Biological performances of collagen-based scaffolds for vascular tissue engineering

Oxidized Bacterial Cellulose Membranes Immobilized with Papain for Dressing Applications: Physicochemical and In Vitro Biological Properties

This research consolidates our group's advances in developing a therapeutic dressing with innovative enzymatic debridement, focusing on the physicochemical and in vitro biological properties of papain immobilized in wet oxidized bacterial cellulose (OxBC-Papain) dressing. OxBC membranes were produced with Komagataeibacter hansenii oxidized with NaIO4, and papain was immobilized on them. They were characterized in terms of enzyme stability (over 100 days), absorption capacity, water vapor transmission (WVT), hemocompatibility, cytotoxicity, and cell adhesion. The OxBC-Papain membrane showed 68.5% proteolytic activity after 100 days, demonstrating the benefit of using the OxBC wet membrane for papain stability. It had a WVT rate of 678 g/m2·24 h and cell viability of 99% and 86% for L929 and HaCat cells, respectively. The membranes exhibited non-hemolytic behavior and maintained 26% clotting capacity after 1 h. The wet OxBC-Papain membrane shows significant potential as a natural biomolecule-based therapeutic dressing for wound care, offering efficient debridement, moisture maintenance, exudate absorption, gas exchange, and hemostasis without cytotoxic effects or cell adhesion to the dressing. Further research, especially using in vivo models, is needed to assess its efficacy in inducing epithelialization. This study advances stomatherapy knowledge, providing a cost-effective solution for enzymatic debridement in healthcare.

A Comparison of Three-Layer and Single-Layer Small Vascular Grafts Manufactured via the Roto-Evaporation Method

This study used the roto-evaporation technique to engineer a 6 mm three-layer polyurethane vascular graft (TVG) that mimics the architecture of human coronary artery native vessels. Two segmented polyurethanes were synthesized using lysine (SPUUK) and ascorbic acid (SPUAA), and the resulting materials were used to create the intima and adventitia layers, respectively. In contrast, the media layer of the TVG was composed of a commercially available polyurethane, Pearlbond 703 EXP. For comparison purposes, single-layer vascular grafts (SVGs) from individual polyurethanes and a polyurethane blend (MVG) were made and tested similarly and evaluated according to the ISO 7198 standard. The TVG exhibited the highest circumferential tensile strength and longitudinal forces compared to single-layer vascular grafts of lower thicknesses made from the same polyurethanes. The TVG also showed higher suture and burst strength values than native vessels. The TVG withstood up to 2087 ± 139 mmHg and exhibited a compliance of 0.15 ± 0.1%/100 mmHg, while SPUUK SVGs showed a compliance of 5.21 ± 1.29%/100 mmHg, akin to coronary arteries but superior to the saphenous vein. An indirect cytocompatibility test using the MDA-MB-231 cell line showed 90 to 100% viability for all polyurethanes, surpassing the minimum 70% threshold needed for biomaterials deemed cytocompatibility. Despite the non-cytotoxic nature of the polyurethane extracts when grown directly on the surface, they displayed poor fibroblast adhesion, except for SPUUK. All vascular grafts showed hemolysis values under the permissible limit of 5% and longer coagulation times.

Breaking the Limit of Cardiovascular Regenerative Medicine: Successful 6-Month Goat Implant in World's First Ascending Aortic Replacement Using Biotube Blood Vessels

This study investigated six-month outcomes of first models of ascending aortic replacement. The molds used to produce the Biotube were implanted subcutaneously in goats. After 2-3 months, the molds were explanted to obtain the Biotubes (inner diameter, 12 mm; wall thickness, 1.5 mm). Next, we performed ascending aortic replacement using the Biotube in five allogenic goats. At 6 months, the animals underwent computed tomography (CT) and histologic evaluation. As a comparison, we performed similar surgeries using glutaraldehyde-fixed autologous pericardial rolls or pig-derived heterogenous Biotubes. At 6 months, CT revealed no aneurysmalization of the Biotube or pseudoaneurysm formation. The histologic evaluation showed development of endothelial cells, smooth muscle cells, and elastic fibers along the Biotube. In the autologous pericardium group, there was no evidence of new cell development, but there was calcification. The histologic changes observed in the heterologous Biotube group were similar to those in the allogenic Biotube group. However, there was inflammatory cell infiltration in some heterologous Biotubes. Based on the above, we could successfully create the world's first Biotube-based ascending aortic replacement models. The present results indicate that the Biotube may serve as a scaffold for aortic tissue regeneration.

Vaginal reconstruction by collagen scaffolds loaded with vaginal epithelial and smooth muscle cells in pigs

In women, a healthy and functional vagina is important for the maintenance of a good quality of life. Various factors, including congenital anomalies, cancer, trauma, infections, inflammation, or iatrogenic injuries, can lead to damage or loss of the vaginal structure, necessitating repair or replacement. Often, such reconstruction procedures involve the use of nonvaginal tissue substitutes, like segments of the large intestine or skin, which are less than ideal both anatomically and functionally. Therefore, there is an urgent need to develop new methods of vaginal reconstruction. In this study, we established a new method for isolation and expansion of vaginal epithelial and smooth muscle cells. Subsequently, collagen scaffolds designed for vaginal reconstruction were loaded with vaginal epithelial and smooth muscle cells in vitro and tested in vivo using the vaginal excision pig model. The results showed that the collagen scaffold loaded with vaginal epithelial and smooth muscle cells significantly promotes the reconstruction of the vagina compared with small intestinal submucosa (SIS) membrane or bare collagen scaffold. Notably, the reconstructed vaginal tissues exhibit remarkable similarity to their normal counterparts, encompassing not only the vaginal epithelium and smooth muscle but also the intricate networks of blood vessels and nerves. These compelling results underscore the feasibility of a tissue engineering approach in vaginal reconstruction, offering promising prospects for improving the quality of life in affected individuals.

Human Coronary Artery Endothelial Cell Response to Porphyromonas gingivalis W83 in a Collagen Three-Dimensional Culture Model

P. gingivalis has been reported to be an endothelial cell inflammatory response inducer that can lead to endothelial dysfunction processes related to atherosclerosis; however, these studies have been carried out in vitro in cell culture models on two-dimensional (2D) plastic surfaces that do not simulate the natural environment where pathology develops. This work aimed to evaluate the pro-inflammatory response of human coronary artery endothelial cells (HCAECs) to P. gingivalis in a 3D cell culture model compared with a 2D cell culture. HCAECs were cultured for 7 days on type I collagen matrices in both cultures and were stimulated at an MOI of 1 or 100 with live P. gingivalis W83 for 24 h. The expression of the genes COX-2, eNOS, and vWF and the levels of the pro-inflammatory cytokines thromboxane A2 (TXA-2) and prostaglandin I2 (PGI2) were evaluated. P. gingivalis W83 in the 2D cell culture increased IL-8 levels at MOI 100 and decreased MCP-1 levels at both MOI 100 and MOI 1. In contrast, the 3D cell culture induced an increased gene expression of COX-2 at both MOIs and reduced MCP-1 levels at MOI 100, whereas the gene expression of eNOS, vWF, and IL-8 and the levels of TXA2 and PGI2 showed no significant changes. These data suggest that in the collagen 3D culture model, P. gingivalis W83 induces a weak endothelial inflammatory response.

3D-Bioprinted GelMA Scaffold with ASCs and HUVECs for Engineering Vascularized Adipose Tissue

The purpose of tissue engineering is to reconstruct parts of injured tissues and to resolve the shortage of organ donations. However, the main concern is the limited size of engineered tissue due to insufficient oxygen and nutrition distribution in large three-dimensional (3D) tissue constructs. To provide better support for cells inside the scaffolds, the vascularization of blood vessels within the scaffold could be a solution. This study compared the effects of different culturing systems using human adipose tissue-derived stem/stromal cells (ASCs), human umbilical vein endothelial cells (HUVECs), and coculture of ASCs and HUVECs in 3D-bioprinted gelatin methacrylate (GelMA) hydrogel constructs. The in vitro results showed that the number of live cells was highest in the coculture of ASCs and HUVECs in the GelMA hydrogel after culturing for 21 days. Additionally, the tubular structure was the most abundant in the GelMA hydrogel, containing both ASCs and HUVECs. In the in vivo test, blood vessels were present in both the HUVECs and the coculture of ASCs and HUVECs hydrogels implanted in mice. However, the blood vessel density was the highest in the HUVEC and ASC coculture groups. These findings indicate that the 3D-bioprinted GelMA hydrogel coculture system could be a promising biomaterial for large tissue engineering applications.

Resorbable Biomaterials Used for 3D Scaffolds in Tissue Engineering: A Review

This article provides a thorough overview of the available resorbable biomaterials appropriate for producing replacements for damaged tissues. In addition, their various properties and application possibilities are discussed as well. Biomaterials are fundamental components in tissue engineering (TE) of scaffolds and play a critical role. They need to exhibit biocompatibility, bioactivity, biodegradability, and non-toxicity, to ensure their ability to function effectively with an appropriate host response. With ongoing research and advancements in biomaterials for medical implants, the objective of this review is to explore recently developed implantable scaffold materials for various tissues. The categorization of biomaterials in this paper includes fossil-based materials (e.g., PCL, PVA, PU, PEG, and PPF), natural or bio-based materials (e.g., HA, PLA, PHB, PHBV, chitosan, fibrin, collagen, starch, and hydrogels), and hybrid biomaterials (e.g., PCL/PLA, PCL/PEG, PLA/PEG, PLA/PHB PCL/collagen, PCL/chitosan, PCL/starch, and PLA/bioceramics). The application of these biomaterials in both hard and soft TE is considered, with a particular focus on their physicochemical, mechanical, and biological properties. Furthermore, the interactions between scaffolds and the host immune system in the context of scaffold-driven tissue regeneration are discussed. Additionally, the article briefly mentions the concept of in situ TE, which leverages the self-renewal capacities of affected tissues and highlights the crucial role played by biopolymer-based scaffolds in this strategy.

Research progress of stem cell therapy for endometrial injury

Endometrial damage is an important factor leading to infertility and traditional conventional treatments have limited efficacy. As an emerging technology in recent years, stem cell therapy has provided new hope for the treatment of this disease. By comparing the advantages of stem cells from different sources, it is believed that menstrual blood endometrial stem cells have a good application prospect as a new source of stem cells. However, the clinical utility of stem cells is still limited by issues such as colonization rates, long-term efficacy, tumor formation, and storage and transportation. This paper summarizes the mechanism by which stem cells repair endometrial damage and clarifies the material basis of their effects from four aspects: replacement of damaged sites, paracrine effects, interaction with growth factors, and other new targets. According to the pathological characteristics and treatment requirements of intrauterine adhesion (IUA), the research work to solve the above problems from the aspects of functional bioscaffold preparation and multi-functional platform construction is also summarized. From the perspective of scaffold materials and component functions, this review will provide a reference for comprehensively optimizing the clinical application of stem cells.

Highly sensitive Curcumin-conjugated nanotheranostic platform for detecting amyloid-beta plaques by magnetic resonance imaging and reversing cognitive deficits of Alzheimer's disease via NLRP3-inhibition

BACKGROUND

Alzheimer's disease (AD) is the most common neurodegenerative disorder without effective therapy and lack diagnosis strategy for preclinical AD patients. There is an urgent need for development of both early diagnosis and therapeutic intervention of AD.

RESULTS

Herein, we developed a nanotheranostics platform consisting of Curcumin (Cur), an anti-inflammatory molecule, and superparamagnetic iron oxide (SPIO) nanoparticles encapsulated by diblock 1,2-dio-leoyl-sn-glycero-3-phosphoethanolamine-n-[poly(ethylene glycol)] (DSPE-PEG) that are modified with CRT and QSH peptides on its surface. Furthermore, we demonstrated that this multifunctional nanomaterial efficiently reduced β-amyloid plaque burden specifically in APP/PS1 transgenic mice, with the process noninvasively detected by magnetic resonance imaging (MRI) and the two-dimensional MRI images were computed into three-dimension (3D) plot. Our data demonstrated highly sensitive in vivo detection of β-amyloid plaques which more closely revealed real deposition of Aβ than previously reported and we quantified the volumes of plaques for the first time based on 3D plot. In addition, memory deficits of the mice were significantly rescued, probably related to inhibition of NLR Family Pyrin Domain Containing 3 (NLRP3) inflammasomes.

CONCLUSIONS

Gathered data demonstrated that this theranostic platform may have both early diagnostic and therapeutic potential in AD.

Collagen Modified Anisotropic PLA Scaffold as a base for Peripheral Nerve Regeneration

Reconstruction of damaged nerves remains a significant unmet challenge in clinical medicine. Topographical and mechanical stimulations play important roles to repair peripheral nerve injury. The synergistic effects of topography and mechanical rigidity may significantly accelerate nerve regeneration. In this work, we developed a nerve-guiding collagen/polylactic acid (PLA) electrospun scaffold to facilitate peripheral nerve repair. The obtained anisotropic PLA electrospun scaffolds simulated the directional arranged structure of nerve realistically and promoted axonal regeneration after sciatic nerve injury when compared with the isotropic PLA electrospun scaffolds. Moreover, the collagen-modified PLA electrospun scaffolds further provided sufficient mechanical support and favorable microenvironment for axon regeneration. In addition, we observed that collagen-modified PLA electrospun scaffolds facilitated the axon regeneration by regulating YAP molecular pathway. Taken together, we engineered collagen-modified anisotropic PLA electrospun scaffolds may be a potential candidate to combine topography and mechanical rigidity for peripheral nerve regeneration. This article is protected by copyright. All rights reserved.

Recent scaffold-based tissue engineering approaches in premature ovarian failure treatment

Recently, tissue engineering and regenerative medicine have received significant attention with outstanding advances. The main scope of this technology is to recover the damaged tissues and organs or to maintain and improve their function. One of the essential fields in tissue engineering is scaffold designing and construction, playing an integral role in damaged tissues reconstruction and repair. However, premature ovarian failure (POF) is a disorder causing many medical and psychological problems in women. POF treatment using tissue engineering and various scaffold has recently made tremendous and promising progress. Due to the importance of the subject, we have summarized the recently examined scaffolds in the treatment of POF in this review.

A novel small diameter nanotextile arterial graft is associated with surgical feasibility and safety and increased transmural endothelial ingrowth in pig

Globally, millions of patients are affected by myocardial infarction or lower limb gangrene/amputation due to atherosclerosis. Available surgical treatment based on vein and synthetic grafts provides sub-optimal benefits. We engineered a highly flexible and mechanically robust nanotextile-based vascular graft (NanoGraft) by interweaving nanofibrous threads of poly-L-lactic acid to address the unmet need. The NanoGrafts were rendered impervious with selective fibrin deposition in the micropores by pre-clotting. The pre-clotted NanoGrafts (4 mm diameter) and ePTFE were implanted in a porcine carotid artery replacement model. The fibrin-laden porous milieu facilitated rapid endothelization by the transmural angiogenesis in the NanoGraft. In-vivo patency of NanoGrafts was 100% at 2- and 4-weeks, with no changes over time in lumen size, flow velocities, and minimal foreign-body inflammatory reaction. However, the patency of ePTFE at 2-week was 66% and showed marked infiltration, neointimal thickening, and poor host tissue integration. The study demonstrates the in-vivo feasibility and safety of a thin-layered vascular prosthesis, viz., NanoGraft, and its potential superiority over the commercial ePTFE.

Decellularized bovine aorta as a promising 3D elastin scaffold for vascular tissue engineering applications

Aim: To evaluate the suitability of using aorta elastin scaffold, in combination with human adipose-derived mesenchymal stem cells (hAd-MSCs), as an approach for cardiovascular tissue engineering. Materials & Methods: Human adipose-derived MSCs were seeded on elastin samples of decellularized bovine aorta. The samples were cultured in vitro to investigate the inductive effects of this scaffold on the cells. The results were evaluated using histological, and immunohistochemical methods, as well as MTT assay, DNA content, reverse transcription-PCR and scanning electron microscopy. Results: Histological staining and DNA content confirmed the efficacy of decellularization procedure (82% DNA removal). MTT assay showed the construct's ability to support cell viability and proliferation. Cell differentiation was confirmed by reverse transcription-PCR and positive immunohistochemistry for alfa smooth muscle actin and von Willebrand. Conclusion: The prepared aortic elastin samples act as a potential scaffold, in combination with MSCs, for applications in cardiovascular tissue engineering. Further experiments in animal models are required to confirm this.

Clinical application of collagen membrane with umbilical cord-derived mesenchymal stem cells to repair nasal septal perforation

Objective. We aimed to investigate the clinical efficacy of collagen membrane with umbilical cord-derived mesenchymal stem cells in the endoscopic repair of nasal septal perforation.Methods.We performed a prospective clinical trial between March 2017 and October 2019. Nasal septal perforations were repaired by the endoscopic sandwich technique with the collagen membrane and umbilical cord-derived mesenchymal stem cells. These patients were followed up postoperatively. Their outcomes were comprehensively evaluated by assessing the healing process of the perforations, the visual analog scale (VAS) for nasal discomfort, and the nasal mucociliary transit time (MTT) for the regenerated nasal mucosa.Results. Our study included a total of eight patients with nasal septal perforation (six males and two females, age 36.6 ± 12.8 years, diameter of perforation 1.0 ± 0.2 cm). Seven patients successfully underwent surgical repair. These patients had significantly improved VAS scores 1 month after the operations (1.1 ± 0.4) compared with the preoperative period (5.9 ± 0.7) (P< 0.05). Although the nasal MTT in the nasal septum and the inferior turbinate surface were within the normal limits before the operation and at 1 month after the operation, the postoperative transit time (11.1 ± 2.0 m) was significantly shorter than the preoperative transit time (12.1 ± 2.4 m) (P< 0.05). There were no recurrences of perforation, scab formations, or epistaxis after the operation.Conclusions. The application of the collagen membrane with umbilical cord-derived mesenchymal stem cells is a simple and feasible endoscopic procedure to repair perforated nasal septa and restore satisfactory functional mucosa.

Development of photo-crosslinkable collagen hydrogel building blocks for vascular tissue engineering applications: A superior alternative to methacrylated gelatin?

The present work targets the development of collagen-based hydrogel precursors, functionalized with photo-crosslinkable methacrylamide moieties (COL-MA), for vascular tissue engineering (vTE) applications. The developed materials were physico-chemically characterized in terms of crosslinking kinetics, degree of modification/conversion, swelling behavior, mechanical properties and in vitro cytocompatibility. The collagen derivatives were benchmarked to methacrylamide-modified gelatin (GEL-MA), due to its proven track record in the field of tissue engineering. To the best of our knowledge, this is the first paper in its kind comparing these two methacrylated biopolymers for vTE applications. For both gelatin and collagen, two derivatives with varying degrees of substitutions (DS) were developed by altering the added amount of methacrylic anhydride (MeAnH). This led to photo-crosslinkable derivatives with a DS of 74 and 96% for collagen, and a DS of 73 and 99% for gelatin. The developed derivatives showed high gel fractions (i.e. 74% and 84%, for the gelatin derivatives; 87 and 83%, for the collagen derivatives) and an excellent crosslinking efficiency. Furthermore, the results indicated that the functionalization of collagen led to hydrogels with tunable mechanical properties (i.e. storage moduli of [4.8-9.4 kPa] for the developed COL-MAs versus [3.9-8.4 kPa] for the developed GEL-MAs) along with superior cell-biomaterial interactions when compared to GEL-MA. Moreover, the developed photo-crosslinkable collagens showed superior mechanical properties compared to extracted native collagen. Therefore, the developed photo-crosslinkable collagens demonstrate great potential as biomaterials for vTE applications.

Reconstruction of Vascular and Urologic Tubular Grafts by Tissue Engineering

Tissue engineering is one of the most promising scientific breakthroughs of the late 20th century. Its objective is to produce in vitro tissues or organs to repair and replace damaged ones using various techniques, biomaterials, and cells. Tissue engineering emerged to substitute the use of native autologous tissues, whose quantities are sometimes insufficient to correct the most severe pathologies. Indeed, the patient’s health status, regulations, or fibrotic scars at the site of the initial biopsy limit their availability, especially to treat recurrence. This new technology relies on the use of biomaterials to create scaffolds on which the patient’s cells can be seeded. This review focuses on the reconstruction, by tissue engineering, of two types of tissue with tubular structures: vascular and urological grafts. The emphasis is on self-assembly methods which allow the production of tissue/organ substitute without the use of exogenous material, with the patient’s cells producing their own scaffold. These continuously improved techniques, which allow rapid graft integration without immune rejection in the treatment of severely burned patients, give hope that similar results will be observed in the vascular and urological fields.

Combustion Behavior and Thermal Degradation Properties of Wood Impregnated with Intumescent Biomass Flame Retardants: Phytic Acid, Hydrolyzed Collagen, and Glycerol

Wood is a natural renewable material with a porous structure widely used in construction, furniture, and interior decoration, yet its intrinsic flammability poses safety risks. Therefore, environmentally friendly flame retardants have received increasing attention. In this study, a water-soluble flame retardant, consisting of bio-resourced phytic acid (PA), hydrolyzed collagen (HC), and glycerol (GL), was used to improve the flame retardancy of wood ("PHG/wood") through full cell vacuum-pressure impregnation. Morphology and Fourier transform infrared analysis results show that the flame retardant impregnated the wood and adhered evenly to the wood vessels. A PA/HC/GL ratio of 3:1:1 (concentration of the flame retardant solution = 30%) maximized the limiting oxygen index (LOI, 41%) and weight gain (51.32%) for PHG-C30/wood. The flame retardant formed an expansive layer after heating, and the treated wood showed an improved combustion safety performance such that the fire performance index and residue of PHG-C30/wood were 75 and 126.8% higher compared with that of untreated wood, respectively. The peak and total heat release were also significantly reduced by 54.7 and 47.7%, respectively. The PHG/wood exhibited good carbon-forming performance and a high degree of graphitization after combustion. The dense carbon layer provides condensed phase protective action, and non-combustible volatile gases, such as H₂O, CO₂, and NH₃, are released simultaneously to dilute the fuel load in the gas phase. Thus, PHG is shown to be an effective flame retardant for wood.

Preparation of PU/Fibrin Vascular Scaffold with Good Biomechanical Properties and Evaluation of Its Performance in vitro and in vivo

PURPOSE

The development of tissue-engineered blood vessels provides a new source of donors for coronary artery bypass grafting and peripheral blood vessel transplantation. Fibrin fiber has good biocompatibility and is an ideal tissue engineering vascular scaffold, but its mechanical property needs improvement.

METHODS

We mixed polyurethane (PU) and fibrin to prepare the PU/fibrin vascular scaffolds by using electrospinning technology in order to enhance the mechanical properties of fibrin scaffold. We investigated the morphological, mechanical strength, hydrophilicity, degradation, blood and cell compatibility of PU/fibrin (0:100), PU/fibrin (5:95), PU/fibrin (15:85) and PU/fibrin (25:75) vascular scaffolds. Based on the results in vitro, PU/fibrin (15:85) was selected for transplantation in vivo to repair vascular defects, and the extracellular matrix formation, vascular remodeling, and immune response were evaluated.

RESULTS

The results indicated that the fiber diameter of the PU/fibrin (15:85) scaffold was about 712nm. With the increase of PU content, the mechanical strength of the composite scaffolds increased, however, the degradation rate decreased gradually. The PU/fibrin scaffold showed good hydrophilicity and hemocompatibility. PU/fibrin (15:85) vascular scaffold could promote the adhesion and proliferation of mesenchymal stromal cells (MSCs). Quantitative RT-PCR experimental results showed that the expression of collagen, survivin and vimentin genes in PU/fibrin (15:85) was higher than that in PU/fibrin (25:75). The results in vivo indicated the mechanical properties and compliance of PU/fibrin grafts could meet clinical requirements and the proportion of thrombosis or occlusion was significantly lower. The graft showed strong vasomotor response, and the smooth muscle cells, endothelial cells, and ECM deposition of the neoartery were comparable to that of native artery after 3 months. At 3 months, the amount of macrophages in PU/fibrin grafts was significantly lower, and the secretion of pro-inflammatory and anti-inflammatory cytokines decreased.

CONCLUSION

PU/fibrin (15:85) vascular scaffolds had great potential to be used as small-diameter tissue engineering blood vessels.

Considerations in the Development of Small-Diameter Vascular Graft as an Alternative for Bypass and Reconstructive Surgeries: A Review

BACKGROUND

Current design strategies for small diameter vascular grafts (< 6 mm internal diameter; ID) are focused on mimicking native vascular tissue because the commercially available grafts still fail at small diameters, notably due to development of intimal hyperplasia and thrombosis. To overcome these challenges, various design approaches, material selection, and surface modification strategies have been employed to improve the patency of small-diameter grafts.

REVIEW

The purpose of this review is to outline various considerations in the development of small-diameter vascular grafts, including material choice, surface modifications to enhance biocompatibility/endothelialization, and mechanical properties of the graft, that are currently being implanted. Additionally, we have taken into account the general vascular physiology, tissue engineering approaches, and collective achievements of the authors in this area. We reviewed both commercially available synthetic grafts (e-PTFE and PET), elastic polymers such as polyurethane and biodegradable and bioresorbable materials. We included naturally occurring materials by focusing on their potential application in the development of future vascular alternatives.

CONCLUSION

Until now, there are few comprehensive reviews regarding considerations in the design of small-diameter vascular grafts in the literature. Here-in, we have discussed in-depth the various strategies employed to generate engineered vascular graft due to their high demand for vascular surgeries. While some TEVG design strategies have shown greater potential in contrast to autologous or synthetic ePTFE conduits, many are still hindered by high production cost which prevents their widespread adoption. Nonetheless, as tissue engineers continue to develop on their strategies and procedures for improved TEVGs, soon, a reliable engineered graft will be available in the market. Hence, we anticipate a viable TEVG with resorbable property, fabricated via electrospinning approach to hold a greater potential that can overcome the challenges observed in both autologous and allogenic grafts. This is because they can be mechanically tuned, incorporated/surface-functionalized with bioactive molecules and mass-manufactured in a reproducible manner. It is also found that most of the success in engineered vascular graft approaching commercialization is for large vessels rather than small-diameter grafts used as cardiovascular bypass grafts. Consequently, the field of vascular engineering is still available for future innovators that can take up the challenge to create a functional arterial substitute.

Advancement of Nanobiomaterials to Deliver Natural Compounds for Tissue Engineering Applications

Recent advancement in nanotechnology has provided a wide range of benefits in the biological sciences, especially in the field of tissue engineering and wound healing. Nanotechnology provides an easy process for designing nanocarrier-based biomaterials for the purpose and specific needs of tissue engineering applications. Naturally available medicinal compounds have unique clinical benefits, which can be incorporated into nanobiomaterials and enhance their applications in tissue engineering. The choice of using natural compounds in tissue engineering improves treatment modalities and can deal with side effects associated with synthetic drugs. In this review article, we focus on advances in the use of nanobiomaterials to deliver naturally available medicinal compounds for tissue engineering application, including the types of biomaterials, the potential role of nanocarriers, and the various effects of naturally available medicinal compounds incorporated scaffolds in tissue engineering.

Collagen biomaterial for the treatment of myocardial infarction: an update on cardiac tissue engineering and myocardial regeneration

Myocardial infarction (MI) remains one of the leading cause of mortality over the world. However, current treatments are more palliative than curative, which only stall the progression of the disease, but not reverse the disease. While stem cells or bioactive molecules therapy is promising, the limited survival and engraftment of bioactive agent due to a hostile environment is a bottleneck for MI treatment. In order to maximize the utility of stem cells and bioactive molecules for myocardial repair and regeneration, various types of biomaterials have been developed. Among them, collagen-based biomaterial is widely utilized for cardiac tissue engineering and regeneration due to its optimal physical and chemical properties. In this review, we summarize the properties of collagen-based biomaterial. Then, we discuss collagen-based biomaterial currently being applied to treat MI alone, or together with stem cells and/or bioactive molecules. Finally, the delivery system of collagen-based biomaterial will also be discussed.

Fabricating mechanically improved silk-based vascular grafts by solution control of the gel-spinning process

There is a large unmet need for off-the-shelf biomaterial options to supplant venous autografts in bypass and reconstructive surgical procedures. Existing graft alternatives formed from non-degradable synthetic polymers are not capable of maintaining long-term patency and are thus not indicated for <6 mm inner diameter bypass procedures. To fill this void, degradable silk-based biomaterials have been proposed that can maintain their mechanical properties (i.e. compliance) while facilitating slow but progressive biomaterial remodeling and host integration mediated by cellular colonization. The goal of the present study was to enhance the porosity of gel-spun silk tubes, to facilitate faster degradation rates and improve cellularity, and thus improve host integration over time in vivo, while maintaining requisite mechanical functions. Silk solutions with a range of molecular weight distributions and, in turn, viscosities were used to generate tubes of varying porosities. A decrease in solution concentration correlated with an increase in mean pore size and overall porosity through a density-dependent mechanism. Tubes were mechanically analyzed, and these properties were the basis of an analytical model used to correlate tube formulations to structural compliance, which were shown to be similar to the saphenous vein. Tubes were also tested for suture retention to ensure surgical utility despite increased porosity. Tubes were implanted in the abdominal aorta of Sprague-Dawley rats via an end-to-end anastomosis model. Tubes with higher porosities showed early improvements in cell colonization that progressively increased over time; conversely, the dense architecture of less porous grafts (20MB) inhibited cell ingrowth and resulted in minimal biomaterial degradation at the 6-month time point. None of the highly porous tubes (5 MB and 10MB) remained patent at 6 months, likely due remodeling inducing bulk mechanical failure or a compromised blood-material interface.

Premature ovarian failure and tissue engineering

Premature ovarian failure (POF) usually happens former to the age of 40 and affects the female physiological state premenopausal period. In this condition, ovaries stop working long before the expected menopausal time. Of diagnostic symptoms of the disease, one can mention amenorrhea and hypoestrogenism. The cause of POF in most cases is idiopathic; however, cancer therapy may also cause POF. Commonly utilized therapies such as hormone therapy, in-vitro activation, and regenerative medicine are the most well-known treatments for POF. Hence, these therapies may be associated with some complications. The aim of the present study is to discuss the beneficial effects of tissue engineering for fertility rehabilitation in patients with POF as a newly emerging therapy.

Collagen-Based Tissue Engineering Strategies for Vascular Medicine

Cardiovascular diseases (CVDs) account for the 31% of total death per year, making them the first cause of death in the world. Atherosclerosis is at the root of the most life-threatening CVDs. Vascular bypass/replacement surgery is the primary therapy for patients with atherosclerosis. The use of polymeric grafts for this application is still burdened by high-rate failure, mostly caused by thrombosis and neointima hyperplasia at the implantation site. As a solution for these problems, the fast re-establishment of a functional endothelial cell (EC) layer has been proposed, representing a strategy of crucial importance to reduce these adverse outcomes. Implant modifications using molecules and growth factors with the aim of speeding up the re-endothelialization process has been proposed over the last years. Collagen, by virtue of several favorable properties, has been widely studied for its application in vascular graft enrichment, mainly as a coating for vascular graft luminal surface and as a drug delivery system for the release of pro-endothelialization factors. Collagen coatings provide receptor-ligand binding sites for ECs on the graft surface and, at the same time, act as biological sealants, effectively reducing graft porosity. The development of collagen-based drug delivery systems, in which small-molecule and protein-based drugs are immobilized within a collagen scaffold in order to control their release for biomedical applications, has been widely explored. These systems help in protecting the biological activity of the loaded molecules while slowing their diffusion from collagen scaffolds, providing optimal effects on the targeted vascular cells. Moreover, collagen-based vascular tissue engineering substitutes, despite not showing yet optimal mechanical properties for their use in the therapy, have shown a high potential as physiologically relevant models for the study of cardiovascular therapeutic drugs and diseases. In this review, the current state of the art about the use of collagen-based strategies, mainly as a coating material for the functionalization of vascular graft luminal surface, as a drug delivery system for the release of pro-endothelialization factors, and as physiologically relevant in vitro vascular models, and the future trend in this field of research will be presented and discussed.

In situ prevascularization designed by laser-assisted bioprinting: effect on bone regeneration

Vascularization plays a crucial role in bone formation and regeneration process. Development of a functional vasculature to improve survival and integration of tissue-engineered bone substitutes remains a major challenge. Biofabrication technologies, such as bioprinting, have been introduced as promising alternatives to overcome issues related to lack of prevascularization and poor organization of vascular networks within the bone substitutes. In this context, this study aimed at organizing endothelial cells in situ, in a mouse calvaria bone defect, to generate a prevascularization with a defined architecture, and promote in vivo bone regeneration. Laser-assisted bioprinting (LAB) was used to pattern Red Fluorescent Protein-labeled endothelial cells into a mouse calvaria bone defect of critical size, filled with collagen containing mesenchymal stem cells and vascular endothelial growth factor. LAB technology allowed safe and controlled in vivo printing of different cell patterns. In situ printing of endothelial cells gave rise to organized microvascular networks into bone defects. At two months, vascularization rate (vr) and bone regeneration rate (br) showed statistically significant differences between the 'random seeding' condition and both 'disc' pattern (vr = +203.6%; br = +294.1%) and 'crossed circle' pattern (vr = +355%; br = +602.1%). These results indicate that in vivo LAB is a valuable tool to introduce in situ prevascularization with a defined configuration and promote bone regeneration.

A collagen scaffold loaded with human umbilical cord-derived mesenchymal stem cells facilitates endometrial regeneration and restores fertility

In women of reproductive age, severe injuries to the endometrium are often accompanied by endometrial scar formation or intrauterine adhesions (IUAs), which can result in infertility or miscarriage. Although many approaches have been used to treat severe IUAs, high recurrence rates and endometrial thinning have limited therapeutic efficiency. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrial regeneration. The CS/UC-MSCs promoted human endometrial stromal cell proliferation and inhibited apoptosis in vitro through paracrine effects. In a model of endometrial damage, transplantation with the CS/UC-MSCs maintained normal luminal structure, promoted endometrial regeneration and collagen remodeling, induced intrinsic endometrial cell proliferation and epithelium recovery, and enhanced the expression of estrogen receptor α and progesterone receptor. An improved ability of the regenerated endometrium to receive embryos was confirmed. Together, our results indicate that the CS/UC-MSCs promoted endometrial structural reconstruction and functional recovery. Topical administration of the CS/UC-MSCs after trans-cervical resection of adhesions might prevent re-adhesion, promote endometrium regeneration and improve pregnancy outcomes for patients with severe IUAs. STATEMENT OF SIGNIFICANCE: Intrauterine adhesions due to severe endometrium injuries happen frequently in clinic and become one of the crucial reasons for women's infertility or miscarriage. Therefore, how to regenerate the damaged endometrium is a big challenge. In this study, a collagen scaffold (CS) loaded with human umbilical cord-derived mesenchymal stem cells (UC-MSCs) was fabricated and applied for endometrium regeneration. Herein, UC-MSCs, known for low immunogenicity and high proliferative potential, exhibit promising potential for endometrium regeneration; and collagen scaffolds provide suitable physical support. It was proved that transplantation with CS/UC-MSCs promoted endometrial regeneration and fertility restoration. It suggested that topical administration of CS/UC-MSCs in uterus could be a promising strategy for patients suffering severe intrauterine adhesion and infertility.

Injectable Scaffolds Enriched with Silver to Inhibit Bacterial Invasion in Tissue Regeneration

During wound healing, bacterial infections may prolong skin regeneration and tissue repair, causing delayed or incomplete healing. The therapeutic strategies currently used include general therapeutic modes, growth factors, skin substitutes, matrices and/or cell therapy. Among recent technologies, wound dressing materials comprising silver nitrate or silver sulfadiazine as the antimicrobial agent are widespread, despite their known cytotoxicity. The aim of this work was to develop and evaluate the efficacy of gelatinous injectable biomaterials composed of collagen and alginates, enriched with silver against bacterial pathogens commonly involved in wound infections. To reduce cytotoxicity, silver was used as lactate and saccharinated salts. Results show that silver-enriched beads were effective against both Gram-positive and Gram-negative strains in a concentration-dependent manner. Silver addition was more active against Staphylococcusepidermidis than against Pseudomonasaeruginosa. The antibacterial activity was localized only in the area of contact with the beads at concentrations lower than 0.3 mM, whereas at higher concentrations a larger inhibition halo was observed. No cytotoxic effect on eukaryotic cells was seen both testing the materials’ extracts or the Ag-doped beads in contact tests. These results, although preliminary, suggest that these scaffolds are a promising approach for realizing injectable or spreadable functional biomaterials with antibacterial activity for applications in wound management.

Leukemia inhibitory factor promotes the regeneration of rat uterine horns with full-thickness injury

Severe uterine injuries may lead to infertility or pregnancy complications. There is a lack of effective methods to restore the structure and function of seriously injured uteri. Leukemia inhibitory factor (LIF), which plays a crucial role in blastocyst implantation, promotes the process of regeneration after injury in several different tissues. In this study, we explored the effect of LIF on the regeneration of rat uterine horns following full-thickness injury. One hundred and twenty four female Sprague-Dawley rats were assigned to three groups, including a sham-operated group (n = 34 uterine horns), a PBS/collagen group (n = 90 uterine horns), and a LIF/collagen group (n = 124 uterine horns). The regenerated uterine horns were collected at 1, 2, 4, 8, or 12 weeks after the surgery. The results showed that LIF/collagen scaffolds increased the number of endometrial cells and neovascularization 2 weeks after uterine full-thickness defect in excision sites (p < 0.001 vs PBS/collagen). Eight weeks after the surgery, the number of endometrial glands was dramatically higher in the LIF/collagen scaffolds group (35.2 ± 4.1/field) than in the PBS/collagen scaffolds (15.1 ± 1.4/field). The percentage of a-smooth muscle actin (a-SMA)-positive areas in the LIF/collagen scaffolds (88.8% ± 9.8%) was also significantly higher than that in the PBS/collagen group (52.9% ± 3.7%). Moreover, LIF improved the pregnancy rate and fetus number. We also found that LIF inhibited the infiltration of inflammatory cells and down-regulated the pro-inflammatory cytokine IL-12 expression while up-regulating the anti-inflammatory cytokine IL-10 expression in the injured part of the uterine horns. Our results indicate that LIF promotes regeneration of the uterus after injury, and this is at least partially due to its immunomodulatory properties. In addition, it is worth to explore further the possibility for LIF/collagen to be an alternative therapeutic approach for uterine damage in the clinic in near future.

Hemostatic wound dressings: Predicting their effects by in vitro tests

BACKGROUND

Application of controlled in vitro techniques can be used as a screening tool for the development of new hemostatic agents allowing quantitative assessment of overall hemostatic potential.

MATERIALS AND METHODS

Several tests were selected to evaluate the efficacy of cotton gauze, collagen, and oxidized regenerated cellulose for enhancing blood clotting, coagulation, and platelet activation.

RESULTS

Visual inspection of dressings after blood contact proved the formation of blood clots. Scanning electron microscopy demonstrated the adsorption of blood cells and plasma proteins. Significantly enhanced blood clot formation was observed for collagen together with β-thromboglobulin increase and platelet count reduction. Oxidized regenerated cellulose demonstrated slower clotting rates not yielding any thrombin generation; yet, led to significantly increased thrombin-anti-thrombin-III complex levels compared to the other dressings. As hemostyptica ought to function without triggering any adverse events, induction of hemolysis, instigation of inflammatory reactions, and initiation of the innate complement system were also tested. Here, cotton gauze provoked high PMN elastase and elevated SC5b-9 concentrations.

CONCLUSIONS

A range of tests for desired and undesired effects of materials need to be combined to gain some degree of predictability of the in vivo situation. Collagen-based dressings demonstrated the highest hemostyptic properties with lowest adverse reactions whereas gauze did not induce high coagulation activation but rather activated leukocytes and complement.

Fabrication of Stand-Alone Cell-Laden Collagen Vascular Network Scaffolds Using Fugitive Pattern-Based Printing-Then-Casting Approach

Vascular networks are of great significance in tissue engineering and viewed as the first step to fabricate human tissues. Although various techniques have been investigated to create vascular and vascular-like networks, the fabrication of stand-alone pure collagen-based vascular constructs is still a challenge because of the poor extrudability, weak mechanical property, and long cross-linking time of pure collagen solutions. In this study, a fugitive pattern-based printing-then-casting approach is investigated. The proposed alginate-based fugitive ink has excellent mechanical strength (by adding Laponite nanoclay), printability (by adding Laponite nanoclay), and controllable gelation rate (by adding disodium hydrogen phosphate). Using this fugitive ink, complex vascular-like structures can be easily printed and cross-linked in Laponite EP bath as fugitive vascular tree patterns. Each fugitive vascular tree pattern is then embedded in a gelatin bath to make a gelatin mold with the tree patterns. With the help of sodium citrate, the fugitive vascular tree pattern is liquefied and removed to create the gelatin mold with vascular channels. Finally, a stand-alone collagen vascular network scaffold embedded with fibroblasts can be fabricated by casting the cell-laden collagen suspension into the gelatin mold and releasing it from the mold at 37 °C. The cell-related investigations indicate that the cells grow and spread well in the pure collagen vascular network scaffold. The proposed hybrid printing-then-casting approach also provides a feasible technology to fabricate with materials having low viscosity, long gelation time, and poor mechanical property.

Collagen/Gelatin/Hydroxyethyl Cellulose Composites Containing Microspheres Based on Collagen and Gelatin: Design and Evaluation

The objective of this study was to develop three-dimensional collagen/gelatin/hydroxyethyl cellulose composites in combination with gelatin or collagen-gelatin loaded microspheres. Microspheres were prepared by an emulsification/crosslinking method. A 1-Ethyl-3-(3-dimethyl-aminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS) mixture were used as a crosslinking agent for the obtained materials. The structure of the materials was studied using scanning electron microscopy (SEM) and infrared spectroscopy. Moreover, a Calendula officinalis (pot marigold) flower extract release profile of the microsphere-loaded matrices was assessed in vitro. Additionally, porosity, density, stability, swelling and mechanical properties were tested. On the basis of SEM images, the microspheres exhibited a spherical shape and were irregularly dispersed in the polymer matrix. However, it was found that the addition of microparticles to obtained materials did not significantly change their microstructure. We observed a slight decrease in the swelling properties of matrices and an increase in values of Young's modulus. Significantly, the addition of microspheres to the polymer matrices led to improved loading capacity of materials and release performance of Calendula officinalis flower extract. This makes the collagen/gelatin/hydroxyethyl cellulose composites containing microspheres a promising and suitable vehicle for biomedical, dermatological, or cosmetic applications.

A biomaterials approach to influence stem cell fate in injectable cell-based therapies

Background

Numerous stem cell therapies use injection-based administration to deliver high-density cell preparations. However, cell retention rates as low as 1% have been observed within days of transplantation. This study investigated the effects of varying administration and formulation parameters of injection-based administration on cell dose recovery and differentiation fate choice of human mesenchymal stem cells.

Methods

The impact of ejection rate via clinically relevant Hamilton micro-syringes and biomaterial-assisted delivery was investigated. Cell viability, the percentage of cell dose delivered as viable cells, proliferation capacity as well as differentiation behaviour in bipotential media were assessed. Characterisation of the biomaterial-based cell carriers was also carried out.

Results

A significant improvement of in-vitro dose recovery in cells co-ejected with natural biomaterials was observed, with ejections within 2% (w/v) gelatin resulting in 87.5 ± 14% of the cell dose being delivered as viable cells, compared to 32.2 ± 19% of the dose ejected in the commonly used saline vehicle at 10 μl/min. Improvement in cell recovery was not associated with the rheological properties of biomaterials utilised, as suggested by previous studies. The extent of osteogenic differentiation was shown to be substantially altered by choice of ejection rate and cell carrier, despite limited contact time with cells during ejection. Collagen type I and bone-derived extracellular matrix cell carriers yielded significant increases in mineralised matrix deposited at day 21 relative to PBS.

Conclusions

An enhanced understanding of how administration protocols and biomaterials influence cell recovery, differentiation capacity and choice of fate will facilitate the development of improved administration and formulation approaches to achieve higher efficacy in stem cell transplantation.

Electronic supplementary material

The online version of this article (10.1186/s13287-018-0789-1) contains supplementary material, which is available to authorized users.

Improved Left Ventricular Aneurysm Repair with Cell- and Cytokine-Seeded Collagen Patches

Background

Engineered heart tissues (EHTs) present a promising alternative to current materials for surgical ventricular restoration (SVR); however, the clinical application remains limited by inadequate vascularization postimplantation. Moreover, a suitable and economic animal model for primary screening is another important issue.

Methods

Recently, we used 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride chemistry (EDC) to initiate a strengthened, cytokine-conjugated collagenous platform with a controlled degradation speed. In vitro, the biomaterial exhibited an enhanced mechanical strength maintaining a porous ultrastructure, and the constant release of cytokines promoted the proliferation of seeded human mesenchymal stem cells (hMSCs). In vivo, with the hMSC-seeded, cytokine-immobilized patch (MSCs + GF patch), we performed modified SVR for rats with left ventricular aneurysm postmyocardial infarction (MI). Overall, the rats that underwent modified SVR lost less blood and had lower mortality. After 4 weeks, the rats repaired with this cell-seeded, cytokine-immobilized patch presented preserved cardiac function, beneficial morphology, enhanced cell infiltration, and functional vessel formation compared with the cytokine-free (MSC patch), cell-free (GF patch), or blank controls (EDC patch). Furthermore, the degradable period of the collagen patch in vivo extended up to 3 months after EDC treatment.

Conclusions

EDC may substantially modify collagen scaffold and provide a promising and practical biomaterial for SVR.

Displacement Propagation in Fibrous Networks Due to Local Contraction

The extracellular matrix provides macroscale structure to tissues and microscale guidance for cell contraction, adhesion, and migration. The matrix is composed of a network of fibers, which each deform by stretching, bending, and buckling. Whereas the mechanics has been well characterized in uniform shear and extension, the response to more general loading conditions remains less clear, because the associated displacement fields cannot be predicted a priori. Studies simulating contraction, such as due to a cell, have observed displacements that propagate over a long range, suggesting mechanisms such as reorientation of fibers toward directions of tensile force and nonlinearity due to buckling of fibers under compression. It remains unclear which of these two mechanisms produces the long-range displacements and how properties like fiber bending stiffness and fiber length affect the displacement field. Here, we simulate contraction of an inclusion within a fibrous network and fit the resulting radial displacements to ur ∼ r−n where the power n quantifies the decay of displacements over distance, and a value of n less than that predicted by classical linear elasticity indicates displacements that propagate over a long range. We observed displacements to propagate over a longer range for greater contraction of the inclusion, for networks having longer fibers, and for networks with lower fiber bending stiffness. Contraction of the inclusion also caused fibers to reorient into the radial direction, but, surprisingly, the reorientation was minimally affected by bending stiffness. We conclude that both reorientation and nonlinearity are responsible for the long-range displacements.

Umbilical cord-derived mesenchymal stem cells on scaffolds facilitate collagen degradation via upregulation of MMP-9 in rat uterine scars

BACKGROUND

Severe injuries of the uterus may trigger uterine scar formation, ultimately leading to infertility or obstetrical complications. To date, few methods have adequately solved the problem of collagen deposition in uterine scars. Umbilical cord-derived mesenchymal stem cells (UC-MSCs) have shown great promise in clinical applications. The objective of this study was to investigate the effect of a scaffold/UC-MSCs construct on collagen degradation and functional regeneration in rat uterine scars following full-thickness excision of uterine walls.

METHODS

In order to establish a rat model of uterine scars, the uterine wall of approximately 1.0 cm in length and 0.5 cm in width (one-third of the uterine circumference) was excised from each uterine horn. A total of 128 scarred uterine horns from 64 rats were randomly assigned to four groups, including a PBS group (n = 32 uterine horns), scaffold group (n = 32 uterine horns), UC-MSCs group (n = 32 uterine horns) and scaffold/UC-MSCs group (n = 32 uterine horns) to investigate the effect of different treatments on the structure and function of uterine scars. PBS, degradable collagen fibres, UC-MSCs or UC-MSCs mixed with gelatinous degradable collagen fibres were injected into four pre-marked points surrounding each uterine scar, respectively. At days 30 and 60 post-transplantation, a subset of rats (n = 8 uterine horns) from each group was euthanized and serial sections of uterine tissues containing the operative region were prepared. Haematoxylin-eosin staining, Masson's trichrome staining, and immunohistochemical staining for MMP-2, MMP-9, α-SMA and vWF were performed. Finally, another subset of rats (n = 16 uterine horns) from each group was mated with male rats at day 60 post-transplantation and euthanized 18 days after the presence of vaginal plugs to check numbers, sizes and weights of fetuses, as well as sites of implantation.

RESULTS

The scaffold/UC-MSCs group exhibited obvious collagen degradation compared with the other three groups. At day 60 post-transplantation, the number of MMP-9-positive cells in the scaffold/UC-MSCs group (25.96 ± 3.63) was significantly higher than that in the PBS group (8.19 ± 1.61, P < 0.01), the scaffold group (7.25 ± 2.17, P < 0.01) and the UC-MSCs group (8.31 ± 2.77, P < 0.01). The pregnancy rate in the scaffold/UC-MSCs group (10/16) was also significantly higher than that in the PBS group (2/16, P < 0.017), the scaffold group (1/16, P < 0.017) and the UC-MSCs group (3/16, P < 0.017).

CONCLUSIONS

The scaffold/UC-MSCs system facilitated collagen degradation in uterine scars via upregulation of MMP-9, which was secreted by transplanted UC-MSCs, and promoted regeneration of the endometrium, myometrium and blood vessels in uterine scars. Furthermore, the scaffold/UC-MSCs-treated uterine scars showed nearly complete restoration of receptive fertility.

Cellularizing hydrogel-based scaffolds to repair bone tissue: How to create a physiologically relevant micro-environment?

Tissue engineering is a promising alternative to autografts or allografts for the regeneration of large bone defects. Cell-free biomaterials with different degrees of sophistication can be used for several therapeutic indications, to stimulate bone repair by the host tissue. However, when osteoprogenitors are not available in the damaged tissue, exogenous cells with an osteoblast differentiation potential must be provided. These cells should have the capacity to colonize the defect and to participate in the building of new bone tissue. To achieve this goal, cells must survive, remain in the defect site, eventually proliferate, and differentiate into mature osteoblasts. A critical issue for these engrafted cells is to be fed by oxygen and nutrients: the transient absence of a vascular network upon implantation is a major challenge for cells to survive in the site of implantation, and different strategies can be followed to promote cell survival under poor oxygen and nutrient supply and to promote rapid vascularization of the defect area. These strategies involve the use of scaffolds designed to create the appropriate micro-environment for cells to survive, proliferate, and differentiate in vitro and in vivo. Hydrogels are an eclectic class of materials that can be easily cellularized and provide effective, minimally invasive approaches to fill bone defects and favor bone tissue regeneration. Furthermore, by playing on their composition and processing, it is possible to obtain biocompatible systems with adequate chemical, biological, and mechanical properties. However, only a good combination of scaffold and cells, possibly with the aid of incorporated growth factors, can lead to successful results in bone regeneration. This review presents the strategies used to design cellularized hydrogel-based systems for bone regeneration, identifying the key parameters of the many different micro-environments created within hydrogels.

Pilot Mouse Study of 1 mm Inner Diameter (ID) Vascular Graft Using Electrospun Poly(ester urea) Nanofibers

An off-the-shelf, small diameter tissue engineered vascular graft (TEVG) would be transformative to surgeons in multiple subspecialties. Herein, the results of a small diameter (ID ≈ 1 mm) vascular graft constructed from resorbable, amino acid-based poly(ester urea) (PEU) are reported. Electrospun PEU grafts of two different wall thicknesses (type A: 250 μm; type B: 350 μm) are implanted as abdominal infra-renal aortic grafts in a severe combined immune deficient/beige mouse model and evaluated for vessel remodeling over one year. Significantly, the small diameter TEVG does not rupture or lead to acute thrombogenic events during the intervals tested. The pilot TEVG in vivo shows long-term patency and extensive tissue remodeling with type A grafts. Extensive tissue remodeling in type A grafts leads to the development of well-circumscribed neovessels with an endothelial inner lining, a neointima containing smooth muscle cells. However, due to slow degradation of the PEU scaffold materials in vivo, the grafts remain after one year. The type B grafts, which have 350 μm thick walls, experience occlusion over the one year interval due to intimal hyperplasia. This study affords significant findings that will guide the design of future generations of small diameter vascular grafts.

Use of nonhuman primates for the development of bioengineered female reproductive organs

Nonhuman primates (NHPs) have been widely used in reproductive biology, neuroscience, and drug development since a number of primate species are phylogenetically close to humans. In this review, we summarize the use of NHPs for nonclinical application in the reproductive system disorders including the loss or failure of an organ or tissue. Causes of infertility include congenital aplasia and acquired disorders of the reproductive organs. In addition, anti-cancer treatments can deplete ovarian follicles, leading to premature ovarian failure, infertility and long-term health risks. Along with a limited supply of human reproductive organs, anatomic/physiologic similarities to humans support the need for NHP models (New-World monkeys such as the common marmoset and Old-World monkeys such as cynomolgus and rhesus monkeys) to promote the advances in female infertility studies. For maintaining and executing animal studies using NHP, special protocols including animal care, anesthetic protocol, surgical technique, and immunosuppressive protocol are necessary. With a growing interest in the potential therapies such as endometrial tissue engineering, and ovary/follicle cryopreservation and grafting in Korea, this review can be useful in selecting appropriate animal models and can bridge between nonclinical studies and clinical applications by providing detailed information on the use of NHPs in the field of reproductive organ disorders.

In vitro hemocompatibility and cytocompatibility of a three-layered vascular scaffold fabricated by sequential electrospinning of PCL, collagen, and PLLA nanofibers

Aiming to mimic a blood vessel structurally, morphologically, and mechanically, a sequential electrospinning technique using a small diameter mandrel collector was performed and a three-layered tubular scaffold composed of nanofibers of polycaprolactone, collagen, and poly(l-lactic acid) as inner, intermediate, and outer layers, respectively, was developed. Biological performances of the scaffold in terms of compatibility with blood and endothelial cells were assessed to get some insights into its potential use as a tissue engineered small-diameter vascular replacement compared to an expanded polytetrafluoroethylene vascular graft. Due to direct contact of the blood and endothelial cells with inner surface of the scaffold, polycaprolactone fibers were characterized using SEM, water contact angle measurement, and ATR-FTIR. Despite similar surface wettability of the electrospun scaffold and the expanded polytetrafluoroethylene graft, the three-layered scaffold significantly reduced platelet adhesion and hemolysis ratio compared to expanded polytetrafluoroethylene graft while comparable blood clotting profiles were observed for both electrospun scaffold and expanded polytetrafluoroethylene graft. However, inflammatory response to nanofibrous surface of the scaffold was reduced compared to expanded polytetrafluoroethylene graft. The electrospun scaffold also presented a significantly more supportive substrate for endothelialization than the expanded polytetrafluoroethylene graft. The results described herein suggested that the three-layered scaffold has superior biological properties compared to an expanded polytetrafluoroethylene graft for vascular tissue engineering.

Co‑delivery and controlled release of stromal cell‑derived factor‑1α chemically conjugated on collagen scaffolds enhances bone morphogenetic protein‑2‑driven osteogenesis in rats

There has been considerable focus in investigations on the delivery systems and clinical applications of bone morphogenetic protein-2 (BMP-2) for novel bone formation. However, current delivery systems require high levels of BMP-2 to exert a biological function. There are several concerns in using of high levels of BMP-2, including safety and the high cost of treatment. Therefore, the development of strategies to decrease the levels of BMP-2 required in these delivery systems is required. In our previous studies, a controlled-release system was developed, which used Traut's reagent and the cross-linker, 4-(N-maleimi-domethyl) cyclohexane-1-carboxylic acid 3-sulfo-N-hydroxysuccinimide ester sodium salt (Sulfo-SMCC), to chemically conjugate BMP-2 directly on collagen discs. In the current study, retention efficiency and release kinetics of stromal cell-derived factor-1α (SDF-1α) cross-linked on collagen scaffolds were detected. In addition, the osteogenic activity of SDF-1α and suboptimal doses of BMP-2 cross-linked on collagen discs following subcutaneous implantation in rats were evaluated. Independent two-tailed t-tests and one-way analysis of variance were used for analysis. In the present study, the controlled release of SDF-1α chemically conjugated on collagen scaffolds was demonstrated. By optimizing the concentrations of Traut's reagent and the Sulfo-SMCC cross-linker, a significantly higher level of SDF-1α was covalently retained on the collagen scaffold, compared with that retained using a physical adsorption method. Mesenchymal stem cell homing indicated that the biological function of the SDF-1α cross-linked on the collagen scaffolds remained intact. In rats, co-treatment with SDF-1α and a suboptimal dose of BMP-2 cross-linked on collagen scaffolds using this chemically conjugated method induced higher levels of ectopic bone formation, compared with the physical adsorption method. No ectopic bone formation was observed following treatment with a suboptimal dose of BMP-2 alone. Therefore, the co-delivery of SDF-1α and a suboptimal dose of BMP-2 chemically conjugated on collagen scaffolds for the treatment of bone injuries reduced the level of BMP-2 required, reducing the risks of side effects.

Secreted Endothelial Cell Factors Immobilized on Collagen Scaffolds Enhance the Recipient Endothelial Cell Environment

Strategies to design novel vascular scaffolds are a continuing aim in tissue engineering and often such designs encompass the use of recombinant factors to enhance the performance of the scaffold. The established use of cell secretion utilized in feeder systems and conditioned media offer a source of paracrine factors, which has potential to be used in tissue-engineered (TE) scaffolds. Here we utilize this principle from endothelial cells (ECs), to create a novel TE scaffold by harnessing secreted factors and immobilizing these to collagen scaffolds. This research revealed increased cellular attachment and positive angiogenic gene upregulation responses in recipient ECs grown on these conditioned scaffolds. Also, the conditioning method did not affect the mechanical structural integrity of the scaffolds. These results may advocate the potential use of this system to improve vascular scaffolds' in vivo performance. In addition, this process may be a future method utilized to improve other tissue engineering scaffold therapies.

Unraveling the role of mechanical stimulation on smooth muscle cells: A comparative study between 2D and 3D models

A thorough understanding of cell response to combined culture configuration and mechanical cues is of paramount importance in vascular tissue engineering applications. Herein, we investigated and compared the response of vascular smooth muscle cells (vSMCs) cultured in different culture environments (2D cell monolayers and 3D cellularized collagen-based gels) in combination with mechanical stimulation (7% uniaxial cyclic strain, 1 Hz) for 2 and 5 days. When cyclic strain was applied, two different responses, in terms of cell orientation and expression of contractile-phenotype proteins, were observed in 2D and 3D models. Specifically, in 2D configuration, cyclic strain caused ∼50% of cell population to align nearly perpendicular (80-90 degrees) to the strain direction, while not influencing the contractile-phenotype protein expression, as compared to the 2D static controls. Conversely, the application of uniaxial strain to 3D constructs induced a ∼60% cell alignment almost parallel (0-10 degrees) to the strain direction. Moreover, 3D mechanical stimulation applied for 5 days induced a twofold increase of SM α-actin level and a 14-fold increase of calponin expression as compared to 3D static controls. Altogether these findings provide a new insight into the potential to drive cell behavior by modulating the extracellular matrix and the biomechanical environment. Biotechnol. Bioeng. 2016;113: 2254-2263. © 2016 Wiley Periodicals, Inc.

Transplantation of adipose-derived stem cells combined with collagen scaffolds restores ovarian function in a rat model of premature ovarian insufficiency

STUDY QUESTION

Does the transplantation of adipose-derived stem cells (ADSCs) on soluble collagen scaffolds (collagen/ADSCs) have better therapeutic effect than transplantation of ADSCs alone, to treat premature ovarian insufficiency (POI) in a rat model induced by Tripterygium Glycosides (TG)?

SUMMARY ANSWER

The transplantation of collagen/ADSCs increased the short-term retention of ADSCs in ovaries and contributed to long-term restoration of ovarian function, as well as the fertility of rats with TG-induced ovarian damage.

WHAT IS KNOWN ALREADY

About 50% of young women in China, who have been treated with TG, have subsequently developed ovarian insufficiency. Rats exhibit similar symptoms to these patients when given an equivalent dose of TG. Transplantation of ADSCs improves ovarian function impaired by chemotherapy in rodent models.

STUDY DESIGN, SIZE, DURATION

After the administration of TG, 54 POI model rats were randomly assigned to 4 groups: phosphate buffered saline (PBS) ( ITALIC! n = 14), collagen ( ITALIC! n = 11), ADSCs ( ITALIC! n = 16) and collagen/ADSCs ( ITALIC! n = 13). Seventeen normal rats were assigned as control group. The retention of ADSCs in ovaries was confirmed immediately or at 3, 7, 14 and 28 days after transplantation ( ITALIC! n = 9). Four weeks after transplantation, ovarian function was evaluated from estrous cycle, estradiol level, the follicle number, granulosa cell proliferation and a fertility test.

PARTICIPANTS/MATERIALS, SETTING, METHODS

To establish the POI model, rats were administered 60 mg TG/kg/day intragastrically for 50 days. The estrous cycles were assessed by vaginal smear. The concentration of plasma estradiol in diestrus stage was measured using a radioimmunoassay kit. Disordered estrous cycles and low serum estradiol levels indicated the successful establishment of the POI model. Four types of suspensions (PBS, collagen, ADSCs and collagen/ADSCs) were transplanted directly into the core of the ovaries. The short-term retention of ADSCs in ovaries was evaluated by small-animal positron emission tomography images immediately after transplantation of (18)F-Fluorodeoxyglucose ((18)F-FDG) labeled ADSCs. The long-term retention of ADSCs in ovaries was observed by immunohistochemistry after transplantation of green fluorescent protein (GFP)-labeled ADSCs. Serial sections of ovaries were prepared for histological analysis, follicle counting, and immunohistochemistry for Ki67 and Cleaved-Caspase-3. For the assessment of fertility, rats were mated with proven fertile male rats for 10 days.

MAIN RESULTS AND THE ROLE OF CHANCE

The (18)F-FDG signal decreased more slowly in ovaries injected with collagen/ADSCs than in ovaries with injected with ADSCs alone. Significantly more GFP-positive cells were observed in ovaries injected with collagen/GFP-ADSCs than in ovaries injected with GFP-ADSCs alone up to 14 days after the injection. However, in both groups very few GFP-positive cells were present at 4 weeks after transplantation. The collagen/ADSCs and ADSCs groups both showed better estrous cycle recovery than the PBS and collagen groups. The estradiol (E2) level in the collagen/ADSCs group was significantly increased compared with that of the PBS group ( ITALIC! P < 0.05). The number of antral follicles in the collagen/ADSCs group and the ADSCs group significantly increased compared with the PBS group ( ITALIC! P < 0.05). The granulosa cell proliferation in the collagen/ADSCs group was better than in the PBS group ( ITALIC! P < 0.01). The mating rates of the collagen/ADSCs group (88.9%) and the ADSCs group (90.9%) were higher than that of PBS group (60%, ITALIC! P < 0.05). The pregnancy rates of the collagen/ADSCs group (77.8%) and the ADSCs group (72.7%) were higher than the PBS group (50%, ITALIC! P < 0.05).

LIMITATIONS, REASONS FOR CAUTION

We chose ADSCs for their accessibility, convenience and safety. We did not use other cells or materials for POI treatments to show that the collagen/ADSCs are the most promising materials.

WIDER IMPLICATIONS OF THE FINDINGS

Soluble collagen scaffolds may be useful in stem cells transplantation therapy for POI.

STUDY FUNDING/COMPETING INTERESTS

This work is supported by grants from the 'Strategic Priority Research Program' of the Chinese Academy of Sciences (XDA01030000); Maternal-Fetal Medicine from Jiangsu Province Health Department of China (XK2011027); Clinical Center of Obstetric, Gynecologic and Genetic Diseases, Nanjing Health Department of Jiangsu Province, China; Fundamental Research Funds for the Central Universities (20620140652). The authors declare no competing financial interests.

TRIAL REGISTRATION NUMBER

Not applicable.

Biomimetic interconnected porous keratin-fibrin-gelatin 3D sponge for tissue engineering application

The medicated wound dressing material with highly interconnected pores, mimicking the function of the extracellular matrix was fabricated for the promotion of cell growth. In this study, keratin (K), fibrin (F) and gelatin (G) composite scaffold (KFG-SPG) was fabricated by freeze drying technique and the mupirocin (D) drug was successfully incorporated with KFG-SPG (KFG-SPG-D) intended for tissue engineering applications. The fabrication of scaffold was performed without the use of any strong chemical solvents, and the solid sponge scaffold was obtained with well interconnected pores. The porous morphology of the scaffold was confirmed by SEM analysis and exhibited competent mechanical properties. KFG-SPG and KFG-SPG-D possess high level of biocompatibility, cell proliferation and cell adhesion of NIH 3T3 fibroblast and human keratinocytes (HaCaT) cell lines thereby indicating the scaffolds potential as a suitable medicated dressing for wound healing.