Modified conductive polyaniline-carbon nanotube composite electrodes for bioelectricity generation and waste remediation

Advances in Biological Wastewater Treatment Processes: Focus on Low-Carbon Energy and Resource Recovery in Biorefinery Context

Advancements in biological wastewater treatment with sustainable and circularity approaches have a wide scope of application. Biological wastewater treatment is widely used to remove/recover organic pollutants and nutrients from a diverse wastewater spectrum. However, conventional biological processes face challenges, such as low efficiency, high energy consumption, and the generation of excess sludge. To overcome these limitations, integrated strategies that combine biological treatment with other physical, chemical, or biological methods have been developed and applied in recent years. This review emphasizes the recent advances in integrated strategies for biological wastewater treatment, focusing on their mechanisms, benefits, challenges, and prospects. The review also discusses the potential applications of integrated strategies for diverse wastewater treatment towards green energy and resource recovery, along with low-carbon fuel production. Biological treatment methods, viz., bioremediation, electro-coagulation, electro-flocculation, electro-Fenton, advanced oxidation, electro-oxidation, bioelectrochemical systems, and photo-remediation, are summarized with respect to non-genetically modified metabolic reactions. Different conducting materials (CMs) play a significant role in mass/charge transfer metabolic processes and aid in enhancing fermentation rates. Carbon, metal, and nano-based CMs hybridization in different processes provide favorable conditions to the fermentative biocatalyst and trigger their activity towards overcoming the limitations of the conventional process. The emerging field of nanotechnology provides novel additional opportunities to surmount the constraints of conventional process for enhanced waste remediation and resource valorization. Holistically, integrated strategies are promising alternatives for improving the efficiency and effectiveness of biological wastewater treatment while also contributing to the circular economy and environmental protection.

Pore-Matched Sponge for Microorganisms Pushes Electron Extraction Limit in Microbial Fuel Cells

Microbial fuel cells (MFCs) are of great potential for wastewater remediation and chemical energy recovery. Nevertheless, limited by inefficient electron transfer between microorganisms and electrode, the remediation capacity and output power density of MFCs are still far away from the demand of practical application. Herein, a pore-matching strategy is reported to develop uniform electroactive biofilms by inoculating microorganisms inside a pore-matched sponge, which is assembled of core-shell polyaniline@carbon nanotube (PANI@CNT). The maximum power density achieved by the PANI@CNT bioanode is 7549.4 ± 27.6 mW m-2 , which is higher than the excellent MFCs with proton exchange membrane reported to date, while the coulombic efficiency also attains a considerable 91.7 ± 1.2%. The PANI@CNT sponge enriches the exoelectrogen Geobacter significantly, and is proved to play the role of conductive pili in direct electron transfer as it down-regulates the gene encoding pilA. This work exemplifies a practicable strategy to develop excellent bioanode to boost electron extraction in MFCs and provides in-depth insights into the enhancement mechanism.

Mixed Ionic-Electronic Conducting Hydrogels with Carboxylated Carbon Nanotubes for High Performance Wearable Thermoelectric Harvesters

Mixed ionic-electronic conducting (MIEC) thermoelectric (TE) materials offer higher ionic conductivity and ionic Seebeck coefficient compared to those of purely ionic-conducting TE materials. These characteristics make them suitable for direct use in thermoelectric generators (TEGs) as the charge carriers can be effectively transported from one electrode to the other via the external circuit. In the present study, MIEC hydrogels are fabricated via the chemical cross-linking of polyacrylamide (PAAM) and polydopamine (PDA) to form a double network. In addition, electrically conducting carboxylated carbon nanotubes (CNT-COOH) are dispersed evenly within the hydrogel via sonication and interaction with the PDA. Moreover, the electrical properties of the hydrogel are further improved via the in situ polymerization of polyaniline (PANI). The presence of CNT-COOH facilitates the ionic conductivity and enhances the ionic Seebeck coefficient via ionic-electronic interactions between sodium ions and carboxyl groups on CNT-COOH, which can be observed in X-ray photoelectron spectroscopy results, thereby promoting the charge transport properties. As a result, the optimum device exhibits a remarkable ionic conductivity of 175.3 mS cm-1 and a high ionic Seebeck coefficient of 18.6 mV K-1, giving an ionic power factor (PFi) of 6.06 mW m-1 K-2 with a correspondingly impressive ionic figure of merit (ZTi) of 2.65. These values represent significant achievements within the field of gel-state organic TE materials. Finally, a wearable module is fabricated by embedding the PAAM/PDA/CNT-COOH/PANI hydrogel into a poly(dimethylsiloxane) mold. This configuration yields a high power density of 171.4 mW m-2, thus highlighting the considerable potential for manufacturing TEGs for wearable devices capable of harnessing waste heat.

Fabrication of modified electrode by reduced graphene oxide (rGO) and polyaniline (PANI) for enhancing azo dye decolorization in bio-electrochemical systems (BESs)

Bio-electrochemical systems (BESs) have attracted wide attention in the field of wastewater treatment owing to their fast electron transfer rate and high performance. Unfortunately, the low electro-chemical activity of carbonaceous materials commonly used in BESs remains a bottleneck for their practical applications. Especially, for refractory pollutants remediation, the efficiency is largely limited by the cathode property in term of (bio)-electrochemical reduction of highly oxidized functional groups. Herein, a reduced graphene oxide (rGO) and polyaniline (PANI) modified electrode was fabricated via two-step electro-deposition using carbon brush as raw material. Benefiting from the modified graphene sheets and PANI nanoparticles, the rGO/PANI electrode shows highly conductive network with the electro-active surface area increased by 12 times (0.013 mF cm^-2) and the charge transfer resistance decreased by 92% (0.23Ω) comparing with the unmodified one. Most importantly, the rGO/PANI electrode used as abiotic cathode achieves highly efficient azo dye removal from wastewater. The highest decolorization efficiency reaches 96 ± 0.03% within 24 h and the maximum decolorization rate is as high as 20.9 ± 1.45 g h^-1·m^-3. The features of improved electro-chemical activity and enhanced pollutant removal efficiency provide a new insight toward development of high performance BESs via electrode modification for practical application.

Functional Nanomaterial-Modified Anodes in Microbial Fuel Cells: Advances and Perspectives

Microbial fuel cell (MFC) is a promising approach that could utilize microorganisms to oxidize biodegradable pollutants in wastewater and generate electrical power simultaneously. Introducing advanced anode nanomaterials is generally considered as an effective way to enhance MFC performance by increasing bacterial adhesion and facilitating extracellular electron transfer (EET). This review focuses on the key advances of recent anode modification materials, as well as the current understanding of the microbial EET process occurring at the bacteria-electrode interface. Based on the difference in combination mode of the exoelectrogens and nanomaterials, anode surface modification, hybrid biofilm construction and single-bacterial surface modification strategies are elucidated exhaustively. The inherent mechanisms may help to break through the performance output bottleneck of MFCs by rational design of EET-related nanomaterials, and lead to the widespread application of microbial electrochemical systems.

3D Composite PDMS/MWCNTs Aerogel as High-Performing Anodes in Microbial Fuel Cells

Porous 3D composite materials are interesting anode electrodes for single chamber microbial fuel cells (SCMFCs) since they exploit a surface layer that is able to achieve the correct biocompatibility for the proliferation of electroactive bacteria and have an inner charge transfer element that favors electron transfer and improves the electrochemical activity of microorganisms. The crucial step is to fine-tune the continuous porosity inside the anode electrode, thus enhancing the bacterial growth, adhesion, and proliferation, and the substrate's transport and waste products removal, avoiding pore clogging. To this purpose, a novel approach to synthetize a 3D composite aerogel is proposed in the present work. A 3D composite aerogel, based on polydimethylsiloxane (PDMS) and multi-wall carbon nanotubes (MWCNTs) as a conductive filler, was obtained by pouring this mixture over the commercial sugar, used as removable template to induce and tune the hierarchical continuous porosity into final nanostructures. In this scenario, the granularity of the sugar directly affects the porosities distribution inside the 3D composite aerogel, as confirmed by the morphological characterizations implemented. We demonstrated the capability to realize a high-performance bioelectrode, which showed a 3D porous structure characterized by a high surface area typical of aerogel materials, the required biocompatibility for bacterial proliferations, and an improved electron pathway inside it. Indeed, SCMFCs with 3D composite aerogel achieved current densities of (691.7 ± 9.5) mA m^-2, three orders of magnitude higher than commercial carbon paper, (287.8 ± 16.1) mA m^-2.

Functional Nanohybrids and Nanocomposites Development for the Removal of Environmental Pollutants and Bioremediation

World population growth, with the consequent consumption of primary resources and production of waste, is progressively and seriously increasing the impact of anthropic activities on the environment and ecosystems. Environmental pollution deriving from anthropogenic activities is nowadays a serious problem that afflicts our planet and that cannot be neglected. In this regard, one of the most challenging tasks of the 21st century is to develop new eco-friendly, sustainable and economically-sound technologies to remediate the environment from pollutants. Nanotechnologies and new performing nanomaterials, thanks to their unique features, such as high surface area (surface/volume ratio), catalytic capacity, reactivity and easy functionalization to chemically modulate their properties, represent potential for the development of sustainable, advanced and innovative products/techniques for environmental (bio)remediation. This review discusses the most recent innovations of environmental recovery strategies of polluted areas based on different nanocomposites and nanohybrids with some examples of their use in combination with bioremediation techniques. In particular, attention is focused on eco-friendly and regenerable nano-solutions and their safe-by-design properties to support the latest research and innovation on sustainable strategies in the field of environmental (bio)remediation.

Enhancing Seebeck coefficient and electrical conductivity of polyaniline/carbon nanotube–coated thermoelectric fabric

In this work, flexible thermoelectric fabrics, polyester/yarn fabrics coated with polyaniline/carbon nanotube (PANI/CNT) nanocomposite, were fabricated by sequential processing: (I) polyaniline/carbon nanotube nanocomposites preparation by a one-step in-situ polymerization and (II) dip coating of a mixture solution of CNT-doped PANI on a polyester/yarn fabric. Nanocomposites were synthesized with various CNT content (0.5, 2.5, 5, and 10 wt%) and characterized using different methods. The Seebeck coefficient and electrical conductivity measurements were used to determine their thermoelectric properties. The results revealed significant improvement in both electrical conductivity and the Seebeck coefficient with the addition of CNT. The electrical conductivity increased from 0.011 to 0.1345 S/cm with the increment of CNT from 0.5 to 10 wt%. The highest Seebeck coefficient of 11.4 μV/K was observed for the sample containing 5 wt% CNT at 338 K where the maximum power factor of 1.598×10−3 μWm−1K−2 was obtained for the fabric coated with nanocomposite containing 10 wt% CNT.

Wood carbon electrode in microbial fuel cell enhances chromium reduction and bioelectricity generation

Microbial fuel cell (MFC) is a recommended treatment to remediate hexavalent chromium (Cr(VI)) in wastewater. In this study, a wood carbon (WC) electrode was introduced in MFC to enhance the Cr(VI) removal efficiency. WC electrode in MFC completely removed Cr(VI) as compared to the carbon cloth (31.12%) and carbon felt (34.83) within 48 h of operation at 20 mg L^-1 of Cr(VI) concentration. The maximum power density of WC electrode was 62.59 mW m^-2 higher than 0.115 and 3.154 mW m^-2 of carbon cloth and felt respectively. The specific surface area of WC increased to 158.47 m^-2 g^-1 after high-temperature carbonization, and electrochemical tests indicate it has higher electrocatalytic ability. Therefore, WC might be a good electrode material to effectively remove Cr(VI) and generate bioelectricity simultaneously.

Performance evaluation of microbial fuel cell using a radiation synthesized low density polyethylene-grafted-poly (glycidyl methacrylate-co-vinyl acetate) as a proton exchange membrane

ABSTRACTThe present work focuses on the synthesis of a proton exchange membrane to be assembled in a microbial fuel cell (MFC) for simultaneous bioelectricity production and domestic wastewater treatment. The indigenous membrane was prepared by ionizing irradiation-induced graft copolymerization of glycidyl methacrylate (GMA) and vinyl acetate (VAc) onto low-density polyethylene and subsequently, the prepared grafted sheets were sulfonated via epoxy ring-opening of PGMA moieties. Parameters affecting the grafting degree were investigated and the prepared membranes were characterized by investigating their structural, thermal, mechanical, and electrical properties. Some physicochemical characteristics including ion exchange capacity, sulfonation density, and proton conductivity were also evaluated. The data confirmed the success of the preparation protocol to obtain a suitable membrane for the proposed application. Moreover, the performance of the assembled MFC was thoroughly investigated through the evaluation of its electrochemical behaviour including cyclic voltammetry, electrochemical impedance spectroscopy, columbic efficiency, and wastewater treatment capability. The sulfonated LDPE-g-P(GMA-co-VAc) membrane of 80% grafting degree shows substantial removal of chemical oxygen demand up to about 90% with columbic efficiency of 10.1%, columbic recovery of 8.7%, rate of energy harvest of 2.1 C/h and power density of 2.72 W m^-2. However, the use of 10 mM of KMnO₄ as electron acceptor drastically increase the harvested power density to reach 356.4 W m^-2.

Tuning of Electrode Surface for Enhanced Bacterial Adhesion and Reactions: A Review on Recent Approaches

The study of bacterial adhesion and its consequences has great significance in different fields such as marine science, renewable energy sectors, soil and plant ecology, food industry, and the biomedical field. Generally, the adverse effects of microbial surface interactions have attained wide visibility. However, herein, we present distinct approaches to highlight the beneficial aspects of microbial surface interactions for various applications rather than deal with the conventional negative aspects or prevention strategies. The surface microbial reactions can be tuned for useful biochemical or bio-electrochemical applications, which are otherwise unattainable through conventional routes. In this context, the present review is a comprehensive approach to highlight the basic principles and signature parameters that are responsible for the useful microbial-electrode interactions. It also proposes various surface tuning strategies, which are useful for tuning the electrode characteristics particularly suitable for the enhanced bacterial adhesion and reactions. The tuning of surface characteristics of electrodes is discussed with a special reference to the Microbial Fuel Cell as an example.

Microbial Fuel Cell Technology—A Critical Review on Scale-Up Issues

Microbial fuel cell (MFC) technology has attracted a great amount of attention due to its potential for organic and inorganic waste treatment concomitant with power generation. It is thus seen as a clean energy alternative. Modifications and innovations have been conducted on standalone and hybrid/coupled MFC systems to improve the power output to meet the end goal, namely, commercialization and implementation into existing wastewater treatment plants. As the energy generated is inversely proportional to the size of the reactor, the stacking method has been proven to boost the power output from MFC. In recent years, stacked or scale-up MFCs have also been used as a power source to provide off-grid energy, as well as for in situ assessments. These scale-up studies, however, encountered various challenges, such as cell voltage reversal. This review paper explores recent scale-up studies, identifies trends and challenges, and provides a framework for current and future research.

Magnesium ferrite spinels as anode modifier for the treatment of Congo red and energy recovery in a single chambered microbial fuel cell

Magnesium Ferrite (MgFe₂O₄) spinel structures prepared by a solid-state reaction was used as an anode modifier in the microbial fuel cell (MFC) treatment of Congo red dye. The performance of the reactors with unmodified stainless-steel mesh anode (CR-1) and MgFe₂O₄ coated stainless steel mesh anode (CR-2) were tested and compared followed by aerobic treatment. The peak power density was observed to be 295.936 (CR-1) and 430.336 mW/m² (CR-2) revealing increased bioenergy output and better electron transfer in the reactor with the MgFe₂O₄ modified anode. The final decolourisation efficiencies were found to be 92.053% for CR-1 and 98.386% for CR-2. The formation of metabolites (diaminonaphthalene-1-sulfonate, 1-(biphenyl-4-yl)-2-(naphthalene-2-yl) diazene, benzidine and phthalic acid, monoethyl ether) during the anaerobic-aerobic biotreatment of azo dye was confirmed using Gas chromatography coupled Mass spectrometry system. Scanning electron microscopy confirmed a uniform coating of MgFe₂O₄ on the anode surface with evidence of biofilm formation in the system. Electrochemical studies confirmed the superior performance of spinel coated anode with enhanced redox activity. In addition, the charge-discharge studies confirmed the high capacitive nature of the modified electrode improving the electrodes charge holding capacity. The study suggested an effective treatment strategy for the treatment of Congo red dye.

Emerging trends in microbial fuel cell diversification-Critical analysis

Global need for transformation from fossil-based to bio-based economy is constantly emerging for the production of low-carbon/renewable energy/products. Microbial fuel cell (MFC) catalysed by bio-electrochemical process gained significant attention initially for its unique potential to generate energy. Diversification of MFC is an emerging trend in the context of prioritising/enhancing product output while exploring the mechanism specificity of individual processes. Bioelectrochemical treatment system (BET), microbial electrosynthesis system (MES), bioelectrochemical system (BES), electro-fermentation (EF), microbial desalination cell (MDC), microbial electrolysis cell (MEC) and electro-methanogenesis (EM) are the diversified MFC systems that are being researched actively. Owing to its broad diversification, MFC domain is increasing its potential credibility as a platform technology. Microbial catalyzed electrochemical reactions are the key which directly/indirectly are proportionally linked to electrometabolic activity of microorganisms towards final anticipated output. This review intends to holistically document the mechanisms, applications and current trends of MFC diversifications towards multi-faced applications.

Microbial Electrochemical Systems: Principles, Construction and Biosensing Applications

Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.

Outer membrane compositions enhance the rate of extracellular electron transport via cell-surface MtrC protein in Shewanella oneidensis MR-1

While cell membrane composition is critical for the function of membrane proteins, membrane modification has not been used to control the rate of extracellular electron transfer (EET) via the outer membrane protein complexes. Here, the rate of electron flow via the cell-surface redox protein, MtrC, was highly enhanced upon change in the outer membrane composition in Shewanella oneidensis MR-1. The MR-1 strain was pre-cultured at 4 °C and 30 °C to initiate differentiation of membrane composition. The whole-cell difference electrochemical assay of wild-type and mutant strains lacking MtrC suggested that the rate of EET via MtrC increased approximately 18 times at 4 °C than 30 °C. Circular dichroism spectroscopy showed that the molar exciton coupling coefficient for inter-heme interaction in MtrC increased in MR-1 at 4 °C than 30 °C. Results suggest that membrane modification may be a novel strategy for improving the efficiency of EET-based technologies.

Functionalized conductive activated carbon-polyaniline composite anode for augmented energy recovery in microbial fuel cells

Internal resistance is one of the limiting factors for power production in microbial fuel cells (MFC). To overcome this, current study designed polyaniline functionalized activated carbon (PANi-FAC) composite as capacitive anode with strategic electrocatalytic capability, and was comparatively assessed with SSM-PANi and bare SSM as anodes in three double chambered MFCs respectively. Power output and COD removal efficiency of PANi-FAC coated on stainless steel mesh (SSM-PANi/FAC) is superior (322 mW/m²; 87.6%) in comparison to SSM-PANi (273 mW/m²; 62.4%) and bare SSM (169 mW/m²; 54%). In addition, maximum specific capacitance of hybrid electrodes is relatively high with SSM-PANi/FAC (360.84 F/g) than SSM-PANi anode (128.26 F/g). Nyquist impedance plots showed less charge-transfer resistance (Rct) with SSM-PANi/FAC (29.9 Ω) than SSM-PANi (206.8 Ω) and SSM anodes (678 Ω). Study infers that, development of electrochemical double layer capacitance makes SSM-PANi/FAC, a potential capacitive anode for augmenting bio-electrocatalytic activity and reducing Ohmic losses.

Improved Simultaneous Decolorization and Power Generation in a Microbial Fuel Cell with the Sponge Anode Modified by Polyaniline and Chitosan

In recent years, microbial fuel cell (MFC) has been regarded as a promising technology for dye wastewater treatment. Compared with traditional anaerobic reactors, MFC has better decolorization effect while producing electricity simultaneously. In this paper, a double-chamber MFC with the sponge anode modified by polyaniline and chitosan-NCNTs was employed for simultaneous azo dye decolorization and bioelectricity generation. The influence of dye concentration, co-substrate concentration, and operating temperature on the performance of MFC with the modified anodes were studied. The results showed that a high decolorization efficiency (98.41%) and maximum power density (2816.67 mW m^-3) of MFC equipped with modified bioanodes were achieved due to the biocompatibility and bioelectrocatalysis of modified material. And the biomass on the modified anode's surface was increased by 1.47 times. Additionally, microbial community analysis revealed that the modification of polyaniline and chitosan-NCNTs improved the selective enrichment of specific communities and the main microorganism was the electroactive and decolorizing bacteria Enterobacter (62.84%). Therefore, the composite anode is capable of fully utilizing the synergistic role of various materials, leading to superior performance of dye decolorization in MFCs. This work provided a strategy for the research on the recovery of biomass energy and decolorization in wastewater treatment. Graphical Abstract.

Application of advanced anodes in microbial fuel cells for power generation: A review

Microbial fuel cells (MFCs) the most extensively described bioelectrochemical systems (BES), have been made remarkable progress in the past few decades. Although the energy and environment benefits of MFCs have been recognized in bioconversion process, there are still several challenges for practical applications on large-scale, particularly for relatively low power output by high ohmic resistance and long period of start-up time. Anodes serving as an attachment carrier of microorganisms plays a vital role on bioelectricity production and extracellular electron transfer (EET) between the electroactive bacteria (EAB) and solid electrode surface in MFCs. Therefore, there has been a surge of interest in developing advanced anodes to enhance electrode electrical properties of MFCs. In this review, different properties of advanced materials for decorating anode have been comprehensively elucidated regarding to the principle of well-designed electrode, power output and electrochemical properties. In particular, the mechanism of these materials to enhance bioelectricity generation and the synergistic action between the EAB and solid electrode were clarified in detail. Furthermore, development of next generation anode materials and the potential modification methods were also prospected.

Composite of medium-chain-length polyhydroxyalkanoates-co-methyl acrylate and carbon nanotubes as innovative electrodes modifier in microbial fuel cell

A microbial fuel cell is a sustainable and environmental-friendly device that combines electricity generation and wastewater treatment through metabolic activities of microorganisms. However, low power output from inadequate electron transfer to the anode electrode hampers its practical implementation. Nanocomposites of oxidized carbon nanotubes and medium-chain-length polyhydroxyalkanoates (mcl-PHA) grafted with methyl acrylate monomers enhance the electrochemical function of electrodes in microbial fuel cell. Extensive polymerization of methyl acrylate monomers within mcl-PHA matrix, and homogenous dispersion of carbon nanotubes within the graft matrix are responsible for the enhancement. Modified electrodes exhibit high conductivities, better redox peak and reduction of cell internal resistance up to 76%. A stable voltage output at almost 700 mV running for 225 H generates maximum power and current density of 351 mW/m² and 765 mA/m² , respectively. Superior biofilm growth on modified surface is responsible for improved electron transfer to the anode hence stable and elevated power output generation.

Concomitant use of Azolla derived bioelectrode as anode and hydrolysate as substrate for microbial fuel cell and electro-fermentation applications

The potential of deoiled Azolla pinnata biomass (DAB) as electrode and substrate was evaluated for microbial fuel cell (MFC) operation. The anode electrode was fabricated using biochar obtained by subjecting DAB to pyrolysis at 600 °C, while the reducing sugars after hydrolysis of DAB by acid pretreatment was used as substrate. The post pyrolyzed biochar (P-DAB) was characterized for structural and elemental functionalities using SEM, XRD and Raman spectroscopy, whereas the reducing sugar obtained from hydrolyzed DAB (H-DAB) was analyzed for its composition. Experimental results indicated that at a given 3 g COD/L resulted in a voltage of 382 mV with 65.6% of COD reduction in closed circuit (CC) mode of operation. Cyclic voltammetric analysis depicted maximum oxidative and reductive peak currents of 3.42 mA and -4.0 mA. Noticeable peaks were also identified in CC (-0.2 V to +0.2 V and -0.19 V to -0.3 V) and OC (+0.2 V to +0.4 V and -0.1 V to -0.3 V) corresponding to complex IV cytochrome c couples (cytochrome C_ox (Cyt C_ox)/cytochrome C_rd (Cyt C_rd)), signifying the participation of electron carriers during electron transfer. The microbiome diversity showed dominance of Proteobacteria, a phylum known for exo-electrogenic bacterial species. The DAB-derived products account to environmental sustainability and support circular bioeconomy in a biorefinery mode.

Investigation of CNT/PPy-Modified Carbon Paper Electrodes under Anaerobic and Aerobic Conditions for Phenol Bioremediation in Microbial Fuel Cells

The study presents the comparative bioelectrochemical treatment of phenol in anodic and cathodic compartments of four identical dual chambered microbial fuel cells (MFCs) with bare and multiwalled carbon nanotube/polypyrrole (MWCNT/PPy)-coated electrodes, respectively. It was observed that systems performing biocathodic treatment of phenol performed better as compared to the systems performing bioanodic treatment. The maximum power densities for bioanodic phenol treatment using bare and coated electrodes were found to be 469.038 and 560.719 mW/m2, while for biocathodic treatment, they were observed to be 604.804 and 650.557 mW/m2, respectively. The MFCs performing biocathodic treatment of phenol consistently showed higher chemical oxygen demand removal efficiency, Coulombic efficiency, and power density and indicated the better performance of the biocathodic bare (B-MFC) and coated (C-MFC) MFCs as compared to the bioanodic B-MFC and C-MFC. UV/vis spectrophotometry revealed that the MWCNT/PPy-coated carbon paper worked significantly better in the treatment of phenol with admirable treatment obtained within a week of the experiment as compared to the system with bare carbon paper. Cyclic voltammetry asserted better electrochemical activity of the MFC systems with coated electrodes in the treatment of phenol. The electrochemical impedance spectroscopy data also supported the better performance of biocathodic phenol treatment with lower internal and charge transfer resistances. The scanning electron microscopy images confirmed the active biofilm formation on the electrode surface. The study indicates MFC as a viable option for the treatment of recalcitrant chemical compounds with energy recovery.

Efficient removal of Alizarin Red S from aqueous solution by polyethyleneimine functionalized magnetic carbon nanotubes

Alizarin Red S (ARS) has been extensively used in the dyeing industry. In order to effectively remove the ARS form dyeing wastewater, polyethyleneimine (PEI)-functionalized magnetic carbon nanotubes (PEI@MCNTs) adsorbent was successfully prepared and its adsorption performances were also investigated in detail. The PEI@MCNTs could efficiently remove the ARS from acidic aqueous solution (pH ≤ 6.0) within 40 min under room temperature. Benefiting from a large number of adsorption sites and multiple interactions, PEI@MCNTs possessed high selectivity towards ARS with spontaneous adsorption process. The maximum adsorption capacity of PEI@MCNTs for ARS was 196.08 mg g^-1 obtained from Langmuir isotherm, higher than that of available conventional adsorbents. Moreover, the PEI@MCNTs could be easily collected by an external magnet, and then effectively regenerated through 10 mM NaOH solution. The prepared PEI@MCNTs could be considered as the promising adsorbent for the removal of anthraquinone dyes in large-scale wastewater treatment.

Capacitive biocathodes driving electrotrophy towards enhanced CO2 reduction for microbial electrosynthesis of fatty acids

Electron transfer towards biocathode is a rate limiting step for CO₂ reduction during microbial electrosynthesis (MES). Current study is designed to offer an understanding on electrotrophy using four different electrode materials viz., carbon cloth (CC), stainless-steel mesh (SS), combination of both (CC-SS) and a hybrid material (CC-SS-AC with activated carbon (AC)) as capacitive biocathodes for MES. Non turn-over and turn-over electrochemical investigations revealed electrode properties in terms of electron transfer, capacitance and redox catalytic currents relatively higher with CC-SS-AC and CC-SS. Acetic acid production was higher in CC-SS-AC (4.31 g/l) than CC-SS (4.21 g/l), CC (3.5 g/l) and SS (2.83 g/l) along with noticeable ethanol production with all the biocathodes except SS. Interestingly, long-term operation of all biocathodes witnessed reduction in resistance visualized through Nyquist impedance spectra relatively efficient with CC-SS-AC. Biocompatible property of CC-SS-AC with increased surface area was presumed to be a critical factor for enhancing electrotrophy linked with capacitive nature of biocathode towards enhanced bioelectrochemical CO₂ reduction.

Potential applications of algae in the cathode of microbial fuel cells for enhanced electricity generation with simultaneous nutrient removal and algae biorefinery: Current status and future perspectives

Production of biofuels and other value-added products from wastewater along with quality treatment is an uttermost necessity to achieve environmental sustainability and promote bio-circular economy. Algae-Microbial fuel cell (A-MFC) with algae in cathode chamber offers several advantages e.g. photosynthetic oxygenation for electricity recovery, CO₂-fixation, wastewater treatment, etc. However, performance of A-MFC depends on several operational parameters and also on electrode materials types; therefore, enormous collective efforts have been made by researchers for finding optimal conditions in order to enhance A-MFC performance. The present review is a comprehensive snapshot of the recent advances in A-MFCs, dealing two major parts: 1) the power generation, which exclusively outlines the effect of different parameters and development of cutting edge cathode materials and 2) wastewater treatment at cathode of A-MFC. This review provides fundamental knowledge, critical constraints, current status and some insights for making A-MFC technology a reality at commercial scale operation.