present current computational methods to predict MP structure, starting with secondary structure prediction, prediction of trans-membrane spans, and topology. Even though these methods generate reliable predictions, challenges such as predicting kinks or precise beginnings and ends of secondary structure elements are still waiting to be addressed. We describe recent developments in the prediction of 3D structures of both α-helical MPs as well as β-barrels using comparative modeling techniques, de novo methods, and molecular dynamics (MD) simulations. The increase of MP structures has (1) facilitated comparative modeling due to availability of more and better templates, and (2) improved the statistics for knowledge-based scoring functions. Moreover, de novo methods have benefited from the use of correlated mutations as restraints. Finally, we outline current advances that will likely shape the field in the forthcoming decade.

Stimulation, inhibition, or stabilization of Na,K-ATPase caused by specific lipid interactions at distinct sites

The activity of membrane proteins such as Na,K-ATPase depends strongly on the surrounding lipid environment. Interactions can be annular, depending on the physical properties of the membrane, or specific with lipids bound in pockets between transmembrane domains. This paper describes three specific lipid-protein interactions using purified recombinant Na,K-ATPase. (a) Thermal stability of the Na,K-ATPase depends crucially on a specific interaction with 18:0/18:1 phosphatidylserine (1-stearoyl-2-oleoyl-sn-glycero-3-phospho-L-serine; SOPS) and cholesterol, which strongly amplifies stabilization. We show here that cholesterol associates with SOPS, FXYD1, and the α subunit between trans-membrane segments αTM8 and -10 to stabilize the protein. (b) Polyunsaturated neutral lipids stimulate Na,K-ATPase turnover by >60%. A screen of the lipid specificity showed that 18:0/20:4 and 18:0/22:6 phosphatidylethanolamine (PE) are the optimal phospholipids for this effect. (c) Saturated phosphatidylcholine and sphingomyelin, but not saturated phosphatidylserine or PE, inhibit Na,K-ATPase activity by 70-80%. This effect depends strongly on the presence of cholesterol. Analysis of the Na,K-ATPase activity and E1-E2 conformational transitions reveals the kinetic mechanisms of these effects. Both stimulatory and inhibitory lipids poise the conformational equilibrium toward E2, but their detailed mechanisms of action are different. PE accelerates the rate of E1 → E2P but does not affect E2(2K)ATP → E13NaATP, whereas sphingomyelin inhibits the rate of E2(2K)ATP → E13NaATP, with very little effect on E1 → E2P. We discuss these lipid effects in relation to recent crystal structures of Na,K-ATPase and propose that there are three separate sites for the specific lipid interactions, with potential physiological roles to regulate activity and stability of the pump.

Structural and functional assessment of perilipin 2 lipid binding domain(s)

Although perilipin 2 (Plin2) has been shown to bind lipids with high affinity, the Plin2 lipid binding site has yet to be defined. This is of interest since Plin2's affinity for lipids has been suggested to be important for lipid droplet biogenesis and intracellular triacylglycerol accumulation. To define these regions, mouse Plin2 and several deletion mutants expressed as recombinant proteins and in mammalian cells were assessed by molecular modeling, fluorescence binding, circular dichroic, and fluorescence resonance energy transfer techniques to identify the structural and functional requirements for lipid binding. Major findings of this study indicate (1) the N-terminal PAT domain does not bind cholesterol or stearic acid; (2) Plin2 residues 119-251, containing helix α4, the α-β domain, and part of helix α6 form a Plin3-like cleft found to be important for highest affinity lipid binding; (3) both stearic acid and cholesterol interact favorably with the Plin2 cleft formed by conserved residues in helix α6 and adjacent strands, which is common to all the active lipid-binding constructs; and (4) discrete targeting of the Plin2 mutants to lipid droplets supports Plin2 containing two independent, nonoverlapping lipid droplet targeting domains in its central and C-terminal sequences. Thus, the current work reveals specific domains responsible for Plin2-lipid interactions that involves the protein's lipid binding and targeting functions.

Folding and stability of integral membrane proteins in amphipols

Amphipols (APols) are a family of amphipathic polymers designed to keep transmembrane proteins (TMPs) soluble in aqueous solutions in the absence of detergent. APols have proven remarkably efficient at (i) stabilizing TMPs, as compared to detergent solutions, and (ii) folding them from a denatured state to a native, functional one. The underlying physical-chemical mechanisms are discussed.

Overexpression of membrane proteins from higher eukaryotes in yeasts

Heterologous expression and characterisation of the membrane proteins of higher eukaryotes is of paramount interest in fundamental and applied research. Due to the rather simple and well-established methods for their genetic modification and cultivation, yeast cells are attractive host systems for recombinant protein production. This review provides an overview on the remarkable progress, and discusses pitfalls, in applying various yeast host strains for high-level expression of eukaryotic membrane proteins. In contrast to the cell lines of higher eukaryotes, yeasts permit efficient library screening methods. Modified yeasts are used as high-throughput screening tools for heterologous membrane protein functions or as benchmark for analysing drug-target relationships, e.g., by using yeasts as sensors. Furthermore, yeasts are powerful hosts for revealing interactions stabilising and/or activating membrane proteins. We also discuss the stress responses of yeasts upon heterologous expression of membrane proteins. Through co-expression of chaperones and/or optimising yeast cultivation and expression strategies, yield-optimised hosts have been created for membrane protein crystallography or efficient whole-cell production of fine chemicals.

Life at the border: adaptation of proteins to anisotropic membrane environment

This review discusses main features of transmembrane (TM) proteins which distinguish them from water-soluble proteins and allow their adaptation to the anisotropic membrane environment. We overview the structural limitations on membrane protein architecture, spatial arrangement of proteins in membranes and their intrinsic hydrophobic thickness, co-translational and post-translational folding and insertion into lipid bilayers, topogenesis, high propensity to form oligomers, and large-scale conformational transitions during membrane insertion and transport function. Special attention is paid to the polarity of TM protein surfaces described by profiles of dipolarity/polarizability and hydrogen-bonding capacity parameters that match polarity of the lipid environment. Analysis of distributions of Trp resides on surfaces of TM proteins from different biological membranes indicates that interfacial membrane regions with preferential accumulation of Trp indole rings correspond to the outer part of the lipid acyl chain region-between double bonds and carbonyl groups of lipids. These "midpolar" regions are not always symmetric in proteins from natural membranes. We also examined the hydrophobic effect that drives insertion of proteins into lipid bilayer and different free energy contributions to TM protein stability, including attractive van der Waals forces and hydrogen bonds, side-chain conformational entropy, the hydrophobic mismatch, membrane deformations, and specific protein-lipid binding.

Protein expression in Pichia pastoris: recent achievements and perspectives for heterologous protein production

Pichia pastoris is an established protein expression host mainly applied for the production of biopharmaceuticals and industrial enzymes. This methylotrophic yeast is a distinguished production system for its growth to very high cell densities, for the available strong and tightly regulated promoters, and for the options to produce gram amounts of recombinant protein per litre of culture both intracellularly and in secretory fashion. However, not every protein of interest is produced in or secreted by P. pastoris to such high titres. Frequently, protein yields are clearly lower, particularly if complex proteins are expressed that are hetero-oligomers, membrane-attached or prone to proteolytic degradation. The last few years have been particularly fruitful because of numerous activities in improving the expression of such complex proteins with a focus on either protein engineering or on engineering the protein expression host P. pastoris. This review refers to established tools in protein expression in P. pastoris and highlights novel developments in the areas of expression vector design, host strain engineering and screening for high-level expression strains. Breakthroughs in membrane protein expression are discussed alongside numerous commercial applications of P. pastoris derived proteins.

An analysis of oligomerization interfaces in transmembrane proteins

BACKGROUND

The amount of transmembrane protein (TM) structures solved to date is now large enough to attempt large scale analyses. In particular, extensive studies of oligomeric interfaces in the transmembrane region are now possible.

RESULTS

We have compiled the first fully comprehensive set of validated transmembrane protein interfaces in order to study their features and assess what differentiates them from their soluble counterparts.

CONCLUSIONS

The general features of TM interfaces do not differ much from those of soluble proteins: they are large, tightly packed and possess many interface core residues. In our set, membrane lipids were not found to significantly mediate protein-protein interfaces. Although no G protein-coupled receptor (GPCR) was included in the validated set, we analyzed the crystallographic dimerization interfaces proposed in the literature. We found that the putative dimer interfaces proposed for class A GPCRs do not show the usual patterns of stable biological interfaces, neither in terms of evolution nor of packing, thus they likely correspond to crystal interfaces. We cannot however rule out the possibility that they constitute transient or weak interfaces. In contrast we do observe a clear signature of biological interface for the proposed dimer of the class F human Smoothened receptor.

Quantitative residue-level structure-evolution relationships in the yeast membrane proteome

Membrane proteins exist in distinctly different environments than do soluble proteins, resulting in differences between their respective biophysical and evolutionary properties. In comparison with soluble proteins, relatively little is known about how the unique biophysical properties of membrane proteins affect their evolutionary properties at the residue level. In particular, transmembrane (TM) regions of membrane proteins tend to be more conserved than regions outside of the membrane (extramembrane [EM] regions), but the mechanisms underlying this phenomenon are not well understood. Here, we combine homology-based high-resolution three-dimensional protein models with rigorous evolutionary rate calculations to quantitatively assess residue-level structure-evolution relationships in the yeast membrane proteome. We find that residue evolutionary rate increases linearly with decreasing residue burial, regardless of the hydrophobic or hydrophilic nature of the solvent environment. This finding supports a direct relationship between a residue's selective constraint and the extent of its packing interactions with neighboring residues, independent of hydrophobic effects. Most importantly, for a fixed degree of burial, residues from TM regions tend to evolve more slowly than residues from EM regions. We attribute this difference to the increased importance of packing constraints and the decreased importance of hydrophobic effects in TM regions. This additional selective constraint on TM residues plays a dominant role in explaining why TM regions evolve more slowly than EM regions. In addition to revealing the universality of the linear relationship between residue burial and selective constraint across solvent environments, our work highlights the distinct residue-level evolutionary consequences imposed by the unique biophysical properties of the membrane environment.

Atox1 contains positive residues that mediate membrane association and aid subsequent copper loading

Copper chaperones bind intracellular copper and ensure proper trafficking to downstream targets via protein-protein interactions. In contrast to the mechanisms of copper binding and transfer to downstream targets, the mechanisms of initial copper loading of the chaperones are largely unknown. Here, we demonstrate that antioxidant protein 1 (Atox1 in human cells), the principal cellular copper chaperone responsible for delivery of copper to the secretory pathway, possesses the ability to interact with negatively charged lipid headgroups via distinct surface lysine residues. Moreover, loss of these residues lowers the efficiency of copper loading of Atox1 in vivo, suggesting that the membrane may play a scaffolding role in copper distribution to Atox1. These findings complement the recent discovery that the membrane also facilitates copper loading of the copper chaperone for superoxide dismutase 1 and provide further support for the emerging paradigm that the membrane bilayer plays a central role in cellular copper acquisition and distribution.

A novel cholesterol-producing Pichia pastoris strain is an ideal host for functional expression of human Na,K-ATPase α3β1 isoform

The heterologous expression of mammalian membrane proteins in lower eukaryotes is often hampered by aberrant protein localization, structure, and function, leading to enhanced degradation and, thus, low expression levels. Substantial quantities of functional membrane proteins are necessary to elucidate their structure-function relationships. Na,K-ATPases are integral, human membrane proteins that specifically interact with cholesterol and phospholipids, ensuring protein stability and enhancing ion transport activity. In this study, we present a Pichia pastoris strain which was engineered in its sterol pathway towards the synthesis of cholesterol instead of ergosterol to foster the functional expression of human membrane proteins. Western blot analyses revealed that cholesterol-producing yeast formed enhanced and stable levels of human Na,K-ATPase α3β1 isoform. ATPase activity assays suggested that this Na,K-ATPase isoform was functionally expressed in the plasma membrane. Moreover, [(3)H]-ouabain cell surface-binding studies underscored that the Na,K-ATPase was present in high numbers at the cell surface, surpassing reported expression strains severalfold. This provides evidence that the humanized sterol composition positively influenced Na,K-ATPase α3β1 stability, activity, and localization to the yeast plasma membrane. Prospectively, cholesterol-producing yeast will have high potential for functional expression of many mammalian membrane proteins.

Neutral phospholipids stimulate Na,K-ATPase activity: a specific lipid-protein interaction

Membrane proteins interact with phospholipids either via an annular layer surrounding the transmembrane segments or by specific lipid-protein interactions. Although specifically bound phospholipids are observed in many crystal structures of membrane proteins, their roles are not well understood. Na,K-ATPase is highly dependent on acid phospholipids, especially phosphatidylserine, and previous work on purified detergent-soluble recombinant Na,K-ATPase showed that phosphatidylserine stabilizes and specifically interacts with the protein. Most recently the phosphatidylserine binding site has been located between transmembrane segments of αTM8-10 and the FXYD protein. This paper describes stimulation of Na,K-ATPase activity of the purified human α1β1 or α1β1FXYD1 complexes by neutral phospholipids, phosphatidylcholine, or phosphatidylethanolamine. In the presence of phosphatidylserine, soy phosphatidylcholine increases the Na,K-ATPase turnover rate from 5483 ± 144 to 7552 ± 105 (p < 0.0001). Analysis of α1β1FXYD1 complexes prepared with native or synthetic phospholipids shows that the stimulatory effect is structurally selective for neutral phospholipids with polyunsaturated fatty acyl chains, especially dilinoleoyl phosphatidylcholine or phosphatidylethanolamine. By contrast to phosphatidylserine, phosphatidylcholine or phosphatidylethanolamine destabilizes the Na,K-ATPase. Structural selectivity for stimulation of Na,K-ATPase activity and destabilization by neutral phospholipids distinguish these effects from the stabilizing effects of phosphatidylserine and imply that the phospholipids bind at distinct sites. A re-examination of electron densities of shark Na,K-ATPase is consistent with two bound phospholipids located between transmembrane segments αTM8-10 and TMFXYD (site A) and between TM2, -4, -6, -and 9 (site B). Comparison of the phospholipid binding pockets in E2 and E1 conformations suggests a possible mechanism of stimulation of Na,K-ATPase activity by the neutral phospholipid.

Transmembrane signaling and assembly of the cytochrome b6f-lipidic charge transfer complex

Structure-function properties of the cytochrome b6f complex are sufficiently unique compared to those of the cytochrome bc1 complex that b6f should not be considered a trivially modified bc1 complex. A unique property of the dimeric b6f complex is its involvement in transmembrane signaling associated with the p-side oxidation of plastoquinol. Structure analysis of lipid binding sites in the cyanobacterial b6f complex prepared by hydrophobic chromatography shows that the space occupied by the H transmembrane helix in the cytochrome b subunit of the bc1 complex is mostly filled by a lipid in the b6f crystal structure. It is suggested that this space can be filled by the domain of a transmembrane signaling protein. The identification of lipid sites and likely function defines the intra-membrane conserved central core of the b6f complex, consisting of the seven trans-membrane helices of the cytochrome b and subunit IV polypeptides. The other six TM helices, contributed by cytochrome f, the iron-sulfur protein, and the four peripheral single span subunits, define a peripheral less conserved domain of the complex. The distribution of conserved and non-conserved domains of each monomer of the complex, and the position and inferred function of a number of the lipids, suggests a model for the sequential assembly in the membrane of the eight subunits of the b6f complex, in which the assembly is initiated by formation of the cytochrome b6-subunit IV core sub-complex in a monomer unit. Two conformations of the unique lipidic chlorophyll a, defined in crystal structures, are described, and functions of the outlying β-carotene, a possible 'latch' in supercomplex formation, are discussed. This article is part of a Special Issue entitled: Respiratory complex III and related bc complexes.

Ligand-dependent cholesterol interactions with the human A(2A) adenosine receptor

We present nearly 10 μs of all-atom simulation data of a G-protein coupled receptor, the human A2A adenosine receptor, bound to four different ligands. Our focus is on binding of cholesterol to the "cholesterol consensus motif," a cluster of five amino acids on the second and fourth transmembrane helices, which interact with two cholesterols in the intracellular leaflet of the bilayer. We find evidence for a ligand-specific interaction between the CCM and cholesterol, mediated by the rotameric dynamics and configuration of Trp129. Binding of the synthetic agonist UK432097 disrupts hydrogen bonding between Trp129 and Ser47, which activates the rotameric dynamics of Trp129 and disrupts the interaction with one of the two cholesterols. We also investigate the effect of four thermostabilizing mutations, three of which are located on helix two. The conformational stability of helix two has been proposed to be sensitive to interaction with cholesterol in the CCM, suggesting a mechanism for the thermostabilization. However, our data are instead suggestive of a force-field dependent "straightening" of helix two, and therefore offer no basis for rationalizing the effect of the quadruple mutant.

Prediction and design of outer membrane protein-protein interactions

Protein-protein interactions (PPI) play central roles in biological processes, motivating us to understand the structural basis underlying affinity and specificity. In this chapter, we focus on biochemical and computational design strategies of assessing and detecting PPIs of β-barrel outer membrane proteins (OMPs). A few case studies are presented highlighting biochemical techniques used to dissect the energetics of oligomerization and determine amino acids forming the key interactions of the PPI sites. Current computational strategies for detecting/predicting PPIs are introduced, and examples of computational and rational engineering strategies applied to OMPs are presented.

Predictions for cholesterol interaction sites on the A2A adenosine receptor

Molecular dynamics simulations of the A(2A) adenosine receptor totaling 1.4 μs show clear evidence for specific sites mediating interactions between adenosine-bound A(2A) and cholesterol. The strongest evidence is for three binding sites. Two are in the extracellular leaflet, with one site interacting with helices VII and I, and the other with helices II and III. One site is located in the intracellular leaflet, interacting with helices III and IV. One of our three predicted binding sites is confirmed by a just-published high-resolution structure of A(2A) cocrystallized with an antagonist.

Lipids of archaeal viruses

Archaeal viruses represent one of the least known territory of the viral universe and even less is known about their lipids. Based on the current knowledge, however, it seems that, as in other viruses, archaeal viral lipids are mostly incorporated into membranes that reside either as outer envelopes or membranes inside an icosahedral capsid. Mechanisms for the membrane acquisition seem to be similar to those of viruses infecting other host organisms. There are indications that also some proteins of archaeal viruses are lipid modified. Further studies on the characterization of lipids in archaeal viruses as well as on their role in virion assembly and infectivity require not only highly purified viral material but also, for example, constant evaluation of the adaptability of emerging technologies for their analysis. Biological membranes contain proteins and membranes of archaeal viruses are not an exception. Archaeal viruses as relatively simple systems can be used as excellent tools for studying the lipid protein interactions in archaeal membranes.

The role of lipids in defining membrane protein interactions: insights from mass spectrometry

Cellular membranes comprise hundreds of lipids in which protein complexes, such as ion channels, receptors, and scaffolding complexes, are embedded. These protein assemblies act as signalling and trafficking platforms for processes fundamental to life. Much effort in recent years has focused on identifying the protein components of these complexes after their extraction from the lipid membrane in detergent micelles. Spectacular advances have been made using X-ray crystallography, providing in some cases detailed information about the mechanism of pumping and channel gating. These structural studies are leading to a growing realisation that, to understand their function, it is not only the structures of the protein components that are important but also knowledge of the protein-lipid interactions. This review highlights recent insights gained from this knowledge, surveys methods being developed for probing these interactions, and focuses specifically on the potential of mass spectrometry in this growing area of research.

A two-stage model for lipid modulation of the activity of integral membrane proteins

Lipid-protein interactions play an essential role in the regulation of biological function of integral membrane proteins; however, the underlying molecular mechanisms are not fully understood. Here we explore the modulation by phospholipids of the enzymatic activity of the plasma membrane calcium pump reconstituted in detergent-phospholipid mixed micelles of variable composition. The presence of increasing quantities of phospholipids in the micelles produced a cooperative increase in the ATPase activity of the enzyme. This activation effect was reversible and depended on the phospholipid/detergent ratio and not on the total lipid concentration. Enzyme activation was accompanied by a small structural change at the transmembrane domain reported by 1-aniline-8-naphtalenesulfonate fluorescence. In addition, the composition of the amphipilic environment sensed by the protein was evaluated by measuring the relative affinity of the assayed phospholipid for the transmembrane surface of the protein. The obtained results allow us to postulate a two-stage mechanistic model explaining the modulation of protein activity based on the exchange among non-structural amphiphiles at the hydrophobic transmembrane surface, and a lipid-induced conformational change. The model allowed to obtain a cooperativity coefficient reporting on the efficiency of the transduction step between lipid adsorption and catalytic site activation. This model can be easily applied to other phospholipid/detergent mixtures as well to other membrane proteins. The systematic quantitative evaluation of these systems could contribute to gain insight into the structure-activity relationships between proteins and lipids in biological membranes.

First crystal structures of Na+,K+-ATPase: new light on the oldest ion pump

Na(+),K(+)-adenosine triphosphatase (NKA) is the first P-type ion translocating adenosine triphosphatase (ATPase) ever identified, and the significance of this class of proteins was highlighted by the 1997 Nobel Prize in Chemistry awarded to Jens C. Skou for the discovery in 1957. More than half a century passed between the initial identification and the publication of a high-resolution crystal structure of NKA. Although the new crystal structures provided many surprises and insights, structural biology on this system remains challenging, as NKA is a very difficult protein to crystallize. Here we explain the reasons behind the challenges, introduce a mechanism that governs the function, and summarize current knowledge of NKA structure in comparison with another member of the P-type ATPase family, Ca(2+)-ATPase.

Engineered oligomerization state of OmpF protein through computational design decouples oligomer dissociation from unfolding

Biogenesis of β-barrel membrane proteins is a complex, multistep, and as yet incompletely characterized process. The bacterial porin family is perhaps the best-studied protein family among β-barrel membrane proteins that allows diffusion of small solutes across the bacterial outer membrane. In this study, we have identified residues that contribute significantly to the protein-protein interaction (PPI) interface between the chains of outer membrane protein F (OmpF), a trimeric porin, using an empirical energy function in conjunction with an evolutionary analysis. By replacing these residues through site-directed mutagenesis either with energetically favorable residues or substitutions that do not occur in natural bacterial outer membrane proteins, we succeeded in engineering OmpF mutants with dimeric and monomeric oligomerization states instead of a trimeric oligomerization state. Moreover, our results suggest that the oligomerization of OmpF proceeds through a series of interactions involving two distinct regions of the extensive PPI interface: two monomers interact to form a dimer through the PPI interface near G19. This dimer then interacts with another monomer through the PPI interface near G135 to form a trimer. We have found that perturbing the PPI interface near G19 results in the formation of the monomeric OmpF only. Thermal denaturation of the designed dimeric OmpF mutant suggests that oligomer dissociation can be separated from the process of protein unfolding. Furthermore, the conserved site near G57 and G59 is important for the PPI interface and might provide the essential scaffold for PPIs.

Predicting three-dimensional structures of transmembrane domains of β-barrel membrane proteins

β-Barrel membrane proteins are found in the outer membrane of gram-negative bacteria, mitochondria, and chloroplasts. They are important for pore formation, membrane anchoring, and enzyme activity. These proteins are also often responsible for bacterial virulence. Due to difficulties in experimental structure determination, they are sparsely represented in the protein structure databank. We have developed a computational method for predicting structures of the transmembrane (TM) domains of β-barrel membrane proteins. Based on physical principles, our method can predict structures of the TM domain of β-barrel membrane proteins of novel topology, including those from eukaryotic mitochondria. Our method is based on a model of physical interactions, a discrete conformational state space, an empirical potential function, as well as a model to account for interstrand loop entropy. We are able to construct three-dimensional atomic structure of the TM domains from sequences for a set of 23 nonhomologous proteins (resolution 1.8-3.0 Å). The median rmsd of TM domains containing 75-222 residues between predicted and measured structures is 3.9 Å for main chain atoms. In addition, stability determinants and protein-protein interaction sites can be predicted. Such predictions on eukaryotic mitochondria outer membrane protein Tom40 and VDAC are confirmed by independent mutagenesis and chemical cross-linking studies. These results suggest that our model captures key components of the organization principles of β-barrel membrane protein assembly.