Enhancement of microalgal growth and biocomponent-based transformations for improved biofuel recovery: A review

Biomass and hydrocarbon production from Botryococcus braunii: A review focusing on cultivation methods

Botryococcus braunii has garnered significant attention in recent years due to its ability to produce high amounts of renewable hydrocarbons through photosynthesis. As the world shifts towards a greener future and seeks alternative sources of energy, the cultivation of B. braunii and the extraction of its hydrocarbons can potentially provide a viable solution. However, the development of a sustainable and cost-effective process for cultivating B. braunii is not without challenges. Compared to other microalgae, B. braunii grows very slowly, making it time-consuming and expensive to produce biomass. In response to these challenges, several efforts have been put into optimizing Botryococcus braunii cultivation systems to increase biomass growth and hydrocarbon production efficiency. This review presents a comparative analysis of different Botryococcus braunii cultivation systems, and the factors affecting the productivity of biomass and hydrocarbon in Botryococcus braunii are critically discussed. Attached microalgal growth offers several advantages that hold significant potential for enhancing the economic viability of microalgal fuels. Here, we propose that employing attached growth cultivation, coupled with the milking technique for hydrocarbon extraction, represents an efficient approach for generating renewable fuels from B. braunii. Nevertheless, further research is needed to ascertain the viability of large-scale implementation.

Salicylic acid enhances cell growth, fatty acid and astaxanthin production in heterotrophic Chromochloris zofingiensis without reactive oxygen species elevation

BACKGROUND

The induction of lipid and astaxanthin accumulation in microalgae is often achieved through abiotic stress. However, this approach usually leads to oxidative stress, which results in relatively low growth rate. Phytohormones, as important small molecule signaling substances, not only affect the growth and metabolism of microalgae but also influence the intracellular reactive oxygen species level. This study aimed to screen phytohormones that could promote the fatty acids and astaxanthin yield of heterotrophic Chromochloris zofingiensis without causing oxidative damage, and further investigate the underlying mechanisms.

RESULTS

In the present study, among all the selected phytohormones, the addition of exogenous salicylic acid (SA) could effectively promote cell growth along with the yield of total fatty acids (TFA) and astaxanthin in heterotrophic C. zofingiensis. Notably, the highest yields of TFA and astaxanthin were achieved at 100 μM SA, 43% and 97.2% higher compared with the control, respectively. Interestingly, the intracellular reactive oxygen species (ROS) levels, which are usually increased with elevated TFA content under abiotic stresses, were significantly decreased by SA treatment. Comparative transcriptome analysis unveiled significant alterations in overall carbon metabolism by SA. Specifically, the upregulation of fatty acid synthesis pathway, upregulation of β-carotene-4-ketolase (BKT) in carotenoid synthesis aligned with biochemical findings. Weighted gene co-expression network analysis highlighted ABC transporters and GTF2B-like transcription factor as potential key regulators.

CONCLUSION

This study found that salicylic acid can serve as an effective regulator to promote the celling growth and accumulation of fatty acids and astaxanthin in heterotrophic C. zofingiensis without ROS elevation, which provides a promising approach for heterotrophic production of TFA and astaxanthin without growth inhibition.

Advancements of microalgal upstream technologies: Bioengineering and application aspects in the paradigm of circular bioeconomy

Sustainable energy transition has brought the attention towards microalgae utilization as potential feedstock due to its tremendous capabilities over its predecessors for generating more energy with reduced carbon footprint. However, the commercialization of microalgae feedstock remains debatable due to the various factors and considerations taken into scaling-up the conventional microalgal upstream processes. This review provides a state-of-the-art assessment over the recent developments of available and existing microalgal upstream cultivation systems catered for maximum biomass production. The key growth parameters and main cultivation modes necessary for optimized microalgal growth conditions along with the fundamental aspects were also reviewed and evaluated comprehensively. In addition, the advancements and strategies towards potential scale-up of the microalgal cultivation technologies were highlighted to provide insights for further development into the upstream processes aimed at sustainable circular bioeconomy.

The potential of microalgal sources as coating materials: A case study for the development of biocompatible surgical sutures

Sutures are considered as surgical materials that form excellent surfaces to integrate the postoperative parts of the body. These materials present suitable platforms for potential bacterial penetrations. Therefore, coating these biomedical materials with biocompatible compounds is seen as a potential approach to improve their properties while avoiding adverse effects. The aim of this study was to evaluate Arthrospira platensis, Haematacoccus pluvialis, Chlorella minutissima, Botyrococcus braunii, and Nostoc muscorum as potential surgical suture coating materials. Their crude extracts were absorbed into two different sutures as poly glycolic (90%)-co-lactic acid (10%) (PGLA) and poly dioxanone (PDO); then, their cytotoxic effects and antibacterial activities were examined. Both N. muscorum-coated sutures (PGLA and PDO) and A. platensis-coated (PGLA and PDO) sutures did not induce any toxic effect on L929 mouse fibroblast cells (>70% cell viability). The highest antibacterial activity against Staphylococcus aureus was achieved with N. muscorum-coated PGLA and A. platensis-coated PGLA at 11.18 ± 0.54 mm and 9.52 ± 1.15 mm, respectively. These sutures were examined by mechanical analysis, and found suitable according to ISO 10993-5. In comparison with the commercial antibacterial agent (chlorohexidine), the results proved that N. muscorum extract can be considered as the most promising suture coating material for the human applications.

Protist–Lactic Acid Bacteria Co-Culture as a Strategy to Bioaccumulate Polyunsaturated Fatty Acids in the Protist Aurantiochytrium sp. T66

Thraustochytrids are aquatic unicellular protists organisms that represent an important reservoir of a wide range of bioactive compounds, such as essential polyunsaturated fatty acids (PUFAs) such as arachidonic acid (ARA), docosahexaenoic acid (DHA), eicosapentaenoic acid (EPA), which are involved in the regulation of the immune system. In this study, we explore the use of co-cultures of Aurantiochytrium sp. and bacteria as a biotechnological tool capable of stimulating PUFA bioaccumulation. In particular, the co-culture of lactic acid bacteria and the protist Aurantiochytrium sp. T66 induce PUFA bioaccumulation, and the lipid profile was evaluated in cultures at different inoculation times, with two different strains of lactic acid bacteria capable of producing the tryptophan dependent auxins, and one strain of Azospirillum sp., as a reference for auxin production. Our results showed that the Lentilactobacillus kefiri K6.10 strain inoculated at 72 h gives the best PUFA content (30.89 mg g−1 biomass) measured at 144 h of culture, three times higher than the control (8.87 mg g−1 biomass). Co-culture can lead to the generation of complex biomasses with higher added value for developing aquafeed supplements.

The growth, lipid accumulation and adaptation mechanism in response to variation of temperature and nitrogen supply in psychrotrophic filamentous microalga Xanthonema hormidioides (Xanthophyceae)

BACKGROUND

Microalgae are promising feedstocks for production of renewable biofuels and value-added bioproducts. Temperature and nitrogen supply are important environmental and nutritional factors affecting the growth and metabolism of microalgae, respectively. In this study, the growth and lipid accumulation of filamentous microalgae Xanthonema hormidioides under different temperatures (5, 7, 10, 15, 20, 25, 27 and 30 °C) and initial nitrogen concentrations (3, 9, 18 mM) were investigated, and its adaptive mechanisms of tolerance to low temperature and nitrogen stress were analysis by proteomics.

RESULTS

The optimum temperature range for the growth of X. hormidioides was between 15 and 20 °C, and the algal cells had slow growth rate at 5 °C and could not survive at 30 °C. The maximum biomass concentration was 11.73 g L-1 under the temperature of 20 °C, and the highest total lipid content was 56.63% of dry weight. Low temperature did not change the fatty acids profiles but promoted the accumulation of unsaturated fatty acids of X. hormidioides. The maximum contents of palmitoleic acid, eicosapentaenoic acid and total fatty acid were 23.64%, 2.49% and 41.14% of dry weight, respectively. Proteomics was performed under three temperature (7, 15, 25 °C), two nitrogen concentrations (3 and 18 mM) and two cultivation times (day 3 and 12). A total of 6503 proteins were identified. In the low temperature, photosynthesis-related proteins were down-regulated to protect the photosynthetic apparatus. The up-regulation of key enzymes DGAT and PDAT demonstrated the accumulation of TAGs under low nitrogen treatment. The proteins related to ribosome, phosphatidylinositol signaling system, antioxidant system and cold shock proteins (CSPs) in X. hormidioides were co-upregulated under the treatment of low temperature, which can alleviate the damages induced by temperature stress and maintain the normal growth and metabolism of algal cells.

CONCLUSIONS

X. hormidioides is a psychrotolerant microalga. It is an oleaginous filamentous microalga containing hyper palmitoleic acid and a certain amount of eicosapentaenoic acid with great potential for biofuel development, as well as for applications in nutritional health products and other industries.

Features of Temperature Adaptation of Phaeodactylum tricornutum, Nitzschia sp., and Skeletonema costatum (Bacillariophyceae) under Different Light Conditions

Two types of possible adaptive response of the photosynthetic apparatus of diatoms to the changes in growth temperature conditions are shown. The first type is a temperature-dependent change in the content of chlorophyll in the cell, aimed at matching the rates of light and dark reactions of photosynthesis (noted in Phaeodactylum tricornutum and Nitzschia sp. 3). At the limiting light intensity, a temperature decrease from 20 to 5°C leads to an increase in the initial slope of light dependence of the C/Chl ratio; under the optimal light conditions at a temperature decrease from 20 to 10°C and from 10 to 5°C, the C/Chl ratio increases 1.5-fold in both species. The second type of response to the changes in growth temperature conditions was observed in Skeletonema costatum, for which the chlorophyll content in the cell does not depend on the temperature in the range of 10-20°C. The adaptation of the photosynthetic apparatus in this case probably occurs due to the changes in the activity of enzyme systems and in the rate of enzyme processes. The potential productivity of all studied species of algae at 10°C, calculated as the increase in biomass per unit of chlorophyll per day, does not differ significantly. Under the conditions of light inhibition, a temperature decrease leads to a progressive decrease in the content of chlorophyll in the cells of all algal species under study due to a decrease in the rate of pigment synthesis against the background of its intense photooxidation.

Residual palm kernel expeller as the support material and alimentation provider in enhancing attached microalgal growth for quality biodiesel production

Albeit the biodiesel production from suspended microalgal system has gained immense interests in recent years, the domineering limitation of being economically infeasible has hindered this technology from partaking into a large-scale operation. To curtail this issue, attached growth system had been introduced by various studies; however, those were still unable to alleviate the socio-economic challenges faced in commercializing the microalgal biomass production. Thus, this study had developed a novel approach in cultivating-cum-harvesting attached Chlorella vulgaris sp. microalgae, whilst using solid organic waste of palm kernel expeller (PKE) as the supporting and alimentation material for microalgal biofilm formation. The effects of three variables, namely, PKE dosage, light intensity, and photoperiod, were initially modelled and later optimized using Response Surface Methodology tool. The derived statistical models could predict the growth performances of attached microalgal biomass and lipid productivity. The optimum growing condition was attained at PKE dosage of 5.67 g/L, light intensity of 197 μmol/m2 s and photoperiod of 8 light and 16 dark hours/cycle, achieving the microalgal density and lipid content of 9.87 ± 0.05 g/g and 3.39 ± 0.28 g/g, respectively, with lipid productivity of 29.6 mg/L day. This optimum condition had led to the intensification of biodiesel quality with a high percentage of monounsaturated fatty acid, i.e., oleic acid (C18:1), encompassing 81.86% of total fatty acid methyl ester components. Given that the positive acquisition of PKE as an excellent supporting material in enhancing the microalgal density and lipid productivity that had resulted in the commercially viable biodiesel quality, this study served as a novel revolution in augmenting the microalgae and solid waste utilities for sustainable energy generation.

Pyrolysis of waste oils for the production of biofuels: A critical review

The application of waste oils as pyrolysis feedstocks to produce high-grade biofuels is receiving extensive attention, which will diversify energy supplies and address environmental challenges caused by waste oils treatment and fossil fuel combustion. Waste oils are the optimal raw materials to produce biofuels due to their high hydrogen and volatile matter content. However, traditional disposal methods such as gasification, transesterification, hydrotreating, solvent extraction, and membrane technology are difficult to achieve satisfactory effects owing to shortcomings like enormous energy demand, long process time, high operational cost, and hazardous material pollution. The usage of clean and safe pyrolysis technology can break through the current predicament. The bio-oil produced by the conventional pyrolysis of waste oils has a high yield and HHV with great potential to replace fossil fuel, but contains a high acid value of about 120 mg KOH/g. Nevertheless, the application of CaO and NaOH can significantly decrease the acid value of bio-oil to close to zero. Additionally, the addition of coexisting bifunctional catalyst, SBA-15@MgO@Zn in particular, can simultaneously reduce the acid value and positively influence the yield and quality of bio-oil. Moreover, co-pyrolysis with plastic waste can effectively save energy and time, and improve bio-oil yield and quality. Consequently, this paper presents a critical and comprehensive review of the production of biofuels using conventional and advanced pyrolysis of waste oils.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

The Active Phytohormone in Microalgae: The Characteristics, Efficient Detection, and Their Adversity Resistance Applications

Phytohormones are a class of small organic molecules that are widely used in higher plants and microalgae as chemical messengers. Phytohormones play a regulatory role in the physiological metabolism of cells, including promoting cell division, increasing stress tolerance, and improving photosynthetic efficiency, and thereby increasing biomass, oil, chlorophyll, and protein content. However, traditional abiotic stress methods for inducing the accumulation of energy storage substances in microalgae, such as high light intensity, high salinity, and heavy metals, will affect the growth of microalgae and will ultimately limit the efficient accumulation of energy storage substances. Therefore, the addition of phytohormones not only helps to reduce production costs but also improves the efficiency of biofuel utilization. However, accurate and sensitive phytohormones determination and analytical methods are the basis for plant hormone research. In this study, the characteristics of phytohormones in microalgae and research progress for regulating the accumulation of energy storage substances in microalgae by exogenous phytohormones, combined with abiotic stress conditions at home and abroad, are summarized. The possible metabolic mechanism of phytohormones in microalgae is discussed, and possible future research directions are put forward, which provide a theoretical basis for the application of phytohormones in microalgae.

Emerging technologies for sustainable production of biohydrogen production from microalgae: A state-of-the-art review of upstream and downstream processes

Biohydrogen (BioH₂) is considered as one of the most environmentally friendly fuels and a strong candidate to meet the future demand for a sustainable source of energy. Presently, the production of BioH₂ from photosynthetic organisms has raised a lot of hopes in the fuel industry. Moreover, microalgal-based BioH₂ synthesis not only helps to combat current global warming by capturing greenhouse gases but also plays a key role in wastewater treatment. Hence, this manuscript provides a state-of-the-art review of the upstream and downstream BioH₂ production processes. Different metabolic routes such as direct and indirect photolysis, dark fermentation, photofermentation, and microbial electrolysis are covered in detail. Upstream processes (e.g. growth techniques, growth media) also have a great impact on BioH₂ productivity and economics, which is also explored. Technical and scientific obstacles of microalgae BioH₂ systems are finally addressed, allowing the technology to become more innovative and commercial.

Potential applications of algae in biochemical and bioenergy sector

Algae have gained substantial importance as the most promising potential green fuel source across the globe and is on growing demand due to their antioxidant, anticancer, antiviral, antihypertensive, cholesterol reducing and thickening properties. Therefore, it has vast range of application in medicines, pharmaceutical, cosmetics, paper and nutraceutical industries. In this work, the remarkable ability of algae to convert CO₂ and other toxic compounds in atmosphere to potential biofuels, foods, feeds and high-value bioactive compounds is reviewed. Algae produce approximately 50% of the earth's oxygen using its photosynthetic activity, thus acting as a potent tool to mitigate the effects of air pollution. Further, the applicability of algae as a desirable energy source has also been discussed, as they have the potential to serve as an effective alternative to intermittent renewable energy; and also, to combustion-based fossil fuel energy, making them effective for advanced biofuel conversions. This work also evaluates the current applications of algae and the implications of it as a potential substrate for bioplastic, natural alternative to inks and for making paper besides high-value products. In addition, the scope for integrated biorefinery approach is also briefly explored in terms of economic aspects at the industrial scale, as such energy conversion mechanisms are directly linked with sustainability, thus providing a positive overall energy outlook.

Biomass, lipid accumulation kinetics, and the transcriptome of heterotrophic oleaginous microalga Tetradesmus bernardii under different carbon and nitrogen sources

BACKGROUND

Heterotrophic cultivation of microalgae has been proposed as a viable alternative method for novel high-value biomolecules, enriched biomass, and biofuel production because of their allowance of high cell density levels, as well as simple production technology. Tetradesmus bernardii, a newly isolated high-yielding oleaginous microalga under photoautotrophic conditions, is able to grow heterotrophically, meaning that it can consume organic carbon sources in dark condition. We investigated the effect of different carbon/nitrogen (C/N) ratios on the growth and lipid accumulation of T. bernardii in heterotrophic batch culture under two nitrogen sources (NaNO₃ and CO(NH₂)₂). In addition, we conducted time-resolved transcriptome analysis to reveal the metabolic mechanism of T. bernardii in heterotrophic culture.

RESULTS

T. bernardii can accumulate high biomass concentrations in heterotrophic batch culture where the highest biomass of 46.09 g/L was achieved at 100 g/L glucose concentration. The rate of glucose to biomass exceeded 55% when the glucose concentration was less than 80 g/L, and the C/N ratio was 44 at urea treatment. The culture was beneficial to lipid accumulation at a C/N ratio between 110 and 130. NaNO₃ used as a nitrogen source enhanced the lipid content more than urea, and the highest lipid content was 45% of dry weight. We performed RNA-seq to analyze the time-resolved transcriptome of T. bernardii. As the nitrogen was consumed in the medium, nitrogen metabolism-related genes were significantly up-regulated to speed up the N metabolic cycle. As chloroplasts were destroyed in the dark, the metabolism of cells was transferred from chloroplasts to cytoplasm. However, storage of carbohydrate in chloroplast remained active, mainly the synthesis of starch, and the precursor of starch synthesis in heterotrophic culture may largely come from the absorption of organic carbon source (glucose). With regard to lipid metabolism, the related genes of fatty acid synthesis in low nitrogen concentration increased gradually with the extension of cultivation time.

CONCLUSION

T. bernardii exhibited rapid growth and high lipid accumulation in heterotrophic culture. It may be a potential candidate for biomass and biofuel production. Transcriptome analysis showed that multilevel regulation ensured the conversion from carbon to the synthesis of carbohydrate and lipid.

Metabolic pathways for microalgal biohydrogen production: Current progress and future prospectives

Microalgal biohydrogen (bioH₂) has attracted global interest owing to its potential carbon-free source of sustainable renewable energy. Most of previous reviews which focused on microalgal bioH₂, have shown unclear differentiation among the metabolic pathways. In this review, investigation of all different metabolic pathways for microalgal bioH₂ production along with discussion on the recent research work of last 5-years have been considered. The major factors (such as light, vital nutrients, microalgal cell density, and substrate bioavailability) are highlighted. Moreover, effect of various pretreatment approaches on the constituent's bioaccessibility is reported. Microbial electrolysis cells as a new strategy for bioH₂ production is stated. Comparison between the operation conditions of various bioreactors and economic feasibility is also emphasized. Genetic, metabolic engineering, and synthetic biology as recent technologies improved the microalgal bioH₂ production through inactivation of uptake hydrogenase (H₂ase), inhibition of the competing pathways in polysaccharide synthesis, and improving the O₂ tolerant H₂ase.

Removal of pollutants from biogas slurry and CO2 capture in biogas by microalgae-based technology: a systematic review

Recent research interest has focused on microalgae cultivation for biogas slurry purification and biogas upgrading due to the requirement of high efficiency for nutrient uptake and CO₂ capture, with economic feasibility and environmental benefits. Numerous studies have suggested that biogas slurry purification and biogas upgrading can occur simultaneously via microalgae-based technology. However, there is no comprehensive review on this technology with respect to the nutrient removal from biogas slurry and biogas upgrading. This article summarizes microalgal cultivation with biogas slurry and biogas from anaerobic digestion. The parameters, techniques, and modes of microalgae cultivation have been discussed in detail to achieve high efficiency in biogas slurry purification and biogas upgrading. In addition, the evaluation of energy efficiency and safety has also been explored. Compared with mono-cultivation of microalgae and co-cultivation of microalgae and bacteria, microalgae-fungi symbiosis has demonstrated greater development prospect and higher energy efficiency and the energy consumption for pollutants and CO₂ removal were 14.2-39.0% · USD^-1 and 19.9-23.3% · USD^-1, respectively. Further, a sustainable recycling scheme is proposed for the purification of biogas slurry from anaerobic digestion process and biogas upgrading via microalgae-based technology.

Combined effect of salinity and pH on lipid content and fatty acid composition of Tisochrysis lutea

The haptophyte microalga Tisochrysis lutea was heterotrophically grown in F2 medium with different combinations of pH and salinity. Growth, oil content and fatty acids (FAs) profile were determined under each set of conditions. The salinity was adjusted using NaCl at concentrations of 0.4, 0.6, 0.8, or 1.0 M, while pH was adjusted at 7, 8, or 9, and heterotrophic growth was performed using organic carbon in the form of sugar cane industry waste (CM). Fatty acid methyl esters (FAMEs) were identified by gas chromatography. The results showed that pH of 8.0 was the optimal for dry weight and oil production, regardless of the salinity level. At pH 8.0, growth at a salinity of 0.4 M NaCl was optimal for biomass accumulation (1.185 g L^-1). Under these conditions, the maximum growth rate was 0.055 g L^-1 d^-1, with a doubling time of 17.5 h and a degree of multiplication of 2.198. Oil content was maximal (34.87%) when the salinity was 0.4 M and the pH was 9.0. The ratio of saturated to unsaturated FAs was affected by the pH value and salinity, in that unsaturated FAs increased to 58.09% of the total FAs, considerably greater than the value of 40.59% obtained for the control (0.4 M NaCl and pH 8.0).

Evaluation and Transcriptome Analysis of the Novel Oleaginous Microalga Lobosphaera bisecta (Trebouxiophyceae, Chlorophyta) for Arachidonic Acid Production

Arachidonic acid (AA) is an omega-6 long-chain polyunsaturated fatty acid and is important for human health. The coccoid green microalga Lobosphaera bisecta has been reported to be able to accumulate high AA content under certain conditions. Nutrient management and light intensity had significant effects on the biomass and accumulation of lipids and AA in L. bisecta SAG2043. Both a high nitrogen concentration (18 mM) and high light intensity (bilateral light-300 μmol m⁻² s⁻¹) were beneficial to the growth of L. bisecta, and the replacement of culture medium further enhanced the biomass, which reached 8.9 g L⁻¹. Low nitrogen concentration (3.6 mM) and high light significantly promoted the accumulation of lipids and AA. The highest lipid and AA content reached 54.0% and 10.8% of dry weight, respectively. Lipid compositions analysis showed that 88.2% of AA was distributed within the neutral lipids. We then reconstructed the lipid metabolic pathways of L. bisecta for the first time, and demonstrated that the upregulation of a key desaturase and elongase in the Δ6 pathway was conducive to the accumulation of fatty acids toward AA synthesis. L. bisecta SAG2043 exhibits high biomass, lipid and AA production. It may be a potential candidate for AA production.

Algal biorefinery: A sustainable approach to valorize algal-based biomass towards multiple product recovery

In recent years, ever-increasing socio-economic awareness, and negative impact of excessive petro consumption have redirected the research interests towards bio-resources such as algal-based biomass. In order to meet current bio-economy challenges to produce high-value multiple products at a time, new integrated processes in research and development are necessary. Though various strategies have been posited for conversion of algal-based biomass to fuel and fine chemicals, none of them has been proved as economically viable and energetically feasible. Therefore, a range of other bio-products needs to be pursued. In this context, the algal bio-refinery concept has appeared with notable solution to recover multiple products from a single operation process. Herein, an algal-based bio-refinery platform for fuel, food, and pharmaceuticals considering Bio-refinery Complexity Index (BCI) has been evaluated, as an indicator of techno-economic risks. This review presents recent developments on algal-biomass utilization for various value-added products as part of an integrated bio-refinery.

A review of the innovative gas separation membrane bioreactor with mechanisms for integrated production and purification of biohydrogen

This review article focuses on an assessment of the innovative Gas Separation Membrane Bioreactor (GS-MBR), which is an emerging technology because of its potential for in-situ biohydrogen production and separation. The GS-MBR, as a special membrane bioreactor, enriches CO₂ directly from the headspace of the anaerobic H₂ fermentation process. CO₂ can be fed as a substrate to auxiliary photo-bioreactors to grow microalgae as a promising raw material for biocatalyzed, dark fermentative H₂-evolution. Overall, these features make the GS-MBR worthy of study. To the best of the authors' knowledge, the GS-MBR has not been studied in detail to date; hence, a comprehensive review of this topic will be useful to the scientific community.