Wet in situ transesterification of spent coffee grounds with supercritical methanol for the production of biodiesel

Microalgal biorefineries in sustainable biofuel production and other high-value products

Microalgae has been emerging as a promising solution against the backdrop of the global need for sustainable, eco-friendly alternatives. This review article analyses the use of photosynthetic microalgae as an important resource for sustainable biofuel and high value bioproduct production, emphasizing the potential of self-sustaining microalgae biorefineries. A closed-loop, integrated multi-product producing microalgal biorefinery approach could significantly reduce the indicated negative environmental and energy impact from standalone microalgal biofuel generation. The economic feasibility of these biorefineries is linked to their recovery rate, improved by integrating various unit operations as well as multiple product dimensions under optimal conditions, enhancing resource recovery, process efficiency, and profitability. This approach ensures profitability and ubiquitous implementation of microalgal biorefineries, offering a sustainable solution to market demands. In conclusion, making microalgae biorefineries a major player in sustainable bioeconomy underscores the necessity of interdisciplinary research to surmount current challenges and completely realize their advantages.

Phenolic Acid Composition of Coffee Cascara in Connection with Antioxidant Capacity: A Geographic Assessment

Coffee cascara is an underutilized byproduct of coffee processing that has the potential for value-added applications due to its rich phytochemical content and antioxidant properties. The aim of this study was to characterize the phytochemical composition and antioxidant activity of coffee cascara sourced from seven geographic regions, and where possible, a variety of farms in different regions. We compared two different extraction methods: hot water/sonication-assisted extraction and methanol-water extraction to generate phytochemical content. The antioxidant capacity of extracts was assessed through different assays. Correlations between phytochemical compounds and different antioxidant activities were analyzed first using Pearson's correlations and then substantiated further using principal component analysis (PCA). The dominant phytochemicals identified in the extracted coffee cascara included gallic acid, chlorogenic acid isomers, mangiferin, protocatechuic acid and rutin. Among the water-extracted samples, the Brazil sample exhibited the highest oxygen radical absorbance capacity (ORAC) value, whereas the Zambia sample had the highest 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) value and the Laos sample showed the greatest inhibition of 2',7'-Dichlorofluorescein diacetate (DCFH-DA) fluorescence. For methanol extracts, the highest ORAC and ABTS values were from the Indonesia sample, and the Laos sample showed the strongest inhibition of DCFH-DA fluorescence. The results show the distinct phytochemical composition and antioxidant activity of coffee cascara according to geographical clustering using PCA. Specifically, gallic acid, p-hydroxybenzoic acid and to a lesser extent rutin correlated (p < 0.05) with ABTS and DCFH-DA assays. This study revealed significant variation in the chemical composition and antioxidant properties of coffee cascara across different geographic regions; less so with different farms associated with the location. The findings offer evidence for potential upscaling of coffee cascara waste for use in value-added functional food or nutraceutical applications.

Exploiting the Waste Biomass of Durian Shell as a Heterogeneous Catalyst for Biodiesel Production at Room Temperature

Durian shell, a biomass waste, was simply burned and then could serve as a heterogeneous catalyst for the transesterification reaction of palm oil with methanol at room temperature. The chemical composition, structure, and morphology of the catalyst were well-characterized by XRD, BET, SEM, TEM, EDS, TGA, FT-IR, and XPS measurement. With the preparation temperature rising to 350 °C, the maximum yield of the biodiesel could reach 94.1% at room temperature, and the optimum reaction conditions were 8 wt.% catalyst, 8:1 methanol/oil molar ratio, ad 2.5 h reaction time. The characterizations results indicated that K₂O and K₂CO₃ existed on the surface of catalyst, and a moderate amount of carbon, which acts as a carrier, attributed to the activity of the catalyst. After repeating five times, the catalyst prepared at 350 °C showed better stability than other catalysts. This might be because the incomplete combustion of the remaining carbon slowed down the loss of K to some extent.

The Potential of Spent Coffee Grounds @ MOFs Composite Catalyst in Efficient Activation of PMS to Remove the Tetracycline Hydrochloride from an Aqueous Solution

The efficient removal of Tetracycline Hydrochloride (TC) from wastewater, which is a difficult process, has attracted increasing attention. Aiming to synchronously achieve the goal of natural waste utilization and PMS activation, we have combined the MOFs material with waste coffee grounds (CG). The catalytic activity of the CG@ZIF-67 composite in the TC removal process was thoroughly evaluated, demonstrating that the TC removal rate could reach 96.3% within 30 min at CG@ZIF-67 composite dosage of 100 mg/L, PMS concertation of 1.0 mM, unadjusted pH 6.2, and contact temperate of 293.15 K. The ¹O₂ and ·SO₄^- in the CG@ZIF-67/PMS/TC system would play the crucial role in the TC degradation process, with ¹O₂ acting as the primary ROS. The oxygen-containing functional groups and graphite N on the surface of CG@ZIF-67 composite would play a major role in efficiently activating PMS and correspondingly degrading TC. In addition, the CG@ZIF-67/PMS/TC system could withstand a wide pH range (3-11). The application of CG in preparing MOF-based composites will provide a new method of removing emerging pollutants from an aqueous solution.

Reusing Waste Coffee Grounds as Electrode Materials: Recent Advances and Future Opportunities

Coffee industry produces more than eight million tons of waste coffee grounds (WCG) annually. These WCG contain caffeine, tannins, and polyphenols and can be of great environmental concern if not properly disposed of. On the other hand, components of WCG are mainly macromolecular cellulose and lignocellulose, which can be utilized as cheap carbon precursors. Accordingly, various forms of carbon materials have been reportedly synthesized from WCG, including activated carbon, mesoporous carbon, carbon nanosheets, carbon nanotubes, graphene sheet fibers (i.e., graphenated carbon nanotubes), and particle-like graphene. Upcycling of various biomass and/or waste into value-added functional materials is of growing significance to offer more sustainable solutions and enable circular economy. In this context, this review offers timely insight on the recent advances of WCG derived carbon as value-added electrode materials. As electrodes, they have shown to possess excellent electrochemical properties and found applications in capacitor/supercapacitor, batteries, electrochemical sensors, owing to their low cost, high electrical conductivity, polarization, and chemical stability. Collectively, these efforts could represent an environmentally friendly and circular economy approach, which could not only help solve the food waste issue, but also generate high performance carbon-based materials for many electrochemical applications.

A Review of Recent Advances in Spent Coffee Grounds Upcycle Technologies and Practices

Coffee is the world’s second largest beverage only next to water. After coffee consumption, spent coffee grounds (SCGs) are usually thrown away and eventually end up in landfills. In recent years, technologies and policies are actively under development to change this century old practice, and develop SCGs into value added energy and materials. In this paper, technologies and practices are classified into two categories, those reuses SCGs entirely, and those breakdown SCGs and reuse by components. This article provided a brief review of various ways to reuse SCGs published after 2017, and provided more information on SCG quantity, SCG biochar development for pollutant removal and using SCG upcycle cases for education. SCG upcycle efforts align the best with the UN Sustainable Development Goals (SDG) #12 “ensure sustainable consumption and production patterns,” the resultant fuel products contribute to SDG #7 “affordable and clean energy,” and the resultant biochar products contribute to SDG #6, “clean water and sanitation.”

Effects of Water Removal from Palm Oil Reactant by Electrolysis on the Fuel Properties of Biodiesel

Biodiesel, which is composed of mono-alkyl esters of long carbon-chained fatty acids, is used as an alternative fuel to petro-diesel. The water content of the reactant mixture of feedstock oil influences the extent of transesterification and thus the fuel characteristics. Lower water content in feedstock oil is generally suggested for successful transesterification. This experimental study removed water from the reactant mixture of feedstock palm oil and methanol during transesterification using various systems composed of either electrodes or molecular sieves with rotary vibration. The effect of input electrical energy, number of electrodes, vibration modes, and operating time on the amount of water removed from the reactant mixture and the fuel properties of the final biodiesel product were analyzed and compared with those achieved using molecular sieves. The results show that the biodiesel—after water was removed during transesterification—appeared to have increased kinematic viscosity, cetane index, distillation temperature, and acid value, while the heating value, flash point, ignition point, and water content decreased with an increase in the input electrical energy of the electrodes responsible for electrolyzing water away. Electrolysis by the double-pair electrodes was more effective at reducing acid value and water content than that performed by the single-pair electrodes under the same input electrical energy. The biodiesel was found to have the lowest water content (0.0304 wt.%) and the highest water-removal rate (0.011 wt.%) when water was removed during transesterification by the double-pair electrodes with an input electrical energy of 9 J/(g palm oil). The water-removal rate of the rotary-vibrating molecular sieves was 11.24 times that of the single-pair electrodes. The biodiesel was found to have increased kinematic viscosity with higher input electrical energy, reaching 5.15 mm2/s when the double-pair electrodes with an input electrical energy of 11 J/(g palm oil) were used. Longer carbon-chained fatty acids, ranging from C20 to C24, amounted to 0.74 wt.% of the biodiesel produced using the double-pair electrodes, which was greater than that seen for the single-pair electrodes. However, the molecular sieve method consumed more energy than the double-pair electrodes did to remove the same amount of water from the palm oil reactant mixture via transesterification.

Coffee biowaste valorization within circular economy: an evaluation method of spent coffee grounds potentials for mortar production

PURPOSE

Spent coffee grounds (SCG) are biowastes extensively generated within the coffee supply chain. Nowadays, their disposal represents an increasing environmental concern due to its toxicity and organic nature. With the estimated increase of coffee production and consumption in the upcoming years, there is an imperative need to find a proper reverse option, along with a novel industrial application, which allows for the valorization of this coffee by-product within a circular economy perspective. This study aims at investigating a potential reuse of spent coffee grounds to produce novel construction materials to be used for sustainable buildings.

METHODS

After having illustrated the forward flows within the coffee life cycle and the potential reverse flow options, an evaluation method based on multi-criteria analyses was elaborated to test not only the technical but also the environmental and economic performances of novel materials originating from the incorporation of SCG as an aggregate in natural hydraulic lime and geopolymer-based mortars. Moreover, we focus on the reuse of another waste streams- biomass fly ash-deriving from the paper-pulp industry, rarely investigated in both traditional construction applications and in geopolymer manufacture. The two (geopolymer- and lime-based) mortar typologies are here studied and compared as potential green material for applications in construction, with satisfying engineering performance and high insulation attitude, giving a new life to a common organic waste. Consequently, we compare eight formulations by means of multi-criteria approaches that are nowadays claimed as a useful and effective decision aiding support instrument to assess the development of new sustainable construction materials. They permit to consider simultaneously some controversial and often uncertain aspects like technological (as the usual scientific studies do), environmental, and economic (more difficult to easily approach and evaluate). For this purpose, in this paper, we have analyzed the performance of the novel bio-composite mortars using VIKOR and TOPSIS methods to rank a set of alternatives according to various evaluation criteria that often conflict one with each other.

RESULTS

Results show that adding spent coffee grounds can efficiently improve the technical and sustainable performances of the novel mortars for different applications in the building sector. The presence of SCG increases water absorption and improves the insulation performance along with an environmental impact reduction. The considered technological properties are highly promising-such as the improvement in thermal insulation. In particular, even the addition of only 5% SCG leads to a significant reduction of the thermal conductivity and consequently to a greater insulating performance.

CONCLUSIONS

To date, most of the available literature on recycling SCG in construction materials do not consider mortar-based applications and, moreover, nor multi-criteria approaches. Therefore, our study proposes itself as an innovative track solution to food waste management lowering the employment of non-renewable natural resources and the costs associated to construction material production. At the same time, a novel and innovative way of such waste disposal is suggested, pursuing the sustainability and substantially reducing the environmental impact of construction and building materials. This study is a fundamental step in assessing the applicability of our designed and produced materials and its potentials to be produced at an industrial scale.

Antioxidant and Anti-Inflammatory Profiles of Spent Coffee Ground Extracts for the Treatment of Neurodegeneration

Spent coffee grounds (SCGs), waste products of coffee beverage production, are rich in organic compounds such as phenols. Different studies have demonstrated phenol beneficial effects in counteracting neurodegenerative diseases. These diseases are associated with oxidative stress and neuroinflammation, which initiates the degeneration of neurons by overactivating microglia. Unfortunately, to date, there are no pharmacological therapies to treat these pathologies. The aim of this study was to evaluate the phenolic content of 4 different SCG extracts and their ability to counteract oxidative stress and neuroinflammation. Caffeine and 5-O-caffeoylquinic acid were the most abundant compounds in all extracts, followed by 3-O-caffeoylquinic acid and 3,5-O-dicaffeoylquinic acid. The four extracts demonstrated a different ability to counteract oxidative stress and neuroinflammation in vitro. In particular, the methanol extract was the most effective in protecting neuron-like SH-SY5Y cells against H₂O₂-induced oxidative stress by upregulating endogenous antioxidant enzymes such as thioredoxin reductase, heme oxygenase 1, NADPH quinone oxidoreductase, and glutathione reductase. The water extract was the most effective in counteracting lipopolysaccharide-induced neuroinflammation in microglial BV-2 cells by strongly reducing the expression of proinflammatory mediators through the modulation of the TLR4/NF-κB pathway. On these bases, SCG extracts could represent valuable nutraceutical sources for the treatment of neurodegeneration.

From brown to colored: Polylactic acid composite with micro/nano-structured white spent coffee grounds for three-dimensional printing

Functional fillers in three-dimensional (3D) printing composite filaments offer an innovative way spent coffee grounds (SCGs) can be reused. However, the inherent brownness of SCGs places a limit on the color in which the composite filament and, consequently, the finished print appears. Herein, colored composite filaments for fused deposition modeling were successfully fabricated, where micro/nano-structured decolorized SCGs (MN-DSCGs) were embedded within polylactic acid (PLA) matrix. At the optimum condition, the 3D prints using composite filaments exhibit comparable tensile and flexural strength to the PLA counterparts. Also, they demonstrate superior melt flow and excellent print quality. Under the same condition, 3D printed MN-DSCGs/PLA blend has sufficient color restoration as compared to the prints using virgin PLA.

Microbial biodiesel production from industrial organic wastes by oleaginous microorganisms: Current status and prospects

This review aims to encourage the technical development of microbial biodiesel production from industrial-organic-wastes-derived volatile fatty acids (VFAs). To this end, this article summarizes the current status of several key technical steps during microbial biodiesel production, including (1) acidogenic fermentation of bio-wastes for VFA collection, (2) lipid accumulation in oleaginous microorganisms, (3) microbial lipid extraction, (4) transesterification of microbial lipids into crude biodiesel, and (5) crude biodiesel purification. The emerging membrane-based bioprocesses such as electrodialysis, forward osmosis and membrane distillation, are promising approaches as they could help tackle technical challenges related to the separation and recovery of VFAs from the fermentation broth. The genetic engineering and metabolic engineering approaches could be applied to design microbial species with higher lipid productivity and rapid growth rate for enhanced fatty acids synthesis. The enhanced in situ transesterification technologies aided by microwave, ultrasound and supercritical solvents are also recommended for future research. Technical limitations and cost-effectiveness of microbial biodiesel production from bio-wastes are also discussed, in regard to its potential industrial development. Based on the overview on microbial biodiesel technologies, an integrated biodiesel production line incorporating all the critical technical steps is proposed for unified management and continuous optimization for highly efficient biodiesel production.

Transesterification of rapeseed oil and waste corn oil toward the production of biodiesel over a basic high surface area magnetic nanocatalyst: application of the response surface methodology in process optimization

A new, green, and recoverable catalyst is prepared for the synthesis of biodiesel.

A review on valorization of spent coffee grounds (SCG) towards biopolymers and biocatalysts production

Spent coffee grounds (SCG) are an important waste product millions of tons generated from coffee consumption and could be effectively utilized for various applications due to their high organic content. SCG can be used as a potential feedstock to develop coffee-based biorefinery towards value-added products generation through various biotechnological processes. Considerable developments have been reported on emerging SCG-based processes/products in various environmental fields such as removal of heavy metals and cationic dyes and in wastewater treatment. In addition, SCG are also utilized to produce biochar and biofuels. This review addressed the details of innovative processes used to produce polymers and catalysts from SCG. Moreover, the application of these developed products is provided and future directions of the circular economy for SCG utilization.

Switchable solvent N, N, N', N'-tetraethyl-1, 3-propanediamine was dissociated into cationic surfactant to promote cell disruption and lipid extraction from wet microalgae for biodiesel production

Switchable solvent N, N, N', N'-tetraethyl-1,3-propanediamine (TEPDA) was proposed to extract lipids from wet Nannochloropsis oceanica with a 5% higher extraction efficiency than chloroform-methanol. It was found that TEPDA acted mainly as an organic solvent to soften and dissolve lipids, while a small amount of TEPDA was dissociated into tertiary amine ion, i.e.,(C₂H₅)₂N-(CH₂)₃-NH⁺(C₂H₅)₂. This cation acted as a surfactant to promote cell disruption and lipid separation. With moisture increasing from 0 to 84 wt%, more TEPDA was dissociated into cationic surfactant to induce local rearrangement of phospholipid bilayers in cell membranes through electrostatic interaction, resulting in the fractal dimension of disrupted cells increased from 1.49 to 1.66. Accordingly, the yield of fatty acid methyl ester (FAME) through transesterification of lipids extracted with TEPDA increased by 9%, while FAME yield from lipids extracted with chloroform and n-hexane decreased by 41% and 65%, respectively.

Experimental and feasibility study of spent coffee grounds upscaling via pyrolysis towards proposing an eco-social innovation circular economy solution

There is a need for eco-social business models in the food waste sector that are more cascading and circular-based, while having economic, environmental and social benefits. The aim of this study is to bring insights and data of spent coffee grounds large-scale slow pyrolysis, to seize new opportunities for eco-innovative solutions in the circular economy, by identifying upcycling opportunities for resource recovery of this waste. First, an experimental study was conducted, and a set of pyrolysis experiments were carried out at a temperature range from 450 to 750 °C, with a heating rate of 50°/s, under helium atmosphere, to explore the products' yields and the best process' conditions. Second, an economic study was conducted for a standalone pyrolysis plant fueled with the spent coffee grounds streams from coffee shops of a city with 150,000 inhabitants, in central Greece, aiming at the cost and the profitability of the endeavor estimation. The calculations were based on the features of a slow pyrolysis rotary kiln technology designed at Aristotle University, and co-developed with an Irish company, under the funding of an EU LIFE+ project. For an estimated capacity of 2566 t/yr of SCG, the revenue of the endeavor was calculated at 47€/t of SCG. The economic indicators ROI and POT (ROI = 0.24, POT = 2.6), are very positive, suggesting pyrolysis of SCG as an efficient circular economy management solution, providing an eco-social innovation business in the coffee shop industry, engaging also consumers in the circular economy.

One-pot selective production of levulinic acid and formic acid from spent coffee grounds in a catalyst-free biphasic system

This study introduces the catalyst-free production of levulinic acid (LA) and formic acid (FA) from spent coffee grounds (SCGs) as a starting material in a biphasic system of 1,2-dichloroethane (DCE)-water at temperatures above 160 °C. In addition to the advantage of using the biphasic system attributed to the product equilibrium, DCE served as a source of hydrogen induced by subcritical water (SCW). The effect of temperature, the amount of DIW and DCE, and the pretreatment on SCG (raw or lipid extracted SCG (LE-SCG)) on the overall reaction and humin formation were studied. The maximum conversion of LA and FA was 47 and 29 w/w% of the total convertible monosaccharides in raw SCGs while 43 and 28 w/w% of the conversion were obtained at 180 °C when LE-SCG was used. The solvothermal effects of two media provides a non-catalytic route to utilize undried SCG for the production of LA and FA.

Resource Recovery from Waste Coffee Grounds Using Ultrasonic-Assisted Technology for Bioenergy Production

Biodiesel is a proven alternative fuel that can serve as a substitute for petroleum diesel due to its renewability, non-toxicity, sulphur-free nature and superior lubricity. Waste-based non-edible oils are studied as potential biodiesel feedstocks owing to the focus on the valorisation of waste products. Instead of being treated as municipal waste, waste coffee grounds (WCG) can be utilised for oil extraction, thereby recovering an energy source in the form of biodiesel. This study evaluates oil extraction from WCG using ultrasonic and Soxhlet techniques, followed by biodiesel conversion using an ultrasonic-assisted transesterification process. It was found that n-hexane was the most effective solvent for the oil extraction process and ultrasonic-assisted technology offers a 13.5% higher yield compared to the conventional Soxhlet extraction process. Solid-to-solvent ratio and extraction time of the oil extraction process from the dried waste coffee grounds (DWCG) after the brewing process was optimised using the response surface methodology (RSM). The results showed that predicted yield of 17.75 wt. % of coffee oil can be obtained using 1:30 w/v of the mass ratio of DWCG-ton-hexane and 34 min of extraction time when 32% amplitude was used. The model was verified by the experiment where 17.23 wt. % yield of coffee oil was achieved when the extraction process was carried out under optimal conditions. The infrared absorption spectrum analysis of WCG oil determined suitable functional groups for biodiesel conversion which was further treated using an ultrasonic-assisted transesterification process to successfully convert to biodiesel.

Biorefinery of spent coffee grounds waste: Viable pathway towards circular bioeconomy

The circular bioeconomy plan is an innovative research based scheme intended for augmenting the complete utilization and management of bio-based resources in a sustainable biorefinery route. Spent coffee grounds based biorefinery is the emerging aspect promoting circular bioeconomy. The sustainable circular bioeconomy by utilizing SCG is achieved by cascade approaches and the inclusion of many biorefinery approaches to obtain many bio-products. The maximum energy recovery can be obtained by process integration. The economic analysis of the biofuel production from SCG is dependent on the cost of raw material, transportation, the need of labor and energy, oil extraction operations and biofuel production. The inclusion of new products from already established product can minimize the investment cost when related to the production cost. A positive net present value can be achieved via SCG biorefinery which indicates the profitability of the process.

Evaluation of CO2-induced azole-based switchable ionic liquid with hydrophobic/hydrophilic reversible transition as single solvent system for coupling lipid extraction and separation from wet microalgae

The utilization of microalgae as bioenergy source was limited by the excessive cost and energy consumption during the process of lipid extraction and separation. CO₂-induced switchable ionic liquids (S-ILs) with reversible hydrophobic-hydrophilic conversion were synthesized and applied for lipid extraction and separation. The reversible transition mechanism of switchable IL is due to the formation of carbamate. The novel approach based on S-ILs was developed for lipid extraction from wet microalgae, which coupled microalgae cell disruption, lipid extraction, separation, and solvent recovery process without additional solvents. The highest lipid extraction efficiencies from wet microalgae were obtained by C₆DIPA-Im, and the lipids were recovered from the extraction phase by simply bubbling CO₂. Furthermore, C₆DIPA-Im maintained more than 83.6 ± 3.6% of its initial lipid extraction efficiency after recycling five times. The S-IL based extraction and separation method provides a new strategy for sustainable bioenergy production.

Biodiesel production by direct transesterification of wet spent coffee grounds using switchable solvent as a catalyst and solvent

Spent coffee grounds (SCGs) are a promising material for sustainable preparation of biodiesel. This study proposed a new approach for biodiesel synthesis from wet SCGs using 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as both a green solvent and catalyst. The optimal reaction conditions were determined as a methanol amount of 6.25 mL/g of wet SCGs, DBU amount of 14.46 mL/g of wet SCGs, temperature of 60.2 °C, and reaction time of 28.65 min through response surface methodology. Under these conditions, the maximum biodiesel yield was 97.18%. Notably, DBU polarity could be regulated reversibly, facilitating its reusability and a simple process for product separation. Under optimal conditions, DBU could be potentially reused for at least 10 cycles to yield high amounts of biodiesel. This study suggests that the switchable solvent-assisted direct transesterification of wet SCGs is a potential, efficient, cost-effective, and eco-friendly approach for biodiesel synthesis.

Using switchable solvent as a solvent and catalyst for in situ transesterification of spent coffee grounds for biodiesel synthesis

This study developed a novel in situ transesterification process by combining the solvent and catalyst functions of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) for biodiesel synthesis from spent coffee grounds (SCG). The influence of reaction parameters on the reaction was investigated. The maximum biodiesel yield of 96.13% was observed at DBU-to-SCG and methanol-to-SCG ratios of 20 and 10 mL/g, respectively; a reaction temperature of 130 °C; and a reaction time of 60 min. Notably, the polarity of DBU could be reversibly regulated, thus facilitating excellent product separation. Moreover, DBU could be effectively reused for 10 cycles to yield high biodiesel conversion. DBU-catalyzed in situ transesterification of SCG is a promising, ecofriendly, and economically viable biodiesel production process.

Direct biodiesel production from wet spent coffee grounds

Utilization of waste spent coffee grounds (SCG) remains limited and requires pre-treatment before being discarded to avoid pollution to the environment. Lipids contained in SCG could be converted to biodiesel through an in situ transesterification method. Current in situ transesterification of wet SCG biomass, conducted at high reaction temperature to reduce the water effect and reduce reaction time, is energy intensive. A new approach, which combines simultaneous extraction-transesterification in a single step using soxhlet apparatus, was developed to produce biodiesel directly from wet SCG biomass. A homogeneous base catalyst at a concentration of 0.75 M showed better catalytic activity than acid, with hexane as a co-solvent on fatty acid (FA) extraction efficiency and FA to fatty acid methyl ester (FAME) conversion efficiency. Studying the factorial effect of ratio of methanol to hexane and reaction time led to the highest FA to FAME conversion efficiency of 97% at a ratio of 1 : 2 and 30 min reaction time. In addition, the catalyst could be used five times without losing its activity. In term of energy consumption, the reactive extraction soxhlet (RES) method could save 38–99% of energy compared to existing methods.

Here, we demonstrate the direct biodiesel production from wet SCG in mild reaction temperature and short reaction time using reactive extraction Soxhlet (RES) method.

Thermochemical conversion of cobalt-loaded spent coffee grounds for production of energy resource and environmental catalyst

Thermochemical conversion of cobalt (Co)-loaded lignin-rich spent coffee grounds (COSCG) was carried out to find the appropriate pyrolytic conditions (atmospheric gas and pyrolytic time) for syngas production (H₂ and CO) and fabricate Co-biochar catalyst (CBC) in one step. The use of CO₂ as atmospheric gas and 110-min pyrolytic time was optimal for generation of H₂ (∼1.6 mol% in non-isothermal pyrolysis for 50 min) and CO (∼4.7 mol% in isothermal pyrolysis for 60 min) during thermochemical process of COSCG. The physicochemical properties of CBC fabricated using optimized pyrolytic conditions for syngas production were scrutinized using various analytical instruments (FE-SEM, TEM, XRD, and XPS). The characterizations exhibited that the catalyst consisted of metallic Co and surface wrinkled carbon layers. As a case study, the catalytic capability of CBC was tested by reducing p-nitrophenol (PNP), and the reaction kinetics of PNP in the presence of CBC was measured from 0.04 to 0.12 s^-1.