Yeast surface display of dehydrogenases in microbial fuel-cells

Surface display system of Bacillus subtilis: A promising approach for improving the stability and applications of cellobiose dehydrogenase

Cellobiose dehydrogenase (CDH) plays a crucial role in lignocellulose degradation and bioelectrochemical industries, making it highly in demand. However, the production and purification of CDH through fungal heterologous expression methods is time-consuming, costly, and challenging. In this study, we successfully displayed Pycnoporus sanguineus CDH (psCDH) on the surface of Bacillus subtilis spores for the first time. Enzymatic characterization revealed that spore surface display enhanced the tolerance of psCDH to high temperature (80 °C) and low pH levels (3.5) compared to free psCDH. Furthermore, we found that glycerol, lactic acid, and malic acid promoted the activity of immobilized spore-displayed psCDH; glycerol has a more significant stimulating effect, increasing the activity from 16.86 ± 1.27 U/mL to 46.26 ± 3.25 U/mL. After four reuse cycles, the psCDH immobilized with spores retained 48% of its initial activity, demonstrating a substantial recovery rate. In conclusion, the spore display system, relying on cotG, enables the expression and immobilization of CDH while enhancing its resistance to adverse conditions. This system demonstrates efficient enzyme recovery and reuse. This approach provides a novel method and strategy for the immobilization and stability enhancement of CDH.

Harnessing fungal bio-electricity: a promising path to a cleaner environment

Integrating fungi into fuel cell systems presents a promising opportunity to address environmental pollution while simultaneously generating energy. This review explores the innovative concept of constructing wetlands as fuel cells for pollutant degradation, offering a practical and eco-friendly solution to pollution challenges. Fungi possess unique capabilities in producing power, fuel, and electricity through metabolic processes, drawing significant interest for applications in remediation and degradation. Limited data exist on fungi's ability to generate electricity during catalytic reactions involving various enzymes, especially while remediating pollutants. Certain species, such as Trametes versicolor, Ganoderma lucidum, Galactomyces reessii, Aspergillus spp., Kluyveromyce smarxianus, and Hansenula anomala, have been reported to generate electricity at 1200 mW/m3, 207 mW/m2, 1,163 mW/m3, 438 mW/m3, 850,000 mW/m3, and 2,900 mW/m3, respectively. Despite the eco-friendly potential compared to conventional methods, fungi's role remains largely unexplored. This review delves into fungi's exceptional potential as fuel cell catalysts, serving as anodic or cathodic agents to mitigate land, air, and water pollutants while simultaneously producing fuel and power. Applications cover a wide range of tasks, and the innovative concept of wetlands designed as fuel cells for pollutant degradation is discussed. Cost-effectiveness may vary depending on specific contexts and applications. Fungal fuel cells (FFCs) offer a versatile and innovative solution to global challenges, addressing the increasing demand for alternative bioenergy production amid population growth and expanding industrial activities. The mechanistic approach of fungal enzymes via microbial combinations and electrochemical fungal systems facilitates the oxidation of organic substrates, oxygen reduction, and ion exchange membrane orchestration of essential reactions. Fungal laccase plays a crucial role in pollutant removal and monitoring environmental contaminants. Fungal consortiums show remarkable potential in fine-tuning FFC performance, impacting both power generation and pollutant degradation. Beyond energy generation, fungal cells effectively remove pollutants. Overall, FFCs present a promising avenue to address energy needs and mitigate pollutants simultaneously.

Enhanced bioelectricity generation in thermophilic microbial fuel cell with lignocellulose as an electron donor by resazurin-mediated electron transfer

Microbial fuel cell (MFC) with lignocellulose as an electron donor is considered a sustainable biorefinery. However, low lignocellulose degradation and energy output restrict the scale of application. Herein, the extracellular electron transfer (EET) capacity of Acetivibrio thermocellus DSM 1313 with lignocellulose as substrate was shown to be mediated by the self-produced flavin, and its intracellular electron transfer went through the whole respiratory chain. Thermophilic MFC with resazurin exhibited an increase in the open circuit voltage by 37.78%, and a 2.60 folds increase in power density of 77.85 mW/m2, respectively. Differential pulse voltammetry and electrochemical impedance spectroscopy analysis indicated that resazurin decreased the solution and anode charge transfer resistance, and enhanced the extracellular electrochemical activity. Furthermore, resazurin resulted in a lower redox potential, allowing preferential electron transfer to resazurin rather than flavin. This research establishes a resazurin-mediated thermophilic MFC with lignocellulose as substrate, which provides novel idea on the biomass refinery.

Acceptor properties of "carbon nanotubes-redox-active polymer based on bovine serum albumin modified with ferrocenecarboxaldehyde" composite for creating a BOD biosensor with Blastobotrys adeninivorans BKM Y-2677 yeast

The possibility of using a composite material based on bovine serum albumin (BSA) covalently bonded with ferrocenecarboxaldehyde and containing carbon nanotubes (CNT) for the immobilization of Blastobotrys adeninivorans BKM Y-2677 (B. adeninivorans) yeast is discussed. The optimal ratio of ferrocenecarboxaldehyde to BSA for the redox-active polymer synthesis is 1:2, since the heterogeneous electron transfer constant is 0.45 ± 0.01 s-1. When carbon nanotubes (CNTs) are added to this polymer, the heterogeneous electron transfer constant increases: at a CNT specific density of 2.5 µg/mm2, it reaches a maximum value of 0.55 ± 0.01 s-1. The addition of CNTs into the conducting system leads to increasing of the rate constant of interaction redox species with B. adeninivorans yeast by an order: the rate constant of interaction between B. adeninivorans yeast and electroactive particles in a redox-active polymer is 0.056 ± 0.005 dm3/g × s and in a composite material based on CNTs is 0.51 ± 0.02 dm3/g × s. The yeast specific density at the electrode of 0.1 mg/mm2 and electrolyte pH of 6.2 was chosen as the working value for the receptor system operation. Immobilized in a composite material, yeast oxidizes a wider range of substrates compared with a similar receptor element based on the ferrocene mediator. The biosensors formed on the basis of hybrid polymers have a high sensitivity with a lower limit of determined concentrations of 1.5 mg/dm3 with an assay time of 5 min and a high correlation (R = 0.9945) with the results of the standard method for determining biochemical oxygen demand (BOD) in nine real surface water samples of the Tula region.

The Role of Fungal Fuel Cells in Energy Production and the Removal of Pollutants from Wastewater

Pure water, i.e., a sign of life, continuously circulates and is contaminated by different discharges. This emerging environmental problem has been attracting the attention of scientists searching for methods for the treatment of wastewater contaminated by multiple recalcitrant compounds. Various physical and chemical methods are used to degrade contaminants from water bodies. Traditional methods have certain limitations and complexities for bioenergy production, which motivates the search for new ways of sustainable bioenergy production and wastewater treatment. Biological strategies have opened new avenues to the treatment of wastewater using oxidoreductase enzymes for the degradation of pollutants. Fungal-based fuel cells (FFCs), with their catalysts, have gained considerable attention among scientists worldwide. They are a new, ecofriendly, and alternative approach to nonchemical methods due to easy handling. FFCs are efficiently used in wastewater treatment and the production of electricity for power generation. This article also highlights the construction of fungal catalytic cells and the enzymatic performance of different fungal species in energy production and the treatment of wastewater.

Microbial Biofuel Cells: Fundamental Principles, Development and Recent Obstacles

This review focuses on the development of microbial biofuel cells to demonstrate how similar principles apply to the development of bioelectronic devices. The low specificity of microorganism-based amperometric biosensors can be exploited in designing microbial biofuel cells, enabling them to consume a broader range of chemical fuels. Charge transfer efficiency is among the most challenging and critical issues while developing biofuel cells. Nanomaterials and particular redox mediators are exploited to facilitate charge transfer between biomaterials and biofuel cell electrodes. The application of conductive polymers (CPs) can improve the efficiency of biofuel cells while CPs are well-suitable for the immobilization of enzymes, and in some specific circumstances, CPs can facilitate charge transfer. Moreover, biocompatibility is an important issue during the development of implantable biofuel cells. Therefore, biocompatibility-related aspects of conducting polymers with microorganisms are discussed in this review. Ways to modify cell-wall/membrane and to improve charge transfer efficiency and suitability for biofuel cell design are outlined.

Microbiomics for enhancing electron transfer in an electrochemical system

In microbial electrochemical systems, microorganisms catalyze chemical reactions converting chemical energy present in organic and inorganic molecules into electrical energy. The concept of microbial electrochemistry has been gaining tremendous attention for the past two decades, mainly due to its numerous applications. This technology offers a wide range of applications in areas such as the environment, industries, and sensors. The biocatalysts governing the reactions could be cell secretion, cell component, or a whole cell. The electroactive bacteria can interact with insoluble materials such as electrodes for exchanging electrons through colonization and biofilm formation. Though biofilm formation is one of the major modes for extracellular electron transfer with the electrode, there are other few mechanisms through which the process can occur. Apart from biofilm formation electron exchange can take place through flavins, cytochromes, cell surface appendages, and other metabolites. The present article targets the various mechanisms of electron exchange for microbiome-induced electron transfer activity, proteins, and secretory molecules involved in the electron transfer. This review also focuses on various proteomics and genetics strategies implemented and developed to enhance the exo-electron transfer process in electroactive bacteria. Recent progress and reports on synthetic biology and genetic engineering in exploring the direct and indirect electron transfer phenomenon have also been emphasized.

Cellobiose dehydrogenase in biofuel cells

Enzymatic biofuel cells utilize oxidoreductases as highly specific and highly active electrocatalysts to convert a fuel and an oxidant even in complex biological matrices like hydrolysates or physiological fluids into electric energy. The hemoflavoenzyme cellobiose dehydrogenase is investigated as a versatile bioelectrocatalyst for the anode reaction of biofuel cells, because it is robust, converts a range of different carbohydrates, and can transfer electrons to the anode by direct electron transfer or via redox mediators. The versatility of cellobiose dehydrogenase has led to the development of various electrode modifications to create biofuel cells and biosupercapacitors that are capable to power small electronic devices like biosensors and connect them wireless to a receiver.

Fungal-mediated electrochemical system: Prospects, applications and challenges

Microbial fuel cells (MFCs) that generate bioelectricity from biodegradable waste have received considerable attention from biologists. Fungi play a significant role as both anodic and cathodic catalysts in MFCs. Saccharomyces cerevisiae is a fungus with an ability to transfer electrons through mediators such as methylene blue (MB), neutral red (NR) or even without a mediator. This unique role of fungal cells in exocellular electron transfer (EET) and their interactions with electrodes hold a lot of promise in areas such as wastewater treatment where yeast cell-based MFCs can be used. The present article highlights the physico-chemical factors affecting the performance of fungal-mediated MFCs in terms of power output and degradation of organic pollutants, along with the challenges associated with fungal MFCs. In addition, to this comparative assessment of fungal-mediated bio-electrochemical systems, their development, possible applications and potential challenges are also discussed.

Recent trends in upgrading the performance of yeast as electrode biocatalyst in microbial fuel cells

Microbial fuel cell (MFC) is an optimistic fuel cell technology that applies microorganism's biochemical catalytic activities in consuming organic substrate and produce electricity. In the past, several researchers have reported power generation from Saccharomyces cerevisiae, but nowadays, most of the studies are centred around bacterial biofilms (prokaryotes) as anode biocatalyst. Yeast (a eukaryote) has also been applied as a biocatalyst in MFCs as they are non-pathogenic, easy to handle and tolerant to various environmental conditions. Yeast strains such as Arxula adeninvorans, Candida melibiosica, Hansenula polymorpha, Hansenula anomala, Kluyveromyces marxianus and Saccharomyces cerevisiae have been utilized in MFCs. This review summarizes the application of yeast as an anode biocatalyst together with a discussion on the mechanism of electron transfer from yeast cells to the anode and highlights the techniques applied in improving the efficiency of yeast-based MFCs. The recent challenges and benefits of utilizing yeast in MFCs have been also encapsulated in this review.

A kinetic approach to the formation of two-mediator systems for developing microbial biosensors as exemplified by a rapid biochemical oxygen demand assay

This work proposes a method of forming a microorganism-mediator(s) receptor system, in which the rates of separate stages of mediator bioelectrocatalysis are used as the basis for the development of biosensors for the biochemical oxygen demand (BOD) rapid assay. In the presence of a ferrocene mediator, the yeast Blastobotrys adeninivorans was shown to enable oxidation of a larger range of substrates as compared with other investigated microorganisms-bacteria Escherichia coli and yeast Ogataea polymorpha. The rate constants of the interaction of the yeast B. adeninivorans with nine compounds, electron transfer mediators, were determined; the best mediator for these microorganisms was found to be neutral red (k _int = 0.681 ± 0.009 dm³/g s). Neutral red possesses a high rate of interaction with the ferrocene mediator (14,200 ± 100 dm³/mol s) shown earlier to be the most promising acceptor of electrons at a carbon paste electrode (0.4 ± 0.1 cm/s). These features enabled the formation of a two-mediator ferrocene-neutral red system to be used in a biosensor. A two-mediator-based biosensor had a higher sensitivity (the lower limit of detected BOD concentrations, 0.16 mg/dm³) than that of a one-mediator system based on neutral red and ferrocene. Analysis of ten samples from surface water reservoirs showed the combination of ferrocene, neutral red and the yeast B. adeninivorans to enable the data that highly correlated (R = 0.9693) with those of the standard method.

From Microorganism-Based Amperometric Biosensors towards Microbial Fuel Cells

This review focuses on the overview of microbial amperometric biosensors and microbial biofuel cells (MFC) and shows how very similar principles are applied for the design of both types of these bioelectronics-based devices. Most microorganism-based amperometric biosensors show poor specificity, but this drawback can be exploited in the design of microbial biofuel cells because this enables them to consume wider range of chemical fuels. The efficiency of the charge transfer is among the most challenging and critical issues during the development of any kind of biofuel cell. In most cases, particular redox mediators and nanomaterials are applied for the facilitation of charge transfer from applied biomaterials towards biofuel cell electrodes. Some improvements in charge transfer efficiency can be achieved by the application of conducting polymers (CPs), which can be used for the immobilization of enzymes and in some particular cases even for the facilitation of charge transfer. In this review, charge transfer pathways and mechanisms, which are suitable for the design of biosensors and in biofuel cells, are discussed. Modification methods of the cell-wall/membrane by conducting polymers in order to enhance charge transfer efficiency of microorganisms, which can be potentially applied in the design of microbial biofuel cells, are outlined. The biocompatibility-related aspects of conducting polymers with microorganisms are summarized.

Decorating the surface of Escherichia coli with bacterial lipoproteins: a comparative analysis of different display systems

Background

The display of recombinant proteins on cell surfaces has a plethora of applications including vaccine development, screening of peptide libraries, whole-cell biocatalysts and biosensor development for diagnostic, industrial or environmental purposes. In the last decades, a wide variety of surface display systems have been developed for the exposure of recombinant proteins on the surface of Escherichia coli, such as autotransporters and outer membrane proteins.

Results

In this study, we assess three approaches for the surface display of a panel of heterologous and homologous mature lipoproteins in E. coli: four from Neisseria meningitidis and four from the host strain that are known to be localised in the inner leaflet of the outer membrane. Constructs were made carrying the sequences coding for eight mature lipoproteins, each fused to the delivery portion of three different systems: the autotransporter adhesin involved in diffuse adherence-I (AIDA-I) from enteropathogenic E. coli, the Lpp’OmpA chimaera and a truncated form of the ice nucleation protein (INP), InaK-NC (N-terminal domain fused with C-terminal one) from Pseudomonas syringae. In contrast to what was observed for the INP constructs, when fused to the AIDA-I or Lpp’OmpA, most of the mature lipoproteins were displayed on the bacterial surface both at 37 and 25 °C as demonstrated by FACS analysis, confocal and transmission electron microscopy.

Conclusions

To our knowledge this is the first study that compares surface display systems using a number of passenger proteins. We have shown that the experimental conditions, including the choice of the carrier protein and the growth temperature, play an important role in the translocation of mature lipoproteins onto the bacterial surface. Despite all the optimization steps performed with the InaK-NC anchor motif, surface exposure of the passenger proteins used in this study was not achieved. For our experimental conditions, Lpp’OmpA chimaera has proved to be an efficient surface display system for the homologous passenger proteins although cell lysis and phenotype heterogeneity were observed. Finally, AIDA-I was found to be the best surface display system for mature lipoproteins (especially heterologous ones) in the E. coli host strain with no inhibition of growth and only limited phenotype heterogeneity.

Cell-surface engineering of yeasts for whole-cell biocatalysts

Due to the unique advantages comparing with traditional free enzymes and chemical catalysis, whole-cell biocatalysts have been widely used to catalyze reactions effectively, simply and environment friendly. Cell-surface display technology provides a novel and effective approach for improved whole-cell biocatalysts expressing heterologous enzymes on the cell surface. They can overcome the substrate transport limitation of the intracellular expression and provide the enzymes with enhanced properties. Among all the host surface-displaying microorganisms, yeast is ideally suitable for constructing whole cell-surface-displaying biocatalyst, because of the large cell size, the generally regarded as safe (GRAS) status, and the perfect post-translational processing of secreted proteins. Yeast cell-surface display system has been a promising and powerful method for development of novel and improved engineered biocatalysts. In this review, the characterization and principles of yeast cell-surface display and the applications of yeast cell-surface display in engineered whole-cell biocatalysts as well as the improvement of the enzyme efficiency are summarized and discussed.

Optimization of production conditions of rice α-galactosidase II displayed on yeast cell surface

The yeast surface displayed rice α-galactosidase II (YSD rice α-Gal II) was generated with the pYD1 vector. The expression and cultural conditions for the improvement of production of YSD rice α-Gal II were optimized. The results showed that several induction factors, which were the initial cell density, inoculation ratio, galactose (inducer) concentration, induction time and temperature, determined the activity and expression efficiency of YSD rice α-Gal II. Meanwhile, the medium composition also affected its activity and production. Moreover, the production of YSD rice α-Gal II was further improved by continuous feeding of galactose in the fermenter level. The highest production was obtained at an initial cell density of OD₆₀₀ = 2.9, 2% inoculation ratio, and 2% galactose, with 0.6 g/L compound nitrogen source ((NH₄)₂SO₄/urea = 2/1, w/w) and 5 g/L sucrose, followed by continuous feeding of galactose (20 g/L with flow rate of 1.5 mL/h). At such conditions, the enzyme activity and productivity reached to 676.2 U/g (DCW) and 1548.5 U/L, respectively, 26.4- and 63.7-fold to that before optimization. The results provided a basic and effective strategy for the industrial production of YSD rice α-Gal II.

Encapsulation of Microorganisms, Enzymes, and Redox Mediators in Graphene Oxide and Reduced Graphene Oxide

Graphene oxide (GO) and reduced graphene oxide (rGO) were demonstrated in the past decade as biocompatible carbon-based materials that could be efficiently used in bioelectrochemical systems (BESs). Specifically, for redox enzyme encapsulation in order to improve electron communication between enzymes and electrodes. The addition of GO to different solvents was shown to cause gelation while still allowing small molecule diffusion through its gel-like matrix. Taking the combination of these traits together, we decided to use GO hydrogels for the encapsulation of enzymes displayed on the surface of yeast in anodes of microbial fuel cells. During our studies we have followed the changes in the physical characteristics of GO upon encapsulation of yeast cells displaying glucose oxidase in the presence of glucose and noted that GO is being rapidly reduced to rGO as a function of glucose concentrations. GO reduction under these conditions served as a proof of electron communication between the surface-displayed enzymes and GO. Hence, we set out to study this phenomenon by the encapsulation of a purified glucose dehydrogenase (in the absence of microbial cells) in rGO where improved electron transfer to the electrode could be observed in the presence of phenothiazone. In this chapter, we describe how these systems were technically constructed and characterized and how a very affordable matrix such as GO could be used to electrically wire enzymes as a good replacement for expensive mediator containing redox active polymers commonly used in BESs.

Fungi-Based Microbial Fuel Cells

Fungi are among the microorganisms able to generate electricity as a result of their metabolic processes. Throughout the last several years, a large number of papers on various microorganisms for current production in microbial fuel cells (MFCs) have been published; however, fungi still lack sufficient evaluation in this regard. In this review, we focus on fungi, paying special attention to their potential applicability to MFCs. Fungi used as anodic or cathodic catalysts, in different reactor configurations, with or without the addition of an exogenous mediator, are described. Contrary to bacteria, in which the mechanism of electron transfer is pretty well known, the mechanism of electron transfer in fungi-based MFCs has not been studied intensively. Thus, here we describe the main findings, which can be used as the starting point for future investigations. We show that fungi have the potential to act as electrogens or cathode catalysts, but MFCs based on bacteria–fungus interactions are especially interesting. The review presents the current state-of-the-art in the field of MFC systems exploiting fungi.

Electron transfer rate analysis of a site-specifically wired copper oxidase

Electron transfer kinetic parameters of site-specifically wired copper oxidase were investigated.

Highly Efficient Flavin-Adenine Dinucleotide Glucose Dehydrogenase Fused to a Minimal Cytochrome C Domain

Flavin-adenine dinucleotide (FAD) dependent glucose dehydrogenase (GDH) is a thermostable, oxygen insensitive redox enzyme used in bioelectrochemical applications. The FAD cofactor of the enzyme is buried within the proteinaceous matrix of the enzyme, which makes it almost unreachable for a direct communication with an electrode. In this study, FAD dependent glucose dehydrogenase was fused to a natural minimal cytochrome domain in its c-terminus to achieve direct electron transfer. We introduce a fusion enzyme that can communicate with an electrode directly, without the use of a mediator molecule. The new fusion enzyme, with its direct electron transfer abilities displays superior activity to that of the native enzyme, with a k_cat that is ca. 3 times higher than that of the native enzyme, a k_cat/K_M that is more than 3 times higher than that of GDH and 5 to 7 times higher catalytic currents with an onset potential of ca. (-) 0.15 V vs Ag/AgCl, affording higher glucose sensing selectivity. Taking these parameters into consideration, the fusion enzyme presented can serve as a good candidate for blood glucose monitoring and for other glucose based bioelectrochemical systems.

The Electrosome: A Surface-Displayed Enzymatic Cascade in a Biofuel Cell's Anode and a High-Density Surface-Displayed Biocathodic Enzyme

The limitation of surface-display systems in biofuel cells to a single redox enzyme is a major drawback of hybrid biofuel cells, resulting in a low copy-number of enzymes per yeast cell and a limitation in displaying enzymatic cascades. Here we present the electrosome, a novel surface-display system based on the specific interaction between the cellulosomal scaffoldin protein and a cascade of redox enzymes that allows multiple electron-release by fuel oxidation. The electrosome is composed of two compartments: (i) a hybrid anode, which consists of dockerin-containing enzymes attached specifically to cohesin sites in the scaffoldin to assemble an ethanol oxidation cascade, and (ii) a hybrid cathode, which consists of a dockerin-containing oxygen-reducing enzyme attached in multiple copies to the cohesin-bearing scaffoldin. Each of the two compartments was designed, displayed, and tested separately. The new hybrid cell compartments displayed enhanced performance over traditional biofuel cells; in the anode, the cascade of ethanol oxidation demonstrated higher performance than a cell with just a single enzyme. In the cathode, a higher copy number per yeast cell of the oxygen-reducing enzyme copper oxidase has reduced the effect of competitive inhibition resulting from yeast oxygen consumption. This work paves the way for the assembly of more complex cascades using different enzymes and larger scaffoldins to further improve the performance of hybrid cells.