Electrochemical monitoring of Acidithiobacillus thiooxidans biofilm formation on graphite surface with elemental sulfur

Molecular Identification and Acid Stress Response of an Acidithiobacillus thiooxidans Strain Isolated from Rio Tinto (Spain)

Acidithiobacillus thiooxidans is of paramount importance in the development of biomining technologies. Being widely recognized as an extreme acidophile, extensive research has been dedicated to understanding its significant role in the extraction of several ores in recent years. However, there still exist significant molecular uncertainties surrounding this species. This study focuses on developing a taxonomic assignment method based on the sequencing of the 16S-5S rRNA cluster, along with a qPCR-based technology enabling precise growth determination. Additionally, an approach to understanding its response to acid stress is explored through RT-PCR and MALDI-TOF analysis. Our findings indicate that when subjected to pH levels below 1, the cell inhibits central (carbon fixation and metabolism) and energy (sulfur metabolism) metabolism, as well as chaperone synthesis, suggesting a potential cellular collapse. Nevertheless, the secretion of ammonia is enhanced to raise the environmental pH, while fatty acid synthesis is upregulated to reinforce the cell membrane.

The combined effect of graphene oxide and elemental nano-sulfur on soil biological properties and lettuce plant biomass

The impact of graphene oxide (GO) nanocarbon on soil properties is mixed, with both negative and positive effects. Although it decreases the viability of some microbes, there are few studies on how its single amendment to soil or in combination with nanosized sulfur benefits soil microorganisms and nutrient transformation. Therefore, an eight-week pot experiment was carried out under controlled conditions (growth chamber with artificial light) in soil seeded with lettuce (Lactuca sativa) and amended with GO or nano-sulfur on their own or their several combinations. The following variants were tested: (I) Control, (II) GO, (III) Low nano-S + GO, (IV) High nano-S + GO, (V) Low nano-S, (VI) High nano-S. Results revealed no significant differences in soil pH, dry plant aboveground, and root biomass among all five amended variants and the control group. The greatest positive effect on soil respiration was observed when GO was used alone, and this effect remained significant even when it was combined with high nano-S. Low nano-S plus a GO dose negatively affected some of the soil respiration types: NAG_SIR, Tre_SIR, Ala_SIR, and Arg_SIR. Single GO application was found to enhance arylsulfatase activity, while the combination of high nano-S and GO not only enhanced arylsulfatase but also urease and phosphatase activity in the soil. The elemental nano-S probably counteracted the GO-mediated effect on organic carbon oxidation. We partially proved the hypothesis that GO-enhanced nano-S oxidation increases phosphatase activity.

Effect of electric current intensity on performance of polycaprolactone/FeS2-based mixotrophic biofilm-electrode reactor

In this study, a bioelectrochemical system consisting of pyrite-based autotrophic denitrification (PAD) and heterotrophic denitrification (HD) was established to polish nitrate wastewater. The loading of electric current (EC) could stimulate the dissolution of pyrite. Appropriate EC (I ≤ 30 mA) was conducive to nitrate removal, too high EC (I = 40 mA) would inhibit nitrate removal and lead to an obvious accumulation of NO₂^--N and NH₄⁺-N. Microbial analysis revealed that the increase of EC could inhibit the diversity of heterotrophic microbes, but appropriate EC (I = 10 mA) could increase the diversity of autotrophic microbes. The EC loading was conducive to the enrichment of iron autotrophic denitrifiers (Ferritrophicum), pyrite-oxidizing bacteria (Thiobacillus, Sulfurimonas), and sulfur autotrophic denitrifiers (Dechloromonas, Thiobacillus, and Arenimonas). The EC loading enlarged the contribution of PAD, making PAD a dominant pathway in denitrification.

A Novel Method to Reveal a Ureolytic Biofilm Attachment and In Situ Growth Monitoring by Electrochemical Impedance Spectroscopy

The formation of biofilms capable of efficiently carrying out ureolysis is of fundamental importance in several biotechnological systems such as urinary tract infections, building materials and municipal wastewater treatment. This work proposes a straightforward method for the formation of a ureolytic biofilm attached to graphite. The proposed strategy reduced the time needed to complete ureolysis to 3 days instead of 16 days required in suspension culture. To confirm the formation of a ureolytic biofilm, scanning electron microscopy and confocal laser scanning microscopy studies were employed ex situ. However, it is imperative to analyse the biofilm by direct non-invasive techniques. Accordingly, open circuit potential (OCP) and electrochemical impedance spectroscopy (EIS) were used as in situ monitoring techniques. The reduction in OCP from - 0.01 to - 0.2 V vs. Ag/AgCl and the increase in capacitance from 200 to 260 μF cm^-2 were related to biofilm attachment. To the best of our knowledge, this is the first time in which a ureolytic biofilm attachment has been analysed by EIS. The increase in the biomass from 0.04 to 2.81 μm³ μm^-2 and in average thickness from 10.19 to 32.78 μm was related to biofilm maturation.

Importance of Initial Interfacial Steps during Chalcopyrite Bioleaching by a Thermoacidophilic Archaeon

Studies of thermophilic microorganisms have shown that they have a considerable biotechnological potential due to their optimum growth and metabolism at high temperatures. Thermophilic archaea have unique characteristics with important biotechnological applications; many of these species could be used in bioleaching processes to recover valuable metals from mineral ores. Particularly, bioleaching at high temperatures using thermoacidophilic microorganisms can greatly improve metal solubilization from refractory mineral species such as chalcopyrite (CuFeS₂), one of the most abundant and widespread copper-bearing minerals. Interfacial processes such as early cell adhesion, biofilm development, and the formation of passive layers on the mineral surface play important roles in the initial steps of bioleaching processes. The present work focused on the investigation of different bioleaching conditions using the thermoacidophilic archaeon Acidianus copahuensis DSM 29038 to elucidate which steps are pivotal during the chalcopyrite bioleaching. Fluorescent in situ hybridization (FISH) and confocal laser scanning microscopy (CLSM) were used to visualize the microorganism–mineral interaction. Results showed that up to 85% of copper recovery from chalcopyrite could be achieved using A. copahuensis. Improvements in these yields are intimately related to an early contact between cells and the mineral surface. On the other hand, surface coverage by inactivated cells as well as precipitates significantly reduced copper recoveries.

A journey in the complex interactions between electrochemistry and bacteriology: From electroactivity to electromodulation of bacterial biofilms

Although the term bioelectrochemistry tends to be associated with animal and human tissues, bioelectric currents exist also in plants and bacteria. Especially the latter, when agglomerated in the form of biofilms, can exhibit electroactivity and susceptibility to electrical stimulation. Therefore, electrochemical methods appear to become powerful techniques to expand the conventional strategies of biofilm characterization and modification. In this review, we aim to provide the insight into the electrochemical behaviour of bacteria and present the variety of electrochemical techniques that can be used either for the non-destructive monitoring of bacterial communities or modulation of their growth. The most common applications of electrical stimulation on biofilms are presented, including the prevention of bacterial growth by charging the surface of the materials, changing the direction of bacterial movement under the influence of the electric field and increasing of the potency of antibiotics when bactericides are coupled with the electric field. Also, the industrial applications of microbial electro-technologies are described, such as bioremediation, wastewater treatment, and microbial fuel cells. Consequently, we are showing the complexity of interactions that exist between electrochemistry and bacteriology that can be used for the benefit of these two disciplines.