Heparin intercalation into reconstituted collagen I fibrils: Impact on growth kinetics and morphology

Governing the aggregation of type I collagen mediated through β-cyclodextrin

The effect of carbohydrates on collagen self-assembly behavior has been widely investigated because of their regulation on collagen fibrogenesis in vivo. In this paper, β-cyclodextrin (β-CD) was selected as an external disturbance to explore its intrinsic regulating mechanism on collagen self-assembly. The results of fibrogenesis kinetics indicated that β-CD had a bilateral regulation on collagen self-aggregation process, which was closely related to the content of β-CD: collagen protofibrils with low β-CD content were less aggregated compared to collagen protofibrils with high β-CD content. However, typical periodic stripes of ~67 nm on collagen fibrils were observed from transmission electron microscope (TEM), indicating that β-CD did not disturb the lateral arrangement of collagen molecules to form a 1/4 staggered structure. Correspondingly, the degree of aggregation of collagen self-assembled fibrils was closely correlated with the addition of β-CD content, as confirmed by field emission scanning electron microscopy (FESEM) and atomic force microscope (AFM). In addition, collagen/β-CD fibrillar hydrogel had good thermal stability and cytocompatibility. These results provide a better understanding of how to construct a structurally reliable collagen/β-CD fibrillar hydrogel as a biomedical material in a β-CD-regulated environment.

The Texture Change of Chinese Traditional Pig Trotter with Soy Sauce during Stewing Processing: Based on a Thermal Degradation Model of Collagen Fibers

In order to clarify the influence of the thermal degradation of collagen fibers on the texture profile analysis (TPA) parameters of pig trotter stewed with soy sauce (PTSWSS), TPA (springiness, chewiness, hardness, and gumminess), the secondary structures, the cross-linkage, decorin (DCN) and glycosaminoglycan (GAG) levels, and the histochemical morphology of collagen fibers during the stewing process (0, 30, 60, 120 min) were assessed. The springiness and hardness increased after 30 min of stewing, along with the denaturation of collagen proteins. TPA parameters improved with the prolonged stewing times of 60 and 120 min, along with the ultra-structural dissolution of collagen fibers, and a substantial reduction in cross-linkage, DCN, and GAG levels, and the unfolded triple-helix structure. This study concluded that the TPA parameters of PTSWSS were dependent on the stewing time, and that the improvement in TPA parameters with longer stewing time could primarily be attributed to the thermal degradation of collagen fibers.

Impact of binding mode of low-sulfated hyaluronan to 3D collagen matrices on its osteoinductive effect for human bone marrow stromal cells

Synthetically sulfated hyaluronan derivatives were shown to facilitate osteogenic differentiation of human bone marrow stromal cells (hBMSC) by application in solution or incorporated in thin collagen-based coatings. In the presented study, using a biomimetic three-dimensional (3D) cell culture model based on fibrillary collagen I (3D Col matrix), we asked on the impact of binding mode of low sulfated hyaluronan (sHA) in terms of adsorptive and covalent binding on osteogenic differentiation of hBMSC. Both binding modes of sHA induced osteogenic differentiation. Although for adsorptive binding of sHA a strong intracellular uptake of sHA was observed, implicating an intracellular mode of action, covalent binding of sHA to the 3D matrix induced also intense osteoinductive effects pointing towards an extracellular mode of action of sHA in osteogenic differentiation. In summary, the results emphasize the relevance of fibrillary 3D Col matrices as a model to study hBMSC differentiation in vitro in a physiological-like environment and that sHA can display dose-dependent osteoinductive effects in dependence on presentation mode in cell culture scaffolds.

Insight into the effect of sulfonated chitosan on the structure, rheology and fibrillogenesis of collagen

As a heparin analogue, sulfonated chitosan (SCS) has been confirmed to have similar structure and properties to heparin which is shown to be a linker molecule having specific binding sites with collagen fibrils. In this study, the effects of a varying concentration of SCS on the self-assembly process of type I collagen were investigated. The study on intermolecular interaction between collagen and SCS was carried out via using ultraviolet-visible (UV-vis) spectrophotometry and circular dichroism (CD) spectroscopy. The addition of SCS did not disrupt the triple helix conformation of collagen. However, the decreased value of Rpn showed that the SCS, to some extent, influenced the percentage of triple helix conformation. The turbidity measurements revealed that the self-assembly rate was increased in the presence of a low concentration of SCS whereas decreased with further increasing the SCS concentration. The observation of microstructure via scanning electron microscopy (SEM) and atomic force microscopy (AFM) exhibited the characteristic D-periodicity, indicating that the presence of SCS did not disrupt the self-assembly nature of collagen. Moreover, the addition of SCS facilitated the lateral aggregation of fibrils, leading to the formation of larger fibrils. The rheological analysis showed that the gelation time of collagen was prolonged with increasing the concentration of SCS, in support of a longer lag-phase duration detected in turbidimetric measurements. We expect that valuable data would be provided in this study for further developing of ECM analogues, and propitious performances could be endowed to these biomimetic materials after SCS incorporation.

Insight into the role of grafting density in the self-assembly of acrylic acid-grafted-collagen

Side chain modification of collagen provides an attractive way to enhance their structure and functions, which is highly desirable for the development of promising biomaterials. However, the impact of structural change of side chains on the intrinsic self-assembly property of collagen was always ignored. Here, a series of acrylic acid-grafted-collagen (AA-g-Col) with different grafting density were prepared to explore the impact of side chain structural variation on the self-assembly of collagen. The results showed that excessive grafting density would weaken or even disappear the self-assembly property of AA-g-Col, but only affects the triple helix to a minor extent. Compared to pristine collagen, the mechanical property and cytocompatibility of AA-g-Col based matrices also deteriorated, along with the increase of grafting density. Therefore, this work contributed a new insight into the importance of grafting density for the study of modified collagen, which would be helpful for the design of optimized formulate collagen-based hybrid materials with both additional novel functions and tissue-mimicking fibrillary structures.

Fibril growth kinetics link buffer conditions and topology of 3D collagen I networks

Three-dimensional fibrillar networks reconstituted from collagen I are widely used as biomimetic scaffolds for in vitro and in vivo cell studies. Various physicochemical parameters of buffer conditions for in vitro fibril formation are well known, including pH-value, ion concentrations and temperature. However, there is a lack of a detailed understanding of reconstituting well-defined 3D network topologies, which is required to mimic specific properties of the native extracellular matrix. We screened a wide range of relevant physicochemical buffer conditions and characterized the topology of the reconstituted 3D networks in terms of mean pore size and fibril diameter. A congruent analysis of fibril formation kinetics by turbidimetry revealed the adjustment of the lateral growth phase of fibrils by buffer conditions to be key in the determination of pore size and fibril diameter of the networks. Although the kinetics of nucleation and linear growth phase were affected by buffer conditions as well, network topology was independent of those two growth phases. Overall, the results of our study provide necessary insights into how to engineer 3D collagen matrices with an independent control over topology parameters, in order to mimic in vivo tissues in in vitro experiments and tissue engineering applications.

STATEMENT OF SIGNIFICANCE

The study reports a comprehensive analysis of physicochemical conditions of buffer solutions to reconstitute defined 3D collagen I matrices. By a combined analysis of network topology, i.e., pore size and fibril diameter, and the kinetics of fibril formation we can reveal the dependence of 3D network topology on buffer conditions, such as pH-value, phosphate concentration and sodium chloride content. With those results we are now able to provide engineering strategies to independently tune the topology parameters of widely used 3D collagen scaffolds based on the buffer conditions. By that, we enable the straightforward mimicking of extracellular matrices of in vivo tissues for in vitro cell culture experiments and tissue engineering applications.

Self-assembly of collagen-based biomaterials: preparation, characterizations and biomedical applications

By combining regulatory parameters with characterization methods, researchers can selectively fabricate collagenous biomaterials with various functional responses for biomedical applications.

Macromolecular crowding for tailoring tissue-derived fibrillated matrices

Tissue-derived fibrillated matrices can be instrumental for the in vitro reconstitution of multiphasic extracellular microenvironments. However, despite of several advantages, the obtained scaffolds so far offer a rather narrow range of materials characteristics only. In this work, we demonstrate how macromolecular crowding (MMC) - the supplementation of matrix reconstitution media with synthetic or natural macromolecules in ways to create excluded volume effects (EVE) - can be employed for tailoring important structural and biophysical characteristics of kidney-derived fibrillated matrices. Porcine kidneys were decellularized, ground and the obtained extracellular matrix (ECM) preparations were reconstituted under varied MMC conditions. We show that MMC strongly influences the fibrillogenesis kinetics and impacts the architecture and the elastic modulus of the reconstituted matrices, with diameters and relative alignment of fibrils increasing at elevated concentrations of the crowding agent Ficoll400, a nonionic synthetic polymer of sucrose. Furthermore, we demonstrate how MMC modulates the distribution of key ECM molecules within the reconstituted matrix scaffolds. As a proof of concept, we compared different variants of kidney-derived fibrillated matrices in cell culture experiments referring to specific requirements of kidney tissue engineering approaches. The results revealed that MMC-tailored matrices support the morphogenesis of human umbilical vein endothelial cells (HUVECs) into capillary networks and of murine kidney stem cells (KSCs) into highly branched aggregates. The established methodology is concluded to provide generally applicable new options for tailoring tissue-specific multiphasic matrices in vitro.

STATEMENT OF SIGNIFICANCE

Tissue-derived fibrillated matrices can be instrumental for the in vitro reconstitution of multiphasic extracellular microenvironments. However, despite of several advantages, the obtained scaffolds so far offer a rather narrow range of materials characteristics only. Using the kidney matrix as a model, we herein report a new approach for tailoring tissue-derived fibrillated matrices by means of macromolecular crowding (MMC), the supplementation of reconstitution media with synthetic or natural macromolecules. MMC-modulation of matrix reconstitution is demonstrated to allow for the adjustment of fibrillation kinetics and nano-architecture, fiber diameter, alignment, and matrix elasticity. Primary human umbilical vein endothelial cells (HUVEC) and murine kidney stem cells (KSC) were cultured within different variants of fibrillated kidney matrix scaffolds. The results showed that MMC-tailored matrices were superior in supporting desired morphogenesis phenomena of both cell types.

Impact of Collagen/Heparin Multilayers for Regulating Bone Cellular Functions

Bone cell interaction with extracellular matrix (ECM) microenvironment is of critical importance when engineering surface interfaces for bone regeneration. In this work layer-by-layer films of type I collagen (coll), the major constituent of bone ECM, and heparin (hep), a glycosaminoglycan, were assembled on poly(l-lactic acid) (PLLA) substrates to evaluate the impact of the biomacromolecular coating on cell activity. The surface modification of PLLA demonstrated that the hep/coll multilayer is stable after 10 bilayers (confirmed by contact angle, infrared spectroscopy, and morphological analysis). This simple approach provided novel information on the effect of heparin on type I collagen hierarchical organization and subsequent cell response of osteoblast-like (MC3T3-E1) and human bone marrow-derived mesenchymal stem cells (hMSCs). Interestingly, the number of deposited heparin layers (1 or 10) appeared to play an important role in the self-assembly of collagen into fibrils, stabilizing the fibrous collagen layer, and potentially impacting hMSCs activity.

Characterization of Collagen Type I and II Blended Hydrogels for Articular Cartilage Tissue Engineering

Biomaterials that provide signals present in the native extracellular matrix have been proposed as scaffolds to support improved cartilage regeneration. This study harnesses the biological activity of collagen type II and the superior mechanical properties of collagen type I by characterizing gels made of collagen type I and II blends. The collagen blend hydrogels were able to incorporate both types of collagen and retained chondroitin sulfate and hyaluronic acid. Cryo-scanning electron microscopy images showed that the 3:1 ratio of collagen type I to type II gels had a lower void space percentage (36.4%) than the 1:1 gels (46.5%). The complex modulus was larger for the 3:1 gels (G* = 5.0 Pa) compared to the 1:1 gels (G* = 1.2 Pa). The 3:1 blend consistently formed gels with superior mechanical properties compared to the other blends and has the potential to be implemented as a scaffold for articular cartilage engineering.

Nanoparticles combined with growth factors: recent progress and applications

Increasing attention has been focused on the applications of nanoparticles combined with growth factors (NPs/GFs) due to the substantial functions of GFs in regenerative medicine and disease treatments.

Feasibility study of the natural derived chitosan dialdehyde for chemical modification of collagen

The aim of this study is to evaluate the chemical crosslinking effects of the natural derived chitosan dialdehyde (OCS) on collagen. Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and circular dichroism (CD) measurements suggest that introducing OCS might not destroy the natural triple helix conformation of collagen but enhance the thermal-stability of collagen. Meanwhile, a denser fibrous network of cross-linked collagen is observed by atomic force microscopy. Further, scanning electron microscopy (SEM) and aggregation kinetics analysis confirm that the fibrillation process of collagen advances successfully and OCS could lengthen the completion time of collagen fibrillogenesis but raise the reconstitution rate of collagen fibrils or microfibrils. Besides, the cytocompatibility analysis implies that when the dosage of OCS is less than 15%, introducing OCS into collagen might be favorable for the cell's adhesion, growth and proliferation. Taken as a whole, the present study demonstrates that OCS might be an ideal crosslinker for the chemical fixation of collagen.

Bioinspired Collagen/Glycosaminoglycan-Based Cellular Microenvironments for Tuning Osteoclastogenesis

Replicating the biocomplexity of native extracellular matrices (ECM) is critical for a deeper understanding of biochemical signals influencing bone homeostasis. This will foster the development of bioinspired biomaterials with adjustable bone-inducing properties. Collagen-based coatings containing single HA derivatives have previously been reported to promote osteogenic differentiation and modulate osteoclastogenesis and resorption depending on their sulfation degree. However, the potential impact of different GAG concentrations as well as the interplay of multiple GAGs in these coatings is not characterized in detail to date. These aspects were addressed in the current study by integrating HA and different sulfate-modified HA derivatives (sHA) during collagen in vitro fibrillogenesis. Besides cellular microenvironments with systematically altered single-GAG concentrations, matrices containing both low and high sHA (sHA1, sHA4) were characterized by biochemical analysis such as agarose gel electrophoresis, performed for the first time with sHA derivatives. The morphology and composition of the collagen coatings were altered in a GAG sulfation- and concentration-dependent manner. In multi-GAG microenvironments, atomic force microscopy revealed intermediate collagen fibril structures with thin fibrils and microfibrils. GAG sulfation altered the surface charge of the coatings as demonstrated by ζ-potential measurements revealed for the first time as well. This highlights the prospect of GAG-containing matrices to adjust defined surface charge properties. The sHA4- and the multi-GAG coatings alike significantly enhanced the viability of murine osteoclast-precursor-like RAW264.7 cells. Although in single-GAG matrices there was no dose-dependent effect on cell viability, osteoclastogenesis was significantly suppressed only on sHA4-coatings in a dose-dependent fashion. The multi-GAG coatings led to an antiosteoclastogenic effect in-between those with single-GAGs which cannot simply be attributed to the overall content of sulfate groups. These data suggest that the interplay of sGAGs influences bone cell behavior. Whether these findings translate into favorable biomaterial properties needs to be validated in vivo.

Intense Raman scattering on hybrid Au/Ag nanoplatforms for the distinction of MMP-9-digested collagen type-I fiber detection

Well-ordered Au-nanorod arrays were fabricated using the focused ion beam method (denoted as fibAu_NR). Au or Ag nanoclusters (NCs) of various sizes and dimensions were then deposited on the fibAu_NR arrays using electron beam deposition to improve the surface-enhanced Raman scattering (SERS) effect, which was verified using a low concentration of crystal violet (10(-)(5)M) as the probe molecule. An enhancement factor of 6.92 × 10(8) was obtained for NCsfibAu_NR, which is attributed to the combination of intra-NC and NR localized surface plasmon resonance. When 4-aminobenzenethiol (4-ABT)-coated Au or Ag nanoparticles (NPs) were attached to NCsfibAu_NR, the small gaps between 4-ABT-coated NPs and intra-NCs allowed detection at the single-molecule level. Hotspots formed at the interfaces of NCs/NRs and NPs/NCs at a high density, producing a strong local electromagnetic effect. Raman spectra from as-prepared type I collagen (Col-I) and Ag-NP-coated Col-I fibers on NCsfibAu_NR were compared to determine the quantity of amino acids in their triple helix structure. Various concentrations of matrix-metalloproteinase-9-digested Col-I fibers on NCsfibAu_NR were qualitatively examined at a Raman laser wavelength of 785nm to determine the changes of amino acids in the Col-I fiber structure. The results can be used to monitor the growth of healing Col-I fibers in a micro-environment.

Glycosaminoglycan functionalization of mechanically and topologically defined collagen I matrices

A sequential preparation approach provides the option to functionalize collagen I networks with glycosaminoglycans independently of network topology and mechanics.

Imaging collagen type I fibrillogenesis with high spatiotemporal resolution

Fibrillar collagens, such as collagen type I, belong to the most abundant extracellular matrix proteins and they have received much attention over the last five decades due to their large interactome, complex hierarchical structure and high mechanical stability. Nevertheless, the collagen self-assembly process is still incompletely understood. Determining the real-time kinetics of collagen type I formation is therefore pivotal for better understanding of collagen type I structure and function, but visualising the dynamic self-assembly process of collagen I on the molecular scale requires imaging techniques offering high spatiotemporal resolution. Fast and high-speed scanning atomic force microscopes (AFM) provide the means to study such processes on the timescale of seconds under near-physiological conditions. In this study we have applied fast AFM tip scanning to study the assembly kinetics of fibrillar collagen type I nanomatrices with a temporal resolution reaching eight seconds for a frame size of 500 nm. By modifying the buffer composition and pH value, the kinetics of collagen fibrillogenesis can be adjusted for optimal analysis by fast AFM scanning. We furthermore show that amplitude-modulation imaging can be successfully applied to extract additional structural information from collagen samples even at high scan rates. Fast AFM scanning with controlled amplitude modulation therefore provides a versatile platform for studying dynamic collagen self-assembly processes at high resolution.

Sulfated hyaluronan influences the formation of artificial extracellular matrices and the adhesion of osteogenic cells

The aim of this study is to compare differentially sulfated hyaluronan (sHA) derivatives and chondroitin sulfate (CS) with respect to their ability to influence the formation of artificial extracellular matrices (aECMs) during in vitro-fibrillogenesis of collagen type I at high- and low-ionic strength. Analysis is performed using turbidity, biochemical assays, atomic force (AFM), and transmission electron microscopy (TEM). In general, high-sulfated glycosaminoglycans (GAGs) associate to a higher amount with collagen than the low-sulfated ones. The addition of GAGs prior to fibrillogenesis at low-ionic strength results in a dose-dependent decrease in fibril diameter. At high-ionic strength these effects are only obtained for the sHA derivatives but not for CS. Likewise, increasing concentrations and degree of GAG sulfation strongly affected the kinetics of fibrillogenesis. The impact of sulfation degree on F-actin location and fiber formation in SaOS-2 cells implies that adhesion-related intracellular signaling is influenced to a variable extent.

Heparin modification of a biomimetic bone matrix for controlled release of VEGF

Bone regeneration using tissue engineered constructs requires strategies to effectively stimulate vascularization within such a construct that is crucial for its supply and integration with the host tissue. In this work, porous scaffolds of a collagen/hydroxyapatite nanocomposite were modified with heparin to generate biomimetic bone matrices which are able to release angiogenic factors in a controlled manner. Heparin was either integrated during material synthesis (in situ) or added to the scaffolds after their fabrication (post). Both approaches resulted in stable incorporation of heparin into the matrix of mineralized collagen. Investigations of binding and release of the vascular endothelial growth factor (VEGF-A₁₆₅) loaded onto the scaffolds revealed an enhanced binding capacity as well as a sustained and nearly constant delivery of VEGF as result of both heparin modification methods. The release rate could be controlled by varying the quantity of incorporated heparin and the modification method. Although the biological activity of VEGF released after 7 days from the unmodified scaffolds was reduced in comparison to control VEGF, it was maintained after release from post or even enhanced after release from in situ modified scaffolds. In conclusion, the heparin-modified scaffolds of mineralized collagen exhibited favorable growth factor binding and release properties and may be beneficial to stimulate vascularization.

Collagen-Based Substrates with Tunable Strength for Soft Tissue Engineering

Through the use of mechanical reinforcement of collagen matrices, mechanically strong and compliant 3D tissue mimetic scaffolds can be generated that act as scaffolds for soft tissue engineering. Collagen has been widely used for the development of materials for repair, augmentation or replacement of damaged or diseased tissue. Herein we describe a facile method for the layer-by-layer fabrication of robust planar collagen fiber constructs. Collagen gels cast in a phosphate buffer were dried to form dense collagen mats. Subsequent gels were layered and dried atop mats to create multilayer constructs possessing a range of tunable strengths (0.5 - 11 MPa) and stiffness (1 - 115 MPa). Depending on processing conditions and crosslinking of constructs, strain to failure ranged between 9 to 48%. Collagen mats were constructed into hernia patches that prevented hernia recurrence in Wistar rats.