Fabrication of high quality microarrays

Viruses in Wastewater-A Concern for Public Health and the Environment

Wastewater monitoring provides essential information about water quality and the degree of contamination. Monitoring these waters helps identify and manage risks to public health, prevent the spread of disease, and protect the environment. Standardizing the appropriate and most accurate methods for the isolation and identification of viruses in wastewater is necessary. This review aims to present the major classes of viruses in wastewater, as well as the methods of concentration, isolation, and identification of viruses in wastewater to assess public health risks and implement corrective measures to prevent and control viral infections. Last but not least, we propose to evaluate the current strategies in wastewater treatment as well as new alternative methods of water disinfection.

Measuring Encapsulation Efficiency in Cell-Mimicking Giant Unilamellar Vesicles

One of the main drivers within the field of bottom-up synthetic biology is to develop artificial chemical machines, perhaps even living systems, that have programmable functionality. Numerous toolkits exist to generate giant unilamellar vesicle-based artificial cells. However, methods able to quantitatively measure their molecular constituents upon formation is an underdeveloped area. We report an artificial cell quality control (AC/QC) protocol using a microfluidic-based single-molecule approach, enabling the absolute quantification of encapsulated biomolecules. While the measured average encapsulation efficiency was 11.4 ± 6.8%, the AC/QC method allowed us to determine encapsulation efficiencies per vesicle, which varied significantly from 2.4 to 41%. We show that it is possible to achieve a desired concentration of biomolecule within each vesicle by commensurate compensation of its concentration in the seed emulsion. However, the variability in encapsulation efficiency suggests caution is necessary when using such vesicles as simplified biological models or standards.

Recent Progress in Development and Application of DNA, Protein, Peptide, Glycan, Antibody, and Aptamer Microarrays

Microarrays are one of the trailblazing technologies of the last two decades and have displayed their importance in all the associated fields of biology. They are widely explored to screen, identify, and gain insights on the characteristics traits of biomolecules (individually or in complex solutions). A wide variety of biomolecule-based microarrays (DNA microarrays, protein microarrays, glycan microarrays, antibody microarrays, peptide microarrays, and aptamer microarrays) are either commercially available or fabricated in-house by researchers to explore diverse substrates, surface coating, immobilization techniques, and detection strategies. The aim of this review is to explore the development of biomolecule-based microarray applications since 2018 onwards. Here, we have covered a different array of printing strategies, substrate surface modification, biomolecule immobilization strategies, detection techniques, and biomolecule-based microarray applications. The period of 2018-2022 focused on using biomolecule-based microarrays for the identification of biomarkers, detection of viruses, differentiation of multiple pathogens, etc. A few potential future applications of microarrays could be for personalized medicine, vaccine candidate screening, toxin screening, pathogen identification, and posttranslational modifications.

Photoinduced adsorption of oligonucleotides on polyvinyl chloride films containing malachite green derivative

DNA adsorption on the micrometer scale in a simple and cost-effective manner has received considerable interest. We prepared a film by casting an organic solvent containing polyvinyl chloride and a malachite green derivative, which can be photoionized to afford a cationic moiety for interaction with DNA. In this article, we report photoinduced oligonucleotide adsorption on a film that offers spatial and temporal control over oligonucleotide adsorption. Fluorescence microscopy was used to observe the oligonucleotide adsorption. Oligonucleotides of various sequences and lengths were also examined. UV irradiation using a photomask having 100 μm-diameter holes promoted the oligonucleotide adsorption on the film, whereas there was hardly any oligonucleotide adsorbed on the non-irradiated area. We found that the nucleobase contributed to the adsorption and part of the anchor in the oligonucleotide chain was responsible for the adsorption on the film.

Structure and Oligonucleotide Binding Efficiency of Differently Prepared Click Chemistry-Type DNA Microarray Slides Based on 3-Azidopropyltrimethoxysilane

The structural characterization of glass slides surface-modified with 3-azidopropyltrimethoxysilane and used for anchoring nucleic acids, resulting in the so-called DNA microarrays, is presented. Depending on the silanization conditions, the slides were found to show different oligonucleotide binding efficiency, thus, an attempt was made to correlate this efficiency with the structural characteristics of the silane layers. Atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and X-ray reflectometry (XRR) measurements provided information on the surface topography, chemical composition and thickness of the silane films, respectively. The surface for which the best oligonucleotides binding efficiency is observed, has been found to consist of a densely-packed silane layer, decorated with a high-number of additional clusters that are believed to host exposed azide groups.

The Role of Surface Chemistry in the Efficacy of Protein and DNA Microarrays for Label-Free Detection: An Overview

The importance of microarrays in diagnostics and medicine has drastically increased in the last few years. Nevertheless, the efficiency of a microarray-based assay intrinsically depends on the density and functionality of the biorecognition elements immobilized onto each sensor spot. Recently, researchers have put effort into developing new functionalization strategies and technologies which provide efficient immobilization and stability of any sort of molecule. Here, we present an overview of the most widely used methods of surface functionalization of microarray substrates, as well as the most recent advances in the field, and compare their performance in terms of optimal immobilization of the bioreceptor molecules. We focus on label-free microarrays and, in particular, we aim to describe the impact of surface chemistry on two types of microarray-based sensors: microarrays for single particle imaging and for label-free measurements of binding kinetics. Both protein and DNA microarrays are taken into consideration, and the effect of different polymeric coatings on the molecules' functionalities is critically analyzed.

Ultra-fast and recyclable DNA biosensor for point-of-care detection of SARS-CoV-2 (COVID-19)

Rapid diagnosis and case isolation are pivotal to controlling the current pandemic of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this study, a label-free DNA capacitive biosensor for the detection of SARS-CoV-2 that demonstrates real-time, low-cost, and high-throughput screening of nucleic acid samples is presented. Our novel biosensor composed of the interdigitated platinum/titanium electrodes on the glass substrate can detect the hybridization of analyte DNA with probe DNA. The hybridization signals of specific DNA sequences were verified through exhaustive physicochemical analytical techniques such as Fourier transform infrared (FT-IR) spectrometry, contact-angle analysis, and capacitance-frequency measurements. For a single-step hybridized reaction, the fabricated kit exhibited significant sensitivity (capacitance change, ΔC = ~2 nF) in detecting the conserved region of the SARS-CoV-2 RNA-dependent RNA polymerase (RdRp) gene with high sensitivity of 0.843 nF/nM. In addition to capacitive measurements, this selective detection was confirmed by the fluorescence image and intensity from a SARS-CoV-2 gene labeled with a fluorescent dye. We also demonstrated that the kits are recyclable by surface ozone treatment using UV irradiation. Thus, these kits could potentially be applied to various types of label-free DNA, thereby acting as rapid, cost-effective biosensors for several diseases.

Aerosol jet printing of biological inks by ultrasonic delivery

Printing is a promising method to reduce the cost of fabricating biomedical devices. While there have been significant advancements in direct-write printing techniques, non-contact printing of biological reagents has been almost exclusively limited to inkjet printing. Motivated by this lacuna, this work investigated aerosol jet printing (AJP) of biological reagents onto a nonfouling polymer brush to fabricate in vitro diagnostic (IVD) assays. The ultrasonication ink delivery process, which had previously been reported to damage DNA molecules, caused no degradation of printed proteins, allowing printing of a streptavidin-biotin binding assay with sub-nanogram ml-1 analytical sensitivity. Furthermore, a carcinoembryogenic antigen IVD was printed and found to have sensitivities in the clinically relevant range (limit of detection of approximately 0.5 ng ml-1 and a dynamic range of approximately three orders of magnitude). Finally, the multi-material printing capabilities of the aerosol jet printer were demonstrated by printing silver nanowires and streptavidin as interconnected patterns in the same print job without removal of the substrate from the printer, which will facilitate the fabrication of mixed-material devices. As cost, versatility, and ink usage become more prominent factors in the development of IVDs, this work has shown that AJP should become a more widely considered technique for fabrication.

Challenges in Electrochemical Aptasensors and Current Sensing Architectures Using Flat Gold Surfaces

In recent years, reagentless aptamer biosensors, named aptasensors, have shown significant advancements. Particularly, electrochemical aptasensors could change the field of biosensors in this era, where digitalization seems to be a common goal of many fields. Biomedical devices are integrating electronic technologies for detecting pathogens, biomolecules, small molecules, and ions, and the physical-chemical properties of nucleic acid aptamers makes them very interesting for these devices. Aptamers can be easily synthesized and functionalized with functional groups for immobilization and with redox chemical groups that allow for the conversion of molecular interactions into electrical signals. Furthermore, non-labeled aptamers have also been utilized. This review presents the current challenges involved in aptasensor architectures based on gold electrodes as transducers.

The Surface Science of Microarray Generation-A Critical Inventory

Microarrays are powerful tools in biomedical research and have become indispensable for high-throughput multiplex analysis, especially for DNA and protein analysis. The basis for all microarray processing and fabrication is surface modification of a chip substrate and many different strategies to couple probe molecules to such substrates have been developed. We present here a critical assessment of typical biochip generation processes from a surface science point of view. While great progress has been made from a molecular biology point of view on the development of qualitative assays and impressive results have been obtained on the detection of rather low concentrations of DNA or proteins, quantitative chip-based assays are still comparably rare. We argue that lack of stable and reliable deposition chemistries has led in many cases to suboptimal quantitative reproducibility, impeded further progress in microarray development and prevented a more significant penetration of microarray technology into the diagnostic market. We suggest that surface-attached hydrogel networks might be a promising strategy to achieve highly sensitive and quantitatively reproducible microarrays.

Surface Functionalization toward Biosensing via Free-Standing Si-OH Bonds on Nonoxidized Silicon Surfaces

Usually hydroxyl groups present on top of oxidized silicon served as binding centers for a silanization reaction toward surface functionalization. In this study, we developed a novel surface functionalization strategy where hydroxyl functionalization on nonoxidized silicon surfaces are obtained. These surfaces were stable for several weeks even in ambient air at room temperature. This high stability indicates a strong spatial isolation of the hydroxyl groups because they keenly tend to undergo a condensation reaction, forming silicon oxide. To prove the applicability of the obtained hydroxylated silicon surface, we further modified the hydroxyl groups with a commonly used silane molecule, (3-aminopropyl)triethoxysilane (APTES). The functional amino groups of the APTES layer bonded to the surface were subsequently altered by N-maleoyl-β-alanin to generate a surface highly specific for the immobilization of thiol-containing biomolecules (like thiolated single-stranded DNA or cysteine-tagged proteins). All modification steps have been investigated by IR spectroscopic ellipsometry measurements.

Miniaturized and Automated Synthesis of Biomolecules-Overview and Perspectives

Chemical synthesis is performed by reacting different chemical building blocks with defined stoichiometry, while meeting additional conditions, such as temperature and reaction time. Such a procedure is especially suited for automation and miniaturization. Life sciences lead the way to synthesizing millions of different oligonucleotides in extremely miniaturized reaction sites, e.g., pinpointing active genes in whole genomes, while chemistry advances different types of automation. Recent progress in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) imaging could match miniaturized chemical synthesis with a powerful analytical tool to validate the outcome of many different synthesis pathways beyond applications in the life sciences. Thereby, due to the radical miniaturization of chemical synthesis, thousands of molecules can be synthesized. This in turn should allow ambitious research, e.g., finding novel synthesis routes or directly screening for photocatalysts. Herein, different technologies are discussed that might be involved in this endeavor. A special emphasis is given to the obstacles that need to be tackled when depositing tiny amounts of materials to many different extremely miniaturized reaction sites.

DNA microarray technology and bioinformatic web services

The pan-genomic microarray technique is used for environmental and/or clinical studies. Although microarray is an accurate and sharp diagnostic tool, the expertized bioinformaticians were able to minimize the outcome biases and maximize the flexibility and accuracy of the technique. The knowledge of bioinformatics plays a key role in association with probe designing and the utilization of correct probe sets and platforms. This technique is divided into two parts as dry lab (in silico studies) and wet lab (in vitro studies). Each part covers the other and are known as complementary divisions. In the case of microarray probe designing, a wide range of software, tools, and databases are necessary. Obviously, the application of right databases, software, and tools decreases the probable biases in the outcomes. Due to the importance of suitable probe designing, this article has focused its look onto a variety of online/offline databases, software, and tools.

Array of multifunctional polymers for localized immobilization of biomolecules on microarray substrates

The performance of microarray assays results from the optimization of several parameters: in particular, the physical-chemical properties of the surface play a pivotal role in determining the robustness of the technology. Usually, microarray substrates are entirely modified with coatings able to bind, covalently or not, bioprobes. Here we present a new, fully automated approach for the immobilization of biomolecules, based on the deposition of pL amounts of water solutions of DMA based copolymers on an uncoated surface, followed by the deposition, on the same spot, of the probe. Starting from a common precursor, polymers with different characteristics and functionalities are obtained by post-polymerization modification and by combining different monomers during the synthesis. This strategy, allows to functionalize and tailor the surface properties of discrete areas of the same array with different chemistries, that coexist on a single substrate. As a consequence, probes with different functionalities are bound simultaneously to neutral, positively, negatively charged, hydrophobic, hydrophilic polymers, in micrometer-sized spots. The proposed polymer array, applicable to both DNA or protein, offers advantages in terms of time and costs reduction, since pretreatment and coating steps are totally avoided, and the requested polymer amount is extremely low. Moreover, it provides a strategy perfectly suitable for miniaturization applicable to integrated biosensors or Lab-on-a-chip devices.

Fluorescence Interference Contrast-enabled structures improve the microarrays performance

Continuous improvements of the fluorescence-based sensitivity and specificity, required for high throughput screening, diagnostics, and molecular biology studies, are usually addressed by better readout systems, or better reporting elements. However, while Fluorescence Interference Contrast (FLIC), which modulates the fluorescence by materials-based parameters, has been used for decades to measure biomolecular interactions at nanometer-precision, e.g., for the study of molecular motors and membrane processes, it has been seldom used for high throughput or diagnostic microdevices. Moreover, the amplification of both the fluorescence signal, modulated by vertically-nano-calibrated structures, and the signal/background, modulated by laterally-micro-calibrated structures, has not been explored. To address this synergy, structures comprising optically transparent silicon oxide, tens of micrometers-wide and with thicknesses in the low hundreds of nanometers, which are able to promote the formation of standing waves if patterned on a reflective material, have been designed, fabricated and tested, for the use in DNA- and protein arrays. The light emitted by a fluorophore placed on top of the structures and reflected by a bottom mirror surface, e.g., silicon, platinum, is physically constrained to a region defined lithographically, both vertically and laterally, i.e., micro-pillars and -wells, resulting in an accurate identification and quantification of fluorescence. The signal/noise ratio on micro-/nano-structured substrates is comparable to that measured on planar substrates, but the physical confinement of the microarray spots results in a considerable increase of the intra-feature uniformity.

Electrochemical Genetic Profiling of Single Cancer Cells

Recent understandings in the development and spread of cancer have led to the realization of novel single cell analysis platforms focused on circulating tumor cells (CTCs). A simple, rapid, and inexpensive analytical platform capable of providing genetic information on these rare cells is highly desirable to support clinicians and researchers alike to either support the selection or adjustment of therapy or provide fundamental insights into cell function and cancer progression mechanisms. We report on the genetic profiling of single cancer cells, exploiting a combination of multiplex ligation-dependent probe amplification (MLPA) and electrochemical detection. Cells were isolated using laser capture and lysed, and the mRNA was extracted and transcribed into DNA. Seven markers were amplified by MLPA, which allows for the simultaneous amplification of multiple targets with a single primer pair, using MLPA probes containing unique barcode sequences. Capture probes complementary to each of these barcode sequences were immobilized on a printed circuit board (PCB) manufactured electrode array and exposed to single-stranded MLPA products and subsequently to a single stranded DNA reporter probe bearing a HRP molecule, followed by substrate addition and fast electrochemical pulse amperometric detection. We present a simple, rapid, flexible, and inexpensive approach for the simultaneous quantification of multiple breast cancer related mRNA markers, with single tumor cell sensitivity.

Synthesis of Clickable Coating Polymers by Postpolymerization Modification: Applications in Microarray Technology

In this paper, we report on the postpolymerization modification (PPM) of a polymer to introduce new functionalities that enable click chemistry reactions for microarray applications. The parent polymer, named copoly(DMA-NAS-MAPS), is composed of N,N-dimethylacrylamide (DMA), a monomer that self-adsorbs onto different materials through weak interactions such as hydrogen bonding or van der Waals forces, 3-(trimethoxysilyl)propyl methacrylate (MAPS) that strengthens the stability of the coating through the formation of covalent bonds with siloxane groups on the surface to be coated, and N-acryloyloxysuccinimide (NAS), an active ester group, highly reactive toward nucleophiles, which enables bioprobe immobilization. This copolymer has been widely exploited to coat surfaces for microarray applications but exhibits some limitations because of the potential hydrolysis of the active ester (NHS ester). The degradation of the NHS ester hampers the use of this coating in some situations, for example, when probe immobilization cannot be accomplished through a microspotting situation, but in large volumes, for example, in microchannel derivatization or micro-/nanoparticle functionalization. To overcome the limitations of NHS esters, we have developed a family of polymers that originate from the common copolymer precursor, by reacting the active ester contained in the polymer chain with a bifunctional amine. In particular, the functional groups introduced in the polymer using PPM enable click chemistry reactions such as azide/alkyne or thiol/maleimide "click" reactions, with suitably modified biomolecules. The advantages of such reactions are quantitative yields, orthogonality of functional groups, and insensitivity of the reaction to pH. The new click functionalities, inserted with quantitative yields, improve the stability of the coating, enabling the attachment of biomolecules directly from a solution and avoiding the spotting of reduced volumes (pL) of probes. Finally, we have demonstrated the applicability of the click surfaces in a highly effective solid-phase PCR for the genotyping of the G12D KRAS mutation.

A DNA array based on clickable lesion-containing hairpin probes for multiplexed detection of base excision repair activities

An electrophoresis-free fluorescent functional assay has been developed to measure DNA repair activities in a miniaturized and parallelized manner.

Evaluating the sensitivity of hybridization-based epigenotyping using a methyl binding domain protein

Hypermethylation of CpG islands in gene promoter regions has been shown to be a predictive biomarker for certain diseases. Most current methods for methylation profiling are not well-suited for clinical analysis. Here, we report the development of an inexpensive device and an epigenotyping assay with a format conducive to multiplexed analysis.

Functionalized Polymer Microgel Particles Enable Customizable Production of Label-Free Sensor Arrays

Probe molecule immobilization onto surfaces is a critical step in the production of many analytical devices, including labeled and label-free microarrays. New methods to increase the density and uniformity of probe deposition have the potential to significantly enhance the ultimate limits of detection and reproducibility. Hydrogel-based materials have been employed in the past to provide a 3D protein-friendly surface for deposition of antibodies and nucleic acids. However, these methods are susceptible to variation during polymerization of the hydrogel scaffold and provide limited opportunities for tuning deposition parameters on an antibody-by-antibody basis. In this work, a versatile hydrogel nanoparticle deposition method was developed for the production of label-free microarrays and tested in the context of antibody-antigen binding. Poly(N-isopropylacrylamide) nanoparticles (PNIPAM) were conjugated to antibodies using an avidin/biotin system and deposited onto surfaces using a noncontact printing system. After drying, these gel spots formed uniform and thin layers <10 nm in height. The conjugates were characterized with dynamic light scattering, scanning electron microscopy, and atomic force microscopy. We tested this format in the context of tumor necrosis factor-alpha (TNF-α) detection via arrayed imaging reflectometry (AIR), a label-free protein microarray method. This method of probe molecule deposition should be generally useful in the production of microarrays for label-free detection.

Base-cleavable microarrays for the characterization of DNA and RNA oligonucleotides synthesized in situ by photolithography

Assessing synthesis efficiency, errors, failed deprotections, and chemical and enzymatic degradation of oligonucleotides on microarrays is essential for improving existing in situ synthesis methods, and for the development of new chemistries. We describe the use of LC-MS to analyse DNA and RNA oligonucleotides deprotected and cleaved under basic conditions from microarrays fabricated using light-directed in situ chemistry. The data yield essential information on array quality and sequence identity.

Improved DNA microarray detection sensitivity through immobilization of preformed in solution streptavidin/biotinylated oligonucleotide conjugates

A novel immobilization approach involving binding of preformed streptavidin/biotinylated oligonucleotide conjugates onto surfaces coated with biotinylated bovine serum albumin is presented. Microarrays prepared according to the proposed method were compared, in terms of detection sensitivity and specificity, with other immobilization schemes employing coupling of biotinylated oligonucleotides onto directly adsorbed surface streptavidin, or sequential coupling of streptavidin and biotinylated oligonucleotides onto a layer of adsorbed biotinylated bovine serum albumin. A comparison was performed employing biotinylated oligonucleotides corresponding to wild- and mutant-type sequences of seven single point mutations of the BRCA1 gene. With respect to the other immobilization protocols, the proposed oligonucleotide immobilization approach offered the highest hybridization signals (at least 5 times higher) and permitted more elaborative washings, thus providing considerably higher discrimination between complimentary and non-complementary DNA sequences for all mutations tested. In addition, the hybridization kinetics were significantly enhanced compared to two other immobilization protocols, permitting PCR sample analysis in less than 40 min. Thus, the proposed oligonucleotide immobilization approach offered improved detection sensitivity and discrimination ability along with considerably reduced analysis time, and it is expected to find wide application in DNA mutation detection.

Photo-attachment of biomolecules for miniaturization on wicking Si-nanowire platform

We demonstrated the surface functionalization of a highly three-dimensional, superhydrophilic wicking substrate using light to immobilize functional biomolecules for sensor or microarray applications. We showed here that the three-dimensional substrate was compatible with photo-attachment and the performance of functionalization was greatly improved due to both increased surface capacity and reduced substrate reflectivity. In addition, photo-attachment circumvents the problems induced by wicking effect that was typically encountered on superhydrophilic three-dimensional substrates, thus reducing the difficulty of producing miniaturized sites on such substrate. We have investigated various aspects of photo-attachment process on the nanowire substrate, including the role of different buffers, the effect of wavelength as well as how changing probe structure may affect the functionalization process. We demonstrated that substrate fabrication and functionalization can be achieved with processes compatible with microelectronics processes, hence reducing the cost of array fabrication. Such functionalization method coupled with the high capacity surface makes the substrate an ideal candidate for sensor or microarray for sensitive detection of target analytes.

Immobilization techniques for microarray: challenges and applications

The highly programmable positioning of molecules (biomolecules, nanoparticles, nanobeads, nanocomposites materials) on surfaces has potential applications in the fields of biosensors, biomolecular electronics, and nanodevices. However, the conventional techniques including self-assembled monolayers fail to position the molecules on the nanometer scale to produce highly organized monolayers on the surface. The present article elaborates different techniques for the immobilization of the biomolecules on the surface to produce microarrays and their diagnostic applications. The advantages and the drawbacks of various methods are compared. This article also sheds light on the applications of the different technologies for the detection and discrimination of viral/bacterial genotypes and the detection of the biomarkers. A brief survey with 115 references covering the last 10 years on the biological applications of microarrays in various fields is also provided.

Hybridisation of N4-methylcytosine-containing amplicons on DNA microarrays

5'-Cy5-labelled PCR amplicons containing the analogue base, N(4)-methylcytosine, instead of cytosines were compared in microarray hybridisation experiments with the corresponding amplicons containing the canonical set of bases, with respect to the intensity of the fluorescence signal obtained, and cross hybridisation to non-corresponding probes. In general, higher hybridisation temperatures resulted in reduced signal intensities, particularly in the case of the N(4)-methylcytosine containing amplicons. At the lower hybridisation temperatures tested (40 °C, 30 °C), these modified amplicons gave about equal or stronger fluorescence signal than the corresponding regular amplicons. With the two GC-richest amplicons tested, in one instance the N(4)-methylated target gave a dramatically higher signal intensity than the unmodified amplicon, interpreted as reflecting the reduced formation of hairpin structures in the target sequence, due to the lower thermodynamic stability of the G:N(4)-methylC base pair, making the target more accessible, while in the other case no hybridisation was observed with either version of the amplicon, probably due to interference from a G-tetrad structure. Both for the regular and the N(4)-methylated amplicons, no significant cross hybridisation was seen in these experiments.

Controlled amino-functionalization by electrochemical reduction of bromo and nitro azobenzene layers bound to Si(111) surfaces

4-Nitrobenzenediazonium (4-NBD) and 4-bromobenzenediazonium (4-BBD) salts were grafted electrochemically onto H-terminated, p-doped silicon (Si) surfaces. Atomic force microscopy (AFM) and ellipsometry experiments clearly showed layer thicknesses of 2-7 nm, which indicate multilayer formation. Decreasing the diazonium salt concentration and the reaction time resulted in a smaller layer thickness, but did not prevent the formation of multilayers. It was demonstrated, mainly by X-ray photoelectron spectroscopy (XPS), that the diazonium salts not only react with the H-terminated Si surface, but also with electrografted phenyl groups via azo-bond formation. These azo bonds can be electrochemically reduced at Ered = -1.5 V, leading to the corresponding amino groups. This reduction resulted in a modest decrease in layer thickness, and did not yield monolayers. This indicates that other coupling reactions, notably a biphenyl coupling, induced by electrochemically produced phenyl radicals, take place as well. In addition to the azo functionalities, the nitro functionalities in electrografted layers of 4-NBD were independently reduced to amino functionalities at a lower potential (Ered = -2.1 V). The presence of amino functionalities on fully reduced layers, both from 4-NBD- and 4-BBD-modified Si, was shown by the presence of fluorine after reaction with trifluoroacetic anhydride (TFAA). This study shows that the electrochemical reduction of azo bonds generates amino functionalities on layers produced by electrografting of aryldiazonium derivatives. In this way multifunctional layers can be formed by employing functional aryldiazonium salts, which is believed to be very practical in the fabrication of sensor platforms, including those made of multi-array silicon nanowires.

BIOPHYSICAL PROPERTIES OF NUCLEIC ACIDS AT SURFACES RELEVANT TO MICROARRAY PERFORMANCE

Both clinical and analytical metrics produced by microarray-based assay technology have recognized problems in reproducibility, reliability and analytical sensitivity. These issues are often attributed to poor understanding and control of nucleic acid behaviors and properties at solid-liquid interfaces. Nucleic acid hybridization, central to DNA and RNA microarray formats, depends on the properties and behaviors of single strand (ss) nucleic acids (e.g., probe oligomeric DNA) bound to surfaces. ssDNA's persistence length, radius of gyration, electrostatics, conformations on different surfaces and under various assay conditions, its chain flexibility and curvature, charging effects in ionic solutions, and fluorescent labeling all influence its physical chemistry and hybridization under assay conditions. Nucleic acid (e.g., both RNA and DNA) target interactions with immobilized ssDNA strands are highly impacted by these biophysical states. Furthermore, the kinetics, thermodynamics, and enthalpic and entropic contributions to DNA hybridization reflect global probe/target structures and interaction dynamics. Here we review several biophysical issues relevant to oligomeric nucleic acid molecular behaviors at surfaces and their influences on duplex formation that influence microarray assay performance. Correlation of biophysical aspects of single and double-stranded nucleic acids with their complexes in bulk solution is common. Such analysis at surfaces is not commonly reported, despite its importance to microarray assays. We seek to provide further insight into nucleic acid-surface challenges facing microarray diagnostic formats that have hindered their clinical adoption and compromise their research quality and value as genomics tools.

An equipment-free polydimethylsiloxane microfluidic spotter for fabrication of microarrays

This paper presents a low-cost, power-free, and easy-to-use spotter system for fabrication of microarrays. The spotter system uses embedded dispensing microchannels combined with a polydimethylsiloxane (PDMS) membrane containing regular arrays of well-defined thru-holes to produce precise, uniform DNA or protein microarrays for disease diagnosis or drug screening. Powered by pre-evacuation of its PDMS substrate, the spotter system does not require any additional components or external equipment for its operation, which can potentially allow low-cost, high-quality microarray fabrication by minimally trained individuals. Polyvinylpyrrolidone was used to modify the PDMS surface to prevent protein adsorption by the microchannels. Experimental results indicate that the PDMS spotter shows excellent printing performance for immobilizing proteins. The measured coefficient of variation (CV) of the diameter of 48 spots was 2.63% and that of the intensity within one array was 2.87%. Concentration gradient experiments revealed the superiority of the immobilization density of the PDMS spotter over the conventional pin-printing method. Overall, this low-cost, power-free, and easy-to-use spotting system provides an attractive new method to fabricate microarrays.

Effect of Target Length on Specificity and Sensitivity of Oligonucleotide Microarrays: A Comparison between Dendrimer and Modified PCR based Labelling Methods

DNA microarrays are widely used as end point detectors for gene expression analysis. Several methods have been developed for target labelling to enable quantification but without taking target length into consideration. Here we highlight the importance of choosing the optimum target length that would ensure specificity without compromising sensitivity of the assay. For this, eight plasmids that are identical to each other except for a closely related 23 bp unique reporter (UR) sequence were used to examine the hybridization efficiency for these URs. Targets of various lengths were generated and labelled as follows: full length and 330 bases transcripts using a dendrimer labelling method, 120 bp amplicons by the modified PCR end labelling method and synthetic labelled targets of 33 bases. This report also shows the advantages of using the modified PCR method over other labelling methods in generating labelled amplicons of the desired lengths to maximize hybridization efficiency.

Next revolution in the molecular theranostics of infectious diseases: microfabricated systems for personalized medicine

The molecular diagnosis of infectious diseases is currently going through a revolution sustained by the regulatory approval of amplification tests that have been shown to be equivalent or superior to existing gold standard methods. The recent approval of a microarray system for the pharmacogenomic profiling of cytochrome P450-mediated drug metabolism is paving the way to novel, rapid, sensitive, robust and economical microfabricated systems for point-of-care diagnostics, which are utilized closer and closer to the patient's bedside. These systems will enable the multiparametric genetic evaluation of several medical conditions, including infectious diseases. This forecoming revolution will position molecular theranostics in a broader integrated view of personalized medicine, which exploits genetic information from microbes and human hosts to optimize patient management and disease treatment.

Influence of the relative humidity on the morphology of inkjet printed spots of IgG on a non-porous substrate

During the drying of inkjet printed droplets, the solute particles (IgG-Alexa-635 molecules) in the drop may distribute unevenly on the substrate, resulting in a “coffee-stain” spot morphology.

A new microarray platform for whole-genome expression profiling of Mycobacterium tuberculosis

Microarrays have allowed gene expression profiling to progress from the gene level to the genome level, and oligonucleotide microarrays have become the platform of choice for large-scale, targeted gene expression studies. cDNA arrays and spotted oligonucleotide arrays have gradually given way to in situ synthesized oligonucleotide-based DNA microarrays for whole-genome expression profiling. With the identification of new coding and regulatory sequences, it is imperative that microarrays be updated to enable more complete expression profiling of genomes. We report here a new in situ synthesized oligonucleotide-based microarray platform for Mycobacterium tuberculosis that has been updated for the latest genome information and incorporates hitherto unannotated genes with described biological functions. This microarray has greater coverage of mycobacterial genes than any other array reported to date. We have also evaluated different labeled-target preparation methods and hybridization conditions for this new microarray to obtain high quality data and reproducible results. The new design has been rigorously validated for its specificity and performance using samples isolated from mycobacteria grown under different environment conditions. Further, the quality of the generated data has been compared with published data and is superior to that obtained using spotted oligonucleotide microarrays.

Detection of single DNA molecule hybridization on a surface by atomic force microscopy

Improving the detection of DNA hybridization is a critical issue for several challenging applications encountered in microarray and biosensor domains. Herein, it is demonstrated that hybridization between complementary single-stranded DNA (ssDNA) molecules loosely adsorbed on a mica surface can be achieved thanks to fine-tuning of the composition of the hybridization buffer. Single-molecule DNA hybridization occurs in only a few minutes upon encounters of freely diffusing complementary strands on the mica surface. Interestingly, the specific hybridization between complementary ssDNA is not altered in the presence of large amounts of nonrelated DNA. The detection of single-molecule DNA hybridization events is performed by measuring the contour length of DNA in atomic force microscopy images. Besides the advantage provided by facilitated diffusion, which promotes hybridization between probes and targets on mica, the present approach also allows the detection of single isolated DNA duplexes and thus requires a very low amount of both probe and target molecules.

Integrated imaging instrument for self-calibrated fluorescence protein microarrays

Protein microarrays, or multiplexed and high-throughput assays, monitor multiple protein binding events to facilitate the understanding of disease progression and cell physiology. Fluorescence imaging is a popular method to detect proteins captured by immobilized probes with high sensitivity and specificity. Reliability of fluorescence assays depends on achieving minimal inter- and intra-assay probe immobilization variation, an ongoing challenge for protein microarrays. Therefore, it is desirable to establish a label-free method to quantify the probe density prior to target incubation to calibrate the fluorescence readout. Previously, a silicon oxide on silicon chip design was introduced to enhance the fluorescence signal and enable interferometric imaging to self-calibrate the signal with the immobilized probe density. In this paper, an integrated interferometric reflectance imaging sensor and wide-field fluorescence instrument is introduced for sensitive and calibrated microarray measurements. This platform is able to analyze a 2.5 mm × 3.4 mm area, or 200 spots (100 μm diameter with 200 μm pitch), in a single field-of-view.

Biorecognition by DNA oligonucleotides after exposure to photoresists and resist removers

Combining biological molecules with integrated circuit technology is of considerable interest for next generation sensors and biomedical devices. Current lithographic microfabrication methods, however, were developed for compatibility with silicon technology rather than bioorganic molecules, and consequently it cannot be assumed that biomolecules will remain attached and intact during on-chip processing. Here, we evaluate the effects of three common photoresists (Microposit S1800 series, PMGI SF6, and Megaposit SPR 3012) and two photoresist removers (acetone and 1165 remover) on the ability of surface-immobilized DNA oligonucleotides to selectively recognize their reverse-complementary sequence. Two common DNA immobilization methods were compared: adsorption of 5'-thiolated sequences directly to gold nanowires and covalent attachment of 5'-thiolated sequences to surface amines on silica coated nanowires. We found that acetone had deleterious effects on selective hybridization as compared to 1165 remover, presumably due to incomplete resist removal. Use of the PMGI photoresist, which involves a high temperature bake step, was detrimental to the later performance of nanowire-bound DNA in hybridization assays, especially for DNA attached via thiol adsorption. The other three photoresists did not substantially degrade DNA binding capacity or selectivity for complementary DNA sequences. To determine whether the lithographic steps caused more subtle damage, we also tested oligonucleotides containing a single base mismatch. Finally, a two-step photolithographic process was developed and used in combination with dielectrophoretic nanowire assembly to produce an array of doubly contacted, electrically isolated individual nanowire components on a chip. Postfabrication fluorescence imaging indicated that nanowire-bound DNA was present and able to selectively bind complementary strands.

Rapid mastitis detection assay on porous nitrocellulose membrane slides

We have developed a rapid mastitis detection test based on the immobilization of tag-specific antibody molecules, the binding of double-tagged amplicons, and as a secondary signal a conjugate of black carbon nanoparticles having molecules of a fusion protein of neutrAvidin and alkaline phosphatase at their surface. The antibodies were inkjet printed onto three different nitrocellulose membrane slides, Unisart (Sartorius), FAST (GE Whatman), and Oncyte-Avid (Grace-Biolabs), and the final assay signals on these slides were compared. The blackness of the spots was determined by flatbed scanning and assessment of the pixel gray volume using TotalLab image analysis software. The black spots could be easily read by the naked eye. We successfully demonstrated the detection of specific amplicons from mastitis-causing pathogens in less than 3 h. Using a similar protocol, we also showed that it was possible to detect specific amplicons from four different mastitis-causing pathogens (six strains) on the same pad. The influence of two different printing buffers, phosphate-buffered saline (pH 7.4) and carbonate buffer (pH 9.6), on the functionality of the primary antibodies was also compared.

Drop drying on surfaces determines chemical reactivity - the specific case of immobilization of oligonucleotides on microarrays

BACKGROUND

Drop drying is a key factor in a wide range of technical applications, including spotted microarrays. The applied nL liquid volume provides specific reaction conditions for the immobilization of probe molecules to a chemically modified surface.

RESULTS

We investigated the influence of nL and μL liquid drop volumes on the process of probe immobilization and compare the results obtained to the situation in liquid solution. In our data, we observe a strong relationship between drop drying effects on immobilization and surface chemistry. In this work, we present results on the immobilization of dye labeled 20mer oligonucleotides with and without an activating 5'-aminoheptyl linker onto a 2D epoxysilane and a 3D NHS activated hydrogel surface.

CONCLUSIONS

Our experiments identified two basic processes determining immobilization. First, the rate of drop drying that depends on the drop volume and the ambient relative humidity. Oligonucleotides in a dried spot react unspecifically with the surface and long reaction times are needed. 3D hydrogel surfaces allow for immobilization in a liquid environment under diffusive conditions. Here, oligonucleotide immobilization is much faster and a specific reaction with the reactive linker group is observed. Second, the effect of increasing probe concentration as a result of drop drying. On a 3D hydrogel, the increasing concentration of probe molecules in nL spotting volumes accelerates immobilization dramatically. In case of μL volumes, immobilization depends on whether the drop is allowed to dry completely. At non-drying conditions, very limited immobilization is observed due to the low oligonucleotide concentration used in microarray spotting solutions. The results of our study provide a general guideline for microarray assay development. They allow for the initial definition and further optimization of reaction conditions for the immobilization of oligonucleotides and other probe molecule classes to different surfaces in dependence of the applied spotting and reaction volume.

Scaling advantages and constraints in miniaturized capture assays for single cell protein analysis

Measuring protein expression in single cells is the basis of single cell proteomics. The sensitivity and dynamic range of a single cell immunoassay should ideally be such that proteins that are expressed between 1-10(6) copies per cell can be detected and counted. We have investigated the effect of miniaturizing antibody microarrays by reducing capture spot sizes from 100 μm to 15 μm using dip-pen nanolithography. We demonstrate that protocols developed for printing and passivating antibody capture spots using conventional pin-based contact printing can be directly transferred to dip-pen lithography whilst retaining the capture activity per unit area. Using a simple kinetic model, we highlight how the limit of detection and dynamic range of a sandwich immunoassay, respectively, increase and decrease when spot size is reduced. However, we show that reducing spot size is more effective than increasing assay chamber volume when seeking to multiplex such a microfluidic immunoassay. Although we make particular reference to single cell microfluidic immunoassays, the topics discussed here are applicable to capture assays in general.

Angle-resolved XPS analysis and characterization of monolayer and multilayer silane films for DNA coupling to silica

We measure silane density and Sulfo-EMCS cross-linker coupling efficiency on aminosilane films by high-resolution X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) measurements. We then characterize DNA immobilization and hybridization on these films by (32)P-radiometry. We find that the silane film structure controls the efficiency of the subsequent steps toward DNA hybridization. A self-limited silane monolayer produced from 3-aminopropyldimethylethoxysilane (APDMES) provides a silane surface density of ~3 nm(-2). Thin (1 h deposition) and thick (19 h deposition) multilayer films are generated from 3-aminopropyltriethoxysilane (APTES), resulting in surfaces with increased roughness compared to the APDMES monolayer. Increased silane surface density is estimated for the 19 h APTES film, due to a ∼32% increase in surface area compared to the APDMES monolayer. High cross-linker coupling efficiencies are measured for all three silane films. DNA immobilization densities are similar for the APDMES monolayer and 1 h APTES. However, the DNA immobilization density is double for the 19 h APTES, suggesting that increased surface area allows for a higher probe attachment. The APDMES monolayer has the lowest DNA target density and hybridization efficiency. This is attributed to the steric hindrance as the random packing limit is approached for DNA double helices (dsDNA, diameter ≥ 2 nm) on a plane. The heterogeneity and roughness of the APTES films reduce this steric hindrance and allow for tighter packing of DNA double helices, resulting in higher hybridization densities and efficiencies. The low steric hindrance of the thin, one to two layer APTES film provides the highest hybridization efficiency of nearly 88%, with 0.21 dsDNA/nm(2). The XPS data also reveal water on the cross-linker-treated surface that is implicated in device aging.