Semi-continuous production of high-activity pectinases by immobilized Rhizopus oryzae using tobacco wastewater as substrate and their utilization in the hydrolysis of pectin-containing lignocellulosic biomass at high solid content

Improved bacterial cellulose production by Acetobacter oryzoeni MGC-N8819 in tobacco waste extract coupled with nicotine removal by Pseudomonas sp. JY-Q/5∆

As the substrate, tobacco waste extract (TWE) can produce bacterial cellulose (BC), a biobased material. However, nicotine inhibits BC production (adding 0.8 g/L nicotine to the HS medium had a negative effect on BC synthesis) and needs to be removed. In this study, BC production by Acetobacter oryzoeni MGC-N8819 was carried out in four dilutions (5 %, 10 %, 15 %, and 20 %) of TWE. 15 % TWE without nicotine removal resulting in a 3.27 g/L BC production. Considering the inhibitor effect of nicotine on BC synthesis. Pseudomonas sp. JY-Q/5∆, an efficient nicotine-degrading mutant strain without the ability of glucose consumption, was statically co-cultured with MGCN8819, and the BC production was increased to 4.61 g/L after 7 days of cultivation. To eliminate the limitation of insufficient oxygen supply, BC films were harvested on day 7 and cultured for an additional 5 days resulting in a 6.00 g/L final BC production. Remarkably, the co-culture of MGC-N8819 and JY-Q/5∆ improved BC properties in terms of fiber diameter (28 nm), mechanical properties (tensile strength to 67 MPa and elongation at break to 23 %), and thermal stability (the maximum decomposition temperature was 600 °C). This study suggests a valuable strategy for improving BC production using agricultural waste.

A new alkaline pectin lyase with novel thermal and pH stability from Bacilus velezensis

Pectin lyases are important in various industries, including tobacco leaves processing. In this paper, a novel pectin lyase Pel04 from Bacillus velezensis was characterized. Pel04 molecular weight (Mw) and isoelectric point (pI) of the protein sequence after removing the signal peptide are 43.0 kDa. The optimal temperature and pH of Pel04 is 50 °C and 9.0, respectively. Pel04 was stable in the range of 30-50 °C, and pH 9.5-11. Ca2+ can significantly stimulate the enzyme activity, while Cu2+, Co2+, Fe3+, and Mn2+ have inhibitory effects on Pel04. By Pel04 treatment, the overall content of acids, alcohols, esters and other aromas in tobacco leaves increased, while the contents of phenolic and heterocyclic substances decreased. Pel04 has important potential for industrial application particularly in improving quality of tobacco leaves.

Contribution of pectin-degrading bacteria to the quality of cigar fermentation: an analysis based on microbial communities and physicochemical components

Objective

This study aims to investigate the effects of pectin-degrading bacteria on the microbial community and physicochemical properties during the fermentation process of cigar tobacco, evaluating its potential in reducing green bitterness and enhancing aroma.

Methods

By isolating and screening pectin-degrading bacteria, high-throughput sequencing and physicochemical analysis were employed to compare the microbial flora and physicochemical component differences in different treatment groups of cigar tobacco. Furthermore, correlation analysis was performed to examine the relationships between these variables.

Results

The results showed that the strains YX-2 and DM-3, isolated from the cigar tobacco variety "Yunxue No. 1," exhibited strong pectin-degrading abilities. Phylogenetic analysis revealed that strain YX-2 is highly homologous to Bacillus flexus, while strain DM-3 is highly homologous to Bacillus siamensis. After fermentation, the addition of strains YX-2 and DM-3 significantly reduced the pectin content in the tobacco leaves, increased the total sugar and reducing sugar content, reduced green bitterness, and markedly enhanced the total aroma components. Notably, DM-3 exhibited outstanding performance in the production of Maillard reaction products. Microbial community analysis showed that the addition of pectin-degrading bacteria significantly increased the diversity of both bacteria and fungi, especially in the TDM3 group, where the relative abundance of Pseudomonas was notably elevated. Correlation analysis revealed that Pseudomonas had a significant positive correlation with both reducing sugar and total sugar, and a significant negative correlation with pectin, indicating its important role in sugar metabolism and pectin degradation. Additionally, fungal genera such as Cercospora were significantly negatively correlated with total sugar and total nitrogen, while Eurotium was closely associated with pectin degradation and reducing sugar accumulation.

Conclusion

This study found that the addition of Pectin-degrading bacteria YX-2 and DM-3 significantly optimized the microbial community structure during the cigar tobacco fermentation process and improved the physicochemical properties of the tobacco leaves, with notable effects in reducing green bitterness and enhancing aroma.

Tobacco as bioenergy and medical plant for biofuels and bioproduction

Tobacco, a widely cultivated crop, has been extensively utilized by humans for an extended period. However, the tobacco industry generates a significant amount of organic waste, and the effective utilization of this tobacco waste has been limited. Currently, most tobacco waste is either recycled as reconstituted tobacco sheets or disposed of in landfills. However, tobacco possesses far more potential value than just these applications. This article provides an overview of the diverse uses of tobacco waste in agriculture, medicine, chemical engineering, and energy sectors. In the realm of agriculture, tobacco waste finds primary application as fertilizers and pesticides. In medical applications, the bioactive compounds present in tobacco are fully harnessed, resulting in the production of phenols, solanesol, polysaccharides, proteins, and even alkaloids. These bioactive compounds exhibit beneficial effects on human health. Additionally, the applications of tobacco waste in chemical engineering and energy sectors are centered around the utilization of lignocellulosic compounds and certain fuels. Chemical platform compounds derived from tobacco waste, as well as selected fuel sources, play a significant role in these areas. The rational utilization of tobacco waste represents a promising prospect, particularly in the present era when sustainable development is widely advocated. Moreover, this approach holds significant importance for enhancing energy utilization.

Application of Thermomyces lanuginosus polygalacturonase produced in Komagataella phaffii in biomass hydrolysis and textile bioscouring

In this work, the polygalacturonase (TL-PG1) from the thermophilic fungus Thermomyces lanuginosus was heterologously produced for the first time in the yeast Komagataella phaffii. The TL-PG1 was successfully expressed under the control of the AOX1 promoter and sequentially purified by His-tag affinity. The purified recombinant pectinase exhibited an activity of 462.6 U/mL toward polygalacturonic acid under optimal conditions (pH 6 and 55 ˚C) with a 2.83 mg/mL and 0.063 μmol/minute for Km and Vmax, respectively. When used as supplementation for biomass hydrolysis, TL-PG1 demonstrated synergy with the enzymatic cocktail Ctec3 to depolymerize orange citrus pulp, releasing 1.43 mg/mL of reducing sugar. In addition, TL-PG1 exhibited efficiency in fabric bioscouring, showing potential usage in the textile industry. Applying a protein dosage of 7 mg/mL, the time for the fabric to absorb water was 19.77 seconds (ten times faster than the control). Adding the surfactant Triton to the treatment allowed the reduction of the enzyme dosage by 50% and the water absorption time to 6.38 seconds. Altogether, this work describes a new versatile polygalacturonase from T. lanuginosus with the potential to be employed in the hydrolysis of lignocellulosic biomass and bioscouring.

Lignocellulosic biomass-based glycoconjugates for diverse biotechnological applications

Glycoconjugates are the ubiquitous components of mammalian cells, mainly synthesized by covalent bonds of carbohydrates to other biomolecules such as proteins and lipids, with a wide range of potential applications in novel vaccines, therapeutic peptides and antibodies (Ab). Considering the emerging developments in glycoscience, renewable production of glycoconjugates is of importance and lignocellulosic biomass (LCB) is a potential source of carbohydrates to produce synthetic glycoconjugates in a sustainable pathway. In this review, recent advances in glycobiology aiming on glycoconjugates production is presented together with the recent and cutting-edge advances in the therapeutic properties and application of glycoconjugates, including therapeutic glycoproteins, glycosaminoglycans (GAGs), and nutraceuticals, emphasizing the integral role of glycosylation in their function and efficacy. Special emphasis is given towards the potential exploration of carbon neutral feedstocks, in which LCB has an emerging role. Techniques for extraction and recovery of mono- and oligosaccharides from LCB are critically discussed and influence of the heterogeneous nature of the feedstocks and different methods for recovery of these sugars in the development of the customized glycoconjugates is explored. Although reports on the use of LCB for the production of glycoconjugates are scarce, this review sets clear that the potential of LCB as a source for the production of valuable glycoconjugates cannot be underestimated and encourages that future research should focus on refining the existing methodologies and exploring new approaches to fully realize the potential of LCB in glycoconjugate production.

Fungal pectinases: an insight into production, innovations and applications

The fungal system holds morphological plasticity and metabolic versatility which makes it unique. Fungal habitat ranges from the Arctic region to the fertile mainland, including tropical rainforests, and temperate deserts. They possess a wide range of lifestyles behaving as saprophytic, parasitic, opportunistic, and obligate symbionts. These eukaryotic microbes can survive any living condition and adapt to behave as extremophiles, mesophiles, thermophiles, or even psychrophile organisms. This behaviour has been exploited to yield microbial enzymes which can survive in extreme environments. The cost-effective production, stable catalytic behaviour and ease of genetic manipulation make them prominent sources of several industrially important enzymes. Pectinases are a class of pectin-degrading enzymes that show different mechanisms and substrate specificities to release end products. The pectinase family of enzymes is produced by microbial sources such as bacteria, fungi, actinomycetes, plants, and animals. Fungal pectinases having high specificity for natural sources and higher stabilities and catalytic activities make them promising green catalysts for industrial applications. Pectinases from different microbial sources have been investigated for their industrial applications. However, their relevance in the food and textile industries is remarkable and has been extensively studied. The focus of this review is to provide comprehensive information on the current findings on fungal pectinases targeting diverse sources of fungal strains, their production by fermentation techniques, and a summary of purification strategies. Studies on pectinases regarding innovations comprising bioreactor-based production, immobilization of pectinases, in silico and expression studies, directed evolution, and omics-driven approaches specifically by fungal microbiota have been summarized.

Metaproteomics reveals enzymatic strategies deployed by anaerobic microbiomes to maintain lignocellulose deconstruction at high solids

Economically viable production of cellulosic biofuels requires operation at high solids loadings—on the order of 15 wt%. To this end we characterize Nature’s ability to deconstruct and utilize mid-season switchgrass at increasing solid loadings using an anaerobic methanogenic microbiome. This community exhibits undiminished fractional carbohydrate solubilization at loadings ranging from 30 g/L to 150 g/L. Metaproteomic interrogation reveals marked increases in the abundance of specific carbohydrate-active enzyme classes. Significant enrichment of auxiliary activity family 6 enzymes at higher solids suggests a role for Fenton chemistry. Stress-response proteins accompanying these reactions are similarly upregulated at higher solids, as are β-glucosidases, xylosidases, carbohydrate-debranching, and pectin-acting enzymes—all of which indicate that removal of deconstruction inhibitors is important for observed undiminished solubilization. Our work provides insights into the mechanisms by which natural microbiomes effectively deconstruct and utilize lignocellulose at high solids loadings, informing the future development of defined cultures for efficient bioconversion.

Mucoromycota fungi as powerful cell factories for modern biorefinery

Biorefinery employing fungi can be a strategy for valorizing low-cost rest materials, by-products and wastes into several valuable bioproducts through the fungal fermentation. Mucoromycota fungi are soil fungi with a highly versatile metabolic system that positions them as powerful microbial cell factories for biorefinery applications. Lipids, pigments, chitin/chitosan, polyphosphates, ethanol, organic acids and enzymes are main Mucoromycota products that can be refined from the fermentation process and applied in nutrition, chemical or biofuel industries. In addition, Mucoromycota biomass can be used as it is for specific purposes, such as feed. Mucoromycota fungi can be employed in developing co-production processes, whereby several intra- and extracellular products are simultaneously formed in a single fermentation process, and, thus, economic viability of the process can be improved. This mini review provides a comprehensive overview over the recent advances in the production of valuable metabolites by Mucoromycota fungi and fermentation strategies which could be potentially applied in the industrial biorefinery settings. KEY POINTS: • Biorefineries utilizing Mucoromycota fungi as production cell factories can provide a wide range of bioproducts. • Mucoromycota fungi are able to perform co-production of various metabolites in a single fermentation process. • Versatile metabolism of Mucoromycota allows valorization of a various low-cost substrates such as wastes and rest materials.

New insights in pectinase production development and industrial applications

Pectinase, a group of pectin degrading enzymes, is one of the most influential industrial enzymes, helpful in producing a wide variety of products with good qualities. These enzymes are biocatalysts and are highly specific, non-toxic, sustainable, and eco-friendly. Consequently, both pectin and pectinase are crucially essential biomolecules with extensive applicatory perception in the biotechnological sector. The market demand and application of pectinases in new sectors are continuously increasing. However, due to the high cost of the substrate used for the growth of microbes, the production of pectinase using microorganisms is limited. Therefore, low-cost or no-cost substrates, such as various agricultural biomasses, are emphasized in producing pectinases. The importance and implications of pectinases are rising in diverse areas, including bioethanol production, extraction of DNA, and protoplast isolation from a plant. Therefore, this review briefly describes the structure of pectin, types and source of pectinases, substrates and strategies used for pectinases production, and emphasizes diverse potential applications of pectinases. The review also has included a list of pectinases producing microbes and alternative substrates for commercial production of pectinase applicable in pectinase-based industrial technology.Key points• Pectinase applications are continuously expanding.• Organic wastes can be used as low-cost sources of pectin.• Utilization of wastes helps to reduce pollution.

Production and purification of 2-phenylethanol by Saccharomyces cerevisiae using tobacco waste extract as a substrate

2-phenylethanol (2-PE), which is extracted naturally from plant or biotechnology processing, is widely used in the food and cosmetics industries. Due to the high cost of 2-PE production, the valorization of waste carbon to produce 2-PE has gained increasing attention. Here, 2-PE was produced by Saccharomyces cerevisiae using tobacco waste extract (TWE) as the substrate. Considering the toxicity of nicotine and its inhibition of 2-PE, the tolerance of S. cerevisiae was first evaluated. The results suggested that the production of 2-PE by S. cerevisiae in TWEs could be carried out at 2·0 mg ml-1 nicotine concentrations and may be inhibited by 1·0 mg ml-1 2-PE. Thus, the compounds in the TWEs prepared at different temperatures were detected, and the results revealed that the TWEs prepared at 140°C contained 2·18 mg ml-1 of nicotine, had total sugar concentrations of 26·8 mg ml-1 and were suitable for 2-PE production. Due to feedback regulation, the 2-PE production was only 1·11 mg ml-1 , and the remaining glucose concentration remained at 13·78 mg ml-1 , which indicated insufficient glucose utilization. Then, in situ product recovery was further implemented to remove this inhibition; the glucose utilization (the remaining concentration decreased to 3·64 mg ml-1 ) increased, and the 2-PE production increased to 1·65 mg ml-1 . The 2-PE produced in the fermentation broth was first isolated by elution from the resin with 75% ethanol and then by removing the impurities with 2·5% activated charcoal, and pure 2-PE was identified by gas chromatography mass spectrometry. The results of this study suggest that TWE could be an alternative carbon source for 2-PE production. This could provide an outlet tobacco waste as well as reducing the price of natural 2-PE, although more strategies need to be explored to improve the production yield of 2-PE by using TWE.

Monascus pilosus YX-1125: An efficient digester for directly treating ultra-high-strength liquor wastewater and producing short-chain fatty acids under multiple-stress conditions

Ultra-high-strength liquor wastewater (UHS-LWW) is rich in organic matter, and the required treatment is expensive. Here, an extremophilic strain Monascus pilosus YX-1125 was isolated for the direct conversion of UHS-LWW to short-chain fatty acids (SCFAs). Strain YX-1125 is an efficient SCFA producer with carbohydrate metabolic flexibility under multiple-stress conditions. Moreover, strain YX-1125 could tolerate up to 75 g/L, 100 g/L, and 50 g/L of ethanol, organic acids, and salt, respectively, without inhibition. In repeated-cycle fermentations, 17.8 g/L of butyric acid and 2.0 g/L of propionic acid were produced from UHS-LWW at the fifth cycle, which are the highest concentrations of wastewater-derived SCFAs reported to date. After SCFA recovery, a 98.9% COD reduction was achieved, which is estimated to reduce treatment costs by 91.7%. Results indicate that M. pilosus YX-1125 is a promising strain for the direct treatment of UHS-LWW, and for converting it into valuable biochemicals without any pre-treatment.

Effect of solid loading on the behaviour of pectin-degrading enzymes

BACKGROUND

Pectin plays a role in the recalcitrance of plant biomass by affecting the accessibility of other cell wall components to enzymatic degradation. Elimination of pectin consequently has a positive impact on the saccharification of pectin-rich biomass. This work thus focused on the behaviour of different pectin-degrading enzymes in the presence of low (5%) to high (35%) solid loading of lemon peel.

RESULTS

High solid loading of lemon peel affected pectin solubilisation differently depending on the pectinase used. Pectin lyase was less sensitive to a reduction of water content than was a mixture of endopolygalacturonase and pectin methylesterase, regardless of whether or not the latter's mode of action is processive or not. Marked changes in water mobility were observed along with enzymatic degradation depending on the enzyme used. However, the pectin lyase resulted in less pronounced shifts in water distribution than polygalacturonase-pectin methylesterase mixtures. At similar pectin concentration, pectin solutions hindered the diffusion of hydrolases more than the solid substrate. This can be attributed to the high viscosity of the highly concentrated pectin solutions while the solid substrate may provide continuous diffusion paths through pores.

CONCLUSIONS

The increase in solid substrate loading reduced the efficiency of pectin-degrading enzymes catalysing hydrolysis more significantly than those catalysing β-elimination. LF-NMR experiments highlighted the impact of solid loading on water mobility. Compared to other enzymes and whatever the solid loading, pectin lyase led to longer relaxation times linked with the most destructuration of the solid substrate. This new information could benefit the biorefinery processing of pectin-rich plant material when enzymes are used in the treatment.

Toxicity treatment of tobacco wastes using experimental design by filamentous fungi

Cigarette product waste contains toxic chemicals, including human carcinogens, which leach into and accumulate in the environment and represent a current environmental problem neglected for too long. This study aimed to select filamentous fungi capable of decreasing tobacco extract toxicity as an alternative to a future bioremediation process. The 38 isolates obtained from Culture collection of microorganisms to biotechnological and environmental importance – CCMIBA (Brazil) were cultivated in yeast extract (10 g.L⁻¹) and dextrose (10 g.L⁻¹) containing cigarette tobacco extract (200 mL.L⁻¹) for seven days at 28 °C on a rotary shaker at 150 rpm. The fungal growth rate was determined to infer fungal tolerance to tobacco extract, and supernatants from cultivated fungi were used to run the toxicity test using Allium cepa assay. The Fusarium sp. strain I.17, isolated from cigarette waste, was the only lineage capable of growing in 20% (v/v) of cigarette tobacco extract, allowed the onions to root, and was selected for optimization. Initially, for the experimental design to selected fungus, a fractional factorial experimental design 2⁵⁻¹ was used to examine the effects of yeast extract, cigarette tobacco extract concentration, dextrose, copper sulfate and pH fungal cultivation. The supernatants of these assays were used to run the toxicity test, and yeast extract and copper sulfate were statistically significant in the fungal growth for the decreasing toxicity process and this variable as were select to central composite design. The highest concentration of yeast extract negatively influenced the toxicity decrease, 0.5% of yeast extract in the culture media is the maximum concentration to achieve the best result and to copper sulfate the best result was using 10 μmol.L⁻¹. In conclusion, the experimental design optimized more than seven times the efficiency of tobacco toxicity reducing, resulting in more than 50% of onion root growth, demonstrating the methodology success. And ITS region was used to taxonomy and molecular phylogeny of the isolate Fusarium sp. strain I.17. These results suggest that Fusarium sp. strain I.17 can be used as a potential microorganism to toxicity treatment of cigarette wastes, minimizing the environmental impact of direct burning.

Differential proteomics reveals main determinants for the improved pectinase activity in UV-mutagenized Aspergillus niger strain

OBJECTIVES

To reveal the potential mechanism and key determinants that contributed to the improved pectinase activity in Aspergillus niger mutant EIMU2, which was previously obtained by UV-mutagenesis from the wild-type A. niger EIM-6.

RESULTS

Proteomic analysis for Aspergillus niger EIMU2 by two-dimensional electrophoresis demonstrated that mutant EIMU2 harbored a multiple enzyme system for the degradation of pectin, mainly constituting by main-chain-cleaving enzymes polygalacturonase, pectate lyase, pectinesterase, and some accessory enzymes rhamnogalacturonan lyase and arabinofuranosidase. Further quantitatively differential proteomic analysis revealed that the quantities of four proteins, pectinesterase, rhamnogalacturonan lyase A, DNA-directed RNA polymerase A, and a hypothetical protein in strain EIMU2 were much higher than those in EIM-6. PCR amplification, sequencing and alignment analysis of genes for the two main members of pectin-degrading enzymes, pectate lyase and polygalacturonase showed that their sequences were completely consistent in A. niger EIM-6 and mutant EIMU2.

CONCLUSIONS

The result demonstrated that the improved pectinase activity by UV-mutagenesis in A. niger EIMU2 was probably contributed to the up-regulated expression of rhamnogalacturonan lyase, or pectinesterase, which resulted in the optimization of synergy amongst different components of pectin-degrading enzymes.

Rhodopseudomonas sphaeroides treating mesosulfuron-methyl waste-water

The soybean processing wastewater (SPW) supplementation to facilitate the simultaneously treatment (SPW and mesosulfuron-methyl) of wastewater and production of biological substances by Rhodopseudomonas sphaeroides (R. sphaeroides) was discussed. Compared with the control group, with the addition of SPW, mesosulfuron-methyl was removed, and the yields of single-cell proteins, carotenoids, and bacteriochlorophyll were increased. In the 3 mg/L dose group, the mesosulfuron-methyl removal rate reached 97% after 5 days. Molecular analysis revealed that mesosulfuron-methyl exhibited induction effects on expression of the cpm gene and regulation effects on the synthesis of cytochrome P450 monooxygenases (P450) by activating HKs gene in TCS signal transduction pathway. For R. sphaeroides, this induction process required 1 day. The synthesis of P450 occurred 1 day after inoculation. Prior to expressing cpm gene and synthesizing P450, R. sphaeroides need a period of time to adapt to external mesosulfuron-methyl stimulation. However, the R. sphaeroides growth could not be maintained for more than 1 day due to the lack of organic matter in the raw wastewater. The SPW supplementation provided a sufficient carbon source in four groups with added SPW. After 5 days, R. sphaeroides became the dominant microflora in the wastewater. This new method could complete the treatment of mixed wastewater, the increased of biological substances output and the reuse of wastewater and R. sphaeroides cells as resources at the same time.

RETRACTED: Clothianidin wastewater treatment and the accumulation of high-value biochemical by Rhodopseudomonas spheroides

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/about/our-business/policies/article-withdrawal). This article has been retracted at the request of the Authors and the Editor-in-Chief. The paper is retracted because of a high level of duplication of "Rhodopseudomonas palustris wastewater treatment: cyhalofop-butyl removal, biochemicals production and mathematical model establishment. Bioresource. Tech. 2019, 282: 390-397 As such this article represents a severe abuse of the scientific publishing system. The scientific community takes a very strong view on this matter and apologies are offered to readers of the journal that this was not detected during the submission process. The first author, Pan Wu, takes full responsibility for these actions, a stance supported by Dalian Minzu University and Northeast Agricultural University, Harbin, where the research took place.

Soybean processing wastewater supported the removal of propyzamide and biochemical accumulation from wastewater by Rhodopseudomonas capsulata

Simultaneous (SPW and propyzamide) wastewater treatment and the production of biochemicals by Rhodopseudomonas capsulata (R. capsulata) were investigated with supplement of soybean processing wastewater (SPW). Compared to control group, propyzamide was removed and biochemicals production were enhanced with the supplement of SPW. Propyzamide induced camH gene expression through activating MAPKKKs gene in MAPK signal transduction pathway. The induction of camH gene and CamH occurs after 1 day for R. capsulata. However, lack of organics in original wastewater did not maintain R. capsulata growth for over 1 day. The supplement of SPW provided sufficient carbon source for R. capsulata under three addition dosages. This new method resulted in the mixed (SPW and propyzamide) wastewater treatment and improvement of biochemicals simultaneously, as well as the realization of reutilization of wastewater and R. capsulata as sludge. Meanwhile, high-order nonlinear mathematical model of the relationship between propyzamide removal rate, Xt and Xt/r, was established.

Rhodopseudomonas palustris wastewater treatment: Cyhalofop-butyl removal, biochemicals production and mathematical model establishment

Simultaneous (SPW and cyhalofop-butyl) wastewater treatment and the production of biochemicals by Rhodopseudomonas palustris (R. palustris) was investigated with supplementation of soybean processing wastewater (SPW). Compared to control group, cyhalofop-butyl was removed and single cell protein, carotenoid, bacteriochlorophyll productions were enhanced with the supplementation of SPW. Cyhalofop-butyl removal reached 100% after 5 days under 4000 mg/L COD group. Cyhalofop-butyl induced chbH gene expression to synthesize cyhalofop-butyl-hydrolyzing carboxylesterase through activating MAPKKKs, MAPKKs, MAPKs genes in MAPK signal transduction pathway. The induction process took one day for R. palustris. However, lack of organics in original wastewater did not maintain R. palustris growth for over one day. The supplementation of SPW provided sufficient carbon source. This new method resulted in the mixed wastewater treatment and improvement of biochemicals simultaneously, as well as the realization of reutilization of R. palustris. High-order non-linear mathematical model of the relationship between R_chb, X_c, and X_t was established.

Bacterial cellulose production by Acetobacter xylinum ATCC 23767 using tobacco waste extract as culture medium

In this study, bacterial cellulose (BC) was synthesized by Acetobacter xylinum ATCC 23767 using tobacco waste extract (TWE) as a carbon source. Nicotine was found to be an inhibitory factor for BC synthesis, but it can be removed at pH 9.0 by steam distillation. After removing nicotine, the BC production was 2.27 g/L in TWE prepared with solid-liquid (S-L) ratio at 1:10. To further enhance the BC production, two fermentation stages were performed over 16 days by re-adjusting the pH to 6.5 at 7 days, after the first fermentation stage was completed. Using this two-stage fermentation, the BC production could reach 5.2 g/L. Structural and thermal analysis by FE-SEM, FT-IR, XRD and TGA showed the properties of BC obtained from TWE were similar to that from Hestrin-Schramm (HS) medium. Considering the huge disposal tobacco waste in China, the present study provides an alternative methodology to synthesize BC.

Efficient production of succinic acid from duckweed (Landoltia punctata) hydrolysate by Actinobacillus succinogenes GXAS137

A novel process of enzyme pretreatment and semi-simultaneous saccharification and fermentation (SSSF) was developed in this work to improve succinic acid (SA) productivity from duckweed (Landoltia punctata) and achieve low viscosity. Viscosity (83.86%) was reduced by the pretreatment with combined enzymes at 50 °C for 2 h to a greater extent than that by single enzyme (26.19-71.75%). SSSF was an optimal combination with 65.31 g/L of SA content, which was remarkably higher than those obtained through conventional separate hydrolysis and fermentation (62.12 g/L) and simultaneous saccharification and fermentation (52.41 g/L). The combined approach was effective for SA production. Approximately 75.46 g/L of SA content with a yield of 82.87% and a productivity of 1.35 g/L/h was obtained after 56 h in a 2 L bioreactor. Further studies will focus on increasing the working scale of the proposed method.