Aseptic production of citric and isocitric acid from crude glycerol by genetically modified Yarrowia lipolytica

Engineered yeast Yarrowia lipolytica as a chassis for biosynthesis of fatty acids from mannitol and macroalgal biomass extracts

BACKGROUND

Yarrowia lipolytica possesses the capability to utilize many unconventional carbon sources, such as crude glycerol, alkanes and fatty acids. Despite producing polyols, such as erythritol, arabitol and mannitol, the re-utilization of mannitol is not as efficient as erythritol utilization. Genes involved in mannitol uptake and metabolism in Y. lipolytica remain undescribed. However, deletion of the EYD1 gene (YALI0F01650g), believed to encode erythritol dehydrogenase, has been found to result in a high rate of growth on media containing mannitol as the sole carbon source. Therefore this unique feature was used for further fermentation studies on media containing macroalgal mannitol extracts, obtained from the brown alga Fucus vesiculosus, to produce value-added products.

RESULTS

The obtained strain AJD Δeyd1Dga1 was able to uptake pure and algal mannitol efficiently and produce high amounts of lipids, thanks to overexpression of the DGA1 gene (YALI0E32769g), encoding diacylglycerol (DAG) acyltransferase. The lipid content reached almost 32% of the overall dry biomass as compared to the wild type strain, where this value was more than 4 times lower. Additionally, the biomass at the end of the experiment was the highest among all of the tested strains, reaching 12.67 g/L, more than 50% higher than the control strain.

CONCLUSIONS

The results of this study shed new light on the potential for the yeast Y. lipolytica to utilize macroalgae biomass as a carbon source for production of value-added products, including biomass and lipids. Moreover, the increased mannitol utilization capabilities can provide new insight into mannitol metabolism, including its uptake, which is especially crucial, as the metabolic pathways for all polyols produced by this organism seem to be closely intertwined.

Advancements in metabolic engineering: unlocking the potential of key organic acids for sustainable industrial applications

This review explores the advancements, application potential, and challenges of microbial metabolic engineering strategies for sustainable organic acid production. By integrating gene editing, pathway reconstruction, and dynamic regulation, microbial platforms have achieved enhanced biosynthesis of key organic acids such as pyruvate, lactic acid, and succinic acid. Strategies including by-product pathway knockout, key enzyme overexpression, and improved CO2 fixation have contributed to higher production efficiency. Additionally, utilizing non-food biomass sources, such as lignocellulose, algal feedstocks, and industrial waste, has reduced reliance on conventional carbon sources, supporting sustainability goals. However, challenges remain in substrate inhibition, purification complexity, and metabolic flux imbalances. Addressing these requires omics-driven metabolic optimization, stress-resistant strain development, and biorefinery integration. Future research should focus on system-level design to enhance cost-effectiveness and sustainability, advancing industrial bio-manufacturing of organic acids.

Non-conventional yeasts: promising cell factories for organic acid bioproduction

Microbial production of organic acids has been hindered by the poor acid tolerance of microorganisms and the high costs of waste salt reprocessing. The robustness of non-conventional microorganisms in an acidic environment makes it possible to produce organic acids at low pH and greatly simplifies downstream processing. In this review we discuss the environmental adaptability features of non-conventional yeasts, as well as the latest developments in genomic engineering strategies that have facilitated metabolic engineering of these strains. We also use selected examples of three-carbon (C3), C4, and C6 organic acids to illustrate the ongoing efforts and challenges of using non-conventional yeasts for organic acid production. This review provides theoretical guidance for the construction of highly robust organic acid producers.

Advancing Succinic Acid Biomanufacturing Using the Nonconventional Yeast Yarrowia lipolytica

Succinic acid is an essential bulk chemical with wide-ranging applications in materials, food, and pharmaceuticals. With the advancement of biotechnology, there has been a surge in focus on low-carbon sustainable microbial synthesis methods for producing biobased succinic acid. Due to its high intrinsic acid tolerance, Yarrowia lipolytica has gained recognition as a competitive chassis for the industrial manufacture of succinic acid. This review summarizes the research progress on succinic acid biomanufacturing using Y. lipolytica. First, it introduces the major metabolic routes for succinic acid biosynthesis and the pertinent engineering approaches for building efficient cell factories. Subsequently, we offer a review of methods employed for succinic acid synthesis by Y. lipolytica utilizing alternative substrates as well as the relevant optimization strategies for the fermentation process. Finally, future research directions for improving succinic acid biomanufacturing in Y. lipolytica are delineated in light of the recent progress, obstacles, and trends in this area.

Development of citric acid-based biomaterials for biomedical applications

The development of bioactive materials with controllable preparation is of great significance for biomedical engineering. Citric acid-based biomaterials are one of the few bioactive materials with many advantages such as simple synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, controllable biodegradability, and further functionalization. In this paper, we review the development of multifunctional citrate-based biomaterials for biomedical applications, and summarize their multifunctional properties in terms of physical, chemical, and biological aspects, and finally the applications of citrate-based biomaterials in biomedical engineering, including bone tissue engineering, skin tissue engineering, drug/cell delivery, vascular and neural tissue engineering, and bioimaging.

Engineering Yarrowia lipolytica to Produce l-Malic Acid from Glycerol

The declining availability of cheap fossil-based resources has sparked growing interest in the sustainable biosynthesis of organic acids. l-Malic acid, a crucial four-carbon dicarboxylic acid, finds extensive applications in the food, chemical, and pharmaceutical industries. Synthetic biology and metabolic engineering have enabled the efficient microbial production of l-malic acid, albeit not in Yarrowia lipolytica, an important industrial microorganism. The present study aimed to explore the potential of this fungal species for the production of l-malic acid. First, endogenous biosynthetic genes and heterologous transporter genes were overexpressed in Y. lipolytica to identify bottlenecks in the l-malic acid biosynthesis pathway grown on glycerol. Second, overexpression of isocitrate lyase, malate synthase, and malate dehydrogenase in the glyoxylate cycle pathway and introduction of a malate transporter from Schizosaccharomyces pombe significantly boosted l-malic acid production, which reached 27.0 g/L. A subsequent increase to 37.0 g/L was attained through shake flask medium optimization. Third, adaptive laboratory evolution allowed the engineered strain Po1g-CEE2+Sp to tolerate a lower pH and to accumulate a higher amount of l-malic acid (56.0 g/L). Finally, when scaling up to a 5 L bioreactor, a titer of 112.5 g/L was attained. In conclusion, this study demonstrates for the first time the successful production of l-malic acid in Y. lipolytica by combining metabolic engineering and laboratory evolution, paving the way for large-scale sustainable biosynthesis of this and other organic acids.

Developing polycistronic expression tool in Yarrowia lipolytica

Unconventional oleaginous yeast Yarrowia lipolytica has gained widespread applications as a microbial cell factory for synthesizing various chemicals and natural products. The construction of efficient cell factories requires intricate metabolic engineering. However, multi-gene expression in Y. lipolytica is labor-intensive. To facilitate multi-gene expression, we developed the polycistronic expression tool using 2A peptides. We first compared different 2A peptides in Y. lipolytica and identified two 2A peptides with high cleavage efficiency: P2A and ERBV-1. The effect of 2A peptides on the expression level of upstream and downstream genes was then determined. Ultimately, we applied the identified 2A peptides to express four genes in canthaxanthin biosynthetic pathway within one expression cassette for canthaxanthin production. This study enriches the multi-gene expression tools of Y. lipolytica, which will facilitate the cell factory construction of Y. lipolytica.

Multidimensional combinatorial screening for high-level production of erythritol in Yarrowia lipolytica

Yarrowia lipolytica was successfully engineered to synthesize erythritol from crude glycerol, a cheap by-product of biodiesel production, but the yield remained low. Here, a biosensor-guided adaptive evolution screening platform was constructed to obtain mutant strains which could efficiently utilize crude glycerol to produce erythritol. Erythrose reductase D46A (M1) was identified as a key mutant through whole-genome sequencing of the strain G12, which exhibited higher catalytic activity (1.6-fold of the wild-type). M1 was further modified to obtain a combinatorial mutant with 4.1-fold enhancement of catalytic activity. Finally, the metabolic network was reconfigured to redirect carbon fluxes toward erythritol synthesis. The erythritol titer of the engineered strain G31 reached 220.5 g/L with a productivity of 1.8 g/L/h in a 5-L bioreactor. The study provides valuable guidance for biosensor-based ultra-high-throughput screening strategies in Y. lipolytica, as well as presenting a new paradigm for the sustainable valorization of crude glycerol.

A systematic review on utilization of biodiesel-derived crude glycerol in sustainable polymers preparation

With the rapid development of biodiesel, biodiesel-derived glycerol has become a promising renewable bioresource. The key to utilizing this bioresource lies in the value-added conversion of crude glycerol. While purifying crude glycerol into a pure form allows for diverse applications, the intricate nature of this process renders it costly and environmentally stressful. Consequently, technology facilitating the direct utilization of unpurified crude glycerol holds significant importance. It has been reported that crude glycerol can be bio-transformed or chemically converted into high-value polymers. These technologies provide cost-effective alternatives for polymer production while contributing to a more sustainable biodiesel industry. This review article describes the global production and quality characteristics of biodiesel-derived glycerol and investigates the influencing factors and treatment of the composition of crude glycerol including water, methanol, soap, matter organic non-glycerol, and ash. Additionally, this review also focused on the advantages and challenges of various technologies for converting crude glycerol into polymers, considering factors such as the compatibility of crude glycerol and the control of unfavorable factors. Lastly, the application prospect and value of crude glycerol conversion were discussed from the aspects of economy and environmental protection. The development of new technologies for the increased use of crude glycerol as a renewable feedstock for polymer production will be facilitated by the findings of this review, while promoting mass market applications.

Application of New Yarrowia lipolytica Transformants in Production of Citrates and Erythritol from Glycerol

Citric acid and erythritol are obtained on an industrial scale using biotechnological methods. Due to the growing market demand for these products, research is underway to improve the process economics by introducing new microorganisms, in particular of the species Yarrowia lipolytica. The aim of this study was to evaluate transformants of Y. lipolytica for growth and ability to overproduce citric acids and erythritol from glycerol. The transformants were constructed by overexpressing glycerol kinase, methylcitrate synthase and mitochondrial succinate-fumarate transporter in the mutant Wratislavia 1.31. Next, strains were assessed for biosynthesis of citrate (pH 5.5; nitrogen limitation) and erythritol (pH 3.0; high osmotic pressure) from glycerol. Regardless of culture conditions strains, 1.31.GUT1/6 and 1.31.GUT1/6.CIT1/3 exhibited high rates of substrate utilization. Under conditions favoring citrate biosynthesis, both strains produced several percent more citrates, accompanied by higher erythritol production compared to the parental strain. During erythritol biosynthesis, the strain 1.31.GUT1/6.CIT1/3.E34672g obtained as a result of co-expression of all three genes stood out, producing 84.0 g/L of erythritol with yield and productivity of 0.54 g/g and 0.72 g/Lh, respectively, which places it in the group of the highest-ranked producers of erythritol among Y. lipolytica species.

Genome Editing, Transcriptional Regulation, and Forward Genetic Screening Using CRISPR-Cas12a Systems in Yarrowia lipolytica

Class II Type V endonucleases have increasingly been adapted to develop sophisticated and easily accessible synthetic biology tools for genome editing, transcriptional regulation, and functional genomic screening in a wide range of organisms. One such endonuclease, Cas12a, presents itself as an attractive alternative to Cas9-based systems. The ability to mature its own guide RNAs (gRNAs) from a single transcript has been leveraged for easy multiplexing, and its lack of requirement of a tracrRNA element, also allows for short gRNA expression cassettes. To extend these functionalities into the industrially relevant oleaginous yeast Yarrowia lipolytica, we developed a set of CRISPR-Cas12a vectors for easy multiplexed gene knockout, repression, and activation. We further extended the utility of this CRISPR-Cas12a system to functional genomic screening by constructing a genome-wide guide library targeting every gene with an eightfold coverage. Pooled CRISPR screens conducted with this library were used to profile Cas12a guide activities and develop a machine learning algorithm that could accurately predict highly efficient Cas12a gRNA. In this protocols chapter, we first present a method by which protein coding genes may be functionally disrupted via indel formation with CRISPR-Cas12a systems. Further, we describe how Cas12a fused to a transcriptional regulator can be used in conjunction with shortened gRNA to achieve transcriptional repression or activation. Finally, we describe the design, cloning, and validation of a genome-wide library as well as a protocol for the execution of a pooled CRISPR screen, to determine guide activity profiles in a genome-wide context in Y. lipolytica. The tools and strategies discussed here expand the list of available synthetic biology tools for facile genome engineering in this industrially important host.

Citric Acid: Properties, Microbial Production, and Applications in Industries

Citric acid finds broad applications in various industrial sectors, such as the pharmaceutical, food, chemical, and cosmetic industries. The bioproduction of citric acid uses various microorganisms, but the most commonly employed ones are filamentous fungi such as Aspergillus niger and yeast Yarrowia lipolytica. This article presents a literature review on the properties of citric acid, the microorganisms and substrates used, different fermentation techniques, its industrial utilization, and the global citric acid market. This review emphasizes that there is still much to explore, both in terms of production process techniques and emerging new applications of citric acid.

The growth and lipid accumulation of Scenedesmus quadricauda under nitrogen starvation stress during xylose mixotrophic/heterotrophic cultivation

In order to conquer the block of high cost and low yields which limit to realize the commercialization of microalgal biodiesel, the mixotrophic and heterotrophic cultivation of Scenedesmus quadricauda FACHB-1297 fed on xylose was separately studied employing six forms of media: phosphorus sufficient, phosphorus restricted, and phosphorus starvation were combined with nitrogen sufficient and nitrogen starvation conditions. The maximum lipid content (about 41% of dry weight) was obtained on the 5th day (heterotrophic cultivation) and 8th day (mixotrophic cultivation) under the nitrogen starved and phosphorus sufficient (N0&P) conditions, which was about twofold in comparison to the final lipid content on the sufficient nitrogen condition (control). Under mixotrophic and heterotrophic modes, the highest lipid production was achieved in the N0&P trial, with the value of 274.96 mg/L and 193.77 mg/L, respectively. Xylose utilization rate of 30-96% under heterotrophic modes was apparently higher than that of 20-50% in mixotrophic modes. In contrast, phosphorus uptake rate of 100% under mixotrophic cultivation was significantly more than that of 60-90% in heterotrophic cultivation. Furthermore, under the condition of heterotrophic cultivation using xylose as a carbon source, the phosphorus had a positive impact on microalgae cell synthesis and the lipid content enhanced with the augmentation in phosphorus concentrations. We suggested that sufficient phosphorus should be supplied for obtaining higher microalgal lipid production in the lack of nitrogen under xylose heterotrophic/mixotrophic condition. This was a highly effective way to obtain efficient microalgae lipid production.

In-depth analysis of erythrose reductase homologs in Yarrowia lipolytica

The unconventional yeast Yarrowia lipolytica produces erythritol as an osmoprotectant to adapt to osmotic stress. In this study, the array of putative erythrose reductases, responsible for the conversion of d-erythrose to erythritol, was analyzed. Single knockout and multiple knockout strains were tested for their ability to produce polyols in osmotic stress conditions. Lack of six of the reductase genes does not affect erythritol significantly, as the production of this polyol is comparable to the control strain. Deletion of eight of the homologous erythrose reductase genes resulted in a 91% decrease in erythritol synthesis, a 53% increase in mannitol synthesis, and an almost 8-fold increase in arabitol synthesis as compared to the control strain. Additionally, the utilization of glycerol was impaired in the media with induced higher osmotic pressure. The results of this research may shed new light on the production of arabitol and mannitol from glycerol by Y. lipolytica and help to develop strategies for further modification in polyol pathways in these microorganisms.

A Comparative Study on Heavy Metal Removal from CCA-Treated Wood Waste by Yarrowia lipolytica: Effects of Metal Stress

Bioremediation is an effective way to remove heavy metals from pollutants. This study investigated the effects of Yarrowia lipolytica (Y. lipolytica) on the bioremediation of chromated copper arsenate (CCA)-treated wood wastes. Copper ions stressed the yeast strains to improve their bioremediation efficiency. A comparison of changes in morphology, chemical composition, and metal content of CCA wood before and after bioremediation was conducted. The amount of arsenic (As), chromium (Cr), and copper (Cu) was quantified by microwave plasma atomic emission spectrometer. The results showed that yeast strains remained on the surface of CCA-treated wood after bioremediation. The morphologies of the strains changed from net to spherical because of the Cu²⁺ stress. Fourier-transform infrared spectroscopy showed that carboxylic acid groups of wood were released after removing heavy metals. A large amount of oxalic acid was observed when the optical density (OD_600nm) was 0.05 on the 21st day. Meanwhile, the highest removal rate of Cu, As, and Cr was 82.8%, 68.3%, and 43.1%, respectively. Furthermore, the Cu removal from CCA-treated wood increased by about 20% after Cu²⁺ stress. This study showed that it is feasible to remove heavy metals from CCA-treated wood by Y. lipolytica without destroying the wood structure, especially by copper-induced Y. lipolytica.

Engineering Strategies for Efficient Bioconversion of Glycerol to Value-Added Products by Yarrowia lipolytica

Yarrowia lipolytica has been a valuable biotechnological workhorse for the production of commercially important biochemicals for over 70 years. The knowledge gained so far on the native biosynthetic pathways, as well as the availability of numerous systems and synthetic biology tools, enabled not only the regulation and the redesign of the existing metabolic pathways, but also the introduction of novel synthetic ones; further consolidating the position of the yeast in industrial biotechnology. However, for the development of competitive and sustainable biotechnological production processes, bioengineering should be reinforced by bioprocess optimization strategies. Although there are many published reviews on the bioconversion of various carbon sources to value-added products by Yarrowia lipolytica, fewer works have focused on reviewing up-to-date strain, medium, and process engineering strategies with an aim to emphasize the significance of integrated engineering approaches. The ultimate goal of this work is to summarize the necessary knowledge and inspire novel routes to manipulate at a systems level the yeast biosynthetic machineries by combining strain and bioprocess engineering. Due to the increasing surplus of biodiesel-derived waste glycerol and the favored glycerol-utilization metabolic pathways of Y. lipolytica over other carbon sources, the present review focuses on pure and crude glycerol-based biomanufacturing.

Large-Scale Production of Isocitric Acid Using Yarrowia lipolytica Yeast with Further Down-Stream Purification

Isocitric acid (ICA) refers to a group of promising regulators of energy metabolism which has antistress, antihypoxic, and antioxidant activities. In this paper, we reported a process of ICA production from rapeseed oil using yeast Yarrowia lipolytica VKM Y-2373 in a 500-L fermentor. The producer synthesized 64.1 g/L ICA with a product yield of 0.72 g/g and a productivity 0.54 g/L·h. We also developed an effective purification method, including a cell separation, clarification, concentration, acidification, and crystallization process, which resulted in the formation of the crystals of monopotassium salt of ICA with a purity of 99.0–99.9%. To the best of our knowledge, this is the first report on an ICA production process at an upscaled bioreactor level.

Polyhydroxybutyrate production from crude glycerol using a highly robust bacterial strain Halomonas sp. YLGW01

Petrochemical-based plastics are hardly biodegradable and a major cause of environmental pollution, and polyhydroxybutyrate (PHB) is attracting attention as an alternative due to its similar properties. However, the cost of PHB production is high and is considered the greatest challenge for its industrialization. Here, crude glycerol was used as a carbon source for more efficient PHB production. Among the 18 strains investigated, Halomonas taeanenisis YLGW01 was selected for PHB production due to its salt tolerance and high glycerol consumption rate. Furthermore, this strain can produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3 HV)) with 17 % 3 HV mol fraction when a precursor is added. PHB production was maximized through medium optimization and activated carbon treatment of crude glycerol, resulting in 10.5 g/L of PHB with 60 % PHB content in fed-batch fermentation. Physical properties of the produced PHB were analyzed, i.e., weight average molecular weight (6.8 × 10⁵), number average molecular weight (4.4 × 10⁵), and the polydispersity index (1.53). In the universal testing machine analysis, the extracted intracellular PHB showed a decrease in Young's modulus, an increase in Elongation at break, greater flexibility than authentic film, and decreased brittleness. This study confirmed that YLGW01 is a promising strain for industrial PHB production using crude glycerol.

Establishing a growth-coupled mechanism for high-yield production of β-arbutin from glycerol in Escherichia coli

Biodiesel production has increased significantly in recent years, leading to an increase in the production of crude glycerol. In this study, a novel growth-coupled erythrose 4-phosphate (E4P) formation strategy that can be used to produce high levels of β-arbutin using engineered Escherichia coli and glycerol as the carbon source was developed. In the strategy, E4P formation was coupled with cell growth, and a growth-driving force made the E4P formation efficient. By applying this strategy, efficient microbial synthesis of β-arbutin was achieved, with 7.91 g/L β-arbutin produced in shaking flask, and 28.1 g/L produced in a fed batch fermentation with a yield of 0.20 g/g glycerol and a productivity of 0.39 g/L/h. This is the highest β-arbutin production through microbial fermentation ever reported to date. This study may have significant implications in the large-scale production of β-arbutin as well as other aromatic compounds of importance.

Metabolic and Process Engineering for Producing the Peach-Like Aroma Compound γ-Decalactone in Yarrowia lipolytica

Due to its strong and unique peach-like aroma, γ-decalactone is widely used in dairy products and other foods or beverages. The oleaginous yeast Yarrowia lipolytica, which is generally regarded as safe, has shown great potential in the production of this flavor compound. Recently, the development of metabolic and process engineering has enabled the application of Y. lipolytica for the production of γ-decalactone. This Review summarizes the relevant biosynthesis and degradation pathways of Y. lipolytica, after which the related metabolic engineering strategies to increase the accumulation of γ-decalactone are summarized. In addition, the factors affecting γ-decalactone accumulation in Y. lipolytica are introduced, and corresponding process optimization strategies are discussed. Finally, the current research needs are analyzed to search for remaining challenges and future directions in this field.

Recent advances and perspectives on production of value-added organic acids through metabolic engineering

Organic acids are important consumable materials with a wide range of applications in the food, biopolymer and chemical industries. The global consumer organic acids market is estimated to increase to $36.86 billion by 2026. Conventionally, organic acids are produced from the chemical catalysis process with petrochemicals as raw materials, which posts severe environmental concerns and conflicts with our sustainable development goals. Most of the commonly used organic acids can be produced from various organisms. As a state-of-the-art technology, large-scale fermentative production of important organic acids with genetically-modified microbes has become an alternative to the chemical route to meet the market demand. Despite the fact that bio-based organic acid production from renewable cheap feedstock provides a viable solution, low productivity has impeded their industrial-scale application. With our deeper understanding of strain genetics, physiology and the availability of strain engineering tools, new technologies including synthetic biology, various metabolic engineering strategies, omics-based system biology tools, and high throughput screening methods are gradually established to bridge our knowledge gap. And they were further applied to modify the cellular reaction networks of potential microbial hosts and improve the strain performance, which facilitated the commercialization of consumable organic acids. Here we present the recent advances of metabolic engineering strategies to improve the production of important organic acids including fumaric acid, citric acid, itaconic acid, adipic acid, muconic acid, and we also discuss the current challenges and future perspectives on how we can develop a cost-efficient, green and sustainable process to produce these important chemicals from low-cost feedstocks.

An overview on the conversion of glycerol to value-added industrial products via chemical and biochemical routes

Glycerol is a common by-product of industrial biodiesel syntheses. Due to its properties, availability, and versatility, residual glycerol can be used as a raw material in the production of high value-added industrial inputs and outputs. In particular, products like hydrogen, propylene glycol, acrolein, epichlorohydrin, dioxalane and dioxane, glycerol carbonate, n-butanol, citric acid, ethanol, butanol, propionic acid, (mono-, di-, and triacylglycerols), cynamoil esters, glycerol acetate, benzoic acid, and other applications. In this context, the present study presents a critical evaluation of the innovative technologies based on the use of residual glycerol in different industries, including the pharmaceutical, textile, food, cosmetic, and energy sectors. Chemical and biochemical catalysts in the transformation of residual glycerol are explored, along with the factors to be considered regarding the choice of catalyst route used in the conversion process, aiming at improving the production of these industrial products.

Lipid production from lignocellulosic biomass using an engineered Yarrowia lipolytica strain

BACKGROUND

The utilization of industrial wastes as feedstock in microbial-based processes is a one of the high-potential approach for the development of sustainable, environmentally beneficial and valuable bioproduction, inter alia, lipids. Rye straw hydrolysate, a possible renewable carbon source for bioconversion, contains a large amount of xylose, inaccessible to the wild-type Yarrowia lipolytica strains. Although these oleaginous yeasts possesses all crucial genes for xylose utilization, it is necessary to induce their metabolic pathway for efficient growth on xylose and mixed sugars from agricultural wastes. Either way, biotechnological production of single cell oils (SCO) from lignocellulosic hydrolysate requires yeast genome modification or adaptation to a suboptimal environment.

RESULTS

The presented Y. lipolytica strain was developed using minimal genome modification-overexpression of endogenous xylitol dehydrogenase (XDH) and xylulose kinase (XK) genes was sufficient to allow yeast to grow on xylose as a sole carbon source. Diacylglycerol acyltransferase (DGA1) expression remained stable and provided lipid overproduction. Obtained an engineered Y. lipolytica strain produced 5.51 g/L biomass and 2.19 g/L lipids from nitrogen-supplemented rye straw hydrolysate, which represents an increase of 64% and an almost 10 times higher level, respectively, compared to the wild type (WT) strain. Glucose and xylose were depleted after 120 h of fermentation. No increase in byproducts such as xylitol was observed.

CONCLUSIONS

Xylose-rich rye straw hydrolysate was exploited efficiently for the benefit of production of lipids. This study indicates that it is possible to fine-tune a newly strain with as minimally genetic changes as possible by adjusting to an unfavorable environment, thus limiting multi-level genome modification. It is documented here the use of Y. lipolytica as a microbial cell factory for lipid synthesis from rye straw hydrolysate as a low-cost feedstock.

Citric acid production by a novel autochthonous Candida zeylanoides isolate: optimization of process parameters

In this study, citric acid (CA) production by autochthonous Candida zeylanoides 7.12 was investigated and optimized. Response surface methodology (RSM) was used for the analysis of simultaneous effects of the chosen factors and 2 experiment designs were applied. In the first experimental design, the effects of initial pH value (5.5, 6.0 and 6.5), fermentation time (4, 5 and 6 days) and initial glucose concentration (125, 150 and 175 g/L) on CA production were investigated. Initial pH value was adjusted periodically with NaOH. Results of the statistical analysis showed that the model was found to be not applicable sufficiently to the chosen data. A second experimental design was employed at the same levels of glucose concentration and fermentation time by disabling the pH factor. pH level was kept at 6.5 with CaCO₃. Results of the statistical analysis showed that the fit of the model was good and the lack of fit was not significant (P > 0.05). The highest CA concentration of 11.36 g/L was obtained after 6 days of fermentation with an initial glucose concentration of 125 g/L. The results indicated that initial glucose concentration and fermentation time were important parameters for CA production by C. zeylanoides 7.12 and this strain could be used for future studies.

Modelling of the Citric Acid Production from Crude Glycerol by Wild-Type Yarrowia lipolytica DSM 8218 Using Response Surface Methodology (RSM)

Crude glycerol is the main by-product of the biodiesel manufacturing industry (10% w/w). Its use as a substrate in microbial fermentations is a concrete strategy to efficiently address its market surplus. In this study, the conversion of crude glycerol to citric acid, a key biochemical in the emerging bioeconomy, by a wild-type yeast Yarrowia lipolytica DSM 8218 was modelled using the Response Surface Methodology. The model relates C/N mass ratio and crude glycerol concentration to maximize the citric acid yield in flask scale using two different N sources, yeast extract and ammonium sulphate. Under the optimal conditions (yeast extract, C/N 141, glycerol 33 g/L), the conversion yield was 0.249 g/g. The optimal conditions were used for up-scaling a fed-batch fermentation in a 2 L bioreactor highlighting a metabolic shift from mannitol to citric acid when high stirring rates were applied (800 rpm). In these conditions, a morphic transition from pseudo-mycelial form to round-shaped yeast-like cells was observed too.

Yarrowia lipolytica as an Alternative and Valuable Source of Nutritional and Bioactive Compounds for Humans

Yarrowia lipolytica, an oleagineous species of yeast, is a carrier of various important nutrients. The biomass of this yeast is an extensive source of protein, exogenous amino acids, bioavailable essenctial trace minerals, and lipid compounds as mainly unsaturated fatty acids. The biomass also contains B vitamins, including vitamin B12, and many other bioactive components. Therefore, Y. lipolytica biomass can be used in food supplements for humans as safe and nutritional additives for maintaining the homeostasis of the organism, including for vegans and vegetarians, athletes, people after recovery, and people at risk of B vitamin deficiencies.

Response mechanism of gut microbiome and metabolism of European seabass (Dicentrarchus labrax) to temperature stress

In animals, the gut microbiome is vital to growth, and changes in the composition of these microbial communities may affect growth and adaptability to the environment. Temperature is another important factor that influences the healthy growth of animals. To date, the mechanism by which juvenile European seabass (Dicentrarchus labrax) and their symbiotic flora adapt to changes in environmental temperature is not well understood. Therefore, we evaluated the effect of temperature on the gut microbiota and metabolism of European seabass juveniles. We used 16S rRNA gene amplicon sequencing and non-targeted liquid chromatography with tandem mass spectrometry (LC-MS/MS)-based metabolomics to study the gut microbes of European seabass after 60 days of rearing of water temperature at 10 °C (T1), 15 °C (T2) and 20 °C (T3). At the phylum level, the abundance of the gut microbiota did not differ significantly among the three groups after 60 days of cultivation. At the genus level, however, the abundance of Faecalibacterium, Filifactor, Butyricicoccus, and Erysipelotrichaceae UCG-006 in the intestines differed significantly among the temperature groups. Compared with T2, the relative abundance of Filifactor in T1 was significantly increased, while Faecalibacterium was significantly decreased, while the relative abundance of Butyricicoccus and Erysipelotrichaceae UCG-006 in T3 was significantly increased. The LC-MS/MS analysis revealed 107 metabolites in the 10 °C group and 68 metabolites in the 20 °C group that differed significantly from those in the intestines of fish in the 15 °C control group. These metabolites are closely related to several metabolic pathways, including amino acid metabolism, glucose and lipid metabolism, and the tricarboxylic acid cycle. Correlation analysis of the Intestine microbiota, metabolic pathways, and metabolites identified metabolic pathways and metabolites that were strongly related to the observed significant differences in the microbiome among the temperature groups. These results show that temperature can induce significant changes in the gut microbiota and metabolism of European seabass juveniles, and that significant changes in metabolites may be mediated through the interaction of the microbiome and metabolic pathways.

Advancing Yarrowia lipolytica as a superior biomanufacturing platform by tuning gene expression using promoter engineering

Yarrowia lipolytica is recognized as an excellent non-conventional yeast in the field of biomanufacturing, where it is used as a host to produce oleochemicals, terpenes, organic acids, polyols and recombinant proteins. Consequently, metabolic engineering of this yeast is becoming increasingly popular to advance it as a superior biomanufacturing platform, of which promoters are the most basic elements for tuning gene expression. Endogenous promoters of Yarrowia lipolytica were reviewed, which are the basis for promoter engineering. The engineering strategies, such as hybrid promoter engineering, intron enhancement promoter engineering, and transcription factor-based inducible promoter engineering are described. Additionally, the applications of Yarrowia lipolytica promoter engineering to rationally reconstruct biosynthetic gene clusters and improve the genome-editing efficiency of the CRISPR-Cas systems were reviewed. Finally, research needs and future directions for promoter engineering are also discussed in this review.

A comprehensive review on carbon source effect of microalgae lipid accumulation for biofuel production

Energy is a major driving force for the economic development. Due to the scarcity of fossil fuels and negative impact on the environment, it is important to develop renewable and sustainable energy sources for humankind. Microalgae as the primary feedstock for biodiesel has shown great application potential. However, lipid yield from microalgae is limited by the upstream cost, which restrain the realization of large-scale biofuel production. The modification of lipid-rich microalgae cell has become the focus over the last few decades to improve the lipid content and productivity of microalgae. Carbon is a vital nutrient that regulates the growth and metabolism of microalgae. Different carbon sources are assimilated by microalgae cells via different pathways. Inorganic carbon sources are mainly used through the CO₂-concentrating mechanisms (CCMs), while organic carbon sources are absorbed by microalgae mainly through the Pentose Phosphate (PPP) Pathway and the Embden-Meyerhof-Pranas (EMP) pathway. Therefore, the addition of carbon source has a significant impact on the production of microalgae biomass and lipid accumulation. In this paper, mechanisms of lipid synthesis and carbon uptake of microalgae were introduced, and the effects of different carbon conditions (types, concentrations, and addition methods) on lipid accumulation in microalgal biomass production and biodiesel production were comprehensively discussed. This review also highlights the recent advances in microalgae lipid cultivation with large-scale commercialization and the development prospects of biodiesel production. Current challenges and constructive suggestions are proposed on cost-benefit concerns in large-scale production of microalgae biodiesel.

The Overexpression of YALI0B07117g Results in Enhanced Erythritol Synthesis from Glycerol by the Yeast Yarrowia lipolytica

The unconventional yeast Yarrowia lipolytica is used to produce erythritol from glycerol. In this study, the role of the erythrose reductase (ER) homolog YALI0B07117g in erythritol synthesis was analyzed. The deletion of the gene resulted in an increased production of mannitol (308%) and arabitol (204%) before the utilization of these polyols began. The strain overexpressing the YALI0B07117g gene was used to increase the erythritol yield from glycerol as a sole carbon source in batch cultures, resulting in a yield of 0.4 g/g. The specific consumption rate (qs) increased from 5.83 g/g/L for the WT strain to 8.49 g/g/L for the modified strain and the productivity of erythritol increased from 0.28 g/(L h) for the A101 strain to 0.41 g/(L h) for the modified strain. The application of the research may prove positive for shortening the cultivation time due to the increased rate of consumption of the substrate combined with the increased parameters of erythritol synthesis.

Effect of Metabolic Regulators and Aeration on Isocitric Acid Synthesis by Yarrowia lipolytica Grown on Ester-Aldehyde Fraction

Isocitric acid (ICA) has found wide application in medicine as a promising compound with powerful antioxidant activity to combat oxidative stress. In the known microbiological processes of ICA production by non-conventional yeast Yarrowia lipolytica, the pure carbon sources are commonly used. ICA can be also synthetized by Y. lipolytica from ester-aldehyde fraction (EAF)-waste of the ethanol production process. A highly effective method of ICA production from EAF based on regulation of key enzymes (aconitate hydratase and isocitrate lyase) by metabolic regulators (iron and itaconic acid) and aeration was developed. It is recommended to cultivate Y. lipolytica VKM Y-2373 under nitrogen deficiency conditions, a high aeration (60% of air saturation), an addition of 15 mM itaconic acid, and 2.4 mg/L iron. Under optimal conditions, Y. lipolytica VKM Y-2373 produced 83 g/L ICA with isocitrate to citrate ratio of 4.1:1 and mass yield of 1.1 g/g. The putative mechanism of ICA overproduction from EAF by Y. lipolytica was suggested.

Increased Lipid Production in Yarrowia lipolytica from Acetate through Metabolic Engineering and Cosubstrate Fermentation

Bioconversion of acetate, a byproduct generated in industrial processes, into microbial lipids using oleaginous yeasts offers a promising alternative for the economic utilization of acetate-containing waste streams. However, high acetate concentrations will inhibit microbial growth and metabolism. In this study, the acetate utilization capability of Yarrowia lipolytica PO1f was successively improved by overexpressing the key enzyme of acetyl-CoA synthetase (ACS), which resulted in an accumulation of 9.2% microbial lipids from acetate in shake flask fermentation. By further overexpressing the second key enzymes of acetyl-CoA carboxylase (ACC1) and fatty acid synthase (FAS) in Y. lipolytica, the lipid content was increased to 25.7% from acetate. Finally, the maximum OD₆₀₀ of 29.2 and a lipid content of 41.7% were obtained with the engineered strain by the adoption of cosubstrate (glycerol and acetate) fed-batch fermentation, which corresponded to an increase of 68 and 95%, respectively. These results presented a promising strategy for economic and efficient microbial lipid production from the waste acetate.

Engineering Yarrowia lipolytica to produce fuels and chemicals from xylose: A review

The production of chemicals and fuels from lignocellulosic biomass has great potential industrial applications due to its economic feasibility and environmental attractiveness. However, the utilized microorganisms must be able to use all the sugars present in lignocellulosic hydrolysates, especially xylose, the second most plentiful monosaccharide on earth. Yarrowia lipolytica is a good candidate for producing various valuable products from biomass, but this yeast is unable to catabolize xylose efficiently. The development of metabolic engineering facilitated the application of Y. lipolytica as a platform for the bioconversion of xylose into various value-added products. Here, we reviewed the research progress on natural xylose-utilization pathways and their reconstruction in Y. lipolytica. The progress and emerging trends in metabolic engineering of Y. lipolytica for producing chemicals and fuels are further introduced. Finally, challenges and future perspectives of using lignocellulosic hydrolysate as substrate for Y. lipolytica are discussed.

Reprogramming Escherichia coli Metabolism for Bioplastics Synthesis from Waste Cooking Oil

The recycle and reutilization of food wastes is a promising alternative for supporting and facilitating circular economy. However, engineering industrially relevant model organisms to use food wastes as their sole carbon source has remained an outstanding challenge so far. Here, we reprogrammed Escherichia coli metabolism using modular pathway engineering followed by laboratory adaptive evolution to establish a strain that can efficiently utilize waste cooking oil (WCO) as the sole carbon source to produce monomers of bioplastics, namely, medium-chain α,ω-dicarboxylic acids (MCDCAs). First, the biosynthetic pathway of MCDCAs was designed and rewired by modifying the β-oxidation pathway and introducing an ω-oxidation pathway. Then, metabolic engineering and laboratory adaptive evolution were applied for improving the pathway efficiency of fatty acids utilization. Finally, the engineered strain E. coli AA0306 was able to produce 15.26 g/L MCDCAs with WCO as the sole carbon source. This study provides an economically attractive strategy for biomanufacturing bioplastics from food wastes, which has a great potentiality to be developed as a wide range of enabling biotechnologies for achieving green revolution.

Isocitric Acid Production from Ethanol Industry Waste by Yarrowia lipolytica

There is ever increasing evidence that isocitric acid can be used as a promising compound with powerful antioxidant activity to combat oxidative stress. This work demonstrates the possibility of using waste product from the alcohol industry (so-called ester-aldehyde fraction) for production of isocitric acid by yeasts. The potential producer of isocitric acid from this fraction, Yarrowia lipolytica VKM Y-2373, was selected by screening of various yeast cultures. The selected strain showed sufficient growth and good acid formation in media with growth-limiting concentrations of nitrogen, sulfur, phosphorus, and magnesium. A shortage of Fe2+ and Ca2+ ions suppressed both Y. lipolytica growth and formation of isocitric acid. The preferential synthesis of isocitric acid can be regulated by changing the nature and concentration of nitrogen source, pH of cultivation medium, and concentration of ester-aldehyde fraction. Experiments in this direction allowed us to obtain 65 g/L isocitric acid with a product yield (YICA) of 0.65 g/g in four days of cultivation.

Glycerol waste to value added products and its potential applications

The rapid industrial and economic development runs on fossil fuel and other energy sources. Limited oil reserves, environmental issues, and high transportation costs lead towards carbon unbiased renewable and sustainable fuel. Compared to other carbon-based fuels, biodiesel is attracted worldwide as a biofuel for the reduction of global dependence on fossil fuels and the greenhouse effect. During biodiesel production, approximately 10% of glycerol is formed in the transesterification process in a biodiesel plant. The ditching of crude glycerol is important as it contains salt, free fatty acids, and methanol that cause contamination of soil and creates environmental challenges for researchers. However, the excessive cost of crude glycerol refining and market capacity encourage the biodiesel industries for developing a new idea for utilising and produced extra sources of income and treat biodiesel waste. This review focuses on the significance of crude glycerol in the value-added utilisation and conversion to bioethanol by a fermentation process and describes the opportunities of glycerol in various applications.

Graphic abstract

Citric Acid Production of Yeasts: An Overview

Background

Citric acid, an intermediate product of the Krebs cycle, has a wide usage area in the food industry since it has some functions such as acidulant, flavouring agent, preservative and antioxidant. Although molds are the most commonly used microorganisms in the citric acid production, it is known that there are significant advantages of using yeasts.

Purpose and scope

The microbial citric acid production mechanism needs to be well understood to make production more efficient. In this study, the yeasts used in the production, fermentation types and the factors affecting production were reviewed with studies.

Methodology

Although production of citric acid can be produced by chemical synthesis, the fermentation is preferred because of its low cost and ease of use. More than 90% of citric acid produced in the world is obtained by fermentation.

Results

Yarrowia lipolytica, Candida zeylanoides and Candida oleophila are evaluated for citric acid production with substrates such as molasses, glucose, sucrose and glycerol. On the other hand, there is great interest in developing processes with new substrates and/ or microorganisms.

Conclusion

Although the microbial strain is an important factor, the factors such as carbon, phosphorus and nitrogen sources, aeration, the presence of trace elements and pH are also parameters affecting the production.

Oleaginous Yeasts as Cell Factories for the Sustainable Production of Microbial Lipids by the Valorization of Agri-Food Wastes

The agri-food industry annually produces huge amounts of crops residues and wastes, the suitable management of these products is important to increase the sustainability of agro-industrial production by optimizing the entire value chain. This is also in line with the driving principles of the circular economy, according to which residues can become feedstocks for novel processes. Oleaginous yeasts represent a versatile tool to produce biobased chemicals and intermediates. They are flexible microbial factories able to grow on different side-stream carbon sources such as those deriving from agri-food wastes, and this characteristic makes them excellent candidates for integrated biorefinery processes through the production of microbial lipids, known as single cell oils (SCOs), for different applications. This review aims to present an extensive overview of research progress on the production and use of oleaginous yeasts and present discussions on the current bottlenecks and perspectives of their exploitation in different sectors, such as foods, biofuels and fine chemicals.

Microbial engineering for the production of C2-C6 organic acids

Covering: up to the end of 2020Organic acids, as building block compounds, have been widely used in food, pharmaceutical, plastic, and chemical industries. Until now, chemical synthesis is still the primary method for industrial-scale organic acid production. However, this process encounters some inevitable challenges, such as depletable petroleum resources, harsh reaction conditions and complex downstream processes. To solve these problems, microbial cell factories provide a promising approach for achieving the sustainable production of organic acids. However, some key metabolites in central carbon metabolism are strictly regulated by the network of cellular metabolism, resulting in the low productivity of organic acids. Thus, multiple metabolic engineering strategies have been developed to reprogram microbial cell factories to produce organic acids, including monocarboxylic acids, hydroxy carboxylic acids, amino carboxylic acids, dicarboxylic acids and monomeric units for polymers. These strategies mainly center on improving the catalytic efficiency of the enzymes to increase the conversion rate, balancing the multi-gene biosynthetic pathways to reduce the byproduct formation, strengthening the metabolic flux to promote the product biosynthesis, optimizing the metabolic network to adapt the environmental conditions and enhancing substrate utilization to broaden the substrate spectrum. Here, we describe the recent advances in producing C₂-C₆ organic acids by metabolic engineering strategies. In addition, we provide new insights as to when, what and how these strategies should be taken. Future challenges are also discussed in further advancing microbial engineering and establishing efficient biorefineries.

Effects of Medium Components on Isocitric Acid Production by Yarrowia lipolytica Yeast

The microbiological production of isocitric acid (ICA) is more preferable for its application in medicine and food, because the resulting product contains only the natural isomer—threo-DS. The aim of the present work was to study ICA production by yeast using sunflower oil as carbon source. 30 taxonomically different yeast strains were assessed for their capability for ICA production, and Y. lipolytica VKM Y-2373 was selected as a promising producer. It was found that ICA production required: the limitation of Y. lipolytica growth by nitrogen, phosphorus, sulfur or magnesium, and an addition of iron, activating aconitate hydratase, a key enzyme of isocitrate synthesis. Another regulatory approach capable to shift acid formation to a predominant ICA synthesis is the use of inhibitors (itaconic and oxalic acids), which blocks the conversion of isocitrate at the level of isocitrate lyase. It is recommended to cultivate Y. lipolytica VKM Y-2373 under nitrogen deficiency conditions with addition of 1.5 mg/L iron and 30 mM itaconic acid. Such optimized nutrition medium provides 70.6 g/L ICA with a ratio between ICA and citric acid (CA) equal 4:1, a mass yield (YICA) of 1.25 g/g and volume productivity (QICA) of 1.19 g/L·h.

Microbial remediation for the removal of inorganic contaminants from treated wood: Recent trends and challenges

Owing to the seriousness of the ecological risk and human hazard of inorganic wood preservatives, their effective removal was gradually recognized. This paper details different types of wood preservatives, their perniciousness, and their potential removal alternatives, while the wood treatment process is briefly described. Among decontamination methods, microbial remediation is considered as an environmentally friendly approach with enormous potentialities over the conventional treatments. In the current review, the mechanism of bioremediation is summed up and recent advances, challenges, and future perspectives of microbial remediation are discussed. The removal of heavy metals from treated wood requires a combination of various technologies to obtain higher performance. Meanwhile, the decontaminated wood generated through bioremediation can be effectively reused.

Physiological Characterization of a Novel Wild-Type Yarrowia lipolytica Strain Grown on Glycerol: Effects of Cultivation Conditions and Mode on Polyols and Citric Acid Production

A new yeast wild-type Yarrowia lipolytica isolate presented efficient growth on glycerol. During flask cultures, nitrogen limitation led to the secretion of sugar-alcohols as the major metabolites of the process (mannitol, arabitol and erythritol), whereas insignificant quantities of citrate were synthesized. Although in some instances high initial glycerol concentrations were employed (≈150 g/L), remarkable glycerol assimilation and polyol secretion was observed. Total polyols ≈ 52 g/L (conversion yield on glycerol consumed = 0.43 g/g) was recorded in the flask experiments. The sugar-alcohol production bioprocess was successfully simulated with the aid of a modified Velhlust–Aggelis model that fitted very well with the experimental data, while optimized parameter values seemed to be quite consistent. In bioreactor trials, a noticeable metabolic shift towards citric acid production was observed, while simultaneously insignificant polyol quantities were produced. In fed-batch bioreactor experiments, a total citric acid quantity ≈ 102 g/L was recorded—one of the highest in the literature for wild-type Y. lipolytica strains. This metabolic transition was due to higher oxygen saturation into the medium that occurred in the bioreactor experiments compared with the flasks. Cellular lipids produced in the bioreactor trial contained higher concentrations of unsaturated fatty acids compared with those produced in flasks.

Metabolic engineering for increased lipid accumulation in Yarrowia lipolytica - A Review

Current energy security and climate change policies encourage the development and utilization of bioenergy. Oleaginous yeasts provide a particularly attractive platform for the sustainable production of biofuels and industrial chemicals due to their ability to accumulate high amounts of lipids. In particular, microbial lipids in the form of triacylglycerides (TAGs) produced from renewable feedstocks have attracted considerable attention because they can be directly used in the production of biodiesel and oleochemicals analogous to petrochemicals. As an oleaginous yeast that is generally regarded as safe, Yarrowia lipolytica has been extensively studied, with large amounts of data on its lipid metabolism, genetic tools, and genome sequencing and annotation. In this review, we highlight the newest strategies for increasing lipid accumulation using metabolic engineering and summarize the research advances on the overaccumulation of lipids in Y. lipolytica. Finally, perspectives for future engineering approaches are proposed.

Highly Effective, Regiospecific Hydrogenation of Methoxychalcone by Yarrowia lipolytica Enables Production of Food Sweeteners

We describe the impact of the number and location of methoxy groups in the structure of chalcones on the speed and efficiency of their transformation by unconventional yeast strains. The effect of substrate concentration on the conversion efficiency in the culture of the Yarrowia lipolytica KCh 71 strain was tested. In the culture of this strain, monomethoxychalcones (2′-hydroxy-2″-, 3″- and 4″-methoxychalcone) were effectively hydrogenated at over 40% to the specific dihydrochalcones at a concentration of 0.5 g/L of medium after just 1 h of incubation. A conversion rate of over 40% was also observed for concentrations of these compounds of 1 g/L of medium after three hours of transformation. As the number of methoxy substituents increases in the chalcone substrate, the rate and efficiency of transformation to dihydrochalcones decreased. The only exception was 2′-hydroxy-2″,5″-dimethoxychalcone, which was transformed into dihydrochalcone by strain KCh71 with a yield comparable to that of chalcone containing a single methoxy group.

Production of tailor-made fatty acids from crude glycerol at low pH by Yarrowia lipolytica

Nowadays, single cell oil (SCO) can play two distinct roles, first as a supplier of functional oils, and second as a feedstock for the biodiesel industry. These two distinct functions require a different fatty acids (FA) profile in the lipid pool. Moreover, to exploit their potential for industrialization, it is necessary to employ a low-cost substrate. Crude glycerol is the main side-product of biodiesel production. This renewable feedstock is one of Yarrowia lipolytica favorable substrates. In this study we improved polyunsaturated fatty acids (PUFA) synthesis by overexpression of the glycerol phosphate acyltransferase gene (SCT1). Here, we established a method to alter the quantity and FA composition of SCO. The engineered strain showed a 10-fold improvement (>20%) in linoleic acid synthesis (C18:2) in a shake-flask experiment. In a fermenter study co-overexpression of glycerol kinase (GUT1) and SCT1 allowed for 3-fold improvement in C18:2 synthesis from crude glycerol and at low pH.

Overexpression of Citrate Synthase Increases Isocitric Acid Biosynthesis in the Yeast Yarrowia lipolytica

Yarrowia lipolytica is a non-conventional yeast producing valuable compounds, such as citric acids, from renewable raw materials. This study investigated the impact of citrate synthase overexpression on the biosynthesis of citric and isocitric acid in Y. lipolytica. Two transformants of Y. lipolytica A101.1.31 strain (efficient citric acid producer), overexpressing CIT1 or CIT2 gene (encoding proteins with citrate synthase activity), were constructed. The results revealed that overexpression of either of these genes enhances citrate synthase activity. Additionally, the cit1 knockout strain was unable to use propionate as the sole carbon source, which proves that CIT1 gene encodes a dual activity protein–citrate and 2-methylcitrate synthase. In the overexpressing mutants, a significant increase in isocitric acid biosynthesis was observed. Both CIT1 and CIT2 overexpressing strains produced citric and isocitric acid from vegetable oil in a ratio close to 1 (CA/ICA ratio for wild-type strain was 4.12).

Nitrogen as the major factor influencing gene expression in Yarrowia lipolytica

Yarrowia lipolytica is an important industrial microorganism used for the production of oleochemicals. The design of effective biotechnological processes with this cell factory requires an in-depth knowledge of its metabolism. Here we present a transcriptomic study of Y. lipolytica grown in the presence of glycerol and glucose, and mixture of both at different carbon to nitrogen ratios. It emerged that the transcriptomic landscape of Y. lipolytica is more sensitive to the nitrogen availability than to the utilized carbon source, as evidenced by more genes being differentially expressed in lower carbon to nitrogen ratio. Specifically, expression of hexokinase (HXK1) is significantly susceptible to changes in nitrogen concentrations. High HXK1 expression in low nitrogen seems to impact other genes which are implicated in tricarboxylic acid cycle and erythritol biosynthesis. We further show that expression of HXK1 and two genes belonging to the sugar porter family might be controlled by GATA-like zinc-finger proteins.

Effect of utilization of crude glycerol as substrate on fatty acid composition of an oleaginous yeast Rhodotorula mucilagenosa IIPL32: Assessment of nutritional indices

This work studied the use of crude glycerol obtained from biodiesel industry as substrate to generate yeast lipid from Rhodotorula mucilagenosa IIPL32 MTCC 25056. Crude glycerol is a low value by product obtained from biodiesel industry. Rhodotorula mucilagenosa IIPL32 MTCC 25056 was evaluated for its potential to produce lipid using crude glycerol as sole source of carbon. Under nitrogen limiting condition a lipid and biomass content of 5.6 g/L and19.7 g/L were obtained from crude glycerol. The fatty acid profile was found to be interestingly rich in oleic acid (61.88%), linoleic acid (16.17%) and linolenic acid (1.03%) comprising ~80% of MUFA and PUFA of total lipid. Further, evaluations were attempted to compare MUFA rich yeast lipid against different plant-borne edible oils commonly used in India. In this study, nutritional indices were calculated to check feasibility of using yeast oil as a plausible blend to edible oil.