Light intensity as major factor to maximize biomass and lipid productivity of Ettlia sp. in CO2-controlled photoautotrophic chemostat

Comparison of Lipid Content in Nine Dinoflagellate Species Using Flow Cytometry

The lipid content of nine dinoflagellates was analyzed using flow cytometry to compare lipid levels. Additionally, the correlation between lipid content, cell size, and carbon content in dinoflagellates was evaluated using BODIPY 505/515 staining. The flow cytometry side scatter (SSC) effectively represented relative cell size, showing a linear relationship with the equivalent spherical diameter (ESD). Larger cells exhibited higher relative lipid content; however, lipid accumulation was influenced by nutritional modes and habitats, with mixorophic and benthic species displaying higher lipid content than heterotrophic species. A comparison of fluorescent dyes revealed that Nile Red overestimated lipid content, suggesting overlap with chlorophyll autofluorescence. Flow cytometry analysis with BODIPY 505/515 demonstrated a linear correlation with the sulfo-phospho-vanillin (SPV) method, enabling determination of actual lipid content using FL1 fluorescence and the slope value. As the carbon content increased, the lipid content initially increased rapidly but plateaued at higher carbon levels, indicating saturation. These findings suggest that relative fluorescence via flow cytometry provides an effective means to estimate the lipid content and carbon content as a function of cell size.

Electrogenic performance and carbon sequestration potential of biophotovoltaics

Biophotovoltaics (BPV) is a clean and sustainable solar energy generation technology that operates by utilizing photosynthetic autotrophic microorganisms to capture light energy and generate electricity. However, a major challenge faced by BPV systems is the relatively low electron transfer efficiency from the photosystem to the extracellular electrode, which limits its electrical output. Additionally, the transfer mechanisms of photosynthetic microorganism metabolites in the entire system are still not fully clear. In response to this, this article briefly introduces the basic BPV principles, reviews its development history, and summarizes measures to optimize its electrogenic efficiency. Furthermore, recent studies have found that constructing photosynthetic-electrogenic microbial consortia can achieve high power density and stability in BPV systems. Therefore, the article discusses the potential application of constructing photosynthetic-electrogenic microbial aggregates in BPV systems. Since photosynthetic-electrogenic microbial communities can also exist in natural ecosystems, their potential contribution to the carbon cycle is worth further attention.

Metabolic responses of Euglena gracilis under photoheterotrophic and heterotrophic conditions

The protist Euglena gracilis has various trophic modes including heterotrophy and photoheterotrophy. To investigate how cultivation mode influences metabolic regulation, the chemical composition of cellular metabolites of Euglena gracilis grown under heterotrophic and photoheterotrophic conditions was monitored from the early exponential phase to the mid-stationary phase using two different techniques, i.e, nuclear magnetic resonance (NMR) spectroscopy and high-resolution mass spectrometry (HRMS). The combined metabolomics approach allowed an in-depth understanding of the mechanism of photoheterotrophic and heterotrophic growth for biomolecule production. Heterotrophic conditions promoted the production of polar amino and oxygenated compounds such as proteins and polyphenol compounds, especially at the end of the exponential phase while photoheterotrophic cells enhanced the production of organoheterocyclic compounds, carbohydrates, and alkaloids.

Immobilized microalgae: principles, processes and its applications in wastewater treatment

Microalgae have emerged as potential candidates for biomass production and pollutant removal. However, expensive biomass harvesting, insufficient biomass productivity, and low energy intensity limit the large-scale production of microalgae. To break through these bottlenecks, a novel technology of immobilized microalgae culture coupled with wastewater treatment has received increasing attention in recent years. In this review, the characteristics of two immobilized microalgae culture technologies are first presented and then their mechanisms are discussed in terms of biofilm formation theories, including thermodynamic theory, Derjaguin-Landau-Verwei-Overbeek theory (DLVO) and its extended theory (xDLVO), as well as ionic cross-linking mechanisms in the process of microalgae encapsulated in alginate. The main factors (algal strains, carriers, and culture conditions) affecting the growth of microalgae are also discussed. It is also summarized that immobilized microalgae show considerable potential for nitrogen and phosphorus removal, heavy metal removal, pesticide and antibiotic removal in wastewater treatment. The role of bacteria in the cultivation of microalgae by immobilization techniques and their application in wastewater treatment are clarified. This is economically feasible and technically superior. The problems and challenges faced by immobilized microalgae are finally presented.

Selecting for a high lipid accumulating microalgae culture by dual growth limitation in a continuous bioreactor

A dual-growth-limited continuous operated bioreactor (chemostat) was used to enhance lipid accumulation in an enrichment culture of microalgae. The light intensity and nitrogen concentration where both limiting factors resulting in high lipid accumulation in the mixed culture. Both conditions of light and nitrogen excess and deficiency were tested. Strategies to selectively enrich for a phototrophic lipid-storing community, based on the use of different nitrogen sources (ammonium vs. nitrate) and vitamin B supplementation in the growth medium, were evaluated. The dual limitation of both nitrogen and light enhanced the accumulation of storage compounds. Ammoniacal nitrogen was the preferred nitrogen source. Vitamin B supplementation led to a doubling of the lipid productivity. The availability of vitamins played a key role in selecting an efficient lipid-storing community, primarily consisting of Trebouxiophyceae (with an 82 % relative abundance among eukaryotic microorganisms). The obtained lipid volumetric productivity (387 mg L-1 d-1) was among the highest reported in literature for microalgae bioreactors. Lipid production by the microalgae enrichment surpassed the efficiencies reported for continuous microalgae pure cultures, highlighting the benefits of mixed-culture photo-biotechnologies for fuels and food ingredients in the circular economy.

Effects of light quality on microalgae cultivation: bibliometric analysis, mini-review, and regulation approaches

The ever-increasing concern for energy shortages and greenhouse effect has triggered the development of sustainable green technologies. Microalgae have received more attention due to the characteristics of biofuel production and CO2 fixation. From the perspective of autotrophic growth, the optimization of light quality has the potential to promote biomass production and bio-component accumulation in microalgae at low cost. In this study, bibliometric analysis was used to describe the basic features, identify the hotspots, and predict future trends of the research related to the light quality on microalgae cultivation. In addition, a mini-review referring to regulation methods of light quality was provided to optimize the framework of research. Results demonstrated that China has the greatest interest in this area. The destination of most research was to obtain biofuels and high-value-added products. Both blue and red lights were identified as the crucial spectrums for microalgae cultivation. However, sunlight is the most affordable light resource, which could not be fully utilized by microalgae through the photosynthetic process. Hence, some regulation approaches (e.g., dyes, plasmonic scattering, and carbon-based quantum dots) are proposed to increase the proportion of beneficial spectrum for enhancement of photosynthetic efficiency. In summary, this review introduces state-of-the-art research and provides theoretical guidance for light quality optimization in microalgae cultivation to obtain more benefits.

Realization process of microalgal biorefinery: The optional approach toward carbon net-zero emission

Increasing carbon dioxide (CO2) emission has already become a dire threat to the human race and Earth's ecology. Microalgae are recommended to be engineered as CO2 fixers in biorefinery, which play crucial roles in responding climate change and accelerating the transition to a sustainable future. This review sorted through each segment of microalgal biorefinery to explore the potential for its practical implementation and commercialization, offering valuable insights into research trends and identifies challenges that needed to be addressed in the development process. Firstly, the known mechanisms of microalgal photosynthetic CO2 fixation and the approaches for strain improvement were summarized. The significance of process regulation for strengthening fixation efficiency and augmenting competitiveness was emphasized, with a specific focus on CO2 and light optimization strategies. Thereafter, the massive potential of microalgal refineries for various bioresource production was discussed in detail, and the integration with contaminant reclamation was mentioned for economic and ecological benefits. Subsequently, economic and environmental impacts of microalgal biorefinery were evaluated via life cycle assessment (LCA) and techno-economic analysis (TEA) to lit up commercial feasibility. Finally, the current obstacles and future perspectives were discussed objectively to offer an impartial reference for future researchers and investors.

Acclimation-driven microalgal cultivation improved temperature and light stress tolerance, CO2 sequestration and metabolite regulation for bioenergy production

This study investigates temperature and light impact on the ability of Micractinium pusillum microalgae to mitigate CO2 and produce bioenergy in semi-continuous mode. Microalgae were exposed to temperatures (15, 25, and 35 °C) and light intensities (50, 350, and 650 μmol m-2 s-1), including two temperature cycles, 25 °C had the maximum growth rate, with no significant difference at 35 °C and light intensities of 350 and 650 μmol m-2 s-1. 15 °C temperature and 50 μmol m-2 s-1 light intensity reduced growth. Increased light intensity accelerated growth, CO2 utilization with carbon and bioenergy accumulation. Microalgae demonstrate rapid primary metabolic adjustment and acclimation reactions in response to changes in light and temperature conditions. Temperature correlated positively with carbon and nitrogen fixation, CO2 fixation, and carbon accumulation in the biomass, whereas there was no correlation found between light. In the temperature regime experiment, higher light intensity boosted nutrient and CO2 utilization, carbon buildup, and biomass bioenergy.

Effect of co-culture with Halomonas mongoliensis on Dunaliella salina growth and phenol degradation

The discharge of industrial phenol wastewater has caused great harm to the environment. This study aims to construct microalgae and bacteria co-culture system to remove phenol from simulated high-salt phenol wastewater and accumulate microalgae biomass. The degradation of phenol by marine microalgae Dunaliella salina (D. salina) and phenol-degrading bacteria Halomonas mongoliensis (H. mongoliensis) was investigated preliminarily, and then the effects of co-culture H. mongoliensis and D. salina on the degradation of phenol and the growth of D. salina were studied. The effects of D. salina/H. mongoliensis inoculation ratio, light intensity, temperature and pH on the performance of the co-culture system were systematically evaluated and optimized. The optimal conditions for phenol degradation were as follows: a D. salina/H. mongoliensis inoculation ratio of 2:1, a light intensity of 120 μmol m-2 s-1, a temperature of 25°C and a pH around 7.5. Under optimal conditions, this co-culture system could completely degrade 400 mg L-1 of phenol within 5 days. Correspondingly, the phenol degradation rate of D. salina monoculture was only 30.3% ± 1.3% within 5 days. Meanwhile, the maximum biomass concentration of D. salina in coculture was 1.7 times compared to the monoculture. This study suggested that this coculture system had great potential for the bioremediation of phenol contaminants and accumulate microalgae biomass.

Roles of illumination on distribution of phosphorus in Chlorella vulgaris under mixotrophic cultivation

Phosphorus (P) is a non-substitutable resource and global reserves of phosphate rock are limited. In this study, phosphorus recovery by Chlorella vulgaris, and the effects of different light intensities (2000 Lux, 5000 Lux, 8000 Lux, 12,000 Lux) on the phosphorus distribution in the soluble microbial product (SMP), extracellular polymeric substance (EPS) and intracellular polymeric substance (IPS) were analyzed. The results showed that the 5000 Lux was the optimum light intensity for P uptake and transformation by Chlorella vulgaris under mixotrophic cultivation. At the light intensity of 5000 Lux, the P uptake rate was 100% after 32 days of cultivation, and the concentration of intracellular organic phosphorus (OP) was 5.77 mg P/L. Moreover, EPS was the main P pool when inorganic phosphorus (IP) was depleted in bulk solution. Phosphorus recovery by microalgae is an important solution to treat P-containing wastewater.

Improving the content of high value compounds in Nordic Desmodesmus microalgal strains

Nordic Desmodesmus microalgal strains (2-6) and (RUC-2) were exposed to abiotic stress (light and salt) to enhance lipids and carotenoids. The biomass output of both strains increased by more than 50% during light stress of 800 μmol m^-2 s^-1 compared to control light. The biomass of Desmodesmus sp. (2-6) contained most lipids (15% of dry weight) and total carotenoids (16.6 mg g^-1) when grown at moderate light stress (400 μmol m^-2 s^-1), which further could be enhanced up to 2.5-fold by salinity stress. Desmodesmus sp. (RUC-2) exhibited maximal lipid (26.5%) and carotenoid (43.8 mg L^-1) content at light intensities of 400 and 100 μmol m^-2 s^-1, respectively. Salinity stress stimulated lipid accumulation by 39%. Nordic Desmodesmus strains therefore are not only able to tolerate stress conditions, but their biomass considerably improves under stress. These strains have high potential to be used in algal bio-factories on low-cost medium like Baltic seawater.

Influence of Harvest Time on the Chemical Profile of Pereskia aculeate Mill. Using Paper Spray Mass Spectrometry

This study evaluated the physicochemical characteristics and the production of bioactive compounds of Pereskia aculeata Mill. at different harvest times. Here, we performed a qualitative evaluation of the chemical profile by paper spray mass spectrometry (PSMS), the phenolic acid and flavonoid profile by high-performance liquid chromatography (HPLC), antioxidant activity, total carotenoids, total phenolic compounds, total flavonoids, total anthocyanins, color characteristics, total soluble solids (TSS), total solids (TS), pH, and total titratable acidity (TTA). The chemical profile was not affected, with the exception of 4,5-dimethyl-2,6-octadiene and azelaic acid, which was only identified in the leaves harvested during the winter. The content of four phenolic acids and three flavonoids were analyzed; out of these, no significant amounts of ellagic acid and quercetin were detected. There was no difference in production of bioactive compounds between seasons, reflecting the antioxidant activity, which also did not differ. Brightness, chroma, and leaf pH were the only physicochemical characteristics that did not vary between seasons.

Production of microalgae with high lipid content and their potential as sources of nutraceuticals

In the current global scenario, the world is under a serious dilemma due to the increasing human population, industrialization, and urbanization. The ever-increasing need for fuels and increasing nutritional problems have made a serious concern on the demand for nutrients and renewable and eco-friendly fuel sources. Currently, the use of fossil fuels is creating ecological and economic problems. Microalgae have been considered as a promising candidate for high-value metabolites and alternative renewable energy sources. Microalgae offer several advantages such as rapid growth rate, efficient land utilization, carbon dioxide sequestration, ability to cultivate in wastewater, and most importantly, they do not participate in the food crop versus energy crop dilemma or debate. An efficient microalgal biorefinery system for the production of lipids and subsequent byproduct for nutraceutical applications could well satisfy the need. But, the current microalgal cultivation systems for the production of lipids and nutraceuticals do not offer techno-economic feasibility together with energy and environmental sustainability. This review article has its main focus on the production of lipids and nutraceuticals from microalgae, covering the current strategies used for lipid production and the major high-value metabolites from microalgae and their nutraceutical importance. This review also provides insights on the future strategies for enhanced microalgal lipid production and subsequent utilization of microalgal biomass.

GRAPHICAL ABSTRACT

Development of a novel nannochloropsis strain with enhanced violaxanthin yield for large-scale production

BACKGROUND

Nannochloropsis is a marine microalga that has been extensively studied. The major carotenoid produced by this group of microalgae is violaxanthin, which exhibits anti-inflammatory, anti-photoaging, and antiproliferative activities. Therefore, it has a wide range of potential applications. However, large-scale production of this pigment has not been much studied, thereby limiting its industrial application.

RESULTS

To develop a novel strain producing high amount of violaxanthin, various Nannochloropsis species were isolated from seawater samples and their violaxanthin production potential were compared. Of the strains tested, N. oceanica WS-1 exhibited the highest violaxanthin productivity; to further enhance the violaxanthin yield of WS-1, we performed gamma-ray-mediated random mutagenesis followed by colorimetric screening. As a result, Mutant M1 was selected because of its significant higher violaxanthin content and biomass productivity than WS-1 (5.21 ± 0.33 mg g^- 1 and 0.2101 g L^- 1 d^- 1, respectively). Subsequently, we employed a 10 L-scale bioreactor to confirm the large-scale production potential of M1, and the results indicated a 43.54 % increase in violaxanthin production compared with WS-1. In addition, comparative transcriptomic analysis performed under normal light condition identified possible mechanisms associated with remediating photo-inhibitory damage and other key responses in M1, which seemed to at least partially explain enhanced violaxanthin content and delayed growth.

CONCLUSIONS

Nannochloropsis oceanica mutant (M1) with enhanced violaxanthin content was developed and its physiological characteristics were investigated. In addition, enhanced production of violaxanthin was demonstrated in the large-scale cultivation. Key transcriptomic responses that are seemingly associated with different physiological responses of M1 were elucidated under normal light condition, the details of which would guide ongoing efforts to further maximize the industrial potential of violaxanthin producing strains.

Stepwise treatment of undiluted raw piggery wastewater, using three microalgal species adapted to high ammonia

A high ammonia concentration and chemical oxygen demand (COD) in piggery wastewater force it to be diluted before conventional microalgal treatment to reduce ammonia toxicity. Incomplete treatment of ammonia and COD in piggery wastewater may cause eutrophication, resulting in algal blooms. This study tried to treat raw piggery wastewater without dilution, using three strains of microalgae (Chlorella sorokiniana, Coelastrella sp. and Acutodesmus nygaardii) that outcompeted other algae under heterotrophic, mixotrophic, and autotrophic conditions, respectively, through adaptive evolution at high ammonia concentration. The three stepwise processes were designed to remove (1) small particles, COD, and phosphorus in the 1st heterotrophic C. sorokiniana cultivation, (2) ammonia and COD in the 2nd mixotrophic Coelastrella sp. cultivation, and (3) the remaining ammonia in the 3rd photoautotrophic A. nygaardii cultivation. To enhance ammonia uptake rate, each algal species were inoculated after 2-day nitrogen starvation. When the N-starved three species were inoculated at each step sequentially at 7 g/L for 2 days, the final phosphorus, COD, and ammonia removal efficiencies were 100% (16.4-0 mg/L), 92% (6820-545 mg/L), 90% (850-81 mg/L) and turbidity (99%) after total 6 days.

Stabilizing lactate production through repeated batch fermentation of food waste and waste activated sludge

Bio-valorization of organic waste streams, such as food waste and waste activated sludge, to lactic acid (LA) has recently drawn much attention. It offers an opportunity for resource recovery, alleviates environmental issues and potentially turns a profit. In this study, both stable and high LA yield (0.72 ± 0.15 g/g total chemical oxygen demand) and productivity rate (0.53 g/L•h) were obtained through repeated batch fermentation. Moreover, stable solubilization and increase in the critical hydrolase activities were achieved. Depletions of ammonia and phosphorus were correlated with the LA production. The relative abundance of the key LA bacteria genera (i.e., Alkaliphilus, Dysgonomonas, Enterococcus and Bifidobacterium) stabilized in the repeated batch reactor at a higher level (44.5 ± 2.53%) in comparison with the batch reactor (26.2 ± 4.74%). This work show a practical way for the sustainable valorization of organic wastes to LA by applying the repeated batch mode during biological treatment.

Effects of light intensity on growth and lipid production in microalgae grown in wastewater

BACKGROUND

Cultivation of microalgae in wastewater could significantly contribute to wastewater treatment, biodiesel production, and thus the transition to renewable energy. However, more information on effects of environmental factors, including light intensity, on their growth and composition (particularly fatty acid contents) is required. Therefore, we investigated the biomass and fatty acid production of four microalgal species, isolated in the Northern hemisphere and grown at three light intensities (50, 150 and 300 μE m^-2 s^-1).

RESULTS

Increases in light intensities resulted in higher biomass of all four species and, importantly, raised fatty acid contents of both Desmodesmus sp. and Scenedesmus obliquus. Fourier-transform IR spectrometry analysis showed that the increases in fatty acid content were associated with reductions in protein, but not carbohydrate, contents. Assessment of fatty acid composition revealed that increasing light intensity led to higher and lower contents of oleic (18:1) and linolenic (18:3) acids, respectively. The microalgae consumed more than 75% of the nitrogen and phosphorus present in the wastewater used as growth medium.

CONCLUSION

The results show the importance of optimizing light intensities to improve fatty acid production by microalgae and their quality as sources of biodiesel. In addition, increase in fatty acid content is associated with decrease in protein content.

Biomass and lipid induction strategies in microalgae for biofuel production and other applications

The use of fossil fuels has been strongly related to critical problems currently affecting society, such as: global warming, global greenhouse effects and pollution. These problems have affected the homeostasis of living organisms worldwide at an alarming rate. Due to this, it is imperative to look for alternatives to the use of fossil fuels and one of the relevant substitutes are biofuels. There are different types of biofuels (categories and generations) that have been previously explored, but recently, the use of microalgae has been strongly considered for the production of biofuels since they present a series of advantages over other biofuel production sources: (a) they don’t need arable land to grow and therefore do not compete with food crops (like biofuels produced from corn, sugar cane and other plants) and; (b) they exhibit rapid biomass production containing high oil contents, at least 15 to 20 times higher than land based oleaginous crops. Hence, these unicellular photosynthetic microorganisms have received great attention from researches to use them in the large-scale production of biofuels. However, one disadvantage of using microalgae is the high economic cost due to the low-yields of lipid content in the microalgae biomass. Thus, development of different methods to enhance microalgae biomass, as well as lipid content in the microalgae cells, would lead to the development of a sustainable low-cost process to produce biofuels. Within the last 10 years, many studies have reported different methods and strategies to induce lipid production to obtain higher lipid accumulation in the biomass of microalgae cells; however, there is not a comprehensive review in the literature that highlights, compares and discusses these strategies. Here, we review these strategies which include modulating light intensity in cultures, controlling and varying CO₂ levels and temperature, inducing nutrient starvation in the culture, the implementation of stress by incorporating heavy metal or inducing a high salinity condition, and the use of metabolic and genetic engineering techniques coupled with nanotechnology.

Maximizing biomass and lipid production in Ettlia sp. by ultraviolet stress in a continuous culture

Lipid production in microalgae can be induced by various stress factors. However, stress induced lipid accumulation requires considerable time leading to the decrease in lipid productivity. Here, we attempted to increase the lipid productivity while maintaining the high growth of Ettlia sp. by optimizing nitrogen concentration and UV exposure in a continuous culture. The biomass and lipid productivities of Ettlia sp. cultured with 150 mg N L^-1 and UV-A added PAR were 1.67 ± 0.08 g L^-1 d^-1 and 0.55 ± 0.05 g L^-1 d^-1, respectively. Lipid productivity and lipid content were around 43.7% and 33.7% higher, respectively in UV-A treatment compared to the control. Moreover, gene-expression patterns related to antioxidant defense and intracellular ROS levels indicated that UV-A affected certain ROS and antioxidants pathways and successfully induced the lipid accumulation in Ettlia sp. This strategy to activate lipid accumulation can be applied in other microalgae without affecting their growth.

Nitrogen modulation under chemostat cultivation mode induces biomass and lipid production by Chlorella vulgaris and reduces antenna pigment accumulation

Algal growth limitation in large-scale cultivation mostly results from high level synthesis of photosynthetic pigments, owing to self-shading effects and attenuation of light distribution. To overcome this problem, here we investigated the influence of nitrogen modulation on changes in antenna pigments as well as biomass and lipid production by Chlorella vulgaris under a chemostat continuous cultivation mode. The production of algal antenna pigments, including chlorophylls and carotenoids, was promoted in a total nitrogen (TN) concentration-dependent manner. Maximum algal biomass and lipid production were obtained from 70 mg/L of TN concentration along with a significant increase in light transmittance and reduction in antenna pigments. Furthermore, the composition of polyunsaturated fatty acids remarkably augmented at low TN concentrations. These results suggest that the reduction in algal antenna pigment synthesis via modulation of nitrogen concentration may serve as an effective strategy to enhance algal biomass and lipid production.

Bacterial community enhances flocculation efficiency of Ettlia sp. by altering extracellular polymeric substances profile

This study examined the effects of a bacterial community and extracellular polymeric substances (EPS) on Ettlia sp. flocculation. The growth rate, flocculation efficiency (FE), bacterial community, and EPS profile of axenic and xenic Ettlia cultures were monitored during 46 days of cultivation. For the xenic culture, with a great abundance of growth-promoting and flocculation-inducing bacteria, the biomass density was 18.75% higher and its FE reached 100% in the mid-stationary phase. Moreover, microscopic observation and a quantitative analysis of the EPS revealed the exclusive presence of long filamentous EPS and more compact structure in the xenic Ettlia culture, possibly explaining its better FE. Notwithstanding, for the axenic culture, despite a lower biomass density and reduced abundance of EPS, its FE reached 92.54% in the mid-stationary phase. Thus, the role of the bacterial community was found to be supportive rather than vital for the high settleability of the self-flocculating Ettlia microalgal culture.

Increased biomass and lipid production of Ettlia sp. YC001 by optimized C and N sources in heterotrophic culture

The culture conditions and media composition for the heterotrophic culture of an axenic strain of Ettlia sp. YC001 were firstly optimized using the Plackett-Burman design (PBD) and response surface methodology (RSM). The strain successfully showed higher productivity in the basal media without any light illumination at 32.2 to 33.3 °C. The PBD results showed that the most effective components for biomass productivity of Ettlia sp. were fructose and yeast extract for sources of C and N, respectively. The RSM results showed an optimal level of 72.2 g/L for fructose and 21.5 g/L for yeast extract, resulting in 46.1 g/L biomass with a lipid content of 13.8% over a course of 9 days. Using a 5 L scaled-up fermentation system for 6 days, the production of biomass and lipids was 7.21 g/L/day and 1.18 g/L/day, respectively. Consequently, heterotrophic cultivation of Ettlia sp. YC001 provided much higher production of biomass and lipids than those of autotrophic cultivation. As further research, the use of substitute substrates instead of fructose and yeast extract should be developed to reduce production costs.

Enhancing lutein production with mixotrophic cultivation of Chlorella sorokiniana MB-1-M12 using different bioprocess operation strategies

A lutein-enriched mutant, Chlorella sorokiniana MB-1-M12 was grown mixotrophically for lutein production. The lutein production efficiency of the strain was enhanced via optimizing the operating strategies. The results show that using semi-continuous cultivation with a medium replacement ratio of 75% resulted in a higher lutein productivity and lutein concentration of 6.24 mg/L/d and 50.6 mg/L, respectively, which were markedly higher than those obtained from batch and fed-batch cultivation. Cultivation under simulated outdoor cultivation conditions (i.e., temperature of 35 °C/25 °C for a 12 h/12 h light/dark cycle) could achieve the highest lutein productivity and lutein concentration of 3.34 mg/L/d and 30.8 mg/L, respectively. Lutein production via outdoor cultivation of MB-1-M12 strain with a 60-L tubular photobioreactor was performed using semi-continuous operation. With a medium replacement ratio of 75%, a good lutein productivity (4.46 mg/L/d) and concentration (27.4 mg/L) was obtained, indicating the feasibility of producing lutein under outdoor cultivation of the microalgal strain.

Application of growth-phase based light-feeding strategies to simultaneously enhance Chlorella vulgaris growth and lipid accumulation

Considering the variations of optimal light intensity required by microalgae cells along with growth phases, growth-phase light-feeding strategies were proposed and verified in this paper, aiming at boosting microalgae lipid productivity from the perspective of light conditions optimization. Experimental results demonstrate that under an identical time-averaged light intensity, the light-feeding strategies characterized by stepwise incremental light intensities showed a positive effect on biomass and lipid accumulation. The lipid productivity (235.49 mg L^-1 d^-1) attained under light-feeding strategy V (time-averaged light intensity: 225 μmol m^-2 s^-1) was 52.38% higher over that obtained under a constant light intensity of 225 μmol m^-2 s^-1. Subsequently, based on light-feeding strategy V, microalgae lipid productivity was further elevated to 312.92 mg L^-1 d^-1 employing a two-stage based light-feeding strategy V₅₆₀ (time-averaged light intensity: 360 μmol m^-2 s^-1), which was 79.63% higher relative to that achieved under a constant light intensity of 360 μmol m^-2 s^-1.