Macroalgal biomass subcritical hydrolysates for the production of polyhydroxyalkanoate (PHA) by Haloferax mediterranei

Application of PHA surface binding proteins of alkali-tolerant Bacillus as surfactants

Amphiphilic protein has lipophilic and hydrophilic domains, displaying the potential for development as a biosurfactant. The polyhydroxyalkanoate (PHA) surface binding protein derived from Bacillus is a type of protein that has not been studied for its emulsifying properties. In this study, PHA granule-associated protein (PhaP), PHA regulatory protein (PhaQ), and PHA synthase subunit (PhaR) derived from an alkali-tolerant PHA-producing Bacillus cereus HBL-AI were found and heterologously expressed in E. coli and purified to investigate their application as biosurfactants. It showed that the emulsification ability and stability of three amphiphilic proteins were higher than those of widely used chemical surfactants in diesel oil, vegetable oil, and lubricating oil. In particular, the PhaQ protein studied for the first time can form a stable emulsion layer in vegetable oil at a lower concentration (50 µg/mL), which greatly reduced the amount of protein used in emulsification. This clearly demonstrated that the PHA-binding protein of HBL-AI can be well applied as an environmentally friendly biosurfactants.

Traditional Chinese medicine residue enzymatic hydrolysates for production of polyhydroxyalkanoate by newly isolated Bacillus altitudinis

Traditional Chinese medicine residue (TCMR) was utilized as an inexpensive carbon source for the production of poly(3-hydroxybutyrate) (PHB) using the newly isolated Bacillus altitudinis HBU-SI7. The results showed that Yu Ping Feng TCMR could be directly hydrolysed by cellulase to obtain a high proportion of glucose (99 % of total sugar) without pretreatment, achieving an enzymatic hydrolysis rate of up to 89.2 %. B. altitudinis could grow and produce PHB when using enzymatically hydrolysed TCMR in a 5-L fermenter. After 20 h of fermentation, the maximum concentration of PHB was 11.2 g/L, and the highest cell dry weight (CDW) was 15.4 g/L, with 72.7 % of the PHB fraction in CDW. Moreover, this strain could utilize enzymatic hydrolysates from various herbal formulas to produce high levels of PHB. This novel approach aims to accumulate PHB from TCMR hydrolysates, offering an effective and environmentally friendly method to reduce production costs and achieve mass production.

Polyhydroxyalkanoates for Sustainable Aquaculture: A Review of Recent Advancements, Challenges, and Future Directions

Polyhydroxyalkanoates (PHA) are biodegradable biopolymers produced by prokaryotic microbes, which, at the same time, can be applied as single-cell proteins (SCPs), growing on renewable waste-derived substrates. These PHA polymers have gained increasing attention as a sustainable alternative to conventional plastics. One promising application of PHA and PHA-rich SCPs lies within the aquaculture food industry, where they hold potential as feed additives, biocontrol agents against diseases, and immunostimulants. Nevertheless, the cost of PHA production and application remains high, partly due to expensive substrates for cultivating PHA-accumulating SCPs, costly sterilization, energy-intensive SCPs harvesting techniques, and toxic PHA extraction and purification processes. This review summarizes the current state of PHA production and its application in aquaculture. The structure and classification of PHA, microbial sources, cultivation substrates, biosynthesis pathways, and the production challenges and solutions are discussed. Next, the potential of PHA application in aquaculture is explored, focusing on aquaculture challenges, common and innovative PHA-integrated farming practices, and PHA mechanisms in inhibiting pathogens, enhancing the immune system, and improving growth and gut health of various aquatic species. Finally, challenges and future research needs for PHA production and application in aquaculture are identified. Overall, this review paper provides a comprehensive overview of the potential of PHA in aquaculture and highlights the need for further research in this area.

Feasibility of bioplastic production using micro- and macroalgae- A review

Plastic disposal and their degraded products in the environment are global concern due to its adverse effects and persistence in nature. To overcome plastic pollution and its impacts on environment, a sustainable bioplastic production using renewable feedstock's, such as algae, are envisioned. In this review, the production of polymer precursors such as polylactic acid, polyhydroxybutyrates, polyhydroxyalkanoates, agar, carrageenan and alginate from microalgae and macroalgae through direct conversion and fermentation routes are summarized and discussed. The direct conversion of algal biopolymers without any bioprocess (whole algal biomass used emphasizing zero waste discharge concept) favours economic feasibility. Whereas indirect method uses conversion of algal polymers to monomers after pretreatment followed by bioplastic precursor production by fermentation are emphasized. This review paper also outlines the current state of technological developments in the field of algae-based bioplastic, both in industry and in research, and highlights the creation of novel solutions for green bioplastic production employing algal polymers. Finally, the cost economics of the bioplastic production using algal biopolymers are clearly mentioned with future directions of next level bioplastic production. In this review study, the cost estimation was given at laboratory level bioplastic production using casting methods. Further development of bioplastics at pilot scale level may give clear economic feasibility of production at industry. Here, in this review, we emphasized the overview of algal biopolymers for different bioplastic product development and its economic value and also current industries involved in bioplastic production.

Simultaneous production of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from recovered volatile fatty acid with treatment of leachate by Pilot-Scale Mechanical Vapor Recompression

Serious global problems faced due to many petroleum-based materials in the last century, which is called the plastic age, constitute the main motivation of this research. Considering wastewater treatment from this perspective, both the recovery of organic acids from wastewater and their conversion into bioplastics are extremely important in terms of reducing petroleum dependency. In this study, while the treatment of landfill leachate was provided with biological process integrated into Mechanical Vapor Recompression (MVR), simultaneously PHBV production was carried out with 84.9% recovered VFA as carbon source. The effects of C/N/P ratio and feeding regime on PHBV storage were investigated by Cupriavidus necator. PHBV storage of 96% (g PHBV/g DCW) was maximized by 2-stage feeding and nitrogen restriction. The ratio of 3HV to 3HB of PHBV was 45%. In addition, extracted PHBV was compared with standard PHA in terms of thermal and chemical properties with FTIR, XRD, TGA and DSC analyses.

Production of polyhydroxyalkanoates from hydrolysed rapeseed meal by Haloferax mediterranei

Rapeseed meal (RSM) hydrolysate is a potential low-cost feedstock for the production of polyhydroxyalkanoates (PHAs) by the archaea, Haloferax mediterranei. Acidic and enzymatic hydrolysis were carried out to compare effectiveness. Enzymatic hydrolysis is more effective than acidic hydrolysis for fermentation substrate leading to increased PHA productivity. H. mediterranei didn't grow or produce PHA when acid hydrolysed RSM medium was present in proportions greater than 25% (vol.), potentially due to the effect of inhibitors such as furfural, hydroxymethylfurfural (HMF), etc. However, H. mediterranei was able to grow and produce PHA when using enzymatically hydrolysed RSM medium. The maximum PHA concentration of 0.512 g/L was found at 75% (vol.) in enzymatic RSM hydrolysate medium. The biopolymer obtained had improved thermal and mechanical properties compared to PHB homopolymer. RSM's potential as a low-cost alternative feedstock for improved PHA production under non-sterile conditions was successfully demonstrated, and its usage should be further explored.

One-pot treatment of Saccharophagus degradans for polyhydroxyalkanoate production from brown seaweed

The conventional production of polyhydroxyalkanoate (PHA) from waste biomass requires a pretreatment step (acid or alkali) for reducing sugar extraction, followed by bacterial fermentation. This study aims to find a greener approach for PHA production from brown seaweed. Saccharophagus degradans can be a promising bacterium for simultaneous reducing sugar and PHA production, bypassing the need for a pretreatment step. Cell retention cultures of S. degradans in membrane bioreactor resulted in approximately 4- and 3-fold higher PHA concentrations than batch cultures using glucose and seaweed as carbon sources, respectively. X-ray diffraction, Fourier transform infrared spectroscopy, and nuclear magnetic resonance results revealed identical peaks for the resulting PHA and standard poly(3-hydroxybutyrate). The developed one step process using cell retention culture of S. degradans could be a beneficial process for scalable and sustainable PHA production.

Biosynthesis of poly(3-hydroxybutyrate) by N,N-dimethylformamide degrading strain Paracoccus sp. PXZ: A strategy for resource utilization of pollutants

N,N-dimethylformamide is a toxic chemical solvent, which widely exists in industrial wastewater. Nevertheless, the relevant methods merely achieved non-hazardous treatment of N,N-dimethylformamide. In this study, one efficient N,N-dimethylformamide degrading strain was isolated and developed for pollutant removal coupling with poly(3-hydroxybutyrate) (PHB) accumulation. The functional host was characterized as Paracoccus sp. PXZ, which could consume N,N-dimethylformamide as the nutrient substrate for cell reproduction. Whole-genome sequencing analysis confirmed that PXZ simultaneously possesses the essential genes for poly(3-hydroxybutyrate) synthesis. Subsequently, the approaches of nutrient supplementation and various physicochemical variables to strengthen poly(3-hydroxybutyrate) production were investigated. The optimal biopolymer concentration was 2.74 g·L^-1 with a poly(3-hydroxybutyrate) proportion of 61%, showing a yield of 0.29 g-PHB·g^-1-fructose. Furthermore, N,N-dimethylformamide served as the special nitrogen matter that could realize a similar poly(3-hydroxybutyrate) accumulation. This study provided a fermentation technology coupling with N,N-dimethylformamide degradation, offering a new strategy for resource utilization of specific pollutants and wastewater treatment.

Biopolymer production from biomass produced by Nordic microalgae grown in wastewater

Biomass from four different Nordic microalgal species, grown in BG-11 medium or synthetic wastewater (SWW), was explored as inexpensive carbohydrate-rich feedstock for polyhydroxybutyrate (PHB) production via microbial fermentation. Thermochemical pre-treatment (acid treatment followed by autoclavation) with 2% hydrochloric acid or 1% sulphuric acid (v/v) was used to maximize sugar yield prior to fermentation. Pre-treatment resulted in ∼5-fold higher sugar yield compared to the control. The sugar-rich hydrolysate was used as carbon source for the PHB-producing extremophilic bacterium Halomonas halophila. Maximal PHB production was achieved with hydrolysate of Chlorococcum sp. (MC-1) grown on BG-11 medium (0.27 ± 0.05 g PHB/ g DW), followed by hydrolysate derived from Desmodesmus sp. (RUC-2) grown on SWW (0.24 ± 0.05 g PHB/ g DW). Nordic microalgal biomass grown on wastewater therefore can be used as cheap feedstock for sustainable bioplastic production. This research highlights the potential of Nordic microalgae to develop a biobased economy.

Valorization of agro-industrial wastes into polyhydroxyalkanoates-rich single-cell proteins to enable a circular waste-to-feed economy

Recovering and converting carbon and nutrients from waste streams into healthy single-cell proteins (SCPs) can be an effective strategy to address costly waste management and support the increasing animal feed demand for the global food supply. Recently, SCPs rich in polyhydroxybutyrate (PHB) have been identified as an effective biocontrol healthy feed to replace conventional antibiotics-supplemented aquaculture feed. PHB, an intercellular polymer of short-chain-length (SCL) hydroxy-fatty acids, is a common type of polyhydroxyalkanoates (PHA) that can be microbially produced from various organics, including agro-industrial wastes. The complex chemical properties of agro-industrial wastes might produce SCPs containing PHA with SCL and/or medium chain-length (MCL) hydroxy-fatty acids. However, the effects of MCL-PHA-containing SCPs on aqua species' health and disease-fighting ability remains poorly understood. This study investigated the feasibility of producing various PHA-containing SCPs from renewable agro-industrial wastes/wastewaters, the effectiveness of SCL- and MCL-PHA as biocontrol agents, and the effects of these PHA-rich SCPs on the growth and disease resistance of an aquaculture animal model, brine shrimp Artemia. Zobellella denitrificans ZD1 and Pseudomonas oleovorans were able to grow on different pure substrates and agro-industrial wastes/wastewaters to produce various SCL- and/or MCL-PHA-rich SCPs. Low doses of MCL-fatty acids (i.e., PHA intermediates) efficiently suppressed the growth of aquaculture pathogens. Moreover, MCL-PHA-rich SCPs served as great food/energy sources for Artemia and improved Artemia's ability to fight pathogens. This study offers a win-win approach to address the challenges of wastes/wastewater management and feed supply faced by the aquaculture industry.

Process Development of Polyhydroxyalkanoates Production by Halophiles Valorising Food Waste

Polyhydroxyalkanoates (PHA) is an emerging biodegradable plastic family that can replace a broad spectrum of conventional thermoplastics and is promising in the sustainable process development and valorization of organic waste. This study established a novel production system of PHA from food waste through halophilic microbial fermentation with spent medium recycling. The essential processing parameters for batch cultivation of Haloferax mediterranei were optimized for food waste substrate (a 40 g/L loading and 2.5 vvm of aeration), which achieved a yield of 0.3 g PHA/g COD consumed. A batch bioreactor system was developed, which produced 7.0 ± 0.7 g/L cell dry mass and 4.5 ± 0.2 g/L PHA with a 20% dissolved oxygen (DO) level. A DO above 50% saturation resulted in faster cell growth and similar cell mass production but 25% less PHA production. The spent saline medium, treated with H2O2 and rotary evaporation, was successfully reused for four consecutive batches and provided consistent PHA concentrations and product qualities.

Exploitation of wasted bread as substrate for polyhydroxyalkanoates production through the use of Haloferax mediterranei and seawater

The use of the halophile microorganism Haloferax mediterranei, able to synthesize poly(hydroxybutyrate-hydroxyvalerate) (PHBV), is considered as a promising tool for the industrial production of bioplastic through bioprocessing. A consistent supplementation of the growth substrate in carbohydrates and minerals is overall necessary to allow its PHBV production. In this work, wasted bread was used as substrate for bioplastic production by microbial fermentation. Instead of the consistent and expensive minerals supplement required for Hfx. mediterranei DSM1411 growth, microfiltered seawater was added to the wasted bread-derived substrate. The suitable ratio of wasted bread homogenate and seawater, corresponding to 40:60, was selected. The addition of proteases and amylase to the bread homogenate promoted the microbial growth but it did not correspond to the increase of bioplastic production by the microorganism, that reach, under the experimental conditions, 1.53 g/L. An extraction procedure of the PHBV from cells, based on repeated washing with water, followed or not by a purification through ethanol precipitation, was applied instead of the conventional extraction with chloroform. Yield of PHBV obtained using the different extraction methods were 21.6 ± 3.6 (standard extraction/purification procedure with CHCl3:H2O mixture), 24.8 ± 3.0 (water-based extraction), and 19.8 ± 3.3 mg PHAs/g of wasted bread (water-based extraction followed by ethanol purification). Slightly higher hydroxyvalerate content (12.95 vs 10.78%, w/w) was found in PHBV obtained through the water-based extraction compared to the conventional one, moreover, the former was characterized by purity of 100% (w/w). Results demonstrated the suitability of wasted bread, supplemented with seawater, to be used as substrate for bioplastic production through fermentation. Results moreover demonstrated that a solvent-free extraction, exclusively based on osmotic shock, could be used to recover the bioplastic from cells.

In silico identification of bacterial seaweed-degrading bioplastic producers

There is an urgent need to replace petroleum-based plastic with bio-based and biodegradable alternatives. Polyhydroxyalkanoates (PHAs) are attractive prospective replacements that exhibit desirable mechanical properties and are recyclable and biodegradable in terrestrial and marine environments. However, the production costs today still limit the economic sustainability of the PHA industry. Seaweed cultivation represents an opportunity for carbon capture, while also supplying a sustainable photosynthetic feedstock for PHA production. We mined existing gene and protein databases to identify bacteria able to grow and produce PHAs using seaweed-derived carbohydrates as substrates. There were no significant relationships between the genes involved in the deconstruction of algae polysaccharides and PHA production, with poor to negative correlations and diffused clustering suggesting evolutionary compartmentalism. We identified 2 987 bacterial candidates spanning 40 taxonomic families predominantly within Alphaproteobacteria, Gammaproteobacteria and Burkholderiales with enriched seaweed-degrading capacity that also harbour PHA synthesis potential. These included highly promising candidates with specialist and generalist specificities, including Alteromonas, Aquisphaera, Azotobacter, Bacillus, Caulobacter, Cellvibrionaceae, Duganella, Janthinobacterium, Massilia, Oxalobacteraceae, Parvularcula, Pirellulaceae, Pseudomonas, Rhizobacter, Rhodanobacter, Simiduia, Sphingobium, Sphingomonadaceae, Sphingomonas, Stieleria, Vibrio and Xanthomonas. In this enriched subset, the family-level densities of genes targeting green macroalgae polysaccharides were considerably higher (n=231.6±68.5) than enzymes targeting brown (n=65.34±13.12) and red (n=30.5±10.72) polysaccharides. Within these organisms, an abundance of FabG genes was observed, suggesting that the fatty acid de novo synthesis pathway supplies (R)-3-hydroxyacyl-CoA or 3-hydroxybutyryl-CoA from core metabolic processes and is the predominant mechanism of PHA production in these organisms. Our results facilitate extending seaweed biomass valorization in the context of consolidated biorefining for the production of bioplastics.

Agar Biopolymer Films for Biodegradable Packaging: A Reference Dataset for Exploring the Limits of Mechanical Performance

This article focuses on agar biopolymer films that offer promise for developing biodegradable packaging, an important solution for reducing plastics pollution. At present there is a lack of data on the mechanical performance of agar biopolymer films using a simple plasticizer. This study takes a Design of Experiments approach to analyze how agar-glycerin biopolymer films perform across a range of ingredients concentrations in terms of their strength, elasticity, and ductility. Our results demonstrate that by systematically varying the quantity of agar and glycerin, tensile properties can be achieved that are comparable to agar-based materials with more complex formulations. Not only does our study significantly broaden the amount of data available on the range of mechanical performance that can be achieved with simple agar biopolymer films, but the data can also be used to guide further optimization efforts that start with a basic formulation that performs well on certain property dimensions. We also find that select formulations have similar tensile properties to thermoplastic starch (TPS), acrylonitrile butadiene styrene (ABS), and polypropylene (PP), indicating potential suitability for select packaging applications. We use our experimental dataset to train a neural network regression model that predicts the Young's modulus, ultimate tensile strength, and elongation at break of agar biopolymer films given their composition. Our findings support the development of further data-driven design and fabrication workflows.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

Turning mannitol-rich agricultural waste to poly(3-hydroxybutyrate) with Cobetia amphilecti fermentation and recovery with methyl levulinate as a green solvent

The present study explored the use of mannitol and mannitol-rich agro-industrial wastes as substrates for PHB production by Cobetia amphilecti isolated from the green Ulva sp. seaweed. Cultivation of C. amphilecti on mannitol, celery, and olive leaves (OLs) waste led to 4.20, 6.00, and 5.16 g L^-1 of cell dry mass (CDM), 76.3, 25.5, and 12.0% of PHB content in CDM and 3.2, 1.53, and 0.62 g L^-1 of PHB concentration, respectively; which suggested that they can be exploited as carbon substrates for the production of PHB. Extraction of PHB from C. amphilecti cultures by solubilization in the green solvent methyl levulinate (ML) (2% w/w, 140 °C, 1 h) indicated that the recovery yield and purity of PHB are above 97 and 90% w/w, respectively. The use of ML could be an attractive method for the recovery of PHB when safe and non-toxic solvents are required.

Polyhydroxyalkanoates, the bioplastics of microbial origin: Properties, biochemical synthesis, and their applications

The rising plastic pollution deteriorates the environment significantly as these petroleum-based plastics are not biodegradable, and their production requires natural fuels (energy source) and other resources. Polyhydroxyalkanoates (PHAs) are bioplastic and a sustainable and eco-friendly alternative to synthetic plastics. PHAs can be entirely synthesized using various microorganisms such as bacteria, algae, and fungi. These value-added biopolymers show promising properties such as enhanced biodegradability, biocompatibility, and other chemo-mechanical properties. Further, it has been established that the properties of PHA polymers depend on the substrates and chemical composition (monomer unit) of these polymers. PHAs hold great potential as an alternative to petroleum-based polymers, and further research for economic production and utilization of these biopolymers is required. The review describes the synthesis mechanism and different properties of microbially synthesized PHAs for various applications. The classification of PHAs and the multiple techniques necessary for their detection and evaluation have been discussed. In addition, the synthesis mechanism involving the genetic regulation of these biopolymers in various microbial groups has been described. This review provides information on various commercially available PHAs and their application in multiple sectors. The industrial production of these microbially synthesized polymers and the different extraction methods have been reviewed in detail. Furthermore, the review provides an insight into the potential applications of this biopolymer in environmental, industrial, and biomedical applications.

Metagenome-Assembled Genomes From Pyropia haitanensis Microbiome Provide Insights Into the Potential Metabolic Functions to the Seaweed

Pyropia is an economically important edible red alga worldwide. The aquaculture industry and Pyropia production have grown considerably in recent decades. Microbial communities inhabit the algal surface and produce a variety of compounds that can influence host adaptation. Previous studies on the Pyropia microbiome were focused on the microbial components or the function of specific microbial lineages, which frequently exclude metabolic information and contained only a small fraction of the overall community. Here, we performed a genome-centric analysis to study the metabolic potential of the Pyropia haitanensis phycosphere bacteria. We reconstructed 202 unique metagenome-assembled genomes (MAGs) comprising all major taxa present within the P. haitanensis microbiome. The addition of MAGs to the genome tree containing all publicly available Pyropia-associated microorganisms increased the phylogenetic diversity by 50% within the bacteria. Metabolic reconstruction of the MAGs showed functional redundancy across taxa for pathways including nitrate reduction, taurine metabolism, organophosphorus, and 1-aminocyclopropane-1-carboxylate degradation, auxin, and vitamin B12 synthesis. Some microbial functions, such as auxin and vitamin B12 synthesis, that were previously assigned to a few Pyropia-associated microorganisms were distributed across the diverse epiphytic taxa. Other metabolic pathways, such as ammonia oxidation, denitrification, and sulfide oxidation, were confined to specific keystone taxa.

Metabolic engineering for valorization of macroalgae biomass

Marine macroalgae have huge potential as feedstocks for production of a wide spectrum of chemicals used in biofuels, biomaterials, and bioactive compounds. Harnessing macroalgae in these ways could promote wellbeing for people while mitigating climate change and environmental destruction linked to use of fossil fuels. Microorganisms play pivotal roles in converting macroalgae into valuable products, and metabolic engineering technologies have been developed to extend their native capabilities. This review showcases current achievements in engineering the metabolisms of various microbial chassis to convert red, green, and brown macroalgae into bioproducts. Unique features of macroalgae, such as seasonal variation in carbohydrate content and salinity, provide the next challenges to advancing macroalgae-based biorefineries. Three emerging engineering strategies are discussed here: (1) designing dynamic control of metabolic pathways, (2) engineering strains of halophilic (salt-tolerant) microbes, and (3) developing microbial consortia for conversion. This review illuminates opportunities for future research communities by elucidating current approaches to engineering microbes so they can become cell factories for the utilization of macroalgae feedstocks.

Algal biopolymers as sustainable resources for a net-zero carbon bioeconomy

The era for eco-friendly polymers was ushered by the marine plastic menace and with the discovery of emerging pollutants such as micro-, nano-plastics, and plastic leachates from fossil fuel-based polymers. This review investigates algae-derived natural, carbon neutral polysaccharides and polyesters, their structure, biosynthetic mechanisms, biopolymers and biocomposites production process, followed by biodegradability of the polymers. The review proposes acceleration of research in this promising area to address the need for eco-friendly polymers and to increase the cost-effectiveness of algal biorefineries by coupling biofuel, high-value products, and biopolymer production using waste and wastewater-grown algal biomass. Such a strategy improves overall sustainability by lowering costs and carbon emissions in algal biorefineries, eventually contributing towards the much touted circular, net-zero carbon future economies. Finally, this review analyses the evolution of citation networks, which in turn highlight the emergence of a new frontier of sustainable polymers from algae.

Halophyte biorefinery for polyhydroxyalkanoates production from Ulva sp. Hydrolysate with Haloferax mediterranei in pneumatically agitated bioreactors and ultrasound harvesting

The present study tested the outdoor cultivation of Haloferax mediterranei for PHA production from green macroalgae Ulva sp. in pneumatically agitated bioreactors and applied ultrasonic separation for enhanced settling of archaeal cells. Scaled-up cultivation (40 L) yielded maximum biomass productivity of 50.1 ± 0.11 mg·L^-1·h^-1 with a PHA productivity of 27 ± 0.01 mg·L^-1·h^-1 and conversion yield of 0.107 g PHA per gram Ulva_DW. The maximum mass fraction of PHA achieved in biomass was calculated to be 56% w/w. Ultrasonic harvesting of Hfx. mediterranei cells approached 30% removal at energy inputs around 7.8 kWh·m^-3, and indicated no significant aggregation enhancement by Ca²⁺ addition. Molecular weight analysis showed an increase in Polydispersity Index (PDI) when the corresponding air velocities were increased suggesting that the polymer was more homogeneous at lower mixing velocities. The current study demonstrated scalable processes for PHA production using Ulva sp. feedstock providing new technologies for halophilic biorefinery.

Techno-Economic Analysis on an Industrial-Scale Production System of Polyhydroxyalkanoates (PHA) from Cheese By-Products by Halophiles

Polyhydroxyalkanoates (PHA) are a family of biodegradable plastics used as an ecofriendly alternative for conventional plastics in various applications. In this study, an industrial-scale PHA production system was designed and analyzed for the material flows and economics with the use of SuperPro Designer. Haloferax mediterranei was utilized to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Byproduct streams from a local cheese plant, with an input of 168.7 metric ton/day (MT/day) lactose, were used as the feedstock. Three scenarios with different processes for the treatments of used enzyme and spent medium were investigated and the major factors that influence the overall economics were identified. The simulated system produces 9700 MT/year PHBV with a yield of 0.2 g PHBV/g lactose and an overall process efficiency of 87%. The breakeven price was found to be more sensitive to the lactose price than enzyme price. The scenario with enzyme reuse and spent medium recycling achieved the lowest breakeven price among others, which can be less than 4 $/kg PHA based on the delactosed permeate (DLP) unit price. The study suggests utilizing dairy derived feedstocks has the potential to make PHA competitive in the bioplastic market, which could be beneficial to both dairy and bioplastic industries.

Efficient poly(3-hydroxybutyrate-co-lactate) production from corn stover hydrolysate by metabolically engineered Escherichia coli

Poly(3-hydroxybutyrate-co-lactate)[P(3HB-co-LA)], is a biodegradable and biocompatible bioplastic, and the monomeric composition of the copolymer plays an important role in affecting its mechanical properties. Corn stover hydrolysate (CSH), the waste by-product in agriculture, has been considered as an important carbon source for value-added biochemical production. Therefore, the effect of CSH on P(3HB-co-LA) biosynthesis was investigated in this study. Taking CSH as the carbon source, the lactate (LA) fraction in the copolymer reached 7.1 mol% by the engineered stain. The results of shake flask fermentation demonstrated that reducing the activity of electron transport system resulted in a higher LA fraction. Furthermore, we replaced the promoter of the key gene pct_th with ldhA gene promoter, so that the expression of pct_th gene could be dynamically modulated as well as the lactic acid content changed. This study suggests that CSH is a promising carbon source for the production of biodegradable P(3HB-co-LA).

High cell density culture of Paracoccus sp. LL1 in membrane bioreactor for enhanced co-production of polyhydroxyalkanoates and astaxanthin

A cell retention culture of Paracoccus sp. LL1 was performed in a membrane bioreactor equipped with an internal ceramic filter module to reach high cell density and thus enhance the co-production of polyhydroxyalkanoates (PHA) and astaxanthin as growth-associated products. Cell retention culture results showed that PHA accumulation increased with increasing dry cell weight (DCW), giving rise to a maximum of 113 ± 0.92 g/L of DCW with 43.9 ± 0.91 g/L of PHA (38.8% of DCW) at 48 h. A significant increase in both intracellular and extracellular astaxanthin concentrations was also recorded during fermentation process achieving a maximum of 8.51 ± 0.20 and 10.2 ± 0.24 mg/L, respectively. Amounts of PHA and total astaxanthin produced by cell retention culture were 6.29 and 19.7-folds higher, respectively, than those recorded under batch cultivation. PHA and total astaxanthin productivities by cell retention culture also increased up to 0.914 g/L/h and 0.781 mg/L/h, respectively, which were 3.54 and 11.1-folds higher than those of batch culture. Based on gas chromatography, Fourier transform infrared spectroscopy, and ¹H nuclear magnetic resonance spectroscopy, the extracted PHA was identified as a copolymer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with a 3-hydroxyvalerate content of 3.78 mol%.

Established and Emerging Producers of PHA: Redefining the Possibility

The polyhydroxyalkanoate was discovered almost around a century ago. Still, all the efforts to replace the traditional non-biodegradable plastic with much more environmentally friendly alternative are not enough. While the petroleum-based plastic is like a parasite, taking over the planet rapidly and without any feasible cure, its perennial presence has made the ocean a floating island of life-threatening debris and has flooded the landfills with toxic towering mountains. It demands for an immediate solution; most resembling answer would be the polyhydroxyalkanoates. The production cost is yet one of the significant challenges that various corporate is facing to replace the petroleum-based plastic. To deal with the economic constrain better strain, better practices, and a better market can be adopted for superior results. It demands for systems for polyhydroxyalkanoate production namely bacteria, yeast, microalgae, and transgenic plants. Solely strains affect more than 40% of overall production cost, playing a significant role in both upstream and downstream processes. The highly modifiable nature of the biopolymer provides the opportunity to replace the petroleum plastic in almost all sectors from food packaging to medical industry. The review will highlight the recent advancements and techno-economic analysis of current commercial models of polyhydroxyalkanoate production. Bio-compatibility and the biodegradability perks to be utilized highly efficient in the medical applications gives ample reason to tilt the scale in the favor of the polyhydroxyalkanoate as the new conventional and sustainable plastic.

A critical review on production of biopolymers from algae biomass and their applications

Algae is abundantly present in our ecosystems and can be easily extracted and used for production of biopolymers. Algae does not produce any anthropogenic, harmful effects, has a good growth rate, and cultivable in wastewater. This literature elucidates the potential of algae biomass by comparing various seaweed and microalgae strains. The routes for biopolymer production were portrayed and their novel methods of isolation such as microwave assisted, ultrasound assisted, and subcritical water assisted extraction are discussed in detail. These novel methods are observed to be highly efficient compared to conventional solvent extraction, with the microwave assisted and ultrasound assisted processes yielding 33% and 5% more biopolymer respectively than the conventional method. Biopolymers are used in variety of applications such as environmental remediation, adsorbent and antioxidant. Biopolymer is shown to be highly effective in the removal of potentially toxic elements and is seen to extract more than 40 mg PTE/g biopolymer.

Polyhydroxyalkanoates and biochar from green macroalgal Ulva sp. biomass subcritical hydrolysates: Process optimization and a priori economic and greenhouse emissions break-even analysis

Although macroalgae biomass is an emerging sustainable feedstock for biorefineries, the optimum process parameters for their hydrolysis and fermentation are still not known. In the present study, the simultaneous production of polyhydroxyalkanoates (PHA) and biochar from green macroalgae Ulva sp. is examined, applying subcritical water hydrolysis and Haloferax mediterranei fermentation. First, the effects of temperature, treatment time, salinity, and solid load on the biomass and PHA productivity were optimized following the Taguchi method. Hydrolysis at 170 °C, 20 min residence time, 38 g L^-1 salinity with a seaweed solid load of 5% led to the maximum PHA yield of 0.104 g g^-1Ulva and a biochar yield of 0.194 ± 1.23 g g^-1Ulva. Second, the effect of different initial culture densities on the biomass and PHA productivity was studied. An initial culture density of 50 g L^-1 led to the maximum volumetric PHA productivity of 0.024 ± 0.002 g L^-1 h^-1 with a maximum PHA content of 49.38 ± 0.3% w/w Sensitivity analysis shows that within 90% confidence, the annual PHA production from Ulva sp. is 148.14 g PHA m^-2 year^-1 with an annual biochar production of 42.6 g m^-2 year^-1. Priori economic and greenhouse gas break-even analyses of the process were done to estimate annual revenues and allowable greenhouse gas emissions. The study illustrates that PHA production from seaweed hydrolysate using extreme halophiles coupled to biochar production could become a benign and promising step in a marine biorefinery.

Marine bacteria associated with the green seaweed Ulva sp. for the production of polyhydroxyalkanoates

This work aimed to isolate a series of bacterial strains associated with the green seaweed Ulva sp. and evaluate their capability to manufacture PHA. The effect of the type of supplemented sugars found to be in macroalgae, on the growth and PHA productivity of the strains was studied. Analysis of the 16S rRNA gene sequence of the isolated strains revealed that the PHA-producing bacteria were phylogenetically related to the genus Cobetia, Bacillus, Pseudoaltermonas and Sulfitobacter, which showed high PHA contents among the isolates. The highest PHA content was observed in the case of Cobetia strain, with up to 61% w/w in the presence of mannitol and 12% w/w on Ulva sp. acid hydrolysate as a substrate.

Waste biorefinery towards a sustainable circular bioeconomy: a solution to global issues

Global issues such as environmental problems and food security are currently of concern to all of us. Circular bioeconomy is a promising approach towards resolving these global issues. The production of bioenergy and biomaterials can sustain the energy-environment nexus as well as substitute the devoid of petroleum as the production feedstock, thereby contributing to a cleaner and low carbon environment. In addition, assimilation of waste into bioprocesses for the production of useful products and metabolites lead towards a sustainable circular bioeconomy. This review aims to highlight the waste biorefinery as a sustainable bio-based circular economy, and, therefore, promoting a greener environment. Several case studies on the bioprocesses utilising waste for biopolymers and bio-lipids production as well as bioprocesses incorporated with wastewater treatment are well discussed. The strategy of waste biorefinery integrated with circular bioeconomy in the perspectives of unravelling the global issues can help to tackle carbon management and greenhouse gas emissions. A waste biorefinery-circular bioeconomy strategy represents a low carbon economy by reducing greenhouse gases footprint, and holds great prospects for a sustainable and greener world.

Polyhydroxyalkanoates from extremophiles: A review

Polyhydroxyalkanoates (PHAs) are group monomers/heteropolymers that are biodegradable and widely used in biomedical applications. They are considered as alternatives to fossil derived polymers and accumulated by microbes including extremophilic archaea as energy storage inclusions under nutrient limitations. The use of extremophilic archaea for PHA production is an economically viable option for conventional aerobic processes, but less is known about their pathways and PHA accumulation capacities. This review summarized: (a) specific adaptive mechanisms towards extreme environments by extremophiles and specific role of PHAs; (b) understanding of PHA synthesis/metabolism in archaea and specific functional genes; (c) genetic engineering and process engineering approaches required for high-rate PHA production using extremophilic archaea. To conclude, the future studies are suggested to understand the membrane lipids and PHAs accumulation to explain the adaptation mechanism of extremophiles and exploiting it for commercial production of PHAs.

The underexplored role of diverse stress factors in microbial biopolymer synthesis

Polyhydroxyalkanoates (PHA) are microbial polyesters which, apart from their primary storage role, enhance the stress robustness of PHA accumulating cells against various stressors. PHA also represent interesting alternatives to petrochemical polymers, which can be produced from renewable resources employing approaches of microbial biotechnology. During biotechnological processes, bacterial cells are exposed to various stressor factors such as fluctuations in temperature, osmolarity, pH-value, elevated pressure or the presence of microbial inhibitors. This review summarizes how PHA helps microbial cells to cope with biotechnological process-relevant stressors and, vice versa, how various stress conditions can affect PHA production processes. The review suggests a fundamentally new strategy for PHA production: the fine-tuned exposure to selected stressors, which might be used to boost PHA production and even to tailor their structure.

Haloarchaea as Cell Factories to Produce Bioplastics

Plastic pollution is a worldwide concern causing the death of animals (mainly aquatic fauna) and environmental deterioration. Plastic recycling is, in most cases, difficult or even impossible. For this reason, new research lines are emerging to identify highly biodegradable bioplastics or plastic formulations that are more environmentally friendly than current ones. In this context, microbes, capable of synthesizing bioplastics, were revealed to be good models to design strategies in which microorganisms can be used as cell factories. Recently, special interest has been paid to haloarchaea due to the capability of some species to produce significant concentrations of polyhydroxyalkanoate (PHA), polyhydroxybutyrate (PHB), and polyhydroxyvalerate (PHV) when growing under a specific nutritional status. The growth of those microorganisms at the pilot or industrial scale offers several advantages compared to that of other microbes that are bioplastic producers. This review summarizes the state of the art of bioplastic production and the most recent findings regarding the production of bioplastics by halophilic microorganisms with special emphasis on haloarchaea. Some protocols to produce/analyze bioplastics are highlighted here to shed light on the potential use of haloarchaea at the industrial scale to produce valuable products, thus minimizing environmental pollution by plastics made from petroleum.

Production of Polyhydroxyalkanoates (PHA) by Haloferax mediterranei from Food Waste Derived Nutrients for Biodegradable Plastic Applications

Polyhydroxyalkanoates (PHA) are a family of microbial polyesters that are used as biodegradable plastics in replacement of conventional plastics for various applications. However, the high production cost is the barrier for PHA market expansion. This study aimed to utilize food waste as low-cost feedstock to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei. The effects of acetate (Ac), propionate (Pr), butyrate (Bu), and the short-chain carboxylates derived from food waste were examined on the microbial growth and PHBV production. Results showed that a mixture of carboxylates provided a 55% higher PHBV yield than glucose. The food-waste-derived nutrients achieved the yields of 0.41 to 0.54 g PHBV/g Ac from initial loadings of 450 mg/l to 1,800 mg/l Ac of total carboxylates. And the consumption of individual carboxylate varied between different compositions of the carbon source. The present study demonstrates the potential of using food waste as feedstock to produce PHBV by Haloferax mediterranei, which can provide economic benefits to the current PHA industry. Meanwhile, it will also help promote organic waste reduction in landfills and waste management in general.

Utilization of Agave durangensis leaves by Bacillus cereus 4N for polyhydroxybutyrate (PHB) biosynthesis

Lignocellulosic wastes may provide a means to economize polyhydroxybutyrate (PHB) production. This study has proposed the use of Agave durangensis leaves obtained from the artisanal mezcal industry as a novel substrate for this aim. Results revealed an increase in PHB biosynthesis (0.32 g/L) and improvement in %PHB (16.79-19.51%) by Bacillus cereus 4N when A. durangensis leaves used as carbon source were physically pre-treated by ultrasound for 30 min (ADL + US30') and thermally pre-treated (ADL + Q). Chemical analyses and SEM studies revealed compositional and morphological changes when A. durangensis leaves were physically pre-treated. Also, elemental analysis of growth media showed that carbon/nitrogen ratios of 14-21, and low nitrogen, hydrogen, and protein content were well-suited for PHB biosynthesis. Confocal microscopy revealed morphological changes in the bacterial cell and carbonosome structure under the influence of different substrates. Finally, Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) analyses showed that homopolymeric PHB with a high thermal-resistance (271.94-272.89 °C) was produced. Therefore, the present study demonstrates the potential use of physically pre-treated A. durangensis leaves to produce PHB. These results promote the development of a circular economy in Mexico, where lignocellulosic wastes can be employed to produce value-added biotechnological products.

Biosynthesis of Polyhydroxyalkanoates from Defatted Chlorella Biomass as an Inexpensive Substrate

Microalgae biomass has been recently used as an inexpensive substrate for the industrial production of polyhydroxyalkanoates (PHAs). In this work, a dilute acid pretreatment using 0.3 N of hydrochloric acid (HCl) was performed to extract reducing sugars from 10% (w/v) of defatted Chlorella biomass (DCB). The resulting HCl DCB hydrolysate was used as a renewable substrate to assess the ability of three bacterial strains, namely Bacillus megaterium ALA2, Cupriavidus necator KCTC 2649, and Haloferax mediterranei DSM 1411, to produce PHA in shake flasks. The results show that under 20 g/L of DCB hydrolysate derived sugar supplementation, the cultivated strains successfully accumulated PHA up to 29.7–75.4% of their dry cell weight (DCW). Among the cultivated strains, C. necator KCTC 2649 exhibited the highest PHA production (7.51 ± 0.20 g/L, 75.4% of DCW) followed by H. mediterranei DSM 1411 and B. megaterium ALA2, for which a PHA content of 3.79 ± 0.03 g/L (55.5% of DCW) and 0.84 ± 0.06 g/L (29.7% of DCW) was recorded, respectively. Along with PHA, a maximum carotenoid content of 1.80 ± 0.16 mg/L was produced by H. mediterranei DSM 1411 at 120 h of cultivation in shake flasks. PHA and carotenoid production increased by 1.45- and 1.37-fold, respectively, when HCl DCB hydrolysate biotransformation was upscaled to a 1 L of working volume fermenter. Based on FTIR and 1H NMR analysis, PHA polymers accumulated by B. megaterium ALA2 and C. necator KCTC 2649 were identified as homopolymers of poly(3-hydroxybutyrate). However, a copolymer of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with a 3-hydroxyvalerate fraction of 10.5 mol% was accumulated by H. mediterranei DSM 1411.

Polyhydroxyalkanoate nanoparticles produced by marine bacteria cultivated on cost effective Mediterranean algal hydrolysate media

Algae are omnipresent in all seas and oceans, which make thema target for many applications such as bio-fertilizers, fish feeding and removal of heavy metals. In the present study, different algal species were examined as sustainable alternatives substrates for PHA production by Halomonas sp. Several media simulations were utilized to achieve high polymer productivity. The maximum poly(3-hydroxybutyrate) (PHB) concentrations were determined by using Corallina mediterranea hydrolysates as a carbon and nitrogen source. The isolates Halomonas pacifica ASL10 and Halomonas salifodiane ASL11 were found to be able to produce PHA by 67 % wt and 63 % wt CDW, respectively. PHB nanoparticles (NPs) had high zeta potential values and small particle sizes. These properties make it suitable for several drug delivery and pharmaceutical applications. Interestingly, NPs showed a potent antibacterial activity against several reference strains. The antibacterial efficacy of PHA-NPs has not been previously studied, thus this study opens a promising use of PHA-NPs.

Halophilic archaea and their potential to generate renewable fuels and chemicals

Lignocellulosic biofuels and chemicals have great potential to reduce our dependence on fossil fuels and mitigate air pollution by cutting down on greenhouse gas emissions. Chemical, thermal, and enzymatic processes are used to release the sugars from the lignocellulosic biomass for conversion to biofuels. These processes often operate at extreme pH conditions, high salt concentrations, and/or high temperature. These harsh treatments add to the cost of the biofuels, as most known biocatalysts do not operate under these conditions. To increase the economic feasibility of biofuel production, microorganisms that thrive in extreme conditions are considered as ideal resources to generate biofuels and value-added products. Halophilic archaea (haloarchaea) are isolated from hypersaline ecosystems with high salt concentrations approaching saturation (1.5-5 M salt concentration) including environments with extremes in pH and/or temperature. The unique traits of haloarchaea and their enzymes that enable them to sustain catalytic activity in these environments make them attractive resources for use in bioconversion processes that must occur across a wide range of industrial conditions. Biocatalysts (enzymes) derived from haloarchaea occupy a unique niche in organic solvent, salt-based, and detergent industries. This review focuses on the use of haloarchaea and their enzymes to develop and improve biofuel production. The review also highlights how haloarchaea produce value-added products, such as antibiotics, carotenoids, and bioplastic precursors, and can do so using feedstocks considered "too salty" for most microbial processes including wastes from the olive-mill, shell fish, and biodiesel industries.

Hydrothermal processing of a green seaweed Ulva sp. for the production of monosaccharides, polyhydroxyalkanoates, and hydrochar

In the fermentation and bioenergy industry, terrestrial biomass is usually fractionated and the collected components, such as starch, are processed separately. Such a separation has not been reported for seaweeds. In this work, the direct hydrothermal processing of the whole green seaweed Ulva sp. biomass is compared to processing of separated starch and cellulose, to find the preferable route for monosaccharide, hydrochar, and polyhydroxyalkanoates (PHA) production. Glucose was the major released monosaccharide. A significant share of the glucose yield comes from the starch fraction. The highest hydrochar yield with the lowest ash content was obtained from the separated cellulose fraction. The highest PHA yield was obtained using a whole Ulva sp. hydrolysate fermentation with Haloferaxmediterranei. Economic analysis shows the advantage of direct Ulva sp. biomass fermentation to PHA. The co-production of glucose and hydrochar does not add significant economic benefits to the process under plausible prices of the two outputs.

Archaea Biotechnology

Archaea are a domain of prokaryotic organisms with intriguing physiological characteristics and ecological importance. In Microbial Biotechnology, archaea are historically overshadowed by bacteria and eukaryotes in terms of public awareness, industrial application, and scientific studies, although their biochemical and physiological properties show a vast potential for a wide range of biotechnological applications. Today, the majority of microbial cell factories utilized for the production of value-added and high value compounds on an industrial scale are bacterial, fungal or algae based. Nevertheless, archaea are becoming ever more relevant for biotechnology as their cultivation and genetic systems improve. Some of the main advantages of archaeal cell factories are the ability to cultivate many of these often extremophilic organisms under non-sterile conditions, and to utilize inexpensive feedstocks often toxic to other microorganisms, thus drastically reducing cultivation costs. Currently, the only commercially available products of archaeal cell factories are bacterioruberin, squalene, bacteriorhodopsin and diether-/tetraether-lipids, all of which are produced utilizing halophiles. Other archaeal products, such as carotenoids and biohydrogen, as well as polyhydroxyalkanoates and methane are in early to advanced development stages, respectively. The aim of this review is to provide an overview of the current state of Archaea Biotechnology by describing the actual state of research and development as well as the industrial utilization of archaeal cell factories, their role and their potential in the future of sustainable bioprocessing, and to illustrate their physiological and biotechnological potential.

A review on recovery of proteins from industrial wastewaters with special emphasis on PHA production process: Sustainable circular bioeconomy process development

The economy of the polyhydroxyalkanoate (PHA) production process could be supported by utilising the different by-products released simultaneously during its production. Among these, proteins are present in high concentrations in liquid stream which are released after the cell disruption along with PHA granules. These microbial proteins can be used as animal feed, adhesive material and in manufacturing of bioplastics. The recycling of the protein containing liquid stream also serves as a promising approach to maintain circular bioeconomy in the route. For this aim, it is important to obtain good yield and limit the drawbacks of protein recovery processes and associated costs. The review focuses on recycling of the liquid stream generated during acid/thermal-alkali treatment for PHA production that would close the gap in linear economy and attain circularity in the process. Examples to recover proteins from other industrial waste streams along with their applications have also been discussed.

Polyhydroxyalkanoate and its efficient production: an eco-friendly approach towards development

Polyhydroxyalkanoate (PHA) is the most promising solution to major ecological problem of plastic accumulation. The biodegradable and biocompatible properties of PHA make it highly demanding in the biomedical and agricultural field. The limited market share of PHA industries despite having tremendous demand as concerned with environment has led to knock the doors of scientific research for finding ways for the economic production of PHA. Therefore, new methods of its production have been applied such as using a wide variety of feedstock like organic wastes and modifying PHA synthesizing enzyme at molecular level. Modifying metabolic pathways for PHA production using new emerging techniques like CRISPR/Cas9 technology has simplified the process spending less amount of time. Using green solvents under pressurized conditions, ionic liquids, supercritical solvents, hypotonic cell disintegration for release of PHA granules, switchable anionic surfactants and even digestion of non-PHA biomass by animals are some novel strategies for PHA recovery which play an important role in sustainable production of PHA. Hence, this review provides a view of recent applications, significance of PHA and new methods used for its production which are missing in the available literature.

Production of polyhydroxyalkanoates (PHA) by a thermophilic strain of Schlegelella thermodepolymerans from xylose rich substrates

The aim of this work was to investigate the thermophilic bacterium Schelegelella thermodepolymerans DSM 15344 in terms of its polyhydroxyalkanoates (PHA) biosynthesis capacity. The bacterium is capable of converting various sugars into PHA with the optimal growth temperature of 55 °C; therefore, the process of PHA biosynthesis could be robust against contamination. Surprisingly, the highest yield was gained on xylose. Results suggested that S. thermodepolymerans possess unique xylose metabolism since xylose is utilized preferentially with the highest consumption rate as compared to other sugars. In the genome of S. thermodepolymerans DSM 15344, a unique putative xyl operon consisting of genes responsible for xylose utilization and also for its transport was identified, which is a unique feature among PHA producers. The bacterium is capable of biosynthesis of copolymers containing 3-hydroxybutyrate and also 3-hydroxyvalerate subunits. Hence, S.thermodepolymerans seems to be promising candidate for PHA production from xylose rich substrates.

Production of the Polyhydroxyalkanoate PHBV from Ricotta Cheese Exhausted Whey by Haloferax mediterranei Fermentation

In the last decade, the dairy industry underwent a rapid expansion due to the increasing demand of milk-based products, resulting in high quantity of wastewater, i.e., whey and ricotta cheese exhausted whey (RCEW). Although containing high content of nutritional compounds, dairy by-products are still disposed as waste rather being reintroduced in a new production chain, hence leading to environmental and economic issues. This study proposes a new biotechnological approach based on the combination of membrane filtration and fermentation to produce poly-hydroxyalkanoates (PHA), biodegradable bioplastics candidate as an alternative to petroleum-derived plastics. The protocol, exploiting the metabolic capability Haloferax mediterranei to synthesize PHA from RCEW carbon sources, was set up under laboratory and pilot scale conditions. A multi-step fractionation was used to recover a RCEW fraction containing 12.6% (w/v) of lactose, then subjected to an enzymatic treatment aimed at releasing glucose and galactose. Fermentation conditions (culture medium for the microorganism propagation, inoculum size, time, and temperature of incubation) were selected according to the maximization of polymer synthesis, under in-flasks experiments. The PHA production was then tested using a bioreactor system, under stable and monitored pH, temperature, and stirring conditions. The amount of the polymer recovered corresponded to 1.18 g/L. The differential scanning calorimetry (DSC) analysis revealed the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) as the polymer synthesized, with a relatively high presence of hydroxyvalerate (HV). Identity and purity of the polymer were confirmed by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) and X-ray photoelectron (XPS) spectroscopy analyses. By combining the fractionation of RCEW, one of the most abundant by-products from the agri-food industry, and the use of the halophile Hfx mediterranei, the production of PHBV with high purity and low crystallinity has successfully been optimized. The process, tested up to pilot scale conditions, may be further implemented (e.g., through fed-batch systems) and used for large-scale production of bioplastics, reducing the economical and environmental issues related the RCEW disposal.

Integrated and Consolidated Review of Plastic Waste Management and Bio-Based Biodegradable Plastics: Challenges and Opportunities

Cumulative plastic production worldwide skyrocketed from about 2 million tonnes in 1950 to 8.3 billion tonnes in 2015, with 6.3 billion tonnes (76%) ending up as waste. Of that waste, 79% is either in landfills or the environment. The purpose of the review is to establish the current global status quo in the plastics industry and assess the sustainability of some bio-based biodegradable plastics. This integrative and consolidated review thus builds on previous studies that have focused either on one or a few of the aspects considered in this paper. Three broad items to strongly consider are: Biodegradable plastics and other alternatives are not always environmentally superior to fossil-based plastics; less investment has been made in plastic waste management than in plastics production; and there is no single solution to plastic waste management. Some strategies to push for include: increasing recycling rates, reclaiming plastic waste from the environment, and bans or using alternatives, which can lessen the negative impacts of fossil-based plastics. However, each one has its own challenges, and country-specific scientific evidence is necessary to justify any suggested solutions. In conclusion, governments from all countries and stakeholders should work to strengthen waste management infrastructure in low- and middle-income countries while extended producer responsibility (EPR) and deposit refund schemes (DPRs) are important add-ons to consider in plastic waste management, as they have been found to be effective in Australia, France, Germany, and Ecuador.

Utilizing the crop waste of date palm fruit to biosynthesize polyhydroxyalkanoate bioplastics with favorable properties

Polyhydroxyalkanoate (PHA), a family of biodegradable and renewable biopolymers that could potentially play a significant role in bioeconomy. In this study we investigated the potential of date waste (DW) biomass as feedstock to produce PHA by the halophilic archaeon Haloferax mediterranei. The concentration of essential trace elements for H. mediterranei cells during growth and PHA biopolymer accumulation was optimized. A maximum cell dry mass of (CDM) (12.8 g L^-1) and PHA concentration of (3.20 g L^-1) were achieved in DW extract media that was not supplemented with trace elements, indicating that DW is a promising source for trace elements. The cultivation was scaled-up to fed-batch bioreactor fermentations under non-sterile conditions and resulted in CDM and PHA content of 18.0 g L^-1 and 25%, respectively. The produced PHA was confirmed to be poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) with high 3-hydroxyvalerate (3 HV) content of 18.0 mol%. This 3 HV molar percent was achieved without the addition of expensive precursors. The PHBV is of high molecular weight (746.0 kDa) and narrow polydispersity (PDI = 1.5), and displayed reduced melting at 148.1 °C. The X-ray diffraction (XRD) analysis showed that the PHBV has amorphous nature which increases the degradation rates and workability of the biopolymer. The isotopic ratio ¹³C/¹²C (δ ¹³C) for PHBV was found to be - 19.1‰, which indicated that H. mediterranei prefers lighter bonds to break and uses the lighter atoms for the biosynthesis of PHBV.