Biomass, lipid productivities and fatty acids composition of marine Nannochloropsis gaditana cultured in desalination concentrate

Nannochloropsis as an Emerging Algal Chassis for Light-Driven Synthesis of Lipids and High-Value Products

In light of the escalating global energy crisis, microalgae have emerged as highly promising producers of biofuel and high-value products. Among these microalgae, Nannochloropsis has received significant attention due to its capacity to generate not only triacylglycerol (TAG) but also eicosapentaenoic acid (EPA) and valuable carotenoids. Recent advancements in genetic tools and the field of synthetic biology have revolutionized Nannochloropsis into a powerful biofactory. This comprehensive review provides an initial overview of the current state of cultivation and utilization of the Nannochloropsis genus. Subsequently, our review examines the metabolic pathways governing lipids and carotenoids, emphasizing strategies to enhance oil production and optimize carbon flux redirection toward target products. Additionally, we summarize the utilization of advanced genetic manipulation techniques in Nannochloropsis. Together, the insights presented in this review highlight the immense potential of Nannochloropsis as a valuable model for biofuels and synthetic biology. By effectively integrating genetic tools and metabolic engineering, the realization of this potential becomes increasingly feasible.

Phenol phycoremediation by Haematococcus pluvialis coupled with enhanced astaxanthin and lipid production under rac-GR24 supplementation for enhanced biodiesel production

The present study evaluated the impact of rac-GR24 on biomass and astaxanthin production under phenol stress coupled with biodiesel recovery from Haematococcus pluvialis. Phenol supplementation showed negative impact on growth, where the lowest biomass productivity of 0.027 g L^-1 day^-1 was recorded at 10 µM phenol, while 0.4 µM rac-GR24 supplementation showed the highest recorded biomass productivity of 0.063 g L^-1 day^-1. Coupling 0.4 µM rac-GR24 at different phenol concentrations confirmed the potential of rac-GR24 to mitigate the toxic effect of phenol by enhancing yield of PSII yield, RuBISCo activity, and antioxidant efficiency, which resulted in improved phenol phycoremediation efficiency. In addition, results suggested a synergistic action by rac-GR24 supplementation under phenol treatment where rac-GR24 enhanced lipid accumulation, while phenol enhanced astaxanthin production. Dual supplementation of rac-GR24 and phenol showed the highest recorded FAMEs content, which was 32.6% higher than the control, with improved biodiesel quality. The suggested approach could enhance the economic feasibility of triple-purpose application of microalgae in wastewater treatment, astaxanthin recovery, and biodiesel production.

An overview on microalgae as renewable resources for meeting sustainable development goals

The increased demands and dependence on depleted oil reserves, accompanied by global warming and climate change have driven the world to explore and develop new strategies for global sustainable development. Among sustainable biomass sources, microalgae represent a promising alternative to fossil fuel and can contribute to the achievement of important Sustainable Development Goals (SDGs). This article has reviewed the various applications of microalgal biomass that includes (i) the use in aquaculture and its sustainability; (ii) commercial value and emerging extraction strategies of carotenoids; (iii) biofuels from microalgae and their application in internal combustion engines; (iv) the use and reuse of water in microalgae cultivation; and (v) microalgae biotechnology as a key factor to assist SDGs. The future prospects and challenges on the microalgae circular bio economy, issues with regard to the scale-up and water demand in microalgae cultivation are also highlighted.

Maximization of growth and lipid production of a toxic isolate of Anabaena circinalis by optimization of various parameters with mathematical modeling and computational validation

Toxic cyanobacterial blooms are recurrent for few decades throughout the globe, due to climate change, atmospheric warming and various anthropogenic activities with severe impacts of potential toxins on various ecosystems finally affecting the entire environment. These cyanobacteria are merely unexplored regarding their biochemical components except toxins. Variable influences and interactions of different factors including nitrogen, carbon, and availability of light are well known to crucially regulate cyanobacterial growth and metabolism. Thus, current research work is motivated for the evaluation and optimization of the effects of the aforementioned vital factors for improvement of biomass and lipid production of a freshwater, toxic strain of Anabaena circinalis. The modelling and optimization of factors such as nitrogen, light intensity and bicarbonate concentration (source of carbon) to maximize growth and lipid production were based on 20 design point experiments by Response Surface Methodology (RSM) and optimized values were further improved and validated by Particle Swarm Optimization (PSO) algorithm. The maximum optima were obtained 1.829 g L^-1 and 39.64 % for biomass production and lipid content respectively from PSO optimization with two different sets of optimal values of factors. It shows 0.44 % and 2.77 % higher values of responses than that of RSM optimization. These asynchronous findings pioneered the enhanced lipid accumulation as well as the growth of a toxic cyanobacterium by optimizing interaction effects of culture conditions through various statistical and computational approaches.

Use of reverse osmosis reject from drinking water plant for microalgal biomass production

The present study evaluates the use of reverse osmosis (RO) reject, termed as ROR, for microalgal biomass production. The supplementation of ROR from two different sources, namely domestic RO unit (ROR1) and commercial-scale RO plant (ROR2), showed a synergistic effect on the growth and biochemical composition of Chlorella pyrenoidosa. Among the tested ROR1 doses, the highest biomass production (1.27±0.06 g L^-1) was observed with 25% ROR1 supplemented growth media. In contrast, the lipid content (28.85±3.13% of TS) in C. pyrenoidosa at 50% ROR1 dose was almost twice that in BG11 (positive control). Interestingly, the microalgae showed relatively higher biomass production (1.37±0.07 g L^-1) and higher lipid content (33.23±3.92% of TS) when 50% ROR2 was used in growth media. At the same time, the estimated carbohydrate and protein contents were 28.41±0.73 and 29.75±0.31% of TS, respectively. Furthermore, the lipid productivity (28.98±2.79 mg L^-1 d^-1) was relatively higher than the nutrient media (12.35±1.34 mg L^-1 d^-1). The present findings revealed that the RO reject from drinking water purifiers can efficiently be utilized for lipid-rich microalgal biomass production. Hence, the dependency on freshwater resources for mass scale microalgae cultivation through recycling of RO reject can be reduced.

Improving the feasibility of aquaculture feed by using microalgae

The aquaculture industry is an efficient edible protein producer and grows faster than any other food sector. Therefore, it requires enormous amounts of fish feed. Fish feed directly affects the quality of produced fish, potential health benefits, and cost. Fish meal (FM), fis oil (FO), and plant-based supplements, predominantly used in fish feed, face challenges of low availability, low nutritional value, and high cost. The cost associated with aquaculture feed represents 40-75% of aquaculture production cost and one of the key market drivers for the thriving aquaculture industry. Microalgae are a primary producer in aquatic food chains. Microalgae are expanding continuously in renewable energy, pharmaceutical pigment, wastewater treatment, food, and feed industries. Major components of microalgal biomass are proteins with essential amino acids, lipids with polyunsaturated fatty acids (PUFA), carbohydrates, pigments, and other bioactive compounds. Thus, microalgae can be used as an essential, viable, and alternative feed ingredient in aquaculture feed. In recent times, live algae culture, whole algae, and lipid-extracted algae (LEA) have been tested in fish feed for growth, physiological activity, and nutritional value. The present review discusses the potential application of microalgae in aquaculture feed, its mode of application, nutritional value, and possible replacement of conventional feed ingredients, and disadvantages of plant-based feed. The review also focuses on integrated processes such as algae cultivation in aquaculture wastewater, aquaponics systems, challenges, and future prospects of using microalgae in the aquafeed industry.

A comparative assessment of growth, pigment and enhanced lipid production by two toxic freshwater cyanobacteria Anabaena circinalis FSS 124 and Cylindrospermopsis raciborskii FSS 127 under various combinations of nitrogen and phosphorous inputs

Nitrogen and phosphorous are important nutritional regulators for the growth of cyanobacteria, thereby having a significant impact in bloom formation by toxic species. Usage of toxic cyanobacteria for increasing valuable metabolite production by nutrient manipulation is still unexplored. Hence, the current work is aimed to estimate and compare growth, pigment, and increased lipid production coupled with the identification of fatty acids between two toxic strains-Anabaena circinalis FSS 124 and Cylindrospermopsis raciborskii FSS 127 under various combinations of these two nutrients. Low level of nitrogen and phosphorous enhanced lipid content in both strains (˃ 20% and 30% respectively) and C. raciborskii, respectively. Lipid productivity in low phosphorous concentration (P0.5) was achieved significantly high in C. raciborskii. Similarly, a substantial amount of carotenoids was obtained at reduced nitrogen and phosphorous in C. raciborskii accompanied by lessened growth and Chl a concentration. Unlikely, enough biomass (˃ 2 g L^-1) was produced at high nutrient levels in both species. Comparative statistical significance (p < 0.05) was found between two species regarding biomass production, chlorophyll concentration, lipid content, and productivity and between these factors in each species under both nutrient variations. FAME of Cylindrospermopsis is composed of saturated fatty acids (˃ 50%) and MUFA (˃ 25%) while Anabaena contains PUFA (˃ 21%) additionally. However, the study highlights C. raciborskii as potential lipid and carotenoid producer at nutrient stress and finds a novel way to utilize these cyanobacterial biomasses, which cause immense environmental hazards and life threats.

Lipid Production Capacity of a Newly Characterized Cyanobacterial Strain Synechocystissp. MH01: A Comparative Performance Evaluation of Cyanobacterial Lipid-Based Biodiesel

Background:

Cyanobacteria have been the focus of extensive researches because of their high potential for the development of new generations of useful natural compounds with vast applications. For the entire last ten years, a lot of attention has been dedicated to the cyanobacterial lipids as a main source of valuable materials for clean energy production.

Objectives:

As there is a direct relationship between biofuel properties and compositional characteristics of fatty acids, a selected lipid-producing cyanobacterial strain was examined and analyzed in terms of fatty acid composition. The biodiesel quality parameters were carefully examined as well.

Materials and Methods:

A cyanobacterial strain was isolated from waterfalls in the northern part of Iran and identified as Synechocystis sp. MH01. The fatty acids profile of the selected strain, as tested in various culture conditions, was analyzed by gas chromatography (GC) and compared with control subjects to further validating the biodiesel quality parameters.

Results:

The autotrophic cultivation of Synechocystissp. MH01 resulted in biomass and lipid productivity of 109 mg.L^-1 day^-1 and 22.89 mg.L^-1 day^-1, respectively. The mixotrophic cultivation of MH01 strain in sucrose-containing medium led to an approximately 1.8 and 1.22 fold increase in biomass and lipid productivity compared with the autotrophic condition. The addition of glycine to BG11 medium caused up to ~1.3 and ~1.18 fold increase in biomass and lipid productivity compared with control subjects. The analysis of qualitative parameters of the biodiesel, as derived from the lipids, indicated that Synechocystis sp. MH01 has a high ability for lipid production under optimal culture conditions

Conclusions:

It seems feasible to evolve the Synechocystissp. MH01 further particularly for more lipid production as a promising primary raw material for biofuel production through fine-tuning of medium composition

Scale-Up Cultivation of Phaeodactylum tricornutum to Produce Biocrude by Hydrothermal Liquefaction

Phaeodactylum tricornutum is an interesting source of biomass to produce biocrude by hydrothermal liquefaction (HTL). Its biochemical composition, along with its biomass productivity, can be modulated according to this specific application by varying the photoperiod, the addition of CO2 or the variation of the initial nitrate concentration. The lab-scale culture allowed the production of a P. tricornutum biomass with high biomass and lipid productivities using a 18:6 h light:dark photoperiod and a specific CO2 injection. An initial concentration of nitrates (11.8 mM) in the culture was also essential for the growth of this species at the lab scale. The biomass generated in the scale-up photoreactor had acceptable biomass and lipid productivities, although the values were higher in the biomass cultivated at the lab scale because of the difficulty for the light to reach all cells, making the cells unable to develop and hindering their growth. The biocrudes from a 90-L cultivated microalga (B-90L) showed lower yields than the ones obtained from the biomass cultivated at the lab scale (B-1L) because of the lower lipid and high ash contents in this biomass. However, the culture scaling-up did not affect significantly the heteroatom concentrations in the biocrudes. A larger-scale culture is recommended to produce a biocrude to be used as biofuel after a post-hydrotreatment stage.

Enhancement of biodiesel yield from a halophilic green microalga isolated under extreme hypersaline conditions through stepwise salinity adaptation strategy

In the present study, a halophilic microalgal species was isolated from a hypersaline lagoon with salinity average of 45.3‰ and identified as Dunaliella salina KSA-HS022. It was further cultivated at a salinity range of 50-250‰, applied directly to batch cultures or through stepwise increase in a semi-continuous culture. The later showed the highest biomass productivity of 0.191 g L^-1 d^-1 at 125‰, which represented 45.8% higher than the corresponding batch culture (control). Oxidative markers in the control cultures were significantly higher than those of the adapted culture, confirming reduction of oxidative stress by adaptation. In addition, stepwise adaptation showed the highest lipid productivity of 56.5 mg L^-1 d^-1 at 150‰ (39.9% higher than the corresponding control), which resulted in the highest fatty acid methyl esters productivity. Moreover, stepwise increase of salinity up to 150‰ enhanced the biodiesel characteristics, offering a new route for enhanced biodiesel production at extraordinary salinity levels.

Optimization of Subcritical Water Extraction (SWE) of Lipid and Eicosapentaenoic Acid (EPA) from Nannochloropsis gaditana

Microalgae are a promising source of omega-3. The purpose of this study was to extract lipid with a relatively high content of eicosapentaenoic acid (EPA) from Nannochloropsis gaditana using subcritical water extraction (SWE). The effects of different temperatures (156.1-273.9°C), extraction times (6.6-23.4 minutes), and biomass loadings (33-117 g algae/L) on the extraction yield were studied. From the optimization study using central composite design (CCD), quadratic models generated for lipid yield and EPA composition were considered to be significant models (p < 0.05). The predictive equations were also formed for lipid yield and EPA composition. The predicted optimum lipid yield and EPA composition at 236.54°C, 13.95 minutes, and 60.50 g algae/L were 18.278 wt% of total biomass and 14.036 wt% of total fatty acid methyl ester (FAME), respectively.

Sequential adaptation of Nannochloropsis gaditana to table olive processing water

The main objective of this study was to evaluate the suitability of Nannochloropsis gaditana to grow by sequential adaptation to TOPW (Table olive processing water) at increased substrate concentrations (10-80%). Sequential adaptation allows growing Nannochloropsis gaditana up to 80% TOPW, although the maximum microalgae biomass productions were achieved for percentages of 20-40%, i.e. 0.308 ± 0.005 g VSS (Volatile Suspended Solids)/L. In all growth experiments, proteins were the majority compound in the grown microalgae biomass (0.44 ± 0.05 g/g VSS), whereas phenols were retained up to a mean concentration of 12.1 ± 1.9 mg total phenols/g VSS. The highest microalgae biomass production rate at rate of 80% TOPW took place in the first two days when most nutrients were also removed. Average removal efficiencies at this percentage of TOPW were 69.1%, 50.9%, 54.3% and 71.8% for total organic carbon, total soluble nitrogen, phosphate and total phenols, respectively. Sequential adaptation can ensure the obtaining of a sustainable microalgae culture as a treatment method for TOPW.

Effects of different photoperiod and trophic conditions on biomass, protein and lipid production by the marine alga Nannochloropsis gaditana at optimal concentration of desalination concentrate

This study investigated the cultivation of the marine alga Nannochloropsis gaditana in a medium based on desalination concentrate (DC) with an optimal concentration of 75% DC, under three trophic conditions and four photoperiod schedules. N. gaditana produced a peak biomass concentration (1.25gL^-1) under mixotrophic culture condition and a photoperiod of 16L:08D. N. gaditana cells compensate to different light-dark regimes producing different amounts of protein (17.9-44.8%). The intracellular lipid content in N. gaditana cells increased both under autotrophic conditions with a 16L:08D cycle (16.7%), and under mixotrophic conditions with a 08L:16D cycle (15.7%). In heterotrophic culture, N. gaditana cells were rich in polyunsaturated fatty acids (46.0%). This study demonstrates an alternative approach to enhancing intracellular lipid content of the marine alga N. gaditana by modifying the photoperiod, trophic conditions and stress-salinity-conductivity with the use of a DC-based medium.

Augmentation of arsenic enhances lipid yield and defense responses in alga Nannochloropsis sp

The present study was conducted with microalga Nannochloropsis sp. to evaluate its tolerance responses and biofuel perspectives under different arsenic regime (0-1000μM As(III)). Results showed that optimal biomass (61.00±3.72mg/L/d) and lipid productivity (20.27mg/L/d) were obtained in culture treated with 100μM As(III) in comparison to other treatments. In addition, fatty acid profile of alga was in accordance with European biodiesel standards (EN 14214), which reflects good oxidative stability of oil. High antioxidants viz., ascorbic acid, GSH and cysteine tolerance responses as well as lipid yield at 100μM As(III), opens a new insight in the field of algal biology. Thus, microalgae Nannochloropsis sp. may be employ in remediation as well as biodiesel production.

Evaluation of fatty acid profile and biodiesel properties of microalga Scenedesmus abundans under the influence of phosphorus, pH and light intensities

The present study dealt with biomass, lipid concentration, fatty acid profile and biodiesel properties of microalga Scenedesmus abundans under different phosphate concentrations, pH and light intensities, one at a time. Among different phosphate concentrations, higher biomass (770.10±11.0mg/L) and lipid concentration (176.87±4.6mg/L) were at the concentration of 60mg/L. Light intensity at 6000lux yielded higher biomass and lipid concentration of 742.0±9.7 and 243.15±9.1mg/L, respectively. The biomass (769.0±12.3mg/L) and lipid (179.47±5.5mg/L) concentration were highest at pH 8 and pH 6, respectively. All the culture treatments showed marked effect on the fatty acid profile and biodiesel properties of the extracted oil. FAME derived biodiesel properties were compared with European biodiesel standards (EN 14214), Indian biodiesel standards (IS 15607) and American biodiesel standards (ASTM D 6751-08) to assess the suitability of algal oil as biodiesel feedstock.