Biophysical signals controlling cell fate decisions: How do stem cells really feel?

Adaptation of Bacillus subtilis MreB Filaments to Osmotic Stress Depends on Influx of Potassium Ions

The circumferential motion of MreB filaments plays a key role in cell shape maintenance in many bacteria. It has recently been shown that filament formation of MreB filaments in Bacillus subtilis is influenced by stress conditions. In response to osmotic upshift, MreB molecules were released from filaments, as seen by an increase in freely diffusive molecules, and the peptidoglycan synthesis pattern became less organized, concomitant with slowed-down cell extension. In this study, biotic and abiotic factors were analysed with respect to a possible function in the adaptation of MreB filaments to stress conditions. We show that parallel to MreB, its interactor RodZ becomes more diffusive following osmotic stress, but the remodeling of MreB filaments is not affected by a lack of RodZ. Conversely, mutant strains that prevent efficient potassium influx into cells following osmotic shock show a failure to disassemble MreB filaments, accompanied by less perturbed cell wall extension than is observed in wild type cells. Because potassium ions are known to negatively affect MreB polymerization in vitro, our data indicate that polymer disassembly is directly mediated by the physical consequences of the osmotic stress response. The lack of an early potassium influx response strongly decreases cell survival following stress application, suggesting that the disassembly of MreB filaments may ensure slowed-down cell wall extension to allow for efficient adaptation to new osmotic conditions.

The Pressurized Skin: A Review on the Pathological Effect of Mechanical Pressure on the Skin from the Cellular Perspective

Since human skin is the primary interface responding to external mechanical stimuli, extrinsic forces can disrupt its balanced microenvironment and lead to cutaneous lesions. We performed this review to delve into the pathological effects of mechanical pressure on skin from the cellular perspective. Fibroblasts of different subsets act as heterogeneous responders to mechanical load and express diverse functionalities. Keratinocytes relay mechanical signals through mechanosensitive receptors and the ensuing neurochemical cascades to work collaboratively with other cells and molecules in response to pressure. Mast cells release cytokines and neuropeptides, promoting inflammation and facilitating interaction with sensory neurons, while melanocytes can be regulated by pressure through cellular and molecular crosstalk. Adipocytes and stem cells sense pressure to fine-tune their regulations of mechanical homeostasis and cell differentiation. Applying mechanical pressure to the skin can induce various changes in its microenvironment that potentially lead to pathological alterations, such as ischemia, chronic inflammation, proliferation, regeneration, degeneration, necrosis, and impaired differentiation. The heterogeneity of each cellular lineage and subset from different individuals with various underlying skin conditions must be taken into consideration when discussing the pathological effects of pressure on the skin. Thus, elucidating the mechanotransduction and mechanoresponsive pathways from the cellular viewpoint is crucial in diagnosing and managing relevant dermatological disorders.

Role and Mechanism of a Micro-/Nano-Structured Porous Zirconia Surface in Regulating the Biological Behavior of Bone Marrow Mesenchymal Stem Cells

Zirconia as a promising dental implant material has attracted much attention in recent years. Improving the bone binding ability of zirconia is critical for clinical applications. Here, we established a distinct micro-/nano-structured porous zirconia through dry-pressing with addition of pore-forming agents followed by hydrofluoric acid etching (POROHF). Porous zirconia without hydrofluoric acid treatment (PORO), sandblasting plus acid-etching zirconia, and sintering zirconia surface were applied as controls. After human bone marrow mesenchymal stem cells (hBMSCs) were seeded on these four groups of zirconia specimens, we observed the highest cell affinity and extension on POROHF. In addition, the POROHF surface displayed an improved osteogenic phenotype in contrast to the other groups. Moreover, the POROHF surface facilitated angiogenesis of hBMSCs, as confirmed by optimal stimulation of vascular endothelial growth factor B and angiopoietin 1 (ANGPT1) expression. Most importantly, the POROHF group demonstrated the most obvious bone matrix development in vivo. To investigate further the underlying mechanism, RNA sequencing was employed and critical target genes modulated by POROHF were identified. Taken together, this study established an innovative micro-/nano-structured porous zirconia surface that significantly promoted osteogenesis and investigated the potential underlying mechanism. Our present work will improve the osseointegration of zirconia implants and help further clinical applications.

Biophysics at the edge of life and death: radical control of apoptotic mechanisms

Recent studies have furthered our understanding of how dying and living cells interact in different physiological contexts, however the signaling that initiates and mediates apoptosis and apoptosis-induced proliferation are more complex than previously thought. One increasingly important area of study is the biophysical control of apoptosis. In addition to biochemical regulation, biophysical signals (including redox chemistry, bioelectric gradients, acoustic and magnetic stimuli) are also known yet understudied regulators of both cell death and apoptosis-induced proliferation. Mounting evidence suggests biophysical signals may be key targets for therapeutic interventions. This review highlights what is known about the role of biophysical signals in controlling cell death mechanisms during development, regeneration, and carcinogenesis. Since biophysical signals can be controlled spatiotemporally, bypassing the need for genetic manipulation, further investigation may lead to fine-tuned modulation of apoptotic pathways to direct desired therapeutic outcomes.

Nuclear mechanoprotection: From tissue atlases as blueprints to distinctive regulation of nuclear lamins

Two meters of DNA in each of our cells must be protected against many types of damage. Mechanoprotection is increasingly understood to be conferred by the nuclear lamina of intermediate filament proteins, but very different patterns of expression and regulation between different cells and tissues remain a challenge to comprehend and translate into applications. We begin with a tutorial style presentation of "tissue blueprints" of lamin expression including single-cell RNA sequencing in major public datasets. Lamin-A, C profiles appear strikingly similar to those for the mechanosensitive factors Vinculin, Yap1, and Piezo1, whereas datasets for lamin-B1 align with and predict regulation by the cell cycle transcription factor, FOXM1, and further predict poor survival across multiple cancers. Various experiments support the distinction between the lamin types and add mechanistic insight into the mechano-regulation of lamin-A, C by both matrix elasticity and externally imposed tissue strain. Both A- and B-type lamins, nonetheless, protect the nucleus from rupture and damage. Ultimately, for mechanically active tissue constructs and organoids as well as cell therapies, lamin levels require particular attention as they help minimize nuclear damage and defects in a cell cycle.

Intrinsic Mechanical Cues and Their Impact on Stem Cells and Embryogenesis

Although understanding how soluble cues direct cellular processes revolutionised the study of cell biology in the second half of the 20th century, over the last two decades, new insights into how mechanical cues similarly impact cell fate decisions has gained momentum. During development, extrinsic cues such as fluid flow, shear stress and compressive forces are essential for normal embryogenesis to proceed. Indeed, both adult and embryonic stem cells can respond to applied forces, but they can also detect intrinsic mechanical cues from their surrounding environment, such as the stiffness of the extracellular matrix, which impacts differentiation and morphogenesis. Cells can detect changes in their mechanical environment using cell surface receptors such as integrins and focal adhesions. Moreover, dynamic rearrangements of the cytoskeleton have been identified as a key means by which forces are transmitted from the extracellular matrix to the cell and vice versa. Although we have some understanding of the downstream mechanisms whereby mechanical cues are translated into changes in cell behaviour, many of the signalling pathways remain to be defined. This review discusses the importance of intrinsic mechanical cues on adult cell fate decisions, the emerging roles of cell surface mechano-sensors and the cytoskeleton in enabling cells to sense its microenvironment, and the role of intracellular signalling in translating mechanical cues into transcriptional outputs. In addition, the contribution of mechanical cues to fundamental processes during embryogenesis such as apical constriction and convergent extension is discussed. The continued development of tools to measure the biomechanical properties of soft tissues in vivo is likely to uncover currently underestimated contributions of these cues to adult stem cell fate decisions and embryogenesis, and may inform on regenerative strategies for tissue repair.

Hypertonic pressure affects the pluripotency and self-renewal of mouse embryonic stem cells

As an important mechanical cue in the extracellular microenvironment, osmotic stress directly affects the proliferation, migration, and differentiation of cells. In this paper, we focused on the influence of hypertonic pressure on the colony morphology, stemness, and self-renew of mouse embryonic stem cells (mESCs). Our results showed that culture media with hypertonic pressure are more conducive to the maintenance of 3D colony morphology and pluripotency of mESCs after withdrawing the glycogen synthase kinase 3β (GSK3β) inhibitor CHIR99021 and the mitogen-activated protein kinase (MEK) inhibitor PD0325901 (hereinafter referred to as 2i) for 48 h. Furthermore, we revealed the microscopic mechanisms of the this finding: hypertonic pressure resulted in the depolymerization of F-actin cytoskeleton and limits Yes-associated protein (hereinafter referred to as YAP) transmission into the nucleus which play a vital role in the regulation of cell proliferation, and resulting in cell-cycle arrest at last.

Three-dimensional bioprinting of a full-thickness functional skin model using acellular dermal matrix and gelatin methacrylamide bioink

Treatment of full-thickness skin defects still presents a significant challenge in clinical practice. Three-dimensional (3D) bioprinting technique offers a promising approach for fabricating skin substitutes. However, it is necessary to identify bioinks that have both sufficient mechanical properties and desirable biocompatibilities. In this study, we successfully fabricated acellular dermal matrix (ADM) and gelatin methacrylamide (GelMA) bioinks. The results demonstrated that ADM preserved the main extracellular matrix (ECM) components of the skin and GelMA had tunable mechanical properties. Both bioinks with shear-thinning properties were suitable for 3D bioprinting and GelMA bioink exhibited high printability. Additionally, the results revealed that 20% GelMA with sufficient mechanical properties was suitable to engineer epidermis, 1.5% ADM and 10% GelMA displayed relatively good cytocompatibilities. Here, we proposed a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with human umbilical vein endothelial cells (HUVECs) as the vascular network and framework. We demonstrated that this 3D bioprinting functional skin model (FSM) could not only promote cell viability and proliferation, but also support epidermis reconstruction in vitro. When transplanted in vivo, the FSM could maintain cell viability for at least 1 week. Furthermore, the FSM promoted wound healing and re-epithelization, stimulated dermal ECM secretion and angiogenesis, and improved wound healing quality. The FSM may provide viable functional skin substitutes for future clinical applications. STATEMENT OF SIGNIFICANCE: We propose a new 3D structure to simulate natural full-thickness skin, which included 20% GelMA with HaCaTs as an epidermal layer, 1.5% ADM with fibroblasts as the dermis, and 10% GelMA mesh with HUVECs as the vascular network. It could not only maintain a moist microenvironment and barrier function, but also recreate the natural skin microenvironment to promote cell viability and proliferation. This may provide viable functional skin substitutes for future clinical applications.

Heterogeneous role of integrins in fibroblast response to small cyclic mechanical stimulus generated by a nanoporous gold actuator

It is important to understand the effects of mechanical stimulation on cell behaviors for homeostasis. Many studies have been performed on cell responses to mechanical stimuli, but the mechanosensing mechanism is still under debate. In the present study, experiments employing molecular dynamics (MD) simulations concerning the effects of cyclic mechanical stimulus on cell proliferation were performed based on the hypothesis that mechanosensing depends on integrin types. We used a nanoporous gold (NPG) actuator to prevent transfer of a mechanical stimulus via molecules other than integrins. Surprisingly, a small cyclic strain of only 0.5% enhanced the proliferation of fibroblasts. α₅β₁ and α_vβ₃ integrins showed high sensitivity to the mechanical stimulus, whereas α₁β₁ and α₂β₁ integrins exhibited low mechanosensitivity. The MD simulations showed that different conformational changes of the integrin headpiece induced by binding to the ECM led to a difference in mechanosensitivity between αI and αI-less integrin types. Thus, the present study provides evidence to support the hypothesis and suggests the mechanism for the heterogeneous roles of integrins in mechanosensing.

A nonlinear elastic description of cell preferential orientations over a stretched substrate

The active response of cells to mechanical cues due to their interaction with the environment has been of increasing interest, since it is involved in many physiological phenomena, pathologies, and in tissue engineering. In particular, several experiments have shown that, if a substrate with overlying cells is cyclically stretched, they will reorient to reach a well-defined angle between their major axis and the main stretching direction. Recent experimental findings, also supported by a linear elastic model, indicated that the minimization of an elastic energy might drive this reorientation process. Motivated by the fact that a similar behaviour is observed even for high strains, in this paper we address the problem in the framework of finite elasticity, in order to study the presence of nonlinear effects. We find that, for a very large class of constitutive orthotropic models and with very general assumptions, there is a single linear relationship between a parameter describing the biaxial deformation and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\cos ^2\theta _{\mathrm{eq}}$$\end{document}cos2θeq, where \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\theta _{\mathrm{eq}}$$\end{document}θeq is the orientation angle of the cell, with the slope of the line depending on a specific combination of four parameters that characterize the nonlinear constitutive equation. We also study the effect of introducing a further dependence of the energy on the anisotropic invariants related to the square of the Cauchy–Green strain tensor. This leads to departures from the linear relationship mentioned above, that are again critically compared with experimental data.

Bioinstructive Micro-Nanotextured Zirconia Ceramic Interfaces for Guiding and Stimulating an Osteogenic Response In Vitro

Osseous implantology’s material requirements include a lack of potential for inducing allergic disorders and providing both functional and esthetic features for the patient’s benefit. Despite being bioinert, Zirconia ceramics have become a candidate of interest to be used as an alternative to titanium dental and cochlear bone-anchored hearing aid (BAHA) implants, implying the need for endowing the surface with biologically instructive properties by changing basic parameters such as surface texture. Within this context, we propose anisotropic and isotropic patterns (linear microgroove arrays, and superimposed crossline microgroove arrays, respectively) textured in zirconia substrates, as bioinstructive interfaces to guide the cytoskeletal organization of human mesenchymal stem cells (hMSCs). The designed textured micro-nano interfaces with either steep ridges and microgratings or curved edges, and nanoroughened walls obtained by direct femtosecond laser texturing are used to evaluate the hMSC response parameters and osteogenic differentiation to each topography. Our results show parallel micro line anisotropic surfaces are able to guide cell growth only for the steep surfaces, while the curved ones reduce the initial response and show the lowest osteogenic response. An improved osteogenic phenotype of hMSCs is obtained when grown onto isotropic grid/pillar-like patterns, showing an improved cell coverage and Ca/P ratio, with direct implications for BAHA prosthetic development, or other future applications in regenerating bone defects.

Mechanical Roles of F-Actin in the Differentiation of Stem Cells: A Review

In the development and differentiation of stem cells, mechanical forces associated with filamentous actin (F-actin) play a crucial role. The present review aims to reveal the relationship among the chemical components, microscopic structures, mechanical properties, and biological functions of F-actin. Particular attention is given to the functions of the cytoplasmic and nuclear microfilament cytoskeleton and their regulation mechanisms in the differentiation of stem cells. The distributions of different types of actin monomers in mammal cells and the functions of actin-binding proteins are summarized. We discuss how the fate of stem cells is regulated by intra/extracellular mechanical and chemical cues associated with microfilament-related proteins, intercellular adhesion molecules, etc. In addition, we also address the differentiation-induced variation in the stiffness of stem cells and the correlation between the fate and geometric shape change of stem cells. This review not only deepens our understanding of the biophysical mechanisms underlying the fates of stem cells under different culture conditions but also provides inspirations for the tissue engineering of stem cells.

Uniaxial Cyclic Tensile Stretching at 8% Strain Exclusively Promotes Tenogenic Differentiation of Human Bone Marrow-Derived Mesenchymal Stromal Cells

The present study was conducted to establish the amount of mechanical strain (uniaxial cyclic stretching) required to provide optimal tenogenic differentiation expression in human mesenchymal stromal cells (hMSCs) in vitro, in view of its potential application for tendon maintenance and regeneration. Methods. In the present study, hMSCs were subjected to 1 Hz uniaxial cyclic stretching for 6, 24, 48, and 72 hours; and were compared to unstretched cells. Changes in cell morphology were observed under light and atomic force microscopy. The tenogenic, osteogenic, adipogenic, and chondrogenic differentiation potential of hMSCs were evaluated using biochemical assays, extracellular matrix expressions, and selected mesenchyme gene expression markers; and were compared to primary tenocytes. Results. Cells subjected to loading displayed cytoskeletal coarsening, longer actin stress fiber, and higher cell stiffness as early as 6 hours. At 8% and 12% strains, an increase in collagen I, collagen III, fibronectin, and N-cadherin production was observed. Tenogenic gene expressions were highly expressed (p < 0.05) at 8% (highest) and 12%, both comparable to tenocytes. In contrast, the osteoblastic, chondrogenic, and adipogenic marker genes appeared to be downregulated. Conclusion. Our study suggests that mechanical loading at 8% strain and 1 Hz provides exclusive tenogenic differentiation; and produced comparable protein and gene expression to primary tenocytes.

Local Tension on Talin in Focal Adhesions Correlates with F-Actin Alignment at the Nanometer Scale

Cellular force transmission and mechanotransduction are critical in embryogenesis, normal physiology, and many diseases. Talin plays a key role in these processes by linking integrins to force-generating actomyosin. Using the previously characterized FRET-based talin tension sensor, we observed variations of tension both between and within individual focal adhesions in the same cell. Assembling and sliding adhesions showed gradients with higher talin tension toward the cell center, whereas mature, stable adhesions had uniform talin tension. Total talin accumulation was maximal in high-tension regions; by contrast, vinculin intensity was flat or maximal at the adhesion center, and actin intensity was maximal toward the cell center. To investigate mechanism, we combined talin tension imaging with cellular cryotomography to visualize the correlated actin organization at nanometer resolution. Regions of high talin tension had highly aligned linear actin filaments, whereas regions of low tension had less-well-aligned F-actin. These results reveal an orchestrated spatiotemporal relationship between talin tension, actin/vinculin localization, local actin organization, and focal adhesion dynamics.

Breath figures in tissue engineering and drug delivery: State-of-the-art and future perspectives

The breath figure (BF) method is an easy, low-cost method to prepare films with a highly organized honeycomb-like porous surface. The particular surface topography and porous nature of these materials makes them valuable substrates for studying the complex effects of topography on cell fate, and to produce biomimetic materials with high performance in tissue engineering. Numerous researchers over the last two decades have studied the effects of the honeycomb topography on a variety of primary and immortalized cell lines, and drew important conclusions that can be translated to the construction of optimal biomaterials for cell culture. The literature also encouragingly shows the potential of honeycomb films to induce differentiation of stem cells down a specific lineage without the need for biochemical stimuli. Here, we review the main studies where BF honeycomb films are used as substrates for tissue engineering applications. Furthermore, we highlight the numerous advantages of the porous nature of the films, such as the enhanced, spatially controlled adsorption of proteins, the topographical cues influencing cellular behavior, and the enhanced permeability which is essential both in vitro and in vivo. Finally, this review highlights the elegant use of honeycomb films as drug-eluting biomaterials or as reservoirs for distinct drug delivery systems.

STATEMENT OF SIGNIFICANCE

Combining biocompatible surfaces and 3D nano/microscale topographies, such as pores or grooves, is an effective strategy for manufacturing tissue engineering scaffolds. The breath figure (BF) method is an easy technique to prepare cell culture substrates with an organized, honeycomb-like porous surface. These surface features make these scaffolds valuable for studying how the cells interact with the biomaterials. Their unique surface topography can also resemble the natural environment of the tissues in the human body. For that reason, numerous studies, using different cell types, have shown that honeycomb films can constitute high performance substrates for cell culture. Here, we review those studies, we highlight the advantages of honeycomb films in tissue engineering and we discuss their potential as unique drug-eluting systems.

Fate of tenogenic differentiation potential of human bone marrow stromal cells by uniaxial stretching affected by stretch-activated calcium channel agonist gadolinium

The role for mechanical stimulation in the control of cell fate has been previously proposed, suggesting that there may be a role of mechanical conditioning in directing mesenchymal stromal cells (MSCs) towards specific lineage for tissue engineering applications. Although previous studies have reported that calcium signalling is involved in regulating many cellular processes in many cell types, its role in managing cellular responses to tensile loading (mechanotransduction) of MSCs has not been fully elucidated. In order to establish this, we disrupted calcium signalling by blocking stretch-activated calcium channel (SACC) in human MSCs (hMSCs) in vitro. Passaged-2 hMSCs were exposed to cyclic tensile loading (1 Hz + 8% for 6, 24, 48, and 72 hours) in the presence of the SACC blocker, gadolinium. Analyses include image observations of immunochemistry and immunofluorescence staining from extracellular matrix (ECM) production, and measuring related tenogenic and apoptosis gene marker expression. Uniaxial tensile loading increased the expression of tenogenic markers and ECM production. However, exposure to strain in the presence of 20 μM gadolinium reduced the induction of almost all tenogenic markers and ECM staining, suggesting that SACC acts as a mechanosensor in strain-induced hMSC tenogenic differentiation process. Although cell death was observed in prolonged stretching, it did not appear to be apoptosis mediated. In conclusion, the knowledge gained in this study by elucidating the role of calcium in MSC mechanotransduction processes, and that in prolonged stretching results in non-apoptosis mediated cell death may be potential useful for regenerative medicine applications.

Low-Level Laser Effect on Proliferation, Migration, and Antiapoptosis of Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) have been proved to be an important element in cell-based therapy. Photobiomodulation used extremely low-level lasers (LLLs) to affect the behavior of cells. The effect mechanism of LLLs on MSCs from human remained to be discovered. In this study, cell viability was assessed using MTS assays and cell cycle was evaluated by fluorescence-activated cell sorting (FACS). The influence of LLLs on mitochondrial biogenesis (fission or fusion) and function (ATP, reactive oxygen species [ROS], nitric oxide [NO]) was evaluated by transmission electron microscope, FACS, quantitative real time polymerase chain reaction (q-PCR), and immunocytochemistry. Cell migration and cytoskeleton alteration (actin and tubulin) were evaluated using transwell assay, immunocytochemistry, enzyme-linked immunosorbent assay, and western blotting. Cell apoptosis was evaluated using FACS, immunocytochemistry, and western blotting. We investigated that certain influence of LLLs on MSCs in vitro 6 or 24 h after 1 h of LLL irradiation. The mechanism of the effects included proliferation rate increase mediated by increased S phase proportion; mitochondrial biogenesis and function alteration mediated by fusion (Mfn1, Mfn2, and Opa-1) and fission (Fis1, Drp-1, and MTP18)-related proteins, NRF1, TFAM, PGC-1a, and upregulated intracellular ROS and NO concentration; migration acceleration through the ERK1/2 and FAK pathway and upregulation of growth factors such as HGF and PDGF; and resistance to apoptosis with increased Bcl-2 and decreased Bax, or through tunneling nanotube formation between LLL-treated MSCs and 5-fluorouracil-induced apoptotic MSCs. These observations suggested that LLLs enhanced stem cell survival and therapeutic function, which could appear to be an innovative pretreatment in the application of MSCs.

Predicting cell viability within tissue scaffolds under equiaxial strain: multi-scale finite element model of collagen-cardiomyocytes constructs

Successful tissue engineering and regenerative therapy necessitate having extensive knowledge about mechanical milieu in engineered tissues and the resident cells. In this study, we have merged two powerful analysis tools, namely finite element analysis and stochastic analysis, to understand the mechanical strain within the tissue scaffold and residing cells and to predict the cell viability upon applying mechanical strains. A continuum-based multi-length scale finite element model (FEM) was created to simulate the physiologically relevant equiaxial strain exposure on cell-embedded tissue scaffold and to calculate strain transferred to the tissue scaffold (macro-scale) and residing cells (micro-scale) upon various equiaxial strains. The data from FEM were used to predict cell viability under various equiaxial strain magnitudes using stochastic damage criterion analysis. The model validation was conducted through mechanically straining the cardiomyocyte-encapsulated collagen constructs using a custom-built mechanical loading platform (EQUicycler). FEM quantified the strain gradients over the radial and longitudinal direction of the scaffolds and the cells residing in different areas of interest. With the use of the experimental viability data, stochastic damage criterion, and the average cellular strains obtained from multi-length scale models, cellular viability was predicted and successfully validated. This methodology can provide a great tool to characterize the mechanical stimulation of bioreactors used in tissue engineering applications in providing quantification of mechanical strain and predicting cellular viability variations due to applied mechanical strain.

Combinatorial Method/High Throughput Strategies for Hydrogel Optimization in Tissue Engineering Applications

Combinatorial method/high throughput strategies, which have long been used in the pharmaceutical industry, have recently been applied to hydrogel optimization for tissue engineering applications. Although many combinatorial methods have been developed, few are suitable for use in tissue engineering hydrogel optimization. Currently, only three approaches (design of experiment, arrays and continuous gradients) have been utilized. This review highlights recent work with each approach. The benefits and disadvantages of design of experiment, array and continuous gradient approaches depending on study objectives and the general advantages of using combinatorial methods for hydrogel optimization over traditional optimization strategies will be discussed. Fabrication considerations for combinatorial method/high throughput samples will additionally be addressed to provide an assessment of the current state of the field, and potential future contributions to expedited material optimization and design.

Talin tension sensor reveals novel features of focal adhesion force transmission and mechanosensitivity

Integrin-dependent adhesions are mechanosensitive structures in which talin mediates a linkage to actin filaments either directly or indirectly by recruiting vinculin. Here, we report the development and validation of a talin tension sensor. We find that talin in focal adhesions is under tension, which is higher in peripheral than central adhesions. Tension on talin is increased by vinculin and depends mainly on actin-binding site 2 (ABS2) within the middle of the rod domain, rather than ABS3 at the far C terminus. Unlike vinculin, talin is under lower tension on soft substrates. The difference between central and peripheral adhesions requires ABS3 but not vinculin or ABS2. However, differential stiffness sensing by talin requires ABS2 but not vinculin or ABS3. These results indicate that central versus peripheral adhesions must be organized and regulated differently, and that ABS2 and ABS3 have distinct functions in spatial variations and stiffness sensing. Overall, these results shed new light on talin function and constrain models for cellular mechanosensing.

Stimulation of Bone Repair with Ultrasound

This chapter reviews the different options available for the use of ultrasound in the enhancement of fracture healing or in the reactivation of a failed healing process: LIPUS, shock waves and ultrasound-mediated delivery of bioactive molecules, such as growth factors or plasmids. The main emphasis is on LIPUS, or Low Intensity Pulsed Ultrasound, the most widespread and studied technique. LIPUS has pronounced bioeffects on tissue regeneration, while employing intensities within a diagnostic range. The biological response to LIPUS is complex as the response of numerous cell types to this stimulus involves several pathways. Known to-date mechanotransduction pathways involved in cell responses include MAPK and other kinases signaling pathways, gap-junctional intercellular communication, up-regulation and clustering of integrins, involvement of the COX-2/PGE2 and iNOS/NO pathways, and activation of the ATI mechanoreceptor. Mechanisms at the origin of LIPUS biological effects remain intriguing, and analysis is hampered by the diversity of experimental systems used in-vitro. Data point to clear evidence that bioeffects can be modulated by direct and indirect mechanical effects, like acoustic radiation force, acoustic streaming, propagation of surface waves, heat, fluid-flow induced circulation and redistribution of nutrients, oxygen and signaling molecules. One of the future engineering challenge is therefore the design of dedicated experimental set-ups allowing control of these different mechanical phenomena, and to relate them to biological responses. Then, the derivation of an 'acoustic dose' and the cross-calibration of the different experimental systems will be possible. Despite this imperfect knowledge of LIPUS biophysics, the clinical evidence, although most often of low quality, speaks in favor of the clinical use of LIPUS, when the economics of nonunion and the absence of toxicity of this ultrasound technology are taken into account.

Silk fibroin scaffolds promote formation of the ex vivo niche for salivary gland epithelial cell growth, matrix formation, and retention of differentiated function

Salivary gland hypofunction often results from a number of causes, including the use of various medications, radiation for head and neck tumors, autoimmune diseases, diabetes, and aging. Since treatments for this condition are lacking and adult salivary glands have little regenerative capacity, there is a need for cell-based therapies to restore salivary gland function. Development of these treatment strategies requires the establishment of a system that is capable of replicating the salivary gland cell "niche" to support the proliferation and differentiation of salivary gland progenitor cells. In this study, a culture system using three-dimensional silk fibroin scaffolds (SFS) and primary salivary gland epithelial cells (pSGECs) from rat submandibular (SM) gland and parotid gland (PG) was established and characterized. pSGECs grown on SFS, but not tissue culture plastic (TCP), formed aggregates of cells with morphological features resembling secretory acini. High levels of amylase were released into the media by both cell types after extended periods in culture on SFS. Remarkably, cultures of PG-derived cells on SFS, but not SM cells, responded to isoproterenol, a β-adrenergic receptor agonist, with increased enzyme release. This behavior mimics that of the salivary glands in vivo. Decellularized extracellular matrix (ECM) formed by pSGECs in culture on SFS contained type IV collagen, a major component of the basement membrane. These results demonstrate that pSGECs grown on SFS, but not TCP, retain important functional and structural features of differentiated salivary glands and produce an ECM that mimics the native salivary gland cell niche. These results demonstrate that SFS has potential as a scaffold for creating the salivary gland cell niche in vitro and may provide an approach for inducing multipotent stem cells to provide therapeutically meaningful numbers of salivary gland progenitor cells for regenerating these tissues in patients.

Dynamics of cell shape inheritance in fission yeast

Every cell has a characteristic shape key to its fate and function. That shape is not only the product of genetic design and of the physical and biochemical environment, but it is also subject to inheritance. However, the nature and contribution of cell shape inheritance to morphogenetic control is mostly ignored. Here, we investigate morphogenetic inheritance in the cylindrically-shaped fission yeast Schizosaccharomyces pombe. Focusing on sixteen different ‘curved’ mutants - a class of mutants which often fail to grow axially straight – we quantitatively characterize their dynamics of cell shape inheritance throughout generations. We show that mutants of similar machineries display similar dynamics of cell shape inheritance, and exploit this feature to show that persistent axial cell growth in S. pombe is secured by multiple, separable molecular pathways. Finally, we find that one of those pathways corresponds to the swc2-swr1-vps71 SWR1/SRCAP chromatin remodelling complex, which acts additively to the known mal3-tip1-mto1-mto2 microtubule and tea1-tea2-tea4-pom1 polarity machineries.

High glucose-induced hyperosmolarity impacts proliferation, cytoskeleton remodeling and migration of human induced pluripotent stem cells via aquaporin-1

BACKGROUND AND OBJECTIVE

Hyperglycemia leads to adaptive cell responses in part due to hyperosmolarity. In endothelial and epithelial cells, hyperosmolarity induces aquaporin-1 (AQP1) which plays a role in cytoskeletal remodeling, cell proliferation and migration. Whether such impairments also occur in human induced pluripotent stem cells (iPS) is not known. We therefore investigated whether high glucose-induced hyperosmolarity impacts proliferation, migration, expression of pluripotency markers and actin skeleton remodeling in iPS cells in an AQP1-dependent manner.

METHODS AND RESULTS

Human iPS cells were generated from skin fibroblasts by lentiviral transduction of four reprogramming factors (Oct4, Sox2, Klf4, c-Myc). After reprogramming, iPS cells were characterized by their adaptive responses to high glucose-induced hyperosmolarity by incubation with 5.5mmol/L glucose, high glucose (HG) at 30.5mM, or with the hyperosmolar control mannitol (HM). Exposure to either HG or HM increased the expression of AQP1. AQP1 co-immunoprecipitated with β-catenin. HG and HM induced the expression of β-catenin. Under these conditions, iPS cells showed increased ratios of F-actin to G-actin and formed increased tubing networks. Inhibition of AQP1 with small interfering RNA (siRNA) reverted the inducing effects of HG and HM.

CONCLUSIONS

High glucose enhances human iPS cell proliferation and cytoskeletal remodeling due to hyperosmolarity-induced upregulation of AQP1.

The effects of actin cytoskeleton perturbation on keratin intermediate filament formation in mesenchymal stem/stromal cells

F-actin plays a crucial role in composing the three-dimensional cytoskeleton and F-actin depolymerization alters fate choice of mesenchymal stem/stromal cells (MSCs). Here, we investigated differential gene expression and subsequent physiological changes in response to F-actin perturbation by latrunculin B in MSCs. Nineteen genes were down-regulated and 27 genes were up-regulated in the first 15 min after F-actin depolymerization. Functional enrichment analysis revealed that five genes involved in keratin (KRT) intermediate filaments clustering in the chromosome 17q21.2 region, i.e., KRT14, KRT19, KRT34, KRT-associated protein (KRTAP) 1-5, and KRTAP2-3, were strongly up-regulated. Transcription factor prediction identified NKX2.5 as the potential transcription factor to control KRT19, KRT34, KRTAP1-5, and KRTAP2-3; and indeed, the protein level of NKX2.5 was markedly increased in the nuclear fraction within 15 min of F-actin depolymerization. The peak of keratin intermediate filament formation was 1 h after actin perturbation, and the morphological changes showed by decrease in the ratio of long-axis to short-axis diameter in MSCs was observed after 4 h. Together, F-actin depolymerization rapidly triggers keratin intermediate filament formation by turning on keratin-related genes on chromosome 17q21.2. Such findings offer new insight in lineage commitment of MSCs and further scaffold design in MSC-based tissue engineering.

Biomechanics and functionality of hepatocytes in liver cirrhosis

Cirrhosis is a life-threatening condition that is generally attributed to overproduction of collagen fibers in the extracellular matrix that mechanically stiffens the liver. Chronic liver injury due to causes including viral hepatitis, inherited and metabolic liver diseases and external factors such as alcohol abuse can result in the development of cirrhosis. Progression of cirrhosis leads to hepatocellular dysfunction. While extensive studies to understand the complexity underlying liver fibrosis have led to potential application of anti-fibrotic drugs, no such FDA-approved drugs are currently available. Additional studies of hepatic fibrogenesis and cirrhosis primarily have focused on the extracellular matrix, while hepatocyte biomechanics has received limited attention. The role of hepatocyte biomechanics in liver cirrhosis remains elusive, and how the cell stiffness is correlated with biological functions of hepatocytes is also unknown. In this study, we demonstrate that the biomechanical properties of hepatocytes are correlated with their functions (e.g., glucose metabolism), and that hepatic dysfunction can be restored through modulation of the cellular biomechanics. Furthermore, our results indicate the hepatocyte functionality appears to be regulated through a crosstalk between the Rho and Akt signaling. These novel findings may lead to biomechanical intervention of hepatocytes and the development of innovative tissue engineering for clinical treatment to target liver cells rather than exclusively focusing on the extracellular matrix alone in liver cirrhosis.

Engineered micromechanical cues affecting human pluripotent stem cell regulations and fate

The survival, growth, self-renewal, and differentiation of human pluripotent stem cells (hPSCs) are influenced by their microenvironment, or so-called "niche," consisting of particular chemical and physical cues. Previous studies on mesenchymal stem cells and other stem cells have collectively uncovered the importance of physical cues and have begun to shed light on how stem cells sense and process such cues. In an attempt to support similar progress in mechanobiology of hPSCs, we review mechanosensory machinery, which plays an important role in cell-extracellular matrix interactions, cell-cell interactions, and subsequent intracellular responses. In addition, we review recent studies on the mechanobiology of hPSCs, in which engineered micromechanical environments were used to investigate effects of specific physical cues. Identifying key physical cues and understanding their mechanism will ultimately help in harnessing the full potential of hPSCs for clinical applications.

The self-renewal of mouse embryonic stem cells is regulated by cell-substratum adhesion and cell spreading

Mouse embryonic stem cells (mESCs) undergo self-renewal in the presence of the cytokine, leukaemia inhibitory factor (LIF). Following LIF withdrawal, mESCs differentiate, and this is accompanied by an increase in cell-substratum adhesion and cell spreading. The purpose of this study was to investigate the relationship between cell spreading and mESC differentiation. Using E14 and R1 mESC lines, we have restricted cell spreading in the absence of LIF by either culturing mESCs on chemically defined, weakly adhesive biomaterial substrates, or by manipulating the cytoskeleton. We demonstrate that by restricting the degree of spreading by either method, mESCs can be maintained in an undifferentiated and pluripotent state. Under these conditions, self-renewal occurs without the need for LIF and is independent of nuclear translocation of tyrosine-phosphorylated STAT3 or β-catenin, which have previously been implicated in self-renewal. We also demonstrate that the effect of restricted cell spreading on mESC self-renewal is not mediated by increased intercellular adhesion, as evidenced by the observations that inhibition of mESC adhesion using a function blocking anti E-cadherin antibody or siRNA do not promote differentiation. These results show that mESC spreading and differentiation are regulated both by LIF and by cell-substratum adhesion, consistent with the hypothesis that cell spreading is the common intermediate step in the regulation of mESC differentiation by either LIF or cell-substratum adhesion.