Role of residue cornstalk derived biochar for the enhanced bio-hydrogen production via simultaneous saccharification and fermentation of cornstalk

Biochar applications in microbial fermentation processes for producing non-methane products: Current status and future prospects

The objective of this review is to encourage the technical development of biochar-assisted microbial fermentation. To this end, recent advances in biochar applications for microbial fermentation processes (i.e., non-methane products of hydrogen, acids, alcohols, and biofertilizer) have been critically reviewed, including process performance, enhanced mechanisms, and current research gaps. Key findings of enhanced mechanisms by biochar applications in biochemical conversion platforms are summarized, including supportive microbial habitats due to the immobilization effect, pH buffering due to alkalinity, nutrition supply due to being rich in nutrient elements, promoting electron transfer by acting as electron carriers, and detoxification of inhibitors due to high adsorption capacity. The current technical limitations and biochar's industrial applications in microbial fermentation processes are also discussed. Finally, suggestions like exploring functionalized biochar materials, biochar's automatic addition and pilot-scale demonstration are proposed. This review would further promote biochar applications in microbial fermentation processes for the production of non-methane products.

Enhancement on photobiological hydrogen production from corn stalk via reducing hydrogen pressure in bioreactors by way of phased decompression schemes

In this project, it was verified that properly reducing the bioreactor hydrogen partial pressure (HPP) could significantly enhance the photo-fermentative hydrogen production (PFHP) by corn stalk. The maximal cumulative hydrogen yield (CHY) of 82.37 mL/g was obtained under full decompression to 0.4 bar, which was 35% higher than that without decompression. To increase CHY and save the pressure control cost, 12-hour, 24-hour and 36-hour decompression schemes were provided, and the optimal decompression phase in fermentation under each scheme was investigated. The 12-hour decompression scheme was suitable for 24-36 h of fermentation; the 24-hour decompression scheme implemented within 12-36 h of fermentation had a more desirable CHY; when adopting the 36-hour decompression scheme, operation during 12-48 h yielded a CHY of 81.70 mL/g that approximated whole process decompression. The strategies of decompression at the appropriate phase of fermentation were innovative, which offered a new option for optimizing PFHP economically.

A Recent Review of Primary Hydrogen Carriers, Hydrogen Production Methods, and Applications

Hydrogen is a promising energy carrier, especially for transportation, owing to its unique physical and chemical properties. Moreover, the combustion of hydrogen gas generates only pure water; thus, its wide utilization can positively affect human society to achieve global net zero CO2 emissions by 2050. This review summarizes the characteristics of the primary hydrogen carriers, such as water, methane, methanol, ammonia, and formic acid, and their corresponding hydrogen production methods. Additionally, state-of-the-art studies and hydrogen energy applications in recent years are also included in this review. In addition, in the conclusion section, we summarize the advantages and disadvantages of hydrogen carriers and hydrogen production techniques and suggest the challenging tasks for future research.

Genomic and Transcriptional Characteristics of Strain Rum-meliibacillus sp. TYF-LIM-RU47 with an Aptitude of Directly Producing Acetoin from Lignocellulose

Rummeliibacillus sp. TYF-LIM-RU47, isolated from the fermentation substrate of grain vinegar, could produce acetoin using a variety of carbon sources, including pentose, hexose and lignocellulose. The draft genome of TYF-LIM-RU47 was constructed and the genomic information revealed that TYF-LIM-RU47 contains genes related to starch and sucrose metabolism, pyruvate metabolism, the oxidative phosphorylation metabolic pathway and lignocellulosic metabolism. The acetoin anabolic pathway of TYF-LIM-RU47 has been deduced from the sequencing results, and acetoin is produced from α-acetolactate via decarboxylation and diacetyl reductase catalytic steps. The results of quantitative real-time PCR tests showed that the synthesis and degradation of acetoin had a dynamic balance in acetoin metabolism, and the transcription of the α-acetolactate synthase gene might exist to the extent of feedback regulation. This study can help researchers to better understand the bioinformation of thermophilic-lignocellulosic bacteria and the mechanisms of the acetoin biosynthesis pathway.

Consolidated microbial production of four-, five-, and six-carbon organic acids from crop residues: Current status and perspectives

The production of platform organic acids has been heavily dependent on petroleum-based industries. However, petrochemical-based industries that cannot guarantee a virtuous cycle of carbons released during various processes are now facing obsolescence because of the depletion of finite fossil fuel reserves and associated environmental pollutions. Thus, the transition into a circular economy in terms of the carbon footprint has been evaluated with the development of efficient microbial cell factories using renewable feedstocks. Herein, the recent progress on bio-based production of organic acids with four-, five-, and six-carbon backbones, including butyric acid and 3-hydroxybutyric acid (C4), 5-aminolevulinic acid and citramalic acid (C5), and hexanoic acid (C6), is discussed. Then, the current research on the production of C4-C6 organic acids is illustrated to suggest future directions for developing crop-residue based consolidated bioprocessing of C4-C6 organic acids using host strains with tailor-made capabilities.

Engineered mesoporous biochar derived from rice husk for efficient removal of malachite green from wastewaters

Extremely soluble Malachite green (MG) acts as potential carcinogen for aquatic life in polluted aqueous environments. Current study aims to modify rice husk derived biochar to improve its removal efficiency for MG from MG-containing wastewaters. The hydrothermal alkali activation was effective for preparing modified biochar (RHMB) from native biochar (RHB) derived from rice husk. After modification, surface area and pore volume of RHMB was determined respectively 434.62 m²g^-1 and 287.28 cm³g^-1, significantly improved from native RHB values 21.764 m²g^-1 and 65.53 cm³g^-1. Pseudo second order kinetic model fitted well. RHMB exhibits an equilibrium adsorption capacity of 373.02 mg g^-1. RHMB showed an excellent MG removal ability and was not susceptible to ion interference even at highly saline environments. It has exhibited 96.96 ± 1.17% removal efficiency of MG and is expected to be used as potential adsorbent for MG remediation from aquaculture wastewater and other MG containing industrial wastewaters.

Sustainable additives for the regulation of NH3 concentration and emissions during the production of biomethane and biohydrogen: A review

This study reviews the recent advances and innovations in the application of additives to improve biomethane and biohydrogen production. Biochar, nanostructured materials, novel biopolymers, zeolites, and clays are described in terms of chemical composition, properties and impact on anaerobic digestion, dark fermentation, and photofermentation. These additives can have both a simple physical effect of microbial adhesion and growth, and a more complex biochemical impact on the regulation of key parameters for CH₄ and H₂ production: in this study, these effects in different experimental conditions are reviewed and described. The considered parameters include pH, volatile fatty acids (VFA), C:N ratio, and NH₃; additionally, the global impact on the total production yield of biogas and bioH₂ is reviewed. A special focus is given to NH₃, due to its strong inhibition effect towards methanogens, and its contribution to digestate quality, leaching, and emissions into the atmosphere.

Comparative life cycle assessment of biochar-based lignocellulosic biohydrogen production: Sustainability analysis and strategy optimization

Lignocellulose has been considered a potential feedstock for biohydrogen production. Recently, a novel closed-loop concept of biochar approach was developed for enhanced lignocellulosic biohydrogen production. This study therefore targets to analyze the environmental impacts of the three existing lignocellulosic biohydrogen production processes, and evaluate the environmental performance of applying biochar in each process at this early stage of technological development. The results suggest that biochar dosing shows better environmental performance for all impact categories, especially in the consolidate bioprocessing case. Electricity consumption was found to be the dominant cause of environmental impact over the life cycle, while by-products generation was also found to have an effect on the life-cycle impacts. Future research focuses on the biohydrogen production scale, the electricity generation scheme transition towards renewable and cleaner energetic systems, and recovery the by-products to the maximum extent, that will make lignocellulosic biohydrogen production more environmentally sustainable.

Advances in pretreatment of lignocellulosic biomass for bioenergy production: Challenges and perspectives

As a clean and renewable energy, bioenergy is one of the most promising alternatives to fossil fuels. Lignocellulose possesses great potential for bioenergy production, but the recalcitrant and heterogeneous structure limits its application. Pretreatment technology offers an effective solution to fractionate the main components of the lignocellulose and uncover the available cellulose. The obtained feedstock can be applied to bioconversion into energy, e.g., bioethanol, biogas, biohydrogen, etc. Here, the current state of lignocellulose pretreatment technologies was comprehensively reviewed, the advances in bioenergy production from pretreated lignocellulose was described, with particular attention to key challenges involved. Several new strategies for overcoming pretreatment barriers to realize highly efficient lignocellulose bioconversion were highlighted. The insights given in this review will facilitate further development on lignocellulosic bioenergy production, towards addressing the global energy crisis and climate change related to the use of fossil fuels.

Tolerance of photo-fermentative biohydrogen production system amended with biochar and nanoscale zero-valent iron to acidic environment

Anaerobic fermentation system is easy to become acidic due to the generation of small molecular acids, which will affect the metabolism of bacteria. Therefore, it is necessary to improve the acid resistance of system. In this work, the tolerance of photo-fermentative biohydrogen production system amended with biochar, nanoscale zero-valent iron (nZVI) and biochar + nZVI to acidic environment was studied. Results showed that additives improved the stability and performance of the photo fermentation. The best increment of biohydrogen from 0 to 286.83 ± 2.77 mL was obtained by adding biochar and nZVI together at the original pH of 4.5. The additive reduced the oxidation-reduction potential and promoted the consumption of acetate and butyrate. At initial pH of 5, 6 and 7, the highest biohydrogen yield of 361.02 ± 10.11, 419.36 ± 10.70 and 382.67 ± 25.08 mL was obtained by adding nZVI, respectively, representing 42%-44.45% increase compared with the control group under the same conditions.