Quantitative kinetic analysis of gene expression during human osteoblastic adhesion on orthopaedic materials

A model approach to show that monocytes can enter microporous β-TCP ceramics

β-TCP ceramics are versatile bone substitute materials and show many interactions with cells of the monocyte-macrophage-lineage. The possibility of monocytes entering microporous β-TCP ceramics has however not yet been researched. In this study, we used a model approach to investigate whether monocytes might enter β-TCP, providing a possible explanation for the origin of CD68-positive osteoclast-like giant cells found in earlier works.We used flow chambers to unidirectionally load BC, PRP, or PPP into slice models of either 2 mm or 6 mm β-TCP. Immunofluorescence for CD68 and live/dead staining was performed after the loading process.Our results show that monocytes were present in a relevant number of PRP and BC slices representing the inside of our 2 mm slice model and also present on the actual inside of our 6 mm model. For PPP, monocytes were not found beyond the surface in either model.Our results indicate the possibility of a new and so far neglected constituent in β-TCP degradation, perhaps causing the process of ceramic degradation also starting from inside the ceramics as opposed to the current understanding. We also demonstrated flow chambers as a possible new in vitro model for interactions between blood and β-TCP.

Considering the Value of 3D Cultures for Enhancing the Understanding of Adhesion, Proliferation, and Osteogenesis on Titanium Dental Implants

BACKGROUND

Individuals with pathologic conditions and restorative deficiencies might benefit from a combinatorial approach encompassing stem cells and dental implants; however, due to the various surface textures and coatings, the influence of titanium dental implants on cells exhibits extensive, wide variations. Three-dimensional (3D) cultures of stem cells on whole dental implants are superior in testing implant properties and were used to examine their capabilities thoroughly.

MATERIALS AND METHODS

The surface micro-topography of five titanium dental implants manufactured by sandblasting with titanium, aluminum, corundum, or laser sintered and laser machined was compared in this study. After characterization, including particle size distribution and roughness, the adhesion, proliferation, and viability of adipose-derived stem cells (ADSCs) cultured on the whole-body implants were tested at three time points (one to seven days). Finally, the capacity of the implant to induce ADSCs' spontaneous osteoblastic differentiation was examined at the same time points, assessing the gene expression of collagen type 1 (coll-I), osteonectin (osn), alkaline phosphatase (alp), and osteocalcin (osc).

RESULTS

Laser-treated (Laser Mach and Laser Sint) implants exhibited the highest adhesion degree; however, limited proliferation was observed, except for Laser Sint implants, while viability differences were seen throughout the three time points, except for Ti Blast implants. Sandblasted surfaces (Al Blast, Cor Blast, and Ti Blast) outpaced the laser-treated ones, inducing higher amounts of coll-I, osn, and alp, but not osc. Among the sandblasted surfaces, Ti Blast showed moderate roughness and the highest superficial texture density, favoring the most significant spontaneous differentiation relative to all the other implant surfaces.

CONCLUSIONS

The results indicate that 3D cultures of stem cells on whole-body titanium dental implants is a practical and physiologically appropriate way to test the biological characteristics of the implants, revealing peculiar differences in ADSCs' adhesion, proliferation, and activity toward osteogenic commitment in the absence of specific osteoinductive cues. In addition, the 3D method would allow researchers to test various implant surfaces more thoroughly. Integrating with preconditioned stem cells would inspire a more substantial combinatorial approach to promote a quicker recovery for patients with restorative impairments.

Eggshell Microparticle Reinforced Scaffolds for Regeneration of Critical Sized Cranial Defects

Scaffold-based approaches for bone regeneration have been studied using a wide range of biomaterials as reinforcing agents to improve the mechanical strength and bioactivity of the 3D constructs. Eggshells are sustainable and inexpensive materials with unique biological and chemical properties to support bone differentiation. The incorporation of eggshell particles within hydrogels yields highly osteoinductive and osteoconductive scaffolds. This study reveals the effects of microparticles of whole eggshells, eggshells without a membrane, and a pristine eggshell membrane on osteogenic differentiation in protein-derived hydrogels. The in vitro studies showed that gels reinforced with eggshells with and without a membrane demonstrated comparable cellular proliferation, osteogenic gene expression, and osteogenic differentiation. Subsequently, in vivo studies were performed to implant eggshell microparticle-reinforced composite hydrogel scaffolds into critical-sized cranial defects in Sprague Dawley (SD) rats for up to 12 weeks to study bone regeneration. The in vivo results showed that the eggshell microparticle-based scaffolds supported an average bone volume of 60 mm³ and a bone density of 2000 HU 12 weeks post implantation. Furthermore, histological analyses of the explanted scaffolds showed that the eggshell microparticle-reinforced scaffolds permitted tissue infiltration and induced bone tissue formation over 12 weeks. The histology staining also indicated that these scaffolds induced significantly higher bone regeneration at 6 and 12 weeks as compared to the blank (no scaffold) and pristine gel scaffolds. The eggshell microparticle-reinforced scaffolds also supported significantly higher bone formation, remodeling, and vascularization over 6 and 12 weeks as confirmed by immunohistochemistry analysis. Collectively, our results indicated that eggshell microparticle-reinforced scaffolds facilitated significant bone regeneration in critical-sized cranial defects.

Active sites of human MEPE-ASARM regulating bone matrix mineralization

The proteolytic fragment ASARM (acidic serine- and aspartate-rich motif) of MEPE (matrix extracellular phosphoglycoprotein) (MEPE-ASARM) may act as an endogenous anti-mineralization factor involved in X-linked hypophosphatemic rickets/osteomalacia (XLH). We synthesized MEPE-ASARM peptides and relevant peptide fragments with or without phosphorylated Ser residues (pSer) to determine the active site(s) of MEPE-ASARM in a rat calvaria cell culture model. None of the synthetic peptides elicited changes in cell death, proliferation or differentiation, but the peptide (pASARM) with three pSer residues inhibited mineralization without causing changes in gene expression of osteoblast markers tested. The anti-mineralization effect was maintained in peptides in which any one of three pSer residues was deleted. Polyclonal antibodies recognizing pASARM but not ASARM abolished the pASARM effect. Deletion of six N-terminal residues but leaving the recognition sites for PHEX (phosphate regulating endopeptidase homolog, X-linked), a membrane endopeptidase responsible for XLH, intact and two C-terminal amino acid residues did not alter the anti-mineralization activity of pASARM. Our results strengthen understanding of the active sites of MEPE-pASARM and allowed us to identify a shorter more stable sequence with fewer pSer residues still exhibiting hypomineralization activity, reducing peptide synthesis cost and increasing reliability for exploring biological and potential therapeutic effects.

Assessment of Cytotoxicity of Magnesium Oxide and Magnesium Hydroxide Nanoparticles using the Electric Cell-Substrate Impedance Sensing

Magnesium (Mg)-based alloys have the potential for bone repair due to their properties of biodegradation, biocompatibility, and structural stability, which can eliminate the requirement for a second surgery for the removal of the implant. Nevertheless, uncontrolled degradation rate and possible cytotoxicity of the corrosion products at the implant sites are known current challenges for clinical applications. In this study, we assessed in vitro cytotoxicity of different concentrations (0 to 50 mM) of possible corrosion products in the form of magnesium oxide (MgO) and magnesium hydroxide (Mg(OH)2) nanoparticles (NPs) in human fetal osteoblast (hFOB) 1.19 cells. We measured cell proliferation, adhesion, migration, and cytotoxicity using a real-time, label-free, non-invasive electric cell-substrate impedance sensing (ECIS) system. Our results suggest that 1 mM concentrations of MgO/Mg(OH)2 NPs are tolerable in hFOB 1.19 cells. Based on our findings, we propose the development of innovative biodegradable Mg-based alloys for further in vivo animal testing and clinical trials in orthopedics.

Effect of anodized zirconium implants on early osseointegration process in adult rats: a histological and histomorphometric study

Since surface plays a key role in bioactivity, the response of the host to the biomaterial will determine the success or failure of the prosthesis. The purpose of this study is to make an exhaustive analysis of the histological and histochemical characteristics of new bone tissue around Zr implants anodized at 60 V (Zr60) supported by histomorphometric methods in a rat model. Fibrous tissue was observed around the control implants (Zr0) and osteoblasts were identified on the trabeculae close to the implantation site that showed typical cytological characteristics of active secretory cells, regardless of the surface condition. The histomorphometrical analysis revealed a significant increase in cancellous bone volume, trabecular thickness and in trabecular number together with a decrease in trabecular separation facing Zr60. TRAP staining showed that there was a relative increase in the number of osteoclasts for Zr60. In addition, a larger number of osteoclast with a greater number of nuclei were detected in the tibiae for Zr60. This research demonstrated that the new bone microarchitecture in contact with Zr60 is able to improve the early stages of the osseointegration process and consequently the primary stability of implants which is a crucial factor to reduce recovery time for patients.

Biomaterials, Current Strategies, and Novel Nano-Technological Approaches for Periodontal Regeneration

Periodontal diseases involve injuries to the supporting structures of the tooth and, if left untreated, can lead to the loss of the tooth. Regenerative periodontal therapies aim, ideally, at healing all the damaged periodontal tissues and represent a significant clinical and societal challenge for the current ageing population. This review provides a picture of the currently-used biomaterials for periodontal regeneration, including natural and synthetic polymers, bioceramics (e.g., calcium phosphates and bioactive glasses), and composites. Bioactive materials aim at promoting the regeneration of new healthy tissue. Polymers are often used as barrier materials in guided tissue regeneration strategies and are suitable both to exclude epithelial down-growth and to allow periodontal ligament and alveolar bone cells to repopulate the defect. The problems related to the barrier postoperative collapse can be solved by using a combination of polymeric membranes and grafting materials. Advantages and drawbacks associated with the incorporation of growth factors and nanomaterials in periodontal scaffolds are also discussed, along with the development of multifunctional and multilayer implants. Tissue-engineering strategies based on functionally-graded scaffolds are expected to play an ever-increasing role in the management of periodontal defects.

Molecular analysis of biocompatibility of anodized titanium with deposited silver nanodendrites

Titanium (>99.6% purity) and its anodically oxidized modifications, with and without deposited silver nanodendrites regarding its biocompatibility were evaluated. In human gingival fibroblasts and osteoblast cell lines grown on tested samples, the level of expression of genes encoding αV (ITGAV) and β1 (ITGB1) integrin subunits also genes encoding focal adhesion (FAK) and extracellular-signal regulated (ERK) kinases was assessed. For this purpose, the qualitative and quantitative PCR technique was used. The expression of studied genes was dependent on the origin of cell lines and the type of evaluated material. The high expression of PBGD and ITGAV genes in fibroblasts grown on the surface of anodically modified titanium with deposited silver nanodendrites indicates potentially high biocompatibility of these samples for soft tissue cells. The high expression of the ITGB1 and ERK1 genes and the enhanced expression of the FAK gene in osteoblasts cells grown on the tested material was also observed. Summarizing, the nanocrystalline Ti modified with silver deposits showed higher biocompatibility in comparison with the conventional pure Ti samples.

Enhanced Tribological and Bacterial Resistance of Carbon Nanotube with Ceria- and Silver-Incorporated Hydroxyapatite Biocoating

Pertaining to real-life applications (by scaling up) of hydroxyapatite (HA)-based materials, herein is a study illustrating the role of carbon nanotube (CNT) reinforcement with ceria (CeO₂) and silver (Ag) in HA on titanium alloy (TiAl6V4) substrate, utilizing the plasma-spraying processing technique, is presented. When compared with pure HA coating enhanced hardness (from 2.5 to 5.8 GPa), elastic modulus (from 110 to 171 GPa), and fracture toughness (from 0.7 to 2.2 MPa·m^1/2) elicited a reduced wear rate from 55.3 × 10⁻⁵ mm³·N⁻¹·m⁻¹ to 2.1 × 10⁻⁵ mm³·N⁻¹·m⁻¹ in HA-CNT-CeO₂-Ag. Besides, an order of magnitude lower Archard’s wear constant and a 41% decreased shear stress by for HA-CNT-CeO₂-Ag coating depicted the effect of higher hardness and modulus of a material to control its wear phenomenon. Antibacterial property of 46% (bactericidal) is ascribed to Ag in addition to CNT-CeO₂ in HA. Nonetheless, the composite coating also portrayed exaggerated L929 fibroblast cell growth (4.8 times more than HA), which was visualized as flat and elongated cells with multiple filopodial protrusions. Hence, synthesis of a material with enhanced mechanical integrity resulting in tribological resistance and cytocompatible efficacy was achieved, thereupon making HA-CNT-CeO₂-Ag a scalable potent material for real-life load-bearing implantable bio-coating.

Different compact hybrid Langmuir-Blodgett-film coatings modify biomineralization and the ability of osteoblasts to grow

Calcium phosphates (CaPs) are biomaterials widely used in tissue regeneration with outstanding biological performance. Although the tremendous improvements achieved in CaP's materials research over the years, their interaction with physiological environments still need to be fully understood. The aim of this study is to explore a biomimetic Langmuir-Blodgett (LB) membrane to template the growth of hydroxyapatite (HAp) coatings on Ti surfaces and the ability of these coatings in inducing biomineralization by osteoblasts cultured in vitro. Changing the phospholipids (i.e., dihexadecyl phosphate (DHP) or octadecylphosphonic acid (OPA)), we also tuned the surface Ca²⁺ concentration. This structural feature gave rise to different LB-hybrid surfaces where the concentration of Ca²⁺ in the OPA/HAp was higher than the concentration of Ca²⁺ in DHP/HAp coating. The higher Ca²⁺ amount on OPA/HAp coatings, allied to the physical-chemical features, lead to different responses on osteoblasts, stimulating or inhibiting the natural biomineralization. The OPA/HAp coating caused a delay in the osteoblast proliferation as indicated by the decrease in the cell viability at the 7th culture day. Improved cell differentiation triggered by the DHP/HAp coating resulted in higher osteoblast biomineralization. The present data underscore that besides both coatings being composed by HAp, the final interfacial composition and physical-chemical properties influence differently the osteoblast behavior. Although the best osteoblast's viability was found to OPA/HAp, our dataset attested that DHP/HAp induced mineralization more effectively than that. This unexpected finding highlight the importance of deeply understanding the biomaterial interface and suggest a promising approach to the design of biofunctional LB-based coatings with tunable properties. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 2524-2534, 2018.

Three-Dimensional Printing of Nano Hydroxyapatite/Poly(ester urea) Composite Scaffolds with Enhanced Bioactivity

Polymer-bioceramic composites incorporate the desirable properties of each material while mitigating the limiting characteristics of each component. 1,6-Hexanediol l-phenylalanine-based poly(ester urea) (PEU) blended with hydroxyapatite (HA) nanocrystals were three-dimensional (3D) printed into porous scaffolds (75% porosity) via fused deposition modeling and seeded with MC3T3-E1 preosteoblast cells in vitro to examine their bioactivity. The resulting 3D printed scaffolds exhibited a compressive modulus of ∼50 MPa after a 1-week incubation in PBS at 37 °C, cell viability >95%, and a composition-dependent enhancement of radio-contrast. The influence of HA on MC3T3-E1 proliferation and differentiation was measured using quantitative real-time polymerase chain reaction, immunohistochemistry and biochemical assays. After 4 weeks, alkaline phosphatase activity increased significantly for the 30% HA composite with values reaching 2.5-fold greater than the control. Bone sialoprotein showed approximately 880-fold higher expression and 15-fold higher expression of osteocalcin on the 30% HA composite compared to those of the control. Calcium quantification results demonstrated a 185-fold increase of calcium concentration in mineralized extracellular matrix deposition after 4 weeks of cell culture in samples with higher HA content. 3D printed HA-containing PEU composites promote bone regeneration and have the potential to be used in orthopedic applications.

Effect of Nano-HA/Collagen Composite Hydrogels on Osteogenic Behavior of Mesenchymal Stromal Cells

This study aimed to comparatively evaluate the in vitro effect of nanosized hydroxyapatite and collagen (nHA/COL) based composite hydrogels (with different ratios of nHA and COL) on the behavior of human mesenchymal stromal cells (MSCs), isolated from either adipose tissue (AT-MSCs) or bone marrow (BM-MSCs). We hypothesized that (i) nHA/COL composite hydrogels would promote the osteogenic differentiation of MSCs in an nHA concentration dependent manner, and that (ii) AT-MSCs would show higher osteogenic potential compared to BM-MSCs, due to their earlier observed higher proliferation and osteogenic differentiation potential in 2D in vitro cultures [1]. The obtained results indicated that AT-MSCs show indeed high proliferation, differentiation and mineralization capacities in nHA/COL constructs compared to BM-MSCs, but this effect was irrespective of nHA concentration. Based on the results of alkaline phosphatase (ALP) activity and osteocalcin (OCN) protein level, the osteogenic differentiation of BM-MSCs started in the beginning of the culture period and for AT-MSCs at the end of the culture period. At a molecular level, both cell types showed high expression of osteogenic markers (bone morphogenic protein 2 [BMP2], runt-related transcription factor 2 [RUNX2], OCN or COL1) in both an nHA concentration and time dependent manner. In conclusion, AT-MSCs demonstrated higher osteogenic potential in nHA/COL based 3D micro-environments compared to BM-MSCs, in which proliferation and osteogenic differentiation were highly promoted in a time dependent manner, irrespective of nHA amount in the constructs. The fact that AT-MSCs showed high proliferation and mineralization potential is appealing for their application in future pre-clinical research as an alternative cell source for BM-MSCs.

Biphasic calcium phosphate ceramics for bone reconstruction: A review of biological response

Autologous bone graft is considered as the gold standard in bone reconstructive surgery. However, the quantity of bone available is limited and the harvesting procedure requires a second surgical site resulting in severe complications. Due to these limits, scientists and clinicians have considered alternatives to autologous bone graft. Calcium phosphates (CaPs) biomaterials including biphasic calcium phosphate (BCP) ceramics have proven efficacy in numerous clinical indications. Their specific physico-chemical properties (HA/TCP ratio, dual porosity and subsequent interconnected architecture) control (regulate/condition) the progressive resorption and the bone substitution process. By describing the most significant biological responses reported in the last 30years, we review the main events that made their clinical success. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

STATEMENT OF SIGNIFICANCE

Nowadays, BCPs are definitely considered as the gold standard of bone substitutes in bone reconstructive surgery. Among the numerous clinical studies in literature demonstrating the performance of BCP, Passuti et al. and Randsford et al. studies largely contributed to the emergence of the BCPs. It could be interesting to come back to the main events that made their success and could explain their large adhesion from scientists to clinicians. This paper aims to review the most significant biological responses reported in the last 30years, of these BCP-based materials. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

The modulation of stem cell behaviors by functionalized nanoceramic coatings on Ti-based implants

Nanoceramic coating on the surface of Ti-based metallic implants is a clinical potential option in orthopedic surgery. Stem cells have been found to have osteogenic capabilities. It is necessary to study the influences of functionalized nanoceramic coatings on the differentiation and proliferation of stem cells in vitro or in vivo. In this paper, we summarized the recent advance on the modulation of stem cells behaviors through controlling the properties of nanoceramic coatings, including surface chemistry, surface roughness and microporosity. In addition, mechanotransduction pathways have also been discussed to reveal the interaction mechanisms between the stem cells and ceramic coatings on Ti-based metals. In the final part, the osteoinduction and osteoconduction of ceramic coating have been also presented when it was used as carrier of BMPs in new bone formation.

•

The effects of basic physical properties like roughness, topography and porous stucture of ceramic coatings on the stem cells behaviors on Ti-based alloys have been reviewed together.

•

The chemical way to modulate the cell behaviors is also discussed in this review paper; and the related mechanotransduction pathways have been described in this paper.

Surface free energy predominates in cell adhesion to hydroxyapatite through wettability

The initial adhesion of cells to biomaterials is critical in the regulation of subsequent cell behaviors. The purpose of this study was to investigate a mechanism through which the surface wettability of biomaterials can be improved and determine the effects of biomaterial surface characteristics on cellular behaviors. We investigated the surface characteristics of various types of hydroxyapatite after sintering in different atmospheres and examined the effects of various surface characteristics on cell adhesion to study cell-biomaterial interactions. Sintering atmosphere affects the polarization capacity of hydroxyapatite by changing hydroxide ion content and grain size. Compared with hydroxyapatite sintered in air, hydroxyapatite sintered in saturated water vapor had a higher polarization capacity that increased surface free energy and improved wettability, which in turn accelerated cell adhesion. We determined the optimal conditions of hydroxyapatite polarization for the improvement of surface wettability and acceleration of cell adhesion.

Effect of surface topography and bioactive properties on early adhesion and growth behavior of mouse preosteoblast MC3T3-E1 cells

The effects of bioactive properties and surface topography of biomaterials on the adhesion and spreading properties of mouse preosteoblast MC3T3-E1 cells was investigated by preparation of different surfaces. Poly lactic-co-glycolic acid (PLGA) electrospun fibers (ES) were produced as a porous rough surface. In our study, coverslips were used as a substrate for the immobilization of 3,4-dihydroxyphenylalanine (DOPA) and collagen type I (COL I) in the preparation of bioactive surfaces. In addition, COL I was immobilized onto porous electrospun fibers surfaces (E-COL) to investigate the combined effects of bioactive molecules and topography. Untreated coverslips were used as controls. Early adhesion and growth behavior of MC3T3-E1 cells cultured on the different surfaces were studied at 6, 12, and 24 h. Evaluation of cell adhesion and morphological changes showed that the all the surfaces were favorable for promoting the adhesion and spreading of cells. CCK-8 assays and flow cytometry revealed that both topography and bioactive properties were favorable for cell growth. Analysis of β1, α1, α2, α5, α10 and α11 integrin expression levels by immunofluorescence, real-time RT-PCR, and Western blot and indicated that surface topography plays an important role in the early stage of cell adhesion. However, the influence of topography and bioactive properties of surfaces on integrins is variable. Compared with any of the topographic or bioactive properties in isolation, the combined effect of both types of properties provided an advantage for the growth and spreading of MC3T3-E1 cells. This study provides a new insight into the functions and effects of topographic and bioactive modifications of surfaces at the interface between cells and biomaterials for tissue engineering.

Interfacial characteristics and determination of cohesive and adhesive strength of plasma-coated hydroxyapatite via nanoindentation and microscratch techniques

We investigate the chemical composition and mechanical properties of plasma-deposited hydroxyapatite on grit-blasted Ti-6Al-4V coupons as models of typical prosthetic hip implants. Nanoindentation is used to extract the mechanical properties of the hydroxyapatite (HA) coating and to evaluate the behavior of the material as a function of distance from the interface. A microscratch technique was used to determine parameters of cohesive and adhesive failure of the material that are critical in determining the functionality of these biomedical devices. This delamination method has not been studied in detail before and is usually considered to be unsuitable because of the thickness of the HA and the roughness of the substrate. However, through cross-section analysis of the scratch test, we can determine the point at which the HA delaminates from the substrate. It was concluded that spallation occurs locally, and there is no evidence of gross spallation, indicating that the coating is well adhered to the substrate.

Injectable biocomposites for bone healing in rabbit femoral condyle defects

A novel biomimetic bone scaffold was successfully prepared in this study, which was composed of calcium sulfate hemihydrate (CSH), collagen and nano-hydroxyapatite (nHAC). CSH/nHAC was prepared and observed with scanning electron microscope and rhBMP-2 was introduced into CSH/nHAC. The released protein content from the scaffold was detected using high performance liquid chromatography at predetermined time interval. In vivo bone formation capacity was investigated by means of implanting the scaffolds with rhBMP-2 or without rhBMP-2 respectively into a critical size defect model in the femoral condyle of rabbit. The releasing character of rhBMP-2 was that an initial burst release (37.5%) was observed in the first day, followed by a sustained release and reached 100% at the end of day 20. The CSH/nHAC showed a gradual decrease in degradation with the content of nHAC increase. The results of X-rays, Micro CT and histological observation indicated that more new bone was formed in rhBMP-2 group. The results implied that this new injectable bone scaffold should be very promising for bone repair and has a great potential in bone tissue engineering.

Mineralized polycaprolactone nanofibrous matrix for odontogenesis of human dental pulp cells

The aim of the present study was to fabricate mineralized polycaprolactone nanofibrous scaffold and investigate its ability to elicit odontogenic differentiation of human dental pulp cells, compared to the pure polycaprolactone scaffold. Polycaprolactone nanofibrous scaffold was produced by electrospinning, and the surface was mineralized with apatite. Cellular behaviors on the mineralized polycaprolactone scaffold were assessed in terms of cell adhesion, growth, and odontoblastic differentiation. To evaluate the signal transduction of human dental pulp cells, mRNA expression was analyzed and Western blotting was performed. Mineralized polycaprolactone showed improved cell proliferation, mineralized nodule formation, and expression of odontoblastic marker genes including alkaline phosphatase, osteopontin, osteocalcin, dentin sialophosphoprotein (DSPP), and dentin matrix protein-1, as compared with pure polycaprolactone. Although the cell adhesion on the mineralized polycaprolactone was similar to that of the polycaprolactone, the expression level of proteins including collagen type I and the key adhesion receptor (integrin components α1, α2, and β1) was upregulated in mineralized polycaprolactone compared to polycaprolactone. Especially, cells seeded onto mineralized polycaprolactone scaffolds showed significantly increased levels of phosphorylated focal adhesion kinase, a marker of integrin activation, and downstream pathways, such as phosphor (p)-Akt, p-extracellular signal regulated kinase, p-c Jun N-terminal kinase, nuclear factor-kappa B, c-fos, and c-jun, compared with pure polycaprolactone. The mineralized polycaprolactone scaffold is attractive for dentin tissue engineering by promoting growth and odontogenic differentiation of human dental pulp cells through the integrin-mediated signaling pathway.

Integrin-mediated osteoblastic adhesion on a porous manganese-incorporated TiO2 coating prepared by plasma electrolytic oxidation

This study was conducted to evaluate the bioactivity of manganese-incorporated TiO₂ (Mn-TiO₂) coating prepared on titanium (Ti) plate by plasma electrolytic oxidation (PEO) technique in Ca-, P- and Mn-containing electrolytes. The surface topography, phase and element compositions of the coatings were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrometry (EDS), respectively. The adhesion of osteoblast-like MG63 cells onto Ti, TiO₂ and Mn-TiO₂ surfaces was evaluated, and the signal transduction pathway involved was confirmed by the sequential expression of the genes for integrins β₁, β₃, α₁ and α₃, focal adhesion kinase (FAK), and the extracellular regulated kinases (ERKs), including ERK1 and ERK2. The results obtained indicated that Mn was successfully incorporated into the porous nanostructured TiO₂ coating, and did not alter the surface topography or the phase composition of the coating. The adhesion of the MG63 cells onto the Mn-incorporated TiO₂ coating was significantly enhanced compared with that on the Mn-free TiO₂ coating and the pure Ti plates. In addition, the enhanced cell adhesion on the Mn-TiO₂ coatings may have been mediated by the binding of the integrin subunits, β₁ and α₁, and the subsequent signal transduction pathway, involving FAK and ERK2. The study indicated that the novel Mn-TiO₂ coating has potential for orthopedic implant applications, and that further investigations are required.

Cellular function and adhesion mechanisms of human bone marrow mesenchymal stem cells on multi-walled carbon nanotubes

Multiwalled carbon nanotubes (MWCNTs) are considered to be excellent reinforcements for biorelated applications, but, before being incorporated into biomedical devices, their biocompatibility need to be investigated thoroughly. We investigated the ability of films of pristine MWCNTs to influence human mesenchymal stem cells' proliferation, morphology, and differentiation into osteoblasts. Moreover, the selective integrin subunit expression and the adhesion mechanism to the substrate were evaluated on the basis of adherent cell number and adhesion strength, following the treatment of cells with blocking antibodies to a series of integrin subunits. Results indicated that MWCNTs accelerated cell differentiation to a higher extent than tissue culture plastic, even in the absence of additional biochemical inducing agents. The pre-treatment with anti-integrin antibodies decreased number of adherent cells and adhesion strength at 4-60%, depending on integrin subunit. These findings suggest that pristine MWCNTs represent a suitable reinforcement for bone tissue engineering scaffolds.

Application of calcium phosphate materials in dentistry

Calcium phosphate materials are similar to bone in composition and in having bioactive and osteoconductive properties. Calcium phosphate materials in different forms, as cements, composites, and coatings, are used in many medical and dental applications. This paper reviews the applications of these materials in dentistry. It presents a brief history, dental applications, and methods for improving their mechanical properties. Notable research is highlighted regarding (1) application of calcium phosphate into various fields in dentistry; (2) improving mechanical properties of calcium phosphate; (3) biomimetic process and functionally graded materials. This paper deals with most common types of the calcium phosphate materials such as hydroxyapatite and tricalcium phosphate which are currently used in dental and medical fields.

Effects of hydroxyapatite-containing composite nanofibers on osteogenesis of mesenchymal stem cells in vitro and bone regeneration in vivo

Among a variety of polymers, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), a microbial polyester, with biodegradable, nonantigenic, and biocompatible properties, is attracting more and more attention in tissue engineering. Hydroxyapatite (HA), similar to the mineral component of natural bone, is known to be osteoconductive, nontoxic, and noninflammatory. In this study, aligned and random-oriented PHBV nanofibrous scaffolds loaded with HA nanoparticles were fabricated through electrospinning technique. Mesenchymal stem cells (MSCs) derived from rat bone marrow were used to investigate the effects of HA and orientation of fibers on cell proliferation and differentiation in vitro. Cell proliferation tested with CCK-8 assay indicated that the MSCs attached and proliferated more favorably on random-oriented PHBV nanofibrous meshes without HA. After one, two and four weeks of cell seeding, osteogenic markers including alkaline phosphate (ALP), osteocalcin (OCN), and mineralized matrix deposits were detected, respectively. The results indicated that the introduction of HA could induce MSCs to differentiate into osteoblasts. Moreover, 3D PHBV/HA scaffolds made from aligned and random-oriented nanofibers were implanted into critical-sized rabbit radius defects and exhibited significant effects on the repair of critical bone defects, implying their promising applications in bone tissue engineering.

Significance of nano- and microtopography for cell-surface interactions in orthopaedic implants

Cell-surface interactions play a crucial role for biomaterial application in orthopaedics. It is evident that not only the chemical composition of solid substances influence cellular adherence, migration, proliferation and differentiation but also the surface topography of a biomaterial. The progressive application of nanostructured surfaces in medicine has gained increasing interest to improve the cytocompatibility and osteointegration of orthopaedic implants. Therefore, the understanding of cell-surface interactions is of major interest for these substances. In this review, we elucidate the principle mechanisms of nano- and microscale cell-surface interactions in vitro for different cell types onto typical orthopaedic biomaterials such as titanium (Ti), cobalt-chrome-molybdenum (CoCrMo) alloys, stainless steel (SS), as well as synthetic polymers (UHMWPE, XLPE, PEEK, PLLA). In addition, effects of nano- and microscaled particles and their significance in orthopaedics were reviewed. The significance for the cytocompatibility of nanobiomaterials is discussed critically.

Detachment strength of human osteoblasts cultured on hydroxyapatite with various surface roughness. Contribution of integrin subunits

Hydroxyapatite (HA) has been widely used as a bone substitute in dental, maxillofacial and orthopaedic surgery and as osteoconductive bone substitute or precoating of pedicle screws and cages in spine surgery. The aim of the present study was to investigate the osteoblastic adhesion strength on HA substrata with different surface topography and biochemistry (pre-adsorption of fibronectin) after blocking of specific integrin subunits with monoclonal antibodies. Stoichiometric HA was prepared by precipitation followed by ageing and characterized by SEM, EDX, powder XRD, Raman spectroscopy, TGA, and specific surface area analysis. Human bone marrow derived osteoblasts were cultured on HA disc-shaped substrata which were sintered and polished resulting in two surface roughness grades. For attachment evaluation, cells were incubated with monoclonal antibodies and seeded for 2 h on the substrata. Cell detachment strength was determined using a rotating disc device. Cell detachment strength was surface roughness, fibronectin preadsorption and intergin subunit sensitive.

Role of surface chemistry in protein remodeling at the cell-material interface

Background

The cell-material interaction is a complex bi-directional and dynamic process that mimics to a certain extent the natural interactions of cells with the extracellular matrix. Cells tend to adhere and rearrange adsorbed extracellular matrix (ECM) proteins on the material surface in a fibril-like pattern. Afterwards, the ECM undergoes proteolytic degradation, which is a mechanism for the removal of the excess ECM usually approximated with remodeling. ECM remodeling is a dynamic process that consists of two opposite events: assembly and degradation.

Methodology/Principal Findings

This work investigates matrix protein dynamics on mixed self-assembled monolayers (SAMs) of –OH and –CH₃ terminated alkanethiols. SAMs assembled on gold are highly ordered organic surfaces able to provide different chemical functionalities and well-controlled surface properties. Fibronectin (FN) was adsorbed on the different surfaces and quantified in terms of the adsorbed surface density, distribution and conformation. Initial cell adhesion and signaling on FN-coated SAMs were characterized via the formation of focal adhesions, integrin expression and phosphorylation of FAKs. Afterwards, the reorganization and secretion of FN was assessed. Finally, matrix degradation was followed via the expression of matrix metalloproteinases MMP2 and MMP9 and correlated with Runx2 levels. We show that matrix degradation at the cell material interface depends on surface chemistry in MMP-dependent way.

Conclusions/Significance

This work provides a broad overview of matrix remodeling at the cell-material interface, establishing correlations between surface chemistry, FN adsorption, cell adhesion and signaling, matrix reorganization and degradation. The reported findings improve our understanding of the role of surface chemistry as a key parameter in the design of new biomaterials. It demonstrates the ability of surface chemistry to direct proteolytic routes at the cell-material interface, which gains a distinct bioengineering interest as a new tool to trigger matrix degradation in different biomedical applications.

Focal adhesions in osteoneogenesis

As materials technology and the field of tissue engineering advance, the role of cellular adhesive mechanisms, in particular, interactions with implantable devices, becomes more relevant in both research and clinical practice. A key tenet of medical device technology is to use the exquisite ability of biological systems to respond to the material surface or chemical stimuli in order to help to develop next-generation biomaterials. The focus of this review is on recent studies and developments concerning focal adhesion formation in osteoneogenesis, with an emphasis on the influence of synthetic constructs on integrin-mediated cellular adhesion and function.

Early osteogenic signal expression of rat bone marrow stromal cells is influenced by both hydroxyapatite nanoparticle content and initial cell seeding density in biodegradable nanocomposite scaffolds

Incorporation of hydroxyapatite (HA) within a degradable polymeric scaffold may provide a favorable synthetic microenvironment that more closely mimics natural bone tissue physiology. Both incorporation of HA nanoparticles and alterations of the paracrine cell-cell signaling distance may affect the intercellular signaling mechanism and facilitate enhanced osteogenic signal expression among the implanted cell population. In this study we investigate the effect of the incorporation of HA nanoparticles into poly(propylene fumarate) (PPF) scaffolds on the surface properties of composite scaffolds and early osteogenic growth factor gene expression in relation to initial cell seeding density. The results of surface characterization indicated that HA addition improved the surface properties of PPF/HA composite scaffolds by increasing the roughness, hydrophilicity, protein adsorption, and initial cell attachment. Rat bone marrow stromal cells (BMSCs), which were CD34-, CD45-, CD29+, and CD90+, were cultured on three-dimensional (3-D) macroporous PPF/HA scaffolds at two different initial cell seeding densities (0.33 and 1.00 million cells per scaffold) for 8 days. The results demonstrated that endogenous osteogenic signal expression profiles, including bone morphogenetic protein-2, fibroblast growth factor-2, and transforming growth factor-β1, as well as the transcriptional factor Runx2, were affected by both HA amount and initial cell seeding density. Up-regulated expression of osteogenic growth factor genes was related to subsequent osteoblastic differentiation of rat BMSCs on 3-D scaffolds, as characterized by alkaline phosphatase activity, osteocalcin mRNA expression, and calcium deposition. Thus, the PPF/HA composite scaffold construction parameters, including amount of HA incorporated and initial cell seeding density, may be utilized to induce the osteoblastic differentiation of transplanted rat BMSCs.

The influence of bisphosphonates on human osteoblast migration and integrin aVb3/tenascin C gene expression in vitro

Background

Bisphosphonates are therapeutics of bone diseases, such as Paget's disease, multiple myeloma or osteoclastic metastases. As a severe side effect the bisphosphonate induced osteonecrosis of the jaw (BONJ) often requires surgical treatment and is accompanied with a disturbed wound healing.

Therefore, the influence on adhesion and migration of human osteoblasts (hOB) after bisphosphonate therapy has been investigated by morphologic as well as gene expression methods.

Methods

By a scratch wound experiment, which measures the reduction of defined cell layer gap, the morphology and migration ability of hOB was evaluated. A test group of hOB, which was stimulated by zoledronate 5 × 10^-5M, and a control group of unstimulated hOB were applied. Furthermore the gene expression of integrin aVb3 and tenascin C was quantified by Real-Time rtPCR at 5data points over an experimental period of 14 days. The bisphosphonates zoledronate, ibandronate and clodronate have been compared with an unstimulated hOB control.

Results

After initially identical migration and adhesion characteristics, zoledronate inhibited hOB migration after 50 h of stimulation. The integrinavb3 and tenascin C gene expression was effected by bisphosphonates in a cell line dependent manner with decreased, respectively inconsistent gene expression levels over time. The non-nitrogen containing bisphosphonates clodronate led to decreased gene expression levels.

Conclusion

Bisphosphonates seem to inhibit hOB adhesion and migration. The integrin aVb3 and tenascin C gene expression seem to be dependent on the cell line. BONJ could be enhanced by an inhibition of osteoblast adhesion and migration. The gene expression results, however, suggest a cell line dependent effect of bisphosphonates, which could explain the interindividual differences of BONJ incidences.

A review of the biological response to ionic dissolution products from bioactive glasses and glass-ceramics

Several inorganic materials such as special compositions of silicate glasses, glass-ceramics and calcium phosphates have been shown to be bioactive and resorbable and to exhibit appropriate mechanical properties which make them suitable for bone tissue engineering applications. However, the exact mechanism of interaction between the ionic dissolution products of such inorganic materials and human cells are not fully understood, which has prompted considerable research work in the biomaterials community during the last decade. This review comprehensively covers literature reports which have investigated specifically the effect of dissolution products of silicate bioactive glasses and glass-ceramics in relation to osteogenesis and angiogenesis. Particularly, recent advances made in fabricating dense biomaterials and scaffolds doped with trace elements (e.g. Zn, Sr, Mg, and Cu) and investigations on the effect of these elements on the scaffold biological performance are summarized and discussed in detail. Clearly, the biological response to artificial materials depends on many parameters such as chemical composition, topography, porosity and grain size. This review, however, focuses only on the ion release kinetics of the materials and the specific effect of the released ionic dissolution products on human cell behaviour, providing also a scope for future investigations and identifying specific research needs to advance the field. The biological performance of pure and doped silicate glasses, phosphate based glasses with novel specific compositions as well as several other silicate based compounds are discussed in detail. Cells investigated in the reviewed articles include human osteoblastic and osteoclastic cells as well as endothelial cells and stem cells.

Improvement on the performance of bone regeneration of calcium sulfate hemihydrate by adding mineralized collagen

Comparative investigations of bone regeneration performance for calcium sulfate hemihydrate (CaSO(4).(1/2)H(2)O; CSH) only and CSH with mineralized collagen are reported in this article. The mineralized collagen is the nanohydroxyapatite/collagen (nHAC). The investigations included biocompatibility in vitro and performance of bone repair in vivo. Quantitative and qualitative biocompatibility assays with bone stromal stem cells were performed. A critical box-shaped defect model in the mandible of the rabbit was used to evaluate the bone-remodeling ability of CSH and nHAC/CSH. Results in vitro indicated that the nHAC/CSH significantly improved bioactivity compared with that of CSH, especially in promoting cell adhesion. Further, a higher bone remodeling activity was observed around nHAC/CSH composite than the CSH, especially at the early stage of remodeling. This result means that nHAC/CSH could cause an earlier accelerator and better osseointegration for bone repair than CSH only.

In vitro evaluation of osteoblastic cell adhesion on machined osseointegrated implants

At present the major consideration in planning an implant design is to seek biocompatible surfaces that promote a favorable response from both cells and host tissues. Different treatments of implant surfaces may modulate the adhesion, proliferation and phenotypic expression of osteoblastic cells. For this reason, the aim of the present study was to evaluate the biocompatibility of an implant surface, observing adhesion, cell morphology and proliferation of osteoblast-like cells cultivated on a commercially available titanium dental implant (Titamax Liso, Neodent, Curitiba, PR, Brazil). The implant samples were immersed into an osteoblast-like cell (Osteo-1) suspension for a period of 24, 48 and 72 hours. After seeding the cells, the samples were prepared for analyses through scanning electron microscopy. Based on the surface analysis, the osteoblastic cells adhered to the machined surface after 24 hours in culture. In 48 hours, the cells spread over the implant surface, and after 72 hours a proliferation of cells with large and flat bodies was observed over the machined implant surface. These results demonstrate that the machined titanium surface studied is biocompatible since it allowed adhesion and proliferation of the osteoblast-like cells, in addition to preserving cell integrity and the morphologic characteristics of cells during the studied period.

Integrin and chemokine receptor gene expression in implant-adherent cells during early osseointegration

The mechanisms of early cellular recruitment and interaction to titanium implants are not well understood. The aim of this study was to investigate the expression of pro-inflammatory cytokines, chemokines and adhesion markers during the first 24 h of implantation. Anodically oxidized and machined titanium implants were inserted in rat tibia. After 3, 12, and 24 h the implants were unscrewed and analyzed with quantitative polymerase chain reaction. Immunohistochemistry and scanning electron microscopy revealed different cell types, morphology and adhesion at the two implant surfaces. A greater amount of cells, as indicated by higher expression of small subunit ribosomal RNA (18S), was detected on the oxidized surface. Higher expression of CXC chemokine receptor-4 (at 12 h) and integrins, alphav (at 12 h), beta1 (at 24 h) and beta2 (at 12 and 24 h) was detected at the oxidized surfaces. Significantly higher tumor necrosis factor-alpha (at 3 h) and interleukin-1beta (at 24 h) expression was demonstrated for the machined surface. It is concluded that material surface properties rapidly modulate the expression of receptors important for the recruitment and adhesion of cells which are crucial for the inflammatory and regenerative processes at implant surfaces in vivo.

Surface electric fields increase osteoblast adhesion through improved wettability on hydroxyapatite electret

Osteoblasts are susceptible to the surface characteristics of bioceramics and stimulation from outside the cells. The purpose of this study was to evaluate the effects of electrical polarization on surface characteristics and osteoblastic adhesion. The surface characteristics revealed that electrical polarization had no effect on the surface roughness, crystallinity, and constituent elements. According to contact-angle measurements, electrically polarized hydroxyapatite (HA), which provides two kinds of surfaces, negatively charged HA (N-HA) and positively charged HA (P-HA), was even more hydrophilic than that of normal HA (O-HA). Morphological observations and quantitative analyses revealed that the typical adhered cells had a round shape on O-HA but had a spindle or fanlike spreading configuration on N-HA and P-HA 1 h after seeding. After 3 h of cultivation, the rate of the number of spread cells and the size of the focal adhesions on O-HA increased and approached that of N-HA and P-HA. However, the cell areas positively stained for actin, which indicates the degree of cell spreading, were distinctly larger on N-HA and P-HA than that on O-HA. The number of focal adhesions per cell was also less than that on N-HA and P-HA.

Study of hydroxyapatite osteoinductivity with an osteogenic differentiation of mesenchymal stem cells

Osteoinductivity of hydroxyapatite (HA) was investigated using uncommitted pluripotent mouse stem cells, C3H10T1/2 in an in vitro differentiation assay. For comparative analysis, the cells were cultured on substrates made of osteoinductive HA, with biocompatible titanium and plastics as the negative control. HA exhibited the ability to induce expression of osteo-specific genes in C3H10T1/2, including alkaline phosphatase (ALP), type I collagen, and osteocalcin; compared with its insignificant up-regulation of the same genes in osteoblast-like cells, Saos-2. HA osteoinductivity exhibited in C3H10T1/2 was comparable to that of a bone morphogenetic protein (BMP) with reference to the up-regulation of osteo-specific genes except the core binding factor 1 (Cbfa1, Runx). This result implies a difference in osteogenic induction pathway initiated by HA and BMP. Using this mesenchymal stem cells (MSC) culture assay, osteoinductivity was also demonstrated to be present in the conditioned medium derived from MSC cultured on HA substrates. This conditioned medium exhibited excellent ability to up-regulate ALP in the absence of HA and BMP. The results suggest that the HA can interact with the cells and generate potent inductive substance released into the medium. Such substance in turn is able to induce uncommitted cells to differentiate into the osteolineage.

The effect of collagen I mimetic peptides on mesenchymal stem cell adhesion and differentiation, and on bone formation at hydroxyapatite surfaces

Integrin-binding peptides increase cell adhesion to naive hydroxyapatite (HA), however, in the body, HA becomes rapidly modified by protein adsorption. Previously we reported that, when combined with an adsorbed protein layer, RGD peptides interfered with cell adhesion to HA. In the current study we evaluated mesenchymal stem cell (MSC) interactions with HA disks coated with the collagen-mimetic peptides, DGEA, P15 and GFOGER. MSCs adhered equally well to disks coated with DGEA, P15, or collagen I, and all three substrates, but not GFOGER, supported greater cell adhesion than uncoated HA. When peptide-coated disks were overcoated with proteins from serum or the tibial microenvironment, collagen mimetics did not inhibit MSC adhesion, as was observed with RGD, however neither did they enhance adhesion. Given that activation of collagen-selective integrins stimulates osteoblastic differentiation, we monitored osteocalcin secretion and alkaline phosphatase activity from MSCs adherent to DGEA or P15-coated disks. Both of these osteoblastic markers were upregulated by DGEA and P15, in the presence and absence of differentiation-inducing media. Finally, bone formation on HA tibial implants was increased by the collagen mimetics. Collectively these results suggest that collagen-mimetic peptides improve osseointegration of HA, most probably by stimulating osteoblastic differentiation, rather than adhesion, of MSCs.

Gene expression analysis of osteoblasts seeded in coral scaffold

Coral matrix of Porites sp. has the suitable properties for bone cell growth. This study was aimed to study the gene expression levels of osteoblast specific genetic markers; RUNX2, osteopontin, alkaline phosphatase and osteocalcin from osteoblasts seeded in coral scaffold, which are important in determining the feasibility of osteoblasts. Human osteoblasts were inoculated onto the processed coral in Dulbecco's Minimum Essential Medium. The cells were trypsinized on day 1, 7, 14, 18, and 21 and added with RNALater for preservation of RNA in cells. The RNA was extracted using commercial RNA extraction kit and the respective genes were amplified using RT-PCR kit and analyzed qualitatively on 1.5% agarose gel. The expressions were evaluated with the Integrated Density Value based on the intensity of band for different periods of cell harvest. Increased expressions of the RUNX2, osteopontin, alkaline phosphatase and osteocalcin genes in the present study proved that coral is a favorable carrier for osteogenetically competent cells to attach and remain viable.

A novel gellan gel-based microcarrier for anchorage-dependent cell delivery

Competent vehicles are highly sought after as a means to transplant cells for tissue regeneration. In this study, novel hydrogel-based microspherical cell carriers are designed and developed with an FDA-approved natural polysaccharide, gellan gum. The bulk fabrication of these microspheres is performed via a water-in-oil (W/O) emulsion process followed by a series of redox (oxidation-reduction) crosslinking treatments; this enables the microspherical dimensions to be precisely manipulated in terms of injectability, and simultaneously ensures the structural stability. To acquire adhesion affinity with anchorage-dependent cells (ADCs), a covalent coating of gelatin is further applied on the microspherical surfaces. The final product is constructed as a variety of gelatin-grafted-gellan microspherical cell carriers, abbreviated as "TriG" microcarriers. The cell-loading tests are conducted, respectively, with human dermal fibroblasts (HDFs) and human fetal osteoblasts (hFOBs). Morphological observation from optical microscopy and field emission scanning electron microscopy indicates that the HDFs spread well and populate rapidly on surfaces of TriG microcarriers. Immunofluorescent staining reveals the activation of focal adhesion and subsequent organization of F-actin from the attached cell surfaces, which suggests the TriG microspherical substrate is favorable to ADC adhesion and therefore capable of promoting HDF proliferation to achieve confluence by turning over three times within 10 days. The hFOBs are also cultivated on the TriG carriers, where ideal viability and clear potentials for osteogenesis are demonstrated by fluorescent "Live/Dead" screening and specific histobiochemical indications. All these findings suggest that the TriG microcarriers are suitable to provide open platforms for therapeutic ADC proliferation and differentiation.

Differential regulation of the attachment of Kaposi's sarcoma-associated herpesvirus (KSHV)-infected human B cells to extracellular matrix by KSHV-encoded gB and cellular alphaV integrins

Kaposi's sarcoma-associated herpesvirus (KSHV) has two modes of replications: latent and lytic replications. Reactivation from latency is dictated, in part, by the cell cycle. Herein, we have attempted to delineate the importance of cell cycle in KSHV pathogenesis by exploring the expression pattern of cell-surface receptors during different phases of the cell cycle. alphaV integrin expression is augmented during S phase in fibroblasts, epithelial and KSHV-infected cells. Using a Matrigel system, we pioneer the concept that KSHV-infected primary effusion lymphoma cells can attach to extracellular matrix proteins. This attachment is mediated primarily via alphaV integrins or virally encoded gB, and occurs preferentially in cells from S phase or cells from S phase actively supporting a lytic infection respectively. Such an ability of infected B cells to attach to endothelial cells may also aid in the dissemination of infection. The keystone of this work is that for the first time, we describe the ability of KSHV-infected B cells to preferentially use cellular (alphaV) or viral (gB) receptors to specifically bind cells, depending upon the stage of the cell cycle and infection.

Plasma-sprayed carbon nanotube reinforced hydroxyapatite coatings and their interaction with human osteoblasts in vitro

Carbon nanotubes (CNT) possess excellent mechanical properties to play the role as reinforcement for imparting strength and toughness to brittle hydroxyapatite (HA) bioceramic coating. However, lack of processing technique to uniformly distribute multiwalled CNTs in HA coating and limited studies and sparse knowledge evincing toxicity of CNTs has kept researchers in dispute for long. In the current work, we have addressed these issues by (i) successfully distributing multiwalled CNT reinforcement in HA coating using plasma spraying to improve the fracture toughness (by 56%) and enhance crystallinity (by 27%), and (ii) culturing human osteoblast hFOB 1.19 cells onto CNT reinforced HA coating to elicit its biocompatibility with living cells. Unrestricted growth of human osteoblast hFOB 1.19 cells has been observed near CNT regions claiming assistance by CNT surfaces to promote cell growth and proliferation.