Application of bioaugmentation to improve the activated sludge system into the contact oxidation system treating petrochemical wastewater

Sustainable refinery waste management through biotechnological interventions: Health impacts, historical successes, and emerging solutions

In today's highly competitive and interconnected global market, economic achievement and prosperity are essential needs for every individual. However, in recent years, the "science of sustainability" has gained popularity due to mounting evidence of the damaging impacts of environmental issues. Lately, the expansion of petroleum industries and refineries has led to a substantial rise in the production of refinery oily waste. The treatment of such waste presents significant environmental challenges, necessitating the development of sustainable solutions. This review explores the latest advancements in biological processes for treating it, focusing on their efficacy and limitations. These processes are still facing challenges such as slow degradation rates, nutrient availability, and pollutant toxicity, which can hinder efficiency. To address these, efforts are being made to develop more viable biological treatments including exploration of microbial strains, optimizing process conditions, bioreactor systems, and integrating advanced bioremediation techniques. Potential applications of these processes across different contaminated sites are discussed along with commercially available technologies. Drawbacks related to bioprocess scale-up, cost-effectiveness, and regulatory constraints are also addressed. Additionally, it incorporates pertinent case studies that serve as illustrations of successful implementations of biological strategies. Ultimately, this sets the stage for practical bioremediation implementation as a solution for refinery waste management.

Improving microbial activity in high-salt wastewater: A review of innovative approaches

The Zero discharge technology has become an important pathroute for sustainable development of high salt wastewater treatment. However, the cohabitation of organic and inorganic debris can cause serious problems such membrane clogging and the formation of hazardous impurity salts that further restrict the recovery of all salt varieties by evaporating and crystallizing. In highly salinized wastewater, biological treatments offer advantages in terms of cost and sustainability when used as a pre-treatment step to eliminate organic debris. On the other hand, high salinity is always a major obstacle to microbial diversity, abundance, and activity, which can result in low organic matter removal effectiveness or the failure of the microbial treatment system. Biofortification techniques can attenuate the negative effects of salt stress and other unfavourable conditions on microorganisms, while the regulation mechanisms of microbial and community collaboration by fortification methods have been an open question. Therefore, a comprehensive summary of the types, mechanisms, and effects of the major biofortification techniques is proposed. This review dialyzes the characteristics and sources of hypersaline wastewater and the main treatment methods. Then, the mechanisms of microbial salt tolerance are summarized and discussed based on microbial characteristics and the protective effects provided by the processes. Finally, the research and application of the main bioaugmentation methods are developed in detail, describing the characteristics, advantages and disadvantages of the different enhancement methods in their implementation. This review provides a more comprehensive perspective on the future engineering applications of bioaugmentation technology, and explores in depth the possibilities of applying biological methods to high-salinity wastewater treatment.

Enhanced treatment of synthetic wastewater by bioaugmentation with a constructed consortium

Bioaugmentation by adding well-functioning mixed microorganism consortia represents a potentially useful approach to improve contaminant removal in wastewater treatment plants (WWTPs). However, unfavorable environmental conditions (i.e., low temperatures) can severely inhibit microbial activity, drawing our attention to constructing cold-tolerant microorganism preparations and investigating their availability in practical applications. Here we screened four in situ functional isolates from the activated sludge of secondary sedimentation tanks in WWTPs to construct a psychrophilic microbial consortium, which was used to perform bioaugmentation for enhanced removal of nitrogen and phosphorus under low temperatures. The consortium was established by cocultivation of four isolates, characterized by 16 S rRNA as the COD-degrading bacterium Aeromonas sp. Z3, aerobic denitrifying bacterium Acinetobacter sp. HF9, nitrifying bacterium Klebsiella sp. X8, and polyphosphate-accumulating bacterium Pseudomonas sp. PC5 respectively. The microorganism preparation was composed of Z3, HF9, X8, and PC5 under the ratio of 1: 1: 3: 1, which can exert optimal pollutant removal under the conditions of 12 °C, 6.0-9.0 pH, 120-200 r‧min-1, and a dosage of 5% (V/V). A 30-day continuous operation of the bioaugmented and control sequencing batch reactors (SBRs) was investigated, and the bioaugmented SBR showed a shorter start-up stage and a more stable operating situation. Compared to the control SBR, the COD, NH4+-N, TN, and TP removal efficiency of the bioaugmented SBR increased by an average of 7.95%, 9.05%, 9.54%, and 7.45% respectively. The analysis of the microbial community revealed that the introduced isolates were dominant in the activated sludge and that functional taxa such as Proteobacteria, Bacteroidota, and Actinobacteria were further enriched after a period of bioaugmentation. The study provides some basis and guidance for the practical application of how to strengthen the stable operation of WWTPs under low temperatures.

Understanding the impacts of intermittent electro field on the bioelectrochemical aniline degradation system: Performance, microbial community and functional enzyme

On account of the lack of a sustainable electron donor source and the inhibitory effect of aniline on denitrogenation make it tough to achieve simultaneous removal of aniline and nitrogen. Herein, the strategy of adjusting electric field mode was applied to the electro-enhanced sequential batch reactors (E-SBRs: R1 (continuous ON), R2 (2 h-ON/2 h-OFF), R3 (12 h-ON/12 h-OFF), R4 (in the aerobic phase ON), R5 (in the anoxic phase ON)) to treat aniline wastewater. Aniline removal rate reached approximately 99% in the five systems. Decreasing electrical stimulation interval from 12 to 2 h significantly improved the electron utilization efficiency for aniline degradation and nitrogen metabolism. The total nitrogen removal was achieved from 70.31% to 75.63%. Meanwhile, the hydrogenotrophic denitrifiers of Hydrogenophaga, Thauera, and Rhodospirillales, enriched in reactors of minor electrical stimulation interval. Accordingly, the expression of functional enzyme related to electron transport was incremental with the proper electrical stimulation frequency.

The selective and sustainable separation of Cd(II) using C6MImT/[C6MIm]PF6 extractant

Cadmium has been classified as a kind of human carcinogens, and has a strong mobility in the water environment and this can result in serious harm to human health and environmental safety. Here, a new selective and efficient extraction-recovery strategy for Cd purification is provided by using C₆MimT/[C₆Mim]PF₆ as the green extractant. Due to the high compatibility between C₆MimT and [C₆Mim]PF₆, C₆MimT-Cd was efficiently separated from the aqueous phase. When the concentration of Cd(II) was 1000 mg/L, the extraction rate could reached 99.9 %. By comparing [C₆MIm]BF₄ with [C₆MIm]PF₆, the hydrophobicity restrained the ion exchange between cation and Cd and significantly reduced the loss of extractant. The extracted Cd(II) was separated in the form of precipitation after stripping. The extraction system of C₆MimT/[C₆Mim]PF₆ was stable after several extraction-stripping cycles. The extraction of Cd(II) by C₆MimT/[C₆Mim]PF₆ system mainly realized by forming a neutral and extractable cadmium complexes between Cd(II) and thione. Based on the natural complexation mechanism between metal and C₆MImT, Cd exists as obvious competitive advantage in coordination with C₆MimT compare to Pb, Zn, Mg, Cr, Fe. This work overcomes the problems of extractant loss and organic pollution caused by volatile or ion exchange, which can only reduce environmental hazards, but also promote the recovery of cadmium and other valuable resources.

Integrated Photocatalytic Oxidation and Adsorption Approach for the Robust Treatment of Refinery Wastewater Using Hybrid TiO2/AC

This study reports the removal of hydrocarbon (HC) pollutants from petroleum refinery wastewater by integrated photocatalytic oxidation and adsorption using a TiO2/AC hybrid material. The hybrid adsorbent/catalyst was prepared by the impregnation of TiO2 over AC and characterized by FTIR, SEM, EDX, and XRD analyses. Under the optimized reaction conditions of pH 3, 30 °C, and 1000 mg TiO2/AC per 500 mL of sample in 50 min, the integrated photocatalytic oxidation-adsorption achieved a net percentage removal of benzene, toluene, aniline, and naphthalene of 91% from model HC solutions. Under these conditions, for the treatment of real refinery wastewater, TiO2/AC caused a 95% decrease in chemical oxygen demand (COD). The integrated photocatalytic oxidation and adsorption using TiO2/AC showed a clear advantage over the individual adsorption and photocatalytic oxidation using AC and TiO2, whereby about the same level of removal of model HCs and a decrease in the COD of refinery wastewater was attained in 105 min and 90 min, respectively, utilizing larger adsorbent/catalyst dosages. GC-MS analysis revealed that during the integrated process of adsorption-photocatalytic oxidation, all the parent HCs and oxidation byproducts were completely removed from the refinery wastewater. Based on the outstanding performance, cost-effectiveness, and environmental greenness, the newly designed TiO2/AC via the integrated adsorption-photocatalytic oxidation can be counted as an effective alternative route for the large-scale processing of refinery wastewater.

Application of microbial electrochemical technologies for the treatment of petrochemical wastewater with concomitant valuable recovery: A review

Petrochemical industry is one of the major and rapidly growing industry that generates a variety of toxic and recalcitrant organic pollutants as by-products, which are not only harmful to the aquatic animals but also affects human health. The majority of the components of petrochemical wastewater (PW) are carcinogenic, genotoxic and phytotoxic in nature; hence, this complex wastewater generated from different petrochemical processes should be efficiently treated prior to its disposal in natural water bodies. The established technologies like advanced oxidation, membrane bioreactor, electrocoagulation and activated sludge process employed for the treatment of PW are highly energy intensive and incurs high capital and operation cost. Moreover, these technologies are not effective in completely eliminating petroleum hydrocarbons present in PW. Thus, to reduce the energy requirement and also to transform the chemical energy trapped in these organic matters present in this wastewater into bioelectricity and other value-added products, microbial electrochemical technologies (METs) can be efficaciously used, which would also compensate the treatment cost by transforming these pollutants into bioenergy and valuables. In this regard, this review elucidates the feasibility and application of different METs as an appropriate alternative for the treatment of PW. Furthermore, the numerous bottlenecks towards the real-life application and commercialization of pioneering METs have also been articulated.

A Brief Review of the Status of Low-Pressure Membrane Technology Implementation for Petroleum Industry Effluent Treatment

Low-pressure membrane technology (ultrafiltration and microfiltration) has been applied to two key effluents generated by the petroleum industry: produced water (PW) from oil exploration, a significant proportion being generated offshore, and onshore refinery/petrochemical effluent. PW is treated physicochemically to remove the oil prior to discharge, whereas the onshore effluents are often treated biologically to remove both the suspended and dissolved organic fractions. This review examines the efficacy and extent of implementation of membrane technology for these two distinct applications, focusing on data and information pertaining to the treatment of real effluents at large/full scale. Reported data trends from PW membrane filtration reveal that, notwithstanding extensive testing of ceramic membrane material for this duty, the mean fluxes sustained are highly variable and generally insufficiently high for offshore treatment on oil platforms where space is limited. This appears to be associated with the use of polymer for chemically-enhanced enhanced oil recovery, which causes significant membrane fouling impairing membrane permeability. Against this, the application of MBRs to onshore oil effluent treatment is well established, with a relatively narrow range of flux values reported (9−17 L·m−2·h−1) and >80% COD removal. It is concluded that the prospects of MBRs for petroleum industry effluent treatment are more favorable than implementation of membrane filtration for offshore PW treatment.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

A review on percarbonate-based advanced oxidation processes for remediation of organic compounds in water

Sodium percarbonate (SPC) is considered a potential alternative to liquid hydrogen peroxide (H₂O₂) in organic compounds contaminated water/soil remediation due to its regularly, transportable, economical, and eco-friendly features. The solid state of SPC makes it more suitable to remediate actual soil and water with a milder H₂O₂ release rate. Apart from its good oxidative capacity, alkaline SPC can simultaneously remediate acidized solution and soil to the neutral condition. Conventionally, percarbonate-based advanced oxidation process (P-AOPs) system proceed through the catalysis under ultraviolet ray, transition metal ions (i.e., Fe²⁺, Fe³⁺, and V⁴⁺), and nanoscale zero-valent metals (iron, zinc, copper, and nickel). The hydroxyl radical (^•OH), superoxide radical (^•O₂^-), and carbonate radical anion (^•CO₃^-) generated from sodium percarbonate could attack the organic pollutant structure. In this review, we present the advances of P-AOPs in heterogeneous and homogeneous catalytic processes through a wide range of activation methods. This review aims to give an overview of the catalysis and application of P-AOPs for emerging contaminants degradation and act as a guideline of the field advances. Various activation methods of percarbonate are summarized, and the influence factors in the solution matrix such as pH, anions, and cations are thoroughly discussed. Moreover, this review helps to clarify the advantages and shortcomings of P-AOPs in current scientific progress and guide the future practical direction of P-AOPs in sustainable carbon catalysis and green chemistry.

Construction of biotreatment platforms for aromatic hydrocarbons and their future perspectives

Aromatic hydrocarbons (AHCs) are one of the major environmental pollutants introduced from both natural and anthropogenic sources. Many AHCs are well known for their toxic, carcinogenic, and mutagenic impact on human health and ecological systems. Biodegradation is an eco-friendly and cost-effective option as microorganisms (e.g., bacteria, fungi, and algae) can efficiently breakdown or transform such pollutants into less harmful and simple metabolites (e.g., carbon dioxide (aerobic), methane (anaerobic), water, and inorganic salts). This paper is organized to offer a state-of-the-art review on the biodegradation of AHCs (monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs)) and associated mechanisms. The recent progress in biological treatment using suspended and attached growth bioreactors for the biodegradation of AHCs is also discussed. In addition, various substrate growth and inhibition models are introduced along with the key factors governing their biodegradation kinetics. The growth and inhibition models have helped gain a better understanding of substrate inhibition in biodegradation. Techno-economic analysis (TEA) and life cycle assessment (LCA) aspects are also described to assess the technical, economical, and environmental impacts of the biological treatment system.

Simultaneous denitrification and desulfurization-S0 recovery of wastewater in trickling filters by bioaugmentation intervention based on avoiding collapse critical points

In order to better achieve efficiently simultaneous desulfurization and denitrification/S⁰ recovery of wastewater, the intervention of sulfur oxidizing bacteria (SOB) and denitrifying bacteria (DNB) was employed to avoid the collapse critical points (the dramatically decrease of S/N removal efficiency) under the fluctuated load. With the assistance of DNB and SOB, collapse critical point of trickling filter (TF) was delayed from the P₈ (105-114 d) to P₁₀ stage (129-138 d). The treatment efficiency of nitrogen and sulfur was the highest with the S/N ratio of 3:1. The bioaugmentation of DNB and SOB at collapse critical point could effectively regulated collapse situation, which further increased the maximum system utilization/elimination capacity to 4.50 kg S m^-3·h^-1 and 0.90 kg N m^-3·h^-1 (increased by 56.89% and 65.56% in comparison to control). High-throughput sequencing analysis indicated that Proteobacteria (average 78.59%) and Bacteroidetes (average 9.30%) were dominant bacteria in the reactor at all stages. As the reaction proceeds, the microbial community was gradually dominated by some functional genera such as Chryseobacterium (average 2.97%), Halothiobacillus (average 22.71%), Rhodanobacter (average 14.02%), Thiobacillus (average 9.01%), Thiomonas (average 16.70%) and Metallibacterium (average 21.63%), which could remove nitrate or sulfide. Both of Principal Component Analysis (PCA) and Canonical Correlation Analysis (CCA) demonstrated the important role of DNB/SOB during the long-term run in the trickling filters (TFs).

Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

Optimization of biogas yield from lignocellulosic materials with different pretreatment methods: a review

Population increase and industrialization has resulted in high energy demand and consumptions, and presently, fossil fuels are the major source of staple energy, supplying 80% of the entire consumption. This has contributed immensely to the greenhouse gas emission and leading to global warming, and as a result of this, there is a tremendous urgency to investigate and improve fresh and renewable energy sources worldwide. One of such renewable energy sources is biogas that is generated by anaerobic fermentation that uses different wastes such as agricultural residues, animal manure, and other organic wastes. During anaerobic digestion, hydrolysis of substrates is regarded as the most crucial stage in the process of biogas generation. However, this process is not always efficient because of the domineering stableness of substrates to enzymatic or bacteria assaults, but substrates' pretreatment before biogas production will enhance biogas production. The principal objective of pretreatments is to ease the accessibility of the enzymes to the lignin, cellulose, and hemicellulose which leads to degradation of the substrates. Hence, the use of pretreatment for catalysis of lignocellulose substrates is beneficial for the production of cost-efficient and eco-friendly process. In this review, we discussed different pretreatment technologies of hydrolysis and their restrictions. The review has shown that different pretreatments have varying effects on lignin, cellulose, and hemicellulose degradation and biogas yield of different substrate and the choice of pretreatment technique will devolve on the intending final products of the process.

Genomic and functional potential of the immobilized microbial consortium MCSt-1 for wastewater treatment

Treatment of wastewater prior to release in water bodies is an imperative need of the current time to address the global water crises. Thus, consortium MCSt-1 was designed for an effective wastewater treatment based on its cellulolytic, proteolytic, lipolytic, phenol and sodium dodecyl sulfate degrading activities along with effective nutrient removal capacity. Performance of the designed consortium was assayed using two differently configured lab-scale bioreactors as subjected to immobilization on two different matrices (pebbles and nylon mesh). Consortium MCSt-1 proficiently removes soluble chemical oxygen demand, nitrate, ammonia and phosphorus with 83%, 67%, 76%, and 62% removal efficiency, respectively. The immobilization on a mesh is recommended as it exhibited better biofilm formation, hence results in significant organic load and nutrient removal. The functional potential of the consortium MCSt-1 explored through genome characterization and reveal the presence of genes responsible for phosphorus metabolism and removal (pst operon and ppk), ammonia assimilation (amt), and nitrate; nitrite reductase (nar, nir, nor). Additionally, consortium members also annotated with the phenol, catechol and benzoate degradation, stress response, heavy metal and antibiotics resistance genes. Hence, the designed consortium MCSt-1 can withstand the harsh condition of treatment plants and serves as the best solution for enhancing wastewater treatment efficiency.

New benzo(a)pyrene-degrading strains of the Burkholderia cepacia complex prospected from activated sludge in a petrochemical wastewater treatment plant

The prospection of bacteria that are resistant to polyaromatic hydrocarbons (PAH) of activated sludge from a Petrochemical Wastewater Treatment Plant (WWTP) allows investigating potential biodegraders of PAH. For this purpose, sludge samples were cultured with benzo(a)pyrene and/or naphthalene as carbon sources. The recovered isolates were characterized by biochemical methods and identified based on the analysis of the sequence of three genes: 16S, recA and gyrB. The isolated strains were shown to be capable of producing surfactants, which are important for compound degradation. The ability to reduce benzo(a)pyrene in vitro was tested by gas chromatography. After 20 days of experiment, the consortium that was enriched with 1 mg/L of benzo(a)pyrene was able to reduce 30% of the compound when compared to a control without bacteria. The four isolated strains that significantly reduced benzo(a)pyrene belong to the Burkholderia cepacia complex and were identified within the consortium as the species B. cenocepacia IIIa, B. vietnamiensis, B. cepacia, and B. multivorans. This finding demonstrates the biotechnological potential of the B. cepacia complex strains for use in wastewater treatment and bioremediation. Previous studies on hydrocarbon-degrading strains focused mainly on contaminated soil or marine areas. In this work, the strains were prospected from activated sludge in a WWTP and showed the potential of indigenous samples to be used in both improving treatment systems and bioremediation of areas contaminated with petrochemical waste.

Bio-Hydrogen Production from Wastewater: A Comparative Study of Low Energy Intensive Production Processes

Billions of litres of wastewater are produced daily from domestic and industrial areas, and whilst wastewater is often perceived as a problem, it has the potential to be viewed as a rich source for resources and energy. Wastewater contains between four and five times more energy than is required to treat it, and is a potential source of bio-hydrogen—a clean energy vector, a feedstock chemical and a fuel, widely recognised to have a role in the decarbonisation of the future energy system. This paper investigates sustainable, low-energy intensive routes for hydrogen production from wastewater, critically analysing five technologies, namely photo-fermentation, dark fermentation, photocatalysis, microbial photo electrochemical processes and microbial electrolysis cells (MECs). The paper compares key parameters influencing H2 production yield, such as pH, temperature and reactor design, summarises the state of the art in each area, and highlights the scale-up technical challenges. In addition to H2 production, these processes can be used for partial wastewater remediation, providing at least 45% reduction in chemical oxygen demand (COD), and are suitable for integration into existing wastewater treatment plants. Key advancements in lab-based research are included, highlighting the potential for each technology to contribute to the development of clean energy. Whilst there have been efforts to scale dark fermentation, electro and photo chemical technologies are still at the early stages of development (Technology Readiness Levels below 4); therefore, pilot plants and demonstrators sited at wastewater treatment facilities are needed to assess commercial viability. As such, a multidisciplinary approach is needed to overcome the current barriers to implementation, integrating expertise in engineering, chemistry and microbiology with the commercial experience of both water and energy sectors. The review concludes by highlighting MECs as a promising technology, due to excellent system modularity, good hydrogen yield (3.6–7.9 L/L/d from synthetic wastewater) and the potential to remove up to 80% COD from influent streams.

Treatment of wastewater containing oil and grease by biological method- a review

One of the complex environmental problems that triggers at present is oily wastewater contamination arising out of the activities related to engineering vehicular (automobile) workshop or garage, kitchens in houses and restaurants, gas stations, metal finishing house, petrochemical industry, edible oil production unit etc. Oily wastewater discharge is a major issue of environmental pollution in the present decade as some of its constituents are hazardous in nature. Hence, appropriate treatment technology for oily wastewater needs to be addressed. Biological treatment (BT) technique would be the best option in this regard, because it has multiple advantages over various other techniques as available today. BT degrades effectively the harmful constituents of oily wastewater into innocuous products that are environment friendly and it is considered to be the economical method. The resulting effluent of pretreatment followed by biological treatment of oily wastewater can be reused after conforming discharge limits. Again, numerous research works in these days have optimized the function and result of existing laboratory and pilot scale treatment technologies. This review paper describes a comprehensive understanding of the origin and characteristics, existing techniques in laboratory and pilot scale, screening of different methods, justification for advocating biological methods for treatment of oily wastewater.

Influences of coagulation pretreatment on the characteristics of crude oil electric desalting wastewaters

Highly polluted crude oil electric desalting wastewaters (EDWs) severely affect the efficiency of refinery wastewater treatment plants (WWTPs). Coagulation is an efficient pretreatment to reduce the impacts of EDWs. In the present study, the influences of coagulation pretreatment on the characteristics of EDWs of three typical Chinese crude oils, Liaohe heavy oil (LHO), Karamay heavy oil (KHO) and Daqing light oil (DLO), were investigated. The stability of three raw EDWs was broken and the contents of organic pollutants were significantly reduced by aluminum sulfate coagulation. More soluble COD and polar oils were removed from LHO-EDW (1241 and 98 mg L^-1) and KHO-EDW (779 and 57 mg L^-1) compared to DLO-EDW (417 and 11 mg L^-1). Coagulation significantly changed the compositions of the organic pollutants of two heavy oil EDWs; however, slightly influenced DLO-EDW, particularly the polar organic pollutants. Most types of aromatic compounds, aliphatic acids and O_x polar compounds were removed from two heavy oil EDWs, but mainly alkanes were removed from DLO-EDW. As such, the differences in the types of dominant polar compounds became insignificant among treated heavy oil and light oil EDWs. Coagulation notably decreased the acute biotoxicity and improved the biodegradability of all treated EDWs. The residual organic nitrogen compounds in treated KHO-EDW contributed to a higher residual biotoxicity compared to treated LHO-EDW. The results demonstrate that coagulation can effectively improve the qualities of heavy oil EDWs by lowering the contents of organic pollutants and removing recalcitrant compounds, thus guaranteeing the efficiency of refinery WWTPs.

Photocatalytic oxidative degradation of hydrocarbon pollutants in refinery wastewater using TiO2 as catalyst

This study reports the photocatalytic oxidative degradation of hydrocarbon pollutants present in refinery wastewater under UV light using Fe₂ O₃ , MnO₂ , TiO₂ , and ZnO as catalysts. Among the catalysts, TiO₂ exhibited the highest photocatalytic degradation activity, that is, 92, 98.8, 91.5, and 93% conversion for benzene, toluene, phenol, and naphthalene, respectively, in the model refinery wastewater under the optimum reaction conditions of pH 3, 30°C, 90-min reaction time, and 100 mg/L catalyst dose. The photocatalytic degradation of a real refinery wastewater sample containing 69.23% aliphatics, 25.36% aromatics, 3.2% oxygenates, and 2.21% naphthenic hydrocarbons under the optimum conditions revealed a net decrease in chemical oxygen demand (93.2%), that is, from 970 mg/L to 65 mg/L. GC-MS analysis of the reaction products confirmed that using UV/TiO₂ system, complete photodegradation of the parent hydrocarbons occurred, but some oxygenated byproducts were also observed. This study provides useful reference information for the treatment of wastewater from oil refineries to cope with the increasing environmental issues. PRACTITIONER POINTS: Benzene, toluene, phenol and naphthalene were successfully degraded by UV/TiO₂ system, under 30°C, 1 hr, pH 3 and 100 mg catalyst. Photocatalytic oxidation of Refinery wastewater (Attock Oil refinery, Pakistan), UV/ TiO₂ system resulted in 93.92% COD removal. GC-MS analysis shows complete removal of parent hydrocarbons from refinery wastewater, leaving only traces of oxygenated hydrocarbons as oxidation byproducts.

Crude oil pollution and biodegradation at the Persian Gulf: A comprehensive and review study

The Persian Gulf consider as the fundamental biological marine condition between the seas. There is a different assortment of marine life forms including corals, wipes, and fish in this marine condition. Mangrove timberlands are found all through this sea-going biological system. Sullying of the Persian Gulf to oil-based goods is the principle of danger to this marine condition and this contamination can effectively affect this differing marine condition. Numerous specialists examined the result of oil contamination on Persian Gulf marine creatures including corals sponges, bivalves, and fishes. These analysts affirmed this oil contamination on the Persian Gulf significantly diminished biodiversity. Diverse microorganisms fit to consume oil-based commodities detailed by various scientists from the Persian Gulf and their capacity to the debasement of unrefined petroleum has been examined. There has additionally been little exploration of cyanobacteria, yeast, and unrefined petroleum debasing organisms in this sea-going environment. Biosurfactants are amphipathic molecules that upgrade the disintegration of oil and increment their bioavailability to corrupt microscopic organisms. Additionally, biosurfactant-producing bacteria were discovered from the Persian Gulf, and the capability to degradation of crude oil in microscale was evaluated. The current review article aims to collect the finding of various researches performed in the Persian Gulf on oil pollution and crude-oil biodegradation. It is expected that by applying biological methods in combination with mechanical and chemical methods, the hazard consequences of crude-oil contamination on this important aquatic ecosystem at the world will be mitigated and a step towards preserving this diverse marine environment.

A review on treatment of petroleum refinery and petrochemical plant wastewater: A special emphasis on constructed wetlands

Petroleum refinery and petrochemical plants (PRPP) are one of the major contributors to toxic and recalcitrant organic polluted water, which has become a significant concern in the field of environmental engineering. Several contaminants of PRPP wastewater are genotoxic, phytotoxic, and carcinogenic, thereby imposing detrimental effects on the environment. Many biological processes were able to achieve chemical oxygen demand (COD) removal ranging from 60% to 90%, and their retention time usually ranged from 10 to 100 days. These methods were not efficient in removing the petroleum hydrocarbons present in PRPP wastewater and produced a significant amount of oily sludge. Advanced oxidation processes achieved the same COD removal efficiency in a few hours and were able to break down recalcitrant organic compounds. However, the associated high cost is a significant drawback concerning PRPP wastewater treatment. In this context, constructed wetlands (CWs) could effectively remove the recalcitrant organic fraction of the wastewater because of the various inherent mechanisms involved, such as phytodegradation, rhizofiltration, microbial degradation, sorption, etc. In this review, we found that CWs were efficient in handling large quantities of high strength PRPP wastewater exhibiting average COD removal of around 80%. Horizontal subsurface flow CWs exhibited better performance than the free surface and floating CWs. These systems could also effectively remove heavy oil and recalcitrant organic compounds, with an average removal efficiency exceeding 80% and 90%, respectively. Furthermore, modifications by varying the aeration system, purposeful hybridization, and identifying the suitable substrate led to the enhanced performance of the systems.

Immobilized-microbial bioaugmentation protects aerobic denitrification from heavy metal shock in an activated-sludge reactor

The inhibition of denitrification by heavy metals is a problem in nitrogen wastewater treatment, but the solutions are rarely studied. In this study, Pseudomonas brassicacearum LZ-4, immobilized in sodium alginate-kaolin, was applied in an activated-sludge reactor to protect denitrifiers from hexavalent chromium (Cr(VI)). Q-PCR result showed that the strain LZ-4 was incorporated into activated sludge under the help of immobilization. In the non-bioaugmentation system, the removal efficiency of nitrate was decreased by 86.07% by 30 mg/L Cr(VI). Whereas, denitrification was protected and 95% of nitrate was removed continuously in immobilized-cell bioaugmentation system. Miseq sequencing data showed that bioaugmentation decreased the impact of Cr(VI) on microbial communities and increased the abundance of denitrifiers. Based on the results of biomass and extracellular polymers, activated sludge was protected from Cr(VI) toxicity. This discovery will provide a feasible technique for nitrogen wastewater treatment in the presence of distressing heavy metals.

Enhanced Degradation of Naproxen by Immobilization of Bacillus thuringiensis B1(2015b) on Loofah Sponge

The naproxen-degrading bacterium Bacillus thuringiensis B1(2015b) was immobilised onto loofah sponge and introduced into lab-scale trickling filters. The trickling filters constructed for this study additionally contained stabilised microflora from a functioning wastewater treatment plant to assess the behavior of introduced immobilized biocatalyst in a fully functioning bioremediation system. The immobilised cells degraded naproxen (1 mg/L) faster in the presence of autochthonous microflora than in a monoculture trickling filter. There was also abundant colonization of the loofah sponges by the microorganisms from the system. Analysis of the influence of an acute, short-term naproxen exposure on the indigenous community revealed a significant drop in its diversity and qualitative composition. Bioaugmentation was also not neutral to the microflora. Introducing a new microorganism and increasing the removal of the pollutant caused changes in the microbial community structure and species composition. The incorporation of the immobilised B1(2015b) was successful and the introduced strain colonized the basic carrier in the trickling filter after the complete biodegradation of the naproxen. As a result, the bioremediation system could potentially be used to biodegrade naproxen in the future.

Selecting Bacteria Candidates for the Bioaugmentation of Activated Sludge to Improve the Aerobic Treatment of Landfill Leachate

In this study, a multifaceted approach for selecting the suitable candidates for bioaugmentation of activated sludge (AS) that supports leachate treatment was used. To determine the exploitation of 10 bacterial strains isolated from the various matrices for inoculating the AS contaminated with the Kalina pond leachate (KPL), their degradative potential was analyzed along with their aptitude to synthesize compounds improving remediation of pollutants in wastewater and ability to incorporate into the AS flocs. Based on their capability to degrade aromatic compounds (primarily catechol, phenol, and cresols) at a concentration of 1 mg/mL and survive in 12.5% of the KPL, Pseudomonas putida OR45a and P. putida KB3 can be considered to be the best candidates for bioaugmentation of the AS among all of the bacteria tested. Genomic analyses of these two strains revealed the presence of the genes encoding enzymes related to the metabolism of aromatic compounds. Additionally, both microorganisms exhibited a high hydrophobic propensity (above 50%) and an ability to produce biosurfactants as well as high resistance to ammonium (above 600 µg/mL) and heavy metals (especially chromium). These properties enable the exploitation of both bacterial strains in the bioremediation of the AS contaminated with the KPL.

Combining hydrological investigations and radium isotopes to understand the environmental effect of groundwater discharge to a typical urbanized estuary in China

Pollution of urbanized rivers with excess nutrients due to groundwater discharge is an increasing environmental concern worldwide. Dan'ao river, a typical urbanized river in the Guangdong-Hong Kong-Macao Greater Bay Area, is experiencing heavy water pollution. However, the groundwater-derived nutrient loads had not yet been thoroughly quantified. In order to quantify the contribution of groundwater-derived nutrient inputs, we combined the methods of hydrological investigations and radium isotopes. Groundwater and river water samples were collected from the river upstream to the estuary for the analyses of radium quartets and nutrients including DIN, DIP and DSi. The results showed that the radium activities in both surface water and groundwater decreased from the estuary to the upstream. The groundwater discharge rate was estimated by the radium mass balance model using short-lived radium isotopes (²²³Ra and ²²⁴Ra). The estimated groundwater discharge rate ranged from 1.99 × 10⁵ to 6.67 × 10⁵ m³ d^-1, comparable to the upstream river discharge rate of 4.23 × 10⁵ m³ d^-1. The groundwater-derived nutrient fluxes were 165.66-554.98 mmol m^-2 d^-1 for DIN, 2.47-8.26 mmol m^-2 d^-1 for DIP and 63.73-213.49 mmol m^-2 d^-1 for DSi, respectively. They contributed 19%~44% DIN, 16%~39% DIP, and 31%~60% DSi of all the nutrient inputs into the Dan'ao River, respectively. In addition, the nutrient inputs by groundwater discharge has an average DIN:DIP ratio of as high as 190, which is able to potentially affect the riverine and marine nutrient structures. These findings may provide useful information for designing control strategies for reducing massive nutrient inputs to Dan'ao River in the future.

Assessing the efficiency in assisted depuration of coffee processing wastewater from mixed wild microbial selected inoculum

This work evaluated the efficiency of bacterial bio-augmentation to the biological treatment of coffee processing wastewater (CPWW) in a pilot wastewater treatment plant (WTP). Biochemical oxygen demand (BOD) and chemical oxygen demand (COD) values were the basis for the treatment efficiency. Serratia marcescens CCMA 1010 and CCMA 1013, Corynebacterium flavescens CCMA 1006 and Acetobacter indonesiensis CCMA 1002 were previously selected. The microbial cocktail was inoculated and persisted in CPWW during all treatments. The richness of wild species was a little altered over time and up to nine species were found in each sampled season. The microbiota composition presented variation of a total of 13 species, despite the inoculation of the microbial inoculum. The biodegradability index of effluent, close to 0.5, was favourable to biological treatment. The pollution parameters of CPWW were decreased in function of the variation of community composition and microbial activity. The greatest reduction of BOD (~ 33%) and COD (~ 25%) was observed between 72 h and 8 days of the biological treatment. The CPWW toxicity in Allium cepa seeds was lower by up to 60%, and the germination index (GI) exceeded 100% in the treated CPWW. The results of the CPWW biological treatment by bio-augmentation from native micro-organisms in the pilot-scale WTP indicated the greatest efficiency relating to the spontaneous biological treatment of CPWW. After this treatment, the discharge of effluent in the environment would not have toxic effects on the plants.

Pilot-scale experiments on multilevel contact oxidation treatment of poultry farm wastewater using saran lock carriers under different operation model

A pilot-scale multilevel contact oxidation reactors system, coupled with saran lock carriers, was applied for the treatment of poultry farm wastewater. The removal efficiencies of COD_cr, ammonia, and the total nitrogen as well as the elimination performance of COD_cr and total nitrogen along the three-level contact oxidation tanks under six designed operational models were investigated. Based on the performance of the nitrogen removal of the saran lock carriers and the distribution of anoxic-aerobic interspace under the suitable operation model, the mechanism of nitrogen removal of the system was also explored. The results revealed that the intermittent aeration under parallel model is the most suitable operation model, while the removal efficiencies of COD_cr, ammonia, and the total nitrogen were 86.86%, 84.04%, and 80.96%, respectively. The effluent concentration of COD_cr, ammonia, and the total nitrogen were 55.6 mg/L, 8.3 mg/L, and 12.0 mg/L, which satisfy both the discharge standard of pollutants for livestock and poultry breeding industry (GB 18596-2001) and the first grade of the integrated wastewater discharge standard (GB 8978-1996). Moreover, the mechanism for the nitrogen removal should be attributed to the plenty of anoxic-aerobic interspaces of the biofilm and the three-dimensional spiral structure of the saran lock carriers, where the oxygen-deficient distribution was suitable for the happening of the simultaneous nitrification and denitrification process. Therefore, the multilevel contact oxidation tanks system is an effective pathway for the treatment of the poultry farm wastewater on the strength of a suitable operation model and novel carriers.

Bioaugmentation of membrane bioreactor with Achromobacter denitrificans strain PR1 for enhanced sulfamethoxazole removal in wastewater

Achromobacter denitrificans strain PR1, previously found to harbour specific degradation pathways with high sulfamethoxazole (SMX) degradation rates, was bioaugmented into laboratory-scale membrane bioreactors (MBRs) operated under aerobic conditions to treat SMX-containing real domestic wastewater. Different hydraulic retention times (HRTs), which is related to reaction time and loading rates, were considered and found to affect the SMX removal efficiency. The availability of primary substrates was important in both bioaugmented and non-bioaugmented activated sludge (AS) for cometabolism of SMX. High HRT (24 h) resulted in low food to microorganism ratio (F/M) and low SMX removal, due to substrate limitation. Decrease in HRT from 24 h to 12 h, 6 h and finally 4 h led to gradual increases in primary substrates availability, e.g. organic compounds and ammonia, resulted in increased SMX removal efficiency and degradation rate, and is more favorable for high-rate wastewater treatment processes. After inoculation into the MBRs, the bioaugmentation strain was sustained in the reactor for a maximum of 31 days even though a significant decrease in abundance was observed. The bioaugmented MBRs showed enhanced SMX removal, especially under SMX shock loads compared to the control MBRs. The results of this study indicate that re-inoculation is required regularly after a period of time to maintain the removal efficiency of the target compound.

Using nano-attapulgite clay compounded hydrophilic urethane foams (AT/HUFs) as biofilm support enhances oil-refinery wastewater treatment in a biofilm membrane bioreactor

Petroleum refinery wastewater (PRW) treatments based on biofilm membrane bioreactor (BF-MBR) technology is an ideal approach and biofilm supporting material is a critical factor. In this study, BF-MBR with nano-attapulgite clay compounded hydrophilic urethane foams (AT/HUFs) as a biofilm support was used to treat PRW with a hydraulic retention time of 5 h. The removal rate of 500 mg/L chemical oxygen demand (COD), 15 mg/L NH₄⁺ and 180 NTU of turbidity were 99.73%, 97.48% and 99.99%, which were 23%, 20%, and 6% higher than in the control bioreactor, respectively. These results were comparatively higher than that observed for the sequencing batch reactor (SBR). The death rate of the Spirodela polyrrhiza (L.) irrigated with BF-MBR-treated water was 4.44%, which was similar to that of the plants irrigated with tap water (3.33%) and SBR-treated water (5.56%), but significantly lower than that irrigated with raw water (84.44%). The counts demonstrated by qPCR for total bacteria, denitrifiers, nitrite oxidizing bacteria, ammonia oxidizing bacteria, and ammonia-oxidizing archaea were also higher in BF-MBR than those obtained by SBR. Moreover, the results of 16 s rRNA sequencing have demonstrated that the wastewater remediation microbes were enriched in AT/HUFs, e.g., Acidovorax can degrade polycyclic aromatic hydrocarbons, and Sulfuritalea is an efficient nitrite degrader. In summary, BF-MBR using AT/HUF as a biofilm support improves microbiome of the actived sludge and is reliable for oil-refinery wastewater treatment.

Characterization of aerobic granular sludge used for the treatment of petroleum wastewater

The application of aerobic granular sludge (AGS) is a promising biological method for wastewater treatment. In the present study, the AGS method was used for the treatment of petroleum wastewater. The granulation process and organic/nitrogen compound removal efficiencies were determined and correlated with the microbiological communities. Granulation of the aerobic sludge occurred after 35 days of operation. The compacted granules had a diameter of 0.46-0.9 mm. Extracellular polymeric substances (EPS) contents increased as granulation progressed and reached 128 mg/g·VSS. The granulated sludge efficiently reduced COD by 95% and petroleum compound contents by 90%. NH₄⁺-N and TN removal were inefficient due to the inhibition of nitrobacteria and denitrificans, but were significantly improved by the addition of glucose. The microorganisms in the granules capable of degrading petroleum chemicals consisted of the genera Propioniciclava, Micropruina, Alphaproteobacteria, Flavobacterium, and Sulfuritalea.

Biogas production from different lignocellulosic biomass sources: advances and perspectives

The present work summarizes different sources of biomass used as raw material for the production of biogas, focusing mainly on the use of plants that do not compete with the food supply. Biogas obtained from edible plants entails a developed technology and good yield of methane production; however, its use may not be sustainable. Biomass from agricultural waste is a cheap option, but in general, with lower methane yields than those obtained from edible plants. On the other hand, the use of algae or aquatic plants promises to be an efficient and sustainable option with high yields of methane produced, but it necessary to overcome the existing technological barriers. Moreover, these last raw materials have the additional advantage that they can be obtained from wastewater treatment and, therefore, they could be applied to the concept of biorefinery. An estimation of methane yield per hectare per year of the some types of biomass and operational conditions employed is presented as well. In addition, different strategies to improve the yield of biogas, such as physical, chemical, and biological pretreatments, are presented. Other alternatives for enhanced the biogas production such as bioaugmentation and biohythane are showed and finally perspectives are mentioned.

Biochemical pathways and enhanced degradation of di-n-octyl phthalate (DOP) in sequencing batch reactor (SBR) by Arthrobacter sp. SLG-4 and Rhodococcus sp. SLG-6 isolated from activated sludge

Two bacterial strains designated as Arthrobacter sp. SLG-4 and Rhodococcus sp. SLG-6, capable of utilizing di-n-octyl phthalate (DOP) as sole source of carbon and energy, were isolated from activated sludge. The analysis of DOP degradation intermediates indicated Arthrobacter sp. SLG-4 could completely degrade DOP. Whereas DOP could not be mineralized by Rhodococcus sp. SLG-6 and the final metabolic product was phthalic acid (PA). The proposed DOP degradation pathway by Arthrobacter sp. SLG-4 was that strain SLG-4 initially transformed DOP to PA via de-esterification pathway, and then PA was metabolized to protocatechuate acid and eventually converted to tricarboxylic acid (TCA) cycle through meta-cleavage pathway. Accordingly, Phthalate 3,4-dioxygenase genes (phtA) responsible for PA degradation were successfully detected in Arthrobacter sp. SLG-4 by real-time quantitative PCR (q-PCR). q-PCR analysis demonstrated that the quantity of phthalate 3,4-dioxygenase was positively correlated to DOP degradation in SBRs. Bioaugmentation by inoculating DOP-degrading bacteria effectively shortened the start-up of SBRs and significantly enhanced DOP degradation in bioreactors. More than 91% of DOP (500 mg L^-1) was removed in SBR bioaugmented with bacterial consortium, which was double of the control SBR. This study suggests bioaugmentation is an effective and feasible technique for DOP bioremediation in practical engineering.

Rapid nitrification process upgrade coupled with succession of the microbial community in a full-scale municipal wastewater treatment plant (WWTP)

Bioaugmentation was used to upgrade the nitrification process in a full-scale municipal WWTP with an A²/O system. A mixture of nitrifying bacteria was inoculated into the bioreactor for a final concentration of 1% (v/v). The upgrade process took 25 days, and the NH₄⁺-N removals reached 94.6% (increased at least by 75%). The effluent concentrations of COD and NH₄⁺-N stabilized at <30 mg/L and <4 mg/L even when the corresponding influent concentrations were over 300 mg/L and 60 mg/L, which met the first-class requirement of the National Municipal Wastewater Discharge Standards of China (COD ≤ 50 mg/L, NH₄⁺-N ≤ 5 mg/L). The succession of the microbial community showed the enhanced NH₄⁺-N removal efficiency mainly resulted from the persistence of introduced ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), which increased from 0% to 0.4% and from 0.01% to 2.1%, respectively. This bioaugmentation was shown as an effective technology for upgrading or retrofitting conventional systems to tertiary-level.

Treatment of synthetic refinery wastewater in anoxic-aerobic sequential moving bed reactors and sulphur recovery

Objective of the present study was to simultaneously biodegrade synthetic petroleum refinery wastewater containing phenol (750 mg/L), sulphide (750 mg/L), hydrocarbon (as emulsified diesel of 300 mg/L), ammonia-nitrogen (350 mg/L) at pH >9 in anoxic-aerobic sequential moving bed reactors. The optimum mixing speed of anoxic reactor was observed at 20 rpm and beyond that, removal rate remained constant. In anoxic reactor the minimum hydraulic retention time was observed to be 2 days for complete removal of sulphide, 40-50% removal of phenol and total hydrocarbons and 52% of sulphur recovery. The optimum HRT of aerobic moving bed reactor was observed as 16 h (total HRT of 64 h for anoxic and aerobic reactors) for complete removals of phenol, total hydrocarbons, COD (chemical oxygen demand) and ammonia-nitrogen with nitrification.

Impacts of biostimulation and bioaugmentation on the performance and microbial ecology in methanogenic reactors treating purified terephthalic acid wastewater

Up-flow anaerobic sludge blanket (UASB) processes treating purified terephthalic acid (PTA) wastewater often face challenges associated with biomass loss. As excessive biomass loss could lead to deterioration of PTA removal, biostimulation and bioaugmentation were often practiced without understanding the microbial impact in UASB. Three laboratory-scale UASB reactors were operated with synthetic PTA wastewater as the feed, with two added with co-substrate (glucose or molasses) on Day 170 for 90 days, and one with external granules on Day 118. Throughout the operation, treatment performance was measured together with the analysis of microbial communities of biomass samples using 16S rRNA-based gene Illumina sequencing. Glucose amendment destabilized both terephthalic acid and para-toluic acid removal, while molasses amendment improved para-toluic acid removal. Both substrate addition generally led to decreases in the abundances of syntrophs and methanogens and increases in carbohydrate-fermenting bacteria in the granular sludge. Regarding bioaugmentation, paper mill granule addition led to a temporary crash of terephthalic acid removal for 42 days, and deterioration of para-toluic acid removal throughout the operation. Syntrophs and methanogens were observed to colonize on the paper mill granules after three months, meanwhile growth of methanogens were stimulated on the PTA granules added initially. Overall, proper level of molasses amendment and external granule inoculation could be promising strategies to make up for biomass loss during the operation of PTA-degrading UASB.

Microbial communities in the functional areas of a biofilm reactor with anaerobic-aerobic process for oily wastewater treatment

Microbial communities in the functional areas of biofilm reactors with large height-diameter ratio using the anaerobic-aerobic (A/O) reflux process was investigated to treat heavy oil refinery wastewater without pretreatment. In the process, chemical oxygen demand (COD) and total nitrogen (TN) removal reached 93.2% and 82.8%, and the anaerobic biofilm reactor was responsible for 95% and 99%, respectively. Areas for hydrolysis acidification and acetic acid production, methane production, and COD recovery were obvious in the anaerobic reactor. Among all areas, area for hydrolysis acidification and acetic acid production was the key factor to improve COD removal efficiency. High throughput sequencing of 16S rDNA gene showed that the native community was mainly composed of functional groups for hydrocarbon degradation, syntrophic bacteria union body, methanogenesis, nitrification, denitrification, and sulfate reduction. The deviations between predicted values and actual COD and TN removal were less than 5% in the optimal prediction model.

Performance and microbial community dynamics of electricity-assisted sequencing batch reactor (SBR) for treatment of saline petrochemical wastewater

High-salinity wastewater is often difficult to treat by common biological technologies due to salinity stress on the bacterial community. Electricity-assisted anaerobic technologies have significantly enhanced the treatment performance by alleviating the impact of salinity stress on the bacterial community, but electricity-assisted aerobic technologies have less been reported. Herein, a novel bio-electrochemistry system has been designed and operated in which a pair of stainless iron mesh-graphite plate electrodes were installed into a sequencing batch reactor (SBR, designated as S1) to strengthen the performance of saline petrochemical wastewater under aerobic conditions. The removal efficiency of phenol and chemical oxygen demand (COD) in S1 were 94.1 and 91.2%, respectively, on day 45, which was clearly higher than the removal efficiency of a single SBR (S2) and an electrochemical reactor (S3), indicating that a coupling effect existed between the electrochemical process and biodegradation. A certain amount of salinity (≤8000 mg/L) could enhance the treatment performance in S1 but weaken that in S2. Illumina sequencing revealed that microbial communities in S1 on days 45 and 91 were richer and more diverse than in S2, which suggests that electrical stimulation could enhance the diversity and richness of the microbial community, and reduce the negative effect of salinity on the microorganisms and enrich some salt-adapted microorganisms, thus improve the ability of S1 to respond to salinity stress. This novel bio-electrochemistry system was shown to be an alternative technology for the high saline petrochemical wastewater.

Biotreatment of Petrochemical Wastewater: A Case Study from Northern Tunisia

  A full-scale study has been conducted to assess the bioaugmentation efficiency of trickling filter process to treat petrochemical wastewater from a lubricant industry recycling waste oils. During 45 weeks, the organic loading rate (OLR) in the trickling filter was increased stepwise from 0.9 to 4 kg of chemical oxygen demand (COD)/(m3·day) at the end of the upgrading period as the flow rate (FR) reached the value of 30 m3/day. The removal, obtained in terms of percentage, for COD ranged from 60 to 84.5 and greater than 98 for total n-alkane (TNA), while those of total kjeldahl nitrogen (TKN) and total phosphor (TP) were about 32 and 55, respectively. The analytical profile index (API) of trickling biofilm has confirmed that 5 strains are closely related to Acinobacter junii, Stenotrophomonas maltophilia, Vibrio vulnificus, Vibrio metschnikovi, Pseudomona slulzeri and Trichosporon spp2.

Potential of wheat bran to promote indigenous microbial enhanced oil recovery

Microbial enhanced oil recovery (MEOR) is an emerging oil extraction technology that utilizes microorganisms to facilitate recovery of crude oil in depleted petroleum reservoirs. In the present study, effects of wheat bran utilization were investigated on stimulation of indigenous MEOR. Biostimulation conditions were optimized with the response surface methodology. The co-application of wheat bran with KNO₃ and NH₄H₂PO₄ significantly promoted indigenous MEOR (IMEOR) and exhibited sequential aerobic (O-), facultative (A_n-) and anaerobic (A₀-) metabolic stages. The surface tension of fermented broth decreased by approximately 35%, and the crude oil was highly emulsified. Microbial community structure varied largely among and in different IMEOR metabolic stages. Pseudomonas sp., Citrobacter sp., and uncultured Burkholderia sp. dominated the O-, A_n- and early A₀-stages. Bacillus sp., Achromobacter sp., Rhizobiales sp., Alcaligenes sp. and Clostridium sp. dominated the later A₀-stage. This study illustrated occurrences of microbial community succession driven by wheat bran stimulation and its industrial potential.

Research of combined adsorption-coagulation process in treating petroleum refinery effluent

The petroleum refinery industry generates a significant amount of wastewater that contains a high level of organic matter, which calls for effective and costly treatments. In this research, the effectiveness of the petroleum refinery effluent (PRE) treatment with physicochemical process of combined adsorption and coagulation was evaluated. The effects of initial pH, hydraulic condition , and combined sequence of treatment process, different treating reagent types and dosages on the chemical oxygen demand (COD) removal were investigated. Additionally, the elimination efficiency of pollutant wastewater was monitored by gas chromatography-mass spectrometry (GC-MS), and Fourier transformed infrared (FT-IR) spectrophotometer was adopted to describe the structure of the wastewater. Wooden activated carbon was chosen as adsorbent at the dosage of 10 g/L as a primary treatment, and 1500 mg/L polymeric magnesium ferric sulfate was used in coagulation. Results showed that adsorption and subsequent coagulation displayed the best performance when initial pH was 9 at shear rates (G) of G1 = 65 s^-1 and G2 = 20 s^-1, which reached maximal removal rate of COD and total organic carbon GC-MS testing result revealed that adsorption was effective in phenols and iso-alkanes removal, whereas coagulation was good at removing esters and n-alkanes.

Spatial distributions of δ13C, δ15N and C/N ratios in suspended particulate organic matter of a bay under serious anthropogenic influences: Daya Bay, China

Stable isotopic signatures (δ¹³C and δ¹⁵N) and C/N ratios of suspended particulate organic matter (POM) were investigated from the surface water of Daya Bay during summer and winter of 2015. The relatively high δ¹³C_POM values suggested the input of ¹³C-depleted terrigenous organic matter was low in Daya Bay. There were significant correlations between δ¹³C_POM values and chlorophyll a concentrations both during summer and winter, suggesting the δ¹³C_POM values were mainly controlled by the phytoplankton biomass in the surface water. The distribution of δ¹⁵N_POM values was more complicated than that of δ¹³C_POM and displayed low values in the outer bay and the Dan'ao River estuary. ¹⁵N-depleted ammonia originating from industrial wastewater might have strongly influenced the water quality and stable isotopic signatures of POM near the Dan'ao River estuary. The δ¹³C_POM and δ¹⁵N_POM values strongly reflect the influences of anthropogenic activity and eutrophication in Daya Bay.

Isolation and characterization of Sphingomonas sp. Y2 capable of high-efficiency degradation of nonylphenol polyethoxylates in wastewater

Nonylphenol polyethoxylates (NPEOs), although banned for decades, are still widely used in manufactories and thus affect human lives. In this study, a highly efficient NPEO-degrading bacterium, Sphingomonas sp. Y2, was isolated from sewage sludge by enrichment culture. Strain Y2 ensured the complete removal of NPEO in 48 h and degraded 99.2 % NPEO (1,000 mg L(-1)) within 30 h at a specific growth rate of 0.73 h(-1) in minimum salt medium. To date, this degradation efficiency is the highest reported for NPEO metabolism by a pure bacterium under this condition. Furthermore, the application of this bacterium to wastewater treatment demonstrated that it metabolized 98.5 % NPEO (1,000 mg L(-1)) within 5 days with a specific growth rate of 2.03 day(-1). The degradation intermediates, identified as nonylphenol, short-chain NPEOs and short-chain nonylphenol polyethoxycarboxylates by high-performance liquid chromatography and gas chromatography-mass spectrometry, indicated the sequential exo-cleavage of the EO chain. Additionally, the enzymes involved in the biodegradation were inducible rather than constitutive. Considering that strain Y2 exhibits prominent biodegradation advantages in industrial wastewater treatment, it might serve as a promising potential candidate for in situ bioremediation of contamination by NPEOs and other structurally similar compounds.

Bioaugmentation for treatment of full-scale diethylene glycol monobutyl ether (DGBE) wastewater by Serratia sp. BDG-2

A novel bacterial strain BDG-2 was isolated and used to augment the treatment of silicon plate manufacturing wastewater that primarily contains diethylene glycol monobutyl ether (DGBE). BDG-2 was identified as a Serratia sp. Under the optimal conditions of 30 °C, pH 9 and DGBE concentration of 2000 mg L(-1), the bioaugmented system achieved 96.92% COD removal after 39.9h. Laboratory-scale technological matching results indicated that, in a biofilm process with the addition of 100 mg L(-1) ammonia and 5 mg L(-1) total phosphorus (TP), 70.61% COD removal efficiency could be obtained in 46 h. Addition of polyaluminium chloride (PAC) to the reactors during the suspension process enhanced the settleability of the BDG-2 culture. Subsequently, successful start-up and stable operation of a full-scale bioaugmented treatment facilities were accomplished, and the volumetric organic load in the plug-flow aeration tank was 2.17 ± 0.81 kg m(-3) d(-1). The effluent COD of the facilities was stable and always below 100 mg L(-1).