Enhanced performance and hindered membrane fouling for the treatment of coal chemical industry wastewater using a novel membrane electro-bioreactor with intermittent direct current

Gaining comprehensive insight into the effect of electrocoagulation integrated in a membrane bioreactor on the detergent manufacturing plant wastewater treatment and membrane fouling

This study evaluated the integration of electrocoagulation into a lab-scale membrane bioreactor (EC-MBR) for treating wastewater from a detergent manufacturing plant. The EC-MBR system achieved a higher chemical oxygen demand (COD) and anionic surfactant removal efficiencies of 95.1% and 99.7% compared to 93.3% and 98.7% in the MBR system, respectively. Sludge volume index and mixed liquor supernatant turbidity revealed superior sludge settling and flocculation ability, respectively, in the EC-MBR system compared to the MBR system. Membrane fouling was less severe in the EC-MBR system, linked to reduced concentrations of soluble microbial products and loosely bond extracellular polymeric substances, especially their protein to carbohydrate ratio, as well as increased particle size in the mixed liquor. Fourier transform infrared spectroscopy (FTIR) analysis indicated that the membrane cake layer was mainly composed of protein and carbohydrate. Scanning electron microscopy (SEM) revealed microbial clusters in the MBR system composed of rod- and oval-shaped bacteria, while the EC-MBR system primarily showed spherical microbial structures. The EC-MBR system demonstrated low energy consumption (1.75 kWh m-³) and operating costs ($0.55 m-³), highlighting its efficiency and cost-effectiveness for sustainable wastewater management.

Sustainable control of microplastics in wastewater using the electrochemically enhanced living membrane bioreactor

Wastewater treatment plant (WWTP) discharges are major contributors to the release of microplastics (MPs) into the environment. This research work aimed to assess the performance of the novel living membrane bioreactor (LMBR), which utilizes a biological layer as a membrane filter for the removal of polyethylene (PE) MPs from wastewater. The impact of an intermittently applied low current density (0.5 mA/cm2) on the reduction of MPs in the electrochemically enhanced LMBR (e-LMBR) has also been examined. The reactors were also compared to a conventional membrane bioreactor (MBR) and an electro-MBR (e-MBR). 1H nuclear magnetic resonance spectroscopy (1H NMR) was implemented for the MPs detection and quantification in terms of mass per volume of sample. The LMBR and MBR achieved comparable mean PE MPs reduction at 95% and 96%, respectively. The MPs mass reduction in the e-LMBR slightly decreased by 2% compared to that achieved in the LMBR. This potentially indicated the partial breakdown of the MPs due to electrochemical processes. Decreasing and inconsistent NH4-N and PO4-P removal efficiencies were observed over time due to the addition of PE MPs in the MBR and LMBR. In contrast, the integration of electric field in the e-MBR and e-LMBR resulted in consistently high values of conventional contaminant removals of COD (99.72-99.77 %), NH4-N (97.96-98.67%), and PO4-P (98.44-100.00%), despite the MPs accumulation. Integrating electrochemical processes in the e-LMBR led to the development of a stable living membrane (LM) layer, as manifested in the consistently low effluent turbidity 0.49 ± 0.33 NTU. Despite the increasing MPs concentration in the mixed liquor, applying electrochemical processes reduced the fouling rates in the e-LMBR. The e-LMBR achieved comparable efficiencies in contaminant reductions as those observed in the e-MBR, while using a low-cost membrane material.

Electro living membrane bioreactor for highly efficient wastewater treatment and fouling mitigation: Influence of current density on process performances

The next generation of the self-forming dynamic membrane, referred to in this study as the "Living Membrane (LM)", is a new patented technology based on an encapsulated biological layer that self-forms on a designed coarse-pore size support material during wastewater treatment and acts as a natural membrane filter. Integrating electrochemical processes with wastewater treatment using the LM approach has also been recently studied (the reactor is referred to as the Electro-Living Membrane Bioreactor or e-LMBR). This study investigated the effects of varying current densities, i.e., 0.3, 0.5, and 0.9 mA/cm2, on the performance of an e-LMBR. The results were also compared with those of the Living Membrane Bioreactor or LMBR (without applied current density). Higher pollutant removals were observed in the presence of the electric field. However, the effect of varying applied current densities on the COD (98-99 %), NH3-N (97-99 %), and PO43-P (100 %) removals was not statistically significant. The more prominent differences (p < 0.05) were observed in the decrease of NO3--N concentrations from mixed liquor to effluent, with increasing current density resulting in lower mean NO3--N effluent concentrations (0.3 mA/cm2: 6.13 mg/L; 0.5 mA/cm2: 4.38 mg/L; 0.9 mA/cm2: 3.70 mg/L). The reduction of NO3--N concentrations as wastewater permeated through the LM layer also confirmed its role in removing nitrogen-containing compounds. Higher current densities resulted in lower concentrations of fouling substances, particularly those of microbial extracellular polymeric substances (EPS) and transparent exopolymer particles (TEPs). The average values of the temporal variation of transmembrane pressure (d(TMP)/d(t)) in the e-LMBR were extremely low, in the range of 0.013-0.041 kPa/day, throughout the operation period. The highest (d(TMP)/d(t)) was observed for the highest current density. However, the TMP values remained below 2 kPa in all the e-LMBR runs even after the initial LM formation stage.

Membrane processes enhanced by various forms of physical energy: A systematic review on mechanisms, implementation, application and energy efficiency

Membrane technologies in water and wastewater treatment have been eagerly pursued over the past decades, yet membrane fouling remains the major bottleneck to overcome. Membrane fouling control methods which couple membrane processes with online in situ application of external physical energy input (EPEI) are getting closer and closer to reality, thanks to recent advances in novel materials and energy deliverance methods. In this review, we summarized recent studies on membrane fouling control techniques that depend on (i) electric field, (ii) acoustic field, (iii) magnetic field, and (iv) photo-irradiation (mostly ultraviolet or visible light). Mechanisms of each energy input were first reported, which defines the applicability of these methods to certain wastewater matrices. Then, means of implementation were discussed to evaluate the compatibility of these fouling control methods with established membrane techniques. After that, preferred applications of each energy input to different foulant types and membrane processes in the experiment reports were summarized, along with a discussion on the trends and knowledge gaps of such fouling control research. Next, specific energy consumption in membrane fouling control and flux enhancement was estimated and compared, based on the experimental results reported in the literature. Lastly, strength and weakness of these methods and future perspectives were presented as open questions.

Research progress of electrically-enhanced membrane bioreactor (EMBR) in pollutants removal and membrane fouling alleviation

Membrane bioreactor (MBR), as a biological unit for wastewater treatment, has been proven to have the advantages of simple structure and high pollutant removal rate. However, membrane fouling limits its wide application, and it is crucial to adopt effective membrane fouling control methods. As a new type of membrane fouling control technology, electrically-enhanced MBR (EMBR) has attracted more interest recently. It uses the driving force of electric field to make pollutants flocculate or move away from the membrane surface to achieve the purpose of inhibiting membrane fouling. This paper expounds the configuration of EMBR in recent years, including the location of membrane components, the way of electric field application and the selection of electrode and membrane materials, and provides the latest development information in various aspects. The enhanced effect of electric field on the removal of comprehensive and refractory pollutants is outlined in detail. And from the perspective of sludge properties (EPS, SMP, sludge particle size, zeta potential and microbial activity), the influence of electric field on sludge characteristics and the relationship between the changes of sludge properties in EMBR and membrane fouling are discussed. Moreover, the electrochemical mechanisms of electric field alleviating membrane fouling are elucidated from electrophoresis, electrostatic repulsion, electroflocculation, electroosmosis, and electrochemical oxidation, and the regeneration and stability of EMBR are assessed. The existing challenges and future research directions are also proposed. This review could provide theoretical guidance and further studies for subsequent topic, and promoting the wide engineering applications of EMBR.

Catalytic oxidation of 4-acetamidophenol with Fe3+-enhanced Cu0 particles: In-site generation and activation of hydrogen peroxide

Cu⁰ coupled with O₂ was used to degrade contaminant due to in-site generation and catalysis of H₂O₂, while the low reactivity and active dismutation reaction of Cu⁺ refrained the performance at acidic condition. In this study, the removal rate of 4-acetamidophenol increased from 27 % to 83.4 % with Fe³⁺ spiked into the Cu⁰ system within 60 min •OH was the primary reactive species in the Fe³⁺/Cu⁰ system. In the Fe³⁺/Cu⁰ system, Cu⁰ was corroded to form Cu⁺ by H⁺ and O₂, and then Cu⁺ interacted with O₂ generating H₂O₂, and meanwhile Fe³⁺ was reduced to Fe²⁺ by Cu⁺ and Cu⁰; Consequently, Cu⁺ and Fe²⁺ induced H₂O₂ to produce •OH, but Fe²⁺ was easier to catalyze H₂O₂ than Cu⁺ at acidic pH. Except for fulvic acid, common water matrix including sulfate ion, phosphate ion, chloride ion and nitrate ion had no inhibition effect on the degradation of 4-acetamidophenol in the Fe³⁺/Cu⁰ system. over 62 % of 4-acetamidophenol in tap water, Hou-lake water and well water was greatly oxidized by the Fe³⁺/Cu⁰ system. Furthermore, the amount of total dissolved copper decreased to 0.895 mg/L by the method of alkali precipitation in the Fe³⁺/Cu⁰ system. The study provided a theoretical direction to the Fe³⁺-enhanced Cu⁰ system for purifying wastewater.

Membrane fouling mitigation by coagulation and electrostatic repulsion using an electro-AnMBR in kitchen wastewater treatment

Anaerobic membrane bioreactor (AnMBR) is considered an efficient technique for kitchen wastewater treatment; however, membrane fouling restricts their applicability. In this study, a novel AnMBR with an Fe anode and Ti membrane cathode (electro-AnMBR) was constructed. The reactor exhibited good performance in pollutant removal and antifouling in kitchen wastewater treatment. Compared with the traditional AnMBR, the electro-AnMBR increased phosphate removal by approximately 55% and reduced transmembrane pressure (TMP) by 50%. Coagulation from the Fe²⁺/Fe³⁺ released by the sacrificial anode increased the sludge floc size and porosity, significantly reducing the membrane fouling potential. In addition, the lower amounts of extracellular polymeric substances (EPS) in the electro-AnMBR, due to an increased Methanosarcina abundance, facilitated membrane-fouling mitigation. Almost no TMP difference was observed between the AnMBRs with Ti, ceramic, and polyvinylidene fluoride (PVDF) membranes. Quantitative analysis using an electrochemical quartz crystal microbalance with dissipation monitoring indicated that the electrostatic repulsion between EPS and cathodic membrane was positively correlated with the applied voltage. In addition, proteins in EPS had a higher membrane fouling potential than polysaccharides, and Fe³⁺ coagulation reduced adhesion capacity and alleviated membrane fouling. This study provides a perspective viewpoint for AnMBR membrane fouling mitigation and reactor design.

Efficient removal of ibuprofen and ofloxacin pharmaceuticals using biofilm reactors for hospital wastewater treatment

Hospital wastewater is harmful to the environment and human health due to its complex chemical composition and high potency towards becoming a source of disease outbreaks. Due to these complexities, its treatment is neither efficient nor cost-effective. It is a challenging issue that requires immediate attention. This effort focuses on the treatment of hospital wastewater (HWW) by removing two selected drugs, namely ibuprofen (IBU) and ofloxacin (OFX) using individual biological treatment methods, such as moving bed biofilm reactors (MBBR) and physicochemical treatment, such as ozonation and peroxane process. The both methods are compared to find the best method overall based on effectiveness and removal efficiency. The optimal removal for ozone dosing range was nitrate (9.00% and 62.00%), biological oxygen demand (BOD) (92.00% and 64.00%), and chemical oxygen demand (COD) (96.00% and 92.00%) that required at least 10 min to reach considerable degradation. The MBBR process assured a better performance for ibuprofen removal, overall. The IBU and OFX removal was found to be 14.32-96.00% at a higher COD value and 11.33-94.00% at a lower COD value due to its biodegradation. This work strives to pave the way forward to build an HWW treatment technology using integrated MBBR processes for better efficiency and cost-effectiveness.

Removal of organic matter and nutrients from hospital wastewater by electro bioreactor coupled with tubesettler

Wastewater consisting of different pharmaceuticals and drug residues is quite challenging to treat and dispose of. This situation poses a significant impact on the health aspect of humans and other biotic organisms in the environment. The main concern of hospital wastewater (HWW) is the resistivity towards treatment using the different conventional methods. For the treatment of HWW, this study was performed using an electro bioreactor using hospital wastewater. The electro reduction overcomes the effect of toxic elements in hospital wastewater, and biodegradation removes organic matter and nutrients from wastewater. This study investigated electro bioreactor performance for treating hospital wastewater connected with tubesettler. The parameters of chemical oxygen demand, nitrate, and phosphate concentration were analyzed to evaluate an influent and effluent from electro bioreactor and tubesettler. Also, Kinetic modelling for chemical oxygen demand, nitrate, and phosphate removal was done. The chemical oxygen demand was reduced by 76% in electro bioreactor, and 31% in tubesettler, 84%. The nitrate and phosphate were reduced within permissible discharge limits with a final effluent concentration of 1.4 mg L^-1 and 3 mg L^-1. Further studies are required to assess the impact of pharmaceutical compounds in hospital wastewater on the system's performance.

Biological nutrients removal performance under starvation stress: Efficacy deterioration and recovery

Biological nutrients removal performance affected by starvation stress was investigated via the addition of pre-anoxic stage to SBR. COD removal efficiency maintained at around 90% regardless of the starvation stress. Starvation stress presented significant impact on nitrogen and phosphorus removal, with noticeable reduction of TN removal and remarkable deterioration of TP removal as prolonging the pre-anoxic time, which was mainly attributed to the integrative effect of carbon source competition, depression of denitrification and invalid P release as well as the variation of microbial community. It was notable that starvation stress exerted distinct evolution on microbial community. The improvement in relative abundance of the certain genera relating to denitrification was the main reason for the partial recovery of nitrogen removal after eliminating stress starvation. The promotion of P uptake capacity accompanied with the relief of invalid P release and the enriched DPAOs accounted for the complete recovery of phosphorus removal.

Investigation and evaluation of membrane fouling in a microbial fuel cell-membrane bioreactor systems (MFC-MBR)

Two membrane bioreactors with and without adding an electric circuit (named as MFC-MBR and C-MBR, respectively) were established to investigate the effects of micro-electric field on membrane fouling. With the aeration rate of 1.5 L/min, the synergistic effect of aeration and micro-electric field was the best in reducing membrane fouling and COD in treatment of a simulated phenol wastewater. Compared with C-MBR, the running time of MFC-MBR was extended for 16 days. Scanning electron microscope (SEM) and energy-dispersive X-ray detector (SEM-EDX) demonstrated that less foulants were attached to the membrane and the attachment was loosend in MFC-MBR. The decreased absolute value of zeta potential indicated repulsion among the negatively-charged sludge particles was reduced and flocculation of the sludge was improved, which alleviated the membrane fouling. The soluble microbial products (SMP) and loosely-bound extracellular polymeric substances (LB-EPS) were also decreased in MFC-MBR. It was found that migration and neutralization of the negatively-charged particles, and degradation of microorganisms contributed to the alleviation of membrane fouling. Moreover, the decreases of carbohydrates in LB-EPS led to higher protein/carbohydrates (PN/PS) ratio, which was a key parameter for alleviating membrane fouling. Meanwhile, the increase of tightly bound extracellular polymeric substances (TB-EPS) could also slow down membrane fouling. Because TB-EPS can be used as a binder to strengthen the flocculation of sludge particles.

Effective leachate treatment by a pilot-scale submerged electro-membrane bioreactor

Most landfill leachates contain organic compounds that cannot be easily separated by conventional biological processes. Recently, integration of membrane bioreactors and electro-oxidation has been proposed as a suitable option for the treatment and separation of organic and inorganic contaminants in leachate. Therefore, in the present study, the performance of submerged electro-membrane bioreactor (SEMBR) along with a conventional membrane bioreactor (MBR) on a pilot scale was evaluated for the treatment of leachate. Both bioreactors were used to compare treatment efficiency under the same conditions. The removal rates of chemical oxygen demand (COD), ammonia nitrogen (NH₄⁺-N), phosphate (PO₄^3--P), color, UV₂₅₄, and metals were investigated. The results showed that applying electric current to the MBR could approximately increase the COD removal efficiency from 94 to 98.5%; PO₄^3--P removal from 70 to 99%; NH₃⁺-N removal from 91 to 99%; UV₂₅₄ removal from 80 to 96%; and heavy metals removal from 40 to 95%. Humic acid removal efficiency as another indicator of humic substances was increased from 75% in the MBR to 96% in the SEMBR process. The results also showed that the effluent can be introduced into the wastewater treatment plant for further treatment. The SEMBR process achieved a minimization of fouling of membranes compared to conventional MBR. The consumption of the energy and electrode was in accordance with the previous results, and the required energy of 1.57 kWh/m³ of wastewater was calculated. The sludge volume index (SVI) in SEMBR (105 ml/g) was better than MBR (135 ml/g) due to the electrokinetic effect on the production of denser flocs. Based on the results, it can be concluded that the application of electric current can improve the performance of MBR in removing PO₄^3-, NH₄⁺, and membrane fouling.

A Critical Review on Electric Field-Assisted Membrane Processes: Implications for Fouling Control, Water Recovery, and Future Prospects

Electrofiltration, an electric field-assisted membrane process, has been a research topic of growing popularity due to its ability to improve membrane performance by providing in situ antifouling conditions in a membrane system. The number of reports on electrofiltration have increased exponentially over the past two decades. These reports explored many innovations, such as novel configurations of an electric field, engineered membrane materials, and interesting designs of foulant compositions and membrane modules. Recent electrofiltration literature focused mainly on compiling results without a comprehensive comparative analysis across different works. The main objective of this critical review is to, first, organize, compare and contrast the results across various electrofiltration studies; second, discuss various types of mechanisms that could be incorporated into electrofiltration and their effect on membrane system performance; third, characterize electrofiltration phenomenon; fourth, interpret the effects of various operational conditions on the performance of electrofiltration; fifth, evaluate the state-of-the-art knowledge associated with modeling efforts in electrofiltration; sixth, discuss the energy costs related to the implementation of electrofiltration; and finally, identify the current knowledge gaps that hinder the transition of the lab-scale observations to industry-scale electrofiltration as well as the future prospects of electrofiltration.

Strength and Durability Properties of Antimony Tailing Coarse Aggregate (ATCA) Concrete

Antimony (Sb) is a trace element applied widely in modern industry. A large number of tailing solid wastes are left and accumulated in the mining area after purifying the precious antimony from the antimony ores, causing serious pollution to the environment. The major aim of this study is to investigate the feasibility of utilizing antimony tailing coarse aggregate (ATCA) as a complete substitute for natural coarse aggregate (NCA) in high-strength concrete. Concrete specimens with 25%, 50%, 75%, and 100% ATCA replacing the NCA in conventional concrete were prepared for evaluating the performance of ATCA concrete. The investigators find that ATCA concrete has good workability, and the mechanical properties and long-term behavior (shrinkage and creep) of ATCA concrete with all replacement levels are superior to those of NCA concrete. The durability indices of ATCA concrete, such as the frost-resistant, chloride permeability, and resistance to carbonation, are better than those of NCA concrete. While the alkali activity and cracking sensitivity behavior of ATCA concrete seem to be decreased, nevertheless, the difference is not significant and can be neglected. The researchers demonstrate that all of the control indices of ATCA concrete meet the requirements of the current industry standards of China. Overall, ATCA can be used in concrete to minimize environmental problems and natural resources depletion.

Wastewater treatment and fouling control in an electro algae-activated sludge membrane bioreactor

The effect of addition of algae to activated sludge as active biomass in membrane bioreactors (MBRs) and electro-MBRs (e-MBRs) for wastewater remediation was examined in this study. The performances of Algae-Activated Sludge Membrane Bioreactor (AAS-MBR) and electro Algae-Activated Sludge Membrane Bioreactor (e-AAS-MBR) were compared to those observed in conventional MBR and e-MBR, which were previously reported and utilized activated sludge as biomass. The effect of application of electric field was also examined by the comparison of performances of e-AAS-MBR and AAS-MBR. Similar chemical oxygen demand (COD) reduction efficiencies of AAS-MBR, e-AAS-MBR, MBR, and e-MBR (98.35 ± 0.35%, 99.12 ± 0.08%, 97.70 ± 1.10%, and 98.10 ± 1.70%, respectively) were observed. The effect of the algae-activated sludge system was significantly higher in the nutrient removals. Ammoniacal nitrogen (NH₃-N) removal efficiencies of AAS-MBR and e-AAS-MBR were higher by 43.89% and 26.61% than in the conventional MBR and e-MBR, respectively. Phosphate phosphorous (PO₄^3--P) removals were also higher in AAS-MBR and e-AAS-MBR by 6.43% and 2.66% than those in conventional MBR and e-MBR. Membrane fouling rates in AAS-MBR and e-AAS-MBR were lower by 57.30% and 61.95% than in MBR and e-MBR, respectively. Lower concentrations of fouling substances were also observed in the reactors containing algae-activated sludge biomass. Results revealed that addition of algae improved nutrient removal and membrane fouling mitigation. The study also highlighted that the application of electric field in the e-AAS-MBR enhanced organic contaminants and nutrients removal, and fouling rate reduction.

Antifouling potential and microbial characterization of an electrochemical anaerobic membrane bioreactor utilizing membrane cathode and iron anode

Serious membrane fouling limits the application of anaerobic membrane bioreactors (AnMBRs) in sewage treatment. Herein, a novel electrochemical AnMBR (eAnMBR) was established by integrating electrocoagulation and a conductive membrane into an AnMBR. Compared with the traditional AnMBR, TP average removal rate increased by 24.97% and the membrane service cycle extended by 109.68% in the eAnMBR. Low extracellular polymeric substance concentration and large floc size were found in the mixed liquid of the eAnMBR due to the combined effect of coagulation and electric field, which induced a porous and hydrophilic cake layer, resulting in excellent water permeation capabilities. Additionally, the conductive membrane cathode effectively suppressed membrane fouling by the electrostatic repulsion and gas scouring. In the eAnMBR, the presence of an electric field and iron ions enriched the diversity of the microbial community, which may improve the adaptation of biochemical systems to environmental changes.

Electrochemical membrane bioreactors: State-of-the-art and future prospects

Integration of an electrochemical process with membrane bioreactor (MBR) has attracted considerable attention in the last decade for simultaneous improvement in pollutant removal and hydraulic performance of MBR. Electrochemical MBR (eMBR) with sacrificial anodes has been observed to achieve enhanced phosphorus (up to 40%) and micropollutant removal (5-60%). This is because direct anodic oxidation, indirect oxidation by reactive oxygen species and electrocoagulation can supplement the biological process. The application of an electric field can substantially reduce membrane fouling by 10% to 95% in the eMBR as compared to the conventional MBR. Sacrificial electrodes (e.g., iron or aluminium) have been reported to be more suitable for fouling mitigation than non-sacrificial electrodes (e.g., titanium). However, during prolonged operation, metal ions released from sacrificial electrodes can adversely affect microbial activity and could accumulate in activated sludge. Depending on the current density and electrode material (sacrificial or non- sacrificial), anodic oxidation, electrocoagulation, electrophoresis and/or electroosmosis mechanisms are responsible for suppressing membrane fouling propensity. This paper critically reviews the current status of the electrochemical MBR technology and presents a concise summary of eMBR configurations and electrode materials. Comparative removal of bulk organics, nutrients and micropollutants in the eMBR and conventional MBR is discussed, and performance governing factors are elucidated. Impacts of operating conditions such as current density on mixed liquor properties (e.g., floc size and zeta potential) and microbial activity are elucidated. The extent of membrane fouling mitigation along with associated mechanisms as well as energy consumption is explained and critically analysed. Future research directions are suggested to fast track the scalability of eMBR, which include but are not limited to electrode lifetime, development of self-cleaning conductive membranes, optimisation of operating parameters, removal of emerging micropollutants, accumulation of toxic metals in activated sludge, and degradation by-products and ecotoxicity.

In-situ membrane fouling control by electrooxidation and microbial community in membrane electro-bioreactor treating aquaculture seawater

Ammonia and nitrite in aquaculture recirculating seawater need to be strictly controlled to avoid deleterious effects on aquatic organisms. However, traditional biological approach can hardly meet the standard due to the short hydraulic retention time (HRT) and nitrite accumulation. A Membrane Electro-Bioreactor (MEBR) was developed for ammonia removal enhancement and in-situ electrochemical membrane fouling mitigation. The fouling mechanism was first found to proceed via the standard filtration model. The flux decrease was mainly caused by an internal pore clogging phenomenon. Membrane fouling resistance was enhanced by increasing anode potential from 0 to 1.4 V vs. SCE (Saturated Calomel Electrode). The ammonia removal rate in the MEBR was above 95% (HRT: 2 h, after day-13) and membrane fouling was mitigated that operation duration was extended by 71.4%. Higher total proportion of Proteobacteria, Bacteroidetes, Planctomycetes and Actinobacteria was obtained in the MEBR, suggesting higher nitrification and nitrogen removal potentials.

Membrane processes

This literature review provides a review for publications in 2018 and 2019 and includes information membrane processes findings for municipal and industrial applications. This review is a subsection of the annual Water Environment Federation literature review for Treatment Systems section. The following topics are covered in this literature review: industrial wastewater and membrane. Bioreactor (MBR) configuration, membrane fouling, design, reuse, nutrient removal, operation, anaerobic membrane systems, microconstituents removal, membrane technology advances, and modeling. Other sub-sections of the Treatment Systems section that might relate to this literature review include the following: Biological Fixed-Film Systems, Activated Sludge, and Other Aerobic Suspended Culture Processes, Anaerobic Processes, and Water Reclamation and Reuse. This publication might also have related information on membrane processes: Industrial Wastes, Hazardous Wastes, and Fate and Effects of Pollutants.

Impacts of long-term electric field applied on the membrane fouling mitigation and shifts of microbial communities in EMBR for treating phenol wastewater

The membrane antifouling and shifts of microbial communities of long-term electric field applied in MBR (EMBR) for treating phenol wastewater was systematically investigated. The increased voltage increased the phenol degradation rate and slowed down the TMP increase rate in EMBR (G1-G4: 1.65 × 10^-3-8.40 × 10^-4 Mpa/d), indicated the enhancement of phenol treatment and mitigation of membrane fouling. Decrease of protein (PN)/polysaccharide (PS) in EPS increased the negative charge and decreased the hydrophobicity of sludge, thus abated its adsorption on membrane surface. The decrease of AHLs concentration attributed to the electrolysis of AHLs by the electro-generated H₂O₂. Besides, the AHLs had significantly negative correlation with QQ bacteria Rhodococcus and Stenotrophomonas enrichment and positive correlation with QS bacteria Aeromonas decrease in EMBRs, suggesting that coupling effects of voltage and QQ bacteria degraded AHLs, thus decreased EPS content which was positively correlated with AHLs concentration. Biopolymer-degrading genera (Clostridium sensu strict etc.) increased in EMBR and on membrane surface, while biofilm-forming genera (Pseudomonas etc.) decreased on membrane surface. These resulted in EPS content decrease and membrane antifouling.

The reverse electrodialysis driven electrochemical process assisted by anodic photocatalysis for hydrogen peroxide production

A novel system combined with photocatalytic fuel cell and electrochemical system assisted by reverse electrodialysis (PREC) is proposed for H₂O₂ production and electricity generation. Results demonstrated the H₂O₂ concentration increased gradually with time and reached around 940 mg/L at 24 h. The optimum air flow rate was 15 L/min. The current efficiency was 31.3%. The maximum short-circuit current density, maximum open-circuit voltage and maximum power density were 0.95 mA/cm², 1.52 V and 68 W/m². The salinity-driven potential, created with the five pairs of the HC and LC cells in the PREC, was calculated to be 0.72 V. Additionally, the energy efficiency (η_E) was 40.5%. The integrated system is confirmed to be serviced as an efficient technology for H₂O₂ electro-genneration and salinity-gradient energy utilization simultaneously.

Are pharmaceuticals removal and membrane fouling in electromembrane bioreactor affected by current density?

Pharmaceutical active compounds (PhACs) have been detected at significant concentrations in various natural and artificial aquatic environments. In this study, electro membrane bioreactor (eMBR) technology was used to treat simulated municipal wastewater containing widely-used pharmaceuticals namely amoxicillin (AMX), diclofenac (DCF) and carbamazepine (CBZ). The effects of varying current density on the removal of PhACs (AMX, DCF and CBZ) and conventional pollutants (chemical oxygen demand (COD), dissolved organic carbon (DOC), humic substances, ammonia nitrogen (NH₄-N), nitrate nitrogen (NO₃-N) and orthophosphate (PO₄-P) species) were examined. High COD and DOC removal efficiencies (~100%) were obtained in all the experimental runs regardless of applied current density. In contrast, enhanced removal efficiencies for AMX, DCF and CBZ were achieved at high current densities. Membrane fouling rate in eMBR with respect to conventional MBR was reduced by 24, 44 and 45% at current densities of 0.3, 0.5 and 1.15 mA/cm², respectively. The mechanism for pharmaceutical removal in this study proceeded by: (1) charge neutralization between negatively-charged pharmaceutical compounds and positive electro-generated aluminium coagulants to form larger particles and (2) size exclusion by membrane filtration.