Insight: High intensity and activity carrier granular sludge cultured using polyvinyl alcohol/chitosan and polyvinyl alcohol/chitosan/iron gel beads

Anammox at low temperature: effectiveness, mechanisms and prospect of embedding immobilization to enhance AnAOB activity

Low temperature critically restricts the widespread application of anaerobic ammonium oxidation (anammox) in wastewater treatment by impairing microbial metabolic activity and nitrogen removal efficiency. To address this limitation, embedding immobilization technology (EIT) has emerged as a strategic approach to in-situ enhance the cryotolerance of anaerobic ammonium-oxidizing bacteria (AnAOB). Here, the efficacy of EIT in revitalizing AnAOB activity under low-temperature, with a focused analysis of its mechanisms, material innovations, and future research priorities are reviewed systematically evaluated. Mechanistic studies reveal that EIT establishes a protective microenvironment, mitigating temperature-induced physiological stress and significantly upregulating key enzymatic activities. Notably, at 10°C, EIT elevates hydrazine dehydrogenase (HDH) and hydrazine synthase (HZS) activities by 67% (0.16 μmol cytochrome-c/(min·mg protein)) and 85% (0.53 nmol/(min·mg protein)), respectively, thereby optimizing nitrogen metabolic flux, achieving stable ammonium removal efficiency (ARE) and nitrogen removal efficiency (NRE) of ~ 80% and ~ 90%, respectively, at 10-13°C. The effectiveness of EIT is intricately tied to the physicochemical and biological properties of encapsulation materials. Future advancements require targeted optimization of material stability, biocompatibility, and substrate permeability, alongside the integration of functional additives (e.g., conductive polymers, inorganic hybrids) to enhance electron transfer and long-term operational resilience. This review provides a theoretical and practical framework for the application of EIT technology in the low-temperature resistance of anammox.

Effective denitrification from landfill leachate using magnetic PVA/CMC/DE carrier immobilized microorganisms

Ammonia nitrogen (NH4+-N) discharge has caused eutrophication of water bodies and harm to humans and organisms. In this work, polyvinyl alcohol (PVA), sodium carboxymethyl cellulose (CMC), diatomite (DE), and Fe3O4 were used to prepare magnetic immobilized carriers by encapsulating microorganisms for the treatment of NH4+-N wastewater. The response surface methodology was used to explore the optimal ratio of the immobilized carriers. The obtained optimal raw material ratio was 99.10 %. The obtained carriers are spherical (4-5 mm in diameter) with a rich honeycombed pore structure. The magnetic carrier improves the ammonia oxidation activity, and the carrier achieved 99.0 % of NH4+-N and 86.7 % of total nitrogen (TN) removal rates from the simulated wastewater (NH4+-N concentration: 300 mg/L) through nitrification and denitrification under aerobic conditions. Upon applied for a 60 days' treatment of landfill leachate (NH4+-N concentration of 300 mg/L), the daily removal rates for NH4+-N and TN reached 93.7 % and 78.3 %, respectively. The analysis of the microbial community showed that the abundances of heterotrophic nitrifying-aerobic denitrifying bacteria including Enterobacter, Pseudomonas, and Bacillus increased with prolonging treatment days, which accelerated nitrification and denitrification, consequently promoting the nitrogen removal effect.

Partial nitrification-denitrification and enrichment of paracoccus induced by iron-chitosan beads addition in an intermittently-aerated activated sludge system

Insufficient carbon source has become the main limiting factor for efficient nitrogen removal in wastewater treatment. In this study, an intermittently-aerated activated sludge system with iron-chitosan (Fe-CS) beads addition was proposed for nitrogen removal from low C/N wastewater. By adding Fe-CS beads, partial nitrification-denitrification (PND) process and significant enrichment of Paracoccus (with ability of iron reduction/ammonium oxidation/aerobic denitrification) were observed in the reactor. The accumulation rate of NO2--N reached 81.9 %, and the total nitrogen removal efficiency was improved to 93.9 % by shortening the aeration time. The higher activity of ammonium oxidizing bacteria and inhibited activity of nitrite-oxidizing bacteria in Fe-CS assisted system mediated the occurrence of PND. In contrast, the traditional nitrification and denitrification process occurred in the control group. The high-throughput sequencing analysis and metagenomic results confirmed that the addition of Fe-CS induced 77.8 % and 54.9 % enrichment of Paracoccus in sludge and Fe-CS beads, respectively, while almost no enrichment was observed in control group. Furthermore, with the addition of Fe-CS beads, the expression of genes related to outer membrane porin, cytochrome c, and TCA was strengthened, thereby enhancing the electron transport of Fe(Ⅱ) (electron donor) and Fe(Ⅲ) (electron acceptor) with pollutants in the periplasm. This study provides new insights into the direct enrichment of iron-reducing bacteria and its PND performance induced by the Fe-CS bead addition. It therefore offers an appealing strategy for low C/N wastewater treatment.

Functions and mechanisms of sponge iron-mediated multiple metabolic processes in anaerobic ammonium oxidation

Sponge iron (SI) is a promising material for nitrogen removal from wastewater. This study reveals the potential functions and mechanisms of SI-mediated multiple metabolic processes in the nitrogen removal of Anammox. The results showed that although the SI application prolonged the start-up time of the reactor, achieved efficient and stable nitrogen removal after a successful start-up. The total nitrogen removal efficiency of the SI-Anammox system (92.62%) was 13.30% higher than that of R0 without SI (79.32%). The increase in nitrogen removal performance was accompanied by an increase in SAA and EPS content. Further microbial analysis showed significant enrichment of functional microorganisms, such as Candidatus_Brocadia, Nitrosomonas, Ellin6067, and Nitrospira. Multi-omics evidence suggests that efficient nitrogen removal is ultimately attributable to the enhancement of the specific key Fe- and N-functional genes in Anammox.

Hydrogel bioreactor drives Feammox and synergistically removes composite pollutants: Performance optimization, microbial communities and functional genetic differences

Mixed pollutant wastewater has been a difficult problem due to the high toxicity of water bodies and the difficulty of treatment. Rice husk biochar modified with nano-iron tetroxide (RBC-nFe3O4) by polyvinyl alcohol cross-linking internal doping was used to introduce iron-reducing bacteria Klebsiella sp. FC61 to construct a bioreactor. The results of the long-term operation of the bioreactor showed that the removal efficiency of ammonia nitrogen (NH4+-N) and chemical oxygen demand best reached 90.18 and 98.49%, respectively. In addition, in the co-presence of Ni2+, Cd2+, and ciprofloxacin, the bioreactor was still able to remove pollutants efficiently by RBC-nFe3O4 and bio-iron precipitation inside the biocarrier. During the long-term operation, Klebsiella was always the dominant species in the bioreactor. And the sequencing data for functional prediction showed that the biocarrier contained a variety of enzymes and proteins involved in Feammox-related activities to ensure the stable and efficient operation of the bioreactor.

Poly(vinyl alcohol)/modified porous starch gel beads for microbial preservation and reactivation: preparation, characterization and its wastewater treatment performance

Poly(vinyl alcohol) (PVA)/modified porous starch (MPS) gel beads were prepared through in situ chemical cross-linking by incorporating with MPS, which was obtained by modifying porous starch (PS) with polyethyleneimine (PEI) and glutaraldehyde (GA). Addition of MPS could improve the storage modulus and the effective crosslinking density (ve) of the gel beads, and the mechanical properties were enhanced. The PVA-MPS gel beads were preserved as immobilized microbial carriers for 40 d and reactivated in wastewater. Scanning electron microscope (SEM) observations showed that the beads were highly porous and conducive for microorganism adhesion. The PVA-MPS gel beads were able to remove 97% of ammonia nitrogen and 80% of chemical oxygen demand (COD) after reactivation under all four preservation conditions. The abundance of Hydrogenophaga as denitrifying bacteria on PVA-MPS gel beads increased, with abundance of 8.44%, 5.55%, 8.90% and 9.48%, respectively. It proved that the carrier provided a partial hypoxic environment for microorganisms.

Efficient antibacterial and dye adsorption by novel fish scale silver biochar composite gel

A silver-loaded carbon-chitosan-polyvinyl alcohol gel (C/CTS/PVA) was designed for suppressing microbial growth and dye adsorption. The antibacterial test results showed that C/CTS/PVA gel had a good antibacterial ability against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. The inhibition rate in water was 100 %, and the antibacterial rate remained above 95 % within 35 days after preparation. The tight spatial structure provided by the adhesive effect of PVA and CTS effectively prevented water loss and enhanced the stability of the gel. The adsorption curves of the gel were fitted by establishing the pseudo-first order and pseudo-second order kinetic models. The adsorption curves were more consistent with the pseudo-second-order kinetic model. The best adsorption effect for Malachite green was 128.12 mg/g. C/CTS/PVA gel had a remarkable adsorption effect on Malachite green, Congo red, Methyl orange, and Methylene blue. In general, C/CTS/PVA gels have great potential for the treatment of sewage in the future.

Formation mechanisms and assembly patterns of anammox biofilm induced by carrier type: Novel insights based on low-strength wastewater treatment

The morphological structure, properties, microbial community and function of anammox biofilms induced by large-pore carriers (Bls), small-pore carriers, filament carriers and non-carriers (Bn) in low-strength wastewater were comprehensively studied. The carriers promoted biomass accumulation and agglomeration, with Bls demonstrating the highest biomass proportion of 0.76, the highest specific anammox activity (0.41 kgN/(kgVSS·d)^-1) and the largest aggregates. Hydraulic shearing stimulated Bn to secrete most extracellular polymeric substances and capture more inorganic ions for enhanced strength. Metagenomic sequencing showed that the four biofilms shared a common core flora, but differed in cross-metabolism. The proportion of the functional bacterium Candidatus Brocadia was highest in Bls, while the increase in heterotrophic bacteria in Bn supported stronger metabolic capacity. Finally, the proposed anisotropic or isotropic carrier structure was identified as the key to generating "uniform development" and "central development" models. This study is helpful for understanding the anammox aggregation mechanism and carrier optimization.

Chitosan-based nanocomposites for removal of Cr(VI) and synthetic food colorants from wastewater

Current study aims to synthesize chitosan/polyvinyl alcohol (CS/PVA), poly(ethyleneimine), and Fe₃O₄ impregnated beads for co-removal of Cr(VI) and toxic azo-dyes from wastewater. The mesoporous PEI@AC@Fe₃O₄ exhibits magnetism and enhanced physisorption by higher specific-porosity (2.1 nm) from Cr(VI) radii (0.044 nm). Moreover, surface functional groups (-OH, -NH, -NH₂, -COOH etc.), especially amines enhance ionic bonding due to positive zeta potential. Hence, it is unique for anionic dyes removal under a wide pH range. It showed maximum adsorption capacity 98, 85.5, 85.8, and 91%, or 199.8, 148, 167, 176.5 mg g^-1 respectively for Cr(VI), tartrazine, sunset yellow, and erythrosine. Surface adsorption of Cr(VI) and its transition into Cr(III) was confirmed by EDX. Langmuir isotherm and pseudo-first-order kinetics best fit the adsorption of Cr(VI) and azo-dyes confirming their monolayer physisorption on adsorbent surface. Synthesized adsorbent examined in wastewater purification prototype for efficient removal of different simulated wastewaters confirms its potential for real-world applications.

Partition of Anammox and Nitrifiers Through Bio-Carriers for Full-Scale Sidestream Partial Nitrification-Anammox Plant

This study assessed the activity and community structure in different types of sludge to reveal the partition mechanism of anammox and nitrifiers in a full-scale partial nitrification-anammox plant. Batch experiments confirmed that suspended sludge had higher partial nitrification capacity, and biofilm sludge had higher anammox activity, 16.9 times higher than suspended sludge. qPCR analysis confirmed that the amoA gene was mainly present in suspended sludge, and the highest abundance of the Amx gene was observed in biofilm sludge, reaching 1.01 × 107 copies/ng DNA. High-throughput results revealed that Nitrosomonas was the main ammonia-oxidizing bacteria with high activity in suspended sludge, and Candidatus Brocadia had the highest abundance of 13.4% in biofilm sludge. This is the exploration of the microbial community of three different sludge types in the full-scale sidestream PN/A system for the first time, which can guide the construction and replication of full-scale PN/A plants.

Enhanced treatment of organic matters in starch wastewater through Bacillus subtilis strain with polyethylene glycol-modified polyvinyl alcohol/sodium alginate hydrogel microspheres

Starch wastewater is a wide range of environmental issues with organic pollutants. A high efficiency and stability hydrogel-organic degradation system was designed via Bacillus Subtilis with Polyethylene glycol (PEG)-modified Polyvinyl alcohol (PVA)/Sodium alginate (SA) hydrogel microspheres. Bacillus subtilis was immobilized on the surface or inside of PEG-modified PVA/SA hydrogels microspheres via physical adsorption. Results showed PEG-modified PVA/SA microspheres had an effect of adsorption on Bacillus subtilis with enhancing bearing rate to 54.22% compared to the blank control group. The effect of microspheres on degradation was remarkable in simulation starch wastewater with a maximum COD removal rate of 93.35% and compared in reality starch wastewater with 90.02% under the optimal condition of pH = 6, 35℃, 20% dosage, 180 rpm. This novel biological method on starch wastewater enhanced tolerance of microorganisms and degradation effect, reflecting safety, effectiveness, and economy with great significance to environmental protection.

Unravelling capability of two-stage thermophilic anaerobic membrane bioreactors for high organic loading wastewater: Effect of support media addition and irreversible fouling

This study investigated the effects of adding polyvinyl alcohol (PVA) beads on the performance of methanogenic reactors and the fouling behavior of a two-stage thermophilic anaerobic membrane bioreactor (ThAnMBR) for treating wastewater at a feed chemical oxygen demand (COD) of 10 g/L. The PVA-added methanogenic reactor exhibited stable operation performance and offered a relatively low volatile fatty acid concentration effluent with a higher COD removal than the system without PVA addition. The predominant microbial communities in both methanogenic reactors were similar and were assigned to the genus Methanosaeta, followed by Clostridia, which was the predominant genus in the hydrolytic reactor. Ultrafiltration in the PVA-added system offered higher effluent quality and lower fouling resistance. The system was able to operate with hydraulically removable fouling, without any chemical cleaning requirements; however, an elevated flux caused the system to suffer from hydraulically irreversible fouling. PVA beads exhibit their structural stability over long-term operation.

Insight into enrichment of anammox bacteria by a polyurethane sponge carrier coupled with iron-carbon micro-electrolysis under no strict anaerobic condition

A novel composite carrier (ICME-PS) was formed by coupling polyurethane sponge carriers (PS) with different pore sizes (15, 25, 40 ppi) and iron-carbon micro-electrolysis (ICME), which was used for enrichment of anammox bacteria and stable operation under no strict anaerobic condition. An increase of 5.67%-38.55% in specific anammox activity (SAA), an significant enhancement of biofilm stability and an improvement of 14.61%-42.38% in Ca.Brocadia were observed in ICME-PS, compared to PS carriers. ICME played a dual role: 1) contributed to the formation of an anaerobic microenvironment; 2) used for nitrogen cycle reactions. Additionally, small-pore carriers with highest biofilm stability can be used in high shear environments, while medium-pore carriers achieved the highest SAA in stable environments. Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) analysis indicated that ICME application reduced the energy barrier and improved aggregation performance. This study designed a novel composite carrier to broaden the application of anammox under no strict anaerobic condition.

Enhanced treatment of organic matter in slaughter wastewater through live Bacillus velezensis strain using nano zinc oxide microsphere

Slaughter wastewater is an important and wide range of environmental issues, and even threaten human health through meat production. A high efficiency and stability microsphere-immobilized Bacillus velezensis strain was designed to remove organic matter and inhibit the growth of harmful bacteria in process of slaughter wastewater. Bacillus velezensis was immobilized on the surface of sodium alginate (SA)/Polyvinyl alcohol (PVA)/Nano Zinc Oxide (Nano-ZnO) microsphere with the adhesion to bio-carrier through direct physical adsorption. Results indicated that SA/PVA/ZnO and SA/ZnO microspheres could inhibit E.coli growth with adding 0.15 g/L nano-ZnO and not affect Bacillus velezensis strain, and the removal the chemical oxygen demand (COD) rates of SA/PVA/ZnO microsphere immobilized cells are 16.99%, followed by SA/ZnO (13.69%) and free bacteria (7.61%) from 50% concentration slaughter wastewater within 24 h at 37 °C, pH 7.0, and 120 rpm, a significant difference was found between the microsphere and control group. Moreover, when the processing time reaches 36 h, COD degradation of SA/PVA/ZnO microsphere is obviously higher than other groups (SA/PVA/ZnO:SA/ZnO:control vs 18.535 : 15.446: 10.812). Similar results were obtained from 30% concentration slaughter wastewater. Moreover, protein degradation assay was detected, and there are no significant difference (SA/PVA/ZnO:SA/ZnO:control vs 35.4 : 34.4: 36.0). The design of this strategy could greatly enhance the degradation efficiency, inhibit the growth of other bacteria and no effect on the activity of protease in slaughter wastewater. These findings suggested that the nano-ZnO hydrogel immobilization Bacillus velezensis system wastewater treatment is a valuable alternative method for the remediation of pollutants from slaughter wastewater with a novel and eco-friendly with low-cost investment as an advantage.

Crown Ether Grafted Graphene Oxide/Chitosan/Polyvinyl Alcohol Nanofiber Membrane for Highly Selective Adsorption and Separation of Lithium Ion

Nanofiber membranes were successfully prepared with crown ether (CE) functionalized graphene oxide (GO), chitosan (CS), and polyvinyl alcohol (PVA) by low-temperature thermally induced liquid-liquid phase separation. The physical and chemical properties and adsorption performance of nanofiber membrane were studied through SEM, FT-IR, XRD, and static adsorption experiments. The results show that the specific surface area of the nanofiber membrane is as high as 101.5 m2∙g-1. The results of static adsorption experiments show that the maximum adsorption capacity of the nanofiber membrane can reach 168.50 mg∙g-1 when the pH is 7.0. In the selective adsorption experiment, the nanofiber membrane showed high selectivity for Li+ in salt lake brine. After five cycles, the material still retains 88.31% of the adsorption capacity. Therefore, it is proved that the material has good regeneration ability.