Detection of the cyanobacterial toxin, microcystin-LR, using a novel recombinant antibody-based optical-planar waveguide platform

An assessment of a biosensor system for the quantification of microcystins in freshwater cyanobacterial blooms

Microcystin-producing cyanobacterial blooms are a global issue threatening drinking water supplies and recreation on lakes and beaches. Direct measurement of microcystins is the only way to ensure waters have concentrations below guideline concentrations; however, analyzing water for microcystins takes several hours to days to obtain data. We tested LightDeck Diagnostics' bead beater cell lysis and two versions of the quantification system designed to give microcystin concentrations within 20 min and compared it to the standard freeze-thaw cycle lysis method and ELISA quantification. The bead beater lyser was only 30 % effective at extracting microcystins compared to freeze-thaw. When considering freeze-thaw samples analyzed in 2021, there was good agreement between ELISA and LightDeck version 2 (n = 152; R2 = 0.868), but the LightDeck slightly underestimated microcystins (slope of 0.862). However, we found poor relationships between LightDeck version 2 and ELISA in 2022 (n = 49, slopes 0.60 to 1.6; R2 < 0.6) and LightDeck version 1 (slope = 1.77 but also a high number of less than quantifiable concentrations). After the quantification issues are resolved, combining the LightDeck system with an already-proven rapid lysis method (such as microwaving) will allow beach managers and water treatment operators to make quicker, well-informed decisions.

Electrochemical biosensor using SnO2 colloidal quantum wire for monitoring the interaction of microcystin antigen-antibody

Electrochemical sensors that incorporate immunoassay principles have the ability to monitor dynamic processes of antigen-antibody interactions in real time. In this study, a gold electrode was modified with tin dioxide colloidal quantum wire (SnO2 QWs) and then coated with the leucine/arginine subtype microcystin (MC-LR) antibody. The active site of SnO2 QWs that was not bound by MC-LR antibody was then passivated with bovine serum protein (BSA). When the MC-LR antigen binds specifically to the antibodies on the electrode's surface, it triggers electrochemical reactions and generates electrical signals at specific voltage conditions. The SnO2 QW exhibits excellent electron transport ability, and its ability to form a loose and porous microstructure on the gold electrode surface, which is conducive to the receptor function of the biosensor. The results show a high affinity between the MC-LR antigen and antibody, ranging from 1 pg/mL to 10 ng/mL of MC-LR antigen concentration. The kinetic characteristics of the immune reaction between MC-LR antigen and antibody were elucidated, obtaining a binding constant of 1.399 × 1011 M-1 and a dissociation constant of 7.147 pM, demonstrating the potential of electrochemical biosensing technology in biomolecular interactions.

Reaction mechanism and detecting properties of a novel molecularly imprinted electrochemical sensor for microcystin based on three-dimensional AuNPs@MWCNTs/GQDs

Microcystins with leucine arginine (MC-LR) is a virulent hepatotoxin, which is commonly present in polluted water with its demethylated derivatives [Dha7] MC-LR. This study reported a low-cost molecularly imprinted polymer network-based electrochemical sensor for detecting MC-LR. The sensor was based on a three-dimensional conductive network composed of multi-walled carbon nanotubes (MWCNTs), graphene quantum dots (GQDs), and gold nanoparticles (AuNPs). The molecularly imprinted polymer was engineered by quantum chemical computation utilizing p-aminothiophenol (p-ATP) and methacrylic acid (MAA) as dual functional monomers and L-arginine as a segment template. The electrochemical reaction mechanism of MC-LR on the sensor was studied for the first time, which is an irreversible electrochemical oxidation reaction involving an electron and two protons, and is controlled by a mixed adsorption-diffusion mechanism. The sensor exhibited a great detection response to MC-LR in the linear range of 0.08-2 μg/L, and the limit of detection (LOD) is 0.0027 μg/L (S/N = 3). In addition, the recoveries of the total amount of MC-LR and [Dha7] MC-LR in the actual sample by the obtained sensor were in the range from 91.4 to 116.7%, which indicated its great potential for environmental detection.

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Epitopes prediction for microcystin-LR by molecular docking

Microcystin-LR (MC-LR) is one of the most worldwide harmful cyanobacterial toxins. A lots of antibodies against MC-LR have been generated and characterized. However, the knowledge about the epitopes of MC-LR was still limited. The objective of this study was to analyze the epitopes of MC-LR and demonstrate the binding mode of MC-LR with its antibody. The variable genes of a mouse hybridoma cell line (Mab5H1-3B3) raised against MC-LR have been cloned and assembled in a single chain variable fragment (scFv), and then soluble expressed in E.coli BL21. Based on the scFv, the IC₅₀ and IC₁₀ for MC-LR were determined to be 7.45 nM and 0.30 nM by competitive ELISA. And the scFv also showed 115% and 112% cross-reactivities to MC-RR and MC-YR, and 59% to MC-LA. By molecular docking, the binding mode between MC-LR and its scFv was demonstrated. A hydrogen bond interaction was observed between the carbonyl group of Adda⁵ residue of MC-LR and its scFv, and the guanidyl group of Arg⁴ residue and phenyl group of Adda⁵ residue of MC-LR were also involved in the interaction. These predicted epitopes were supported by antibody cross-reactivity data. By comparing the antibody informatics of MC-LR scFv with its predicted paratopes, VH-CDR1 was crucial for MC-LR binding, and its specificity could be tuned by engineering in Vκ-CDR1 and Vκ-CDR3. These information would be useful for the hapten design for microcystins or improving the properties of MC-LR scFv in vitro.

Microcystin-LR heterologous genetically engineered antibody recombinant and its binding activity improvement and application in immunoassay

Microcystin-LR (MC-LR) is a high-toxic biohazard that pollutes ecological environment and agroproducts. In this study, a newly recombined genetically engineered antibody (AV_HH-MV_H) with higher thermal stability and binding activity was designed by chain shuffling and based on our previously obtained anti-MC-LR scFv and nanobody. Based on AV_HH-MV_H template, a capacity of 8.99 × 10⁵ CFU/mL of phage display AV_HH-MV_H mutagenesis library was constructed by site-directed mutagenesis in MV_H-CDR3 region, and then used for ultrasensitive mutants screening. Afterwards, a total of five positive AV_HH-MV_H mutants were isolated from the mutagenesis library, and their binding activity was higher than AV_HH-MV_H for MC-LR. The AV_HH-MV_H mutant 3 was cloned into pET-25b vector for soluble expression, and the concentration of target protein expressed in culture system was 43.5 mg/L. An indirect competitive enzyme-linked immunosorbent assay (IC-ELISA) was established based on purified AV_HH-MV_H mutant 3 protein, and it showed ultrasensitive binding activity for MC-LR with the detection limit of 0.0075 μg/L, which was far below the maximum residue limit standard of 1.0 μg/L in drinking water proposed by World Health Organization. The established IC-ELISA shows good accuracy, repeatability, stability and applicability for MC-LR spiked samples, and it is promising for MC-LR ultrasensitive monitoring.

An Optical Planar Waveguide-Based Immunosensors for Determination of Fusarium Mycotoxin Zearalenone

A planar waveguide (PW) immunosensor working as a polarisation interferometer was developed for the detection of mycotoxin zearalenone (ZON). The main element of the sensor is an optical waveguide consisting of a thin silicon nitride layer between two thicker silicon dioxide layers. A combination of a narrow waveguiding core made by photolithography with an advanced optical set-up providing a coupling of circular polarised light into the PW via its slanted edge allowed the realization of a novel sensing principle by detection of the phase shift between the p- and s-components of polarised light propagating through the PW. As the p-component is sensitive to refractive index changes at the waveguide interface, molecular events between the sensor surface and the contacting sample solution can be detected. To detect ZON concentrations in the sample solution, ZON-specific antibodies were immobilised on the waveguide via an electrostatically deposited polyelectrolyte layer, and protein A was adsorbed on it. Refractive index changes on the surface due to the binding of ZON molecules to the anchored antibodies were detected in a concentration-dependent manner up to 1000 ng/mL of ZON, allowing a limit of detection of 0.01 ng/mL. Structurally unrelated mycotoxins such as aflatoxin B1 or ochratoxin A did not exert observable cross-reactivity.

Recent developments in the methods of quantitative analysis of microcystins

Cyanotoxins are produced by the toxic cyanobacterial species present in algal blooms formed in water bodies due to nutrient over-enrichment by human influences and natural environmental conditions. Extensive studies are available on the most widely encountered cyanotoxins, microcystins (MCs) in fresh and brackish water bodies. MC contaminated water poses severe risks to human health, environmental sustainability, and aquatic life. Therefore, commonly occurring MCs should be monitored. Occasionally, detection and quantification of these toxins are difficult due to the unavailability of pure standards. Enzymatic, immunological assays, and analytical techniques like protein phosphatase inhibition assay, enzyme-linked immunosorbent assay, high-performance liquid chromatography, liquid chromatography-mass spectrometry, and biosensors are used for their detection and quantification. There is no single method for the detection of all the different types of MCs; therefore, various techniques are often combined to yield reliable results. Biosensor development offered a problem-solving approach in the detection of MCs due to their high accuracy, sensitivity, rapid response, and portability. In this review, an endeavor has been made to uncover emerging techniques used for the detection and quantification of the MCs.

Flexible on-demand cell-free protein synthesis platform based on a tube-in-tube reactor

A flexible on-demand cell-free protein synthesis platform using a tube-in-tube reactor is established for continuous synthesis of different protein drugs.

Understanding microcystin-LR antibody binding interactions using in silico docking and in vitro mutagenesis

Microcystins (MCs) are a group of highly potent cyanotoxins that are becoming more widely distributed due to increased global temperatures and climate change. Microcystin-leucine-arginine (MC-LR) is the most potent and most common variant, with a guideline limit of 1 μg/l in drinking water. We previously developed a novel avian single-chain fragment variable (scFv), designated 2G1, for use in an optical-planar waveguide detection system for microcystin determination. This current work investigates interactions between 2G1 and MC-LR at the molecular level through modelling with an avian antibody template and molecular docking by AutoDock Vina to identify key amino acid (AA) residues involved. These potential AA interactions were investigated in vitro by targeted mutagenesis, specifically, by alanine scanning mutations. Glutamic acid (E) was found to play a critical role in the 2G1-MC-LR binding interaction, with the heavy chain glutamic acid (E) 102 (H-E102) forming direct bonds with the arginine (R) residue of MC-LR. In addition, alanine mutation of light chain residue aspartic acid 57 (L-D57) led to an improvement in antigen-binding observed using enzyme-linked immunosorbent assay (ELISA), and was confirmed by surface plasmon resonance (SPR). This work will contribute to improving the binding of recombinant anti-MC-LR to its antigen and aid in the development of a higher sensitivity harmful algal toxin diagnostic.

An aptamer based fluorometric microcystin-LR assay using DNA strand-based competitive displacement

The high-affinity region of a truncated aptamer was applied to the development of a sensitive method for the determination of microcystin-LR (MC-LR) using competitive displacement and molecular beacons. In this assay, the fluorophore and quencher labelled complementary sequences of the aptamer are hybridized with the truncated aptamer to form a fluorophore-quencher pair. In the presence of MC-LR, the aptamer duplex dissociates, and the fluorophore-quencher pair is separated. This turn leads to an increase in the yellow fluorescence which is best measured at excitation/emission wavelengths of 555/580 nm. One of the truncated aptamers showed a 50-fold increase in the affinity (0.93 nM) compared to the wild type aptamer (50 nM). The truncated sequence shows considerable cross-reactivity with L congeners but none with other congeners. The assay works in 0.5 to 200 nM MC-LR concentration range. It was applied to spiked tap water samples and gave recoveries around 95 ± 5%. Graphical abstract Schematic representation of a method for determination of microcystin-LR via fluorescence that is induced by competitive displacement of complementary DNA strands in a truncated dsDNA aptamer.

A Comprehensive Review: Development of Electrochemical Biosensors for Detection of Cyanotoxins in Freshwater

Cyanobacteria harmful algal blooms are increasing in frequency and cyanotoxins have become an environmental and public concern in the U.S. and worldwide. In this Review, the majority of reported studies and developments of electrochemical affinity biosensors for cyanotoxins are critically reviewed and discussed. Essential background information about cyanobacterial toxins and electrochemical biosensors is combined with the rapidly moving development of electrochemical biosensors for these toxins. Current issues and future challenges for the development of useful electrochemical biosensors for cyanotoxin detection that meet the demands for applications in field freshwater samples are discussed. The major aspects of the entire review article in a prescribed sequence include (i) the state-of-the-art knowledge of the toxicity of cyanotoxins, (ii) important harmful algal bloom events, (iii) advisories, guidelines, and regulations, (iv) conventional analytical methods for determination of cyanotoxins, (v) electrochemical transduction, (vi) recognition receptors, (vii) reported electrochemical biosensors for cyanotoxins, (viii) summary of analytical performance, and (ix) recent advances and future trends. Discussion includes electrochemical techniques and devices, biomolecules with high affinity, numerous array designs, various detection approaches, and research strategies in tailoring the properties of the transducer-biomolecule interface. Scientific and engineering aspects are presented in depth. This review aims to serve as a valuable source to scientists and engineers entering the interdisciplinary field of electrochemical biosensors for detection of cyanotoxins in freshwaters.

Label-Free Sensitive Detection of Microcystin-LR via Aptamer-Conjugated Gold Nanoparticles Based on Solid-State Nanopores

A versatile and highly sensitive strategy for nanopore detection of microcystin-LR (MC-LR) is proposed herein based on the aptamer and host-guest interactions by employing a gold nanoparticle (AuNP) probe. The aptamer of MC-LR and its complementary DNA (cDNA) are respectively immobilized on AuNPs with distinct sizes (5 nm AuNPs for the aptamer and 20 nm for the cDNA), and the constructed polymeric AuNP network via the hybridization of the aptamer and cDNA was disintegrated upon the addition of MC-LR. The specific interactions between the aptamer and MC-LR disrupt and release the cDNA-AuNPs that were then removed by centrifugation, leaving the MC-LR-aptamer-AuNP species in the supernatant for subsequent nanopore determination. By monitoring the current blockade of released MC-LR-aptamer-AuNPs using a specific tailored nanopore (10 and 20 nm in diameter, generated by current dielectric breakdown), we could deduce the presence of MC-LR, as the bulky NP network could not pass through a nanopore with a relatively smaller size. We realized the detection of MC-LR with a concentration as low as 0.1 nM; additionally, we have proved the specificity of the interaction between the aptamer and MC-LR by replacing MC-LR with other congener toxins (MC-RR and MC-YR), chlorophyll (a component abundantly coexists in water), and the mixture of the four.

An Innovative Portable Biosensor System for the Rapid Detection of Freshwater Cyanobacterial Algal Bloom Toxins

Harmful algal blooms in freshwater systems are increasingly common and present threats to drinking water systems, recreational waters, and ecosystems. A highly innovative simple to use, portable biosensor system (MBio) for the rapid and simultaneous detection of multiple cyanobacterial toxins in freshwater is demonstrated. The system utilizes a novel planar waveguide optical sensor that delivers quantitative fluorescent competitive immunoassay results in a disposable cartridge. Data are presented for the world's first duplex microcystin (MC)/cylindrospermopsin (CYN) assay cartridge using a combination of fluorophore-conjugated monoclonal antibodies as detector molecules. The on-cartridge detection limits of 20% inhibitory concentration (IC₂₀) was 0.4 μg/L for MC and 0.7 μg/L for CYN. MC assay coverage of eight important MC congeners was demonstrated. Validation using 45 natural lake water samples from Colorado and Lake Erie showed quantitative correlation with commercially available laboratory-based enzyme linked immunosorbent assays. A novel cell lysis module was demonstrated using cyanobacteria cultures. Results show equivalent or better performance than the gold-standard but more tedious 3× freeze-thaw method, with >90% cell lysis for laboratory cultures. The MBio system holds promise as a versatile tool for multiplexed field-based cyanotoxin detection, with future analyte expansion including saxitoxin, anatoxin-a, and marine biotoxins.

Novel Microfluidic Analytical Sensing Platform for the Simultaneous Detection of Three Algal Toxins in Water

Globally, the need for "on-site" algal-toxin monitoring has become increasingly urgent due to the amplified demand for fresh-water and for safe, "toxin-free" shellfish and fish stocks. Herein, we describe the first reported, Lab-On-A-Disc (LOAD) based-platform developed to detect microcystin levels in situ, with initial detectability of saxitoxin and domoic acid also reported. Using recombinant antibody technology, the LOAD platform combines immunofluorescence with centrifugally driven microfluidic liquid handling to achieve a next-generation disposable device capable of multianalyte sampling. A low-complexity "LED-photodiode" based optical sensing system was tailor-made for the platform, which allows the fluorescence signal of the toxin-specific reaction to be quantified. This system can rapidly and accurately detect the presence of microcystin-LR, domoic acid, and saxitoxin in 30 min, with a minimum of less than 5 min end-user interaction for maximum reproducibility. This method provides a robust "point of need" diagnostic alternative to the current laborious and costly methods used for qualitative toxin monitoring.

Development of Time-Resolved Fluoroimmunoassay for Detection of Cylindrospermopsin Using Its Novel Monoclonal Antibodies

Cylindrospermopsin (CYN) is a cyanotoxin that is of particular concern for its potential toxicity to human and animal health and ecological consequences due to contamination of drinking water. The increasing emergence of CYN around the world has led to urgent development of rapid and high-throughput methods for its detection in water. In this study, a highly sensitive monoclonal antibody N8 was produced and characterized for CYN detection through the development of a direct competitive time-resolved fluorescence immunoassay (TRFIA). The newly developed TRFIA exhibited a typical sigmoidal response for CYN at concentrations of 0.01–100 ng mL⁻¹, with a wide quantitative range between 0.1 and 50 ng mL⁻¹. The detection limit of the method was calculated to be 0.02 ng mL⁻¹, which is well below the guideline value of 1 μg L⁻¹ and is sensitive enough to provide an early warning of the occurrence of CYN-producing cyanobacterial blooms. The newly developed TRFIA also displayed good precision and accuracy, as evidenced by low coefficients of variation (4.1–6.5%). Recoveries ranging from 92.6% to 108.8% were observed upon the analysis of CYN-spiked water samples. Moreover, comparison of the TRIFA with an ELISA kit through testing 76 water samples and 15 Cylindrospermopsis cultures yielded a correlation r² value of 0.963, implying that the novel immunoassay was reliable for the detection of CYN in water and algal samples.

A photoelectrochemical aptasensor constructed with core-shell CuS-TiO2 heterostructure for detection of microcystin-LR

In this work, a CuS-TiO₂ heterojunction composite was prepared by dispersedly depositing CuS nanoparticles on TiO₂ nanospheres surface with a hydrothermal method, and was then used to construct a photoelectrochemical (PEC) aptasensor for sensitive detection of microcystin-LR (MC-LR) in aquatic environment. The energy bands of CuS nanoparticles and spherical anatase TiO₂ were well matched, which enhanced the photo-to-current conversion efficiency. The composite exhibited the enhanced visible light absorption, the improved separation of photo-generated charges, and the reduced self-aggregation of CuS nanoparticles, leading to the enhanced photocurrent response. The PEC aptasensor was constructed by immobilizing CuS-TiO₂ composite on ITO electrode with chitosan film that further covalently bound aminated aptamer. After the target, microcystin-LR (MC-LR) as an analyte model, was captured by the aptamer on the aptasensor, it could be oxidized by the photo-generated hole to impede the electron-hole recombination and further amplify the photocurrent. The PEC aptasensor showed superior analytical performance for MC-LR with a linear range of 5.0 × 10^-5 nM to 250 nM and a detection limit of 2.0 × 10^-5 nM. The detection results with the aptasensor for practical water samples indicated its promising application in environmental monitoring.

Developments in Point-of-Care Diagnostic Technology for Cancer Detection

Cancer is the cause of death for one in seven individuals worldwide. It is widely acknowledged that screening and early diagnosis are of vital importance for improving the likelihood of recovery. However, given the costly, time-consuming, and invasive nature of the many methods currently in use, patients often do not take advantage of the services available to them. Consequently, many researchers are exploring the possibility of developing fast, reliable, and non-invasive diagnostic tools that can be used directly or by local physicians at the point-of-care. Herein, we look at the use of established biomarkers in cancer therapy and investigate emerging biomarkers exhibiting future potential. The incorporation of these biomarkers into point-of-care devices could potentially reduce the strain currently experienced by screening programs in hospitals and healthcare systems. Results derived from point-of-care tests should be accurate, sensitive, and generated rapidly to assist in the selection of the best course of treatment for optimal patient care. Essentially, point-of-care diagnostics should enhance the well-being of patients and lead to a reduction in cancer-related deaths.

Microcystin-LR nanobody screening from an alpaca phage display nanobody library and its expression and application

Microcystin-LR (MC-LR) is a type of biotoxin that pollutes the ecological environment and food. The study aimed to obtain new nanobodies from phage nanobody library for determination of MC-LR. The toxin was conjugated to keyhole limpet haemocyanin (KLH) and bovine serum albumin (BSA), respectively, then the conjugates were used as coated antigens for enrichment (coated MC-LR-KLH) and screening (coated MC-LR-BSA) of MC-LR phage nanobodies from an alpaca phage display nanobody library. The antigen-specific phage particles were enriched effectively with four rounds of biopanning. At the last round of enrichment, total 20 positive monoclonal phage nanobodies were obtained from the library, which were analyzed after monoclonal phage enzyme linked immunosorbent assay (ELISA), colony PCR and DNA sequencing. The most three positive nanobody genes, ANAb12, ANAb9 and ANAb7 were cloned into pET26b vector, then the nanobodies were expressed in Escherichia coli BL21 respectively. After being purified, the molecular weight (M.W.) of all nanobodies were approximate 15kDa with sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). The purified nanobodies, ANAb12, ANAb9 and ANAb7 were used to establish the indirect competitive ELISA (IC-ELISA) for MC-LR, and their half-maximum inhibition concentrations (IC₅₀) were 0.87, 1.17 and 1.47μg/L, their detection limits (IC₁₀) were 0.06, 0.08 and 0.12μg/L, respectively. All of them showed strong cross-reactivity (CRs) of 82.7-116.9% for MC-RR, MC-YR and MC-WR, and weak CRs of less than 4.56% for MC-LW, less than 0.1% for MC-LY and MC-LF. It was found that all the IC-ELISAs for MC-LR spiked in tap water samples detection were with good accuracy, stability and repeatability, their recoveries were 84.0-106.5%, coefficient of variations (CVs) were 3.4-10.6%. These results showed that IC-ELISA based on the nanobodies from the alpaca phage display antibody library were promising for high sensitive determination of multiple MCs.

Diagnosis, monitoring and prevention of exposure-related non-communicable diseases in the living and working environment: DiMoPEx-project is designed to determine the impacts of environmental exposure on human health

The WHO has ranked environmental hazardous exposures in the living and working environment among the top risk factors for chronic disease mortality. Worldwide, about 40 million people die each year from noncommunicable diseases (NCDs) including cancer, diabetes, and chronic cardiovascular, neurological and lung diseases. The exposure to ambient pollution in the living and working environment is exacerbated by individual susceptibilities and lifestyle-driven factors to produce complex and complicated NCD etiologies. Research addressing the links between environmental exposure and disease prevalence is key for prevention of the pandemic increase in NCD morbidity and mortality. However, the long latency, the chronic course of some diseases and the necessity to address cumulative exposures over very long periods does mean that it is often difficult to identify causal environmental exposures. EU-funded COST Action DiMoPEx is developing new concepts for a better understanding of health-environment (including gene-environment) interactions in the etiology of NCDs. The overarching idea is to teach and train scientists and physicians to learn how to include efficient and valid exposure assessments in their research and in their clinical practice in current and future cooperative projects. DiMoPEx partners have identified some of the emerging research needs, which include the lack of evidence-based exposure data and the need for human-equivalent animal models mirroring human lifespan and low-dose cumulative exposures. Utilizing an interdisciplinary approach incorporating seven working groups, DiMoPEx will focus on aspects of air pollution with particulate matter including dust and fibers and on exposure to low doses of solvents and sensitizing agents. Biomarkers of early exposure and their associated effects as indicators of disease-derived information will be tested and standardized within individual projects. Risks arising from some NCDs, like pneumoconioses, cancers and allergies, are predictable and preventable. Consequently, preventative action could lead to decreasing disease morbidity and mortality for many of the NCDs that are of major public concern. DiMoPEx plans to catalyze and stimulate interaction of scientists with policy-makers in attacking these exposure-related diseases.

Use of biosensors for the detection of marine toxins

Increasing occurrences of harmful algal blooms (HABs) in the ocean are a major concern for countries around the globe, and with strong links between HABs and climate change and eutrophication, the occurrences are only set to increase. Of particular concern with regard to HABs is the presence of toxin-producing algae. Six major marine biotoxin groups are associated with HABs. Ingestion of such toxins via contaminated shellfish, fish, or other potential vectors, can lead to intoxication syndromes with moderate to severe symptoms, including death in extreme cases. There are also major economic implications associated with the diverse effects of marine biotoxins and HABs. Thus, effective monitoring programmes are required to manage and mitigate their detrimental global effect. However, currently legislated detection methods are labour-intensive, expensive and relatively slow. The growing field of biosensor diagnostic devices is an exciting area that has the potential to produce robust, easy-to-use, cost-effective, rapid and accurate detection methods for marine biotoxins and HABs. This review discusses recently developed biosensor assays that target marine biotoxins and their microbial producers, both in harvested fish/shellfish samples and in the open ocean. The effective deployment of such biosensor platforms could address the pressing need for improved monitoring of HABs and marine biotoxins, and could help to reduce their global economic impact.

A pM leveled photoelectrochemical sensor for microcystin-LR based on surface molecularly imprinted TiO2@CNTs nanostructure

A simple and highly sensitive photoelectrochemical (PEC) sensor towards Microcystin-LR (MC-LR), a kind of typical cyanobacterial toxin in water samples, was developed on a surface molecular imprinted TiO₂ coated multiwalled carbon nanotubes (MI-TiO₂@CNTs) hybrid nanostructure. It was synthesized using a feasible two-step sol-gel method combining with in situ surface molecular imprinting technique (MIT). With a controllable core-shell tube casing structure, the resultant MI-TiO₂@CNTs are enhanced greatly in visible-light driven response capacity. In comparison with the traditional TiO₂ (P25) and non-imprinted (NI-)TiO₂@CNTs, the MI-TiO₂@CNTs based PEC sensor showed a much higher photoelectric oxidation capacity towards MC-LR. Using this sensor, the determination of MC-LR was doable in a wide linear range from 1.0pM to 3.0nM with a high photocurrent response sensitivity. An outstanding selectivity towards MC-LR was further achieved with this sensor, proven by simultaneously monitoring 100-fold potential co-existing interferences. The superiority of the obtained MC-LR sensor in sensitivity and selectivity is mainly attributed to the high specific surface area and excellent photoelectric activity of TiO₂@CNTs heterojunction structure, as well as the abundant active recognition sites on its functionalized molecular imprinting surface. A promising PEC analysis platform with high sensitivity and selectivity for MC-LR has thus been provided.

Sorption of his-tagged Protein G and Protein G onto chitosan/divalent metal ion sorbent used for detection of microcystin-LR

A highly sensitive, specific, simple, and rapid chemiluminescence enzyme immunoassay (CLEIA) was developed for the determination of microcystin-LR (MC-LR) by using strategies for oriented immobilization of functionally intact polyclonal antibodies on chitosan surface. Several physicochemical parameters such as metal ion adsorption, hexahistidine-tagged Protein G sorption, the dilution ratio polyclonal antibody concentration, and peroxidase-labeled MC-LR concentration were studied and optimized. The sorption in batch system of G-histidine and G-proteins was studied on a novel sorbent consisting of chitosan/divalent metal ions. Transition metals as Ni⁺⁺ and Zn⁺⁺ were immobilized through interaction with -NH₂ groups of chitosan in order to supply a material capable to efficiently remove the proteins from aqueous solutions. The maximum uptake of divalent metals onto the chitosan material was found to be 230 mg g^-1 for Zn⁺⁺ and 62 mg g^-1 for Ni⁺⁺. Experimental data were evaluated using the Langmuir and Freundlich models; the results were well fitted with the Langmuir model; chitosan/Ni⁺⁺ foam was found to be the best sorbent for G-protein, maximum sorption capacity obtained was 17 mg g^-1, and chitosan/Zn⁺⁺ was found to be the best for G-histidine with a maximum sorption capacity of 44 mg g^-1. Kinetic data was evaluated with pseudo-first- and pseudo-second-order models; the sorption kinetics were in all cases better represented by a pseudo-second-order model. Under optimum conditions, the calibration curve obtained for MC-LR gave detection limits of 0.5 ± 0.06 μg L^-1, the 50 % inhibition concentration (IC50) was 2.75 ± 0.03 μg L^-1, and the quantitative detection range was 0.5-25 μg L^-1. The limit of detection (LOD) attained from the calibration curves and the results obtained demonstrate the potential use of CLEIA with chitosan support as a screening tool for the analysis of pollutants in environmental samples.

Fluorescence based fiber optic and planar waveguide biosensors. A review

The application of optical biosensors, specifically those that use optical fibers and planar waveguides, has escalated throughout the years in many fields, including environmental analysis, food safety and clinical diagnosis. Fluorescence is, without doubt, the most popular transducer signal used in these devices because of its higher selectivity and sensitivity, but most of all due to its wide versatility. This paper focuses on the working principles and configurations of fluorescence-based fiber optic and planar waveguide biosensors and will review biological recognition elements, sensing schemes, as well as some major and recent applications, published in the last ten years. The main goal is to provide the reader a general overview of a field that requires the joint collaboration of researchers of many different areas, including chemistry, physics, biology, engineering, and material science.

New biorecognition molecules in biosensors for the detection of toxins

Biological and synthetic recognition elements are at the heart of the majority of modern bioreceptor assays. Traditionally, enzymes and antibodies have been integrated in the biosensor designs as a popular choice for the detection of toxin molecules. But since 1970s, alternative biological and synthetic binders have been emerged as a promising alternative to conventional biorecognition elements in detection systems for laboratory and field-based applications. Recent research has witnessed immense interest in the use of recombinant enzymatic methodologies and nanozymes to circumvent the drawbacks associated with natural enzymes. In the area of antibody production, technologies based on the modification of in vivo synthesized materials and in vitro approaches with development of "display "systems have been introduced in the recent years. Subsequently, molecularly-imprinted polymers and Peptide nucleic acid (PNAs) were developed as an attractive receptor with applications in the area of sample preparation and detection systems. In this article, we discuss all alternatives to conventional biomolecules employed in the detection of various toxin molecules We review recent developments in modified enzymes, nanozymes, nanobodies, aptamers, peptides, protein scaffolds and DNazymes. With the advent of nanostructures and new interface materials, these recognition elements will be major players in future biosensor development.

'Zipbody' leucine zipper-fused Fab in E. coli in vitro and in vivo expression systems

A small antibody fragment, fragment of antigen binding (Fab), is favorable for various immunological assays. However, production efficiency of active Fab in microorganisms depends considerably on the clones. In this study, leucine zipper-peptide pairs that dimerize in parallel (ACID-p1 (LZA)/BASE-p1 (LZB) or c-Jun/c-Fos) were fused to the C-terminus of heavy chain (Hc, VH-CH1) and light chain (Lc, VL-CL), respectively, to accelerate the association of Hc and Lc to form Fab in Escherichia coli in vivo and in vitro expression systems. The leucine zipper-fused Fab named 'Zipbody' was constructed using anti-E. coli O157 monoclonal antibody obtained from mouse hybridoma and produced in both in vitro and in vivo expression systems in an active form, whereas Fab without the leucine zipper fusion was not. Similarly, Zipbody of rabbit monoclonal antibody produced in in vitro expression showed significant activity. The purified, mouse Zipbody produced in the E. coli strain Shuffle T7 Express had specificity toward the antigen; in bio-layer interferometry analysis, the KD value was measured to be 1.5-2.0 × 10(-8) M. These results indicate that leucine zipper fusion to Fab C-termini markedly enhances active Fab formation in E. coli.

Evanescent wave fluorescence biosensors: Advances of the last decade

Biosensor development has been a highly dynamic field of research and has progressed rapidly over the past two decades. The advances have accompanied the breakthroughs in molecular biology, nanomaterial sciences, and most importantly computers and electronics. The subfield of evanescent wave fluorescence biosensors has also matured dramatically during this time. Fundamentally, this review builds on our earlier 2005 review. While a brief mention of seminal early work will be included, this current review will focus on new technological developments as well as technology commercialized in just the last decade. Evanescent wave biosensors have found a wide array applications ranging from clinical diagnostics to biodefense to food testing; advances in those applications and more are described herein.

A portable optical waveguide resonance light-scattering scanner for microarray detection

In the present work, a portable and low-cost planar waveguide based resonance light scattering (RLS) scanner (termed as: PW-RLS scanner) has been developed for microarray detection. The PW-RLS scanner employs a 2 × 4 white light emitting diode array (WLEDA) as the excitation light source, a folded optical path with a complementary metal oxide semiconductor (CMOS) as the signal/image acquisition device and stepper motors with gear drives as the mechanical drive system. The biological binding/recognizing events on the microarray can be detected with an evanescent waveguide-directed illumination and light-scattering label (e.g., nanoparticles) while the microarray slide acts as an evanescent waveguide substrate. The performance of the as-developed PW-RLS scanner has been evaluated by analyzing type 2 diabetes mellitus (T2DM) risk genes. Highly selective and sensitive (less than 1% allele frequency at the attomole-level) T2DM risk gene detection is achieved using single-stranded DNA functionalized gold nanoparticles (ssDNA-GNPs) as detection probes. Additionally, the successful simultaneous analysis of 15 T2DM patient genotypes suggests that the device has great potential for the realization of a personalized diagnostic test for a given disease or patient follow-up.

Au nanoflower–Ag nanoparticle assembled SERS-active substrates for sensitive MC-LR detection

Au nanoflower–Ag nanoparticle core–satellite assembly engineered Raman aptasensors achieved the sensitive detection of microcystin-LR in Tai lake water.