Comprehensive comparison of bacterial communities in a membrane-free bioelectrochemical system for removing different mononitrophenols from wastewater

Review of cathodic electroactive bacteria: Species, properties, applications and electron transfer mechanisms

Cathodic electroactive bacteria (C-EAB) which are capable of accepting electrons from solid electrodes provide fresh avenues for pollutant removal, biosensor design, and electrosynthesis. This review systematically summarized the burgeoning applications of the C-EAB over the past decade, including 1) removal of nitrate, aromatic derivatives, and metal ions; 2) biosensing based on biocathode; 3) electrosynthesis of CH4, H2, organic carbon, NH3, and protein. In addition, the mechanisms of electron transfer by the C-EAB are also classified and summarized. Extracellular electron transfer and interspecies electron transfer have been introduced, and the electron transport mechanism of typical C-EAB, such as Shewanella oneidensis MR-1, has been combed in detail. By bringing to light this cutting-edge area of the C-EAB, this review aims to stimulate more interest and research on not only exploring great potential applications of these electron-accepting bacteria, but also developing steady and scalable processes harnessing biocathodes.

Self-forming electroactive dynamic membrane for enhancing the decolorization of methyl orange by weak electrical stimulation

An electroactive dynamic membrane (EADM), which enabled simultaneous solid-liquid separation and contaminants removal, has been developed by electrostimulation using domestic wastewater as inoculum. Results showed that both the control dynamic membrane (CDM), without electrical stimulation, and the EADM systems exhibited stable removal performance with chemical oxygen demand (COD), and a robustness in responding to a fluctuating organic load. With the introduction of a weak electrical field, the EADM transmembrane pressure (TMP) was significantly reduced (0.02 kPa/d) compared with the control (0.20 kPa/d). In the treatment of methyl orange (MO), the EADM system achieved a decolorization efficiency of 85.87 %, much higher than the control dynamic membrane (CDM) system (58.84 %), which can be attributed to electrical stimulation and H₂ production on cathode. Microbial analysis has established that electrostimulation enriched the electroactive bacteria in the dynamic biofilm, and shaped the microbial structure, with improved contaminant removal. The results of this study highlight the potential of regulating the microbial community and creating a beneficial biofilm as a dynamic layer to facilitate contaminant removal.

A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes

Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.

Regulating the dechlorination and methanogenesis synchronously to achieve a win-win remediation solution for γ-hexachlorocyclohexane polluted anaerobic environment

The wish for rapid degradation of chlorinated organic pollutants along with the increase concern with respect to greenhouse effect and bioenergy methane production have created urgent needs to explore synchronous regulation approach. Microbial electrolysis cell was established under four degressive cathode potential settings (from -0.15V to -0.60V) to regulate γ-hexachlorocyclohexane (γ-HCH) reduction while CH₄ cumulation in this study. The synchronous facilitation of γ-HCH reduction and CH₄ cumulation was occurred in -0.15V treatment while the facilitation of γ-HCH reductive removal together with the inhibition of CH₄ cumulation was showed in -0.30V treatment. Electrochemical patterns via cyclic voltammetry and morphological performances via scanning electron microscopy illustrated bioelectrostimulation promoted redox reactions and helped to construct mature biofilms located on bioelectrodes. Also, bioelectrostimulated regulation pronouncedly affected the bacteria and archaeal communities and subsequently assembled distinctly core sensitive responders across bioanode, biocathode and plankton. Clostridum, Longilinea and Methanothrix relatively accumulated in the plankton, and Cupriavidus and Methanospirillum, and Perimonas and Nonoarcheaum in biocathode and bioanode, respectively; while Pseudomonas, Stenotrophomonas, Methanoculleus and Methanosarcina were diffusely enriched. Microbial interactions in the ecological network were more complicated in -0.15V and -0.30V cathodic potential treatments, coincident with the increasement of γ-HCH reduction. The co-existence between putative dechlorinators and methanogens was less significant in -0.30V treatment when compared to that in -0.15V treatment, relevant with the variations of CH₄ cumulation. In all, this study firstly corroborated the availability to synchronously regulate γ-HCH reductive removal and methanogenesis. Besides, it paves an advanced approach controlling γ-HCH reduction in cooperation with CH₄ cumulation, of which to achieve γ-HCH degradation facilitation along with biogas (CH₄) production promotion with -0.15V cathode potential during anaerobic γ-HCH contaminated wastewater digestion, or to realize γ-HCH degradation facilitation with the inhibition of CH₄ emission with -0.30V cathode potential for an all-win remediation in γ-HCH polluted anaerobic environment such as paddy soil.

Anaerobic semi-fixed bed biofilm reactor (An-SFB-BR) for treatment of high concentration p-nitrophenol wastewater under shock loading conditions

P-nitrophenol (PNP or 4-NP) has been widely used as a biorefractory raw material in chemical industry, whereas been highly concerned for its characteristics of mutagenic/carcinogenic activity and food chain bioaccumulation. In this study, an anaerobic semi-fixed bed biofilm reactor (An-SFB-BR) was constructed and used to treat PNP wastewater which discharged from chemical industries. Experimental results revealed that the An-SFB-BR was successfully cultivated with the gradually increasing of influent PNP from 0 to 540 mg/L (gradually increased 10 mg/L every time in stage II and 30-50 mg/L for stage III), with the observation of an average removal efficiency of 98% for PNP and 80% for chemical oxygen demand (COD), also a biogas production and biogas production rate of 2.1 L/(L·d) and 0.57 m³/kg-COD, respectively. Finally, the conversion rate of P-aminophenol (PAP), the primary intermediate of PNP reached 80% after An-SFB-BR biodegradation. A relatively stable pH was maintained throughout the entire process, and insignificant VFA accumulation. The reactor exhibited a strong toxic shock resistance, and 16S rRNA sequencing results demonstrated that the dominant microbial community changed slightly with the gradually increasing of PNP concentration, which guaranteed the PNP removal efficiency.

Effect of waterproof breathable membrane based cathodes on performance and biofilm microbiomes in bioelectrochemical systems

A novel method for fabricating air-cathodes was developed by assembling an activated carbon (AC) catalyst together with a waterproof breathable membrane (WBM) and stainless steel mesh (SSM) to reduce manufacturing costs of bioelectrochemical systems (BESs). WBMs made of different materials were tested in the assembly, including a hybrid of polypropylene and polyolefin (PPPO), polyethylene (PE), and polyurethane (PU), and compared against poly tetrafluoroethylene (PTFE)-based cathodes. Results showed that the maximum power density of the activated carbon-stainless steel mesh-polyurethane (AC@SSM/PU) assembly was 2.03 W/m² while that of conventional carbon cloth cathode assembly (Pt@CC/PTFE) was 1.51 W/m². Compared to conventional cathode fabrication, AC@SSM/PU had a much lower cost and simpler manufacturing process. Illumina Miseq sequencing of 16S rRNA gene amplicons indicated that microbiomes were substantially different between anode and cathode biofilms. There was also a difference in the community composition between different cathode biofilms. The predominant population in the anode biofilms was Geobacter (38-75% relative abundance), while Thauera and Pseudomonas dominated the cathode biofilms. The results demonstrated that different types of air-cathodes influenced the microbial community assembly on the electrodes.

Operation mechanism of constructed wetland-microbial fuel cells for wastewater treatment and electricity generation: A review

Constructed wetland-microbial fuel cells (CWL-MFCs) are eco-friendly and sustainable technology, simultaneously implementing contaminant removal and electricity production. According to intensive research over the last five years, this review on the operation mechanism was conducted for in-depth understanding and application guidance of CWL-MFCs. The electrochemical mechanism based on anodic oxidation and cathodic reduction is the core for improved treatment in CWL-MFCs compared to CWLs. As the dominant bacterial community, the abundance and gene-expression patterns of electro-active bacteria responds to electrode potentials and contaminant loadings, further affecting operational efficiency of CWL-MFCs. Plants benefit COD and N removal by supplying oxygen for aerobic degradation and rhizosphere secretions for microorganisms. Multi-electrode configuration, carbon-based electrodes and rich porous substrates affect transfer resistance and bacterial communities. The possibilities of CWL-MFCs targeting at recalcitrant contaminants like flame retardants and interchain interactions among effect components need systematic research.

Enhanced wastewater treatment with high o-aminophenol concentration by two-stage MABR and its biodegradation mechanism

A two-stage bench-scale membrane-aerated biofilm reactor (MABR) was developed to treat wastewater containing high o-aminophenol (OAP) content. Long-term process showed that MABR-1 can achieve the removal rates of 17.6 g OAP/m² d and 29.4 g COD/m² d. MABR-2 can effectively perform more than 90% TN removal with the addition of external glucose. Pseudomonas and Nitrosomonas were the key functional genera in MABR-1 and MABR-2, respectively. Functional genes related to OAP degradation, including amnA,B,D, dmpC,H, mhpD,E,F, and bphH,I,J, were detected, and the involved enzymes were predicted. The OAP-degrading species and functional contribution analysis indicated that OAP can be metabolized by a single Pseudomonas or by the synergistic effects of bacteria, mainly including Cupriavidus, Thauera, unclassified Sphingomonadaceae, Lysobacter, and Azotobacter or by the cooperation of all the bacteria above. These diversified patterns guaranteed the high efficiency for OAP removal in MABR when treating wastewater with high OAP concentration.

Functional group surface modifications for enhancing the formation and performance of exoelectrogenic biofilms on the anode of a bioelectrochemical system

Various new energy technologies have been developed to reduce reliance on fossil fuels. The bioelectrochemical system (BES), an integrated microbial-electrochemical energy conversion process, is projected to be a sustainable and environmentally friendly energy technology. However, low power density is still one of the main limiting factors restricting the practical application of BESs. To enhance power output, functional group modification on anode surfaces has been primarily developed to improve the bioelectrochemical performances of BESs in terms of startup, power density, chemical oxygen demand (COD) removal and coulombic efficiency (CE). This modification could change the anode surface characteristics: roughness, hydrophobicity, biocompatibility, chemical bonding and electrochemically active surface area. This will facilitate bacterial adhesion, biofilm formation and extracellular electron transfer (EET). Additionally, some antibacterial functional groups are applied on air cathodes in order to suppress aerobic biofilms and enhance cathodic oxygen reduction reactions (ORRs). Various modification strategies such as: soaking, heat treatment and plasma modification have been reported to introduce functional groups typically as O-, N- and S-containing groups. In this review, the effects of anode functional groups on electroactive bacteria through the whole biofilm formation process are summarized. In addition, the application of those modification technologies to improve bioelectricity generation, resource recovery, bioelectrochemical analysis and the production of value-added chemicals and biofuels is also discussed. Accordingly, this review aims to help scientists select the most appropriate functional groups and up-to-date methods to improve biofilm formation.

Simultaneous debromination and mineralization of bromophenol in an up-flow electricity-stimulated anaerobic system

Due to highly recalcitrant and toxicological nature of halogenated organic compounds, conventional anaerobic dehalogenation is often limited by low removal rate and poor process stability. Besides, the reduction intermediates or products formed during dehalogenation process, which are still toxic, required further energy-intensive aerobic post-treatment. In this study, an up-flow electricity-stimulated anaerobic system (ESAS) was developed by installing cathode underneath and anode above to realize simultaneous anaerobic debromination and mineralization of 4-bromophenol (4-BP). When cathode potential was -600 mV, high TOC removal efficiency (98.78 ± 0.96%), complete removal of 4-BP and phenol could be achieved at 4-BP loading rate of 0.58 mol m^-3 d^-1, suggesting debrominated product of 4-BP from cathode (i.e., phenol) would be utilized as the fuel by the bioanode of ESAS. Under high 4-BP loading rate (2.32 mol m^-3 d^-1) and low electron donor dosage (4.88 mM), 4-BP could be completely removed at acetate usage ratio as low as 4.21 ± 1.42 mol acetate mol^-1 4-BP removal in ESAS, whereas only 13.45 ± 1.38% of 4-BP could be removed at acetate usage ratio as high as 31.28 ± 3.38 mol acetate mol^-1 4-BP removal in control reactor. Besides, electrical stimulation distinctly facilitated the growth of various autotrophic dehalogenation species, phenol degradation related species, fermentative species, homoacetogens and electrochemically active species in ESAS. Moreover, based on the identified intermediates and the bacterial taxonomic analysis, possible metabolism mechanism involved in enhanced anaerobic debromination and mineralization of 4-BP in ESAS was proposed.

Validation of effective roles of non-electroactive microbes on recalcitrant contaminant degradation in bioelectrochemical systems

Bioelectrochemical systems (BESs) have been widely investigated for recalcitrant waste treatment mainly because of their waste removal effectiveness. Electroactive microbes (EMs) have long been thought to contribute to the high effectiveness by interacting with electrodes via electron chains. However, this work demonstrated the dispensable role of EMs for enhanced recalcitrant contamination degradation in BESs. We revealed enhanced p-fluoronitrobenzene (p-FNB) degradation in a BES by observing a defluorination efficiency that was three times higher than that in biodegradation or electrochemical processes. Such an improvement was achieved by the collaborative roles of electrode biofilms and planktonic microbes, as their individual contributions to p-FNB degradation were found to be similarly stimulated by electricity. However, no bioelectrochemical activity was found in either the electrode biofilms or the planktonic microbes during stimulated p-FNB degradation; because no biocatalytically reductive or oxidative turnovers were observed on cyclic voltammetry curves. The non-involvement of EMs was further proven by the similar microbial community evolution for biofilms and planktonic microbes. In summary, we proposed a mechanism for indirect electrical stimulation of microbial metabolism by electrochemically generating the active mediator p-fluoroaniline (p-FA) and further degradation by a sequential combination of electrochemical p-FNB reduction and biological p-FA oxidation by non-EMs.

Evaluation of microbial p-chloroaniline degradation in bioelectrochemical reactors in the presence of easily-biodegrading cosubstrates: Degradation efficiency and bacterial community structure

This study aimed to illustrate p-Chloroaniline (p-CIA) biodegradation efficiencies in bioelectrochemical reactors under stimulation by a low-voltage electric field (0.2 V versus Ag/AgCl) in the presence of easily-degrading cosubstrates including glucose and acetate. The biodegradation efficiencies of closed-circuit bioreactors were compared with those of open-circuit reactors. Experimental results showed that the six different bioreactors provided different p-CIA biodegradation efficiencies. The highest biodegradation efficiency of 38.5 ± 10.3 mg/l was obtained in a closed-circuit bioreactor with acetate and the lowest biodegradation efficiency of 15.7 ± 9.4 mg/l was obtained in an open-circuit bioreactor. This difference may be attributed to the presence of electrical stimulation and acetate. The results for generated current and biodegradation efficiency indicated that acetate is a better cosubstrate than glucose. High-throughput sequencing technologies were used to characterise the bacterial community structure of the six bioreactors and revealed that different bacterial communities resulted in different treatment efficiencies.

Degradation of 2,4,6-trichlorophenol and determination of bacterial community structure by micro-electrical stimulation with or without external organic carbon source

This study aimed to investigate the degradation efficiency of 2,4,6-trichlorophenol through a batch of potentiostatic experiments (0.2 V vs. Ag/AgCl). Efficiencies in the presence and absence of acetate and glucose were compared through open-circuit reference experiments. Significant differences in degradation efficiency were observed in six reactors. The highest and lowest degradation efficiencies were observed in the closed-circuit reactor fed with glucose and in the open-circuit reactor, respectively. This finding was due to the enhanced bacterial metabolism caused by the application of micro-electrical field and degradable organics as co-substrates. The different treatment efficiencies were also caused by the distinct bacterial communities. The composition of bacterial community was affected by adding different organics as co-substrates. At the phylum level, the most dominant bacteria in the reactor with the added acetate and glucose were Proteobacteria and Firmicutes, respectively.

Bioaugmentation potential of a newly isolated strain Sphingomonas sp. NJUST37 for the treatment of wastewater containing highly toxic and recalcitrant tricyclazole

In order to develop an effective bioaugmentation strategy for the removal of highly toxic and recalcitrant tricyclazole from wastewater, a tricyclazole degrading strain was firstly successfully isolated and identified as Sphingomonas sp. NJUST37. In batch reactors, 100 mg L^-1 tricyclazole could be completely removed within 102 h, which was accompanied by significant biomass increase, TOC and COD removal, as well as toxicity reduction. Chromatography analysis and density functional theory simulation indicated that monooxygenation occurred firstly, followed by triazole ring cleavage, decyanation reaction, hydration reaction, deamination, dihydroxylation and final mineralization reaction. Tricyclazole biodegradation condition by NJUST37 was optimized in terms of temperature, pH, tricyclazole concentration and additional carbon and nitrogen sources. After the inoculation of NJUST37 into a pilot-scale powdered activated carbon treatment tank treating real fungicide wastewater, tricyclazole removal efficiency increased to higher than 90%, demonstrating the great potential of NJUST37 for bioaugmentation particularly on tricyclazole biodegradation in practice.

Cathode potential regulation in a coupled bioelectrode-anaerobic sludge system for effective dechlorination of 2,4-dichloronitrobenzene

For enhanced dechlorination of 2,4-dichloronitrobenzene (2,4-DClNB), a coupled microbial electrosynthesis-upflow anaerobic sludge reactor (MES-UASB) was established, and the effect of cathode potential on the performance of combined process was investigated in this study. Results showed that a higher dechlorination efficiency of 78.5 ± 6.1% was achieved in the coupled MES-UASB at -660 mV, and the degradation rate of 4-chloroaniline (4-ClAn) reached 4.61 mg·L^-1·d^-1 within 120 h at -660 mV of cathode potential in batch experiments. The results of Illumina sequencing indicated that the biocathode operated at a lower potential favored the enrichment of dechlorination-related microbes such as Dehalobacter, Dehalococcoides and Anaeromyxobacter both in granular sludge and cathode biofilm. It could be speculated that a lower cathode potential is more feasible for the dechlorination of 2,4-DClNB due to the enrichment of dechlorination-related microbes as well as the production of electrons with higher energy for long-distance electron transfer (LDET).

Glucose and Applied Voltage Accelerated p-Nitrophenol Reduction in Biocathode of Bioelectrochemical Systems

p-Nitrophenol (PNP) is common in the wastewater from many chemical industries. In this study, we investigated the effect of initial concentrations of PNP and glucose and applied voltage on PNP reduction in biocathode BESs and open-circuit biocathode BESs (OC-BES). The PNP degradation efficiency of a biocathode BES with 0.5 V (Bioc-0.5) reached 99.5 ± 0.8%, which was higher than the degradation efficiency of the BES with 0 V (Bioc-0) (62.4 ± 4.5%) and the OC-BES (59.2 ± 12.5%). The PNP degradation rate constant (kPNP) of Bioc-0.5 was 0.13 ± 0.01 h-1, which was higher than the kPNP of Bioc-0 (0.024 ± 0.002 h-1) and OC-BES (0.013 ± 0.0005 h-1). PNP degradation depended on the initial concentrations of glucose and PNP. A glucose concentration of 0.5 g L-1 was best for PNP degradation. The initial PNP increased from 50 to 130 mg L-1 and the kPNP decreased from 0.093 ± 0.008 to 0.027 ± 0.001 h-1. High-throughput sequencing of 16S rRNA gene amplicons indicated differences in microbial community structure between BESs with different voltages and the OC-BES. The predominant populations were affiliated with Streptococcus (42.7%) and Citrobacter (54.1%) in biocathode biofilms of BESs, and Dysgonomonas were the predominant microorganisms in biocathode biofilms of OC-BESs. The predominant populations were different among the cathode biofilms and the suspensions. These results demonstrated that applied voltage and biocathode biofilms play important roles in PNP degradation.

Substantial enhancement of anaerobic pyridine bio-mineralization by electrical stimulation

Due to highly recalcitrant and toxicological nature of pyridine, the conventional anaerobic bioprocess is often limited by low removal rate and poor process stability. In this study, an electricity-assisted anaerobic system was developed in order to enhance biodegradation of pyridine from wastewater. The results showed that the performance and stability of the anaerobic reactor was remarkably improved for pyridine biodegradation with the applied direct current of 0.3 mA, where the efficiencies of pyridine and total organic carbon removal as well as NH₄⁺-N formation were as high as 100.0%, 96.1 ± 1.2% and 60.1 ± 2.1% respectively. The compact biofilm due to electrical stimulation as well as the microaerobic environment in the bioanode might promote pyridine bio-mineralization in the anaerobic reactor. Moreover, the species related to pyridine biodegradation (Desulfovibrio, Dokdonella, Hydrogenophaga, and Paracoccus) were enriched in the anodic biofilm, which would be another reason for better reactor performance. This study demonstrated that electrical stimulation would be a potential alternative for the enhancement of pyridine removal from wastewater in anaerobic systems.

Accelerated removal of high concentration p-chloronitrobenzene using bioelectrocatalysis process and its microbial communities analysis

p-Chloronitrobenzene (p-CNB) is a persistent refractory and toxic pollutant with a concentration up to 200 mg/L in industrial wastewater. Here, a super-fast removal rate was found at 0.2-0.8 V of external voltage over a p-CNB concentration of 40-120 mg/L when a bioelectrochemical technology is used comparing to the natural biodegradation and electrochemical methods. The reduction kinetics (k) was fitted well according to pseudo-first order model with respect to the different initial concentration, indicating a 1.12-fold decrease from 1.80 to 0.85 h^-1 within the experimental range. Meanwhile, the highest k was provided at 0.5 V with the characteristic of energy saving. It was revealed that the functional bacterial (Propionimicrobium, Desulfovibrio, Halanaerobium, Desulfobacterales) was selectively enriched under electro-stimulation, which possibly processed Cl-substituted nitro-aromatics reduction. The possible degradation pathway was also proposed. This work provides the beneficial choice on the rapid treatment of high-concentration p-CNB wastewater.

A novel approach for recovery of metals from waste printed circuit boards and simultaneous removal of iron from steel pickling waste liquor by two-step hydrometallurgical method

Waste printed circuit boards (WPCBs) and steel pickling waste liquor (SPWL) have received extensive attention in recent years because of its harmfulness and resource. In this work, two-step leaching process was carried out by using SPWL as the leaching agent. A series of continuously domesticated bacteria were used for bioleaching and the bacterial strain was identified as Acidithiobacillus ferrooxidans (A. ferrooxidans) by 16S rDNA gene sequence analysis. The vast majority of the metals in WPCBs were recovered by two-step leaching, such as Cu, Pb, Zn, Sn, Al, Ni. Meanwhile, a large amount of iron was removed from SPWL, which greatly reduces the burden of the subsequent treatment. Pulp density and pH were optimized to achieve maximum recovery of copper and simultaneous removal of iron in bioleaching. It was found that the optimum conditions were pulp density 60 g/L and pH 0.5-1.0. Nearly 100% of copper was recovered and 51.94% of iron was removed under optimum conditions. The kinetic experiments showed that the rate of copper leaching was controlled by external diffusion rather than internal diffusion, because the acidic environment of the leachate prevented the formation of the precipitate and maintained it in a smaller size.

Balancing cellular redox metabolism in microbial electrosynthesis and electro fermentation - A chance for metabolic engineering

More and more microbes are discovered that are capable of extracellular electron transfer, a process in which they use external electrodes as electron donors or acceptors for metabolic reactions. This feature can be used to overcome cellular redox limitations and thus optimizing microbial production. The technologies, termed microbial electrosynthesis and electro-fermentation, have the potential to open novel bio-electro production platforms from sustainable energy and carbon sources. However, the performance of reported systems is currently limited by low electron transport rates between microbes and electrodes and our limited ability for targeted engineering of these systems due to remaining knowledge gaps about the underlying fundamental processes. Metabolic engineering offers many opportunities to optimize these processes, for instance by genetic engineering of pathways for electron transfer on the one hand and target product synthesis on the other hand. With this review, we summarize the status quo of knowledge and engineering attempts around chemical production in bio-electrochemical systems from a microbe perspective. Challenges associated with the introduction or enhancement of extracellular electron transfer capabilities into production hosts versus the engineering of target compound synthesis pathways in natural exoelectrogens are discussed. Recent advances of the research community in both directions are examined critically. Further, systems biology approaches, for instance using metabolic modelling, are examined for their potential to provide insight into fundamental processes and to identify targets for metabolic engineering.

Influence of organic load rate (OLR) on the hydrolytic acidification of 2-butenal manufacture wastewater and analysis of bacterial community structure

The influence of organic loading rate (OLR) on the performance of hydrolytic acidification process for treating 2-butenal manufacture wastewater was comprehensively studied, while its impact on microbial community was thoroughly investigated. The results demonstrated that over 21.0% of the average COD removal rate was observed in the range of OLR from 0.52 to 3.98g COD/L·d, whereas it reduced to 15.3% with increasing OLR to 6.09g COD/L·d. The acidification degree dramatically decreased from 17.1% to 4.7% when OLR increased from 3.98 to 6.09g COD/L·d. In addition, the removal rates of three kinds of typical matters were less than 65% at the OLR 6.09g COD/L·d. Illumina MiSeq sequencing revealed that Proteobacteria, Chloroflexi, Firmicutes, and Bacteroidetes were dominant phyla at different OLRs. Finally, multivariate analysis suggested that the genera Longilinea and T78 had a positive correlation with the degradation of three kinds of typical matters and COD removal rates.

The effect of Mg2+ on digestion performance and microbial community structures in sludge digestion systems

The important criteria in anaerobic digestion is the rate-limiting step which decides the fate of value-added products especially from waste-activated sludge (WAS). Hence, the present study investigated the effect of magnesium (Mg²⁺) addition on anaerobic digestion of WAS. The lab-scale experiments were conducted at 25 °C with Mg²⁺ doses ranging from 0.01 to 0.2 mol/L. Maximum total volatile fatty acids (VFAs) production (372.78 mg COD/L) occurred at a Mg²⁺ dose of 0.2 mol/L, which was about eight times higher than the control tests. Further, Mg²⁺ addition facilitated sludge dewaterability and phosphorus removal. The mechanism of improved VFAs generation was analyzed from the view of both chemical and biological effects. Chemical effect significantly enhanced the release of calcium and iron in WAS, resulting in the disintegration of WAS, which benefited hydrolysis and acidification processes. Illumina MiSeq sequencing analysis revealed that enrichment of functional bacteria and the increase of bacterial diversity were obtained in the 0.2 mol Mg²⁺/L experiment, while the influence was negative on the reactor with 0.025 mol/L Mg²⁺. Meanwhile, methanogens were accordantly inhibited in the experiments with Mg²⁺ addition.

Polarity inversion of bioanode for biocathodic reduction of aromatic pollutants

The enrichment of specific pollutant-reducing consortium is usually required prior to the startup of biocathode bioelectrochemical system (BES) and the whole process is time consuming. To rapidly establish a non-specific functional biocathode, direct polar inversion from bioanode to biocathode is proposed in this study. Based on the diverse reductases and electron transfer related proteins of anode-respiring bacteria (ARB), the acclimated electrochemically active biofilm (EAB) may catalyze reduction of different aromatic pollutants. Within approximately 12 d, the acclimated bioanodes were directly employed as biocathodes for nitroaromatic nitrobenzene (NB) and azo dye acid orange 7 (AO7) reduction. Our results indicated that the established biocathode significantly accelerated the reduction of NB to aniline (AN) and AO7 to discolored products compared with the abiotic cathode and open circuit controls. Several microbes possessing capabilities of nitroaromatic/azo dye reduction and bidirectional electron transfer were maintained or enriched in the biocathode communities. Cyclic voltammetry highlighted the decreased over-potentials and enhanced electron transfer of biocathode as well as demonstrated the ARB Geobacter containing cytochrome c involved in the backward electron transfer from electrode to NB. This study offers new insights into the rapid establishment and modularization of functional biocathodes for the potential treatment of complicated electron acceptors-coexisting wastewaters.

The key role of biogenic manganese oxides in enhanced removal of highly recalcitrant 1,2,4-triazole from bio-treated chemical industrial wastewater

The secondary effluent from biological treatment process in chemical industrial plant often contains refractory organic matter, which deserves to be further treated in order to meet the increasingly stringent environmental regulations. In this study, the key role of biogenic manganese oxides (BioMnOx) in enhanced removal of highly recalcitrant 1,2,4-triazole from bio-treated chemical industrial wastewater was investigated. BioMnOx production by acclimated manganese-oxidizing bacterium (MOB) consortium was confirmed through scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) analysis. Pseudomonas and Bacillus were found to be the most predominant species in acclimated MOB consortium. Mn²⁺ could be oxidized optimally at neutral pH and initial Mn²⁺ concentration below 33 mg L^-1. However, 1,2,4-triazole removal by BioMnOx produced occurred optimally at slightly acidic pH. High dosage of both Mn²⁺ and 1,2,4-triazole resulted in decreased 1,2,4-triazole removal. In a biological aerated filter (BAF) coupled with manganese oxidation, 1,2,4-triazole and total organic carbon removal could be significantly enhanced compared to the control system without the participation of manganese oxidation, confirming the key role of BioMnOx in the removal of highly recalcitrant 1,2,4-triazole. This study demonstrated that the biosystem coupled with manganese oxidation had a potential for the removal of various recalcitrant contaminants from bio-treated chemical industrial wastewater.

Microbial community structure of different electrode materials in constructed wetland incorporating microbial fuel cell

The microbial fuel cell coupled with constructed wetland (CW-MFC) microcosms were operated under fed-batch mode for evaluating the effect of electrode materials on bioelectricity generation and microbial community composition. Experimental results indicated that the bioenergy output in CW-MFC increased with the substrate concentration; maximum average voltage (177mV) was observed in CW-MFC with carbon fiber felt (CFF). In addition, the four different materials resulted in the formation of significantly different microbial community distribution around the anode electrode. The relative abundance of Proteobacteria in CFF and foamed nickel (FN) was significantly higher than that in stainless steel mesh (SSM) and graphite rod (GR) samples. Notably, the findings indicate that CW-MFC utilizing FN anode electrode could apparently improve relative abundance of Dechloromonas, which has been regarded as a denitrifying and phosphate accumulating microorganism.

p-Nitrophenol degradation and microbial community structure in a biocathode bioelectrochemical system

The biocathode bioelectrochemical system (bioc-BES) was used forp-nitrophenol (PNP) degradation with sodium bicarbonate as the carbon source.