1
|
Osman MEH, Abo-Shady AM, Gheda SF, Desoki SM, Elshobary ME. Unlocking the potential of microalgae cultivated on wastewater combined with salinity stress to improve biodiesel production. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2023; 30:114610-114624. [PMID: 37863854 PMCID: PMC10663198 DOI: 10.1007/s11356-023-30370-6] [Citation(s) in RCA: 9] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/03/2023] [Accepted: 10/06/2023] [Indexed: 10/22/2023]
Abstract
Microalgae have the potential as a source of biofuels due to their high biomass productivity and ability to grow in a wide range of conditions, including wastewater. This study investigated cultivating two microalgae species, Oocystis pusilla and Chlorococcus infusionum, in wastewater for biodiesel production. Compared to Kühl medium, KC medium resulted in a significant fold increase in cellular dry weight production for both O. pusilla and C. infusionum, with an increase of 1.66 and 1.39, respectively. A concentration of 100% wastewater resulted in the highest growth for O. pusilla, with an increase in biomass and lipid content compared to the KC medium. C. infusionum could not survive in these conditions. For further increase in biomass and lipid yield of O. pusilla, different total dissolved solids (TDS) levels were used. Maximum biomass and lipid productivities were achieved at 3000 ppm TDS, resulting in a 28% increase in biomass (2.50 g/L) and a 158% increase in lipid yield (536.88 mg/g) compared to KC medium. The fatty acid profile of O. pusilla cultivated on aerated wastewater at 3000 ppm TDS showed a high proportion of desirable saturated fatty acids (SFA) and monounsaturated fatty acids (MUFA) for biodiesel production. Cultivating microalgae in wastewater for biodiesel production can be cost-effective, especially for microalgae adapted to harsh conditions. It could be concluded that O. pusilla is a promising candidate for biodiesel production using wastewater as a growth medium, as it has high biomass productivity and lipid yield, and its fatty acid profile meets the standard values of American and European biodiesel standards. This approach offers a sustainable and environmentally friendly solution for producing biofuels while reducing the environmental impact of wastewater disposal.
Collapse
Affiliation(s)
- Mohamed E H Osman
- Botany Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Atef M Abo-Shady
- Botany Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Saly F Gheda
- Botany Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Samy M Desoki
- Botany Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Mostafa E Elshobary
- Botany Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt.
| |
Collapse
|
2
|
Pandey AK, Park J, Ko J, Joo HH, Raj T, Singh LK, Singh N, Kim SH. Machine learning in fermentative biohydrogen production: Advantages, challenges, and applications. BIORESOURCE TECHNOLOGY 2023; 370:128502. [PMID: 36535617 DOI: 10.1016/j.biortech.2022.128502] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/31/2022] [Revised: 12/11/2022] [Accepted: 12/14/2022] [Indexed: 06/17/2023]
Abstract
Hydrogen can be produced in an environmentally friendly manner through biological processes using a variety of organic waste and biomass as feedstock. However, the complexity of biological processes limits their predictability and reliability, which hinders the scale-up and dissemination. This article reviews contemporary research and perspectives on the application of machine learning in biohydrogen production technology. Several machine learning algorithems have recently been implemented for modeling the nonlinear and complex relationships among operational and performance parameters in biohydrogen production as well as predicting the process performance and microbial population dynamics. Reinforced machine learning methods exhibited precise state prediction and retrieved the underlying kinetics effectively. Machine-learning based prediction was also improved by using microbial sequencing data as input parameters. Further research on machine learning could be instrumental in designing a process control tool to maintain reliable hydrogen production performance and identify connection between the process performance and the microbial population.
Collapse
Affiliation(s)
- Ashutosh Kumar Pandey
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Jungsu Park
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Jeun Ko
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Hwan-Hong Joo
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Tirath Raj
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea
| | - Lalit Kumar Singh
- Department of Biochemical Engineering, Harcourt Butler Technical University, Kanpur 208002, Uttar Pradesh (UP), India
| | - Noopur Singh
- Dr. A. P. J. Abdul Kalam Technical University, Lucknow, Uttar Pradesh (UP), India
| | - Sang-Hyoun Kim
- Department of Civil and Environmental Engineering, Yonsei University, Seoul 03722, Republic of Korea.
| |
Collapse
|
3
|
Elshobary ME, Zabed HM, Qi X, El-Shenody RA. Enhancing biomass and lipid productivity of a green microalga Parachlorella kessleri for biodiesel production using rapid mutation of atmospheric and room temperature plasma. BIOTECHNOLOGY FOR BIOFUELS AND BIOPRODUCTS 2022; 15:122. [PMID: 36372889 PMCID: PMC9655907 DOI: 10.1186/s13068-022-02220-z] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/12/2022] [Accepted: 10/23/2022] [Indexed: 06/16/2023]
Abstract
BACKGROUND Microalgae, with their high adaptability to various stress conditions and rapid growth, are considered excellent biomass resources for lipid production and biodiesel feedstocks. However, lipid yield and productivity of the natural strains are common bottlenecks in their large-scale use for lipid production, which can be overcome by evolving new strains using conventional and advanced mutagenic techniques. It is challenging to generate microalgae strains capable of high lipid synthesis through natural selection. As a result, random mutagenesis is currently considered a viable option in many scenarios. The objective of this study was to explore atmospheric and room temperature plasma (ARTP) as a random mutagenesis technique to obtain high lipid-accumulating mutants of a green microalga for improved biodiesel production. RESULTS A green microalgal species was isolated from the Chinese Yellow Sea and identified as Parachlorella kessleri (OM758328). The isolated microalga was subsequently mutated by ARTP to obtain high lipid-accumulating mutants. Based on the growth rate and lipid content, 5 mutants (named M1, M2, M4, M5, and M8) were selected from 15 pre-selected mutants. These five mutants varied in their growth rate from 0.33 to 0.68 day-1, with the lipid content varying between 0.25 g/L in M2 to 0.30 g/L in M8 at 10th day of cultivation. Among the mutants, M8 showed the maximum biomass productivity (0.046 g/L/day) and lipid productivity (20.19 mg/L/day), which were 75% and 44% higher than the wild strain, respectively. The triglyceride (TAG) content of M8 was found to be 0.56 g/L at 16th day of cultivation, which was 1.77-fold higher than that of the wild strain. Furthermore, M8 had the highest saturated fatty acids (C16-18) with the lowermost polyunsaturated fatty acid content, which are favorable properties of a biodiesel feedstock according to international standards. CONCLUSION The mutant strain of P. kessleri developed by the ARTP technique exhibited significant improvements in biomass productivity, lipid content, and biodiesel quality. Therefore, the biomass of this mutant microalga could be a potential feedstock for biodiesel production.
Collapse
Affiliation(s)
- Mostafa E Elshobary
- Department of Botany, Faculty of Science, Tanta University, Tanta, 31527, Egypt.
| | - Hossain M Zabed
- School of Food and Biological Engineering, Jiangsu University, Zhenjiang, 212013, Jiangsu, China
| | - Xianghui Qi
- School of Food and Biological Engineering, Jiangsu University, Zhenjiang, 212013, Jiangsu, China
| | - Rania A El-Shenody
- Department of Botany, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| |
Collapse
|
4
|
Kumar Sharma A, Kumar Ghodke P, Goyal N, Nethaji S, Chen WH. Machine learning technology in biohydrogen production from agriculture waste: Recent advances and future perspectives. BIORESOURCE TECHNOLOGY 2022; 364:128076. [PMID: 36216286 DOI: 10.1016/j.biortech.2022.128076] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/31/2022] [Revised: 09/30/2022] [Accepted: 10/02/2022] [Indexed: 06/16/2023]
Abstract
Agricultural waste biomass has shown great potential to deliver green energy produced by biochemical and thermochemical conversion processes to mitigate future energy crises. Biohydrogen has become more interested in carbon-free and high-energy dense fuels among different biofuels. However, it is challenging to develop models based on experience or theory for precise predictions due to the complexity of biohydrogen production systems and the limitations of human perception. Recent advancements in machine learning (ML) may open up new possibilities. For this reason, this critical study offers a thorough understanding of ML's use in biohydrogen production. The most recent developments in ML-assisted biohydrogen technologies, including biochemical and thermochemical processes, are examined in depth. This review paper also discusses the prediction of biohydrogen production from agricultural waste. Finally, the techno-economic and scientific obstacles to ML application in agriculture waste biomass-based biohydrogen production are summarized.
Collapse
Affiliation(s)
- Amit Kumar Sharma
- Department of Chemistry, Applied Sciences Cluster, Centre for Alternate and Renewable Energy Research, R&D, University of Petroleum & Energy Studies (UPES), School of Engineering, Energy Acres Building, Bidholi, Dehradun 248007, Uttarakhand, India
| | - Praveen Kumar Ghodke
- Department of Chemical Engineering, National Institute of Technology Calicut, Kozhikode 673601, Kerala, India
| | - Nishu Goyal
- School of Health Sciences, University of Petroleum & Energy Studies (UPES), School of Engineering, Energy Acres Building, Bidholi, Dehradun 248007, Uttarakhand, India
| | - S Nethaji
- Department of Chemical Engineering, Manipal Institute of Technology, Manipal Karnataka, 576104 l, India
| | - Wei-Hsin Chen
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung 411, Taiwan.
| |
Collapse
|
5
|
Bhatt P, Bhandari G, Bhatt K, Simsek H. Microalgae-based removal of pollutants from wastewaters: Occurrence, toxicity and circular economy. CHEMOSPHERE 2022; 306:135576. [PMID: 35803375 DOI: 10.1016/j.chemosphere.2022.135576] [Citation(s) in RCA: 40] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/21/2022] [Revised: 06/06/2022] [Accepted: 06/29/2022] [Indexed: 06/15/2023]
Abstract
The natural and anthropogenic sources of water bodies are contaminated with diverse categories of pollutants such as antibiotics, pharmaceuticals, pesticides, heavy metals, organic compounds, and other industrial chemicals. Depending on the type and the origin of the pollutants, the degree of contamination can be categorized into lower to higher concentrations. Therefore, the removal of hazardous chemicals from the environment is an important aspect. The physical, chemical and biological approaches have been developed and implemented to treat wastewaters. The microbial and algal treatment methods have emerged as a growing field due to their eco-friendly and sustainable approach. Particularly, microalgae emerged as a potential organism for the treatment of contaminated water bodies. The microalgae of the genera Chlorella, Anabaena, Ankistrodesmus, Aphanizomenon, Arthrospira, Botryococcus, Chlamydomonas, Chlorogloeopsis, Dunaliella, Haematococcus, Isochrysis, Nannochloropsis, Porphyridium, Synechococcus, Scenedesmus, and Spirulina reported for the wastewater treatment and biomass production. Microalgae have the potential for adsorption, bioaccumulation, and biodegradation. The microalgal strains can mitigate the hazardous chemicals via their diverse cellular mechanisms. Applications of the microalgae strains were found to be effective for sustainable developments and circular economy due to the production of biomass with the utilization of pollutants.
Collapse
Affiliation(s)
- Pankaj Bhatt
- Department of Agricultural & Biological Engineering, Purdue University, West Lafayette, IN, 47906, USA.
| | - Geeta Bhandari
- Department of Biosciences, Swami Rama Himalayan University, Dehradun, 248016, India
| | - Kalpana Bhatt
- Department of Food Science, Purdue University, West Lafayette, IN, USA
| | - Halis Simsek
- Department of Agricultural & Biological Engineering, Purdue University, West Lafayette, IN, 47906, USA.
| |
Collapse
|
6
|
Bhatt P, Bhandari G, Turco RF, Aminikhoei Z, Bhatt K, Simsek H. Algae in wastewater treatment, mechanism, and application of biomass for production of value-added product. ENVIRONMENTAL POLLUTION (BARKING, ESSEX : 1987) 2022; 309:119688. [PMID: 35793713 DOI: 10.1016/j.envpol.2022.119688] [Citation(s) in RCA: 27] [Impact Index Per Article: 13.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/28/2022] [Revised: 05/21/2022] [Accepted: 06/24/2022] [Indexed: 05/16/2023]
Abstract
The pollutants can enter water bodies at various point and non-point sources, and wastewater discharge remains a major pathway. Wastewater treatment effectively reduces contaminants, it is expensive and requires an eco-friendly and sustainable alternative approach to reduce treatment costs. Algae have recently emerged as a potentially cost-effective method to remediate toxic pollutants through the mechanism of biosorption, bioaccumulation, and intracellular degradation. Hence, before discharging the wastewater into the natural environment better solutions for environmental resource recovery and sustainable developments can be applied. More importantly, algae are a potential feedstock material for various industrial applications such as biofuel production. Currently, researchers are developing algae as a source for pharmaceuticals, biofuels, food additives, and bio-fertilizers. This review mainly focused on the potential of algae and their specific mechanisms involved in wastewater treatment and energy recovery systems leading to important industrial precursors. The review is highly beneficial for scientists, wastewater treatment plant operators, freshwater managers, and industrial communities to support the sustainable development of natural resources.
Collapse
Affiliation(s)
- Pankaj Bhatt
- Department of Agricultural & Biological Engineering, Purdue University, West Lafayette, IN, 47906, USA.
| | - Geeta Bhandari
- Department of Biosciences, Swami Rama Himalayan University, Dehradun, 248016, Uttarakhand, India
| | - Ronald F Turco
- Department of Agronomy, Purdue University, West Lafayette, IN, 47906, USA
| | - Zahra Aminikhoei
- Agricultural Research Education and Extension Organization (AREEO), Iranian Fisheries Science Research Institute (IFSRI), Offshore Fisheries Research Center, Chabahar, Iran
| | - Kalpana Bhatt
- Department of Food Science, Purdue University, West Lafayette, IN, USA
| | - Halis Simsek
- Department of Agricultural & Biological Engineering, Purdue University, West Lafayette, IN, 47906, USA.
| |
Collapse
|
7
|
Recent Advances in Catalytic Pyrolysis of Municipal Plastic Waste for the Production of Hydrocarbon Fuels. Processes (Basel) 2022. [DOI: 10.3390/pr10081497] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Currently, the resources of fossil fuels, such as crude oil, natural gas, and coal, are depleting day by day due to increasing energy demands. Nowadays, plastic items have witnessed a substantial surge in manufacturing due to their wide range of applications and low cost. Therefore, the amount of plastic waste is increasing rapidly. Hence, the proper management of plastic wastes for sustainable technologies is the need of the hour. Chemical recycling technologies based on pyrolysis are emerging as the best waste management approaches due to their robustness and better economics. However, research on converting plastic waste into fuels and other value-added goods has yet to be undertaken, and more R&D is required to make waste-plastic-based fuels economically viable. In this review article, the current status of the plastic waste pyrolysis process is discussed in detail. Process-controlling parameters such as temperature, pressure, residence time, reactor type, and catalyst dose are also investigated in this review paper. In addition, the application of reaction products is also described in brief. For example, plasto-oil obtained by catalytic pyrolysis may be utilized in various sectors, e.g., transportation, industrial boilers, and power generation. On the other hand, byproducts, such as solid residue (plasto-char), could be used as a road construction material or to make activated carbon or graphenes, while the non-condensable gases have a good potential to be utilized as heating/energy source.
Collapse
|
8
|
Abstract
Microalgae have a high capacity to capture CO2. Additionally, biomass contains lipids that can be used to produce biofuels, biolubricants, and other compounds of commercial interest. This study analyzed various scenarios for microalgae lipid production by simulation. These scenarios include cultivation in raceway ponds, primary harvest with three flocculants, secondary harvest with pressure filter (and drying if necessary), and three different technologies for the cell disruption step, which facilitates lipid extraction. The impact on energy consumption and production cost was analyzed. Both energy consumption and operating cost are higher in the scenarios that consider bead milling (8.79–8.88 kWh/kg and USD 41.06–41.41/kg), followed by those that consider high-pressure homogenization (HPH, 5.39–5.46 kWh/kg and USD 34.26–34.71/kg). For the scenarios that consider pressing, the energy consumption is 5.80–5.88 kWh/kg and the operating cost is USD 27.27–27.88/kg. The consumption of CO2 in scenarios that consider pressing have a greater capture (11.23 kg of CO2/kg of lipids). Meanwhile, scenarios that consider HPH are the lowest consumers of fresh water (5.3 m3 of water/kg of lipids). This study allowed us to develop a base of multiple comparative scenarios, evaluate different aspects involved in Chlorella vulgaris lipid production, and determine the impact of various technologies in the cell disruption stage.
Collapse
|
9
|
Desjardins SM, Laamanen CA, Basiliko N, Senhorinho GNA, Scott JA. Dark stress for improved lipid quantity and quality in bioprospected acid-tolerant green microalgae. FEMS Microbiol Lett 2022; 369:6615457. [PMID: 35746875 DOI: 10.1093/femsle/fnac057] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2021] [Revised: 05/26/2022] [Accepted: 06/18/2022] [Indexed: 11/14/2022] Open
Abstract
The cost of microalgae cultivation is one of the largest limitations to achieving sustainable, large-scale microalgae production of commercially desirable lipids. Utilizing CO2 as a 'free' carbon source from waste industrial flue gas emissions can offer wide-ranging cost savings. However, these gas streams typically create acidic environments, in which most microalgae cannot survive due to the concentration of CO2 and the presence of other acidic gasses such as NO2 and SO2. To address this situation, we investigated growth of a mixed acid-tolerant green microalgal culture (91% dominated by a single Coccomyxa sp. taxon) bioprospected at pH 2.8 from an acid mine drainage impacted water body. The culture was grown at pH 2.5 and fed with a simulated flue gas containing 6% CO2 and 94% N2. On reaching the end of the exponential growth phase, the culture was exposed to either continued light-dark cycle conditions or continual dark conditions. After three days in the dark, the biomass consisted of 28% of lipids, which was 42% higher than at the end of the exponential phase and 55% higher than the maximum lipid content achieved under light/dark conditions. The stress caused by being continually in the dark also favoured the production of omega-3 and omega-6 polyunsaturated fatty acids (PUFAs; 19.47% and 21.04%, respectively, after 7 days) compared to 7-days of light-dark treatment (1.94% and 9.53%, respectively) and showed an increase in nitrogen content (C:N ratio of 6.4) compared to light-dark treatment (C:N ratio of 11.9). The results of the research indicate that use of acid tolerant microalgae overcomes issues using flue gasses that will create an acidic environment and that applying dark stress is a low-cost stressor stimulates production of desirable dietary lipids.
Collapse
Affiliation(s)
- Sabrina M Desjardins
- School of Engineering, Laurentian University, 935 Ramsey Lake Rd, Sudbury, ON P3E 2C6, Canada
| | - Corey A Laamanen
- School of Engineering, Laurentian University, 935 Ramsey Lake Rd, Sudbury, ON P3E 2C6, Canada
| | - Nathan Basiliko
- Department of Biology, Laurentian University, 935 Ramsey Lake Rd, Sudbury, ON P3E 2C6, Canada
| | - Gerusa N A Senhorinho
- School of Engineering, Laurentian University, 935 Ramsey Lake Rd, Sudbury, ON P3E 2C6, Canada
| | - John A Scott
- School of Engineering, Laurentian University, 935 Ramsey Lake Rd, Sudbury, ON P3E 2C6, Canada
| |
Collapse
|
10
|
Assessment of Sustainable Biogas Production from Co-Digestion of Jatropha De-Oiled Cake and Cattle Dung Using Floating Drum Type Digester under Psychrophilic and Mesophilic Conditions. CLEAN TECHNOLOGIES 2022. [DOI: 10.3390/cleantechnol4020032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/04/2022]
Abstract
Biodiesel is an emerging alternative fuel that is generally made from edible and non-edible oilseed crops. Jatropha curcus has a high potential for producing biodiesel, which yields 25–35% oil along with 75–65% solid byproduct, generally called a de-oiled cake. The present manuscript deals with the co-digestion of Jatropha de-oiled cake along with cattle dung (1:1 ratio) for biogas production in a floating-type biogas digester. The experimental study was carried out in a modified KVIC biogas plant of 6 cubic meter capacity for 60 days’ retention time under psychrophilic and mesophilic temperature conditions. During all the experiments, the total solid content of the slurry was maintained fixed at 10–12% by mixing 10 kg Jatropha de-oiled cake and 10 kg cattle dung with 80 kg water. The experimental results showed that the average specific biogas production of Jatropha de-oiled cake and cattle dung slurry was observed to be 0.216 m3/kg TS, 0.252 m3/kg VS and 0.287 m3/kg TS, 0.335 m3/kg VS, respectively, under the aforementioned conditions. Moreover, the biogas methane concentration was observed to be 62.33% to 69.16% under mesophilic temperature conditions compared to the psychrophilic temperature conditions, 65.21% to 69.15%, respectively. Furthermore, the average total volatile solids mass removal efficiency of feeding material in the abovementioned process was 7% higher under mesophilic temperature conditions than psychrophilic temperature conditions. Additionally, the results indicated that a total 588.8 kg of input volatile solids produced a total of 7306.56 MJ/m3 and 5177.88 MJ/m3 energy in 60 days under psychrophilic and mesophilic temperature conditions. On the basis of the results, it is concluded that Jatropha de-oiled cake may be a superior solution for improving biogas quality and composition as well as a value-added product, i.e., organic manure.
Collapse
|
11
|
Umar Y, Aboelazayem O, Gadalla MA, Saha B. Enhanced biodiesel production with improved oxidation stability by water addition to supercritical methanolysis. CAN J CHEM ENG 2022. [DOI: 10.1002/cjce.24475] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Yusuf Umar
- School of Engineering, London South Bank University, 103 Borough Road London United Kingdom
| | - Omar Aboelazayem
- School of Chemical and Process Engineering University of Leeds Leeds United Kingdom
| | - Mamdouh A. Gadalla
- Department of Chemical Engineering Port Said University, Port Fouad City Port Said Egypt
- Department of Chemical Engineering The British University in Egypt, El Sherouk City Cairo Egypt
| | - Basudeb Saha
- Engineering Department Lancaster University Lancaster United Kingdom
| |
Collapse
|
12
|
Biomass Gasification in Downdraft Gasifiers: A Technical Review on Production, Up-Gradation and Application of Synthesis Gas. ENERGIES 2022. [DOI: 10.3390/en15113938] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Rapid climate change and forecasted damage from fossil fuel combustion, forced researchers to investigate renewable and clean energy sources for the sustainable development of societies throughout the world. Biomass-based energy is one of the most important renewable energy sources for meeting daily energy needs, which are gaining in popularity daily. Gasification-based bioenergy production is an effective way to replace fossil fuels and reduce CO2 emissions. Even though biomass gasification has been studied extensively, there is still much opportunity for improvement in terms of high-quality syngas generation (high H2/CO ratio) and reduced tar formation. Furthermore, the presence of tar has a considerable impact on syngas quality. Downdraft gasifiers have recently shown a significant potential for producing high-quality syngas with lower tar concentrations. This article presents a comprehensive review on the advancement in biomass downdraft gasification technologies for high-quality synthesis gas. In addition, factors affecting syngas production and composition e.g., equivalency ratio, temperature, particle size, and gasification medium on synthesis gas generation are also comprehensively studied. The up-gradation and various applications of synthesis gas are also discussed in brief in this review article.
Collapse
|
13
|
Sharma P, Gujjala LKS, Varjani S, Kumar S. Emerging microalgae-based technologies in biorefinery and risk assessment issues: Bioeconomy for sustainable development. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022; 813:152417. [PMID: 34923013 DOI: 10.1016/j.scitotenv.2021.152417] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/05/2021] [Revised: 12/08/2021] [Accepted: 12/10/2021] [Indexed: 06/14/2023]
Abstract
Industrial wastewater treatment is of paramount importance considering the safety of the aquatic ecosystem and its associated health risk to humankind inhabiting near the water bodies. Microalgae-based technologies for remediation of environmental pollutants present avenues for bioenergy applications and production of value-added biochemicals having pharmaceutical, nutraceutical, antioxidants, carbohydrate, phenolics, long-chain multi-faceted fatty acids, enzymes, and proteins which are considered healthy supplements for human health. Such a wide range of products put up a good case for the biorefinery concept. Microalgae play a pivotal role in degrading complex pollutants, such as organic and inorganic contaminants thereby efficiently removing them from the environment. In addition, microalgal species, such as Botryococcus braunii, Tetraselmis suecica, Phaeodactylum tricornutum, Neochloris oleoabundans, Chlorella vulgaris, Arthrospira, Chlorella, and Tetraselmis sp., etc., are also reported for generation of value-added products. This review presents a holistic view of microalgae based biorefinery starting from cultivation and harvesting of microalgae, the potential for remediation of environmental pollutants, bioenergy application, and production of value-added biomolecules. Further, it summarizes the current understanding of microalgae-based technologies and discusses the risks involved, potential for bioeconomy, and outlines future research directions.
Collapse
Affiliation(s)
- Pooja Sharma
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nagpur 440 020, India
| | | | - Sunita Varjani
- Gujarat Pollution Control Board, Gandhinagar 382 010, Gujarat, India
| | - Sunil Kumar
- CSIR-National Environmental Engineering Research Institute (CSIR-NEERI), Nagpur 440 020, India.
| |
Collapse
|
14
|
Microwave-Assisted Extraction of Fatty Acids from Cultured and Commercial Phytoplankton Species. APPLIED SCIENCES-BASEL 2022. [DOI: 10.3390/app12052407] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
(1) Background: The extraction of fatty acids from microalgae and cyanobacteria is mostly performed with organic solvents and laborious procedures. Microwave-assisted extraction (MAE) can be a more effective and environmentally friendly process than traditional extraction (TE), which uses a large volume of solvent and conduction heating. Freshwater phytoplankton inhabits diverse aquatic environments and is a promising source of fatty acids and green precursors in the synthesis of biofuel, including cyanobacterial biomass. Therefore, the aim of this study was to investigate the potential of MAE to extract fatty acids from a Chlorella sp. microalga and two cyanobacteria, namely, Arthrospira sp. and Sphaerospermopsis torques-reginae, for biodiesel production. For this purpose, the lipid content and fatty acid profile of these strains were compared after treating biomass with the two extraction methods. (2) Methods: MAE and TE were used as extraction procedures; gas chromatography–mass spectrometry was used to assess the fatty acid profiles, and X-ray spectroscopy was used to analyze biomass. (3) Results: Although the fatty acid profile of the oil obtained by TE showed higher concentrations of fatty acids, the MAE method was able to extract more types of fatty acids. The variety of fatty acids extracted by the MAE, especially those with unsaturated chains, allowed for better quality biodiesel, presenting advantages over previous methods and studies. According to the analyses, essential fatty acids 16:0, 16:1, and 18:2 were found to be abundant in both cyanobacterial strains and in microalga, showing potential for biofuel production. Additionally, metal composition was determined as its content may indicate potential pro-oxidant influence in biofuel production. (4) Conclusions: MAE is a useful and green strategy to extract fatty acids from freshwater phytoplankton. Cyanobacteria can also be a beneficial source of fatty acids for biodiesel synthesis.
Collapse
|
15
|
Do CVT, Nguyen NTT, Pham MHT, Pham TYT, Ngo VG, Giang Le T, Tran TD. Central composite design for simultaneously optimizing biomass and lutein production by a mixotrophic Chlorella sorokiniana TH01. Biochem Eng J 2022. [DOI: 10.1016/j.bej.2021.108231] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
16
|
Kumar Sharma A, Kumar Ghodke P, Manna S, Chen WH. Emerging technologies for sustainable production of biohydrogen production from microalgae: A state-of-the-art review of upstream and downstream processes. BIORESOURCE TECHNOLOGY 2021; 342:126057. [PMID: 34597808 DOI: 10.1016/j.biortech.2021.126057] [Citation(s) in RCA: 11] [Impact Index Per Article: 3.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/14/2021] [Revised: 09/23/2021] [Accepted: 09/27/2021] [Indexed: 06/13/2023]
Abstract
Biohydrogen (BioH2) is considered as one of the most environmentally friendly fuels and a strong candidate to meet the future demand for a sustainable source of energy. Presently, the production of BioH2 from photosynthetic organisms has raised a lot of hopes in the fuel industry. Moreover, microalgal-based BioH2 synthesis not only helps to combat current global warming by capturing greenhouse gases but also plays a key role in wastewater treatment. Hence, this manuscript provides a state-of-the-art review of the upstream and downstream BioH2 production processes. Different metabolic routes such as direct and indirect photolysis, dark fermentation, photofermentation, and microbial electrolysis are covered in detail. Upstream processes (e.g. growth techniques, growth media) also have a great impact on BioH2 productivity and economics, which is also explored. Technical and scientific obstacles of microalgae BioH2 systems are finally addressed, allowing the technology to become more innovative and commercial.
Collapse
Affiliation(s)
- Amit Kumar Sharma
- Department of Chemistry, Centre for Alternate and Renewable Energy Research, R&D, University of Petroleum & Energy Studies (UPES), School of Engineering, Energy Acres Building, Bidholi, Dehradun 248007, Uttarakhand, India
| | - Praveen Kumar Ghodke
- Department of Chemical Engineering, National Institute of Technology Calicut, Kozhikode 673601, Kerala, India
| | - Suvendu Manna
- Department of Health Safety, Environment and Civil Engineering, University of Petroleum and Energy Studies, Dehradun, Uttarakhand 248007, India
| | - Wei-Hsin Chen
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung 407, Taiwan; Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung 411, Taiwan.
| |
Collapse
|
17
|
Ghodke PK, Sharma AK, Pandey JK, Chen WH, Patel A, Ashokkumar V. Pyrolysis of sewage sludge for sustainable biofuels and value-added biochar production. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2021; 298:113450. [PMID: 34388542 DOI: 10.1016/j.jenvman.2021.113450] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/31/2021] [Revised: 07/28/2021] [Accepted: 07/29/2021] [Indexed: 06/13/2023]
Abstract
The study deals with the pyrolysis of sewage sludge to produce eco-friendly and sustainable fuels along with value-added biochar products. The experiments were conducted in a fixed-bed cylindrical glass reactor in the temperature range of 250-700 °C and achieved the product yield of 22.4 wt% bio-oil, 18.9 wt % pyrolysis gases, and 58.7 wt% biochar at 500 °C optimum temperature. The chemical composition of bio-oil was investigated by gas chromatograph-mass spectroscopy and fourier transformation infrared techniques. The ASTM standard procedures were used to assess the fuel qualities of bio-oil, and they were found to be satisfactory. Bio-oil has a greater H/C ratio (3.49) and a lower O/C ratio (1.10), indicating that it is suitable for engine use. The gas chromatographic analysis of pyrolysis gases confirmed the presence of 41.16 wt % combustible gases, making it suitable for use in spark-ignition engines. X-ray fluorescence analysis of biochar showed that it had a good amount of carbon, nitrogen, phosphorus, and potassium along with some micro-and macro-nutrient which proves its potential to utilize as organic manure in the agriculture sector. In addition, the data obtained from the TGA analysis during the pyrolysis of sewage sludge was applied to calculate kinetic parameters via the Coats-Redfern method.
Collapse
Affiliation(s)
- Praveen Kumar Ghodke
- Department of Chemical Engineering, National Institute of Technology Calicut, Kozhikode, 673601, Kerala, India
| | - Amit Kumar Sharma
- Department of Chemistry, Centre for Alternate and Renewable Energy Research, R&D, University of Petroleum & Energy Studies (UPES), School of Engineering, Energy Acres Building, Bidholi, Dehradun, 248007, Uttarakhand, India.
| | - J K Pandey
- Department of Chemistry, School of Basic and Applied Sciences, Adamas University, Kolkata, 700 126, India
| | - Wei-Hsin Chen
- Department of Aeronautics and Astronautics, National Cheng Kung University, Tainan, 701, Taiwan; Research Center for Smart Sustainable Circular Economy, Tunghai University, Taichung, 407, Taiwan; Department of Mechanical Engineering, National Chin-Yi University of Technology, Taichung, 411, Taiwan
| | - Alok Patel
- Biochemical Process Engineering, Division of Chemical Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, SE-971 87, Luleå, Sweden
| | - Veeramuthu Ashokkumar
- Department of Chemical Technology, Faculty of Science, Chulalongkorn University, Bangkok, 10330, Thailand; Department of Energy and Environmental Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, 600077, India
| |
Collapse
|
18
|
Dry route process and wet route process for algal biodiesel production: A review of techno-economical aspects. Chem Eng Res Des 2021. [DOI: 10.1016/j.cherd.2021.08.018] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
19
|
Prasanth SM, Kumar PS, Harish S, Rishikesh M, Nanda S, Vo DVN. Application of biomass derived products in mid-size automotive industries: A review. CHEMOSPHERE 2021; 280:130723. [PMID: 34162084 DOI: 10.1016/j.chemosphere.2021.130723] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/17/2021] [Revised: 04/19/2021] [Accepted: 04/27/2021] [Indexed: 06/13/2023]
Abstract
The automotive industry is directly affected by the shortage of fossil fuels and the excessive pollution resulting from crude oil-based fuels has many adverse effects on the environment. The search for a greener and sustainable source of materials and fuels to power automobiles has ultimately led to the usage of biomass and biobased sources as the main precursor due to its graft availability and renewability. Biobased fuels developed have been shown to easily blend in with the existing automobile engines and to provide sustainable performance. Similarly, the usage of various biobased polymers, plastics, and composite materials as the structural materials for the construction of automobiles instead of crude oil sources have shown to be invaluable. The powering of automobiles with electricity is the future of the transportation industry to address the greenhouse gas emissions caused by fossil fuels. Hence, biobased lithium-ion batteries and supercapacitors have started to enter the mid-sized automotive industry. However, extensive commercialization of biobased products application in the automotive sector is underdeveloped. Hence it is customary to assess the various drawbacks of using biobased materials and identify the correct pathway for new research and development in this field. Therefore, this review covers various applications of biobased products in the automotive industries and mentions the active researches going on in this field to replace petroleum and crude oil-based sources with biobased sources.
Collapse
Affiliation(s)
- S M Prasanth
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India.
| | - S Harish
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India
| | - M Rishikesh
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, India
| | - Sonil Nanda
- Department of Chemical and Biological Engineering University of Saskatchewan, Saskatchewan, S7N 5A9, Canada
| | - Dai-Viet N Vo
- Center of Excellence for Green Energy and Environmental Nanomaterials (CE@GrEEN), Nguyen Tat Thanh University, Ho Chi Minh City, Viet Nam
| |
Collapse
|
20
|
Influence of Nutrient Manipulation on Growth and Biochemical Constituent in Anabaena variabilis and Nostoc muscorum to Enhance Biodiesel Production. SUSTAINABILITY 2021. [DOI: 10.3390/su13169081] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
The present study aims to improve biomass and biochemical constituents, especially lipid production of Anabaena variabilis and Nostoc muscorum by formulating an optimal growth condition using various concentrations of nutrients (NO3−, PO43− and CO32−) for biodiesel production. The supplementation of the three nutrients by +50% showed the maximum dry weight and biomass productivity, while the macromolecule contents were varied. The depletion of N-NO3− by 50% N-NO3− showed the maximum lipid yield (146.67 mg L−1) in A. variabilis and the maximum carbohydrate contents (285.33 mg L−1) in N. muscorum with an increase of 35% and 30% over control of the synthetic medium, respectively. However, variation in P-PO43− and C-CO32− showed insignificant improving results for all biochemical compositions in both cyanobacteria. A. variabilis was the superior species for lipid and protein accumulation; however, N. muscorum showed the maximum carbohydrate content. Accordingly, A. variabilis was selected for biodiesel production. In A. variabilis, −50% N-NO3− resulted in 35% higher lipid productivity compared to the control. Furthermore, the fatty acid profile and biodiesel quality-related parameters have improved under this condition. This study has revealed the strategies to improve A. variabilis lipid productivity for biodiesel production for small-scale in vitro application in terms of fuel quality under low nitrate levels.
Collapse
|
21
|
Lipid Extraction Maximization and Enzymatic Synthesis of Biodiesel from Microalgae. APPLIED SCIENCES-BASEL 2020. [DOI: 10.3390/app10176103] [Citation(s) in RCA: 16] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
Microalgae has received overwhelming attention worldwide as a sustainable source for energy generation. However, the production of biofuel from microalgae biomass consists of several steps, of which lipid extraction is the most important one. Because of the nature of feedstock, extraction needs special attention. Three different methods were studied to extract algal oil from two different algae variant, Chlorella sp. and Spirulina sp. The highest percentage oil yield was obtained by ultrasonication (9.4% for Chlorella sp., 6.6% for Spirulina sp.) followed by the Soxhlet and solvent extraction processes. Ultrasonication and Soxhlet extraction processes were further optimized to maximize oil extraction as solvent extraction was not effective in extracting lipid. For ultrasonication, an amplitude of 90% recorded the highest percentage yield of oil for Spirulina sp. and a 70% amplitude recorded the highest percentage yield of oil for Chlorella sp. On the other hand, for Soxhlet extraction, a combination of chloroform, hexane, and methanol at a 1:1:1 ratio resulted in the highest yield of algal oil. Afterward, the crude algae oil from the ultrasonication process was transesterified for 5 h using an immobilized lipase (Novozyme 435) at 40 °C to convert triglycerides into fatty acid methyl ester and glycerol. Thus, ultrasonic-assisted lipid extraction was successful in producing biodiesel from both the species.
Collapse
|
22
|
Osman MEH, Abo-Shady AM, Elshobary ME, Abd El-Ghafar MO, Abomohra AEF. Screening of seaweeds for sustainable biofuel recovery through sequential biodiesel and bioethanol production. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH INTERNATIONAL 2020; 27:32481-32493. [PMID: 32506400 DOI: 10.1007/s11356-020-09534-1] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2020] [Accepted: 05/29/2020] [Indexed: 02/05/2023]
Abstract
The present study evaluated the sequential biodiesel-bioethanol production from seaweeds. A total of 22 macroalgal species were collected at different seasons and screened based on lipid and carbohydrate contents as well as biomass production. The promising species was selected, based on the relative increase in energy compounds (REEC, %), for further energy conversion. Seasonal and annual biomass yields of the studied species showed significant variations. The rhodophyte Amphiroa compressa and the chlorophyte Ulva intestinalis showed the highest annual biomass yield of 75.2 and 61.5 g m-2 year-1, respectively. However, the highest annual carbohydrate productivity (ACP) and annual lipid productivity (ALP) were recorded for Ulva fasciata and Ulva intestinalis (17.0 and 3.0 g m-2 year-1, respectively). The later was selected for further studies because it showed 14.8% higher REEC value than Ulva fasciata. Saturated fatty acids (SAFs) showed 73.4%, with palmitic acid as a dominant fatty acid (43.8%). Therefore, biodiesel showed high saturation degree, with average degree of unsaturation (ADU) of 0.508. All the measured biodiesel characteristics complied the international standards. The first route of biodiesel production (R1) from Ulva intestinalis showed biodiesel recovery of 32.3 mg g-1 dw. The hydrolysate obtained after saccharification of the whole biomass (R2) and lipid-free biomass (R3) contained 1.22 and 1.15 g L-1, respectively, reducing sugars. However, bioethanol yield from R3 was 0.081 g g-1 dw, which represented 14.1% higher than that of R2. Therefore, application of sequential biofuel production using R3 resulted in gross energy output of 3.44 GJ ton-1 dw, which was 170.9% and 82.0% higher than R1 and R2, respectively. The present study recommended the naturally-grown Ulva intestinalis as a potential feedstock for enhanced energy recovery through sequential biodiesel-bioethanol production.
Collapse
Affiliation(s)
- Mohamed E H Osman
- Botany and Microbiology Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Atef M Abo-Shady
- Botany and Microbiology Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Mostafa E Elshobary
- Botany and Microbiology Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
- School of Food & Biological Engineering, Jiangsu University, Zhenjiang, 212013, China
| | - Mahasen O Abd El-Ghafar
- Botany and Microbiology Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt
| | - Abd El-Fatah Abomohra
- Botany and Microbiology Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt.
- Department of Environmental Engineering, School of Architecture and Civil Engineering, Chengdu University, Chengdu, 610106, China.
| |
Collapse
|
23
|
Advancing biodiesel production from microalgae Spirulina sp. by a simultaneous extraction–transesterification process using palm oil as a co-solvent of methanol. OPEN CHEM 2020. [DOI: 10.1515/chem-2020-0133] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022] Open
Abstract
AbstractMicroalgae have been considered as a potential candidate for biodiesel feedstock. Single-stage simultaneous extraction–transesterification process is proposed for simpler and more effective biodiesel conversion. In this study, the experiment of biodiesel production from microalgae Spirulina sp. was performed in a batch-stirred reactor using palm oil as a co-solvent of methanol and catalyzed by potassium hydroxide at a percentage of 1 wt% (w/w of palm oil). The effects of methanol–palm oil molar ratio, palm oil–microalgae weight ratio, and temperature on biodiesel yield were investigated. The results showed that the best biodiesel yield was 85.28% (99.01% of partial biodiesel yield from palm oil and 16.69% of partial biodiesel yield from dry microalgae), obtained at a methanol–palm oil molar ratio of 10:1, a palm oil–microalgae weight ratio of 5:1, and at a temperature of 60°C. Upon comparison, the overall yield increased by 34.59% (37.73% of partial biodiesel yield from palm oil and 13.00% of partial biodiesel yield from dry microalgae) than that of the two-stage (conventional) method. Single-stage simultaneous extraction–transesterification process also reduced the number of unsaturated fatty acid components in biodiesel that will lower the biodiesel quality.
Collapse
|
24
|
Environment-Friendly Biodiesel/Diesel Blends for Improving the Exhaust Emission and Engine Performance to Reduce the Pollutants Emitted from Transportation Fleets. INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH 2020; 17:ijerph17113896. [PMID: 32486369 PMCID: PMC7312013 DOI: 10.3390/ijerph17113896] [Citation(s) in RCA: 24] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/10/2020] [Revised: 05/25/2020] [Accepted: 05/29/2020] [Indexed: 11/17/2022]
Abstract
Biodiesel derived from biomass is a renewable source of fuel, and global application of biodiesel in the transport sector has rapidly expanded over the last decade. However, effort has been made to overcome its main shortcoming, i.e., efficiency and exhaust emission characteristics (NOx emissions) in unmodified diesel engines. Biodiesel combustion generally results in lower unburned hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) in exhaust emissions compared to fossil diesel. In this study, various biodiesel blends (Chlorella vulgaris, Jatropha curcus, and Calophyllum inophyllum) were investigated for fuel characteristics, and engine performance with exhaust emission compared to diesel. Chlorella vulgaris, Jatropha curcus, and Calophyllum inophyllum biodiesel were synthesized by the acid-base transesterification approach in a microwave reactor and blended with conventional diesel fuel by volume. The fuel blends were denoted as MB10 (90% diesel + 10% microalgae biodiesel), MB20 (80% diesel + 20% microalgae biodiesel), JB10 (90% diesel + 10% jatropha biodiesel), JB20 (80% diesel + 20% jatropha biodiesel), PB10 (90% diesel + 10% polanga biodiesel) and PB20 (80% diesel + 20% polanga biodiesel). Experiments were performed using these fuel blends with a single-cylinder four-stroke diesel engine at different loads. It was shown in the results that, at rated load, thermal efficiency of the engine decreased from 34.6% with diesel to 34.1%, 33.7%, 34.1%, 34.0%, 33.9%, and 33.5% with MB10, MB20, JB10, JB20, PB10, and PB20 fuels, respectively. Unburned hydrocarbon, carbon monoxide and smoke emissions improved with third-generation fuels (MB10, MB20) in comparison to base diesel fuel and second-generation fuels (JB10, JB20, PB10 and PB20). Oxides of nitrogen emissions were slightly increased with both the third- and second-generation fuels as compared to the base diesel. The combustion behavior of microalgae biodiesel was also very close to diesel fuels. In the context of comparable engine performance, emissions, and combustion characteristics, along with biofuel production yield (per year per acre), microalgae biodiesel could have a great potential as a next-generation sustainable fuel in compression engine (CI) engines compared to jatropha and polanga biodiesel fuels.
Collapse
|
25
|
Rajesh Banu J, Kavitha S, Gunasekaran M, Kumar G. Microalgae based biorefinery promoting circular bioeconomy-techno economic and life-cycle analysis. BIORESOURCE TECHNOLOGY 2020; 302:122822. [PMID: 32007307 DOI: 10.1016/j.biortech.2020.122822] [Citation(s) in RCA: 28] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/27/2019] [Revised: 01/12/2020] [Accepted: 01/13/2020] [Indexed: 06/10/2023]
Abstract
Microalgae are source of third generation biofuel having the key advantage of high lipid productivity. In recent times, biorefinery is seen as promising option to further reduce the production cost of microalgae biofuel. However, exact energy balance analysis has not been performed on important biorefinery routes. In this aspect, three biorefinery routes, all based on lipid based biorefinery route are evaluated for economical production of microalgal biofuel and valorised products. Biorefinery route 1 involves production of biodiesel, pigments, and animal feed. Biorefinery route 2 involves biogas and pigments production and two stage fermentation, and third biorefinery route involves bio-hydrogen and pigments production. Finally, the technoeconomic assessment of three biorefinery routes were reviewed, net energy savings, and life-cycle costing approaches to economize microalgal biorefinery are suggested.
Collapse
Affiliation(s)
- J Rajesh Banu
- Department of Civil Engineering, Anna University Regional Campus, Tirunelveli, India
| | - S Kavitha
- Department of Civil Engineering, Anna University Regional Campus, Tirunelveli, India
| | - M Gunasekaran
- Department of Physics, Anna University Regional Campus, Tirunelveli, India
| | - Gopalakrishnan Kumar
- Green Processing, Bioremediation and Alternative Energies Research Group, Faculty of Environment and Labour Safety, Ton Duc Thang University, Ho Chi Minh City, Viet Nam.
| |
Collapse
|
26
|
Techno-Economic Study of CO2 Capture of a Thermoelectric Plant Using Microalgae (Chlorella vulgaris) for Production of Feedstock for Bioenergy. ENERGIES 2020. [DOI: 10.3390/en13020413] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
A current concern is the increase in greenhouse gas emissions, mainly CO2, with anthropogenic sources being the main contributors. Microalgae have greater capacity than terrestrial plants to capture CO2, with this being an attraction for using them as capture systems. This study aims at the techno-economic evaluation of microalgae biomass production, while only considering technologies with industrial scaling potential. Energy consumption and operating costs are considered as parameters for the evaluation. In addition, the capture of CO2 from a thermoelectric plant is analyzed, as a carbon source for the cultivation of microalgae. 24 scenarios were evaluated while using process simulation tools (SuperPro Designer), being generated by the combination of cultivations in raceway pond, primary harvest with three types of flocculants, secondary harvest with centrifugation and three filtering technologies, and finally the drying evaluated with Spray and Drum Dryer. Low biomass productivity, 12.7 g/m2/day, was considered, achieving a capture of 102.13 tons of CO2/year in 1 ha for the cultivation area. The scenarios that included centrifugation and vacuum filtration are the ones with the highest energy consumption. The operating costs range from US $ 4.75–6.55/kg of dry biomass. The choice of the best scenario depends on the final use of biomass.
Collapse
|
27
|
Dasan YK, Lam MK, Yusup S, Lim JW, Lee KT. Life cycle evaluation of microalgae biofuels production: Effect of cultivation system on energy, carbon emission and cost balance analysis. THE SCIENCE OF THE TOTAL ENVIRONMENT 2019; 688:112-128. [PMID: 31229809 DOI: 10.1016/j.scitotenv.2019.06.181] [Citation(s) in RCA: 72] [Impact Index Per Article: 14.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/12/2019] [Revised: 06/02/2019] [Accepted: 06/12/2019] [Indexed: 06/09/2023]
Abstract
The rapid depletion of fossil fuels and ever-increasing environmental pollution have forced humankind to look for a renewable energy source. Microalgae, a renewable biomass source, has been proposed as a promising feedstock to generate biofuels due to their fast growth rate with high lipid content. However, literatures have indicated that sustainable production of microalgae biofuels are only viable with a highly optimized production system. In the present study, a cradle-to-gate approach was used to provide expedient insights on the effect of different cultivation systems and biomass productivity toward life cycle energy (LCEA), carbon balance (LCCO2) and economic (LCC) of microalgae biodiesel production pathways. In addition, a co-production of bioethanol from microalgae residue was proposed in order to improve the economic sustainability of the overall system. The results attained in the present work indicated that traditional microalgae biofuels processing pathways resulted to several shortcomings, such as dehydration and lipid extraction of microalgae biomass required high energy input and contributed nearly 21 to 30% and 39 to 57% of the total energy requirement, respectively. Besides, the microalgae biofuels production system also required a high capital investment, which accounted for 47 to 86% of total production costs that subsequently resulted to poor techno-economic performances. Moreover, current analysis of environmental aspects of microalgae biorefinery had revealed negative CO2 balance in producing microalgae biofuels.
Collapse
Affiliation(s)
- Yaleeni Kanna Dasan
- Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia; Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia
| | - Man Kee Lam
- Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia; Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia.
| | - Suzana Yusup
- Chemical Engineering Department, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia; Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia
| | - Jun Wei Lim
- Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia; Fundamental and Applied Sciences Department, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia
| | - Keat Teong Lee
- School of Chemical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, 14300 Nibong Tebal, Pulau Pinang, Malaysia
| |
Collapse
|
28
|
Khedri B, Mostafaei M, Safieddin Ardebili SM. Flow-mode synthesis of biodiesel under simultaneous microwave–magnetic irradiation. Chin J Chem Eng 2019. [DOI: 10.1016/j.cjche.2019.03.010] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/27/2022]
|
29
|
Fasciotti M, Souza GHMF, Astarita G, Costa ICR, Monteiro TVC, Teixeira CMLL, Eberlin MN, Sarpal AS. Investigating the Potential of Ion Mobility-Mass Spectrometry for Microalgae Biomass Characterization. Anal Chem 2019; 91:9266-9276. [DOI: 10.1021/acs.analchem.9b02172] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Affiliation(s)
- Maíra Fasciotti
- National Institute of Metrology, Quality and Technology (INMETRO), Division of Chemical and Thermal Metrology, Laboratory of Organic Analysis, 25250-020, Duque de Caxias, Rio de Janeiro, Brazil
- ThoMSon Mass Spectrometry Laboratory, Institute of Chemistry, University of Campinas − UNICAMP, 13083-970 Campinas, São Paulo, Brazil
| | - Gustavo H. M. F. Souza
- MS Applications and Development Laboratory, Waters Corporation, 06455-000 Barueri, São Paulo, Brazil
| | - Giuseppe Astarita
- Department of Biochemistry and Molecular and Cellular Biology, Georgetown University, Washington DC 20007, United States
| | - Ingrid C. R. Costa
- National Institute of Metrology, Quality and Technology (INMETRO), Division of Chemical and Thermal Metrology, Laboratory of Organic Analysis, 25250-020, Duque de Caxias, Rio de Janeiro, Brazil
| | - Thays. V. C. Monteiro
- National Institute of Metrology, Quality and Technology (INMETRO), Division of Chemical and Thermal Metrology, Laboratory of Organic Analysis, 25250-020, Duque de Caxias, Rio de Janeiro, Brazil
| | - Claudia M. L. L. Teixeira
- Microalgal Biotechnology Laboratory, National Institute of Technology (INT), 20081-312 Rio de Janeiro, Rio de Janeiro, Brazil
| | - Marcos N. Eberlin
- Mackenzie Presbyterian University, School of Engineering, 01302-907 São Paulo, São Paulo, Brazil
| | - Amarijt S. Sarpal
- National Institute of Metrology, Quality and Technology (INMETRO), Division of Chemical and Thermal Metrology, Laboratory of Organic Analysis, 25250-020, Duque de Caxias, Rio de Janeiro, Brazil
| |
Collapse
|
30
|
Yeom SH, Go YW. Optimization of a Novel Two-step Process Comprising Re-esterification and Transesterification in a Single Reactor for Biodiesel Production Using Waste Cooking Oil. BIOTECHNOL BIOPROC E 2018. [DOI: 10.1007/s12257-018-0209-5] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/28/2022]
|
31
|
Gong G, Meisi L, Zhang X, Tan T. Biodiesel preparation from microalgae lipid by two-step lipase catalysis. BIOCATAL BIOTRANSFOR 2017. [DOI: 10.1080/10242422.2017.1343305] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/19/2022]
Affiliation(s)
- Guiping Gong
- National Energy R and D Center for Biorefinery, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, China
| | - Linshuo Meisi
- National Energy R and D Center for Biorefinery, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, China
| | - Xu Zhang
- National Energy R and D Center for Biorefinery, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, China
| | - Tianwei Tan
- National Energy R and D Center for Biorefinery, College of Life Science and Technology, Beijing University of Chemical Technology, Beijing, China
| |
Collapse
|
32
|
Joshi G, Rawat DS, Sharma AK, Pandey JK. Microwave enhanced alcoholysis of non-edible (algal, jatropha and pongamia) oils using chemically activated egg shell derived CaO as heterogeneous catalyst. BIORESOURCE TECHNOLOGY 2016; 219:487-492. [PMID: 27521785 DOI: 10.1016/j.biortech.2016.08.011] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/30/2016] [Revised: 08/02/2016] [Accepted: 08/04/2016] [Indexed: 06/06/2023]
Abstract
Microwave enhanced fast and efficient alcoholysis (methanolysis and ethanolysis) of non-edible oils (algal, jatropha and pongamia) is achieved using chemically activated waste egg shell derived CaO (i.e. CaO(cesp)) as heterogeneous catalyst. CaO(cesp) was extracted from waste chicken egg shell and further activated chemically by supporting transition metal oxide. The maximum conversion was achieved using 3wt% catalysts under 700W microwave irradiation and 10:1 alcohol/oil ratio in 6min. Alcoholysis using ZnO activated CaO(cesp) catalyst has shown higher reaction yields in comparison to other modified catalysts. Methanolysis has shown better biodiesel conversion in comparison to ethanolysis. The catalyst has shown longer lifetime and sustained activity after being used for four cycles. Due to more saturated fatty acid content; algal biodiesel has shown improved fuel properties in comparison to other biodiesels.
Collapse
Affiliation(s)
- Girdhar Joshi
- Department of Research & Development, University of Petroleum & Energy Studies (UPES), Bidholi, Dehradun, India.
| | - Devendra S Rawat
- Department of Chemistry, University of Petroleum & Energy Studies (UPES), Bidholi, Dehradun, India
| | - Amit Kumar Sharma
- Biofuel Research Laboratory, University of Petroleum & Energy Studies (UPES), Bidholi, Dehradun, India
| | - Jitendra K Pandey
- Department of Research & Development, University of Petroleum & Energy Studies (UPES), Bidholi, Dehradun, India
| |
Collapse
|
33
|
|