Nitrogen-doped fluorescence carbon dots as multi-mechanism detection for iodide and curcumin in biological and food samples

Portable smartphone platform utilizing AIE-featured carbon dots for multivariate visual detection for Cu2+, Hg2+ and BSA in real samples

Heavy metals cause serious toxic threats to both environment and human health. The multivariate, instrument-free, portable, and rapid detection strategy is crucial for determination of heavy metals. Herein, aggregation-induced emission (AIE) featured carbon dots (SN-CDs) were fabricated hydrothermally by optimizing co-doping precursors. With bright yellow emission at 560 nm, the SN-CDs were utilized for multivariate sensing Cu2+, Hg2+ and bovine serum albumin (BSA) based on AIE behavior and static quenching effect, with detection limits of 0.46 μmol·L-1, 25.8 nmol·L-1 and 1.52 μmol·L-1. A portable smartphone platform was constructed to enable portable, prompt, and sensitive analysis for Cu2+, Hg2+, and BSA via different strategies in real water and food samples with satisfied recovery. Moreover, a logic gate circuit was designed to provide the possibilities for utilization of intelligent facility. The proposed AIE SN-CDs possessing great contribution in preferable sensing performance, present promising prospects in real-time monitoring of environment and food safety.

A sharp and selective fluorescence paper-based sensor based on inner filter effect for ratiometric detection of four Sudan dyes in food matrix

The addition of Sudan dyes with carcinogenic effects to food threatens human health. Herein, a ratiometric fluorescence strip consisting of core-shell upconversion particles (NaYF4:Yb,Tm@NaYF4:Yb,Er), metal-organic frameworks and dual-template molecularly imprinted polymers was developed to selectively and sensitively detect four Sudan dyes based on inner filter effect (detection time only takes 8 min). The high adsorption capacity of metal-organic frameworks and the greater overlap between the emission of NaYF4:Yb,Tm@NaYF4:Yb,Er and the absorbance of four Sudan dyes enable the signal responses to be more sensitive. The limits of detection in chilli powder samples are as low as 29.87 ng/g, 37.55 ng/g, 47.89 ng/g and 51.02 ng/g, with satisfactory recovery (93.32-103.4%) and minor relative standard deviations (≤4.3%). This method broadens the idea for low-cost and portable detection of multiple illegal additives in complex substrates with high selectivity and sensitivity based on one kind of fluorescent strip.

Carbon dots as versatile nanomaterials in sensing and imaging: Efficiency and beyond

Carbon dots (CDs) have emerged as a versatile and promising carbon-based nanomaterial with exceptional optical properties, including tunable emission wavelengths, high quantum yield, and photostability. CDs are appropriate for various applications with many benefits, such as biocompatibility, low toxicity, and simplicity of surface modification. Thanks to their tunable optical properties and great sensitivity, CDs have been used in sensing as fluorescent probes for detecting pH, heavy metal ions, and other analytes. In addition, CDs have demonstrated potential as luminescence converters for white organic light-emitting diodes and light emitters in optoelectronic devices due to their superior optical qualities and exciton-independent emission. CDs have been used for drug administration and bioimaging in the biomedical field due to their biocompatibility, low cytotoxicity, and ease of functionalization. Additionally, due to their stability, efficient charge separation, and low recombination rate, CDs have shown interesting uses in energy systems, such as photocatalysis and energy conversion. This article highlights the growing possibilities and potential of CDs as adaptable nanomaterials in a variety of interdisciplinary areas related to sensing and imaging, at the same time addressing the major challenges involved in the current research and proposing scientific solutions to apply CDs in the development of a super smart society.

Ratiometric fluorescence method comprising carbon dots and rhodamine 6G encapsulated in metal-organic framework microcubes for curcumin detection

A ratiometric fluorescence method comprising carbon dots (CDs) and rhodamine 6G (Rh-6G) encapsulated in the microcubes of metal-organic framework (MOF-5) is introduced for the sensitive detection of curcumin (Cur) in condiments. CDs@MOF-5@Rh-6G, synthesized by the adsorption of Rh-6G on MOF-5 embedded with CDs, showed two distinct emission peaks at 435 and 560 nm under excitation at 335 nm, and could be used for Cur detection by ratiometric fluorescence. In the presence of Cur, the fluorescence of the CDs at 435 nm (F435) was quenched by Cur owing to internal filtering and dynamic quenching effects, whereas the emission of Rh-6G at 560 nm (F560) remained unchanged (335 nm is the excitation wavelength, 435 and 560 nm are the emission wavelengths, in which F435/F560 values are used as the output results). Under optimal conditions, a linear relationship was observed between the Cur concentration (in the range 0.1-5 μmol/L) and F435/F560 value for CDs@MOF-5@Rh-6G, with a detection limit of 15 nmol/L. Notably, the proposed method could accurately detect Cur in mustard, curry, and red pepper powders. Therefore, this study could improve the quality control of food and facilitate the development of sensitive ratiometric fluorescence probes.

Imidazolium-Functionalized Conjugated Polymer for On-Site Visual and Ultrasensitive Detection of Toxic Hexavalent Chromium

Hexavalent chromium [Cr(VI)] is considered a serious environmental pollutant that possesses a hazardous effect on humans even at low concentrations. Thus, the development of a bifunctional material for ultratrace-selective detection and effective elimination of Cr(VI) from the environment remains highly desirable and scarcely reported. In this work, we explore an imidazolium-appended polyfluorene derivative PF-DBT-Im as a highly sensitive/selective optical probe and a smart adsorbent for Cr(VI) ions with an ultralow detection limit of 1.77 nM and removal efficiency up to 93.7%. In an aqueous medium, PF-DBT-Im displays obvious transformation in its emission color from blue to magenta on exclusively introducing Cr(VI), facilitating naked-eye colorimetric detection. Consequently, a portable sensory device integrated with a smartphone is fabricated for realizing real-time and on-site visual detection of Cr(VI). Besides, the imidazolium groups attached onto side chains of PF-DBT-Im are found to be highly beneficial for achieving selective and efficient elimination of Cr(VI) with capacity as high as 128.71 mg g-1. More interestingly, PF-DBT-Im could be easily regenerated following treatment with KBr and can be recycled at least five times in a row. The main factor behind ultrasensitive response and excellent removal efficiency is found to be anion-exchange-induced formation of a unique ground-state complex between PF-DBT-Im and Cr(VI), as evident by FT-IR, XPS, and simulation studies. Thus, taking advantage of the excellent signal amplification property and rich ion-exchange sites, a dual-functional-conjugated polymer PF-DBT-Im is presented for the concurrent recognition and elimination of Cr(VI) ions proficiently and promptly with great prospects in environmental monitoring and water decontamination.

A Recent Advancement in Food Quality Assessment: Using MOF-Based Sensors: Challenges and Future Aspects

Monitoring food safety is crucial and significantly impacts the ecosystem and human health. To adequately address food safety problems, a collaborative effort needed from government, industry, and consumers. Modern sensing technologies with outstanding performance are needed to meet the growing demands for quick and accurate food safety monitoring. Recently, emerging sensors for regulating food safety have been extensively explored. Along with the development in sensing technology, the metal-organic frameworks (MOF)-based sensors gained more attention due to their excellent sensing, catalytic, and adsorption properties. This review summarizes the current advancements and applications of MOFs-based sensors, including colorimetric, electrochemical, luminescent, surface-enhanced Raman scattering, and electrochemiluminescent sensors. and also focused on the applications of MOF-based sensors for the monitoring of toxins such as heavy metals, pesticide residues, mycotoxins, pathogens, and illegal food additives from food samples. Future trends, as well as current developments in MOF-based materials.

Boric acid group-functional ruthenium complex as a novel fluorescence probe for robust detection of propyl gallate and tert-butyl hydroquinone by tuning the pH

This study reported a ruthenium complex-based fluorescence probe, achieving rapid and sequential detection of propyl gallate (PG) and tert-butyl hydroquinone (TBHQ) for the first time by tuning pH only. Under 480 nm excitation, probe exhibited intensive emission at 620 nm, which was selectively quenched by PG at pH 7.0 due to the covalent binding between the boric acid of probe and o-diphenol hydroxyl of PG. Then pH was tuned to 7.4, the emission was significantly quenched by TBHQ because of the π-π stacking between aromatic rings of probe and paraquinone of TBHQ. This probe realized specific and sensitive detection of PG and TBHQ with wide range and low detection limit (0.26 µM for PG and 0.66 µM for TBHQ). Furthermore, a portable visual test paper detection platform was built based on this probe for rapid and sensitive detection of antioxidants in food, which was of great significance for market regulation.

Recent advancements in nanomaterial based optical detection of food additives: a review

Food additives have become a critical component in the food industry. They are employed as preservatives to decelerate the negative effects of environmental and microbial factors on food quality. Currently, food additives are used for a variety of purposes, including colorants, flavor enhancers, nutritional supplements, etc., owing to improvements in the food industry. Since the usage of food additives has increased dramatically, the efficient monitoring of their acceptable levels in food products is quite necessary to mitigate the problems associated with their inappropriate use. The traditional methods used for detecting food additives are generally based on standard spectroscopic and chromatographic techniques. However, these analytical techniques are limited by their high instrumentation cost and time-consuming procedures. The emerging field of nanotechnology has enabled the development of highly sensitive and specific sensors to analyze food additives in a rapid manner. The current article emphasizes the need to detect various food additives owing to their potential negative effects on humans, animals, and the environment. In this article, the role of nanomaterials in the optical sensing of food additives has been discussed owing to their high accuracy, ease-of-use, and excellent sensitivity. The applications of nanosensors for the detection of various food additives have been elaborated with examples. The current article will assist policymakers in developing new rules and regulations to mitigate the adverse effects of toxic food additives on humans and the environment. In addition, the prospects of nanosensors for the optical detection of food additives at a commercial scale have been discussed to combat their irrational use in the food industry.

Novel "on-off" fluorescence sensing for rapid and accurate determination of Cr3+ based on g-CNQDs

Cr3+ is one of the most essential trace elements in living organisms and plays a vital role in human metabolism. However, both deficiency and excess intake of Cr3+ can be harmful to the human body. Therefore, the quantitative determination of Cr3+ is of great significance in the field of life science. Based on this, in this study, a g-CNQDs@p-acetaminophenol fluorescence sensing system was developed for the quantitative detection of Cr3+ in actual complex samples. G-CNQDs were synthesized with sodium citrate and urea as precursors. The fluorescence signal was enhanced by the synergistic effect between p-acetaminophenol (APAP) and g-CNQDs. The fluorescence quenching phenomenon can be produced when Cr3+ is introduced into the fluorescence-enhanced g-CNQDs@p-acetaminophenol system. An "on-off" fluorescence sensing system was constructed based on g-CNQDs@p-acetaminophenol for the quantitative detection of Cr3+. The experimental data showed a wide linear region in the concentration range of 0.64-63.0 μM, and the detection limit was as low as 0.23 μM. The construction of the sensor system broadens the research field for the practical application of Cr3+.

A Dual-mode Ratiometric Fluorometric and Colorimetric Platform Based on Nitrogen-doped Carbon Dots and o-phenylenediamine for the Detection of Nitrite

In this study, a dual-mode ratiometric fluorometric and colorimetric platform for the determination of nitrite in pickles was proposed by exquisitely employing the fact that non-fluorescent o-Phenylenediamine (OPD) was oxidized by nitrite under acidic conditions to form fluorescent 2,3-diaminophenazine (DAP) (Em = 575), which meanwhile quench the fluorescent nitrogen-doped carbon dots (N-CDs) at 455 nm, the ratio of fluorescence intensity of DAP to N-CDs (F575/F455) changed with the increase of nitrite accompanied by visible color changes. Thus, nitrite can be quantitatively detected within a wide linear range (10-500 µM) with a low detection limit of 0.45 µM due to the high quantum yield of 39.7% of N-CDs. In addition, the colour of the N-CDs/OPD system changed from transparent to yellow when the nitrite was introduced, enabling colorimetric and on-site visual detection. The detection limit of the colorimetric method was 3.03 µM with a linear range of 10-500 µM. The proposed ratiometric fluorometric method has pleasant selectivity and good immunity to interference.

Synergistic effect-triggered fluorescence quenching enables rapid and sensitive detection of alkaline phosphatase

The development of biosensors mediated by synergistic quenching effect is of great significance for rapid and accurate clinical diagnosis. Hence, we prepared a cyan-emitting fluorescent Si dots for alkaline phosphatase (ALP) detection through the synergistic quenching effect of inner filter effect (IFE) and photo-induced electron transfer (PET). Si dots were prepared by microwave-assisted method, which displayed high quantum yield (28.7%), as well as good physiochemical properties, such as photo-stability, pH stability, and chemical stability. As the hydrolysate of 4-nitrophenyl phosphate disodium salt hexahydrate catalyzed by ALP, both IFE and PET of 4-nitrophenyl to Si dots were used for the turn-off mode detection of ALP. The linear relationships were established between the change of fluorescence intensity and ALP concentration in the range of 0.05 U L^-1 to 5.0 U L-1, and 5.0 U L^-1 to 80.0 U L^-1, respectively. The detection limit was 0.01 U L^-1. The synergistic quenching effect caused the turn-off mode detection to be more sensitive, and it can also be used for the accurate detection of ALP in human serum, thereby showing great anti-interference ability in complex environments.

Target-triggered 'colorimetric-fluorescence' dual-signal sensing system based on the versatility of MnO2 nanosheets for rapid detection of uric acid

A simple dual-signal assay that combined colorimetric and fluorometric strategy for uric acid (UA) rapid detection was designed based on the versatility of facile synthesized MnO2 nanosheet. The oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) and the fluorescence quenching of quantum dots (QDs) occurred simultaneously in the presence of MnO2 nanosheet. UA could decompose MnO2 nanosheet into Mn2+, resulting in the fluorescence recovery of QDs, along with the fading of the blue color of ox TMB. Based on the principles above, the detection of UA could be realized by the change of the dual signals (colorimetric and fluorometric). The linear range of the colorimetric mode was 5-60 μmol L-1, and the limit of detection (LOD) was 2.65 μmol L-1; the linear range of the fluorescence mode was wide at 5-120 μmol L-1, and the LOD could be as low as 1.33 μmol L-1. The method was successfully used for analyzing UA levels in human serum samples, indicating that this new dual-signal method could be applied in clinical diagnosis.

Recent developments, applications and challenges for carbon quantum dots as a photosynthesis enhancer in agriculture

Since the world's population is expanding, mankind may be faced with a huge dilemma in the future, which is food scarcity. The situation can be mitigated by employing sustainable cutting-edge agricultural methods to maintain the food supply chain. In recent years, carbon quantum dots (CQD), a member of the well-known carbon-based nanomaterials family, have given rise to a new generation of technologies that have the potential to revolutionise horticulture and agriculture research. CQD has drawn much attention from the research community in agriculture owing to their remarkable properties such as good photoluminescence behaviour, high biocompatibility, photo-induced electron transfer, low cost, and low toxicity. These unique properties have led CQD to become a promising material to increase plant growth and yield in the agriculture field. This review paper highlights the recent advances of CQD application in plant growth and photosynthesis rate at different concentrations, with a focus on CQD uptake and translocation, as well as electron transfer mechanism. The toxicity and biocompatibility studies of CQD, as well as industrial scale applications of CQD for agriculture are discussed. Finally, the current challenges of the present and future perspectives in this agriculture research are presented.

Waste-Derived Sustainable Fluorescent Nanocarbon-Coated Breathable Functional Fabric for Antioxidant and Antimicrobial Applications

Hospital-acquired (nosocomial) infections account for the majority of adverse health effects during care delivery, placing an immense financial strain on healthcare systems around the world. For the first time, the present article provides evidence of a straightforward pollution-free technique to fabricate a heteroatom-doped carbon dot immobilized fluorescent biopolymer composite for the development of functional textiles with antioxidant and antimicrobial properties. A simple, facile, and eco-friendly approach was devised to prepare heteroatom-doped carbon dots from waste green tea and a biopolymer. The carbon dots showed an excitation-dependent emission behavior, and the XPS data unveiled that they are co-doped with nitrogen and sulfur. A facile physical compounding strategy was adopted to fabricate a carbon dot reinforced biopolymeric composite followed by immobilization onto the textile. The composite textiles revealed excellent antioxidant activity, determined by 1,1-diphenyl-2-picrylhydrazyl (>80%) and 2,2'-azinobis-3-ethylbenzothiazoline-6-sulfonic acid assays (>90%). The results of the disc diffusion assay indicated that the composite textiles substantially inhibited the growth of both tested bacteria Escherichia coli and Bacillus subtilis with increasing coating cycles. The time-dependent antibacterial experiments revealed that the nanocomposite can inhibit significant bacterial growth within a few hours. The present study could open up the possibility for the commercialization of inexpensive smart textile substrates for the prevention of microbial contamination used for the medical and healthcare field.

Citric Acid-Based Intrinsic Band-Shifting Photoluminescent Materials

Citric acid, an important metabolite with abundant reactive groups, has been demonstrated as a promising starting material to synthesize diverse photoluminescent materials including small molecules, polymers, and carbon dots. The unique citrate chemistry enables the development of a series of citric acid-based molecules and nanomaterials with intriguing intrinsic band-shifting behavior, where the emission wavelength shifts as the excitation wavelength increases, ideal for chromatic imaging and many other applications. In this review, we discuss the concept of "intrinsic band-shifting photoluminescent materials", introduce the recent advances in citric acid-based intrinsic band-shifting materials, and discuss their potential applications such as chromatic imaging and multimodal sensing. It is our hope that the insightful and forward-thinking discussion in this review will spur the innovation and applications of the unique band-shifting photoluminescent materials.

High-performance photocatalytic peroxymonosulfate activation by carbon quantum dots via precise surface chemistry regulation: Insight into the structure-function relations

Carbon quantum dots (CQDs) are considered promising metal-free green catalysts for the activation of persulfates, but direct experimental evidence to identify the true active sites on the surface of CQDs is still lacking. We prepared CQDs with different oxygen contents by controlling the carbonisation temperature, using a simple pyrolysis method. Photocatalytic activity experiments show that CQDs₂₀₀ exhibits the best PMS activation performance. By investigating the relationship between the oxygen functional groups on CQDs surface and photocatalytic activity, it was postulated that the C=O groups might be the predominant active site, which was confirmed by selective chemical titrations of the C=O, C-OH and COOH groups. Furthermore, limited to the weak photocatalytic properties of the pristine CQDs, ammonia and phenylhydrazine were used to precisely nitrogen-modify the o-CQD surface. We found that phenylhydrazine-modified o-CQDs-PH promoted the absorption of visible light and the separation of photocarriers, thus enhancing the activation of PMS. Theoretical calculations provide more insights from different levels of the pollutant, fine-tuned CQDs, and their interactions.

Prospects and Challenges of Synergistic Effect of Fluorescent Carbon Dots, Liposomes and Nanoliposomes for Theragnostic Applications

The future of molecular-level therapy, efficient medical diagnosis, and drug delivery relies on the effective theragnostic function which can be achieved by the synergistic effect of fluorescent carbon dots (FCDs) liposomes (L) and nanoliposomes. FCDs act as the excipient navigation agent while liposomes play the role of the problem-solving agent, thus the term "theragnostic" would describe the effect of LFCDs properly. Liposomes and FCDs share some excellent at-tributes such as being nontoxic and biodegradable and they can represent a potent delivery system for pharmaceutical compounds. They enhance the therapeutic efficacy of drugs via stabilizing the encapsulated material by circumventing barriers to cellular and tissue uptake. These agents facilitate long-term drug biodistribution to the intended locations of action while eliminating systemic side effects. This manuscript reviews recent progress with liposomes, nanoliposomes (collectively known as lipid vesicles) and fluorescent carbon dots, by exploring their key characteristics, applications, characterization, performance, and challenges. An extensive and intensive understanding of the synergistic interaction between liposomes and FCDs sets out a new research pathway to an efficient and theragnostic / theranostic drug delivery and targeting diseases such as cancer.

Rapid and sensitive determination of Piroxicam by N-doped carbon dots prepared by plant soot

Piroxicam (PX) as a nonsteroidal anti-inflammatory drug (NSAID) can be effectively used for anti-inflammatory and analgesia. However, overdoses may induce side effects such as gastrointestinal ulcers and headaches. Therefore, the assay of piroxicam has considerable significance. In this work, nitrogen-doped carbon dots (N-CDs) was synthesized for PX detection. The fluorescence sensor was fabricated by hydrothermal method with plant soot and ethylenediamine. The strategy exhibited a detection range of 6-200 μg/mL and 250-700 μg/mL with the limited detection of 2 μg/mL. The mechanism of the PX assay base on the fluorescence sensor was the process of electron transfer between the PX and N-CDs. The assay subsequently demonstrated could be successfully used in actual sample. The results indicated that the N-CDs could be a superior candidate nanomaterial for piroxicam monitoring in the healthcare product industry.

Activated cascade effect for dual-mode ratiometric and smartphone-assisted visual detection of curcumin and F- based on nitrogen-doped carbon dots

The growing persistence of harmful ion or drug molecular residues has always been considered as a matter of concern due to its importance in biological and environmental processes, which requires taking measures to maintain environmental health sustainably and effectively. Inspired by the multi-system and visual quantitative detection of nitrogen-doped carbon dots (N-CDs), we develop a novel cascade nano-system based on dual emission carbon dots for on-site visual quantitative detection of curcumin and fluoride ion (F^-). Herein, tris (hydroxymethyl) aminomethane (Tris) and m-dihydroxybenzene (m-DHB) are elected as reaction precursors to synthesize dual-emission N-CDs by a one-step hydrothermal method. The obtained N-CDs exhibit dual emission peaks at 426 nm (blue) and 528 nm (green) with quantum yields of 53 % and 71 %, respectively. Then, trace curcumin and F^- intelligent off-on-off sensing probe is formed by taking advantage of the activated cascade effect. As for the occurrence of inner filter effect (IFE) and fluorescence resonance energy transfer (FRET), the green fluorescence of N-CDs quenches remarkably, called as OFF initial state. Then the curcumin-F^- complex leads to the hypochromatic shift of the absorption band from 532 to 430 nm, which activates the green fluorescence of N-CDs, named as ON state. Meanwhile, the blue fluorescence of N-CDs is quenched due to the FRET, called as OFF terminal state. This system shows good linear relationships from 0 to 35 μM and 0 to 40 μM with low detection limits of 29 nM and 42 nM for curcumin and F^- ratiometric detection, respectively. Moreover, a smartphone-assisted analyzer is developed for on-site quantitative detection. Furthermore, we design a logic gate for logistics information storage, which proves the possibility of a logic gate based on N-CDs in practical application. Thus, our work will provide an effective strategy for environmental quantitative monitoring and information storage encryption.

Highly efficient ferric ion sensing and high resolution latent fingerprint imaging based on fluorescent silicon quantum dots

Expanding the application of silicon based luminescent materials is a fast-growing interdisciplinary field. Herein, a novel fluorescent bifunctional probe based on silicon quantum dots (SiQDs) for highly sensitive Fe³⁺ sensing and high-resolution latent fingerprint (LFP) imaging was subtly devised. The SiQD solution was mildly prepared using 3-aminopropyl trimethoxysilane as the silicon source and sodium ascorbate as the reductant, showing green emission at 515 nm under UV irradiation with a quantum yield of 19.8%. As a highly sensitive fluorescent sensor, the SiQD was demonstrated to have a highly selective quenching with Fe³⁺ in the concentration range of 2-1000 μM with the LOD of 0.086 μM in water. The quenching rate constant and association constant of the SiQDs-Fe³⁺ complex was calculated to be 1.05 × 10¹² mol/s and 6.8 × 10³ L/mol, respectively, suggesting a static quenching effect between them. Moreover, to achieve high-resolution LFP imaging, a novel SiO₂@SiQDs composite powder was further fabricated. The SiQDs were covalently anchored on the surface of silica nanospheres to conquer aggregation-caused quenching for the high-solid fluorescence. In the demonstration of LFP imaging, this silicon based luminescent composite exhibited high developing sensitivity, high selectivity and high contrast, indicating its practical value as a fingerprint developer at crime scenes.

Aggregation-induced bimodal excitation of nitrogen-doped carbon dots for ratiometric sensing of new coccine and solid-state multicolor lighting

Trace detection of foodstuff pigments have gained increasing attention because of their close association with biological and environmental processes. Herein, we propose an innovative bimodal excitation nitrogen-doped carbon dots (N-CDs) for ratiometric sensing of new coccine (NC) pigment, which are synthesized by using melamine and o-phenylenediamine as precursors via solvothermal treatment. With the increase of the N-CDs concentration, N-CDs exhibit not only a concentration-dependent tunable color behavior, but also a novel aggregation-induced bimodal excitation phenomenon. Considering this distinctive bimodal excitation behavior, a ratiometric sensor based on N-CDs has been developed for the detection of the NC in different organic solvents due to the inner filter effect and fluorescence resonance energy transfer. The intensity ratio of two excitation signals is linear with the NC concentration in the range of 0.032-100 µM, and the limit of detection is as low as 32.1 nM. Meanwhile, we realize the design of multicolor-emission N-CDs/polymer films. All in all, this work presents a novel kind view of the mechanism of distinctive bimodal excitation of N-CDs, and further proposes an innovative ratiometric method for the screening analysis of NC in food samples and environmental pollutants.

AIEE active J-aggregates of naphthalimide based fluorescent probe for detection of Nitrobenzene: Combined experimental and theoretical approaches for Non-covalent interaction analysis

A new naphthalimide-based fluorescent probe NS with exceptional J-aggregates based aggregation-induced emission enhancement (AIEE) properties was rationally synthesized through a single-step imidation reaction. Probe NS exhibited excellent AIEE properties in aqueous media through the formation of J-aggregates with remarkable red-shift. The AIEE active probe NS was used for selective and sensitive detection of nitrobenzene (NB) based on fluorescence quenching response. Formation of J-aggregates was assessed through fluorescence titration. These J-aggregates contributed significantly to produce favorable interaction between probe NS and NB. The highly selective fluorescence detection of NB was accredited to the adjustable smaller size of NB that can easily penetrate into interstitial spaces of probe molecules. Ability of sensor to detect NB in solid state was also accomplished through solid state fluorescence spectroscopy. Nature of interaction and sensitivity of probe NS for NB has also been investigated through ¹H NMR titration and density functional theory (DFT) including non-covalent interaction (NCI), quantum theory of atom in molecule (QTAIM), electron density differences (EDD), frontier molecular orbitals (FMO) and density of states (DOS) analysis. Advantageously, probe exhibited colorimetric and vapor phase detection of NB. Moreover, probe was quite sensitive for the trace detection of NB in real samples.

The fabrication of N-doped carbon dots by methionine and their utility in sensing Cu2+ in real water

Copper ions (Cu²⁺) are ubiquitous in the ecosystem and cause serious environmental pollution, posing a threat to human health. Therefore, sensitive detection of Cu²⁺ is urgently needed. Herein, we employed a solvothermal method to prepare blue-emitting carbon dots (Met-CDs) using formamide (FA) and methionine (Met) as precursors, with a high quantum yield (QY) of 38%. Based on the good optical stability of Met-CDs and selective quenching by Cu²⁺, a sensitive probe using Met-CDs for the detection of Cu²⁺ in water was successfully designed. Within the linear range of 0.15-2 μM, the limit of detection (LOD) was determined to be as low as 47.7 nM, enabling the quantitative detection of Cu²⁺. Moreover, the recovery data of the spiked analysis of lake/river water samples were also satisfactory and verified the feasibility of the probe by the analysis of Cu²⁺ in natural conditions.

Synthesis of Visible Light Excitable Carbon Dot Phosphor-Al2 O3 Hybrids for Anti-Counterfeiting and Information Encryption

The preparation of room temperature phosphorescent carbon dots still faces great challenges, especially in the case of carbon dots endowed of visible-light excitable room temperature phosphorescence (RTP). To date, a limited number of substrates have been exploited to synthesize room temperature phosphorescent carbon dots, and most of them can emit RTP only in solid state. Here, the synthesis of a composite obtained from the calcination of green carbon dots (g-CDs) blended with aluminum hydroxide (Al(OH)₃ ) is reported. The resultant hybrid material g-CDs@Al₂ O₃ exhibits blue fluorescence and green RTP emissions in an on/off switch process at 365 nm. Notably, this composite manifests strong resistance to extreme acid and basic conditions up to 30 days of treatment. The dense structure of Al₂ O₃ formed by calcination contributes to the phosphorescent emission of g-CDs. Surprisingly, g-CDs@Al₂ O₃ can also emit yellow RTP under irradiation with white light. The multicolor emissions can be employed for anti-counterfeiting and information encryption. This work provides a straightforward approach to produce room temperature phosphorescent carbon dots for a wide range of applications.

Rationally Designed Matrix-Free Carbon Dots with Wavelength-Tunable Room-Temperature Phosphorescence

We report the rational design of the matrix-free carbon dots (C-dots) with long wavelength and wavelength-tunable room-temperature phosphorescence (RTP). Taking advantage of microwave-assisted heating treatment, three RTP C-dots in boric acid (BA) composites are synthesized by using diethylenetriaminepentakis (methylphosphonic acid) as a multiple-sites crosslink agent, a moderately acid catalyst and P source; phenylenediamines (either o-PD, m-PD, or p-PD, respectively) as building block while BA as a carbonization-retardant matrix. After the water-soluble BA matrix is removed by dialysis, three matrix-free C-dots are obtained with RTP emission at 540, 550 and 570 nm under an excitation wavelength of 365 nm. Alterations of RTP emission of three matrix-free C-dots are ascribed to the difference in their particle size and band gap from n-π* transition. Furthermore, the application of three matrix-free C-dots are successfully performed in information encryption and decryption.

Facile synthesis of non-modified yellow emission silicon quantum dots and their visualization of hydrogen sulfide in living cells and onion tissues

Yellow fluorescent silicon quantum dots (y-SiQDs) with 22.2% fluorescence quantum yield were synthesized by a simple hydrothermal method using 3-glycidoxypropyl triethoxysilane (GOTS) and m-aminophenol. The excitation wavelength is 550 nm with an emission wavelength of 574 nm, which effectively avoids the interference of biological autofluorescence. Notably, the synthesis approach does not require any post-modification and the y-SiQDs can be directly used for hydrogen sulfide (H₂S) quantification due to static quenching. It exhibits high sensitivity and excellent selectivity for H₂S with a 0.2-10 μM (R² = 0.9953) linear range and detection limit of 54 nM. y-SiQDs have excellent stability and biocompatibility and can be used for H₂S imaging in living cells and onion tissues.

Turn on fluorescence detection of curcumin in food matrices by the novel fluorescence sensitizer

In this study, silane reagents were for the first time explored as the fluorescence sensitizer. They were demonstrated to have fluorescence sensitization effect on curcumin and 3-glycidoxypropyltrimethoxysilane (GPTMS) possessed the strongest effect. Thus, GPTMS was adopted as the novel fluorescence sensitizer to turn on the fluorescence of curcumin by more than two orders of magnitude for detection. In this way, curcumin could be determined with a linear range of 0.2-2000 ng/mL and an LOD of 0.067 ng/mL. The method was applicable to determine curcumin in several actual food samples, which had the good consistency with the high performance liquid chromatographic method, demonstrating the high accuracy of the proposed method. In addition, the curcumins sensitized by GPTMS could be cured under certain conditions and held the potential for solid fluorescence application. This study expanded the scope of fluorescence sensitizer to silane reagents, and provided the novel approach for fluorescence detection of curcumin and further to generate new solid fluorescence system.

Critical Review on Nutritional, Bioactive, and Medicinal Potential of Spices and Herbs and Their Application in Food Fortification and Nanotechnology

Medicinal or herbal spices are grown in tropical moist evergreen forestland, surrounding most of the tropical and subtropical regions of Eastern Himalayas in India (Sikkim, Darjeeling regions), Bhutan, Nepal, Pakistan, Iran, Afghanistan, a few Central Asian countries, Middle East, USA, Europe, South East Asia, Japan, Malaysia, and Indonesia. According to the cultivation region surrounded, economic value, and vogue, these spices can be classified into major, minor, and colored tropical spices. In total, 24 tropical spices and herbs (cardamom, black jeera, fennel, poppy, coriander, fenugreek, bay leaves, clove, chili, cassia bark, black pepper, nutmeg, black mustard, turmeric, saffron, star anise, onion, dill, asafoetida, celery, allspice, kokum, greater galangal, and sweet flag) are described in this review. These spices show many pharmacological activities like anti-inflammatory, antimicrobial, anti-diabetic, anti-obesity, cardiovascular, gastrointestinal, central nervous system, and antioxidant activities. Numerous bioactive compounds are present in these selected spices, such as 1,8-cineole, monoterpene hydrocarbons, γ-terpinene, cuminaldehyde, trans-anethole, fenchone, estragole, benzylisoquinoline alkaloids, eugenol, cinnamaldehyde, piperine, linalool, malabaricone C, safrole, myristicin, elemicin, sinigrin, curcumin, bidemethoxycurcumin, dimethoxycurcumin, crocin, picrocrocin, quercetin, quercetin 4'-O-β-glucoside, apiol, carvone, limonene, α-phellandrene, galactomannan, rosmarinic acid, limonene, capsaicinoids, eugenol, garcinol, and α-asarone. Other than that, various spices are used to synthesize different types of metal-based and polymer-based nanoparticles like zinc oxide, gold, silver, selenium, silica, and chitosan nanoparticles which provide beneficial health effects such as antioxidant, anti-carcinogenic, anti-diabetic, enzyme retardation effect, and antimicrobial activity. The nanoparticles can also be used in environmental pollution management like dye decolorization and in chemical industries to enhance the rate of reaction by the use of catalytic activity of the nanoparticles. The nutritional value, phytochemical properties, health advantages, and both traditional and modern applications of these spices, along with their functions in food fortification, have been thoroughly discussed in this review.

Synthesis and characterization of folate-functionalized silica-based materials and application for bioimaging of cancer cells

Early-stage detection is a vital factor in the later treatment and prognosis of cancer. Enhancing the sensitivity and specificity of the cancer detection pathological and experimental approaches can affect the morbidity and mortality of this disease. A folic acid (FA)-functionalized silica quantum dots (SiQDs)/KCC-NH₂@SiO₂ nanomaterials were synthesized and characterized as a bioimaging agent of the MCF 7 cancer cells. These nanoparticles showed biocompatible nature with specificity towards folate receptor (FR)-overexpressed MCF 7 cancer cells. Viability findings suggested that the SiQDs/KCC-NH₂@SiO₂/FA nanomaterials have nontoxic nature towards the cells in the concentration of 200 μg/mL. Fluorescence microscopy images were utilized to estimate the cell internalization of the nanoparticles and further verified by the flow cytometry technique. The differentiation ability of the nanoparticles was also approved by incubation with FR-negative HEK 293 normal cells. The SiQDs/KCC-NH₂@SiO₂/FA nanoparticle exhibited high stability, bright and high quantum yield fluorescence emission, proposing as a high-quality material for in vivo bioimaging of FR-overexpressed circulating tumoral cancer cells (CTCs).

Carbon dot-based molecularly imprinted fluorescent nanopomegranate for selective detection of quinoline in coking wastewater

Quinoline, as a refractory and toxic organic pollutant in coking wastewater, causes great harm to the environment and human health even in trace amount. To realize the selective and sensitive detection of quinoline in coking wastewater, a novel molecularly imprinted fluorescent nanopomegranate with carbon dots (CDs) as seeds and fluorescence source (CD-MIP) was prepared, using quinoline as the template, and N-(β-aminoethyl)-γ-aminopropyl trimethoxysilane (KH792) as the monomer. The preparation and detection conditions of CD-MIP were systematically optimized. The structure and detection performance of CD-MIP were investigated in detail. The resulting CD-MIP exhibits excellent photoluminescence performance, high detection sensitivity, good selectivity and reproducibility towards quinoline. Under the optimized conditions, the fluorescence intensity of CD-MIP shows a satisfying linearity with quinoline concentration in the range of 20-200 mg/L with a detection limit of 6.7 mg/L. Owing to the existence of imprinted cavities that highly match with quinoline, a high imprinting factor (3.46) for CD-MIP was obtained. In addition, CD-MIP represents a greater affinity towards quinoline than towards other analogues, as well as an outstanding anti-interference capability. For trace analysis in real coking wastewater, CD-MIP also gives satisfactory results. Therefore, CD-MIP shows promising application in the selective detection of trace quinoline in wastewater.

pH-Responsive strips integrated with resazurin and carbon dots for monitoring shrimp freshness

Carbon dots (CDs) were synthesized via a one-step hydrothermal approach using tangerine peel (Tan) and resazurin (Res) to fabricate biocompatible indicators for food freshness. The CDs' pH-responsive mechanism, morphology, zeta potential, XPS, and optical and fluorescence analysis were investigated. The as-prepared tangerine peel/resazurin carbon dots (Tan/Res CDs) exhibited pH-responsive emission that changed from yellow to orange as the pH value increased. The Tan/Res CDs showed the sensing ability of ammonia with a detection limit of 0.84 μM by proportionally losing fluorescence intensity as the concentration increased from 1 to 100 μM. The CDs were coated onto paper strips to impart biogenic amine (BAs) detection for pH-responsive intelligent monitoring of packaged foods. The Tan/Res CDs paper-based indicator exhibited an impressive color change from yellow to brown during the detection of ammonia vapor. The indicator also showed the ability to detect BAs through a color change, demonstrating the ability to monitor the freshness of shrimp in situ. Additionally, the efficacy of the Tan/Res CDs indicator is validated by total volatile basic nitrogen (TVB-N), providing customers and suppliers with a simple, inexpensive, and portable tool to monitor the freshness of seafood in real-time.

Surface decorated quantum dots: Synthesis, properties and role in herbal therapy

Quantum dots are the serendipitous outcome of materials research. It is the tiny carbonaceous nanoparticles with diameters ranging from 1 to 10 nm. This review is a brief discussion of the synthesis, properties, and biomedical applicability of quantum dots, especially in herbal therapy. As quantum dots are highly polar, they can be surface decorated with several kinds of polar functionalities, such as polymeric molecules, small functional molecules, and so on. The review also consists of the basic physical and optical properties of quantum dots and their excitation-dependent properties in the application section. We focus on therapeutics, where quantum dots are used as drugs or imaging probes. Nanoprobes for several diagnostics are quite new in the biomedical research domain. Quantum dot-based nanoprobes are in high demand due to their excellent fluorescence, non-bleaching nature, biocompatibility, anchoring feasibility for several analytes, and fast point-of-care sensibility. Lastly, we also included a discussion on quantum dot-based drug delivery as phytomedicine.

Multifunctional Carbon Dots-Based Fluorescence Detection for Sudan I, Sudan IV and Tetracycline Hydrochloride in Foods

Sudan dyes are strictly prohibited from being added to edible products as carcinogens and tetracycline hydrochloride (TC) remaining in animal-derived food may cause harm to the human body. Therefore, it is necessary to establish a high-sensitivity, simple and convenient method for the detection of Sudan dyes and TC in foods for safety purposes. In this work, multifunctional blue fluorescent carbon dots (B-CDs) were prepared by a one-step hydrothermal synthesis using glucose as the carbon source. The results show that the fluorescence intensity of B-CDs was significantly affected by the acidity of the solution and can be quenched by Sudan I, IV and TC through selective studies. Interestingly, the fluorescence quenching intensities of B-CDs have a good linear relationship with the concentration of Sudan I and IV at pH = 3-7. The wide range of pH is beneficial to broaden the application of B-CDs in a practical samples analysis. The method has been successfully applied to real food samples of tomato paste, palm oil and honey, and the detection limits are 26.3 nM, 54.2 nM and 31.1 nM for Sudan I, Sudan IV and TC, respectively. This method integrates Sudan dyes and TC into the same multifunctional B-CDs, which shows that the sensor has a great potential in food safety detection.

One-step synthesis of highly fluorescent carbon dots as fluorescence sensors for the parallel detection of cadmium and mercury ions

Cadmium (Cd2+) and mercury ions (Hg2+) are essential for the quality control of food samples because of their serious toxicity to human health, but the effective and simple strategy for their parallel detection remains challenging. In this paper, a rapid and simple parallel detection method for Cd2+ and Hg2+ was developed using carbon dots (CDs) as fluorescent sensors. A one-step hydrothermal method with a single precursor l-arginine as both the carbon and nitrogen sources was employed to prepare nitrogen-doped CDs (N-CDs). N-CDs exhibited a uniform particle size and excitation-independent fluorescence emission. The maximum emission wavelength of N-CDs was observed at 354 nm with the excitation wavelength at 295 nm. The quantum yield of N-CDs reached as high as 71.6% in water. By using sodium diphosphate and phytic acid as masking agents, the fluorescent sensor can be quenched by Cd2+ and Hg2+ in the linear range of 0–26.8 μM and 0–49.9 μM within 5 min. Other common ions in farm products showed no significant effect on the fluorescence intensity of the sensing system. The results demonstrated that the sensing system had good selectivity and sensitivity for Cd2+ and Hg2+. The detection limits for Cd2+ and Hg2+ were 0.20 and 0.188 μM, respectively. In addition, the fluorescent sensor had been successfully applied for the detection of Cd2+ and Hg2+ in fruits and vegetables, and the recoveries were 86.44–109.40% and 86.62–115.32%, respectively. The proposed fluorescent sensor provides a rapid, simple, and sensitive detection method for Cd2+ and Hg2+ in food samples and thus a novel quantitative detection method for heavy metal ions in foods.

Schiff Base Aggregation-Induced Emission Luminogens for Sensing Applications: A Review

Fluorescence sensing can not only identify a target substrate qualitatively but also achieve the purpose of quantitative detection through the change of the fluorescence signal. It has the advantages of immense sensitivity, rapid response, and excellent selectivity. The proposed aggregation-induced emission (AIE) concept solves the problem of the fluorescence of traditional fluorescent molecules becoming weak or quenched in high concentration or aggregated state conditions. Schiff base fluorescent probes have the advantages of simple synthesis, low toxicity, and easy design. They are often used for the detection of various substances. In this review we cover late developments in Schiff base compounds with AIE characteristics working as fluorescence sensors.

Response surface methodology optimization for the synthesis of N, S-codoped carbon dots and its application for tetracyclines detection

In this study, using a convenient one-pot microwave-assisted method, we rapidly fabricated a N, S-codoped fluorescent carbon dots (NSCDs) through using citric acid (CA) and _d-penicillamine (DPA) for the detection of tetracyclines (TC). To rapidly and efficiently optimize the various synthesis parameters and significantly decrease the number of experimental runs, the effect of the synthesis factors on quantum yield (QY) by NSCDs was implemented through means of response surface methodology (RSM). The as-synthesized NSCDs presented superior photoluminescence stability with a strong quantum yield (QY) of 91.55% under optimal conditions, which was consistent with the predicted value using RSM. The fluorescence intensity of the NSCDs could be quenched effectively after adding TC by the inner filter effect (IEE) and photoinduced electron transfer (PET). Thus, the determination of TC by using NSCDs as a facile fluorescent probe was constructed in the range of 0.2-70 μM with a limit detection of 0.072 μM. Moreover, this detection approach has been utilized to detect TC in actual samples with satisfactory results.

One step synthesis of ultra-high quantum yield fluorescent carbon dots for "on-off-on" detection of Hg2+ and biothiols

In this paper, the carbon dots (CDs) with strong blue fluorescence were synthesized through hydrothermal method, which using folic acid, ammonium citrate and ethylenediamine as precursors. The prepared CDs with a high absolute quantum yield of 81.94% and showed excellent stability in high concentration salt solution and different pH conditions. With the addition of Hg²⁺, the signal of CDs was selectively quenched. At the same time, the CDs-Hg²⁺ system could be recovered after the introduction of biothiols. Moreover, the fluorescence of CDs showed a good linear relationship with Hg²⁺ (1-15 µM), and the detection limit as low as 0.08 µM. In addition, the prepared CDs with low toxicity could be used to detect Hg²⁺ in living cells and actual water samples.

Carbon dots for multicolor cell imaging and ultra-sensitive detection of multiple ions in living cells: One Stone for multiple Birds

Given the significant impact of ions on environment pollution and human health, it is urgently needed to establish effective and convenient ion detection approaches, particularly in living cells. In this paper, we constructed multicolor N-doped-carbon dots (mPD-CDs) by facile one-step hydrothermal carbonization of m-phenylenediamine (mPD). mPD-CDs were successfully deployed for multicolor cellular imaging for animal cells, fungi, and bacteria in a wash-free way with high photostability and satisfactory biocompability. Moreover, mPD-CDs can be used as a fluorescent sensing probe for ultrasensitive detection of both iodide ion (I^-) and typical heavy metals such as cadmium (Cd²⁺), copper (Cu²⁺), mercury (Hg²⁺), gadolinium (Gd³⁺), ferrous ion (Fe²⁺), Zinc (Zn²⁺), and ferric ion (Fe³⁺). This is the first report using CDs as optical sensing probe for the detection of Gd³⁺, and for detection of Fe³⁺ with fluorescence "turn on". More significantly, with these versatile and fascinating properties, we applied mPD-CDs for intracellular ion detection in living cells like Hep G2 and S. cerevisiae, and zebra fish. Altogether, mPD-CDs displayed great potential for multicolor cell imaging and the multiple ion detection in vitro and in vivo, presenting a promising strategy for in-situ ultrasensitive sensing of multiple metal ions in the environment and the biological systems.

Preparation of novel fluorescent probe based on carbon dots for sensing and imaging Fe(III) and pyrophosphate in cells and zebrafish

Ferric ions (Fe³⁺) and pyrophosphate anions (PPi) are involved in many physiological processes and play important roles in biological systems. The abnormal level of Fe³⁺ and PPi will cause serious damage to the environment and life. At present, the application of such probes in life, especially in vivo, is still very scarce. So, the development of a fluorescent probe to simultaneously detect Fe³⁺ and PPi has great significance to the health of the environment and organisms. Herein, nitrogen-doped carbon quantum dots (N-CDs) were synthesized via solvothermal treatment, using biuret and citric acid as precursors. The synthesized N-CDs showed highly selective and sensitive detection of Fe³⁺ through a photoluminescence quenching effect. The fluorescence of N-CDs quenched by Fe³⁺ could be restored with PPi, rendering the N-CDs/Fe³⁺ sensor promising for PPi detection ('OFF-ON'). The linear ranges of detection for Fe³⁺ and PPi were 3-30 and 2-12 μM, and the limits of detection were 2.71 and 1.12 μM, respectively. The practical applications of N-CDs were tested using tap water samples. Furthermore, N-CDs can be used for the detection and imaging of Fe³⁺ and PPi in HeLa cells and zebrafish owing to their excellent optical properties.

Bifunctional Nitrogen and Fluorine Co-Doped Carbon Dots for Selective Detection of Copper and Sulfide Ions in Real Water Samples

Copper ions (Cu²⁺) and sulfur ions (S²⁻) are important elements widely used in industry. However, these ions have the risk of polluting the water environment. Therefore, rapid and quantitative detection methods for Cu²⁺ and S²⁻ are urgently required. Using 2,4-difluorobenzoic acid and L-lysine as precursors, nitrogen and fluorine co-doped dots (N, F-CDs) were synthesized in this study via a hydrothermal method. The aqueous N, F-CDs showed excellent stability, exhibited satisfactory selectivity and excellent anti-interference ability for Cu²⁺ detection. The N, F-CDs, based on the redox reactions for selective and quantitative detection of Cu²⁺, showed a wide linear range (0–200 μM) with a detection limit (215 nM). By forming the N, F-CDs@Cu²⁺ sensing platform and based on the high affinity of S²⁻ to Cu²⁺, the N, F-CDs@Cu²⁺ can specifically detect S²⁻ over a linear range of 0–200 μM with a detection limit of 347 nM. In addition, these fluorescent probes achieved good results when used for Cu²⁺ and S²⁻ detection in environmental water samples, implying the good potential for applications.

Green-emission nitrogen-doped carbon quantum dots from alkaline N-methyl-2-pyrrolidinone for determination of β-galactosidase and its inhibitors

A new fluorescence method was established for sensitive detection of β-galactosidase (β-gal) activity in spiked human serum and screening of inhibitor. Nitrogen-doped carbon quantum dots (N-CQDs) were prepared by solvothermal polymerization of N-methyl-2-pyrrolidinone in an alkaline condition. The colloidal N-CQDs exhibit good water solubility, stability, and emit bright green fluorescence with a maximum emission peak at 528 nm upon excitation at 420 nm. β-gal specifically catalyzes the decomposition of its substrate P-nitrophenyl-β-D-galactopyranoside into 4-nitrophenol, whose absorption spectrum overlaps well with the excitation spectrum of the N-CQDs. As a result, the fluorescence of the N-CQDs is remarkably quenched by 4-nitrophenol via an inner filter effect. The sensing platform presents a linear response range for β-gal activity from 0.05 to 3.0 U·L^-1 with a low limit of detection of 0.023 U·L^-1. An acceptable precision is obtained with a relative standard deviation (RSD) of 3.1% for 1.0 U·L^-1 β-gal (n = 11). The method was applied to determine β-gal in spiked human serums with recoveries in the range  96.3-104.7%. The method was employed to evaluate inhibitor screening with D-galactal and chloroquine diphosphate as models.

A Review on Carbon Dots: Synthesis, Characterization and Its Application in Optical Sensor for Environmental Monitoring

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

Biocompatible Carbon Dot Decorated α-FeOOH Nanohybrid for an Effective Fluorometric Sensing of Cr (VI) in Wastewater and Living Cells

This article reports the fluorometric detection of toxic hexavalent chromium Cr (VI)) in wastewater and Cr (VI) contaminated living cells using in-situ grown carbon quantum dots into the goethite (α-FeOOH) nano-matrix. The synthesized nano-hybrid shows enormous potential in determining the chromium contamination levels in various types of water samples. This selective fluorometric probe is enormously sensitive (LOD 81 nM) toward hexavalent chromium, which makes it a dedicated chromium sensor. Moreover, the sensing mechanism has been assessed using Stern-Volmer's equation and fluorescence lifetime experiments showing the simultaneous occurrence of photoinduced electron transfer and the inner filter effect. This chromium sensor has also been employed to assess the contamination level in real-life industrial wastewater. The performance of this probe in a real-life wastewater sample is quite commendable. Further, this biocompatible fluorometric probe has been used to demonstrate the in-vitro sensing of Cr (VI) in HeLa cells. The rapid detection mechanism of hexavalent chromium in living cells has been validated using theoretical docking simulations. Henceforth, this fluorometric sensor material could open new avenues not only in wastewater monitoring but also in biomedical applications.