The significance of biomass in a circular economy

A megatransposon drives the adaptation of Thermoanaerobacter kivui to carbon monoxide

Acetogens are promising industrial biocatalysts for upgrading syngas, a gas mixture containing CO, H2 and CO2 into fuels and chemicals. However, CO severely inhibits growth of many acetogens, often requiring extensive adaptation to enable efficient CO conversion (carboxydotrophy). Here, we adapt the thermophilic acetogen Thermoanaerobacter kivui to use CO as sole carbon and energy source. Isolate CO-1 exhibits rapid growth on CO and syngas (co-utilizing CO, H2 and CO2) in batch and continuous cultures (µmax ~ 0.25 h-1). The carboxydotrophic phenotype is attributed to the mobilization of a CO-dependent megatransposon originating from the locus responsible for autotrophy in T. kivui. Transcriptomics reveal the crucial role the redox balance plays during carboxydotrophic growth. These insights are exploited to rationally engineer T. kivui to grow on CO. Collectively, our work elucidates a primary mechanism responsible for the acquisition of carboxydotrophy in acetogens and showcases how transposons can orchestrate evolution.

Efficiently enhanced short-chain fatty acids (SCFAs) recovery from food waste condensate: Real-time wettability monitoring with supported liquid membrane contactor

Food waste condensate (FWC) is a valuable source for recovering short-chain fatty acids (SCFAs) through methods such as supported liquid membrane contactors. Containing organic compounds like acetate, propionate, and butyrate, FWC offers a rich substrate for efficient SCFA extraction. Recovering SCFAs from FWC provides notable environmental advantages, including reducing waste and generating high-value products for industries such as bioenergy and chemical production. This process not only contributes to carbon neutrality by recycling waste streams but also establishes a sustainable method for producing bio-based products from FWC. This study investigated the recovery efficiency and transport mechanisms of SCFAs from SCFA-rich wastewater (e.g., FWC) using both virgin hydrophobic PVDF membranes and membranes filled with organic extractants like tertiary amines (trihexhylamine and trioctylamine) and tertiary phosphines (trihexylphosphine and trioctylphosphine). Recovery efficiency for butyric acid was significantly improved when TOA (trioctylamine) was used, achieving 71.96 %, while acetic acid showed a lower recovery of 0.95 %, highlighting TOA's strong affinity for butyric acid due to ion-amine complex formation. The study also utilized real-time optical coherence tomography (OCT)-based monitoring to observe membrane wetting, finding that the virgin PVDF membrane was more prone to wetting and fouling, with a significant reduction in contact angle and surface energy. In contrast, the PVDF-TOA membrane demonstrated better resistance to wetting, showing minimal changes in contact angle and porosity, underscoring its potential for long-term applications in membrane contactors.

Potential of carbon micro/nanofibers derived from lignocellulose biomass valorisation for CO2 adsorption: A review on decarbonization biotechnology for climate change solutions

Biomass, as a source of lignocellulose, can be valorized into carbon micro/nanofibers for adsorbing greenhouse gas (GHGs) emissions, especially CO2. This article is derived from systematic evidence evaluation of published studies, presenting new, innovative, and systemic approaches to lignocellulose-based carbon micro/nanofiber studies. The review covers a general overview of carbon micro/nanofiber studies, mapping chronicles of the studies, carbon micro/nanofiber types for CO2 uptake, carbon micro/nanofibers fabrication and characterization, obtained carbonaceous material activation and performances, regulatory frameworks, and sustainability. The published studies show that carbon fiber has been researched for GHG emissions adsorption since the 1950s, with an increasing trend of publication numbers. The trend of studies has commenced from activated carbon to nanocarbonaceous materials and their composites. The excellent performance of both micro/nano-sized carbon provides promising opportunities for absorbing CO2 and other GHGs, such as NO2 and CH4, facilitating decarbonization. Several types of carbonaceous activation processes and modifications were utilized to enhance the performances of the resultant biochars, especially in surface materials, CO2 adsorption capacity, and CO2 selectivity. Proposed mechanisms for the absorption of CO2 by activated carbonaceous materials through physisorption and chemisorption were also observed. To date, regulatory frameworks on the use of activated carbon for CO2 capture are still rarely found, but biochar has been mainstreamed and regulated internationally for CO2 removal. Other regulations have been enacted but have not yet internationally harmonized, mostly focusing on the terminology of carbon nanotubes, characterization, general applications, labelling, packaging, transportation, and the effects of toxicity on health. This study also proposed the sustainability aspects and performance indicators that can be used for circular economy application with an ultimate goal of climate change mitigation through GHG reduction. Besides the regulatory framework, elements of the business model and sustainability were proposed in the circular economy framework of the fibers. By scoping carbon micro/nanofibers studies, it is shown with obvious evidence that carbon micro/nanofibers and their composites have the potential for CO2 adsorption and removal, leading to the acceleration of the decarbonization process that is in line with the Paris Agreement, especially in applying innovative CO2 capture, storage, and utilization (CCSU) technologies.

Life cycle approach as a tool for assessing municipal biowaste treatment units: A systematic review

Biowaste is an increasingly relevant environmental issue worldwide, causing significant environmental, economic and social impacts. Effective strategies are crucial to mitigate impacts, maximising biowaste's valorisation. This article presents a systematic literature review on using life cycle assessment (LCA) to evaluate municipal biowaste treatment facilities. The primary objective was to analyse how LCA is applied to assess the environmental efficiency of mechanical and biological treatment involving composting and anaerobic digestion (AD)-based systems. The article addressed the methodological heterogeneity across previous LCA studies, identifying critical gaps and challenges regarding standardisation and result comparability. It underscores the importance of accurately considering environmental indicators and emission factors, as these significantly affect overall LCA outcomes. Results show that most publications focus on Europe and Asia, highlighting a research gap in regions like Africa. The organic fraction municipal solid waste is the predominant feedstock, and 1 tonne of biowaste was the frequently used functional unit, reflecting the upstream impacts of waste. The most recurrent system boundary was the cradle-to-grave, offering a comprehensive analysis as it covers all stages of biowaste treatment from collection to disposal. The studies highlight the environmental benefits of AD-based systems through energy production compensations, particularly in reducing global warming potential, compared with other treatment operations such as landfills. While replacing mineral fertilisers with digestate and compost is very well discussed, it raises concerns about heavy metal content and nutrient availability. Therefore, selective collection of organic waste is crucial to improve compost quality and AD efficiency, though it increases transportation costs.

Promoting the Emerging Role of Pulse By-Products as Valuable Sources of Functional Compounds and Novel Food Ingredients

The growth of the human population worldwide has increased food demand, generating the massive production of foods and consequently causing enormous production of waste every year. The indiscriminate exploitation of the already limited natural resources has also generated serious environmental and economic crises. The use, or reuse, of waste or by-products represents a viable solution to constrain the problem by promoting alternative routes of exploitation with multiple food and biotechnological applications. This review focuses on the most recent advances in the valorization of food by-products, with specific reference to legume-derived by-products. The main technological solutions for reintroducing and/or valorizing food waste are reported together with a critical discussion of the main pros and cons of each alternative, supported by practical case studies whenever available. First, the possibility to exploit the by-products as valuable sources of functional compounds is presented by reviewing both conventional and innovative extraction techniques tailored to provide functional extracts with multiple food, pharmaceutical, and biotechnological applications. Second, the possibility to valorize the by-products as novel food ingredients by inclusion in different formulations, either as a whole or as hydrolyzed/fermented derivatives, is also presented and discussed. To the best of our knowledge, several of the technological solutions discussed have found only limited applications for waste or by-products derived from the legume production chain; therefore, great efforts are still required to gain the full advantages of the intrinsic potential of pulse by-products.

In-situ biological biogas upgrading using upflow anaerobic polyfoam bioreactor: Operational and biological aspects

A high rate upflow anaerobic polyfoam-based bioreactor (UAPB) was developed for lab-scale in-situ biogas upgrading by H2 injection. The reactor, with a volume of 440 mL, was fed with synthetic wastewater at an organic loading rate (OLR) of 3.5 g COD/L·day and a hydraulic retention time (HRT) of 7.33 h. The use of a porous diffuser, alongside high gas recirculation, led to a higher H2 liquid mass transfer, and subsequently to a better uptake for high CH4 content of 56% (starting from 26%). Our attempts to optimize both operational parameters (H2 flow rate and gas recirculation ratio, which is the total flow rate of recirculated gas over the total outlet of gas flow rate) were not initially successful, however, at a very high recirculation ratio (32) and flow rate (54 mL/h), a significant improvement of the hydrogen consumption was achieved. These operational conditions have in turn driven the methanogenic community toward the dominance of Methanosaetaceae, which out-competed Methanosarcinaceae. Nevertheless, highly stable methane production rates of 1.4-1.9 L CH4/Lreactor.day were observed despite the methanogenic turnover. During the different applied operational conditions, the bacterial community was especially impacted, resulting in substantial shifts of taxonomic groups. Notably, Aeromonadaceae was the only bacterial group positively correlated with increasing hydrogen consumption rates. The capacity of Aeromonadaceae to extracellularly donate electrons suggests that direct interspecies electron transfer (DIET) enhanced biogas upgrading. Overall, the proposed innovative biological in-situ biogas upgrading technology using the UAPB configuration shows promising results for stable, simple, and effective biological biogas upgrading.

A thorough overview of the literature on waste recycling in the circular economy: current practices and future perspectives

To develop a circular economy (CE) and protect the environment, waste recycling (WR) is crucial. This study examines WR research conducted over the past two decades to identify the most significant advancements and promising areas for future research. The following challenges were handled through text mining, content, and bibliometrics analysis: How has CE influenced the evolution of WR research? What are the CE's most important WR research trends and themes? What directions could future research on WR take regarding the CE transition? Using 1118 articles from the Scopus database journal, bibliometric networks were made and analyzed. Hence, five critical CE-related problems needing further research were recognized: waste recycling is the first cluster, followed by technology, the CE transformation, plastic waste, and waste management (WM). Examining WM and inclusive waste reduction practices and their distinct highlight patterns may impact future research fields and serve as a transitional tool to CE (which aims to minimize waste generation). Forthcoming research targets contain waste reduction and incorporation of WR into the CE framework.

Engineering Lewis-Acid Defects on ZnO Quantum Dots by Trace Transition-Metal Single Atoms for High Glycerol-to-Glycerol Carbonate Conversion

Efficient conversion of biomass wastes into valuable chemicals has been regarded as a sustainable approach for green and circular economy. Herein, a highly efficient catalytic conversion of glycerol (Gly) into glycerol carbonate (GlyC) by carbonylation with the commercially available urea is presented using low-cost transition metal single atoms supported on zinc oxide quantum dots (M1-ZnO QDs) as a catalyst without using any solvent. A facile one-step wet chemical synthesis allows various types of metal single atoms to simultaneously dope and introduce Lewis-acid defects in the ZnO QD structure. It is found that doping with a trace amount of isolated metal atoms greatly boosts the catalytic activity with Gly conversion of 90.7%, GlyC selectivity of 100.0%, and GlyC yield of 90.6%. Congruential results from both Density Functional Theory (DFT) and in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (in situ DRIFTS) studies reveal that the superior catalytic performance can be attributed to the enriched Lewis acid sites that endow optimal adsorption, formation of the intermediate for coupling between urea and Gly, and desorption of GlyC. Moreover, the tiny size of ZnO QDs efficiently promotes the accessibility of these active sites to the reactants.

Sustainability and circularity assessment of biomass-based energy supply chain

Climate change and other environmental consequences of socio-economic activities require a more sustainable and circular growth. At the same time, the limitation of the earth resource demands industries to improve resource efficiency and increase the rate of recycling of materials. There are several sustainable and circular alternatives that the industries may adopt. However, the question is that among these alternatives, which one should be selected for implementation for the highest sustainable and circular benefits. This study introduces a novel tool for assessing the sustainability and circularity of biomass-based energy supply chains, integrating multi-criteria decision-making methods with life cycle thinking approach. It evaluates five alternatives using a sustainability and circularity indicators, offering new insights into the deloyment of circular business models at companies in biomass-based energy supply chain. The tool is also applied to a specific rice straw supply chain in Italy, to assess the sustainability and circularity of five alternatives and outrank them. The results indicated that not all the alternatives are better in terms of supporting sustainable development and circular economy, compared to the baseline business model. In this supply chain, the extended lifetime for digestate from the aerobic digestion plant is the most 'sustainable and circular' alternative, while the capture of carbon dioxide from the same plant and its use for microalgae cultivation is the least 'sustainable and circular' alternative. A sensitivity analysis was conducted on different weighting sets during the assessment. It indicated that the priority of the decision makers can slightly change the outrank of the alternatives and the magnitude of the outranks.

Integrated processes for olive mill wastewater treatment and its revalorization for microalgae culture

The olive oil industry generates 30 million cubic meters of olive mill wastewaters (OMWWs) annually. OMWWs are a major environmental concern in the Mediterranean region due to their high organic matter content, suspended solids, unpleasant odor, and dark color. The application of primary treatments such as coagulation-flocculation, adsorption, and hybrid systems combining coagulation-flocculation with adsorption has enabled to remove part of the organic matter, color, turbidity, and growth-inhibiting compounds from OMWWs. Among these methods, the hybrid system combining activated carbon and chitosan has proven to be the best removal efficiency. Subsequently, secondary treatment involving the cultivation of Chlorella sp. on OMWWs pretreated with chitosan achieved the highest maximal specific growth rate (0.513 ± 0.022 day⁻1) and biomass productivity (0.621 ± 0.021 g/L/day). Notably, the fatty acids (FA) profile produced by Chlorella sp. cells grown under these conditions differed, underscoring the potential of OMWWs as a microalgal growth medium. This innovative approach not only addresses environmental issues but also opens new avenues for sustainable bioproducts.

Aquaponic growth of basil (Ocimum basilicum) with African catfish (Clarias gariepinus) in standard substrate combined with a Humicacid Fiber-Substrate (HFS)

A major challenge in agriculture, horticulture and aquaponics practices is the reduction of mineral fertilisers and peat to reduce CO2 emissions and increase sustainability. This study used a three-phase-natural fertiliser, the Humicacid Fiber-Substrate (HFS), made from natural regenerative organic and mineral-fractions (Humus-Mineral-Complex), to reduce the peat content in plant pots for aquaponics farming. Basil (Ocimum basilicum) growth was compared with i) 100% standard media substrate ("Einheitserde", white peat 80%, clay 20%), and ii) 85% "Einheitserde" and 15% of HFS under irrigation with aquaculture process waters from an extensive and intensive production of African catfish (Clarias gariepinus) under coupled aquaponic conditions. The substitution with 15% HFS and use of intensive fish water resulted in comparable plant growth to a fertiliser solution as control, and in higher leaf width and leaf green weight and lower root dry weight compared with the standard media substrate "Einheitserde". Basil leaf chlorophyll content from the aquaponics was higher compared with local market plants. This suggests the possible substitution of the peat substrate "Einheitserde" with at least 15% HFS to reduce the natural peat fraction. Further studies on crop-specific substrates are needed to reduce peat in aquaponics farming plant cultivation.

Study on Fast Liquefaction and Characterization of Produced Polyurethane Foam Materials from Moso Bamboo

Although bamboo is widely distributed in Japan, its applications are very limited due to its poor combustion efficiency for fuel. In recent years, the expansion of abandoned bamboo forests has become a social issue. In this research, the possibility of a liquefaction process with fast and efficient liquefaction conditions using moso bamboo as raw material was examined. Adding 20 wt% ethylene carbonates to the conventional polyethylene glycol/glycerol mixed solvent system, the liquefaction time was successfully shortened from 120 to 60 min. At the same time, the amount of sulfuric acid used as a catalyst was reduced from 3 wt% to 2 wt%. Furthermore, polyurethane foam was prepared from the liquefied product under these conditions, and its physical properties were evaluated. In addition, the filler effects of rice husk biochar and moso bamboo fine meals for the polyurethane foams were characterized by using scanning electron microscopy (SEM) and thermogravimetry and differential thermal analysis (TG-DTA), and the water absorption and physical density were measured. As a result, the water absorption rate of bamboo fine meal-added foam and the thermal stability of rice husk biochar-added foam were improved. These results suggested that moso bamboo meals were made more hydrophilic, and the carbon content of rice husk biochar was increased.

Optimisation of the biological production of levulinic acid in a mixed microbial culture fed with synthetic grape pomace

Levulinic acid (LA) is a polymer with a vast industrial application range and can be co-produced as a minor by-product during the biological production of polyhydroxyalkanoates (PHA). However, the influence of key parameters as tools for favouring the production of LA over PHA is still unclear. In this study, we investigated how several critical operational conditions, i.e., carbon-nitrogen ratio (C/N), organic loading rate (OLR) and airflow, can be optimised to favour LA accumulation over PHA production by a mixed microbial culture (MMC), using synthetic grape pomace (GP) hydrolysate as the substrate. The results showed that it was possible to direct the MMC towards LA accumulation instead of PHA. The maximum LA yield was 2.7 ± 0.2 g LA/(L·d) using a C/N of 35, an airflow of 5 L/min and an OLR of 4 g sCOD/(L·d). The OLR and, to a lesser extent, the C/N ratio were the main factors significantly and positively correlated with the biological synthesis of LA.

CO2 supply is a powerful tool to control homoacetogenesis, chain elongation and solventogenesis in ethanol and carboxylate fed reactor microbiomes

Anaerobic fermentation technology enables the production of medium chain carboxylates and alcohols through microbial chain elongation. This involves steering reactor microbiomes to yield desired products, with CO2 supply playing a crucial role in controlling ethanol-based chain elongation and facilitating various bioprocesses simultaneously. In the absence of CO2 supply (Phase I), chain elongation predominantly led to n-caproate with a high selectivity of 96 Cmol%, albeit leaving approximately 80% of ethanol unconverted. During this phase, C. kluyveri and Proteiniphilum-related species dominated the reactors. In Phase II, with low CO2 input (2.0 NmL L-1 min-1), formation of n-butyrate, butanol, and hexanol was stimulated. Increasing CO2 doses in Phase III (6 NmL L-1 min-1) led to CO2 utilization via homoacetogenesis, coinciding with the enrichment of Clostridium luticellarii, a bacterium that can use CO2 as an electron acceptor. Lowering CO2 dose to 0.5 NmL L-1 min-1 led to a shift in microbiome composition, diminishing the dominance of C. luticellarii while increasing C. kluyveri abundance. Additionally, other Clostridia, Proteiniphilum, and Lactobacillus sakei-related species became prevalent. This decrease in CO2 load from 6 to 0.5 NmL L-1 min-1 minimized excessive ethanol oxidation from 30%-50% to 0%-3%, restoring a microbiome favoring net n-butyrate consumption and n-caproate production. The decreased ethanol oxidation coincided with the resurgence of hydrogen formation at partial pressures above 1%. High concentrations of butyrate, caproate, and ethanol in the reactor, along with low acetate concentration, promoted the formation of butanol and hexanol. It is evident that CO2 supply is indispensable for controlling chain elongation in an open culture and it can be harnessed to stimulate higher alcohol formation or induce CO2 utilization as an electron acceptor.

Structure-activity relationships of bioactive polysaccharides extracted from macroalgae towards biomedical application: A review

Macroalgae are valuable and structurally diverse sources of bioactive compounds among marine resources. The cell walls of macroalgae are rich in polysaccharides which exhibit a wide range of biological activities, such as anticoagulant, antioxidant, antiviral, anti-inflammatory, immunomodulatory, and antitumor activities. Macroalgae polysaccharides (MPs) have been recognized as one of the most promising candidates in the biomedical field. However, the structure-activity relationships of bioactive polysaccharides extracted from macroalgae are complex and influenced by various factors. A clear understanding of these relationships is indeed critical in developing effective biomedical applications with MPs. In line with these challenges and knowledge gaps, this paper summarized the structural characteristics of marine MPs from different sources and relevant functional and bioactive properties and particularly highlighted those essential effects of the structure-bioactivity relationships presented in biomedical applications. This review not only focused on elucidating a particular action mechanism of MPs, but also intended to identify a novel or potential application of these valued compounds in the biomedical field in terms of their structural characteristics. In the last, the challenges and prospects of MPs in structure-bioactivity elucidation were further discussed and predicted, where they were emphasized on exploring modern biotechnology approaches potentially applied to expand their promising biomedical applications.

Valorization of biomass polyphenols as potential tyrosinase inhibitors

Tyrosinases (TYRs; EC 1.14.18.1) catalyze two sequential oxidative reactions of the melanin biosynthesis pathway and play an important role in mammalian pigmentation and enzymatic browning of fruit and vegetables. Inhibition of TYR activity is therefore an attractive target for new drugs and/or food ingredients. In addition, increasing evidence suggests that TYR regulation could be a novel target for treatments of cancer and Parkinson's disease. Biomasses, notably industrial byproducts and biowaste, are good sustainable sources of phytochemicals that may be valorized into bioactive compounds including TYR inhibitors. This review presents potential applications of biomass-derived polyphenols targeting TYR inhibition. Insights into structure-activity relationships of several polyphenols and their glycosides are highlighted. Finally, some remarks and perspectives on research into new TYR inhibitors from biomass waste are provided.

Natural Products Derived Porous Carbons for CO2 Capture

As it is now established that global warming and climate change are a reality, international investments are pouring in and rightfully so for climate change mitigation. Carbon capture and separation (CCS) is therefore gaining paramount importance as it is considered one of the powerful solutions for global warming. Sorption on porous materials is a promising alternative to traditional carbon dioxide (CO2 ) capture technologies. Owing to their sustainable availability, economic viability, and important recyclability, natural products-derived porous carbons have emerged as favorable and competitive materials for CO2 sorption. Furthermore, the fabrication of high-quality value-added functional porous carbon-based materials using renewable precursors and waste materials is an environmentally friendly approach. This review provides crucial insights and analyses to enhance the understanding of the application of porous carbons in CO2 capture. Various methods for the synthesis of porous carbon, their structural characterization, and parameters that influence their sorption properties are discussed. The review also delves into the utilization of molecular dynamics (MD), Monte Carlo (MC), density functional theory (DFT), and machine learning techniques for simulating adsorption and validating experimental results. Lastly, the review provides future outlook and research directions for progressing the use of natural products-derived porous carbons for CO2 capture.

Examining and prioritizing the effect of sustainable energy on the job market to advance China's green workforce

China, the world's greatest emitter of greenhouse gases, has committed to reaching peak carbon dioxide emissions by 2030 and carbon neutrality by 2060. One strategy to accomplish this aim is switching to a low-carbon economy via advancing renewable energy (RE) projects. Therefore, this study focuses on solar, wind, biomass, and hydropower and examines the beneficial employment effects of RE projects in China. The study uses fuzzy-based Multi-Criteria Decision Making (MCDM) methodologies, such as the Analytical Hierarchy Process (AHP) and Weighted Aggregated Sum Product Assessment (WASPAS), to evaluate numerous employment effect criteria and sub-criteria. Based on these evaluations, the report prioritizes four main types of RE projects. According to the fuzzy AHP technique results, direct employment, skill requirements, and local employment are the most crucial employment effect factors. The study then employed the fuzzy WASPAS approach to assessing various RE initiatives' employment prospects. According to the findings, hydropower is the best choice for creating jobs, followed by wind and solar power initiatives. In recent years, the hydro, wind, and solar power industries have experienced rapid expansion, creating numerous job possibilities in production, installation, operation, and maintenance. Additionally, creating RE projects can boost regional economic growth and lessen poverty.

Forest Supply Chain for Bioenergy: An Approach for Biomass Study in the Framework of a Circular Bioeconomy

To ensure the long-term viability of a circular bioeconomy based on native forests, it is crucial to enhance our understanding and overcome existing disparities in knowledge and application throughout the entire value chain of forest products. The objective of this article is to contribute towards this goal and facilitate the proper management of forest biomass. Firstly, a methodology is proposed for the study of biomass throughout the native forest value chain, identifying the main steps, criteria, and variables to consider. This approach is evaluated through a case study in Argentina, where over 2370 tons of biomass are wasted annually. A series of strategies for analyzing the most suitable uses and applications for this biomass are examined. Finally, some key approaches for the promotion of a circular and sustainable forest bioeconomy are identified. While it is true that there is still a long way to go before small rural economies can make a more efficient and comprehensive use of their resources (potentially including small biorefineries) with appropriate cascade use schemes, moving towards biomass energy use constitutes a practical and concrete alternative today. This proposal provides tools for accelerating this necessary ecological and energy transition.

Radical-Mediated Photocatalysis for Lignocellulosic Biomass Conversion into Value-Added Chemicals and Hydrogen: Facts, Opportunities and Challenges

Photocatalytic biomass conversion into high-value chemicals and fuels is considered one of the hottest ongoing research and industrial topics toward sustainable development. In short, this process can cleave Cβ -O/Cα -Cβ bonds in lignin to aromatic platform chemicals, and further conversion of the polysaccharides to other platform chemicals and H2 . From the chemistry point of view, the optimization of the unique cooperative interplay of radical oxidation species (which are activated via molecular oxygen species, ROSs) and substrate-derived radical intermediates by appropriate control of their type and/or yield is key to the selective production of desired products. Technically, several challenges have been raised that face successful real-world applications. This review aims to discuss the recently reported mechanistic pathways toward selective biomass conversion through the optimization of ROSs behavior and materials/system design. On top of that, through a SWOT analysis, we critically discussed this technology from both chemistry and technological viewpoints to help the scientists and engineers bridge the gap between lab-scale and large-scale production.

Evaluation of Nanaerobic Digestion as a Mechanism to Explain Surplus Methane Production in Animal Rumina and Engineered Digesters

Nanaerobes are a newly described class of microorganisms that use a unique cytochrome bd oxidase to achieve nanaerobic respiration at <2 μM dissolved oxygen (∼1% of atmospheric oxygen) but are not viable above this value due to the lack of other terminal oxidases. Although sharing an overlapping ecological niche with methanogenic archaea, the role of nanaerobes in methanogenic systems has not been studied so far. To explore their occurrence and significance, we re-analyzed published meta-omic datasets from animal rumina and waste-to-energy digesters, including conventional anaerobic digesters and anaerobic digesters with ultra-low oxygenation. Results show that animal rumina share broad similarities in the microbial community and system performance with oxygenated digesters, rather than with conventional anaerobic digesters, implying that trace levels of oxygen drive the efficient digestion in ruminants. The rumen system serves as an ideal model for the newly named nanaerobic digestion, as it relies on the synergistic co-occurrence of nanaerobes and methanogens for methane yield enhancement. The most abundant ruminal bacterial family Prevotellaceae contains many nanaerobes, which perform not only anaerobic fermentation but also nanaerobic respiration using cytochrome bd oxidase. These nanaerobes generally accompany hydrogenotrophic methanogens to constitute a thermodynamically and physiologically consistent framework for efficient methane generation. Our findings provide new insights into ruminal methane emissions and strategies to enhance methane generation from biomass.

Up-Cycling of Olea europaea L. Ancient Cultivars Side Products: Study of a Combined Cosmetic-Food Supplement Treatment Based on Leaves and Olive Mill Wastewater Extracts

In recent years, a reversal of the global economic framework has been taking place: from the linear model, there has been a gradual transition to a circular model where by-products from the agri-food industry are taken and transformed into value products (upcycling) rather than being disposed of. Olive tree pruning represents an important biomass currently used for combustion; however, the leaf part of the olive tree is rich in phenolic substances, including hydroxytyrosol. Mill wastewater is also discarded, but it still contains high amounts of hydroxytyrosol. In this study, cosmetic and food supplement formulations were prepared using biophenols extracted from leaves and wastewater and were tested in a placebo-controlled study on healthy volunteers using a combined cosmetic and food supplement treatment. A significant improvement in skin health indicators (collagen density, elasticity, etc.) and a 17% improvement against Photo-induced Irritative Stimulus was observed.

Impact of water as raw material on material circularity - A case study from the Hungarian food sector

Measuring circularity is necessary to prove the feasibility of transforming linear technologies into circular ones. However, most of the circular economic researches consider water only as a medium. Food industry processes are excellent examples of systems that are hard to break free from linearity, albeit not impossible. This paper explores solutions to include water in circularity calculations using a Hungarian poultry processing plant as a case study. Two circular economic indicators, the questionnaire-type Circular Economy Indicator Prototype (CEIP) and the product-centric Material Circularity Indicator (MCI and MCI') and the Water Footprint were examined in detail and modified to fit the needs of assessing circularity with water included as raw material. The calculations were supported by Life Cycle Assessment (LCA). The impact on circularity and the environment were quantified by considering different reuse scenarios. As the results of CEIP show, including water reuse in the technology or recycling for irrigation could increase the indicator values from low to medium-high level of circularity. However, the level of improvement highly depends on the amount of water used. LCA highlighted the significant environmental effects of packaging (<2% of product mass) and the relative benefits of recycling and reuse. The MCI' values (including water as raw material) increased from 0.171 to 0.848 when water demand was reduced by 50% and 100% reused within the processes. This led to a reduction of 76% in the environmental effect. On the other hand, Water Footprint analysis showed that 99% of the water is incorporated in the product itself; therefore, technological water consumption should be treated separately from broiler breeding. The results show that a fairly linear process can be directed towards circularity. However, environmental benefits are not guaranteed with higher circularity points, and recycling may lead to unexpected results.

Sustainable management of food waste; pre-treatment strategies, techno-economic assessment, bibliometric analysis, and potential utilizations: A systematic review

Food waste (FW) contains many nutritional components such as proteins, lipids, fats, polysaccharides, carbohydrates, and metal ions, which can be reused in some processes to produce value-added products. Furthermore, FW can be converted into biogas, biohydrogen, and biodiesel, and this type of green energy can be used as an alternative to nonrenewable fuel and reduce reliance on fossil fuel sources. It has been demonstrated in many reports that at the laboratory scale production of biochemicals using FW is as good as pure carbon sources. The goal of this paper is to review approaches used globally to promote turning FW into useable products and green energy. In this context, the present review article highlights deeply in a transdisciplinary manner the sources, types, impacts, characteristics, pre-treatment strategies, and potential management of FW into value-added products. We find that FW could be upcycled into different valuable products such as eco-friendly green fuels, organic acids, bioplastics, enzymes, fertilizers, char, and single-cell protein, after the suitable pre-treatment method. The results confirmed the technical feasibility of all the reviewed transformation processes of FW. Furthermore, life cycle and techno-economic assessment studies regarding the socio-economic, environmental, and engineering aspects of FW management are discussed. The reviewed articles showed that energy recovery from FW in various forms is economically feasible.

Sustainable management and recycling of anaerobic digestate solid fraction by composting: A review

The aim of the study was to review and discuss the management and recycling of anaerobic digestate solid fraction by composting process in the context of circular bioeconomy and sustainable development. The conversion of the solid fraction into compost can be recognized as novel process-enhancing supplements for land reclamation. Moreover, the solid fraction of the digestate is a valuable substrate for compost production, both as a monosubstrate and as a valuable additive for other raw materials to enrich in organic matter. These results should serve as reference point to target adjusting screws for anaerobic digestate solid fraction by composting process improvement, its implementation in modern bioeconomy perspective as well as provide a guideline for effective waste management.

Urban mining from biomass, brine, sewage sludge, phosphogypsum and e-waste for reducing the environmental pollution: Current status of availability, potential, and technologies with a focus on LCA and TEA

Rapid industrialization, improved standards of living, growing economies and ever-increasing population has led to the unprecedented exploitation of the finite and non-renewable resources of minerals in past years. It was observed that out of 100 BMT of raw materials processed annually only 10% is recycled back. This has resulted in a strenuous burden on natural or primary resources of minerals (such as ores) having limited availability. Moreover, severe environmental concerns have been raised by the huge piles of waste generated at landfill sites. To resolve these issues, 'Urban Mining' from waste or secondary resources in a Circular Economy' concept is the only sustainable solution. The objective of this review is to critically examine the availability, elemental composition, and the market potential of the selected secondary resources such as lignocellulosic/algal biomass, desalination water, sewage sludge, phosphogypsum, and e-waste for minerals sequestration. This review showed that, secondary resources have potential to partially replace the minerals required in different sectors such as macro and microelements in agriculture, rare earth elements (REEs) in electrical and electronics industry, metals in manufacturing sector and precious elements such as gold and platinum in ornamental industry. Further, inputs from the selected life cycle analysis (LCA) & techno economic analysis (TEA) were discussed which showed that although, urban mining has a potential to reduce the greenhouse gaseous (GHG) emissions in a sustainable manner however, process improvements through innovative, novel and cost-effective pathways are essentially required for its large-scale deployment at industrial scale in future.

Progress in thermochemical co-processing of biomass and sludge for sustainable energy, value-added products and circular economy

To achieve the main goal of net zero carbon emission, the shift from conventional fossil-based energy/products to renewable and low carbon-based energy/products is necessary. Biomass has been perceived as a carbon-neutral source from which energy and value-added products can be derived, while sludge is a slurry waste that inherently contains high amount of minerals and organic matters. Hence, thermochemical co-processing of biomass wastes and sludge could create positive synergistic effects, resulting in enhanced performance of the process (higher conversion or yield) and improved qualities or characteristics of the products as compared to that of mono-processing. This review presents the current progress and development for various thermochemical techniques of biomass-sludge co-conversion to energy and high-value products, and the potential applications of these products from circular economy's point of view. Also, these technologies are discussed from economic and environmental standpoints, and the outlook towards technology maturation and successful commercialization is laid out.

Spatial interaction effects on the relationship between agricultural economic and planting non-point source pollution in China

Solving the contradiction between agricultural economic growth and agricultural environmental problems is a difficult problem in regional environmental governance. Based on the panel data of 31 provinces, municipalities, and autonomous regions in China from 2000 to 2019, spatial Dubin model (SDM) is used to analyze the influence of agricultural economic growth and other factors on planting non-point source pollution. Innovate from the perspective of research objects and research methods, and the research results show (1) In the past 20 years, the amount of fertilizer applied and crop straw yield increased continuously. Through the fertilizer and farmland solid waste discharge of ammonia nitrogen (NH₃-N), total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD), calculation of the equal-standard discharges of planting non-point source pollution shows that China's planting non-point source pollution is serious. Among the investigated areas in 2019, the equal-standard discharges of planting non-point source pollution in Heilongjiang Province were the highest and have reached 24.35 × 10¹⁰ m³. (2) The global Moran index of 20 years in the study area shows obvious spatial aggregation and diffusion characteristics, and has a significant positive global spatial autocorrelation, indicating that planting non-point source pollution discharges of the study area have potential interdependence in space. (3) SDM time-fixed effect model showed that the equal-standard discharges of planting non-point source pollution had a significant negative spatial spillover effect, and the spatial lag coefficient was - 0.11. Among the influencing factors, agricultural economic growth, technological progress, financial support to agriculture level, consumption capacity, industrial structure, and risk perception have significant spatial spillover effects on planting non-point source pollution. The results of effect decomposition show that the positive spatial spillover effect of agricultural economic growth on adjacent areas is greater than the negative effect on the local area. Based on the analysis of significant influencing factors, the paper provides direction guidance for the formulation of planting non-point source pollution control policy.

Spotlighting of the role of catalysis for biomass conversion to green fuels towards a sustainable environment: Latest innovation avenues, insights, challenges, and future perspectives

Recently, extensive resources were dedicated to studying how to use catalysis to convert biomass into environmentally friendly fuels. Problems with this technology include the processing of lignocellulosic sources and the development/optimization of novel porous materials as efficient monofunctional and bifunctional catalysts for biomass fuel production. This paper reviews recent advancements in catalysts procedures. Besides, it offers assessments of the methods used in catalytic biomass pyrolysis. Understanding the catalytic conversion process of lignocellulosic biomass into bio-oil remains a key research challenge in biomass catalytic pyrolysis.

Biomass gasification to syngas in thermal water vapor arc discharge plasma

This study investigated biomass (wood pellets) gasification to syngas using direct current (DC) thermal arc plasma at atmospheric pressure. Water vapor was used as a main gasifying agent and a plasma-forming gas. The biomass gasification system was quantified in terms of the producer gas composition, the tar content, the H2/CO ratio, the carbon conversion efficiency, the energy conversion efficiency and the specific energy requirements. It was found that the gasification performance efficiency was highest at the water vapor-to-biomass ratio of 0.97. The producer gas was mostly composed of H2 (43.86 vol.%) and CO (30.93 vol.%), giving the H2/CO ratio of 1.42 and the LHV of 10.23 MJ/Nm3. However, high content of tars of 13.81 g/Nm3 was obtained in the syngas. The yield of H2 and CO was 48.31% and 58.13%, respectively, with the highest producer gas yield of 2.42 Nm3/kg biomass. The carbon conversion efficiency and the energy conversion efficiency were 100% and 48.83%, respectively, and the production of 1 kg of syngas required 1.78 kWh of electric energy input. Finally, the obtained results were compared with different plasma methods, including plasma-assisted application coupled with conventional gasification.

Effective removal of phosphorus from high phosphorus steel slag using carbonized rice husk

High phosphorus steel slag and carbonized rice husk are two common wastes characterized by high generation and low secondary use values. Through the reduction of high phosphorus steel slag by biomass, both wastes were fully utilized, thus reducing the negative impact on the environment. In this study, variables such as temperature, time, and amount of reactants were changed to determine the optimal conditions for the reaction of steel slag with carbonized rice husk at high temperatures. The actual amount of reducing agent consumed during the reduction was significantly greater than that predicted by theoretical calculations. Adding three carbon equivalent of carbonized rice husk and maintaining at 1500°C for 30 min could remove 79.25% of P₂O₅ in the slag. By modeling the material cycle in which high phosphorus steel slag was treated with biomass, the product could be used for crop growth. Meanwhile, the reduced iron and residual steel slag can be used to make steel again, thereby leading to a sharp reduction in fossil fuel usage and greenhouse gas emissions in this process.

Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects

The valorization and conversion of biomass into various value-added products and bioenergy play an important role in the realization of sustainable circular bioeconomy and net zero carbon emission goals. To that end, microwave technology has been perceived as a promising solution to process and manage oil palm waste due to its unique and efficient heating mechanism. This review presents an in-depth analysis focusing on microwave-assisted torrefaction, gasification, pyrolysis and advanced pyrolysis of various oil palm wastes. In particular, the products from these thermochemical conversion processes are energy-dense biochar (that could be used as solid fuel, adsorbents for contaminants removal and bio-fertilizer), phenolic-rich bio-oil, and H₂-rich syngas. However, several challenges, including (1) the lack of detailed study on life cycle assessment and techno-economic analysis, (2) limited insights on the specific foreknowledge of microwave interaction with the oil palm wastes for continuous operation, and (3) effects of tunable parameters and catalyst's behavior/influence on the products' selectivity and overall process's efficiency, remain to be addressed in the context of large-scale biomass valorization via microwave technology.

Bacterial-derived surfactants: an update on general aspects and forthcoming applications

The search for sustainable alternatives to the production of chemicals using renewable substrates and natural processes has been widely encouraged. Microbial surfactants or biosurfactants are surface-active compounds synthesized by fungi, yeasts, and bacteria. Due to their great metabolic versatility, bacteria are the most traditional and well-known microbial surfactant producers, being Bacillus and Pseudomonas species their typical representatives. To be successfully applied in industry, surfactants need to maintain stability under the harsh environmental conditions present in manufacturing processes; thus, the prospection of biosurfactants derived from extremophiles is a promising strategy to the discovery of novel and useful molecules. Bacterial surfactants show interesting properties suitable for a range of applications in the oil industry, food, agriculture, pharmaceuticals, cosmetics, bioremediation, and more recently, nanotechnology. In addition, they can be synthesized using renewable resources as substrates, contributing to the circular economy and sustainability. The article presents a general and updated review of bacterial-derived biosurfactants, focusing on the potential of some groups that are still underexploited, as well as, recent trends and contributions of these versatile biomolecules to circular bioeconomy and nanotechnology.

A typology of sustainable circular business models with applications in the bioeconomy

As an approach to sustainable development, circular business models are increasingly being developed. However, many circular business models focus on environmental or technological contributions to sustainability rather than considering all dimensions of sustainability simultaneously. Based on existing sustainable business model archetypes, a hierarchical business model typology is developed that allows a stepwise exploration of sustainable business model innovation opportunities incorporating an environmental, social and economic dimension. An analysis of business model components generates a closer look on the six newly defined Sustainable Circular Business Models. Finally, a conceptual application for organic waste valorization technologies, supported by examples from literature, allows a practical view on the implementation of the business models in the bio-economy. The typology offers a guide toward sustainable business model design or innovation opportunities centered around technologies creating value from waste.

Recent progress on production technologies of food waste-based biochar and its fabrication method as electrode materials in energy storage application

The abundance of food waste across the globe has called for the mitigation and reduction of these discarded wastes. Herein, the potential of biochar derived from food waste is unquestionable as it provides a sustainable way of utilizing the abundance of available biomass, as well as an effective way of preserving the ecosystem through the reduction of concerning environmental issues. This review focuses on the food waste-based biochar as advanced electrode materials in the energy storage devices. Efforts have been made to present and discuss the current exploration of the food waste utilization, along with the biochar production technologies through thermochemical conversion, including combustion, gasification, and pyrolysis method. Finding its limitation in literatures, discussion on the food waste-based biochar fabrication method as the electrode materials is elaborated, alongside the current food waste-based biochar that has been explored in the energy application thus far. Towards the end, the outlook and perspective on the further development of food waste-based biochar have been outlined.

Tobacco Plastid Transformation as Production Platform of Lytic Polysaccharide MonoOxygenase Auxiliary Enzymes

Plant biomass is the most abundant renewable resource in nature. In a circular economy perspective, the implementation of its bioconversion into fermentable sugars is of great relevance. Lytic Polysaccharide MonoOxygenases (LPMOs) are accessory enzymes able to break recalcitrant polysaccharides, boosting biomass conversion and subsequently reducing costs. Among them, auxiliary activity of family 9 (AA9) acts on cellulose in synergism with traditional cellulolytic enzymes. Here, we report for the first time, the production of the AA9 LPMOs from the mesophilic Trichoderma reesei (TrAA9B) and the thermophilic Thermoascus aurantiacus (TaAA9B) microorganisms in tobacco by plastid transformation with the aim to test this technology as cheap and sustainable manufacture platform. In order to optimize recombinant protein accumulation, two different N-terminal regulatory sequences were used: 5' untranslated region (5'-UTR) from T7g10 gene (DC41 and DC51 plants), and 5' translation control region (5'-TCR), containing the 5'-UTR and the first 14 amino acids (Downstream Box, DB) of the plastid atpB gene (DC40 and DC50 plants). Protein yields ranged between 0.5 and 5% of total soluble proteins (TSP). The phenotype was unaltered in all transplastomic plants, except for the DC50 line accumulating AA9 LPMO at the highest level, that showed retarded growth and a mild pale green phenotype. Oxidase activity was spectrophotometrically assayed and resulted higher for the recombinant proteins without the N-terminal fusion (DC41 and DC51), with a 3.9- and 3.4-fold increase compared to the fused proteins.

How Can Resource-Exhausted Cities Get Out of "The Valley of Death"? An Evaluation Index System and Obstacle Degree Analysis of Green Sustainable Development

Resource-based cities are suffering from resource scarcity and environmental deterioration. Spirit, vitality and prosperity are disappearing and cities have moved towards "the valley of death" in terms of urban development. This typically appears in environments where it is difficult to maintain sustainable development. Based on empirical analysis, a qualitative analysis method for the selection of evaluation indicators, as well as a quantitative analysis method for index weighting and principal component extraction for constructing a three-level evaluation index system of green development for coal-resource-exhausted cities, was adopted. This study also discussed the life cycle at different development stages of resource-based cities, including mature resource-based and growing resource-based cities. We further argued that the obstacle degree can act as an evaluation basis and make recommendations accordingly to improve the green development of cities. Through star-standard divisions and statistical analysis, it can be explicated that the increase in green development in the first stage is greater than that in the later stage, which is more obvious in cities with lower stars. The results also show the evolution trend and stability coefficient. There is no end in sight for urban green development, and this study can provide a new perspective to relieve the declining trend and promote green sustainable development.

Metagenomics analysis of the effects of Agaricus bisporus mycelia on microbial diversity and CAZymes in compost

Agaricus bisporus growth alters the lignocellulosic composition and structure of compost. However, it is difficult to differentiate the enzyme activities of A. bisporus mycelia from the wider microbial community owing to the complication of completely speareting the mycelia from compost cultures. Macrogenomics analysis was employed in this study to examine the fermentation substrate of A. bisporus before and after mycelial growth, and the molecular mechanism of substrate utilization by A. bisporus mycelia was elucidated from the perspective of microbial communities and CAZymes in the substrate. The results showed that the relative abundance of A. bisporus mycelia increased by 77.57-fold after mycelial colonization, the laccase content was significantly increased and the lignin content was significantly decreased. Analysis of the CAZymes showed that AA10 family was extremely differentiated. Laccase-producing strains associated with AA10 family were mostly bacteria belonging to Thermobifida and Thermostaphylospora, suggesting that these bacteria may play a synergistic role in lignin decomposition along with A. bisporus mycelia. These findings provide preliminary evidence for the molecular mechanism of compost utilization by A. bisporus mycelia and offer a reference for the development and utilization of strains related to lignocellulose degradation.

Plastid Transformation: New Challenges in the Circular Economy Era

In a circular economy era the transition towards renewable and sustainable materials is very urgent. The development of bio-based solutions, that can ensure technological circularity in many priority areas (e.g., agriculture, biotechnology, ecology, green industry, etc.), is very strategic. The agricultural and fishing industry wastes represent important feedstocks that require the development of sustainable and environmentally-friendly industrial processes to produce and recover biofuels, chemicals and bioactive molecules. In this context, the replacement, in industrial processes, of chemicals with enzyme-based catalysts assures great benefits to humans and the environment. In this review, we describe the potentiality of the plastid transformation technology as a sustainable and cheap platform for the production of recombinant industrial enzymes, summarize the current knowledge on the technology, and display examples of cellulolytic enzymes already produced. Further, we illustrate several types of bacterial auxiliary and chitinases/chitin deacetylases enzymes with high biotechnological value that could be manufactured by plastid transformation.

Waste management and green technology: future trends in circular economy leading towards environmental sustainability

The effective treatment of waste to be used as a resource in future has a major role in achieving environmental sustainability and moving towards circular economy. The current research is aimed to provide in-depth detail regarding prominent trends and research themes, evolution, future research orientation, main characteristics, and mapping of research publications on waste management, technological innovation in circular economy domain from the year 2000 to 2021. Different analyses including text mining and bibliometric and content analyses were applied to answer the research question and provide the details on aforementioned variables. From the bibliometric analyses, a total of 1118 articles were drawn out from the Scopus database to conceptualize the core body of research. As a result, the following themes were identified: electronic waste, circular economy transition, plastic waste, bio-based waste management, lifecycle assessment, and ecological impacts, and construction and demolition waste management. The highlighted features, future research orientation, and prominent research perspective can provide guideline for future research to enrich the literature through conducting studies on provided research directions and help lead waste management and technological innovation policymakers, professionals, and practitioners in moving towards circular transition.

Biochemical Insights into the Ability of Lemna minor L. Extract to Counteract Copper Toxicity in Maize

Metal trace elements (MTE) can damage crops if present in excessive amounts in the environment. This research investigated the effect of a plant extract of an aquatic species, Lemna minor L. (duckweed) (LE), on the ability of maize to cope with copper (Cu) toxicity. LE reversed the effects of Cu²⁺ on photosynthetic activity (Pn), evapotranspiration (E), stomatal conductance (gs), sub-stomatal CO₂ concentration (Ci) and biomass which did not differ from the untreated controls. LE did not regulate the amount of copper in maize leaves, but compared to Cu-treated samples, the extract decreased the hydrogen peroxide (H₂O₂; -26% on average) and malondialdehyde (MDA; -47% on average) content, regardless of the dosage applied. Furthermore, the activity of antioxidant enzymes superoxide dismutase (SOD), ascorbate peroxidase (APX) and catalase (CAT) was significantly increased by LE compared to samples treated with Cu alone. Untargeted metabolomic profiling revealed that LE activated maize secondary metabolism, eliciting the content of non-enzymatic antioxidants (flavonoids, glutathione and glutathione-related compounds, tocopherols and tocotrienols) and modulating plant stress-related hormones (brassinosteroids and ABA derivatives). The results of this study are promising and pave the way for using duckweed as a biostimulant to trigger beneficial effects in maize and increase its resistance to MTEs.

Understanding the environmental impacts of biogas utilization for energy production through life cycle assessment: An action towards reducing emissions

Unlike renewable energy sources, burning fossil fuels has severe environmental impacts, such as greenhouse gas (GHG) emissions and climate change. Therefore, this study was conducted to assess and compare the environmental impacts of three biogas utilization scenarios for energy production. The life cycle assessment (LCA) method was used to compare (i) biogas combustion in combined heat and power (CHP) unit, (ii) biogas burning in a steam boiler, and (iii) biogas upgrading using pressure swing adsorption (PSA) unit to determine the most sustainable option. The results revealed that the upgrading scenario was the best option, achieving emission savings in 8 out of 10 investigated impact categories. Among them, the emission saving was the highest in the marine aquatic ecotoxicity category (-4276.97 kg 1,4-DB eq./MJ). The CHP scenario was the second-best option, followed by the boiler scenario (worst option), and both had the most beneficial performance in the ozone depletion potential category with 6.29E-08 and 9.88E-08 kg CFC-11-eq./MJ, respectively. The environmental burdens of the boiler scenario were the highest in the marine aquatic ecotoxicity category (248.92 kg 1,4-DB eq./MJ). Although the CHP and boiler scenarios contributed to environmental burdens in all impact categories, they achieved beneficial performances compared to fossil fuel-based systems.

The potential of animal manure management pathways toward a circular economy: a bibliometric analysis

Improper disposal of animal waste is responsible for several environmental problems, causing eutrophication of lakes and rivers, nutrient overload in the soil, and the spread of pathogenic organisms. Despite the potential to cause adverse ecological damage, animal waste can be a valuable source of resources if incorporated into a circular concept. In this sense, new approaches focused on recovery and reuse as substitutes for traditional processes based on removing contaminants in animal manure have gained attention from the scientific community. Based on this, the present work reviewed the literature on the subject, performing a bibliometric and scientometric analysis of articles published in peer-reviewed journals between 1991 and 2021. Of the articles analyzed, the main issues addressed were nitrogen and phosphorus recovery, energy generation, high-value-added products, and water reuse. The energy use of livestock waste stands out since it is characterized as a consolidated solution, unlike other routes still being developed, presenting the economic barrier as the main limiting factor. Analyzing the trend of technological development through the S curve, it was possible to verify that the circular economy in the management of animal waste will enter the maturation phase as of 2036 and decline in 2056, which demonstrates opportunities for the sector's development, where animal waste can be an economic agent, promoting a cleaner and more viable product for a sustainable future.

Yeast community composition impacts on tequila industry waste treatment for pollution control and waste-to-product synthesis

The Tequila industry is a major producer of wastewater in the state of Jalisco, Mexico. Tequila vinasses (TV) are a residue from the distillation of fermented agave wort during tequila production. TV are difficult to treat due their high organic content, high nutrient loads, acidic pH and high discharge temperature. TV are frequently released into waterbodies or soil without any treatment, leading to environmental degradation of soil and water sources. To reduce the environmental impact of the tequila industry, cost-effective TV revalorization approaches must be developed. The goals of the present study were to assess the treatment and revalorization potential of TV using mono and mixed yeast cultures to produce single-cell protein (SCP) and to analyze yeast community composition using high-throughput sequencing during the mixed-culture fermentation of TV. The fermentation process was performed using a mixed culture of three fodder yeast species (Candida utilis, Rhodotorula mucilaginosa and Kluyveromyces marxianus) during 48 h at benchtop-scale. High-throughput sequencing was performed to assess the relative abundance of the yeast communities. Additionally, a redundancy analysis was performed to analyze the bidirectional influence between yeast communities and pollutant removal (COD, nitrogen, phosphorus, proteins, and sugars). Mixed yeast cultures displayed overall higher pollutant removal rates than monocultures, where C. utilis and K. marxianus contributed the most to pollutant removal and protein accumulation. The R. mucilaginosa population declined rapidly in mixed culture, presumably due to TV acidity and phenolic composition. However, the presence of The R. mucilaginosa in the mixed culture enhanced pollutant removal and amino acid contents. Accordingly, the protein and amino acid content within mixed cultures were significantly higher than those of monocultures, indicating that mixed cultures have a strong potential to produce protein rich biomass from TV, aiding in the transition of both the tequila and the livestock industries to a sustainable circular bioeconomy model by the reintegration of organic material flows into productive processes, reducing raw resource intake and waste generation. The present circular bioeconomy approach could represent a potential to produce 45,664 tons of protein feed yearly, based on the current tequila vinasses generated in the state of Jalisco.

Analysis and application evaluation of the flavour-precursor and volatile-aroma-component differences between waste tobacco stems

The development and utilization of waste resources have important scientific significance and social value. As a renewable and clean resource, the flavour components of waste tobacco stems (WTS) make a significant contribution to the development of waste resources. To evaluate the industrial applicability of the different WTS as raw materials, the present study systematically examined the differences in flavour precursors and volatile aroma components in tobacco stems (TS) from typical tobacco (Nicotiana tabacum L.) growing areas in Yunnan Province through HPLC and GC‒MS analysis. Meanwhile, the contribution to improving the quality of cigarette products is discussed accordingly. The results showed that the contents of flavour precursors, carotenoid and hexane degradation products, neophydiene and total volatile aroma substances in TS were the highest in the Dianxi area, Yun 87 variety and the upper part of Yunnan Province, while the contents of Maillard reaction products and phenylalanine degradation products were the highest in the Diandong area and middle part. The aroma components and sensory quality of TS have obvious regional characteristics in Yunnan. Accordingly, the higher flavour components improve cigarette quality. Most importantly, the middle and upper TS should be preferred to use and classified to process according to the tobacco growing areas, which is beneficial for promoting industrial applicability in cigarette preparation. This study provides a theoretical reference for the industrial value-added applicability of TS in the aspects of flavour extraction and cigarette preparation.

•

Differences in flavour precursors and aroma components in tobacco stems were systematically studied.

•

Flavour precursors and total volatile substances were the highest in the Dianxi area, Yun 87 variety and upper parts.

•

The aroma components and sensory quality of tobacco stems have obvious regional characteristics.

•

Higher flavour components in tobacco stems provide a better contribution to improving cigarette quality.

•

The use of middle and upper tobacco stems are preferred and classify to process to promote industrial applicability.

Rice Straw Utilisation for Bioenergy Production: A Brief Overview

Unsustainable rice straw management causes environmental impacts; hence, utilisation of rice straw for bioenergy is a promising strategy for sustainable rice straw management. Although rice straw has a high potential for bioenergy generation, the whole production cycle and application may cause environmental damage that is not fully understood. Hence, environmental performance studies are required to determine the most effective rice straw utilisation options. A comprehensive approach, such as life-cycle assessment (LCA), can give comprehensive information on the possible environmental effects of rice straw utilisation for bioenergy. Therefore, this study briefly overviews the LCA of rice straw utilisation for bioenergy production. It is found that utilisation of rice straw for bioenergy could reduce global warming potential compared to energy production from fossil fuels. However, it is suggested that other impact categories in LCA be evaluated in the bioenergy production from rice straw research to determine the overall sustainability of the production.