Extraction and characterization of stratified extracellular polymeric substances in Geobacter biofilms

Deciphering the role of extracellular polymeric substances in the adsorption and biotransformation of organic micropollutants during anaerobic wastewater treatment

Extracellular polymeric substances (EPS) participate in the removal of organic micropollutants (OMPs), but the primary pathways of removal and detailed mechanisms remain elusive. We evaluated the effect of EPS on removal for 16 distinct chemical classes of OMPs during anaerobic digestion (AD). The results showed that hydrophobic OMPs (HBOMPs) could not be removed by EPS, while hydrophilic OMPs (HLOMPs) were amenable to removal via adsorption and biotransformation of EPS. The adsorption and biotransformation of HLOMPs by EPS accounted up to 19.4 ± 0.9 % and 6.0 ± 0.8 % of total removal, respectively. Further investigations into the adsorption and biotransformation mechanisms of HLOMPs by EPS were conducted utilizing spectral, molecular dynamics simulation, and electrochemical analysis. The results suggested that EPS provided abundant binding sites for the adsorption of HLOMPs. The binding of HLOMPs to tryptophan-like proteins in EPS formed nonfluorescent complexes. Hydrogen bonds, hydrophobic interactions and water bridges were key to the binding processes and helped stabilize the complexes. The biotransformation of HLOMPs by EPS may be attributed to the presence of extracellular redox active components (c-type cytochromes (c-Cyts), c-Cyts-bound flavins). This study enhanced the comprehension for the role of EPS on the OMPs removal in anaerobic wastewater treatment.

The interplay of hematite and photic biofilm triggers the acceleration of biotic nitrate removal

The soil-water interface is replete with photic biofilm and iron minerals; however, the potential of how iron minerals promote biotic nitrate removal is still unknown. This study investigates the physiological and ecological responses of photic biofilm to hematite (Fe2O3), in order to explore a practically feasible approach for in-situ nitrate removal. The nitrate removal by photic biofilm was significantly higher in the presence of Fe2O3 (92.5%) compared to the control (82.8%). Results show that the presence of Fe2O3 changed the microbial community composition of the photic biofilm, facilitates the thriving of Magnetospirillum and Pseudomonas, and promotes the growth of photic biofilm represented by the extracellular polymeric substance (EPS) and the content of chlorophyll. The presence of Fe2O3 also induces oxidative stress (•O2-) in the photic biofilm, which was demonstrated by electron spin resonance spectrometry. However, the photic biofilm could improve the EPS productivity to prevent the entrance of Fe2O3 to cells in the biofilm matrix and mitigate oxidative stress. The Fe2O3 then promoted the relative abundance of Magnetospirillum and Pseudomonas and the activity of nitrate reductase, which accelerates nitrate reduction by the photic biofilm. This study provides an insight into the interaction between iron minerals and photic biofilm and demonstrates the possibility of combining biotic and abiotic methods to improve the in-situ nitrate removal rate.

Differentiation and quantification of extracellular polymeric substances from microalgae and bacteria in the mixed culture

Extracellular polymeric substances (EPS) play significant roles in the formation, function, and interactions of microalgal-bacteria consortia. Understanding the key roles of EPS depends on reliable extraction and quantification methods, but differentiating of EPS from microalgae versus bacteria is challenging. In this work, cation exchange resin (CER) and thermal treatments were applied for total EPS extraction from microalgal-bacteria mixed culture (MBMC), flow cytometry combined with SYTOX Green staining was applied to evaluate cell disruption during EPS extraction, and auto-fluorescence-based cell sorting (AFCS) was used to separate microalgae and bacteria in the MBMC. Thermal extraction achieved much higher EPS yield than CER, but higher temperature and longer time reduced cell activity and disrupted the cells. The highest EPS yield with minimal loss of cell activity and cell disruption was achieved using thermal extraction at 55℃ for 30 min, and this protocol gave good results for MBMC with different microalgae:bacteria (M:B) mass ratios. AFCS combined with thermal treatment achieved the most-efficient biomass differentiation and low EPS loss (<4.5 %) for the entire range of M:B ratios. EPS concentrations in bacteria were larger than in microalgae: 42.8 ± 0.4 mg COD/g TSS versus 9.19 ± 0.38 mg COD/g TSS. These findings document sensitive and accurate methods to extract and quantify EPS from microalgal-bacteria aggregates.

Bidirectional extracellular electron transfer pathways of Geobacter sulfurreducens biofilms: Molecular insights into extracellular polymeric substances

The basis for bioelectrochemical technology is the capability of electroactive bacteria (EAB) to perform bidirectional extracellular electron transfer (EET) with electrodes, i.e. outward- and inward-EET. Extracellular polymeric substances (EPS) surrounding EAB are the necessary media for EET, but the biochemical and molecular analysis of EPS of Geobacter biofilms on electrode surface is largely lacked. This study constructed Geobacter sulfurreducens-biofilms performing bidirectional EET to explore the bidirectional EET mechanisms through EPS characterization using electrochemical, spectroscopic fingerprinting and proteomic techniques. Results showed that the inward-EET required extracellular redox proteins with lower formal potentials relative to outward-EET. Comparing to the EPS extracted from anodic biofilm (A-EPS), the EPS extracted from cathodic biofilm (C-EPS) exhibited a lower redox activity, mainly due to a decrease of protein/polysaccharide ratio and α-helix content of proteins. Furthermore, less cytochromes and more tyrosine- and tryptophan-protein like substances were detected in C-EPS than in A-EPS, indicating a diminished role of cytochromes and a possible role of other redox proteins in inward-EET. Proteomic analysis identified a variety of redox proteins including cytochrome, iron-sulfur clusters-containing protein, flavoprotein and hydrogenase in EPS, which might serve as an extracellular redox network for bidirectional EET. Those redox proteins that were significantly stimulated in A-EPS and C-EPS might be essential for outward- and inward-EET and warranted further research. This work sheds light on the mechanism of bidirectional EET of G. sulfurreducens biofilms and has implications in improving the performance of bioelectrochemical technology.

Extracellular polymeric substances in electroactive biofilms play a crucial role in improving the efficiency of microbial fuel and electrolysis cells

In microbial electrochemical cells (MECs), electroactive microbial biofilms can transmit electrons from organic molecules to anodes. To further understand the production of anodic biofilms, it is essential to investigate the composition and distribution of extracellular polymeric substance (EPS) in the MECs. In this study, the structure of EPS was examined in microbial electrolysis cells from mixed cultures forming biofilm using carbon fiber fabric anode. EPS was extracted from the anode biofilm of microbial electrolysis cells inoculated with mixed microbial culture. The anode biofilm yielded 0.4 mg of EPS, of which 51.2% was humic substance, 16.2% was protein, 12.6% was carbohydrates, and 20% consisted of undetermined substances. Using epifluorescence microscopy, the composition of bacterial cells and their location inside EPS were studied, and the distribution of microbial communities was compared based on current density results in the presence of various carbohydrates. On the electrode surface, bacteria and EPS gathered or overlapped in various locations can affect microbial electrochemical performance. Our findings showed that EPS formation in electroactive biofilms would be important for enhanced efficiency of electricity- or hydrogen-producing microbial electrolysis cells.

Electron syntrophy between mixed hydrogenogens and Geobacter metallireducens boosted dark hydrogen fermentation: Clarifying roles of electroactive extracellular polymeric substances

To modulate the electron transfer behavior of hydrogen-producing bacteria (HPB) for enhanced hydrogen production, Geobacter metallireducens culture (GM) was introduced as an electron syntrophy partner and redox balance regulator in dark fermentation systems with hydrogen-producing sludge (HPS) as inoculum. The highest hydrogen yield was 306.5 mL/g-COD at the GM/HPS volatile solids ratio of 0.08, which was 65.2 % higher than the HPS group. The multi-layered extracellular polymeric substances (EPS) of GM played a significant role in promoting hydrogen production, with c-type cytochromes probably serving as electroactive functional components. The addition of GM significantly improved the NADH/NAD+ ratio, electron transport system activity, hydrogenase activity, and electrochemical properties of HPS. Furthermore, the microbial community structure and metabolic functions were optimized due to the potential syntrophic interaction between Clostridium sensu stricto (dominant HPB) and Geobacter, thus promoting hydrogen production. This study provided novel insights into the interactions among exoelectrogens, electroactive EPS, and mixed HPB.

Role of KOH-activated biochar on promoting anaerobic digestion of biomass from Pennisetumgianteum

Pennisetum giganteum is a promising non-food crop feedstock for biogas production due to its high productivity and bio-methane potential. However, the accumulation of volatile fatty acids (VFA) usually restricts the conversion efficiency of P. giganteum biomass (PGB) during anaerobic digestion (AD). Here, the role of KOH-activated biochar (KB) in improving the AD efficiency of PGB and the related mechanisms were investigated in detail. The results revealed that KB exhibited excellent electrical conductivity, electron transfer capacity and specific capacitance, which might be related to the decrease in the electron transfer resistance after adding KB to the AD process. In addition, the KB addition not only reinforced metabolisms of energy and VFAs but also promoted the conversion of VFAs to methane, leading to a 52% increase in the methane production rate. Bioinformatics analysis showed that Smithella and Methanosaeta were key players in the KB-mediated AD process of PGB. The stimulatory effect of methanogenesis probably resulted from the establishment of direct interspecies electron transfer (DIET) between VFA-oxidizing acetogens (e.g., Smithella) and Methanosaeta. These findings provided a key step to improve the PGB-based AD process.

The role of extracellular polymeric substances (EPS) in chemical-degradation of persistent organic pollutants in soil: A review

Persistent organic pollutants (POPs) in soil show high environmental risk due to their high toxicity and low biodegradability. Studies have demonstrated the degradation function of microbial extracellular polymeric substances (EPS) on POPs in various matrices. However, the degradation mechanisms and the factors that influence the process in soil have not been clearly illustrated. In this review, the characteristics of EPS were introduced and the possible mechanisms of EPS on degradation of organic pollutants (e.g., external electron transfer, photodegradation, and enzyme catalysis) were comprehensively discussed. In addition, the environmental conditions (e.g., UV, nutrients, and redox potential) that could influence the production and degradation-related active components of EPS were addressed. Moreover, the current approaches on the application of EPS in biotechnology were summarized. Further, the future perspectives of enhancement on degradation of POPs by regulating EPS were discussed. Overall, this review could provide a new thought on remediation of POPs by widely-existing EPS in soil with low-cost and minimized eco-disturbance.

Electrically-assisted anaerobic digestion under ammonia stress: Facilitating propionate oxidation and activating methanogenesis via direct interspecies electron transfer

Electrical assistance is an effective strategy for promoting anaerobic digestion (AD) under ammonia stress. However, the underlying mechanism of electrical assistance affecting AD is insufficiently understood. Here, electrical assistance to AD under 5 g N/L ammonia stress was provided, by employing a 0.6 V voltage to the carbon electrodes. The results demonstrated remarkable enhancements in methane production (104.6 %) and the maximal methane production rate (207.7 %). The critical segment facilitated by electro-stimulation was the microbial metabolism of propionate-to-methane, rather than ammonia removal. Proteins in extracellular polymer substances were enriched, boosting microbial resilience to ammonia intrusion. Concurrently, the promoted humic/fulvic-substances amplified the microbial electron transfer capacity. Metagenomics analysis identified the upsurge of propionate oxidation at the anode (by e.g. unclassified_c__Bacteroidia), and the stimulations of acetoclastic and direct interspecies electron transfer-dependent CO2-reducing methanogenesis at the cathode (by e.g. Methanothrix). This study provides novel insights into the effect of electrical assistance on ammonia-stressed AD.

Selenium bio-nanocomposite based on extracellular polymeric substances (EPS): Synthesis, characterization and application in alleviating cadmium toxicity in rice (Oryza sativa L.)

Selenium nanoparticles (SeNPs) have gained significant attention owing to their favorable bioavailability and low toxicity, making them widely applications in the fields of medicine, food and agriculture. In this study, bacterial extracellular polymeric substances (EPS) were used as a novel stabilizer and capping agent to prepare dispersed SeNPs. Results show that EPS-SeNPs presented negative potential (-38 mV), spherical morphologies with average particle size about 100-200 nm and kept stable at room temperature for a long time. X-ray diffraction (XRD) analysis demonstrated that the synthesized nanoparticles were pure amorphous nanoparticles, and X-ray photoelectron spectroscopy (XPS) spectrum showed a spike at 55.6 eV, indicating the presence of zero-valent nano‑selenium. Fourier-transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3D-EEM) fluorescence spectroscopy analysis confirmed proteins and polysaccharides in EPS played a crucial role in the synthesis of EPS-SeNPs. Compared to EPS or sodium selenite (Na2SeO3), EPS-SeNPs showed a relatively moderate result in terms of scavenging free radicals in vitro. In contrast, EPS-SeNPs demonstrated lower toxicity to rice seeds than Na2SeO3. Notably, the exogenous application of EPS-SeNPs effectively alleviated the growth inhibition and oxidative damaged caused by cadmium (Cd), and significantly reduced Cd accumulation in rice plants.

Co-NC@Co-NP hierarchical nanoforest steering charge exchange efficiency at biotic-abiotic interface for microbial electrochemical carbon reduction

Converting anthropogenic carbon dioxide (CO2) to value-added products using bio-electrochemical conversions represents a promising strategy for producing sustainable fuel. However, the reaction kinetics are hindered by insufficient attachment of microorganisms and limited charge extraction at the bioinorganic interface. A hierarchical nanoforest with doped cobalt‑nitrogen-doped carbon covering cobalt nanoparticle (Co-NC@Co-NP) was integrated with a CO2-to-CH4 conversion microbiome for methane production to address these shortcomings. In-situ nanoforests were developed on the nanosheet by chemical vapor deposition with Co nanoparticles catalyzed. The bio-nanowire-like carbon nanotubes enhanced the electrostatic force for microbe enrichment via the tip effect, providing a maximum of 3.6-fold electron-receiving microbes to utilize reducing equivalents. The Co-NC@Co-NP enhanced the direct electron transfer between microbes and electrodes, reducing the adoption of energy barriers for heme-like proteins. Thus, the optimized electron transfer pathway improved selectivity by a factor of 2.0 compared to the pristine nanosheet biohybrid. Furthermore, the adjusted microbial community structure provided sufficient methanogenesis genes to match the strong electron flow, achieving maximal methane production rates (311.1 mmol/m2/day at -0.9 V vs. Ag/AgCl), 8.62 times higher than those of the counterpart nanosheet biohybrid (36.06 mmol/m2/day). This work demonstrates a comprehensive assessment of biotic-abiotic energy transfer, which may serve as a guiding principle for designing efficient bio-electrochemical systems.

Insight into the enhancing mechanism of exogenous electron mediators on biological denitrification in microbial electrolytic cell

Sustained nitrate accumulation in surface water ecosystem was continuously grabbing public attention. Autotrophic denitrification by electron supplement has been applied to overcome the requirement of carbon source, thus the new problem that how to improve the efficiency of extracellular electrons transfer to denitrifiers comes to us. The addition of exogenous electron mediators has been considered as an important strategy to promote extracellular electrons transfer in reductive metabolism. To date, knowledge is lacking about the promoting effects and pathways in nitrate removal by electron mediators. Here, we fully investigated the performance of nitrogen removal as well as quantified the characteristics of biofilms with six electron mediators (riboflavin, flavin mononucleotide, AQS, AQDS, biochar and Nano-Fe3O4) treating in microbial electrolytic cell system. The six electron mediators promoted nitrate removal rate by 76.03-90.43 % with electron supplement. The growth and activity of cathodic biofilm, conductive nanowires generation and electrochemically active substance synthesis of extracellular polymeric substances were facilitated by electron mediator addition. Electrochemical analysis revealed that conductivity and redox capacity of cathodic biofilm was increased for accelerating electron transfer. Moreover, they upregulated the abundance of denitrifying communities and denitrifying genes accordingly. Their denitrification efficiency varied due to their promotion ability in the above different strategies and conductive characteristics, and the efficiency could be concluded as: Nano-Fe3O4 > riboflavin > flavin mononucleotide > AQS ≈ AQDS > biochar. This study revealed how addition of electron mediators promoted denitrification with electron supplement, and compared their promoting efficiency in several main aspects.

Mechanism of quinone mediators modified polyurethane foam for enhanced nitrobenzene reduction and denitrification

The nitrobenzene (NB) reduction and denitrification performance of the immobilized biofilm (I-BF) reactors based on 9,10-anthraquinone-2-sulfonyl chloride (ASC) modified polyurethane foam (PUF-ASC) carriers were investigated. Experiments demonstrated that the quinone mediators enhanced NB reduction and denitrification performance. The NB reduction rates increased by 1.46, while the NO3--N removal rates increased by 1.55 times in the PUF-0.1ASC system. The quinone mediators promote extracellular polymeric substances (EPS) secretion. Electrochemical tests indicated that quinone mediators enhanced the electron transfer of biofilm systems. NADH generation was accelerated and microbial electron transport system activity (ETSA) was promoted. The abundance of genera with electrochemical activity, NB degradation and denitrification ability (Pseudomonas sp., Diaphorobate sp., and Acinetobacter sp.) increased. Metabolic pathways relating to NO3--N and NB reduction were uploaded. In conclusion, electron acquisition by NO3--N and NB was facilitated, bacterial community structure and metabolic pathways were affected by the quinone mediators.

Role of Nano-Fe3O4 for enhancing nitrate removal in microbial electrolytic cells: Characterizations and microbial patterns of cathodic biofilm

Conductive magnetite nanoparticle (Nano-Fe3O4) can facilitate numerous biological reduction reactions as an outstanding electron mediator for electron transfer. The positive role of Nano-Fe3O4 for nitrate removal has gradually gained attention recent years, however, it has not been clarified for the persistence of the promoting effect under different concentrations addition. Performance of nitrogen removal and characteristics of cathodic biofilm were evaluated in this study after Nano-Fe3O4 addition with gradient concentration of 100∼500 mg L-1 in microbial electrolytic cells (MEC). Our study illustrated that the optimal concentration was 200 mg L-1 as the removal rate of nitrate increased by 24.76% and the removal rate of total dissolved nitrogen by 29.72%. At the optimal concentration, Nano-Fe3O4 increased cathodic biofilm DNA concentration by 61.04%, enhanced electron transport system activity, enriched iron redox bacteria, denitrifying bacteria and genes, as well as increased extracellular polymeric substances (EPS) amount, especially the protein content of soluble-EPS. However, promoting effect on nitrate removal was not visible in high concentration (500 mg L-1) addition, its electron transport system activity and EPS content were even declined. XPS results indicated that high concentration of Nano-Fe3O4 may reduce the availability of electrons to cathodic biofilm by competing for electrons, which inhibit nitrate removal.

The Effect of Organic Matter from Sewage Sludge as an Interfacial Layer on the Surface of Nano-Al and Fluoride

Due to its high reactivity, the nano aluminum particle (n-Al) has attracted more attention in energetic materials but is easily oxidized during processing. In order to realize sewage sludge (SS) resource and n-Al coating, the organic matter was extracted from SS, using the deep eutectic solvent method due to its strong dissolving capacity, and then the organic matter was pretreated by ball milling, which was used as an interfacial layer between n-Al and fluoride. It was found that organic matter was successfully extracted from SS. The main organic matter is proteins. The ball milling method can effectively destroy the secondary structure of proteins to release more active functional groups. During the pretreatment, the Maillard reaction broke the proteins structure to form more active low molecular weight compounds. It was confirmed that n-Al can be coated by PBSP under mild conditions to form a uniform core-shell structure. PFOA can effectively coat the n-Al@PBSP to form n-Al@PBSP/PFOA, which can enhance the combustion of n-Al. The gas phase flame temperature can notably improve to 2892 K. The reaction mechanism between n-Al and coating was analyzed. The results could help SS treatment and provide new insights for n-Al coating and SS-based organic matter recovery and utilization.

Extracellular polymeric substances sustain photoreduction of Cr(VI) by Shewanella oneidensis-CdS biohybrid system

Photosensitized biohybrid system (PBS) enables bacteria to exploit light energy harvested by semiconductors for rapid pollutants transformation, possessing a promising future for water reclamation. Maintaining a biocompatible environment under photocatalytic conditions is the key to developing PBS-based treatment technologies. Natural microbial cells are surrounded by extracellular polymeric substances (EPS) that either be tightly bound to the cell wall (i.e., tightly bound EPS, tbEPS) or loosely associated with cell surface (i.e., loosely bound EPS, lbEPS), which provide protection from unfavorable environment. We hypothesized that providing EPS fractions can enhance bacterial viability under adverse environment created by photocatalytic reactions. We constructed a model PBS consisting of Shewanella oneidensis and CdS using Cr(VI) as the target pollutant. Results showed complete removal of 25 mg/L Cr(VI) within 90 min without an electron donor, which may mainly rely on the synergistic effect of CdS and bacteria on photoelectron transfer. Long-term cycling experiment of pristine PBS and PBS with extra EPS fractions (including lbEPS and tbEPS) for Cr(VI) treatment showed that PBS with extra lbEPS achieved efficient Cr(VI) removal within five consecutive batch treatment cycles, compared to the three cycles both in pristine PBS and PBS with tbEPS. After addition of lbEPS, the accumulation of reactive oxygen species (ROS) was greatly reduced via the EPS-capping effect and quenching effect, and the toxic metal internalization potential was lowered by complexation with Cd and Cr, resulting in enhanced bacterial viability during photocatalysis. This facile and efficient cytoprotective method helps the rational design of PBS for environmental remediation.

The role of bacterial exopolysaccharides (EPS) in the synthesis of antimicrobial silver nanomaterials: A state-of-the-art review

The emergence of multi-drug resistant (MDR) pathogens poses a significant global health concern due to the failure of conventional medical treatment. As a result, the development of several metallic (Ag, Au, Zn, Ti, etc.) nanoparticles, has gained prominence as an alternative to conventional antimicrobial therapies. Among these, green-synthesized silver nanoparticles (AgNPs) have gained significant attention due to their notable efficiency and broad spectrum of antimicrobial activity. Bacterial exopolysaccharides (EPS) have recently emerged as a promising biological substrate for the green synthesis of AgNPs. EPS possess polyanionic functional groups (hydroxyl, carboxylic, sulfate, and phosphate) that effectively reduce and stabilize AgNPs. EPS-mediated AgNPs exhibit a wide range of antimicrobial activity against various pathogenic microbes, including Gram-positive and Gram-negative bacteria, as well as fungi. The extraction and purification of bacterial EPS play a vital role in obtaining high-quality and -quantity EPS for industrial applications. This study focuses on the comprehensive methodology of EPS extraction and purification, encompassing screening, fermentation optimization, pretreatment, protein elimination, precipitation, and purification. The review specifically highlights the utilization of bacterial EPS-mediated AgNPs, covering EPS extraction, the synthesis mechanism of green EPS-mediated AgNPs, their characterization, and their potential applications as antimicrobial agents against pathogens. These EPS-mediated AgNPs offer numerous advantages, including biocompatibility, biodegradability, non-toxicity, and eco-friendliness, making them a promising alternative to traditional antimicrobials and opening new avenues in nanotechnology-based approaches to combat microbial infections.

Sub-inhibitory concentrations of ampicillin affect microbial Fe(III) oxide reduction

Antibiotics are ubiquitous in the iron-rich environments but their roles in microbial reduction of Fe(III) oxides are still unclear. Using ampicillin and Geobacter soli, this study investigated the underlying mechanism by which antibiotic regulated microbial reduction of Fe(III) oxides. Results showed that sub-minimal inhibitory concentrations (sub-MIC) of ampicillin significantly affected ferrihydrite reduction by G. soli, with a stimulatory effect at 1/64 and 1/32 MIC and an inhibitory effect at 1/8 MIC. Increasing ampicillin concentration resulted in increasing cell length and decreasing bacterial zeta potential that were beneficial for ferrihydrite reduction, and decreasing outer membrane permeability that was unfavorable for ferrihydrite reduction. The respiratory metabolism ability was enhanced by 1/64 and 1/32 MIC ampicillin and reduced by 1/8 MIC ampicillin, which was also responsible for regulation of ferrihydrite reduction by ampicillin. The ferrihydrite reduction showed a positive correlation with the redox activity of extracellular polymeric substances (EPS) which was tied to the cytochrome/polysaccharide ratio and the content of α-helices and β-sheet in EPS. These results suggested that ampicillin regulated microbial Fe(III) oxide reduction through modulating the bacterial morphology, metabolism activity and extracellular electron transfer ability. Our findings provide new insights into the environmental factors regulating biogeochemical cycling of iron.

Core Species Derived from Multispecies Interactions Facilitate the Immobilization of Cadmium

Microbial consortia have opened new avenues for heavy-metal remediation. However, the limited understanding of the overall effect of interspecific interactions on remediation efficacy hinders its application. Here, the effects of multispecies growth and biofilm formation on Cd immobilization were explored from direct and multiple interactions through random combinations of two or three rhizosphere bacteria. In monocultures, Cd stress resulted in an average decrease in planktonic biomass of 26%, but through cooperation, the decrease was attenuated in dual (21%) and triple cultures (13%), possibly involving an increase in surface polysaccharides. More than 65% of the co-cultures exhibited induction of biofilm formation under Cd stress, which further enhanced the role of biofilms in Cd immobilization. Notably, excellent biofilm-forming ability or extensive social induction makes Pseudomonas putida and Brevundimonas diminuta stand out in multispecies biofilm formation and Cd immobilization. These two core species significantly increase the colonization of soil microorganisms on rice roots compared to the control, resulting in a 40% decrease in Cd uptake by rice. Our study enhances the understanding of bacterial interactions under Cd stress and provides a novel strategy for adjusting beneficial soil consortia for heavy-metal remediation.

Complete pentachlorophenol biodegradation in a dual-working electrode bioelectrochemical system: Performance and functional microorganism identification

Bioelectrochemical system (BES) can effectively promote the reductive dechlorination of chlorophenols (CPs). However, the complete degradation of CPs with sequential dechlorination and mineralization processes has rarely achieved from the BES. Here, a dual-working electrode BES was constructed and applied for the complete degradation of pentachlorophenol (PCP). Combined with DNA-stable isotope probing (DNA-SIP), the biofilms attached on the anodic and cathodic electrode in the BES were analyzed to explore the dechlorinating and mineralizing microorganisms. Results showed that PCP removal efficiency in the dual-working BES (84% for 21 days) was 4.1 and 4.7 times higher than those of conventional BESs with a single anodic or cathodic working electrode, respectively. Based on DNA-SIP and high-throughput sequencing analysis, the cathodic working electrode harbored the potential dechlorinators (Comamonas, Pseudomonas, Methylobacillus, and Dechlorosoma), and the anodic working enriched the potential intermediate mineralizing bacteria (Comamonas, Stenotrophomonas, and Geobacter), indicating that PCP could be completely degraded under the synergetic effect of these functional microorganisms. Besides, the potential autotrophic functional bacteria that might be involved in the PCP dechlorination were also identified by SIP labeled with ¹³C-NaHCO₃. Our results proved that the dual-working BES could accelerate the complete degradation of PCP and enrich separately the functional microbial consortium for the PCP dechlorination and mineralization, which has broad potential for bioelectrochemical techniques in the treatment of wastewater contaminated with CPs or other halogenated organic compounds.

Alginate-like polymers from full-scale aerobic granular sludge: content, recovery, characterization, and application for cadmium adsorption

Aerobic granular sludge (AGS) is a proven resource for the recovery of biopolymers like alginate-like polymers (ALP). This is the first report on the dynamics of ALP produced by AGS (ALP-AGS) in a full-scale wastewater treatment plant (WWTP), optimization of ALP recovery from AGS, and adsorption of cadmium (Cd²⁺) by ALP. Recovery of ALP was highest when using 120 mL of 0.2 M Na₂CO₃ at 70 °C for 45 min. Seasonal (1.5 years, over 3100 cycles) and intra-cycle changes in ALP-AGS in the WWTP were monitored. The ALP content in AGS increased in the transition period between winter and spring, reaching over 150 mg/g MLSS. In the batch reactor cycle, the ALP-AGS level peaked 2 h after the start of aeration (mean peak level: 120 mg/g MLSS), then decreased about two-fold by the end of the cycle. The ALP-AGS had a small surface area and a lamellar structure with crystalline outgrowths. The optimal conditions of Cd²⁺ adsorption with ALP were a dosage of 7.9 g d.m./L, a pH of 4-8, and an equilibrium time of 60 min. Carboxyl and hydroxyl groups were the key functional groups involved in Cd²⁺ adsorption. According to the Sips model, the maximum Cd²⁺ adsorption capacity of ALP-AGS was 29.5 mg/g d.m., which is similar to that of commercial alginate. AGS is a richer source of ALP than activated sludge, which ensures the cost-effectiveness of ALP recovery and increases the sustainability of wastewater treatment. Information on the chemical properties and yields of ALP from full-scale WWTPs is important for downstream applications with the recovered ALP.

Effects of changes in UV-B radiation levels on biofilm-forming organisms commonly found in cultural heritage surfaces

Accurate measuring and monitoring methods available since the 1980s have shown that the amount of Ultraviolet B (UV-B) radiation reaching the Earth's surface has increased as a result of degradation of the ozone layer. Since the adoption of the Montreal Protocol in 1987, ozone levels have been recovering successfully. However, in the context of the current climate change, other factors such as changes in cloud patterns and an increased incidence of natural disasters (e.g. fires) may be disrupting this recovery. The present study aimed to investigate the effects of different UV-B radiation levels on biofilms colonising heritage monuments. For this purpose, the effects of current UV-B levels on a biofilm composed of Synechocystis sp. (a cyanobacterium), Bracteacoccus minor (a green alga) and Fusarium sp. (a fungus) were compared at three points along a South-North transect: Portugal, Galicia (NW Spain) and Ireland (from highest to lowest UV-B radiation, respectively). Increased levels of UV-B radiation caused changes in the growth, physiological state and composition of subaerial biofilms, with cyanobacteria being more resistant than green algae to high levels of UV-B. A reduction of fungal growth and extracellular polymer substances (EPS) production was also observed, related to the reduction of biofilm aggregation at high UV-B levels.

Response of electroactive biofilms from real wastewater to metal ion shock in bioelectrochemical systems

The electrochemical activity of bioelectrochemical systems (BESs) was proven to be dependent on the stability of electroactive biofilms (EABs), but the response of EABs based on real wastewater to external disturbances is not fully known. Herein, we used real wastewater (beer brewery wastewater) as a substrate for culturing EABs and found that current generation, biomass, redox activity and extracellular polymeric substances (EPS) content in those EABs were lower as compared to EABs cultured with synthetic wastewaters (acetate and glucose). However, the EABs from the beer brewery wastewater showed moderate anti-shock resistance capability. The proteins and humic acid in loosely bound EPS (LB-EPS) exhibited a positive linear relationship with current recovery after Ag⁺ shock, indicating the importance of LB-EPS for protecting the EABs. Fluorescence and Fourier transform infrared spectroscopy integrated with two-dimensional correlation spectroscopy verified that the spectra of the protein-like region of LB-EPS changed considerably under the interference of Ag⁺ concentration and the CO group of humic acid or proteins was mainly responsible for binding with Ag⁺ to attenuate its toxicity to the EABs. This is the first study revealing the underlying molecular mechanism of EABs cultured with real wastewater against external heavy metal shock and provides useful insights into enhancing the application of BESs in future water treatment.

Microbial induced phosphate precipitation accelerate lead mineralization to alleviate nucleotide metabolism inhibition and alter Penicillium oxalicum's adaptive cellular machinery

Microbial-induced phosphate (P) precipitation (MIPP) based on P-solubilizing microorganisms (PSM) is regarded as a promising approach to bioimmobilize environmental lead (Pb). Nevertheless, the underlying changes of Pb²⁺ biotoxicity in PSM during MIPP process were rarely discussed. The current study explored the Pb²⁺ immobilization and metabolic changes in PSM Penicillium oxalicum postexposure to Pb²⁺ and/or tricalcium phosphate (TCP). TCP addition significantly increased soluble P concentrations, accelerated extracellular Pb mineralization, and improved antioxidative enzyme activities in P. oxalicum during MIPP process. Secondary Pb²⁺ biomineralization products were measured as hydroxypyromorphite [Pb₁₀(PO₄)₆(OH)₂]. Using untargeted metabolomic and transcriptomics, we found that Pb²⁺ exposure stimulated the membrane integrity deterioration and nucleotide metabolism obstruction of P. oxalicum. Correspondingly, P. oxalicum could produce higher levels of gamma-aminobutyric acid (GABA) to enhance the adaptive cellular machineries under Pb²⁺ stress. While the MIPP process improved extracellular Pb²⁺ mineralization, consequently alleviating the nucleotide metabolism inhibition and membrane deterioration. Multi-omics results suggested that GABA degradation pathway was stimulated for arginine biosynthesis and TCA cycle after Pb²⁺ mineralization. These results provided new biomolecular information underlying the Pb²⁺ exposure biotoxicities to microorganisms in MIPP before the application of this approach in environmental Pb²⁺ remediation.

Enhanced performance and electron transfer of sulfur-mediated biological process under polyethylene terephthalate microplastics exposure

Microplastics are ubiquitous in estuaries, coasts, sewage and wastewater treatment plants (WWTPs), which could arouse unexpected effects on critical microbial processes in wastewater treatment. In this study, polyethylene terephthalate microplastics (PET-MPs) were selected to investigate the mechanism of its influence on the performance of sulfur-mediated biological process from the perspective of microbial metabolic activity, electron transfer capacity and microbial community. The results indicated that the exposure of 50 particles/L PET-MPs improved the chemical oxygen demand (COD) and sulfate removal efficiencies by 6.6 ± 0.5% and 4.5 ± 0.3%, respectively, due to the stimulation of microbial metabolic activity and the enrichment of sulfate-reducing bacteria (SRB) species, such as Desulfobacter. In addition, we found that the PET-MPs promoted Cytochrome C (Cyt C) production and improved the direct electron transfer (DET) capacity mediated by Cyt C. The long-term presence of PET-MPs stimulated the secretion of extracellular polymeric substance (EPS), especially the proteins and humic substances, which have been verified to be electroactive polymers to act as electron shuttles to promote the interspecies electron transfer pathway in sulfur-mediated biological process. Meanwhile, the transformation products (bis-(2-hydroxyethyl) terephthalate (BHET) and Mono (2-hydroxyethyl) terephthalic acid (MHET) of PET-MPs were detected in sulfur-mediated biological process. These findings indicate that the sulfur-mediated biological process has good adaptability to the toxicity of PET-MPs, which strengthens a deeper understanding of the dual function of microplastics in WWTPs.

Rice husk-intensified cathode driving bioelectrochemical reactor for remediating nitrate-contaminated groundwater

To achieve economical and eco-friendly denitrification, rice husk-intensified cathode driving bioelectrochemical reactor (RCBER) was constructed with rice husk as solid-phase carbon source and microbial carrier. Results demonstrated that the application of current improved the utilization of rice husk and enhanced the denitrification, and the quenching of anodic hydroxyl radicals by rice husk also improved the microbial resistance to current. The highest nitrate removal rate as 0.34 mg-N/(L∙d), higher economic benefits, i.e., current efficiency as 31.6% and energy consumption as 2.43 kWh/g NO₃^--N, and the highest environmental benefit, i.e., hydrogenotrophic denitrification contribution as 37.9%, were obtained at 200 mA/m². The best performance at 200 mA/m² was related to its better microenvironment, such as lower accumulation of anodic by-products and higher bioavailability of rice husks, as well as higher microbial metabolic activity, such as stable extracellular polymeric substance, the maximum electron transport system activity as 11.63 ± 0.14 μg O₂·g^-1·min^-1·mg protein^-1 and the highest activity of nitrate reductase (3.15-fold that of control check). The application of current realized the coexistence of heterotrophic and hydrogenotrophic denitrifiers, and multiple functional bacteria such as anaerobic denitrifiers Flavobacterium, aerobic denitrifiers Comamonas, hydrogenotrophic denitrifiers Thermomonas and electron transfer-related Enterobacter coexisted at 200 mA/m², thereby improving RCBER's adaptability to the complex microenvironment. This study provides the theoretical basis for realizing a win-win situation of environmental pollution remediation and agricultural waste disposal.

Bioreduction performance of Cr(VI) by microbial extracellular polymeric substances (EPS) and the overlooked role of tryptophan

Extracellular polymeric substances (EPS) have exhibited promising advantages in mitigating heavy metal contamination, e.g., single-valent silver (Ag(I)), trivalent gold (Au(III)), and hexavalent chromium (Cr(VI)). However, knowledge of the specific substrate in EPSs that supports Cr(VI) reduction has remained elusive. Here, we isolated a novel Cr(VI)-reducing strain with self-mediating properties in an aquatic environment with various pH values to investigate the mechanisms. After analysis by a batch assay coupled with X-ray photoelectron spectroscopy (XPS), electron paramagnetic resonance (EPR), and scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) spectroscopic techniques, it was found that Cr(VI) was reduced by the strain and soluble-EPS (S-EPS), and then, organo-trivalent chromium (organo-Cr(III)) was successfully formed. In addition, compared with other components of the strain, the strain and S-EPS completely removed Cr(VI), and the S-EPS exhibited a positive effect on Cr(VI) reduction with a strong monotonic correlation (R² = 0.999, p = 9.03 × 10^-5), indicating that the reduction is an EPS-dependent process. Specifically, the Cr(VI) reduction efficiency was enhanced to 48.85% and 99.4% after EPS and EPS plus tryptophan were added; their respective efficiencies were 3.94 and 8.02 times higher than that of the control assay in which the reductant was depleted. High-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) analysis showed that the tryptophan concentration concomitantly decreased by 61.54%. These findings highlighted the importance of S-EPS and tryptophan and improved our understanding of EPS for Cr(VI) reduction, which might provide a novel strategy for decontaminating targeted heavy metals in future applications.

The Role of Exopolysaccharides in Direct Interspecies Electron Transfer

Direct interspecies electron transfer (DIET) is an effective mechanism for microbial species to exchange electrons cooperatively during syntrophic metabolism. It is generally accepted that DIET is mainly mediated by electrically conductive pili and outer surface c-type cytochromes (c-Cyts). However, as an extracellular matrix is ubiquitous and abundant on the surface of microorganisms, the effect and mechanism of exopolysaccharides on DIET are still unclear. This study constructed a co-culture of exopolysaccharides-deficient Geobacter sulfurreducens with Geobacter metallireducens to explore the role of exopolysaccharides in DIET. Results revealed that the deficiency of exopolysaccharides extended the metabolic period of the co-culture by 44.4% and changed the proportions of each species in the co-culture. The exopolysaccharides-deficient co-culture failed to form large, tight spherical aggregates and the expression of c-Cyts and pili was decreased. The addition of magnetite and granular activated carbon (GAC), respectively, might compensate for the functions of c-Cyts and pili in the first generation of co-culture, but the stimulatory effect on the metabolic stable period co-culture was fairly limited. These findings demonstrate that non-conductive exopolysaccharides are an important component of DIET aggregates and an extracellular matrix for DIET-required c-Cyts.

Molecular biology and modeling analysis reveal functional roles of propionate to acetate ratios on microbial syntrophy and competition in electro-assisted anaerobic digestion

This study examined the significance of propionate to acetate (HPr/HAc) ratios on microbial syntrophy and competition in microbial electrolysis cell-assisted anaerobic digestion (MEC-AD). In addition to molecular biology and phylogenetic analysis, a numerical MEC-AD model was developed by modifying Anaerobic Digestion Model No.1 to predict the effects of different HPr/HAc ratios (0.5, 1.5, 2.5, and 5). The HPr/HAc ratios of 0.5 and 1.5 maintained efficient syntrophy among electroactive bacteria, hydrogenotrophic methanogens, and homoacetogens, leading to higher methane yields. In contrast, higher HPr/HAc ratios of 2.5 and 5 were detrimental to methanogenesis. Both microbial community analysis and numerical modeling results suggested that higher propionate levels could promote the enrichment of H₂-utilizing acetogens, thereby triggering their competition with hydrogenotrophic methanogens. Moreover, protein fraction in extracellular polymeric substances and the relative expression of genes associated with extracellular electron transfer in both anode and cathode biofilms were markedly decreased with increasing HPr/HAc ratios, indicating partial inhibition of microbial electroactivity. Overall, these results illuminate deep insight into anaerobic syntrophy, contributing to the process kinetics and methane yields in MEC-AD systems. Furthermore, from a practical viewpoint, the results can also be helpful in effective control of MEC-AD operation without propionate accumulation.

Lysozyme regulates the extracellular polymer of activated sludge and promotes the formation of electroactive biofilm

The formation of electroactive biofilm from activated sludge on electrode surface is a key step to construct a bio-electrochemical system, yet it is greatly limited by the poor affinity between the bacteria and the electrode interface. Herein, we report a new method to promote the formation of electroactive biofilm by regulating the extracellular polymeric substance (EPS) content in activated sludge with lysozyme. The investigation of the effect of lysozyme treatment on the content of extracellular polymers and the biofilm formation of electroactive bacteria suggests that lysozyme can improve the permeability of the positive bacterial cell membrane and thus increase the EPS content in the activated sludge. The characterizations of electrochemical activity, surface morphology and community structure of the anode biofilm indicate that increasing EPS content promotes the adhesion of the mixed bacteria in the activated sludge on the electrode and results in denser biofilms with better conductivities. The microbial fuel cell (MFC) inoculated with the sludge of high EPS content exhibits the power density up to 2.195 W/m², much higher than that inoculated with the untreated sludge (1.545 W/m²). The strategy of adjusting EPS content in activated sludge with a biological enzyme can effectively enhance the ability of the bacterial community to form biofilms and exhibits great application potentials in the construction of high efficiency bio-electrochemical systems.

Improved methane production with redox-active/conductive biochar amendment by establishing spatial ecological niche and mediating electron transfer

The multifunctional roles of biochar as an additive in improving the performance of anaerobic digestion (AD) has not been perfectly understood. In this study, the effects of different biochars on AD and the enhanced mechanisms were explored. The CH₄ productions were significantly improved with an increase of 45.9%, 28.3% and 16.5% by amendment with biochar pyrolyzed at 300℃ (BC300), 450℃ (BC450) and 600℃ (BC600), respectively. The tightly-bound communities were established on biochar at the initial stage of fermentation and functional microbes were selectively enriched/colonized in biochar-amended systems. Distinctive loosely-bound microbial communities were observed in BC300 and BC600 amended systems, among which electroactive Desulforhabdus and Clostridiales were the dominant bacteria. Biochar amendments also led to the formation of distinctive spatial ecological niches and the selection preference of microbes for specific spatial locations. These results provided new insights in revealing the potential mechanisms of enhanced AD performance by biochar amendment.

Ionic interaction-driven switchable bactericidal surfaces

Bacteria in the external environment inevitably invade the wound and subsequently colonize the wound surface during surgery and biomedical operations, which slows down the process of wound healing and tissue repair; this poses a significant threat to human health. Therefore, the development of an intelligent antibacterial surface has become the focus of research in the field of antimicrobial strategies, which has important social and economic significance. Here, we present a simple approach of producing an ionic interaction-driven anionic activation substratum which is then functionalized with cationic molecules through coulombic interactional immobilization. The switchable multifunctional antibacterial surface can decrease bacterial attachment and inactivate the attached microorganisms, thus overcoming the conventional challenge for antibacterial surfaces. Briefly, poly (3-sulfopropyl methacrylate potassium salt) (PSPMA) brushes were constructed by surface-initiated atom transfer radical polymerization on silicon or cotton fabric substrates, and a positive-charged component, namely lysozyme (LYZ), hexadecyl trimethyl ammonium bromide (CTAB) or chitosan (CS), was loaded on negative-charged sulfonate groups through electrostatic interactions. The resultant brush-grafted surfaces exhibited more than ∼95.5% bactericidal efficacy and ∼92.8% release rate after the introduction of an adequate amount of contra-ions (1.0 M; Na⁺ & Cl^-) against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, thus achieving a regenerated surface through the cyclic process of "assembly-dissociation". Smart cotton fabric (Fabric-PSPMA/LYZ and Fabric-PSPMA/CS) surfaces were constructed, which were found to promote wound epidermal tissue regeneration with a higher efficiency after 7-day in vivo studies. This ionic interaction-driven method used in the present work is simple and can reversibly renew antibacterial surfaces, which will help in the wider utilization of switchable antibacterial materials with a more ecologic and economic significance. STATEMENT OF SIGNIFICANCE: Smart antibacterial surfaces with renewable characteristics have attracted considerable interests over the past few years. Here, we used ionic interaction-driven force to manipulate dynamic conformational changes in PSPMA surface brushes, accompanied by highly switchable bacteria killing and bacteria releasing behaviors. Different cationic molecules were also designed for assembly/dissociation on the PSPMA-modified surfaces, and the essential parameters, including chemical structures, molecular weight, and cationic charge density, were investigated. With the refined structural combinations and the balance of bacteria killing/bacteria releasing behaviors, smart cotton fabrics (e.g., Fabric-PSPMA/lysozyme and Fabric-PSPMA/chitosan) were designed that could promote wound healing and tissue repair. These results contribute to the fundamental understanding of a switchable cationic-anionic pair design and the corresponding practical, renewable, highly antibacterial fabric.

Ball-milled biochar can act as a preferable biocompatibility material to enhance phenanthrene degradation by stimulating bacterial metabolism

The aim of this study was to evaluate the impact of different concentrations of ball-milled biochar pyrolyzed at 300-700 °C on the lethality, growth, metabolism, and degradability of gram-negative petroleum-degrading bacteria. BM-biochar was not toxic to Acinetobacter venetianus, only slowing the growth rate and extending the logarithmic phase. The ability of A. venetianus to produce extracellular polymeric substances (EPS) and biosurfactants was positive with ROS level. The highest degradation efficiency of phenanthrene (PHE) was 2.84-fold that of the control. Mechanism analysis revealed that increased EPS stimulated the adsorption of PHE and biosurfactant enhanced PHE solubility. The improved PHE biodegradability of A. venetianus through phthalic acid pathway is mainly owing to the intensify of PHE bioavailability and accessibility. These findings provide new insights into effects of BM-biochar on cellular responses and indicate that BM-biochar can act as a biocompatible material to enhance the degradation of organic pollutants.

Electron transfer from Geobacter sulfurreducens to mixed methanogens improved methane production with feedstock gases of H2 and CO2

In order to solve problems of poor utilization of H₂ and CO₂ in biomethane conversion with mixed methanogens due to multi-channel competition and nondirectional electron transfer, Geobacter sulfurreducens were cocultured with mixed methanogens to promote oriented metabolic pathway of H₂ and CO₂ to produce CH₄. When inoculation volume ratio of G. sulfurreducens to mixed methanogens was 2:4, CH₄ yield increased to 0.24 mL/ml H₂ (close to the maximum theoretical yield of 0.25 mL/ml H₂) and conversion efficiency of H₂ to CH₄ increased from 72 to 96%. Electrochemical detection and three-dimensional fluorescence spectra showed that the co-culture system had an increased metabolic capacity and spectral intensity of fulvic acid-like compounds was enhanced, which mediated direct interspecific electron transfer to produce CH₄. The 16S rRNA gene sequencing showed that relative abundance of G. sulfurreducens and Methanoculleus increased, indicating an established syntrophic relationship between G. sulfurreducens and Methanoculleus.

Exopolysaccharides matrix affects the process of extracellular electron transfer in electroactive biofilm

The applications of bioelectrochemical systems (BESs) in the field of environment and energy are achieved through the bioelectrocatalytic process of electroactive biofilms. As a primary component of biofilm, the role of exopolysaccharides in electroactive biofilm in BESs is poorly understood. This study constructed an exopolysaccharides-deficient Geobacter sulfurreducens-based BES to explore the role of exopolysaccharides in electroactive biofilm. Compared with the wild type, the mutant biofilm expressing less exopolysaccharides decreased the capacity of current generation. In the mutant biofilm, the content of exopolysaccharides decreased significantly, resulting in a thinner biofilm and lower cell viability compared with the wild-type biofilm. However, the mutant with overexpressed pili developed a mature biofilm with extended time, which indicating the importance of exopolysaccharides for early biofilm formation and the compensatory role of pili in biofilm formation. The mutant biofilm had less content of c-type cytochromes (c-Cyts) and lower electrochemical activity of extracellular polymeric substances than the wild-type biofilm, suggesting a function of exopolysaccharides anchoring extracellular c-Cyts that essential to extracellular electron transfer (EET) in electroactive biofilms. Our findings demonstrated the essential role of exopolysaccharides in the process of EET in electroactive biofilm, which contributed to a better understanding and optimization of the performance of BESs.

Use of extracellular polymeric substances as natural redox mediators to enhance denitrification performance by accelerating electron transfer and carbon source metabolism

Extracellular polymeric substances (EPS) extracted from waste activated sludge were used as endogenous redox mediator to enhance denitrification performance. The nitrate reduction rate increased 1.42-fold when EPS were added at 75 mg C/L (C represents total organic carbon). EPS addition decreased the charge transfer resistance and improved the electron transport system activity. The nitrate reductase and nitrite reductase activities improved by 29.7% and 25.4%, respectively. The activation energy of the system with EPS addition (25.82 kJ/mol) was 31.1% lower than that of the control group (37.49 kJ/mol). Besides, EPS could be used as electron carriers to accelerate electron transport; its primary role was similar to that of the quinone loop in the electron transfer chain. More importantly, EPS addition enhanced carbon source metabolism, which increased the available nicotinamide adenine dinucleotide yield to 1.21 times that of the control group, and thus promoted the denitrification performance of activated sludge.

Phthalate Esters Released from Plastics Promote Biofilm Formation and Chlorine Resistance

Phthalate esters (PAEs) are commonly released from plastic pipes in some water distribution systems. Here, we show that exposure to a low concentration (1-10 μg/L) of three PAEs (dimethyl phthalate (DMP), di-n-hexyl phthalate (DnHP), and di-(2-ethylhexyl) phthalate (DEHP)) promotes Pseudomonas biofilm formation and resistance to free chlorine. At PAE concentrations ranging from 1 to 5 μg/L, genes coding for quorum sensing, extracellular polymeric substances excretion, and oxidative stress resistance were upregulated by 2.7- to 16.8-fold, 2.1- to 18.9-fold, and 1.6- to 9.9-fold, respectively. Accordingly, more biofilm matrix was produced and the polysaccharide and eDNA contents increased by 30.3-82.3 and 10.3-39.3%, respectively, relative to the unexposed controls. Confocal laser scanning microscopy showed that PAE exposure stimulated biofilm densification (volumetric fraction increased from 27.1 to 38.0-50.6%), which would hinder disinfectant diffusion. Biofilm densification was verified by atomic force microscopy, which measured an increase of elastic modulus by 2.0- to 3.2-fold. PAE exposure also stimulated the antioxidative system, with cell-normalized superoxide dismutase, catalase, and glutathione activities increasing by 1.8- to 3.0-fold, 1.0- to 2.0-fold, and 1.2- to 1.6-fold, respectively. This likely protected cells against oxidative damage by chlorine. Overall, we demonstrate that biofilm exposure to environmentally relevant levels of PAEs can upregulate molecular processes and physiologic changes that promote biofilm densification and antioxidative system expression, which enhance biofilm resistance to disinfectants.

An overview of wind energy development and policy initiatives in India

The Indian renewable energy sector has grown at a compounded annual growth rate of 15.51% in the last five years, where wind growth is about 8%. The Indian government has been adopting changes to create a safe, cheap, and sustainable energy system to fuel vigorous economic growth. The government has made significant efforts in ensuring universal access to energy, giving power to its residents. It is implementing a large-scale deployment of renewable energy, particularly solar and wind. This paper examines the country's wind sector in-depth, including the government policy, financial incentives, and accomplishments. The study goes on to discuss the prospects and problems of the wind sector, as well as solutions to overcome them to reach the estimated target of 140-150 GW by 2030. Wind power growth in the country has weakened in the last few years which may hamper the country's ambitious renewable energy targets. Wind industry is facing several hindrances ranging from discontinuation of incentives, land acquisition, DISCOM's poor health, change in bidding scheme, old wind sites, etc. Certain steps, such as repowering outdated wind farms, giving generation-based incentives, tax concessions, reassessing the country's wind potential, and constructing competitive renewable energy zones could aid in reviving the wind energy sector.

The effect of intermittent anode potential regimes on the morphology and extracellular matrix composition of electro-active bacteria

Electro-active bacteria (EAB) can form biofilms on an anode (so-called bioanodes), and use the electrode as electron acceptor for oxidation of organics in wastewater. So far, bioanodes have mainly been investigated under a continuous anode potential, but intermittent anode potential has resulted in higher currents and different biofilm morphologies. However, little is known about how intermittent potential influences the electron balance in the anode compartment. In this study, we investigated electron balances of bioanodes at intermittent anode potential regimes. We used a transparent non-capacitive electrode that also allowed for in-situ quantification of the EAB using optical coherence tomography (OCT). We observed comparable current densities between continuous and intermittent bioanodes, and stored charge was similar for all the applied intermittent times (5 mC). Electron balances were further investigated by quantifying Extracellular Polymeric Substances (EPS), by analyzing the elemental composition of biomass, and by quantifying biofilm and planktonic cells. For all tested conditions, a charge balance of the anode compartment showed that more electrons were diverted to planktonic cells than biofilm. Besides, 27–43% of the total charge was detected as soluble EPS in intermittent bioanodes, whereas only 15% was found as soluble EPS in continuous bioanodes. The amount of proteins in the EPS of biofilms was higher for intermittent operated bioanodes (0.21 mg COD proteins mg COD biofilm⁻¹) than for continuous operated bioanodes (0.05 mg COD proteins mg COD biofilm⁻¹). OCT revealed patchy morphologies for biofilms under intermittent anode potential. Overall, this study helped understanding that the use of a non-capacitive electrode and intermittent anode potential deviated electrons to other processes other than electric current at the electrode by identifying electron sinks in the anolyte and quantifying the accumulation of electrons in the form of EPS.

•

Continuous acetate feeding and intermittent anode potential lead to EPS production in electro-active bacteria.

•

A charge balance was made including soluble EPS and planktonic cells.

•

Patchy biofilm morphologies and more planktonic cells were observed when intermittent anode potential was applied.

•

Biofilms grown under intermittent anode potential had more EPS and more proteins.

Quinones contained in wastewater as redox mediators for the synergistic removal of azo dye in microbial fuel cells

The present paper aimed to investigate the roles of quinones contained in wastewater and the enhanced effects on microbial fuel cells (MFCs) under different redox conditions. The feasibility of using wastewater rich in quinones to act as co-substrate and redox mediators (RMs) library to strengthen the synergistic removal of azo dye in MFCs was evaluated. The results demonstrated that quinones achieved enhanced effects on electricity generation and COD removal of MFC better at higher current intensity. The addition of pure quinone decreased electron transfer resistance (Rct) of MFCs from 4.76 Ω to 2.13 Ω under 1000 Ω resistance and 1.16 Ω-0.75 Ω under 50 Ω resistance. Meanwhile, higher coulombic efficiency was achieved. Compared with sodium acetate, using quinone-rich traditional Chinese medicine (TCM) wastewater as the co-substrate enhanced the synergistic removal of reactive red 2 (RR2) in MFCs from 79.58% to 92.45% during 24 h. RR2 was also degraded more thoroughly due to the accelerated electron transfer process mediated by RMs. Microbial community analysis demonstrated that the presence of quinone in TCM wastewater can enrich different exoelectrogens under varied redox conditions and thus influenced the enhanced effects on MFC. Metagenomic functional prediction results further indicated that the abundance of functional genes involved in carbohydrate metabolism, membrane transport metabolism, biofilm formation, and stress tolerance increased significantly in presence of RMs. Redundancy analyses revealed that RMs addition was the more important factor driving the variation of the microorganism community. This study revealed the potential effect of quinones as redox mediators on the bioelectrochemical system for pollutants removal.

Combined effects of Penicillium oxalicum and tricalcium phosphate on lead immobilization: Performance, mechanisms and stabilities

Phosphorus (P) containing minerals are identified as effective Pb stabilizers in soil, while their low solubility limit the Pb immobilization efficiency. In this work, the combination of phosphate solubilizing fungi (PSF) Penicillium oxalicum and tricalcium phosphate (TCP) was constructed and applied to improve Pb immobilization stabilities in medium and soils. P. oxalicum+ TCP could significantly improve Pb²⁺ removal to above 99% under different TCP/Pb²⁺ and pH values. TCP and P. oxalicum could remarkably immobilize Pb by ion exchange, and PbC₂O₄ precipitation or surface adsorption, respectively. While the enhanced Pb immobilization in P. oxalicum+ TCP was explained by stronger Pb²⁺ interaction with tryptophan protein-like substances in extracellular polymeric substance, and the formation of the most stable Pb-phosphate compound hydroxypyromorphite (Pb₅(PO₄)₃OH). Toxicity characteristic leaching procedure test showed that only 0.91% of Pb²⁺ was leachable in P. oxalicum+ TCP treatment, significantly lower than that in P. oxalicum (2.90%) and TCP (7.52%) treatments. In addition, the lowest soil exchangeable Pb fraction (37.1%) and the highest available soil P (88.0 mg/kg) were both found in P. oxalicum+ TCP treatment. By synergistically forming stable Pb-containing products, thus the combination of PSF and P minerals could significantly improve Pb²⁺ immobilization and stability in soils.

Performance and mechanism of sulfamethoxazole removal in different bioelectrochemical technology-integrated constructed wetlands

Sulfamethoxazole (SMX) has a high concentration and detection frequency in aquatic environments due to the poor removal efficiency of traditional biological treatment processes. Bioelectrochemical technology-integrated constructed wetlands (CWs) have great potential for SMX removal; however, the process of SMX removal in different bioelectrochemical technology-integrated CWs (microbial fuel cell (MFC) and direct current (EC)) remains unclear. To address this, we examined the mechanism of SMX removal in MFCCW and ECCW. The results revealed that the SMX removal efficiency can reach 96.0 ± 2.4% in the ECCW and 97.2 ± 2.2% in the MFCCW. The enhancement of MFC for SMX removal in CW was slightly better than that in direct current (p > 0.05). It was found that the adsorption process of SMX in the substrate promoted by EC was more enhanced than that by MFC. Furthermore, bioelectrochemical technology improved plant activity, including root and enzymatic (superoxide dismutase, peroxidase, and catalase) activities, and fluorescence parameters (photochemical quenching coefficient, non-photochemical quenching coefficient, and quantum efficiency of PS II). Significant differences were found between CW and ECCW (p < 0.05), while no significant differences were found between CW and MFCCW (p > 0.05). The microbial activity and abundance in CW were improved by bioelectrochemical technology, and the microbial community structure was optimised to be simpler and more stable. However, EC tended to promote microbial and plant activity in CW, whereas MFC tended to optimise the microbial community and improve the tightness and stability of the module. The enhanced difference might also account for the changes in the SMX degradation pathway. 4-aminobenzenesulfonic acid (TP174), 3-amino-5-methylisoxazole (TP99) and 5-methylisoxazole (TP84) were all common products in the three reactors, whereas TP99 underwent further ring-opening in MFCCW and TP174 underwent further hydrolysis in ECCW. This study provided an important reference for the targeted regulation of plants and microorganisms in constructed wetlands via different bioelectrochemistry to enhance characteristic pollutants degradation.

Redox potential-induced regulation of extracellular polymeric substances in an electroactive mixed community biofilm

Electroactive biofilms are promising in achieving efficient wastewater treatment and energy conversion in bioelectrochemical systems (BESs). Extracellular polymeric substances (EPS) are important for physical contact with electrode surface and extracellular electron transfer (EET) within biofilm. Redox potential is an important trigger for the regulation of EPS in microbial aggregates, but this yet is lacking for electroactive mixed community biofilms. This study first explored how redox potential affected EPS of electroactive mixed community biofilms, which were cultured in BES reactors with different anode potentials (-0.3 V, 0 V, +0.3 V, +0.6 V vs. SCE) using artificial brewery wastewater as substrate. The anode potential regulated biocurrent generation, overall EPS production, EPS composition and EPS redox properties. The biofilms poised at 0 V exhibited the highest current production (7.2 mA) and EPS redox capacity, while the +0.6 V biofilms had the lowest current production (1.2 mA) with lowest EPS redox capacity. The steady-state current exhibited a significant positive correlation with EPS redox capability, suggesting an important role of EPS in anode potential-dependent current production. Significant positive correlations between proteins or humic substances in EPS and EPS redox properties further verified that EPS redox feature raised from proteins and humic substances. This study provided a potential mechanism that anode potential determined the electroactivity of anode biofilm via regulating EPS composition and redox properties, and will facilitate the use of electroactive biofilms in bioelectrochemical applications.

Buffer capacity regulates the stratification of anode-respiring biofilm during brewery wastewater treatment

Improving the buffer capacity of the electrolyte can enhance the anode performance in bioelectrochemical systems (BESs). To elucidate the mechanism underlying the facilitated BESs performance, this study used three different anode biofilms cultured with different concentrations of phosphate buffer (5, 50 and 100 mM) to investigate the biofilm response, in terms of the spatial structure of metabolic activity and microbial community, to different buffer capacities. Results showed that the electrochemical activities of the anode biofilms positively correlated with the buffer concentration. The spatial stratification of metabolic activity and microbial community of the anode biofilms were regulated by the buffer capacity, and the spatial microbial heterogeneity of the anode biofilm decreased as the buffer concentration increased. With increasing buffer capacity, Geobacter spp. were enriched in both the inner and outer layers of the biofilm, and the inhibition of methanogens growth improved the COD removal attributed to anode respiration. Additionally, the stimulation of EPS production in biofilms played a role in increasing the electrochemical performance of biofilms by buffer improvement. This study first revealed the regulation of buffer capacity on the stratification of anode biofilm during brewery wastewater treatment, which provided a deep insight into the relation of biofilm structure to its electrochemical properties.

Extracellular polymeric substances from Shewanella oneidensis MR-1 biofilms mediate the transformation of Ferrihydrite

Extracellular polymeric substances (EPS) of dissimilatory iron-reducing bacteria (DIRB) such as Shewanella oneidensis MR-1 play a crucial role in the biotransformation of iron-containing minerals, but the mechanism has not been fully deciphered. Herein, abiotic and biotic transformation of ferrihydrite (Fh) were compared to clarify the contributions of MR-1, EPS-free MR-1 (MR-1-EPS), loosely bound EPS (LB-EPS), and tightly bound EPS (TB-EPS). The results of abiotic Fh transformation indicated that EPS did not block the Fh surfaces and thus has an insignificant effect on the adsorbed Fe(II)-Fh interaction. The complexation of the Fe(III) intermediate (Fe(III)_active) with EPS, especially LB-EPS, however, inhibited the nucleation of secondary Fe minerals and changed the crystallization pathway. For biotic Fh transformation, on the other hand, EPS had dual effects that accelerated Fh bioreduction due to the enhanced extracellular electron transfer (EET) and constrained the following Fh mineralization by cutting of the chain reactions leading to mineral crystallization. Our finding also suggested that the effects of EPS on Fh biotransformation largely depend on the chemical properties of EPS, especially the polar functional groups such as carboxyl and phosphate, because of their important abilities for the cell attachment and Fe(II)/Fe(III) binding.

Biological detoxification and decolorization enhancement of azo dye by introducing natural electron mediators in MFCs

Reactive red 2 (RR2) is a highly recalcitrant and toxic azo dye that can cause the collapse of biological treatment system. Although MFC can decolorize RR2 effectively, its performance is still inevitably affected by toxicity. Anthraquinone can enhance MFCs' performance through mediating electron transfer. In this study, an anthraquinone-rich natural plants (B.rheum (Rheum offcinale Baill)) was extracted and then added to MFCs. The optimal dosage was selected and the enhanced effects were investigated. The results showed that adding 5%(V/V) extract resulted in the optimal performance elevation of MFC. When 5% extract was added together with RR2, 15.63% and 1.33-fold improvement in RR2 decolorization efficiency and rate were achieved compared with the control group. Meanwhile, higher power density (2.75 W/m³), coulombic efficiency (6.45%), and lower internal resistance (233.69 Ω) were also observed when 5% B.rheum extract and RR2 were added. B.rheum extract in MFCs enhanced microbial activity and enriched the dye-degrading microorganisms, such as Enterobacter, Raoultella, Comamonas and Shinella. B.rheum extract acts as "antidote" in alleviating the biotoxicity of RR2 was firstly illustrated in this study. The results provided a new strategy for using plant-source electron mediators to simultaneously improve biological detoxification, bioelectricity generation and dye decolorization in bioelectrochemical system.