Long-term performance of sediment microbial fuel cells with multiple anodes

Microalgae-bacteria nexus for environmental remediation and renewable energy resources: Advances, mechanisms and biotechnological applications

Microalgae and bacteria, known for their resilience, rapid growth, and proximate ecological partnerships, play fundamental roles in environmental and biotechnological advancements. This comprehensive review explores the synergistic interactions between microalgae and bacteria as an innovative approach to address some of the most pressing environmental issues and the demands of clean and renewable freshwater and energy sources. Studies indicated that microalgae-bacteria consortia can considerably enhance the output of biotechnological applications; for instance, various reports showed during wastewater treatment the COD removal efficiency increased by 40%-90.5 % due to microalgae-bacteria consortia, suggesting its great potential amenability in biotechnology. This review critically synthesizes research works on the microalgae and bacteria nexus applied in the advancements of renewable energy generation, with a special focus on biohydrogen, reclamation of wastewater and desalination processes. The mechanisms of underlying interactions, the environmental factors influencing consortia performance, and the challenges and benefits of employing these bio-complexes over traditional methods are also discussed in detail. This paper also evaluates the biotechnological applications of these microorganism consortia for the augmentation of biomass production and the synthesis of valuable biochemicals. Furthermore, the review sheds light on the integration of microalgae-bacteria systems in microbial fuel cells for concurrent energy production, waste treatment, and resource recovery. This review postulates microalgae-bacteria consortia as a sustainable and efficient solution for clean water and energy, providing insights into future research directions and the potential for industrial-scale applications.

The application of ferrous and graphitic N modified graphene-based composite cathode material in the bio-electro-Fenton system driven by sediment microbial fuel cells to degrade methyl orange

In this work, the ferrous (Fe2+) and graphitic N modified graphene-based composite cathode materials (N-rGO/Fe3O4) were developed through an in-situ reduction method, aiming to facilitate the two-electron pathway in the oxidation-reduction process. This approach generated a specific concentration of H2O2, enabling the construction of a sediment bio-electro-Fenton system using Fe2+ released from the cathode materials. Notably, this system operates without the need for proton exchange membranes. During the cathode material preparation, the utilization of Fe2+ as a reduction agent for graphene oxide (GO), triggered ammonia water to form graphitic N in graphene sheets. This addition enhanced the two-electron pathway, resulting in increased H2O2 production. Specifically, when the Fe2+ concentration was maintained at 0.1 mol/L, precise preparation of N-rGO/Fe3O4 occurred, leading to a maximum output voltage of 0.528 V and a maximum power density of 178.17 mW/m2. The degradation of methyl orange (MO) reached 68.91% within a 25-h period, a phenomenon contributed to the presence of graphitic N in the graphene sheets. H2O2, a byproduct of the two-electron pathway in cathode oxidation reduction reaction, played a crucial role in constructing the bio-electro-Fenton system. This system, in conjunction with Fe2+ released from N-rGO/Fe3O4, facilitated the complete degradation process of MO.

Methane emission reduction oriented extracellular electron transfer and bioremediation of sediment microbial fuel cell: A review

Sediment is the internal and external source of water environment pollution, so sediment remediation is the premise of water body purification. Sediment microbial fuel cell (SMFC) can remove the organic pollutants in sediment by electroactive microorganisms, compete with methanogens for electrons, and realize resource recycling, methane emission inhibiting and energy recovering. Due to these characteristics, SMFC have attracted wide attention for sediment remediation. In this paper, we comprehensively summarized the recent advances of SMFC in the following areas: (1) The advantages and disadvantages of current applied sediment remediation technologies; (2) The basic principles and influencing factors of SMFC; (3) The application of SMFC for pollutant removal, phosphorus transformation and remote monitoring and power supply; (4) Enhancement strategies for SMFC in sediments remediation such as SMFC coupled with constructed wetland, aquatic plant and iron-based reaction. Finally, we have summarized the drawback of SMFC and discuss the future development directions of applying SMFC for sediment bioremediation.

Effect of the degradation performance on carbon tetrachloride by anaerobic co-metabolism under different external energy sources

In this research, a comprehensive study was carried out on the removal of carbon tetrachloride (CT) in the anaerobic co-metabolism (ACM) reactor. The experiments showed that when the hydraulic retention time (HRT) was 36 h, pH was 7, and influent CT was 2.5mg/L, the average removal efficiency reached 82.45 ± 2.56% in the glucose co-metabolism substrate reactor, exhibiting a dramatic excellent difference in reaction performance from the other two reactors (p < 0.05) and a favorable tolerance on the CT shock loading. The content of extracellular polymeric substances (EPS) and volatile fatty acids (VFA) demonstrated that glucose could supply more energy to protect the microorganisms, which was the appropriate external energy source. Moreover, microbial community structure and biostatistics analysis demonstrated that Pseudomonas was the most important dechlorination bacteria in ACM reactors, which might via dehalogenation process mediate the transformation of CT. The succession of methanogenic bacteria further demonstrated that CT degradation using co-digestion require to destroy hydrogenotrophic methane generation pathway and the external energy substances could make up the lack of hydrogen in the treatment of CT. The change of intermediate products hinted that anaerobic dechlorination process of CT in an ACM reactor was a sequential dechlorination process, and major transformation products measured were CF. Overall, this study has improved our understanding of the roles of CT degradation process in ACM reactors.

Effects of water flow on performance of soil microbial fuel cells: Electricity generation, benzo[a]pyrene removal, microbial community and molecular ecological networks

Soil microbial fuel cells with water flow (W-SMFCs) as a driven force of substrate transport were constructed. Electricity generation, benzo[a]pyrene (BaP) removal, microbial communities and microbial molecular ecological networks were compared between W-SMFCs and their control reactors (without water flow, C-SMFCs) in 240 days of operation. The W-SMFCs started up faster than C-SMFCs (37 days vs. 50 days) and output higher startup voltage (148.45 mV vs. 111.90 mV). The water flow caused higher removal efficiency of BaP at sites >1 cm from the anode (S _{> 1 cm}) than at sites <1 cm from the anode (S _{< 1 cm}) in W-SMFCs, whereas in C-SMFCs, the removal efficiency of BaP at S_{< 1 cm} was higher than that at S_{> 1 cm}. The removal efficiency of BaP at S_{> 1 cm} in W-SMFCs was up to 1.7 times higher than that at S_{> 1 cm} in C-SMFCs on the 91^st day. After 240 days of operation, the biodegradation efficiency of absolute BaP amount was 45.95% in W-SMFCs, being 20% higher than that in C-SMFCs (38.17%). Moreover, the water flow caused highly tight interaction among the microbial species, which could be beneficial to BaP biodegradation. Conclusively, the water flow in soil was very beneficial for startup and biodegradation of BaP in SMFCs.

On-line monitoring of minor oil spills in natural waters using sediment microbial fuel cell sensors equipped with vertical floating cathodes

Oil spills near natural water bodies pose considerable threats to aquatic ecosystem and drinking water system. Various detection techniques have been developed to identify the oil pollution in natural waters. These techniques mainly focus on large and major oil spills involving significant changes in environmental characteristics. However, monitoring of minor oil spills (from seepage and dripping) in waters remains a bottleneck, allowing inconspicuous and persistent oil contamination. To overcome this drawback, a sediment microbial fuel cell (SMFC) sensor equipped with a vertical floating cathode is developed for on-line and in-situ monitoring of minor oil spills in natural waters. The vertical floating cathode was intended for recognizing oil on water surface. Oil on the cathode will trigger current drop. Two kinds of natural sediments were adopted in two sensors (SMFC1 from a lake and SMFC2 from an urban stream) for comparison. Both showed linear relationship between net steady-state current decrease and oil dose (30.78 and 27.29 μA/mL of sensitivity, respectively). The current change process was fitted well to a pseudo-first order kinetic equation. A one-point/two-point dynamic identification methods were derived from the kinetic equation. Therefore, the detection time was shortened from 10 h to 10/30 min. The triggered current decrease was mainly attributed to the increase in internal resistance related to charge and mass transfer. Despite the power loss after oil contamination, results implied SMFC sensor could still achieve self-sustainability. This study shows that the SMFC sensor with vertical floating cathodes is applicable to monitoring the unnoticeable minor oil pollutions in natural waters.

Organic matter composition, BaP biodegradation and microbial communities at sites near and far from the bioanode in a soil microbial fuel cell

Bioanodes in a soil microbial fuel cell (SMFC) can serve as sustainable electron acceptors in microbial metabolism processes; thus, SMFCs are considered a promising in situ bioremediation technology. Most related studies have focused on the removal efficiency of contaminants. Relatively few efforts have been made to comprehensively investigate the organic matter composition and biodegradation metabolites of organic contaminants and microbial communities at various distances from the bioanode. In this study, the level and composition of dissolved organic matter (DOM), biodegradation metabolites of benzo[a]pyrene (BaP), and microbial communities at two sites with different distances (S_1cm and S_11cm) to the bioanode were investigated in an SMFC. The consumption efficiency of dissolved organic carbon (R_DOC) and removal efficiency of BaP (R_BaP) at S_1cm were slightly higher than those at S_11cm after 100 days (R_DOC 47.82 ± 5.77% at S_1cm and 44.98 ± 10.76% at S_11cm; R_BaP 72.52 ± 1.88% at S_1cm and 68.50 ± 4.34% at S_11cm). More fulvic acid-like components and more low-molecular-weight metabolites (indicating a higher biodegradation degree) of BaP were generated at S_1cm than at S_11cm. The microbial community structures were similar at the two sites. Electroactive bacteria (EAB) and some polycyclic aromatic hydrocarbon degraders were both enriched at the bioanode. Energy metabolism at the bioanode could be upregulated to generate more adenosine triphosphate (ATP). In conclusion, the bioanode could modulate the metabolic pathways in the adjacent soil by strengthening the contact between the EAB and BaP degraders, and providing more ATP to the BaP degraders.

Valorisation and emerging perspective of biomass based waste-to-energy technologies and their socio-environmental impact: A review

The economic developments around the globe resulted in the increased demand of energy, which overburdened the supply chain sources of energy. Fossil fuel reserves are exploited to meet the high demand of energy and their combustion is becoming the main source of environmental pollution. So there is dire need to find safe, renewable and sustainable energy resources. Waste to energy (WtE) may be viewed as a possible alternate source of energy, which is economically and environmentally sustainable. Municipal solid waste (MSW) is a major contributor to the development of renewable energy and sustainable environment. At present the scarcity of renewable energy resources and disposal of MSW is a challenging problem for the developing countries, which has generated a wide ranging socioeconomic and environmental problems. This situation stimulates the researchers to develop alternatives for converting WtE under a variety of scenarios. Herein, the present scenario in developing the WtE technologies such as, thermal conversion methods (Incineration, Gasification, Pyrolysis, Torrefaction), Plasma technology, Biochemical methods, Chemical and Mechanical methods, Bio-electrochemical process, Mechanical biological treatment (MBT), Photo-biological processes for efficacious energy recovery and the challenges confronted by developing and developed countries. In this review, a framework for the evaluation of WtE technologies has been presented for the ease of researchers working in the field. Furthermore, this review concluded that WtE is a potential renewable energy source that will partially satisfy the demand for energy and ensure an efficient MSW management to overcome the environmental pollution.

Floating treatment wetlands integrated with microbial fuel cell for the treatment of urban wastewaters and bioenergy generation

The objective of the present study was to develop a combined system composed of anaerobic biofilter (AF) and floating treatment wetlands (FTW) coupled with microbial fuel cells (MFC) in the buoyant support for treating wastewater from a university campus and generate bioelectricity. The raw wastewater was pumped to a 1450 L tank, operated in batch flow and filled with plastic conduits. The second treatment stage was composed of a 1000 L FTW box with a 200 L plastic drum inside (acting as settler in the entrance) and vegetated with mixed ornamental plants species floating in a polyurethane support fed once a week with 700 L of wastewater. In the plant roots, graphite rods were placed to act as cathodes, while on the bottom of the box 40 graphite sticks inside a plastic hose with a stainless-steel cable acting as the anode chamber. Open circuit voltages were daily measured for 6 weeks, and later as closed circuit with the connection of 1000 Ω resistors. Plant harvestings were conducted, in which biomass production and plant uptake from each of the species were measured. On average, system was efficient in reducing BOD₅ (55.1%), COD (71.4%), turbidity (90.9%) and total coliforms (99.9%), but presented low efficiencies regarding total N (8.4%) and total P (11.4%). Concerning bioenergy generation, voltage peaks and maximum power density were observed on the feeding day, reaching 225 mV and 0.93 mW/m², respectively, and in general decaying over the 7 days. In addition, plant species with larger root development presented higher voltage values than plants with the smaller root systems, possible because of oxygen release. Therefore, the combined system presented potential of treating wastewater and generating energy by integrating FTW and MFC, but further studies should investigate the FTW-MFC combination in order to improve its treatment performance and maximize energy generation.

Microorganisms in sediment microbial fuel cells: Ecological niche, microbial response, and environmental function

A sediment microbial fuel cell (SMFC) is a device that harvests electrical energy from sediments rich in organic matter. SMFCs have been attracting increasing amounts of interest in environmental remediation, since they are capable of providing a clean and inexhaustible source of electron donors or acceptors and can be easily controlled by adjusting the electrochemical parameters. The microorganisms inhabiting sediments and the overlying water play a pivotal role in SMFCs. Since the SMFC is applied in an open environment rather than in an enclosed chamber, the effects of the environment on the microbes should be intense and the microbial community succession should be extremely complex. Thus, this review aims to provide an overview of the microorganisms in SMFCs, which few previous review papers have reported. In this study, the anodic and cathodic niches for the microorganisms in SMFCs are summarized, how the microbial population and community interact with the SMFC environment is discussed, a new microbial succession strategy called the electrode stimulation succession is proposed, and recent developments in the environmental functions of SMFCs are discussed from the perspective of microorganisms. Future studies are needed to investigate the electrode stimulation succession, the environmental function and the electron transfer mechanism in order to boost the application of SMFCs for power generation and environmental remediation.

The Utility of Electrochemical Systems in Microbial Degradation of Polycyclic Aromatic Hydrocarbons: Discourse, Diversity and Design

Polycyclic aromatic hydrocarbons (PAHs), especially high molecular weight PAHs, are carcinogenic and mutagenic organic compounds that are difficult to degrade. Microbial remediation is a popular method for the PAH removal in diverse environments and yet it is limited by the lack of electron acceptors. An emerging solution is to use the microbial electrochemical system, in which the solid anode is used as an inexhaustible electron acceptor and the microbial activity is stimulated by biocurrent in situ to ensure the PAH removal and avoid the defects of bioremediation. Based on the extensive investigation of recent literatures, this paper summarizes and comments on the research progress of PAH removal by the microbial electrochemical system of diversified design, enhanced measures and functional microorganisms. First, the bioelectrochemical degradation of PAHs is reviewed in separate and mixed PAH degradation, and the removal performance of PAHs in different system configurations is compared with the anode modification, the enhancement of substrate and electron transfer, the addition of chemical reagents, and the combination with phytoremediation. Second, the key functional microbiota including PAH degrading microbes and exoelectrogens are overviewed as well as the reduced microbes without competitive advantage. Finally, the typical representations of electrochemical activity especially the internal resistance, power density and current density of systems and influence factors are reviewed with the correlation analysis between PAH removal and energy generation. Presently, most studies focused on the anode modification in the bioelectrochemical degradation of PAHs and actually more attentions need to be paid to enhance the mass transfer and thus larger remediation radius, and other smart designs are also proposed, especially that the combined use of phytoremediation could be an eco-friendly and sustainable approach. Additionally, exoelectrogens and PAH degraders are partially overlapping, but the exact functional mechanisms of interaction network are still elusive, which could be revealed with the aid of advanced bioinformatics technology. In order to optimize the efficacy of functional community, more advanced techniques such as omics technology, photoelectrocatalysis and nanotechnology should be considered in the future research to improve the energy generation and PAH biodegradation rate simultaneously.

Fusobacterium nucleatum Causes Microbial Dysbiosis and Exacerbates Visceral Hypersensitivity in a Colonization-Independent Manner

Background: Microbial dysbiosis is closely associated with visceral hypersensitivity and is involved in the pathogenesis of irritable bowel syndrome (IBS), but the specific strains that play a key role have yet to be identified. Previous bioinformatic studies have demonstrated that Fusobacterium is a shared microbial feature between IBS patients and maternal separation (MS)-stressed rats. In this study, we assessed the potential role of Fusobacterium nucleatum (F. nucleatum) in the pathogenesis of IBS.

Methods: Fecal samples of patients with diarrhea predominant-IBS (IBS-D) and healthy controls were obtained. An MS rat model was established to receive gavage of either F. nucleatum or normal saline. Visceral sensitivity was evaluated through colorectal distension test, and fecal microbiota was analyzed by 16S rRNA gene sequencing. F. nucleatum-specific IgA levels in fecal supernatants were assessed by western blotting. The antigen reacted with the specific IgA of F. nucleatum was identified by mass spectrometry and the construction of a recombinant Escherichia coli BL21 (DE3).

Results: IBS-D patients showed a lower Shannon index and a higher abundance of Fusobacterium. The F. nucleatum-gavage was shown to exacerbate visceral hypersensitivity in MS rats, with both the F. nucleatum-gavage and MS causing a decreased Shannon index and a clear segregation of fecal microbiota. In addition, specific IgA against F. nucleatum was detected in fecal supernatants of both the F. nucleatum-gavaged rats and the IBS-D patients. The FomA protein, which is a major outer membrane protein of F. nucleatum, was confirmed to react with the specific IgA of F. nucleatum in fecal supernatants.

Conclusion:Fusobacterium increased significantly in IBS-D patients, and F. nucleatum was involved in the pathogenesis of IBS by causing microbial dysbiosis and exacerbating visceral hypersensitivity in a colonization-independent manner. Meanwhile, F. nucleatum was found to induce an increase in specific secretory IgA through FomA.

Development and life cycle assessment of an auto circulating bio-electrochemical reactor for energy positive continuous wastewater treatment

Bioelectrochemical systems like microbial fuel cells (MFCs) are quaint systems known to metamorphose the chemical energy of organic matter into electrical energy using catalytic activity of microorganisms. A novel continuous Auto Circulating Bio-Electrochemical Reactor (AutoCirBER) was developed to fulfil the gap of 'simple, inexpensive and compact design' that can continuously treat larger amount of organic wastewater at shorter residence time and without consuming external energy for liquid mixing. AutoCirBER eliminated the need for external agitation for liquid-mixing and therefore, energy requirements. AutoCirBER was operated in continuous-mode and hydraulic retention time was optimized. The reactor underwent performance check-up viz. COD removal, net power output, columbic efficiency, sludge generation and an attributional life cycle assessment (LCA) was also conducted. AutoCirBER was sustainable to run in continuous-mode and showed more than 90.4% of COD removal, and 59.55 W.h net annual energy recovery. Experimental LCA of AutoCirBER also displays its environmental feasibility in longer run.

Carbon nanomaterial-modified graphite felt as an anode enhanced the power production and polycyclic aromatic hydrocarbon removal in sediment microbial fuel cells

Sediment microbial fuel cells (SMFCs) can be used to generate electricity and remove organic contaminants. For electricity generation and contaminant removal, the anode material is one of important factors influencing the performance of SMFCs. In this study, graphene (GR), graphene oxide (GO) and carbon nanotubes (CNTs) were applied to modify the graphite felt (GF) anode in SMFCs during 110 d operation. An economical and easy modification method with the carbon nanomaterials was applied. The carbon nanomaterials increased the electrochemically active surface areas and biomass content of the anodes and correspondingly effectively enhanced the generation of electricity and the removal rates of loss on ignition (LOI) and polycyclic aromatic hydrocarbons (phenanthrene and pyrene). During the steady period from 50 d to 110 d, the GO-SMFCs favored the enrichment of EAB and thus output the highest voltages of 30.60-48.61 mV. The GR-SMFCs and GO-SMFCs generated high electric power of approximate 0.98 ± 0.14 kJ and 0.87 ± 0.04 kJ, followed by CNT-SMFCs (0.57 ± 0.06 kJ) and GF-SMFCs (0.49 ± 0.07 kJ) during the 110 d operation. The PAH degradation was not directly related to the electric current in the SMFCs. Near the anodes, the order of the phenanthrene removal rates was CNT-SMFCs (78.1%) > GR-SMFCs (73.0%) ≈ GO-SMFCs (71.2%) > GF-SMFCs (45.6%), and the order of the pyrene removal rates was GO-SMFCs (69.6%) ≈ GR-SMFCs (68.2%) ≈ CNT-SMFCs (66.7%) > GF-SMFCs (42.3%). The three carbon nanomaterials increased the microbial community diversity and slightly changed the microbial community distribution of biofilms on the anodes. Correlation analysis indicated that the degradation of phenanthrene was positively correlated with the abundances of Pseudomonas, Thauera, Diaphorobacter, Tumebacillus and Lysobacter. Pyrene degradation was strongly correlated with LOI degradation.

Increased power production and removal efficiency of polycyclic aromatic hydrocarbons by plant pumps in sediment microbial electrochemical systems: A preliminary study

The low mass transfer of sediment substrates has limited the efficiency and application of a sediment microbial electrochemical system (SMES) as a power generator and as a practical bioremediation technology. In this study, we designed a new plant-driven SMES (New-PSMES) with a separated sand-filled anode column in order to improve the mass transfer and thereby enhance the microorganism activity, power generation and bioremediation range and efficiency for polycyclic aromatic hydrocarbons (PAHs). Because of the mass flow driven by the plants, the New-PSMESs started up approximately 7 d earlier and produced voltages 30-70 mV higher than the planted SMESs, and had greater enzyme activities and residual organic carbon than the unplanted and planted SMESs. In the New-PSMES, the total mass removal rates of phenanthrene and pyrene were 62.98% and 57.02% after 82 d, and these values were 1.5-2 times higher than those of the unplanted and planted SMESs. The removal of PAHs in the sediment was primarily attributed to nonelectrochemical biodegradation at sites far from the anode and to electrochemical reactions on the anode. The top three most abundant phyla in all samples were Proteobacteria, Chloroflexi, and Bacteroidetes. Aerobic bacteria, such as Nautella, were enriched in the biofilms of the New-PSMESs.

Construction of a Self-Powered System for Simultaneous In Situ Remediation of Nitrate and Cr(VI) Contaminated Synthetic Groundwater and River Sediment

A novel self-powered system was constructed to in situ remove nitrate and Cr(VI) from synthetic groundwater and achieve river sediment remediation simultaneously. The sediment organic matter in an anodic chamber was used as a carbon source to provide self-powered energy to reduce the cathode’s contaminants. With the acceptance of protons and electrons, nitrate and Cr(VI) were transformed into nitrite and Cr(III), respectively. In a 72 h test with both nitrate and Cr(VI) present, nitrate was removed at a rate of 70.96 mg/m3·h and Cr(VI) at a rate of 8.95 mg/m3·h. When a phosphate buffer was used in the test, their removal rates were changed to 140.83 mg/m3·h and 8.33 mg/m3·h, respectively. The results showed that the self-powered system could achieve the simultaneous reduction of nitrate and Cr(VI), although the presence of Cr(VI) hindered nitrate reduction. This system could realize simultaneous in situ groundwater and sediment remediation, with no need for additional energy or materials.

Harnessing a methane-fueled, sediment-free mixed microbial community for utilization of distributed sources of natural gas

Harnessing the metabolic potential of uncultured microbial communities is a compelling opportunity for the biotechnology industry, an approach that would vastly expand the portfolio of usable feedstocks. Methane is particularly promising because it is abundant and energy‐rich, yet the most efficient methane‐activating metabolic pathways involve mixed communities of anaerobic methanotrophic archaea and sulfate reducing bacteria. These communities oxidize methane at high catabolic efficiency and produce chemically reduced by‐products at a comparable rate and in near‐stoichiometric proportion to methane consumption. These reduced compounds can be used for feedstock and downstream chemical production, and at the production rates observed in situ they are an appealing, cost‐effective prospect. Notably, the microbial constituents responsible for this bioconversion are most prominent in select deep‐sea sediments, and while they can be kept active at surface pressures, they have not yet been cultured in the lab. In an industrial capacity, deep‐sea sediments could be periodically recovered and replenished, but the associated technical challenges and substantial costs make this an untenable approach for full‐scale operations. In this study, we present a novel method for incorporating methanotrophic communities into bioindustrial processes through abstraction onto low mass, easily transportable carbon cloth artificial substrates. Using Gulf of Mexico methane seep sediment as inoculum, optimal physicochemical parameters were established for methane‐oxidizing, sulfide‐generating mesocosm incubations. Metabolic activity required >∼40% seawater salinity, peaking at 100% salinity and 35 °C. Microbial communities were successfully transferred to a carbon cloth substrate, and rates of methane‐dependent sulfide production increased more than threefold per unit volume. Phylogenetic analyses indicated that carbon cloth‐based communities were substantially streamlined and were dominated by Desulfotomaculum geothermicum. Fluorescence in situ hybridization microscopy with carbon cloth fibers revealed a novel spatial arrangement of anaerobic methanotrophs and sulfate reducing bacteria suggestive of an electronic coupling enabled by the artificial substrate. This system: 1) enables a more targeted manipulation of methane‐activating microbial communities using a low‐mass and sediment‐free substrate; 2) holds promise for the simultaneous consumption of a strong greenhouse gas and the generation of usable downstream products; and 3) furthers the broader adoption of uncultured, mixed microbial communities for biotechnological use.