Studies on lipid production by Rhodotorula glutinis fermentation using monosodium glutamate wastewater as culture medium

Oleaginous fungi: a promising source of biofuels and nutraceuticals with enhanced lipid production strategies

Oleaginous fungi have attracted a great deal of interest for their potency to accumulate high amounts of lipids (more than 20% of biomass dry weight) and polyunsaturated fatty acids (PUFAs), which have a variety of industrial and biological applications. Lipids of plant and animal origin are related to some restrictions and thus lead to attention towards oleaginous microorganisms as reliable substitute resources. Lipids are traditionally biosynthesized intra-cellularly and involved in the building structure of a variety of cellular compartments. In oleaginous fungi, under certain conditions of elevated carbon ratio and decreased nitrogen in the growth medium, a change in metabolic pathway occurred by switching the whole central carbon metabolism to fatty acid anabolism, which subsequently resulted in high lipid accumulation. The present review illustrates the bio-lipid structure, fatty acid classes and biosynthesis within oleaginous fungi with certain key enzymes, and the advantages of oleaginous fungi over other lipid bio-sources. Qualitative and quantitative techniques for detecting the lipid accumulation capability of oleaginous microbes including visual, and analytical (convenient and non-convenient) were debated. Factors affecting lipid production, and different approaches followed to enhance the lipid content in oleaginous yeasts and fungi, including optimization, utilization of cost-effective wastes, co-culturing, as well as metabolic and genetic engineering, were discussed. A better understanding of the oleaginous fungi regarding screening, detection, and maximization of lipid content using different strategies could help to discover new potent oleaginous isolates, exploit and recycle low-cost wastes, and improve the efficiency of bio-lipids cumulation with biotechnological significance.

Thraustochytrids as a promising source of fatty acids, carotenoids, and sterols: bioactive compound biosynthesis, and modern biotechnology

Thraustochytrids are eukaryotes and obligate marine protists. They are increasingly considered to be a promising feed additive because of their superior and sustainable application in the production of health-benefiting bioactive compounds, such as fatty acids, carotenoids, and sterols. Moreover, the increasing demand makes it critical to rationally design the targeted products by engineering industrial strains. In this review, bioactive compounds accumulated in thraustochytrids were comprehensively evaluated according to their chemical structure, properties, and physiological function. Metabolic networks and biosynthetic pathways of fatty acids, carotenoids, and sterols were methodically summarized. Further, stress-based strategies used in thraustochytrids were reviewed to explore the potential methodologies for enhancing specific product yields. There are internal relationships between the biosynthesis of fatty acids, carotenoids, and sterols in thraustochytrids since they share some branches of the synthetic routes with some intermediate substrates in common. Although there are classic synthesis pathways presented in the previous research, the metabolic flow of how these compounds are being synthesized in thraustochytrids still remains uncovered. Further, combined with omics technologies to deeply understand the mechanism and effects of different stresses is necessary, which could provide guidance for genetic engineering. While gene-editing technology has allowed targeted gene knock-in and knock-outs in thraustochytrids, efficient gene editing is still required. This critical review will provide comprehensive information to benefit boosting the commercial productivity of specific bioactive substances by thraustochytrids.

Utilization of olive mill wastewater for selective production of lipids and carotenoids by Rhodotorula glutinis

Olive mill wastewater (OMW) is a zero-cost substrate for numerous value-added compounds. Although several studies on the production of lipids and carotenoids by Rhodotorula glutinis in OMW exist, none of them has specifically focused on the conditions for a target lipid or carotenoid. This study presents cultivation conditions that selectively stimulate the cell biomass, individual carotenoids and lipids. It was found that supplemental carbon and nitrogen sources as well as illumination affected cell biomass the most. High temperature, low initial pH, illumination, lack of urea and presence of glycerol stimulated the lipid synthesis. The highest total lipid content obtained in undiluted OMW supplemented with urea was 11.08 ± 0.17% (w/w) whilst it was 41.40 ± 0.21% (w/w) when supplemented with glycerol. Moreover, the main fatty acid produced by R. glutinis in all media was oleic acid, whose fraction reached 63.94 ± 0.58%. Total carotenoid yield was significantly increased with low initial pH, high temperature, illumination, certain amounts of urea, glycerol and cultivation time. Up to 192.09 ± 0.16 μg/g cell carotenoid yield was achieved. Torularhodin could be selectively produced at high pH, low temperature and with urea and glycerol supplementation. To selectively induce torulene synthesis, cultivation conditions should have low pH, high temperature and illumination. In addition, low pH, high temperature and urea supplementation served high production of β-carotene. Up to 85.40 ± 0.76, 80.67 ± 1.40 and 39.45 ± 0.69% of torulene, torularhodin and β-carotene, respectively, were obtained under selected conditions. KEY POINTS: • Cultivation conditions selectively induced target carotenoids and lipids • 41.40 ± 0.21% (w/w) lipid content and 192.09 ± 0.16 μg/g cell carotenoid yield were achieved • Markedly high selectivity values for torularhodin and torulene were achieved.

Pollutants removal, microbial community shift and oleic acid production in symbiotic microalgae-bacteria system

The functional interaction between microorganisms is key in symbiotic microalga-bacteria systems; however, evaluations of fungi and pathogenic microorganisms are not clear. In this study, the roles of three groups (i.e., microalgae-activated sludge (MAS), Microalgae, and activated sludge) in pollutant removal and biomass recovery were comparatively studied. The data implied that microalgal assimilation and bacterial heterotrophic degradation were the major approaches for degradation of nutrients and organic matter, respectively. According to 16S rRNA and internal transcribed spacer sequencing, the relative abundance of Rhodotorula increased remarkably, favoring nutrient exchange between the microalgae and bacteria. The abundances of two types of pathogenic genes (human pathogens and animal parasites) were reduced in the MAS system. The oleic acid content in the MAS system (51.2 mg/g) was 1.7 times higher than that in the Microalgae system. The results can provide a basis for practical application and resource utilization of symbiotic microalgae-bacteria systems.

Rhodotorula sp.-based biorefinery: a source of valuable biomolecules

The development of an effective, realistic, and sustainable microbial biorefinery depends on several factors, including as one of the key aspects an adequate selection of microbial strain. The oleaginous red yeast Rhodotorula sp. has been studied as one powerful source for a plethora of high added-value biomolecules, such as carotenoids, lipids, and enzymes. Although known for over a century, the use of Rhodotorula sp. as resource for valuable products has not yet commercialized. Current interests for Rhodotorula sp. yeast have sparked from its high nutritional versatility and ability to convert agro-food residues into added-value biomolecules, two attractive characteristics for designing new biorefineries. In addition, as for other yeast-based bioprocesses, the overall process sustainability can be maximized by a proper integration with subsequent downstream processing stages, for example, by using eco-friendly solvents for the recovery of intracellular products from yeast biomass. This review intends to reflect on the current state of the art of microbial bioprocesses using Rhodotorula species. Therefore, we will provide an analysis of bioproduction performance with some insights regarding downstream separation steps for the extraction of high added-value biomolecules (specifically using efficient and sustainable platforms), providing information regarding the potential applications of biomolecules produced by Rhodotorula sp, as well as detailing the strengths and limitations of yeast-based biorefinery approaches. Novel genetic engineering technologies are further discussed, indicating some directions on their possible use for maximizing the potential of Rhodotorula sp. as cell factories. KEY POINTS: • Rhodotorula sp. are valuable source of high value-added compounds. • Potential of employing Rhodotorula sp. in a multiple product biorefinery. • Future perspectives in the biorefining of Rhodotorula sp. were discussed.

Enhancing Red Yeast Biomass Yield and Lipid Biosynthesis by Using Waste Nitrogen Source by Glucose Fed-Batch at Low Temperature

This work reports the effect of simple feeding strategies and temperature to obtain high-cell-density cultures of Rhodotorula glutinis var. rubescens LOCKR13 maximizing the de novo lipid productivity using deproteinated potato wastewater (DPW) as a basic medium. Feeding DPW with glucose enables a high yield of Rhodotorula glutinis var. rubescens LOCKR13 biomass (52 g d.w. L−1) to be obtained. The highest values of lipid accumulation (34.15%, w/w), production (14.68 g L−1) and yield coefficients (YL/S: 0.242 g g−1), and volumetric productivity (PL: 0.1 g L−1 h−1) were reached by the strain in the two-stage fed-batch process at 20 °C. The lipid of yeast biomass was rich in oleic acid (Δ9C18:1) and palmitic acid (C16:0), and the lower temperature of incubation significantly increased the MUFA (especially oleic acid) content. For the first time, a unique set of thermal analyses of the microbial oil was performed. The isotherms of the oxidation kinetics (PDSC) showed that lipids extracted from the biomass of red yeast had high oxidative stability. This feature of the yeast oil can be useful for long-shelf-life food products and can be promising for the production of biodiesel.

Mucor circinelloides: a model organism for oleaginous fungi and its potential applications in bioactive lipid production

Microbial oils have gained massive attention because of their significant role in industrial applications. Currently plants and animals are the chief sources of medically and nutritionally important fatty acids. However, the ever-increasing global demand for polyunsaturated fatty acids (PUFAs) cannot be met by the existing sources. Therefore microbes, especially fungi, represent an important alternative source of microbial oils being investigated. Mucor circinelloides—an oleaginous filamentous fungus, came to the forefront because of its high efficiency in synthesizing and accumulating lipids, like γ-linolenic acid (GLA) in high quantity. Recently, mycelium of M. circinelloides has acquired substantial attraction towards it as it has been suggested as a convenient raw material source for the generation of biodiesel via lipid transformation. Although M. circinelloides accumulates lipids naturally, metabolic engineering is found to be important for substantial increase in their yields. Both modifications of existing pathways and re-formation of biosynthetic pathways in M. circinelloides have shown the potential to improve lipid levels. In this review, recent advances in various important metabolic aspects of M. circinelloides have been discussed. Furthermore, the potential applications of M. circinelloides in the fields of antioxidants, nutraceuticals, bioremediation, ethanol production, and carotenoids like beta carotene and astaxanthin having significant nutritional value are also deliberated.

A novel oleaginous yeast Saccharomyces cerevisiae CU-TPD4 for lipid and biodiesel production

This study reports on the novel Saccharomyces cerevisiae CU-TPD4 that was isolated from coconut waste residues obtained from a coconut factory in Thailand. The CU-TPD4 isolate was confirmed to be a S. cerevisiae by molecular analysis and to be an oleaginous yeast with more than 20% (w/w) of the cell dry weight (CDW) present in the form of lipids. The lipid content and lipid yield of CU-TPD4 (52.96 ± 1.15% of CDW and 1.78 ± 0.06 g/L, respectively) under optimized growth conditions were much higher than those under normal growth conditions (22.65 ± 1.32% of CDW and 1.24 ± 0.12 g/L, respectively). The major fatty acids produced by CU-TPD4 were oleic (C18:1), palmitoleic (C16:1), stearic (C18:0), and palmitic (C16:0) acids. Mathematical estimation of the physical properties of the biodiesel obtained by transesterification of the extracted lipid suggested it was suitable as biodiesel with respect to the ASTM D6751 and EN 14214 international standards. Consequently, S. cerevisiae CU-TPD4 is expected to emerge as a promising alternative for biodiesel production.

Aspergillus caespitosus ASEF14, an oleaginous fungus as a potential candidate for biodiesel production using sago processing wastewater (SWW)

Background

Oleaginous microorganisms are sustainable alternatives for the production of biodiesel. Among them, oleaginous fungi are known for their rapid growth, short life cycles, no light requirement, easy scalability, and the ability to grow in cheap organic resources. Among all the sources used for biodiesel production, industrial wastewater streams have been least explored. We used oleaginous fungi to decontaminate sago processing wastewater and produce biodiesel.

Results

Among the 15 isolates screened for lipid production and starch utilization using the Nile red staining assay and amylase plate screening, three isolates accumulated > 20% (w/w) of their dry cell mass as lipids. The isolate ASEF14 exhibited the highest lipid accumulation (> 40%) and was identified as Aspergillus caespitosus based on the 28S rRNA gene sequencing. The maximum lipid content of 54.4% in synthetic medium (SM) and 37.2% in sago processing wastewater (SWW) was produced by the strain. The Fourier-transform infrared (FTIR) spectroscopy of the fungal oil revealed the presence of functional peaks corresponding to major lipids. Principal component analysis (PCA) of the FTIR data revealed major changes in the fatty acid composition during the transition from the growth phase (Days 1–3) to the lipid accumulation phase (Days 4–7). The fatty acid methyl esters (FAME) analysis of fungal oil from SWW contained 43.82% and 9.62% of saturated and monounsaturated fatty acids, respectively. The composition and percentage of individual FAME derived from SWW were different from SM, indicating the effect of nutrient and fermentation time. The fuel attributes of the SM- and SWW-grown fungal biodiesel (kinematic viscosity, iodine value, cetane number, cloud and pour point, linolenic acid content, FA > 4 double bonds) met international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards. In addition to biodiesel production, the strain removed various contaminants such as total solids (TS), total suspended solids (TSS), total dissolved solids (TDS), dissolved oxygen (DO), chemical oxygen demand (COD), biological oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), and cyanide up to 58.6%, 53.0%, 35.2%, 94.5%, 89.3%, 91.3%, 74.0%, 47.0%, and 53.84%, respectively, from SWW.

Conclusion

These findings suggested that A. caespitosus ASEF14 is a potential candidate with high lipid accumulating ability (37.27%), capable of using SWW as the primary growth medium. The medium and incubation time alter the FAME profile of this fungus. The physical properties of fungal oil were in accordance with the biodiesel standards. Moreover, it decontaminated SWW by reducing several polluting nutrients and toxicants. The fungal biodiesel produced by this cost-effective method could serve as an alternate path to meet global energy demand.

Harvesting of Rhodotorula glutinis via Polyaluminum Chloride or Cationic Polyacrylamide Using the Extended DLVO Theory

Polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM) play a crucial role for separating microorganisms from bulk media. However, the mechanism of adsorption between cells and flocculants remain to be further defined to improve the flocculation efficiency (FE) in extreme conditions. This study conducted the flocculation process of Rhodotorula glutinis induced by PAC and CPAM, firstly. The result demonstrated that CPAM possessed more efficient harvesting ability for R. glutinis compared to PAC. The difference of flocculation capacity was then thermodynamically explained by the extended DLVO (eDLVO) theory; it turned out that the poor harvesting efficiency of PAC was attributed to lacking of binding sites as well as low adsorption force within particles. Based on this, the FE of PAC to R. glutinis was mechanically enhanced to 99.84% from 32.89% with 0.2 g/L CPAM modification at an optimum pH of 9. Also, the paper will play a guiding role in the treatment of inorganic salt ions and organic matters in wastewater.

Conversion of sugar beet residues into lipids by Lipomyces starkeyi for biodiesel production

BACKGROUND

Lipids from oleaginous yeasts emerged as a sustainable alternative to vegetable oils and animal fat to produce biodiesel, the biodegradable and environmentally friendly counterpart of petro-diesel fuel. To develop economically viable microbial processes, the use of residual feedstocks as growth and production substrates is required.

RESULTS

In this work we investigated sugar beet pulp (SBP) and molasses, the main residues of sugar beet processing, as sustainable substrates for the growth and lipid accumulation by the oleaginous yeast Lipomyces starkeyi. We observed that in hydrolysed SBP the yeast cultures reached a limited biomass, cellular lipid content, lipid production and yield (2.5 g/L, 19.2%, 0.5 g/L and 0.08 g/g, respectively). To increase the initial sugar availability, cells were grown in SBP blended with molasses. Under batch cultivation, the cellular lipid content was more than doubled (47.2%) in the presence of 6% molasses. Under pulsed-feeding cultivation, final biomass, cellular lipid content, lipid production and lipid yield were further improved, reaching respectively 20.5 g/L, 49.2%, 9.7 g/L and 0.178 g/g. Finally, we observed that SBP can be used instead of ammonium sulphate to fulfil yeasts nitrogen requirement in molasses-based media for microbial oil production.

CONCLUSIONS

This study demonstrates for the first time that SBP and molasses can be blended to create a feedstock for the sustainable production of lipids by L. starkeyi. The data obtained pave the way to further improve lipid production by designing a fed-batch process in bioreactor.

The strategies to reduce cost and improve productivity in DHA production by Aurantiochytrium sp.: from biochemical to genetic respects

The marine oleaginous protist Aurantiochytrium sp. (Schizochytrium sp.) is a well-known docosahexaenoic acid (DHA) producer and its different DHA products are the ideal substitute for the traditional fish oil resource. However, the cost of the DHA products derived from Aurantiochytrium sp. (Schizochytrium sp.) is still high, limiting their wide applications. In order to reduce the cost or improve the productivity of DHA from the microbial resource, many researches are focusing on exploring the renewable and low-cost materials as feedbacks, and/or the stimulators for biomass and DHA production. In addition, the genetic engineering is also being used in the Aurantiochytrium sp. (Schizochytrium sp.) system for further improvement. These break the bottleneck of the DHA production by Aurantiochytrium sp. (Schizochytrium sp.) in some degree. In this review, the strategies used currently to reduce cost and improve DHA productivity, mainly from the utilizations of low-cost materials and effective stimulators to the genetic engineering perspectives, are summarized, and the availabilities from the cost perspective are also evaluated. This review provides an overview about the strategies to revolve the production cost and yield of the DHA by Aurantiochytrium sp. (Schizochytrium sp.), a theoretical basis for genetic modification of Aurantiochytrium sp. (Schizochytrium sp.), and a practical basis for the development of DHA industry. KEY POINTS : • Utilizations of various low-cost materials for DHA production • Inducing the growth and DHA biosynthesis by the effective stimulators • Reducing cost and improving DHA productivity by genetic modification • The availability from cost perspective is evaluated.

Lipid Production by Rhodotorula glutinis in Continuous Cultivation with a Gravity Sedimentation System

Lipid accumulation is generally believed to be a partially growth-coupled biochemical process that results in differences in lipid content between different cells. To separate lipid-rich cells and increase the cellular biomass in bioreactors during the cultivation of the oleaginous yeasts, a gravity sedimentation system (GSS) is coupled to a bioreactor. The dilution rate (D) and the ratio of the outflow rate from the outlet of the GSS to the inflow rate into the bioreactor (B) were evaluated. The biomass in the bioreactor with GSS increased by 16.3% and 30.6% at D values of 0.05 h-1 (B = 0.25) and 0.02 h-1 (B = 0.5), respectively. Interestingly, cells containing 39.3% lipids were obtained from the outlet of the GSS (D = 0.02 h-1, B = 0.5), and the lipid content increased by 7.8% compared to that of the bioreactor. The results indicated that use of a GSS is a very effective method for increasing the cell concentration and separation of lipid-rich cells.

Marine Protists and Rhodotorula Yeast as Bio-Convertors of Marine Waste into Nutrient-Rich Deposits for Mangrove Ecosystems

This paper represents a comprehensive study of two new thraustochytrids and a marine Rhodotorula red yeast isolated from Australian coastal waters for their abilities to be a potential renewable feedstock for the nutraceutical, food, fishery and bioenergy industries. Mixotrophic growth of these species was assessed in the presence of different carbon sources: glycerol, glucose, fructose, galactose, xylose, and sucrose, starch, cellulose, malt extract, and potato peels. Up to 14g DW/L (4.6gDW/L-day and 2.8gDW/L-day) of biomass were produced by Aurantiochytrium and Thraustochytrium species, respectively. Thraustochytrids biomass contained up to 33% DW of lipids, rich in omega-3 polyunsaturated docosahexaenoic acid (C22:6, 124mg/g DW); up to 10.2mg/gDW of squalene and up to 61μg/gDW of total carotenoids, composed of astaxanthin, canthaxanthin, echinenone, and β-carotene. Along with the accumulation of these added-value chemicals in biomass, thraustochytrid representatives showed the ability to secrete extracellular polysaccharide matrixes containing lipids and proteins. Rhodotorula sp lipids (26% DW) were enriched in palmitic acid (C16:0, 18mg/gDW) and oleic acid (C18:1, 41mg/gDW). Carotenoids (87μg/gDW) were mainly represented by β-carotene (up to 54μg/gDW). Efficient growth on organic and inorganic sources of carbon and nitrogen from natural and anthropogenic wastewater pollutants along with intracellular and extracellular production of valuable nutrients makes the production of valuable chemicals from isolated species economical and sustainable.

Anaerobic treatment of glutamate-rich wastewater in a continuous UASB reactor: Effect of hydraulic retention time and methanogenic degradation pathway

To investigate the anaerobic treatment efficiency and degradation pathways of glutamate-rich wastewater under various hydraulic retention times (HRTs), a lab-scale upflow anaerobic sludge blanket (UASB) reactor was operated continuously for 180 days. Results showed that high chemical oxygen demand (COD) removal efficiencies of 95.5%-96.5% were achieved at HRTs of 4.5 h-6 h with a maximum methane yield of 0.31 L-CH₄/g-COD. When the HRT was shortened to less than 3 h, the removal performance of the reactor declined. There also was an excessive accumulation of volatile fatty acids, which implies that an appropriately small HRT is applicable to the UASB reactor treating glutamate-rich wastewater. Methanogenic degradation of glutamate in the UASB reactor depended on the HRT applied, and the typical methane-producing capability of the sludge at an HRT of 3 h, in descending order, was acetate > glutamate > butyrate > H₂/CO₂ > valerate > propionate. Clostridium and Methanosaeta were predominant in the glutamate-degrading sludge. At least three degradation pathways most likely existed in the UASB reactor, and the pathway via 3-methlaspartate by Clostridium pascui was expected to be dominant.

Modeling and optimization of microbial lipid fermentation from cellulosic ethanol wastewater by Rhodotorula glutinis based on the support vector machine

To establish the models of microbial lipid production from cellulosic ethanol wastewater by R. glutinis, the biomass, lipid yield, and COD removal rate were investigated under different conditions. Subsequently, the genetic algorithm based on SVM was adopted to optimize parameters for obtaining the maximum biomass. The results demonstrated that the initial COD and glucose content had a significant effect on lipids synthesis. Most of the organic matter in the wastewater was consumed with the production of lipid. Compared with BP-ANN, SVM had better fitting and generalization ability for small amount of experimental data. By genetic algorithm optimization based on SVM, the maximum biomass and lipid yield could reach 11.87 g/L and 2.18 g/L, respectively. The results suggest that the SVM model could be used as an effective tool to optimize fermentation conditions.

An Overview of Potential Oleaginous Microorganisms and Their Role in Biodiesel and Omega-3 Fatty Acid-Based Industries

Microorganisms are known to be natural oil producers in their cellular compartments. Microorganisms that accumulate more than 20% w/w of lipids on a cell dry weight basis are considered as oleaginous microorganisms. These are capable of synthesizing vast majority of fatty acids from short hydrocarbonated chain (C6) to long hydrocarbonated chain (C36), which may be saturated (SFA), monounsaturated (MUFA), or polyunsaturated fatty acids (PUFA), depending on the presence and number of double bonds in hydrocarbonated chains. Depending on the fatty acid profile, the oils obtained from oleaginous microorganisms are utilized as feedstock for either biodiesel production or as nutraceuticals. Mainly microalgae, bacteria, and yeasts are involved in the production of biodiesel, whereas thraustochytrids, fungi, and some of the microalgae are well known to be producers of very long-chain PUFA (omega-3 fatty acids). In this review article, the type of oleaginous microorganisms and their expertise in the field of biodiesel or omega-3 fatty acids, advances in metabolic engineering tools for enhanced lipid accumulation, upstream and downstream processing of lipids, including purification of biodiesel and concentration of omega-3 fatty acids are reviewed.

Simultaneous lipid production for biodiesel feedstock and decontamination of sago processing wastewater using Candida tropicalis ASY2

BACKGROUND

Without sufficient alternatives to crude oil, as demand continues to rise, the global economy will undergo a drastic decline as oil prices explode. Dependence on crude oil and growing environmental impairment must eventually be overcome by creating a sustainable and profitable alternative based on renewable and accessible feedstock. One of the promising solutions for the current and near-future is the substitution of fossil fuels with sustainable liquid feedstock for biofuel production. Among the different renewable liquid feedstock's studied, wastewater is the least explored one for biodiesel production. Sago wastewater is the byproduct of the cassava processing industry and has starch content ranging from 4 to 7%. The present investigation was aimed to produce microbial lipids from oleaginous yeast, Candida tropicalis ASY2 for use as biodiesel feedstock and simultaneously decontaminate the sago processing wastewater for reuse. Initial screening of oleaginous yeast to find an efficient amylolytic with maximum lipid productivity resulted in a potent oleaginous yeast strain, C. tropicalis ASY2, that utilizes SWW as a substrate. Shake flask experiments are conducted over a fermentation time of 240 h to determine a suitable fatty acid composition using GC-FID for biodiesel production with simultaneous removal of SWW pollutants using ASY2.

RESULTS

The maximum biomass of 0.021 g L^-1 h^-1 and lipid productivity of 0.010 g L^-1 h^-1 was recorded in SWW with lipid content of 49%. The yeast strain degraded cyanide in SWW (79%) and also removed chemical oxygen demand (COD), biological oxygen demand (BOD), nitrate (NO₃), ammoniacal (NH₄), and phosphate (PO₄) ions (84%, 92%, 100%, 98%, and 85%, respectively). GC-FID analysis of fatty acid methyl esters (FAME) revealed high oleic acid content (41.33%), which is one of the primary fatty acids for biodiesel production.

CONCLUSIONS

It is evident that the present study provides an innovative and ecologically sustainable technology that generates valuable fuel, biodiesel using SWW as a substrate and decontaminates for reuse.

Utilization of Wheat Bran Acid Hydrolysate by Rhodotorula mucilaginosa Y-MG1 for Microbial Lipid Production as Feedstock for Biodiesel Synthesis

The lignocellulosic hydrolysate was used as the fermentation feedstock of Rhodotorula mucilaginosa Y-MG1 for the production of microbial lipids as the potential raw material for biodiesel synthesis. On synthetic media and under nitrogen-limiting condition, the Y-MG1 strain produces 2.13 g/L of lipids corresponding to 32.7% of lipid content. This strain was able to assimilate a wide range of substrates, especially C5 and C6 sugars as well as glycerol and sucrose. Fatty acid composition shows a divergence depending on the nature of used carbon source with a predominance of oleic acid or linoleic acid. An effective hydrolysis process, based on diluted acid treatment, was established for providing the maximum of fermentable sugars from different characterized lignocellulosic wastes. The highest yield of reducing sugars (56.6 g/L) could be achieved when wheat bran was used as the raw material. Hydrolysate detoxification step was not required in this study since the Y-MG1 strain was shown to grow and produce lipids in the presence of inhibitors and without the addition of external elements. Operating by controlled fed-batch fermentation yielded a dry biomass and oil yield of up to 11 g/L and 38.7% (w/w), respectively. The relative fatty acid composition showed the presence of increased levels of monounsaturated (66.8%) and saturated (23.4%) fatty acids in lipids of Y-MG1 grown on wheat bran. The predictive determination of biodiesel properties suggests that this oil may effectively be used for biodiesel production.

Utilization of Clarified Butter Sediment Waste as a Feedstock for Cost-Effective Production of Biodiesel

The rising demand and cost of fossil fuels (diesel and gasoline), together with the need for sustainable, alternative, and renewable energy sources have increased the interest for biomass-based fuels such as biodiesel. Among renewable sources of biofuels, biodiesel is particularly attractive as it can be used in conventional diesel engines without any modification. Oleaginous yeasts are excellent oil producers that can grow easily on various types of hydrophilic and hydrophobic waste streams that are used as feedstock for single cell oils and subsequently biodiesel production. In this study, cultivation of Rhodosporidium kratochvilovae on a hydrophobic waste (clarified butter sediment waste medium (CBM)) resulted in considerably high lipid accumulation (70.74% w/w). Maximum cell dry weight and total lipid production were 15.52 g/L and 10.98 g/L, respectively, following cultivation in CBM for 144 h. Neutral lipids were found to accumulate in the lipid bodies of cells, as visualized by BODIPY staining and fluorescence microscopy. Cells grown in CBM showed large and dispersed lipid droplets in the intracellular compartment. The fatty acid profile of biodiesel obtained after transesterification was analyzed by gas chromatography-mass spectrometry (GC–MS), while its quality was determined to comply with ASTM 6751 and EN 14214 international standards. Hence, clarified sediment waste can be exploited as a cost-effective renewable feedstock for biodiesel production.

Determining intracellular lipid content of different oleaginous yeasts by one simple and accurate Nile Red fluorescent method

A simple and accurate Nile Red fluorescent method was built to evaluate the lipid content of three different oleaginous yeasts by one standard curve. The staining of cells can be observed clearly by laser scanning confocal microscope, showing that Nile Red can enter into the cells of oleaginous yeasts easily. A series of conditions such as pretreating temperature, cell suspension concentration (OD₆₀₀), staining time, Nile Red concentration and the type of suspension solvent were learnt systematically to obtain the optimal process parameters for Nile Red staining. After optimization, the fitting curve of Nile Red fluorescent method was established under suitable conditions (pretreating temperature: 50 °C, OD₆₀₀: 1.0; staining time: 5 mins; Nile Red concentration: 1.0 μg/mL; suspension solvent: PBS) and it had a suitable correlation coefficient (R² = 0.95) for lipid content measurement of different oleaginous yeasts. By this study, the possibility of lipid content determination of different oleaginous yeasts by one fitting curve can be proven and this will improve the efficiency of researches related to microbial lipid production.

Triauxic growth of an oleaginous red yeast Rhodosporidium toruloides on waste 'extract' for enhanced and concomitant lipid and β-carotene production

BACKGROUND

Vegetable 'mandi' (road-side vegetable market) waste was converted to a suitable fermentation medium for cultivation of oleaginous yeast Rhodosporidium toruloides by steaming under pressure. This cultivation medium derived from waste was found to be a comparatively better source of nutrients than standard culture media because it provided more than one type of usable carbon source(s) to yeast.

RESULTS

HPLC results showed that the extract contained glucose, xylose and glycerol along with other carbon sources, allowing triauxic growth pattern with preferably usage of glucose, xylose and glycerol resulting in enhanced growth, lipid and carotenoid production. Presence of saturated and unsaturated fatty acid methyl esters (FAMEs) (C_14-20) in the lipid profile showed that the lipid may be transesterified for biodiesel production.

CONCLUSION

Upscaling these experiments to fermenter scale for the production of lipids and biodiesel and other industrially useful products would lead to waste management along with the production of value added commodities. The technique is thus environment friendly and gives good return upon investment.

Microbial lipid production and organic matters removal from cellulosic ethanol wastewater through coupling oleaginous yeasts and activated sludge biological method

In this paper, a novel strategy for lipid production through coupling oleaginous yeasts and activated sludge biological methods by cultivation of Rhodotorula glutinis in cellulosic ethanol wastewater was studied. Under optimal conditions in wastewater medium (dilution ratio of 1:2 and glucose supplement of 40 g/L), the maximum biomass and lipid content as well as the lipid yield reached 11.31 g/L, 18.35% and 2.08 g/L, with the associated removal rates of COD, TOC, NH₄⁺-N, TN and TP reaching 83.15%, 81.81%, 85.49%, 70.52% and 67.46%, respectively. Cellulosic ethanol wastewater treated by the anaerobic-aerobic biological process resulted in removal of COD, NH₄⁺-N, TP and TN reaching 67.55%, 94.17%, 90.16% and 48.89%, respectively. The reused water was used to dilute medium of R. glutinis for microbial lipid production reaching 2.38 g/L and caused positive effects on the accumulation of biomass and lipid.

Refined soybean oil wastewater treatment and its utilization for lipid production by the oleaginous yeast Trichosporon fermentans

BACKGROUND

The release of refined soybean oil wastewater (RSOW) with a high chemical oxygen demand (COD) and oil content burdens the environment. The conversion of RSOW into lipids by oleaginous yeasts may be a good way to turn this waste into usable products.

RESULTS

The oleaginous yeast Trichosporon fermentans was used for treating the RSOW without sterilization, dilution, or nutrient supplementation. It was found that the COD and oil content of the RSOW were removed effectively; microbial oil was abundantly produced in 48 h; and the phospholipids in the RSOW tended to contribute to a higher biomass and microbial lipid content. With Plackett-Burman design and response surface design experiments, the optimal wastewater treatment conditions were determined: temperature 28.3 °C, amount of inoculum 5.9% (v/v), and initial pH 6.1. The optimized conditions were used in a 5-L bioreactor to treat the RSOW. The maximum COD degradation of 94.7% was obtained within 40 h, and the removal of the oil content was 89.9%. The biomass was 7.9 g/L, the lipid concentration was 3.4 g/L, and the lipid content was 43% (w/w). The microbial oil obtained, with a main component of unsaturated fatty acids, was similar to vegetable oils and was suggested as a potential raw material for biodiesel production.

CONCLUSION

Trichosporon fermentans can be effectively used for RSOW treatment, and lipid production and can complete pretreatment and biochemical treatment simultaneously, allowing the utilization of RSOW, which both solves an environmental problem and positively impacts the use of resources. These results provide valuable information for developing and designing more efficient waste-into-lipid bioprocesses.

Development of a method for the valorization of fermentation wastewater and algal-residue extract in docosahexaenoic acid production by Schizochytrium sp

Fermentation wastewater (FW) and algal residue are major by-products of docosahexaenoic acid (DHA) fermentations utilizing Schizochytrium sp. In order to reduce production costs and environmental pollution, we explored the application of FW and algal-residue extract (AE) for DHA production. Components analysis showed that FW and AE contained some mineral elements and protein residues, respectively. When they were used for DHA fermentation, results showed that 20% replacement of fresh water by FW and 80% replacement of yeast extract nitrogen by AE reached DHA content of 22.23 g/L and 27.10 g/L, respectively. Furthermore, a novel medium that utilizes a mixture of FW and AE was applied for DHA fermentation, whereby the final DHA yield reached 28.45 g/L, 24.56% higher than conventional medium. The strategy of valorizing fermentation waste provides a new method for reducing the costs and reducing environmental pollution of microbial fermentations.

Biodiesels from microbial oils: Opportunity and challenges

Although biodiesel has been extensively explored as an important renewable energy source, the raw materials-associated cost poses a serious challenge on its large-scale commercial production. The first and second generations of biodiesel are mainly produced from usable raw materials, e.g. edible oils, crops etc. Such a situation inevitably imposes higher demands on land and water usage, which in turn compromise future food and water supply. Obviously, there is an urgent need to explore alternative feedstock, e.g. microbial oils which can be produced by many types of microorganisms including microalgae, fungi and bacteria with the advantages of small footprint, high lipid content and efficient uptake of carbon dioxide. Therefore, this review offers a comprehensive picture of microbial oil-based technology for biodiesel production. The perspectives and directions forward are also outlined for future biodiesel production and commercialization.

Lipid accumulation potential of oleaginous yeasts: A comparative evaluation using food waste leachate as a substrate

In present study, the efficiency of three oleaginous yeasts i.e., Yarrowia lipolytica, Rhodotorula glutinis and Cryptococcus curvatus were compared for their lipid assimilation capacities using three different FW-leachates as a medium. The FW-leachates were collected from dry anaerobic digesters and diluted to achieve carbohydrate content of 25gL^-1 prior to yeast inoculations. Around 5% of yeast cultures were individually mixed in three different FW-leachate mediums and incubated under 30°C and 150rpm agitation for 6days. The Y. lipolytica produced high biomass with lipid contents of 49.0±2% on dry weight basis. Whereas, the acetic acid concentration of >6gL^-1 inhibited the growth of R. glutinis. The study observed that the selection of appropriate FW-leachate composition is highly important for biolipid accumulation by oleaginous yeasts.

Lumping kinetics of ABE fermentation wastewater treatment by oleaginous yeast Trichosporon cutaneum

Lumping kinetics models were built for the biological treatment of acetone-butanol-ethanol (ABE) fermentation wastewater by oleaginous yeast Trichosporon cutaneum with different fermentation temperatures. Compared with high temperature (33°C, 306 K) and low temperature (23°C, 296 K), medium temperature (28°C, 301 K) was beneficial for the cell growth and chemical oxygen demand (COD) degradation during the early stage of fermentation but the final yeast biomass and COD removal were influenced little. By lumping method, the materials in the bioconversion network were divided into five lumps (COD, lipid, polysaccharide, other intracellular products, other extracellular products), and the nine rate constants (k₁-k₉) for the models can well explain the bioconversion laws. The Gibbs free energy (G) for this bioconversion was positive, showing that it cannot happen spontaneous, but the existence of yeast can after the chemical equilibrium and make the bioconversion to be possible. Overall, the possibility of using lumping kinetics for elucidating the laws of materials conversion in the biological treatment of ABE fermentation wastewater by T. cutaneum has been initially proved and this method has great potential for further application.

Potential of oleaginous yeast Trichosporon sp., for conversion of sugarcane bagasse hydrolysate into biodiesel

This study reports production of microbial oil from a yeast strain Trichosporon sp., (RW) isolated from decayed wood. Preliminary analysis based on fluorescence microscopy and spectroscopy of Nile red stained yeast cells showed accumulation of lipid globules. The potential of the yeast to produce lipids was evaluated on glucose, glycerol and acid hydrolysate of sugarcane bagasse, where Trichosporon sp. (RW) was found to accumulate 21.45 (59.6%), 18.41 (56%) and 10.25g/l (40.5%) of the lipids after 120h of fermentation at 30°C. FAME analysis of lipids by GC-FID and NMR revealed oleic acid (18:1) as the major constituent, corresponding to 50.05, 46.48 and 54.66% of the accumulated lipids in glucose, glycerol and hydrolysate grown cultures, respectively. Other accumulated lipids included palmitic (16:0), linoleic (18:2) and stearic acids (18:0) in that order. The cetane number of the lipids ranged from 52.39 to 59.57 indicating suitability for biodiesel production.

Combined "de novo" and "ex novo" lipid fermentation in a mix-medium of corncob acid hydrolysate and soybean oil by Trichosporon dermatis

BACKGROUND

Microbial oil is one important bio-product for its important function in energy, chemical, and food industry. Finding suitable substrates is one key issue for its industrial application. Both hydrophilic and hydrophobic substrates can be utilized by oleaginous microorganisms with two different bio-pathways ("de novo" lipid fermentation and "ex novo" lipid fermentation). To date, most of the research on lipid fermentation has focused mainly on only one fermentation pathway and little work was carried out on both "de novo" and "ex novo" lipid fermentation simultaneously; thus, the advantages of both lipid fermentation cannot be fulfilled comprehensively.

RESULTS

In this study, corncob acid hydrolysate with soybean oil was used as a mix-medium for combined "de novo" and "ex novo" lipid fermentation by oleaginous yeast Trichosporon dermatis. Both hydrophilic and hydrophobic substrates (sugars and soybean oil) in the medium can be utilized simultaneously and efficiently by T. dermatis. Different fermentation modes were compared and the batch mode was the most suitable for the combined fermentation. The influence of soybean oil concentration, inoculum size, and initial pH on the lipid fermentation was evaluated and 20 g/L soybean oil, 5% inoculum size, and initial pH 6.0 were suitable for this bioprocess. By this technology, the lipid composition of extracellular hydrophobic substrate (soybean oil) can be modified. Although adding emulsifier showed little beneficial effect on lipid production, it can modify the intracellular lipid composition of T. dermatis.

CONCLUSIONS

The present study proves the potential and possibility of combined "de novo" and "ex novo" lipid fermentation. This technology can use hydrophilic and hydrophobic sustainable bio-resources to generate lipid feedstock for the production of biodiesel or other lipid-based chemical compounds and to treat some special wastes such as oil-containing wastewater.

Recent advances and industrial viewpoint for biological treatment of wastewaters by oleaginous microorganisms

Recently, technology of using oleaginous microorganisms for biological treatment of wastewaters has become one hot topic in biochemical and environmental engineering for its advantages such as easy for operation in basic bioreactor, having potential to produce valuable bio-products, efficient wastewaters treatment in short period, etc. To promote its industrialization, this article provides some comprehensive analysis of this technology such as its advances, issues, and outlook especially from industrial viewpoint. In detail, the types of wastewaters can be treated and the kinds of oleaginous microorganisms used for biological treatment are introduced, the potential of industrial application and issues (relatively low COD removal, low lipid yield, cost of operation, and lack of scale up application) of this technology are presented, and some critical outlook mainly on co-culture method, combination with other treatments, process controlling and adjusting are discussed systematically. By this article, some important information to develop this technology can be obtained.

Hydrolysis treatments of fruit and vegetable waste for production of biofuel precursors

This study investigated hydrolysis approaches for cultivation of the oleaginous red yeast Rhodotorula glutinis for biodiesel production, whilst utilising the residual solids (RS) for biogas production. Macerated fruit and vegetable waste (FVW) (24h-4°C-leachate served as the control, Pcon) was hydrolysed chemically (Chem), thermally (Therm) and using a combined thermo-chemical treatment (T-Chem). All cleared hydrolysates supported growth of R. glutinis, which was nitrogen-limited. T-Chem hydrolysates yielded highest biomass, total fatty acids (TotFA) and RS-derived biogas yields, biomass TotFA failed to meet standards for fuel density and higher heating values, met by the other treatments. Even though Pcon-derived yields were slightly lower, it is recommended for FVW treatment for local biogas and biodiesel production due to energy and environmental impact considerations.

Mechanistically harvesting of Chlorella vulgaris and Rhodotorula glutinis via modified montmorillonoid

In this study, the flocculation process of Chlorella vulgaris and Rhodotorula glutinis induced by inorganic salts modified montmorillonoid was conducted. The maximum flocculation efficiency (FE) of 98.50% for C. vulgaris and 11.83% for R. glutinis were obtained with 4g/L and 5g/L flocculant within the dosage scope of 1-5g/L. The difference of FE was then thermodynamically explained by the extended DLVO theory and the FE of R. glutinis was mechanically enhanced to 90.66% with 0.06g/L cationic polyacrylamide (CPAM) at an optimum pH of 9. After that, aimed to utilize the remainder flocculant capacity, C. vulgaris culture was added to the aggregation of R. glutinis. Fortunately, the coagulation of R. glutinis and C. Vulgaris was achieved with 0.05g/L CPAM and 5g/L flocculant at pH 9 and the FE reached 90.15% and 91.24%, respectively.

The effect of amino acids on lipid production and nutrient removal by Rhodotorula glutinis cultivation in starch wastewater

In this paper, the components of amino acids in mixed starch wastewater (corn steep water/corn gluten water=1/3, v/v) were analyzed by GC-MS. Effects of amino acids on lipid production by Rhodotorula glutinis and COD removal were studied. The results showed that mixed starch wastewater contained 9 kinds of amino acids and these amino acids significantly improved the biomass (13.63g/L), lipid yield (2.48g/L) and COD removal compared to the basic medium (6.23g/L and 1.56g/L). In a 5L fermentor containing mixed starch wastewater as substrate to culture R. glutinis, the maximum biomass, lipid content and lipid yield reached 26.38g/L, 28.90% and 7.62g/L, with the associated removal rates of COD, TN and TP reaching 77.41%, 69.12% and 73.85%, respectively. The results revealed a promising approach for lipid production with using amino acids present in starch wastewater as an alternative nitrogen source.

Technological trends and market perspectives for production of microbial oils rich in omega-3

In recent years, foods that contain omega-3 lipids have emerged as important promoters of human health. These lipids are essential for the functional development of the brain and retina, and reduction of the risk of cardiovascular and Alzheimer's diseases. The global market for omega-3 production, particularly docosahexaenoic acid (DHA), saw a large expansion in the last decade due to the increasing use of this lipid as an important component of infant food formulae and supplements. The production of omega-3 lipids from fish and vegetable oil sources has some drawbacks, such as complex purification procedures, unwanted contamination by marine pollutants, reduction or even extinction of several species of fish, and aspects related to sustainability. A promising alternative system for the production of omega-3 lipids is from microbial metabolism of yeast, fungi, or microalgae. The aim of this review is to discuss the various omega-3 sources in the context of the global demand and market potential for these bioactive compounds. To summarize, it is clear that fish and vegetable oil sources will not be sufficient to meet the future needs of the world population. The biotechnological production of single-cell oil comes as a sustainable alternative capable of supplementing the global demand for omega-3, causing less environmental impact.

Converting paper mill sludge into neutral lipids by oleaginous yeast Cryptococcus vishniaccii for biodiesel production

Paper mill sludge (PMS) was assessed as cheap renewable lignocellulosic biomass for lipid production by the oleaginous yeast Cryptococcus vishniaccii (MTCC 232). The sonicated paper mill sludge extract (PMSE) exhibited enhanced lipid yield and lipid content 7.8±0.57g/l, 53.40% in comparison to 5.5±0.8g/l, 40.44% glucose synthetic medium, respectively. The accumulated triglycerides (TAG) inside the lipid droplets (LDs) were converted to biodiesel by transesterification and thoroughly characterized using GC-MS technique. The fatty acid methyl ester (FAME) profile obtained reveals elevated content of oleic acid followed by palmitic acid, linoleic acid and stearic acid with improved oxidative stability related to biodiesel quality.

Comparative genome analysis of the oleaginous yeast Trichosporon fermentans reveals its potential applications in lipid accumulation

In this work, Trichosporon fermentans CICC 1368, which has been shown to accumulate cellular lipids efficiently using industry-agricultural wastes, was subjected to preliminary genome analysis, yielding a genome size of 31.3 million bases and 12,702 predicted protein-coding genes. Our analysis also showed a high degree of gene duplications and unique genes compared with those observed in other oleaginous yeasts, with 3-4-fold more genes related to fatty acid elongation and degradation compared with those in Rhodosporidium toruloides NP11 and Yarrowia lipolytica CLIB122. Phylogenetic analysis with other oleaginous microbes suggested that the lipogenic capacity of T. fermentans was obtained during evolution after the divergence of genera. Thus, our study provided the first draft genome and comparative analysis of T. fermentans, laying the foundation for its genetic improvement to facilitate cost-effective lipid production.

Rhodotorula glutinis-potential source of lipids, carotenoids, and enzymes for use in industries

Rhodotorula glutinis is capable of synthesizing numerous valuable compounds with a wide industrial usage. Biomass of this yeast constitutes sources of microbiological oils, and the whole pool of fatty acids is dominated by oleic, linoleic, and palmitic acid. Due to its composition, the lipids may be useful as a source for the production of the so-called third-generation biodiesel. These yeasts are also capable of synthesizing carotenoids such as β-carotene, torulene, and torularhodin. Due to their health-promoting characteristics, carotenoids are commonly used in the cosmetic, pharmaceutical, and food industries. They are also used as additives in fodders for livestock, fish, and crustaceans. A significant characteristic of R. glutinis is its capability to produce numerous enzymes, in particular, phenylalanine ammonia lyase (PAL). This enzyme is used in the food industry in the production of l-phenylalanine that constitutes the substrate for the synthesis of aspartame—a sweetener commonly used in the food industry.