Various pretreatments of lignocellulosics

Bioprospecting of cellulases from marine fungi for macro-algal biomass degradation for biofuel application

The marine ecosystem, the largest on Earth, supports around 80 % of plant and animal species. Marine macroalgae, rich in polysaccharides like cellulose, remain underutilized despite their potential in a circular bioeconomy. Efficient valorization can promote sustainability, whereas mismanagement raises ecological concerns. Unlike lignocellulosic biomass, macroalgae lack lignin, making their processing unique. Global interest in macroalgae for biofuel applications is growing, particularly through polysaccharide-degrading biocatalysts like cellulases. Fungi, known for secreting extracellular cellulases and other enzymes, play a key role in biomass degradation. Marine fungi associated with macroalgae may possess enhanced enzymatic capabilities, enabling efficient algal polysaccharide breakdown. These fungi have immense potential in macroalgal biorefineries, facilitating the conversion of complex polysaccharides into oligosaccharides and monosaccharides for biofuels, pharmaceuticals, nutraceuticals, and cosmetics. Developing advanced bioprocessing technologies for marine fungi could provide robust cellulases that withstand industrial conditions, optimizing macroalgal biomass conversion. This review comprehensively examines cellulase production from marine fungi, their bioprocessing strategies, and their role in degrading macroalgal biomass. Additionally, other fungal enzymes and their industrial applications are briefly discussed. This study highlights the potential of marine fungi-derived cellulases in biofuel production, aligning with sustainable development goals and supporting global bioeconomic advancements.

Crystal structure and functional characterization of a novel bacterial lignin-degrading dye-decolorizing peroxidase

A new gene coding for an iron-containing enzyme was identified in the genome of Acinetobacter radioresistens. Bioinformatics analysis allowed the assignment of the protein to DyP peroxidases, due to the presence of conserved residues involved in heme binding and catalysis. Moreover, Ar-DyP is located in an operon coding also for other enzymes involved in iron uptake and regulation. The crystal structure of Ar-DyP determined at 1.85 Å resolution shows that the heme pocket Ar-DyP is "wet" forming a continuous hydrogen-bond network that enables the communication between heme and distal residues. Moreover, as shown by the crystal structure and covalent crosslinking experiments, Ar-DyP uses a long-range electron transfer pathway involving His-181 and Tyr-241, in the active site and on the surface of the enzyme, respectively. This pathway allows oxidation of substrates of different sizes, including Kraft lignin. Indeed, the biochemical characterization showed that Ar-Dyp oxidizes ABTS and Reactive Blue 19 (turnover numbers of 500 and 464 min-1, respectively), but also phenolic compounds such as guaiacol and pyrogallol (turnover numbers of 7.4 and 1.8 min-1 respectively). Overall, the data shows that Ar-DyP is a promising candidate for applications in lignin valorization, bioremediation and industrial processes involving the breakdown of phenolic compounds.

Microwave Effect in Hydrolysis of Levoglucosan with a Solid Acid Catalyst for Pyrolysis-Based Cellulose Saccharification

Pyrolysis-based saccharification consisting of fast pyrolysis followed by hydrolysis of the resulting anhydrosugars such as levoglucosan is a promising method for converting cellulosic biomass into glucose that can be used for producing biofuels and biochemicals. In the present study, hydrolysis of levoglucosan was evaluated in water with a polystyrene sulfonic acid resin (a solid acid catalyst) by heating under microwave irradiation or in an oil bath at 95 °C-120 °C. When the equilibrium temperature of the solution was the same, the conversion rate of levoglucosan was greater under microwave irradiation than in an oil bath. Model experiments indicate that the sulfonyl groups of the solid acid catalyst were selectively heated by microwave irradiation. The temperature of the reaction solution in the vicinity of the catalyst was locally higher than the equilibrium temperature of the solution, which enabled hydrolysis to proceed efficiently.

The development and nutritional quality of Lyophyllum decastes affected by monochromatic or mixed light provided by light-emitting diode

Edible fungi has certain photo-sensitivity during the mushroom emergence stage, but there has been few relevant studies on the responses of Lyophyllum decastes to different light quality. L. decastes were planted in growth chambers with different light qualities that were, respectively, white light (CK), monochromatic red light (R), monochromatic blue light (B), mixed red and blue light (RB), and the mixture of far-red and blue light (FrB). The photo-sensitivity of L. decastes was investigated by analyzing the growth characteristics, nutritional quality, extracellular enzymes as well as the light photoreceptor genes in mushroom exposed to different light treatments. The results showed that R led to mycelium degeneration, fungal skin inactivation and failure of primordial formation in L. decastes. The stipe length, stipe diameter, pileus diameter and the weight of fruiting bodies exposed to RB significantly increased by 8.0, 28.7, 18.3, and 58.2% respectively, compared to the control (p < 0.05). B significantly decreased the stipe length and the weight of fruiting body, with a decrease of 8.5 and 20.2% respectively, compared to the control (p < 0.05). Increased color indicators and deepened simulated color were detected in L. decastes pileus treated with B and FrB in relative to the control. Meanwhile, the expression levels of blue photoreceptor genes such as WC-1, WC-2 and Cry-DASH were significantly up-regulated in mushroom exposed to B and FrB (p < 0.05). Additionally, the contents of crude protein and crude polysaccharide in pileus treated with RB were, respectively, increased by 26.5 and 9.4% compared to the control, while those in stipes increased by 5.3 and 58.8%, respectively. Meanwhile, the activities of extracellular enzyme such as cellulase, hemicellulase, laccase, manganese peroxidase, lignin peroxidase and amylase were significant up-regulated in mushroom subjected to RB (p < 0.05), which may promote the degradation of the culture materials. On the whole, the largest volume and weight as well as the highest contents of nutrients were all detected in L. decastes treated with RB. The study provided a theoretical basis for the regulation of light environment in the industrial production of high quality L. decastes.

Adaptive laboratory evolution to obtain furfural tolerant Saccharomyces cerevisiae for bioethanol production and the underlying mechanism

Introduction

Furfural, a main inhibitor produced during pretreatment of lignocellulose, has shown inhibitory effects on S. cerevisiae.

Method

In the present study, new strains named 12-1 with enhanced resistance to furfural were obtained through adaptive laboratory evolution, which exhibited a shortened lag phase by 36 h, and an increased ethanol conversion rate by 6.67% under 4 g/L furfural.

Results and Discussion

To further explore the mechanism of enhanced furfural tolerance, ADR1_1802 mutant was constructed by CRISPR/Cas9 technology, based on whole genome re-sequencing data. The results indicated that the time when ADR1_1802 begin to grow was shortened by 20 h compared with reference strain (S. cerevisiae CEN.PK113-5D) when furfural was 4 g/L. Additionally, the transcription levels of GRE2 and ADH6 in ADR1_ 1802 mutant were increased by 53.69 and 44.95%, respectively, according to real-time fluorescence quantitative PCR analysis. These findings suggest that the enhanced furfural tolerance of mutant is due to accelerated furfural degradation. Importance: Renewable carbon worldwide is vital to achieve "zero carbon" target. Bioethanol obtained from biomass is one of them. To make bioethanol price competitive to fossil fuel, higher ethanol yield is necessary, therefore, monosaccharide produced during biomass pretreatment should be effectively converted to ethanol by Saccharomyces cerevisiae. However, inhibitors formed by glucose or xylose oxidation could make ethanol yield lower. Thus, inhibitor tolerant Saccharomyces cerevisiae is important to this process. As one of the main component of pretreatment hydrolysate, furfural shows obvious impact on growth and ethanol production of Saccharomyces cerevisiae. To get furfural tolerant Saccharomyces cerevisiae and find the underlying mechanism, adaptive laboratory evolution and CRISPR/Cas9 technology were applied in the present study.

Optimization of biogas production from straw wastes by different pretreatments: Progress, challenges, and prospects

Lignocellulosic biomass (LCB) presents a promising feedstock for carbon management due to enormous potential for achieving carbon neutrality and delivering substantial environmental and economic benefit. Bioenergy derived from LCB accounts for about 10.3 % of the global total energy supply. The generation of bioenergy through anaerobic digestion (AD) in combination with carbon capture and storage, particularly for methane production, provides a cost-effective solution to mitigate greenhouse gas emissions, while concurrently facilitating bioenergy production and the recovery of high-value products during LCB conversion. However, the inherent recalcitrant polymer crystal structure of lignocellulose impedes the accessibility of anaerobic bacteria, necessitating lignocellulosic residue pretreatment before AD or microbial chain elongation. This paper seeks to explore recent advances in pretreatment methods for LCB biogas production, including pulsed electric field (PEF), electron beam irradiation (EBI), freezing-thawing pretreatment, microaerobic pretreatment, and nanomaterials-based pretreatment, and provide a comprehensive overview of the performance, benefits, and drawbacks of the traditional and improved treatment methods. In particular, physical-chemical pretreatment emerges as a flexible and effective option for methane production from straw wastes. The burgeoning field of nanomaterials has provoked progress in the development of artificial enzyme mimetics and enzyme immobilization techniques, compensating for the intrinsic defect of natural enzyme. However, various complex factors, such as economic effectiveness, environmental impact, and operational feasibility, influence the implementation of LCB pretreatment processes. Techno-economic analysis (TEA), life cycle assessment (LCA), and artificial intelligence technologies provide efficient means for evaluating and selecting pretreatment methods. This paper addresses current issues and development priorities for the achievement of the appropriate and sustainable utilization of LCB in light of evolving economic and environmentally friendly social development demands, thereby providing theoretical basis and technical guidance for improving LCB biogas production of AD systems.

Analytical Pyrolysis of Pinus radiata and Eucalyptus globulus: Effects of Microwave Pretreatment on Pyrolytic Vapours Composition

Pinus radiata (PR) and Eucalyptus globulus (EG) are the most planted species in Chile. This research aims to evaluate the pyrolysis behaviour of PR and EG from the Bío Bío region in Chile. Biomass samples were subjected to microwave pretreatment considering power (259, 462, 595, and 700 W) and time (1, 2, 3, and 5 min). The maximum temperature reached was 147.69 °C for PR and 130.71 °C for EG in the 700 W-5 min condition, which caused the rearrangement of the cellulose crystalline chains through vibration and an increase in the internal energy of the biomass and the decomposition of lignin due to reaching its glass transition temperature. Thermogravimetric analysis revealed an activation energy (Ea) reduction from 201.71 to 174.91 kJ·mol-1 in PR and from 174.80 to 158.51 kJ·mol-1 in EG, compared to the untreated condition (WOT) for the 700 W-5 min condition, which indicates that microwave pretreatment improves the activity of the components and the decomposition of structural compounds for subsequent pyrolysis. Functional groups were identified by Fourier transform infrared spectroscopy (FTIR). A decrease in oxygenated compounds such as acids (from 21.97 to 17.34% w·w-1 and from 27.72 to 24.13% w·w-1) and phenols (from 34.41 to 31.95% w·w-1 and from 21.73 to 20.24% w·w-1) in PR and EG, respectively, was observed in comparison to the WOT for the 700 W-5 min condition, after analytical pyrolysis. Such results demonstrate the positive influence of the pretreatment on the reduction in oxygenated compounds obtained from biomass pyrolysis.

Preparation of Dissolving Pulp by Combined Mechanical and Deep Eutectic Solvent Treatment

Grasses are potential candidate to replace wood as a raw material for pulping and paper making, and several processes have been developed to produce grass pulp. In this study, wheat straw was used as raw material, and the possibility of sequential treatment with a mechanical method and deep eutectic solvent (DES) to prepare high-quality dissolving pulp was explored. Firstly, the wheat straw was mechanically treated, and then the wheat straw was delignified using a choline chloride-lactic acid deep eutectic solvent. The results showed that the optimal treatment conditions of deep eutectic solvent were 110 °C, 6 h, and a solid-liquid ratio (ratio of pulp to DES) of 1:40. The removal rate of lignin was 82.92%, the glucose content of pulp was increased by 11.42%. The DES recovery rate was further calculated, and the results showed that the DES recovery rate was more than 50% with rotary evaporation. The pulp viscosity after bleaching was 472 mL/g, and the α-cellulose accounted for 81.79%. This treatment has advantages in biomass refining, and the total utilization rate of wheat straw reaches 72%. This study confirmed that combined mechanical and deep eutectic solvent treatment can effectively remove lignin from wheat straw to produce high-quality wheat straw dissolving pulp.

A nitroreductase DnrA catalyzes the biotransformation of several diphenyl ether herbicides in Bacillus sp. Za

Diphenyl ether herbicides, typical globally used herbicides, threaten the agricultural environment and the sensitive crops. The microbial degradation pathways of diphenyl ether herbicides are well studied, but the nitroreduction of diphenyl ether herbicides by purified enzymes is still unclear. Here, the gene dnrA, encoding a nitroreductase DnrA responsible for the reduction of nitro to amino groups, was identified from the strain Bacillus sp. Za. DnrA had a broad substrate spectrum, and the K_m values of DnrA for different diphenyl ether herbicides were 20.67 μM (fomesafen), 23.64 μM (bifenox), 26.19 μM (fluoroglycofen), 28.24 μM (acifluorfen), and 36.32 μM (lactofen). DnrA also mitigated the growth inhibition effect on cucumber and sorghum through nitroreduction. Molecular docking revealed the mechanisms of the compounds fomesafen, bifenox, fluoroglycofen, lactofen, and acifluorfen with DnrA. Fomesafen showed higher affinities and lower binding energy values for DnrA, and residue Arg244 affected the affinity between diphenyl ether herbicides and DnrA. This research provides new genetic resources and insights into the microbial remediation of diphenyl ether herbicide-contaminated environments. KEY POINTS: • Nitroreductase DnrA transforms the nitro group of diphenyl ether herbicides. • Nitroreductase DnrA reduces the toxicity of diphenyl ether herbicides. • The distance between Arg244 and the herbicides is related to catalytic efficiency.

Comparison of Alkaline Sulfite Pretreatment and Acid Sulfite Pretreatment with Low Chemical Loading in Saccharification of Poplar

Sulfite pretreatment is a productive process for lignin dissolution in lignocelluloses and to reduce the hydrophobicity of lignin by sulfonation, thus promoting the hydrolyzability of the substrate. Previously, sulfite pretreatment needs high dosages of chemicals and thus results in the high cost of the pretreatment and the great pressure of environmental pollution. To overcome these problems, it was crucial to research whether alkaline sulfite pretreatment (ALS) and acid sulfite pretreatment (ACS) with low chemical loading could enhance the saccharification of poplar. In this work, the results indicated that with low loading of chemicals in sulfite pretreatment, ALS pretreatment (1.6% Na2SO3 and 0.5% NaOH) at 180 °C removed more lignin, resulted in lower hydrophobicity and higher cellulase adsorption capacity of poplar than ACS pretreatment (1.6% Na2SO3 and 0.5% H2SO4) at 180 °C. A satisfying glucose yield of 84.9% and a xylose yield of 76.0% were obtained from poplar after ALS pretreatment with 1.6% Na2SO3 and 0.5% NaOH at 180 °C for 1 h using 10 FPU cellulase/g dry matter, saving sodium sulfite by 60.0% compared to the loading of sulfite in traditional sulfite pretreatment. The strategy developed in this work reduced chemical loading and cellulase loading in alkali sulfite pretreatment for the saccharification of poplar.

Review of chemical pretreatment of lignocellulosic biomass using low-liquid and low-chemical catalysts for effective bioconversion

Chemical pretreatment of lignocellulosic biomass (LCB) is essential for effective biological conversion in subsequent steps to produce biofuels or biochemicals. For effective pretreatment, high lignin content and its recalcitrant nature of LCB are major factors influencing bioconversion, especially lignin is known to be effectively solubilized by alkaline, organic, and deep eutectic solvents, ionic liquids, while hemicellulose is effectively dissolved by various acid catalysts and organic solvents. Depending on the pretreatment method/catalyst used, different pretreatment process scheme should be applied with different amounts of catalyst and water inputs to achieve a satisfactory effect. In addition, the amount of processing water required in the following processes such as washing, catalyst recovery, and conditioning after pretreatment is critical factor for scale-up (commercialization). In this review, the amount of catalyst and/or water used, and the effect of pretreatment, properties of the products, and recovery of liquid are also discussed.

Towards efficient and greener processes for furfural production from biomass: A review of the recent trends

As mentioned in several recent reviews, biomass-based furfural is attracting increasing interest as a feasible alternative for the synthesis of a wide range of non-petroleum-derived compounds. However, the lack of environmentally friendly, cost-effective, and sustainable industrial procedures is still evident. This review describes the chemical and biological routes for furfural production. The mechanisms proposed for the chemical transformation of xylose to furfural are detailed, as are the current advances in the manufacture of furfural from biomass. The main goal is to overview the different ways of improving the furfural synthesis process. A pretreatment process, particularly chemical and physico-chemical, enhances the digestibility of biomass, leading to the production of >70 % of available sugars for the production of valuable products. The combination of heterogeneous (zeolite and polymeric solid) catalyst and biphasic solvent system (water/GVL and water/CPME) is regarded as an attractive approach, affording >75 % furfural yield for over 80 % of selectivity with the possibility of catalyst reuse. Microwave heating as an activation technique reduces reaction time at least tenfold, making the process more sustainable. The state of the art in industrial processes is also discussed. It shows that, when sulfuric acid is used, the furfural yields do not exceed 55 % for temperatures close to 180 °C. However, the MTC process recently achieved an 83 % yield by continuously removing furfural from the liquid phase. Finally, the CIMV process, using a formic acid/acetic acid mixture, has been developed. The economic aspects of furfural production are then addressed. Future research will be needed to investigate scaling-up and biological techniques that produce acceptable yields and productivities to become commercially viable and competitive in furfural production from biomass.

Alloy-Driven Efficient Electrocatalytic Oxidation of Biomass-Derived 5-Hydroxymethylfurfural towards 2,5-Furandicarboxylic Acid: A Review

In recent years, electrocatalysis was progressively developed to facilitate the selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) towards the value-added chemical 2,5-furandicarboxylic acid (FDCA). Among reported electrocatalysts, alloy materials have demonstrated superior electrocatalytic properties due to their tunable electronic and geometric properties. However, a specific discussion of the potential impacts of alloy structures on the electrocatalytic HMF oxidation performance has not yet been presented in available Reviews. In this regard, this Review introduces the most recent perspectives on the alloy-driven electrocatalysis for HMF oxidation towards FDCA, including oxidation mechanism, alloy nanostructure modulation, and external conditions control. Particularly, modulation strategies for electronic and geometric structures of alloy electrocatalysts have been discussed. Challenges and suggestions are also provided for the rational design of alloy electrocatalysts. The viewpoints presented herein are anticipated to potentially contribute to a further development of alloy-driven electrocatalytic oxidation of HMF towards FDCA and to help boost a more sustainable and efficient biomass refining system.

Production of bioethanol from food waste: Status and perspectives

There is an immediate global requirement for an ingenious strategy for food waste conversion to biofuels in order to replace fossil fuels with renewable resources. Food waste conversion to bioethanol could lead to a sustainable process having the dual advantage of resolving the issue of food waste disposal as well as meeting the energy requirements of the increasing population. Food waste is increasing at the rate of 1.3 billion tonnes per year, considered to be one-third of global food production. According to LCA studies discarding these wastes is detritus to the environment, therefore; it is beneficial to convert the food waste into bioethanol. The CO₂ emission in this process offers zero impact on the environment as it is biogenic. Among several pretreatment strategies, hydrothermal pretreatment could be a better approach for pretreating food waste because it solubilizes organic solids, resulting in an increased recovery of fermentable sugars to produce bioenergy.

Valorization of sawdust by mineral acid assisted hydrothermal carbonization for the adsorptive removal of bisphenol A: A greener approach

sawdust was valorized using acid-assisted hydrothermal carbonization and used in the removal of endocrine disruptor bisphenol A (BPA). The effect of acid addition on the hydrothermal carbonization of sawdust and removal of BPA was studied. Two different hydrochars were prepared using deionized water (HC_D) and hydrochloric acid solution (HC_AH) as feed water. The prepared hydrochars were characterized using FESEM, EDS, XRD, Raman spectroscopy, FTIR, TGA, and surface area analysis to study the structural and functional changes. Then they were compared in the removal of bisphenol A. Out of the two hydrochars prepared, acid-assisted hydrothermal carbonized hydrochar (HC_AH) showed better removal efficiency. Hence, HC_AH was used to study the influence of different parameters like pH, adsorbent dosage, and initial bisphenol A concentration by one variable at a time approach. Further, the study of interactive effects and optimization of adsorption of bisphenol A onto HC_AH was carried out using RSM-CCD. The isotherm, kinetics, and thermodynamic studies revealed that the adsorption of bisphenol A could be explained by the Freundlich isotherm, pseudo-second-order kinetics fitted well in all the initial BPA concentrations, and the adsorption of bisphenol A onto HC_AH was exothermic and spontaneous.

Influence of thermochemical activation of wood on the physicochemical properties of lignin

The wood matrix is a lignin–carbohydrate nanobiocomposite, thermodynamically quasi-equilibrium heterogeneous system of biopolymers. Changing its thermodynamic equilibrium due to directed chemical and (or) physical impacts opens up new approaches to the study of plant objects. Thermochemical activation, including treatments in sub- (steam explosion) and supercritical conditions (supercritical fluid extraction) having similar mechanisms of action, is one such method. The effect of steam explosion is determined by two components — chemical (the catalytic effect of formed acetic and formic acid) and physical (a sharp adiabatic expansion). The main components of supercritical treatment are increased temperature and pressure in the CO2 medium with cosolvents. The chemical component of this treatment is due to the addition of chemical reagents. Such treatments lead to a change in the thermodynamic state and capillary-porous structure of the lignin–carbohydrate matrix, an increase in its heterogeneity, and the yield of extracted lignin preparations. Lignin is the most reactive component of the wood matrix, and these processes result in changes in its functional nature and reaction properties. Thus, the lignin sample extracted after steam explosion had the greatest increase in the content of phenolic hydroxyl (by 39 rel.%) and carboxyl (by 57 rel.%) groups. Change in the functional composition of lignin leads to a change in its redox state, characterized by the oxidative potential and free energy of oxidation. It was shown that lignin after steam explosion had the highest oxidative potential and the lowest value of the oxidation energy, which indicated the greatest change in its reactivity in redox interactions.

Effect of Ammoniated Fiber Explosion Combined with H2O2 Pretreatment on the Hydrogen Production Capacity of Herbaceous and Woody Waste

An appropriate pretreatment process is an important part of the preparation of biomass energy from agricultural and forestry waste. Compared to physical and chemical pretreatments alone, the combined ammoniated fiber explosion (AFEX) + hydrogen peroxide (H₂O₂) pretreatment process can significantly improve the lignin degradation rate and saccharification efficiency, thus improving the hydrogen production capacity during medium-temperature dark fermentation. This study showed that the combined pretreatment increased the saccharification efficiency of herbaceous, hardwood, and softwood biomass by 58.7, 39.5, and 20.6% and the corresponding gas production reached 145.49, 80.75, and 57.52 mL/g, respectively. In addition, X-ray diffraction, scanning electron microscopy, and Fourier-transform infrared spectroscopy showed that AFEX + H₂O₂ disrupted the structure of the feedstock and was more favorable for lignin removal. Soluble metabolites indicated that AFEX + H₂O₂ pretreatment enhanced the butyrate metabolic pathway of the substrate and biohydrogen generation and increased the levels of extracellular polymers and microbial community structure.

The application of green solvent in a biorefinery using lignocellulosic biomass as a feedstock

The high dependence on crude oil for energy utilization leads to a necessity of finding alternative sustainable resources. Solvents are often employed in valorizing the biomass into bioproducts and other value-added chemicals during treatment stages. Unfortunately, despite the effectiveness of conventional solvents, hindrances such as expensive solvents, unfavourable environmental ramifications, and complicated downstream separation systems often occur. Therefore, the scientific community has been actively investigating more cost-effective, environmentally friendly alternatives and possess the excellent dissolving capability for biomass processing. Generally, 'green' solvents are attractive due to their low toxicity, economic value, and biodegradability. Nonetheless, green solvents are not without disadvantages due to their complicated product recovery, recyclability, and high operational cost. This review summarizes and evaluates the recent contributions, including potential advantages, challenges, and drawbacks of green solvents, namely ionic liquids, deep eutectic solvents, water, biomass-derived solvents and carbon dioxide in transforming the lignocellulosic biomass into high-value products. Moreover, research opportunities for future developments and potential upscale implementation of green solvents are also critically discussed.

Advancement of biorefinery-derived platform chemicals from macroalgae: a perspective for bioethanol and lactic acid

The extensive growth of energy and plastic demand has raised concerns over the depletion of fossil fuels. Moreover, the environmental conundrums worldwide integrated with global warming and improper plastic waste management have led to the development of sustainable and environmentally friendly biofuel (bioethanol) and biopolymer (lactic acid, LA) derived from biomass for fossil fuels replacement and biodegradable plastic production, respectively. However, the high production cost of bioethanol and LA had limited its industrial-scale production. This paper has comprehensively reviewed the potential and development of third-generation feedstock for bioethanol and LA production, including significant technological barriers to be overcome for potential commercialization purposes. Then, an insight into the state-of-the-art hydrolysis and fermentation technologies using macroalgae as feedstock is also deliberated in detail. Lastly, the sustainability aspect and perspective of macroalgae biomass are evaluated economically and environmentally using a developed cascading system associated with techno-economic analysis and life cycle assessment, which represent the highlights of this review paper. Furthermore, this review provides a conceivable picture of macroalgae-based bioethanol and lactic acid biorefinery and future research directions that can be served as an important guideline for scientists, policymakers, and industrial players.

Graphical abstract

Evaluation of Blend Production of Cellulases and Xylanases Using Pretreated and Recycled Carnauba Straw

Carnauba (Copernicia prunifera) is a Brazilian palm tree used for wax production, which usually generates a large amount of waste. This work evaluated the carnauba waste for cellulase and xylanase production using Trichoderma reesei CCT2768 through a solid-state fermentation (SSF). Carnauba waste was used in its crude form (C-IN), pretreated (C-P) with alkaline hydrogen peroxide (AHP), and also recycled after the SSF process (C-PR). C-IN, C-P, and C-PR were characterized by XRD, FTIR, and SEM. Cellulase and xylanase production was performed by SSF for 72 h, and the enzymatic extracts obtained were mixed each other in different concentrations. FPase, CMCase, and xylanase activities were determined. Trichoderma reesei CCT-2768 has shown high performance to produce cellulases and xylanases. Total cellulase, CMCase, and β-glycosidase presented a highest activity when C-PPR1 (25% of C-PR and 75% of C-P) was used as a carbon source, with yield of 2.85 U/g, 41.21 U/g, and 2.80 U/g, respectively. The highest xylanase production was achieved when only the pretreated carnauba waste (C-P) was used, with an enzyme activity of 224.93 U/g. Carnauba has shown a promising carbon source capacity to induce the production of cellulolytic and xylanolytic enzymes by using T. reesei CCT2768, promoting the circular and ecofriendly economy, as well as a cost reduction, of the production process of these enzymes.

Evaluation of miscanthus pretreatment effect by Choline chloride based Deep Eutectic solvents on bioethanol production

This work evaluates the efficiency of three deep eutectic solvents constituted of choline chloride and urea or glycerol or ethylene glycol in the pretreatment of the miscanthus in view of extracting cellulose. Analysis of experiments shows that basicity and polarity of the hydrogen bond donor of these DESs are directly related to the miscanthus solubility. The best efficient process was found using {Choline chloride/glycerol} mixture for the pretreatment at a temperature of 373 K and a duration of about 6 h. This may be explained by the fact that {Choline chloride/glycerol} pretreatment allows to obtain an amorphous cellulose. {Choline chloride/glycerol} was as efficiently as IL pretreatments with an ethanol production of about 72%. This study shows that Choline chloride based DESs pretreatment for biomass could be a key point to enhance the efficiency of biorefinery.

Hydrothermal pretreatment technologies for lignocellulosic biomass: A review of steam explosion and subcritical water hydrolysis

The pretreatment of lignocellulosic biomass enhances the conversion efficiency to produce biofuels and value-added chemicals, which have the potential to replace fossil fuels. Compared to physicochemical and other pretreatment techniques, the hydrothermal methods are considered eco-friendly and cost-effective. This paper reviews the strengths, weaknesses, opportunities and threats of steam explosion and subcritical water hydrolysis as the two promising hydrothermal technologies for the pretreatment of lignocellulosic biomass. Although the principle of the steam explosion in depolymerizing the lignin and exposing the cellulose fibers for bioconversion to liquid fuels is well known, its underlying mechanism for solid biofuel production is less identified. Therefore, this review provides an insight into different operating conditions of steam explosion and subcritical water hydrolysis for a wide variety of feedstocks. The mechanisms of subcritical water hydrolysis including dehydration, decarboxylation and carbonization of waste biomass are comprehensively described. Finally, the role of microwave heating in the hydrothermal pretreatment of biomass is elucidated.

Hydrothermal pretreatment of lignocellulosic biomass for hemicellulose recovery

The hemicellulosic fraction recovery is of interest for integrated processes in biorefineries, considering the possibility of high economic value products produced from their structural compounds of this polysaccharide. However, to perform an efficient recovery, it is necessary to use biomass fractionation techniques, and hydrothermal pretreatment is highlighted as a valuable technique in the hemicellulose recovery by applying high temperatures and pressure, causing dissolution of the structure. Considering the possibility of this pretreatment technique for current approaches to hemicellulose recovery, this article aimed to explore the relevance of hydrothermal pretreatment techniques (sub and supercritical water) as a strategy for recovering the hemicellulosic fraction from lignocellulosic biomass. Discussions about potential products to be generated, current market profile, and perspectives and challenges of applying the technique are also addressed.

Ultrastructural change in lignocellulosic biomass during hydrothermal pretreatment

In recent years, visualization and characterization of lignocellulose at different scales elucidate the modifications of its ultrastructural and chemical features during hydrothermal pretreatment which include degradation and dissolving of hemicelluloses, swelling and partial hydrolysis of cellulose, melting and redepositing a part of lignin in the surface. As a result, cell walls are swollen, deformed and de-laminated from the adjacent layer, lead to a range of revealed droplets that appear on and within cell walls. Moreover, the certain extent morphological changes significantly promote the downstream processing steps, especially for enzymatic hydrolysis and anaerobic fermentation to bioethanol by increasing the contact area with enzymes. However, the formation of pseudo-lignin hinders the accessibility of cellulase to cellulose, which decreases the efficiency of enzymatic hydrolysis. This review is intended to bridge the gap between the microstructure studies and value-added applications of lignocellulose while inspiring more research prospects to enhance the hydrothermal pretreatment process.

Rice husk hydrochars from metal chloride-assisted hydrothermal carbonization as biosorbents of organics from aqueous solution

Hydrochar a carbon-rich material resulting from hydrothermal carbonization of biomass, has received substantial attention because of its potential application in various areas such as carbon sequestration, bioenergy production and environmental amelioration. A series of hydrochars were prepared by metal chloride-assisted hydrothermal carbonization of rice husk and characterized by elemental analysis, zeta potential, X-ray diffraction, Brunauer-Emmett-Teller measurements, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy and scanning electron microscopy. The results reveal that the prepared hydrochars have carbon contents ranging from 45.01 to 58.71%, BET specific areas between 13.23 and 45.97 m2/g, and rich O-containing functional groups on the surfaces. The metal chlorides added in the feedwater could improve the degree of carbonization and show significant effects on the physical, chemical and adsorption properties of the hydrochars. The adsorption of the selected organics on the hydrochars is a spontaneous and physisorption-dominated process. The hydrochars possess larger adsorption capacities for 2-naphthol than for berberine hydrochloride and Congo red, and the modeling maximum adsorption capacities of 2-naphthol are in the range of 170.1-2680 mg/g. The adsorption equilibrium could be accomplished in 10, 40 and 30 min for 2-naphthol, berberine hydrochloride and Congo red, respectively. These results suggest metal chloride-assisted hydrothermal carbonization a promising method for converting biomass waste into effective adsorbents for wastewater treatment.

Nanocellulose from Agricultural Wastes: Products and Applications—A Review

The isolation of nanocellulose from different agricultural residues is becoming an important research field due to its versatile applications. This work collects different production processes, including conditioning steps, pretreatments, bleaching processes and finally purification for the production of nanocellulose in its main types of morphologies: cellulose nanofiber (CNF) and cellulose nanocrystal (CNC). This review highlights the importance of agricultural wastes in the production of nanocellulose in order to reduce environmental impact, use of fossil resources, guarantee sustainable economic growth and close the circle of resource use. Finally, the possible applications of the nanocellulose obtained as a new source of raw material in various industrial fields are discussed.

Effects of maize straw treated with various levels of CaO and moisture on composition, structure, and digestion by in vitro gas production

OBJECTIVE

The objective of this study was to explore the effects of maize straw treated with calcium oxide (CaO) and various moisture, on the composition and molecular structure of the fiber, and gas production by fermentation in an in vitro rumen environment.

METHODS

The experiment used 4×3 Factorial treatment. Maize straws were treated with 4 concentrations of CaO (0%, 3%, 5%, and 7% of dry straw weight) and 3 moisture contents (40%, 50%, and 60%). Scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray fluorescence spectroscopy were employed to measure the surface texture, secondary molecular structure of carbohydrate, and calcium (Ca) content of the maize straw, respectively. The correlation of secondary molecular structures and fiber components of maize straw were analyzed by CORR procedure of SAS 9.2. In vitro rumen fermentation was performed for 6, 12, 24, 48, and 72 h to measure gas production.

RESULTS

Overall, the moisture factor had no obvious effect on the experimental results. Neutral detergent fiber (NDF), acid detergent fiber, acid detergent lignin, hemicellulose and cellulose contents decreased (p<0.05) with increasing concentrations of CaO treatment. Surface and secondary molecular structure of maize straw were affected by various CaO and moisture treatments. NDF had positive correlation (p<0.01) with Cell-H (H, height), Cell-A (A, area), CHO-2-H. Hemicellulose had positive correlation (p<0.01) with Lignin-H, Lignin-A, Cell-H, Cell-A. Ca content of maize straw increased as the concentration of CaO was increased (p<0.01). Gas production was highest in the group treated with 7% CaO.

CONCLUSION

CaO can adhere to the surface of the maize straw, and then improve the digestibility of the maize straw in ruminants by modifying the structure of lignocellulose and facilitating the maize straw for microbial degradation.

Optimization of biogas yield from lignocellulosic materials with different pretreatment methods: a review

Population increase and industrialization has resulted in high energy demand and consumptions, and presently, fossil fuels are the major source of staple energy, supplying 80% of the entire consumption. This has contributed immensely to the greenhouse gas emission and leading to global warming, and as a result of this, there is a tremendous urgency to investigate and improve fresh and renewable energy sources worldwide. One of such renewable energy sources is biogas that is generated by anaerobic fermentation that uses different wastes such as agricultural residues, animal manure, and other organic wastes. During anaerobic digestion, hydrolysis of substrates is regarded as the most crucial stage in the process of biogas generation. However, this process is not always efficient because of the domineering stableness of substrates to enzymatic or bacteria assaults, but substrates' pretreatment before biogas production will enhance biogas production. The principal objective of pretreatments is to ease the accessibility of the enzymes to the lignin, cellulose, and hemicellulose which leads to degradation of the substrates. Hence, the use of pretreatment for catalysis of lignocellulose substrates is beneficial for the production of cost-efficient and eco-friendly process. In this review, we discussed different pretreatment technologies of hydrolysis and their restrictions. The review has shown that different pretreatments have varying effects on lignin, cellulose, and hemicellulose degradation and biogas yield of different substrate and the choice of pretreatment technique will devolve on the intending final products of the process.

Transformation of lignocellulose to starch-like carbohydrates by organic acid-catalyzed pretreatment and biological detoxification

Corn dry milling provides a mature model for lignocellulose biorefinery process. To copy this technical success, a crucial step is to transform lignocellulose into starch-like carbohydrates (SLC), similar to milled corn grain and in a similar fashion to corn dry milling. The transformation process should be zero wastewater generation and sufficient fermentable sugar conservation; the product should be in solid particle form, free of toxic residues, and high enzymatic hydrolysis yield and fermentability. Here we designed and verified a SLC transformation process by (i) biodegradable oxalic acid-catalyzed pretreatment, and (ii) simultaneous biodegradation of inhibitors and oxalic acid catalyst. The oxalic acid catalyst was effective on disrupting the lignocellulose structure and also biodegradable at low pH value. The biodetoxification fungus Paecilomyces variotii FN89 was capable of degrading the furan/phenolic aldehydes and oxalic acid simultaneously and ultimately, while the fermentable sugars were well preserved. The obtained SLC from wheat straw and corn stover were similar to dry milled corn meal in terms of morphological properties, fermentable sugar contents, enzymatic hydrolysis yield, elemental contents, and free of inhibitors and acid catalyst. The bioconversion of starch-like wheat straw and corn stover produced 78.5 and 75.3 g/L of ethanol (9.9% and 9.5%, v/v) with the yield of 0.47 and 0.45 g ethanol/g cellulose/xylose, respectively, compared with 78.7 g/L (10.0%, v/v) from corn meal and the yield of 0.48 g ethanol/g starch. Mass balances suggest that the ethanol yield, wastewater generation, and elemental recycling of the SLC from lignocellulose were essentially the same as those of corn meal.

Liquefaction of lignocellulosic biomass for methane production: A review

Hydrothermal pretreatment (HTP) (Hot water extraction (HWE) and steam pretreatment) and pyrolysis have the potential to liquefy lignocellulosic biomass. HTP produces hydrolysate, consisting mainly of solubilized hemicellulose, while pyrolysis produces aqueous pyrolysis liquid (APL). The liquid products, either as main products or by-product, can be used as anaerobic digestion (AD) feeds, overcoming shortcomings of solid-state AD (SS-AD). This paper reviews HWE, steam pretreatment, and pyrolysis pretreatment methods used to liquefy lignocellulosic biomass, AD of liquefied products, effects of inhibition from intermediate by-products such as furan and phenolic compounds, and pretreatment tuning to increase methane yield. HTP, focusing on methane production, produces less inhibitory compounds when carried out at moderate temperatures. APL is a challenging feed for AD due to its complexity, including various inhibitory substances. Pre-treatment of biomass before pyrolysis, adaptation of microorganism to inhibitors, and additives, such as biochar, may help the AD cultures cope with inhibitors in APL.

Advances in Pretreatment of Straw Biomass for Sugar Production

Straw biomass is an inexpensive, sustainable, and abundant renewable feedstock for the production of valuable chemicals and biofuels, which can surmount the main drawbacks such as greenhouse gas emission and environmental pollution, aroused from the consumption of fossil fuels. It is rich in organic content but is not sufficient for extensive applications because of its natural recalcitrance. Therefore, suitable pretreatment is a prerequisite for the efficient production of fermentable sugars by enzymatic hydrolysis. Here, we provide an overview of various pretreatment methods to effectively separate the major components such as hemicellulose, cellulose, and lignin and enhance the accessibility and susceptibility of every single component. This review outlines the diverse approaches (e.g., chemical, physical, biological, and combined treatments) for the excellent conversion of straw biomass to fermentable sugars, summarizes the benefits and drawbacks of each pretreatment method, and proposes some investigation prospects for the future pretreatments.

Biosurfactants produced from corncob: a bibliometric perspective of a renewable and promising substrate

The reuse of agro-industrial waste has been a recurring issue since the 20th century. With a composition rich in carbohydrates and because of the massive amount of residue produced daily all over the world, corncob became a low-cost and suitable substrate to produce high added-value compounds. Biosurfactants are bioproducts of versatile applications due to their chemical structure with hydrophilic and hydrophobic regions. The current work performed a bibliometric analysis to identify research related to the synthesis of biosurfactants using corncob as substrate. Despite the high availability of corncobs, only nine articles were found in Scopus and Web of Science using different pretreatment processes and microorganisms. After an initial screening, data regarding research organizations, scientific journals, citations, countries, institutions, and keywords were analyzed. Results indicated that corncobs were also used to produce enzymes, adsorbents, activated carbon, and furfural. The presented evaluation updated the status of art, identifying a serious need for more research, especially because of corncob's high potential to provide fermentable sugars and the wide range of variables influencing fermentation processes that still need to be studied. A future association of this low-cost substrate with other methods can result in a promising scenario for technology transference.

Bioconversion of Renewable Plant Biomass. Second-Generation Biofuels: Raw Materials, Biomass Pretreatment, Enzymes, Processes, and Cost Analysis

The review discusses various aspects of renewable plant biomass conversion and production of the second-generation biofuels, including the types of plant biomass, its composition and reaction ability in the enzymatic hydrolysis, and various pretreatment methods for increasing the biomass reactivity. Conversion of plant biomass into sugars requires the use of a complex of enzymes, the composition of which should be adapted to the biomass type and the pretreatment method. The efficiency of enzymatic hydrolysis can be increased by optimizing the composition of the enzymatic complex and by increasing the catalytic activity and operational stability of its constituent enzymes. The availability of active enzyme producers also plays an important role. Examples of practical implementation and scaling of processes for the production of second-generation biofuels are presented together with the cost analysis of bioethanol production.

Persea Americana Agro-Industrial Waste Biorefinery for Sustainable High-Value-Added Products

Significant problems have arisen in recent years, such as global warming and hunger. These complications are related to the depletion and exploitation of natural resources, as well as environmental pollution. In this context, bioprocesses and biorefinery can be used to manage agro-industrial wastes for obtaining high-value-added products. A large number of by-products are composed of lignin and cellulose, having the potential to be exploited sustainably for chemical and biological conversion. The biorefinery of agro-industrial wastes has applications in many fields, such as pharmaceuticals, medicine, material engineering, and environmental remediation. A comprehensive approach has been developed toward the agro-industrial management of avocado (Persea americana) biomass waste, which can be transformed into high-value-added products to mitigate global warming, save non-renewable energy, and contribute to health and science. Therefore, this work presents a comprehensive review on avocado fruit waste biorefinery and its possible applications as biofuel, as drugs, as bioplastics, in the environmental field, and in emerging nanotechnological opportunities for economic and scientific growth.

Synergism of sweeping frequency ultrasound and deep eutectic solvents pretreatment for fractionation of sugarcane bagasse and enhancing enzymatic hydrolysis

Sugarcane bagasse (SCB) is an abundant agricultural waste in China and the conversion of the waste into plethora of useful resources is very vital. To achieve this, fractionation of the waste is highly important in the biomass biorefinery. The present study aims at investigating the synergistic role of deep eutectic solvents (DES) with sweeping frequency ultrasound (SFUS) and fixed frequency ultrasound (FFUS) in the fractionation of SCB to enhance the enzymatic saccharification process. Therefore, the effects of ultrasound (US) and DES conditions on the pretreatment efficiency were investigated. Under optimum SCB pretreatment conditions, FFUS (40 kHz, 60 min) + DES (choline chloride (ChCl)-lactic acid (LA), 120 °C, 3 h) and SFUS (40 kHz, 60 min) + DES (ChCl-LA, 120 °C, 3 h), the lignin removal rates were 80.13 and 85.62%, respectively. The hemicellulose removal rates were 78.08 and 90.46%, respectively; and the contents of glucose, xylose and arabinose in the liquid fractions after FFUS + DES pretreatment were 7.07, 17.95 and 3.01%, respectively. However, the yield of glucose, xylose, and cellobiose after enzymatic hydrolysis of the SFUS + DES pretreated SCB were 86.76, 38.68, and 20.76%. Analytical studies revealed that the SFUS + DES pretreatment can effectively destroy the ultrastructure of SCB and reduce the crystallinity of cellulose. Furthermore, the mechanism of pretreatment with SFUS + DES was proposed, which confirmed the excellent performance of SFUS + DES. Thus, the application of SFUS + DES pretreatment was able to improve the removal of lignin and hemicellulose from SCBs.

Investigation of choline chloride-formic acid pretreatment and Tween 80 to enhance sugarcane bagasse enzymatic hydrolysis

In this study, a pretreatment that consisting of choline chloride (ChCl) and formic acid (FA) were performed to improve sugarcane bagasse (SCB) enzymatic hydrolysis. Results showed that the ChCl-FA pretreatment exhibited an extraordinary ability to selectively extract hemicellulose (~95.6%) and degrade a large number of lignin (~72.6%) at 110 °C for 120 min, which enhanced the enzymatic hydrolysis of pretreated SCB. Besides, the impact of various additives on pretreated substrate enzymatic hydrolysis confirmed that Tween 80 was the best enzymatic additive, which could significantly improve the glucose produced from pretreated SCB and remarkably reduce the hydrolysis time (from 72 h to 48 h) and enzyme dosage (from 20 FPU/g pretreated solid to 10 FPU/g pretreated solid). In summary, the coupling of ChCl-FA pretreatment and Tween 80 exhibited a promising way to enhance the sugar release from SCB.

Material utilization of green waste: a review on potential valorization methods

Considering global developments like climate change and the depletion of fossil resources, the use of new and sustainable feedstocks such as lignocellulosic biomass becomes inevitable. Green waste comprises heterogeneous lignocellulosic biomass with low lignin content, which does not stem from agricultural processes or purposeful cultivation and therefore mainly arises in urban areas. So far, the majority of green waste is being composted or serves as feedstock for energy production. Here, the hitherto untapped potential of green waste for material utilization instead of conventional recycling is reviewed. Green waste is a promising starting material for the direct extraction of valuable compounds, the chemical and fermentative conversion into basic chemicals as well as the manufacturing of functional materials like electrodes for electro-biotechnological applications through carbonization. This review serves as a solid foundation for further work on the valorization of green waste.

Breeding Targets to Improve Biomass Quality in Miscanthus

Lignocellulosic crops are attractive bioresources for energy and chemicals production within a sustainable, carbon circular society. Miscanthus is one of the perennial grasses that exhibits great potential as a dedicated feedstock for conversion to biobased products in integrated biorefineries. The current biorefinery strategies are primarily focused on polysaccharide valorization and require severe pretreatments to overcome the lignin barrier. The need for such pretreatments represents an economic burden and impacts the overall sustainability of the biorefinery. Hence, increasing its efficiency has been a topic of great interest. Inversely, though pretreatment will remain an essential step, there is room to reduce its severity by optimizing the biomass composition rendering it more exploitable. Extensive studies have examined the miscanthus cell wall structures in great detail, and pinpointed those components that affect biomass digestibility under various pretreatments. Although lignin content has been identified as the most important factor limiting cell wall deconstruction, the effect of polysaccharides and interaction between the different constituents play an important role as well. The natural variation that is available within different miscanthus species and increased understanding of biosynthetic cell wall pathways have specified the potential to create novel accessions with improved digestibility through breeding or genetic modification. This review discusses the contribution of the main cell wall components on biomass degradation in relation to hydrothermal, dilute acid and alkaline pretreatments. Furthermore, traits worth advancing through breeding will be discussed in light of past, present and future breeding efforts.

Thermochemical liquefaction of agricultural and forestry wastes into biofuels and chemicals from circular economy perspectives

Waste produced in various fields and activities in society has been increasing, thereby causing immediate environmental harm and a serious-global problem. Recently, the attitude towards waste has changed along with innovations making waste as a new resource. Agricultural and forestry wastes (AFWs) are globally produced in huge amounts and thought to be an important resource to be used for decreasing the dependence on fossil fuels. The central issue is to take use of AFW for different types of products making it a source of energy and at the same time refining it for the production of valuable chemicals. In this review, we present an overview of the composition and pretreatment of AFWs, thermochemical liquefaction including direct liquefaction and indirect liquefaction (liquid products from syngas by gasification) for producing biofuels and/or chemicals. The following two key points were discussed in-depth: the solvent or medium of thermochemical conversion and circular economy of liquid products. The concept of bio-economy entails economic use of waste streams, leading to the widened assessment of biomass use for energy where sustainability is a key issue coined in the circular economy. The smart use of AFWs requires a combination of available waste streams and local technical solutions to meet sustainability criteria.

Biological and Pharmacological Potential of Xylitol: A Molecular Insight of Unique Metabolism

Xylitol is a white crystalline, amorphous sugar alcohol and low-calorie sweetener. Xylitol prevents demineralization of teeth and bones, otitis media infection, respiratory tract infections, inflammation and cancer progression. NADPH generated in xylitol metabolism aid in the treatment of glucose-6-phosphate deficiency-associated hemolytic anemia. Moreover, it has a negligible effect on blood glucose and plasma insulin levels due to its unique metabolism. Its diverse applications in pharmaceuticals, cosmetics, food and polymer industries fueled its market growth and made it one of the top 12 bio-products. Recently, xylitol has also been used as a drug carrier due to its high permeability and non-toxic nature. However, it become a challenge to fulfil the rapidly increasing market demand of xylitol. Xylitol is present in fruit and vegetables, but at very low concentrations, which is not adequate to satisfy the consumer demand. With the passage of time, other methods including chemical catalysis, microbial and enzymatic biotransformation, have also been developed for its large-scale production. Nevertheless, large scale production still suffers from high cost of production. In this review, we summarize some alternative approaches and recent advancements that significantly improve the yield and lower the cost of production.

Torrefaction at 200 °C of Pubescens Pretreated with AlCl3 Aqueous Solution at Room Temperature

Metal salt soaking-torrefaction conversion technology was investigated. It was found that AlCl₃ pretreatment of pubescens favored observably the yield of liquid and small-molecular products in torrefaction via changing the composition and structure of the raw material. The maximum conversion of pretreated samples, washed (PSW) and Y _liquid were 15.5 and 10.8 wt % (with 0.26 wt % monosaccharides, 0.26 wt % carboxylic acids, 0.38 wt % furan compounds, and 1.28 wt % phenols), where 20.4 wt % hemicellulose, 22.9 wt % cellulose, and 5.7 wt % lignin were converted, respectively. However, for pretreated samples (PS), the maximum conversion and Y _liquid reached 44.2 and 32.1 wt %, respectively, along with 96.0 wt % hemicellulose and 31.8 wt % cellulose converted, yielding 2.39 wt % monosaccharides, 5.14 wt % carboxylic acids, 2.60 wt % furan compounds and 10.52 wt % phenols, indicating obvious catalytic effects of residual AlCl₃ on the decomposition of the three major components in torrefaction. Two-dimensional HSQC and electrospray ionization mass spectrometry (ESI-MS) characterizations further confirmed the dominant formation of oligomers derived from holocellulose, lignin, and cross-linkage involving the lignin-carbohydrate complex, indicating that the catalytic thermal cleavage of β-O-4, C-O-C, β-β, 5-5, 4-O-5, C_α-C_β, and α-O-4 linkages by aluminum species in the samples benefited the yield of liquid as well as monophenols.

Transformation of pulp and paper mill sludge (PPMS) into a glucose-rich hydrolysate using green chemistry: Assessing pretreatment methods for enhanced hydrolysis

Pulp and paper mill sludge is a waste stream derived from the pulp and paper making industry, comprised of organic and inorganic material in the form of cellulose, hemicellulose, lignin and ash. In South Africa, approximately fivefour hundred thousand wet tonnes are produced per annum and is currently disposed via landfilling or incineration. However, these disposal methods raise environmental and financial concerns. This waste stream is an attractive feedstock for fermentable sugars, mainly glucose, recovery and can be redirected for valorisation as a feedstock for microbial fermentation to produce value-added products. Sugar recovery by enzymatic hydrolysis, as opposed to acidic hydrolysis, is a promising approach but is hampered by the lignin and inorganic material found in pulp and paper mill sludge. Several treatment steps to reduce or remove these components prior to enzymatic hydrolysis are assessed in this review. Pretreatment improves hydrolysis of cellulosic fibres and ensures a substantial yield of sugars.

Novel Synergistic Mechanism for Lignocellulose Degradation by a Thermophilic Filamentous Fungus and a Thermophilic Actinobacterium Based on Functional Proteomics

Effective artificial microbial consortia containing microorganisms with desired biological functions have the potential to optimize the lignocellulose-based bioindustry. Thermobifida fusca was a dominant actinobacterium in high-temperature corn stalk composts, but it was unable to grow alone in corn stalk solid medium. Interestingly, T. fusca showed good growth and secreted enzymes when cocultured with Thermomyces lanuginosus. T. lanuginosus grew firstly during the initial stage, whereas T. fusca dominated the system subsequently during cocultivation. The secretome indicated that T. lanuginosus mainly degraded xylan by expressing a GH11 xylanase (g4601.t1, GenBank AAB94633.1; with relative secretion of 4.95 ± 0.65%). T. fusca was induced by xylan mainly to secrete a xylanase from GH11 family (W8GGR4, GenBank AHK22788.1; with relative secretion of 8.71 ± 3.83%) which could rapidly degrade xylan to xylo-oligosaccharide (XOS) and xylose within 2 min, while high concentrations (>0.5%, w/v) of XOS or xylose suppressed the growth of T. fusca; which may be the reason why T. fusca unable to grow alone in corn stalk solid medium. However, T. lanuginosus could utilize the XOS and xylose produced by xylanases secreted by T. fusca. During the synergistic degradation of lignocellulose by T. lanuginosus and T. fusca, xylan was rapidly consumed by T. lanuginosus, the residual cellulose could specifically induced T. fusca to express a GH10 xylanase with a CBM2 domain (Q47KR6, GenBank AAZ56956.1; with relative secretion of 5.03 ± 1.33%) and 6 cellulases (2 exocellulases and 4 endocellulases). Moreover, T. lanuginosus increased the secretion of cellulases from T. fusca by 19-25%. The order of T. lanuginosus and T. fusca was consistent with the multilayered structures of lignocellulose and could be regulated by different concentrations of XOS and xylose. The novel synergism of T. lanuginosus and T. fusca gave a new sight for revealing more synergetic relationships in natural environments and exploring efficient microbial inoculants and enzyme cocktails for lignocellulose degradation.

Effect of alkaline and alkaline-photocatalytic pretreatment on characteristics and biogas production of rice straw

To overcome recalcitrant nature and investigate enhancement of biogas production of rice straw (RS), it was subjected to pretreatment under mild conditions. Alkaline pretreatment using sodium hydroxide (NaOH), photocatalytic pretreatment utilizing titania nanoparticles (TiO₂ NPs) and alkaline-photocatalytic pretreatment was used to disrupt the lignocellulose complex. As compared to raw RS, maximum biogas and methane enhancement due to alkaline pretreatment was observed for 1.5% w/v NaOH pretreated RS which was 50 and 71% respectively. Photocatalytic pretreatment of RS at 0.25 g/L TiO₂ increased biogas and methane yield by 30 and 36% respectively. However, maximum biogas and methane enhancement was observed for alkaline-photocatalytic pretreatment at 1.5% w/v NaOH-0.25 g/L TiO₂ which was 74 and 122% respectively. Comparatively high enhancements were observed during alkaline-photocatalytic combined pretreatment due to increased cellulose and decreased lignin content. Moreover, the experimental data obtained from the experiments were validated using a non-linear kinetic model.