Highly sensitive sandwich-type SPR based detection of whole H5Nx viruses using a pair of aptamers

A novel fluorescent aptasensor for sensitive and selective detection of environmental toxins fumonisin B1 based on enzyme-assisted dual recycling amplification and 2D δ-FeOOH-NH2 nanosheets

Fumonisin (FB) is a pervasive hazardous substance in the environment, presenting significant threats to human health and ecological systems. Thus, the selective and sensitive detection of fumonisin B1 (FB1) is crucial due to its high toxicity and wide distribution in corn, oats, and related products. In this work, we developed a novel and versatile fluorescent aptasensor by combining enzyme-assisted dual recycling amplification with 2D δ-FeOOH-NH2 nanosheets for the determination of FB1. The established CRISPR/Cas12a system was activated by using activator DNA (aDNA), which was released via a T7 exonuclease-assisted recycling reaction. Additionally, the activated Cas12a protein was utilized for non-specifically cleavage of the FAM-labeled single-stranded DNA (ssDNA-FAM) anchored on δ-FeOOH-NH2 nanosheets. The pre-quenched fluorescence signal was restored due to the desorption of the cleaved ssDNA-FAM. Due to the utilization of this T7 exonuclease-Cas12a-δ-FeOOH-NH2 aptasensor for signal amplification, the detection range of FB1 was expanded from 1 pg/mL to 100 ng/mL, with a limit of detection (LOD) as low as 0.45 pg/mL. This study not only provides novel insights into the development of fluorescence biosensors based on 2D nanomaterials combined with CRISPR/Cas12a, but also exhibits remarkable applicability in detecting other significant targets.

Antibody-independent surface plasmon resonance assays for influenza vaccine quality control

Surface plasmon resonance (SPR)-based biosensors have emerged as a powerful platform for bioprocess monitoring due to their ability to detect biointeractions in real time, without the need for labeling. Paramount for the development of a robust detection platform is the immobilization of a ligand with high specificity and affinity for the in-solution species of interest. Following the 2009 H1N1 pandemic, much effort has been made toward the development of quality control platforms for influenza A vaccine productions, many of which have employed SPR for detection. Due to the rapid antigenic drift of influenza's principal surface protein, hemagglutinin, antibodies used for immunoassays need to be produced seasonally. The production of these antibodies represents a 6-8-week delay in immunoassay and, thus, vaccine availability. This review focuses on SPR-based assays that do not rely on anti-HA antibodies for the detection, characterization, and quantification of influenza A in bioproductions and biological samples. KEY POINTS: • The single radial immunodiffusion assay (SRID) has been the gold standard for the quantification of influenza vaccines since 1979. Due to antigenic drift of influenza's hemagglutinin protein, new antibody reagents for the SRID assay must be produced each year, requiring 6-8 weeks. The resulting delay in immunoassay availability is a major bottleneck in the influenza vaccine pipeline. This review highlights ligand options for the detection and quantification of influenza viruses using surface plasmon resonance biosensors.

Rational Design of Trident Aptamer Scaffold for Rapid and Accurate Monitoring of 25-Hydroxyvitamin D3 Metabolism in Living Cells

The level of 25-hydroxyvitamin D₃ [25(OH)VD3] in human blood is considered as the best indicator of vitamin D status, and its deficiency or excess can lead to various health problems. Current methods for monitoring 25(OH)VD3 metabolism in living cells have limitations in terms of sensitivity and specificity and are often expensive and time-consuming. To address these issues, an innovative trident scaffold-assisted aptasensor (TSA) system has been developed for the online quantitative monitoring of 25(OH)VD3 in complex biological environments. Through the computer-aided design, the TSA system includes an aptamer molecule recognition layer that is uniformly oriented, maximizing binding site availability, and enhancing sensitivity. The TSA system achieved the direct, highly sensitive, and selective detection of 25(OH)VD3 over a wide concentration range (17.4-12,800 nM), with a limit of detection of 17.4 nM. Moreover, we evaluated the efficacy of the system in monitoring the biotransformation of 25(OH)VD3 in human liver cancer cells (HepG2) and normal liver cells (L-02), demonstrating its potential as a platform for drug-drug interaction studies and candidate drug screening.

Nucleocapsid protein binding DNA aptamers for detection of SARS-COV-2

The severe acute respiratory syndrome coronavirus (SARS-CoV-2) has infected millions of individuals and continues to be a major health concern worldwide. While reverse transcription-polymerase chain reaction remains a reliable method for detecting infections, limitations of this technology, particularly cost and the requirement of a dedicated laboratory, prevent rapid viral monitoring. Antigen tests filled this need to some extent but with limitations including sensitivity and specificity, particularly against emerging variants of concern. Here, we developed aptamers against the SARS-CoV-2 Nucleocapsid protein to complement or replace antibodies in antigen detection assays. As detection reagents in ELISA-like assays, our DNA aptamers were able to detect as low as 150 pg/mL of the protein and under 150 k copies of inactivated SARS-CoV-2 Wuhan Alpha strain in viral transport medium with little cross-reactivity to other human coronaviruses (HCoVs). Further, our aptamers were reselected against the SARS-CoV-2 Omicron variant of concern, and we found two sequences that had a more than two-fold increase in signal compared to our original aptamers when used as detection reagents against protein from the Omicron strain. These findings illustrate the use of aptamers as promising alternative detection reagents that may translate for use in current tests and our findings validate the method for the reselection of aptamers against emerging viral strains.

Localized surface plasmon resonance biosensor chip surface modification and signal amplifications toward rapid and sensitive detection of COVID-19 infections

We developed a multi-pronged approach to enhance the detection sensitivity of localized surface plasmon resonance (LSPR) sensor chips to detect SARS-CoV-2. To this end, poly(amidoamine) dendrimers were immobilized onto the surface of LSPR sensor chips to serve as templates to further conjugate aptamers specific for SARS-CoV-2. The immobilized dendrimers were shown to reduce surface nonspecific adsorptions and increase capturing ligand density on the sensor chips, thereby improving detection sensitivity. To characterize the detection sensitivity of the surface-modified sensor chips, SARS-CoV-2 spike protein receptor-binding domain was detected using LSPR sensor chips with different surface modifications. The results showed that the dendrimer-aptamer modified LSPR sensor chip exhibited a limit of detection (LOD) of 21.9 pM, a sensitivity that was 9 times and 152 times more sensitive than the traditional aptamer- or antibody-based LSPR sensor chips, respectively. In addition, detection sensitivity was further improved by combining rolling circle amplification product and gold nanoparticles to further amplify the detection signals by increasing both the target mass and plasmonic coupling effects. Using pseudo SARS-CoV-2 viral particles as detection targets, we demonstrated that this combined signal intensification approach further enhanced the detection sensitivity by 10 folds with a remarkable LOD of 148 vp/mL, making it one of the most sensitive SARS-CoV-2 detection assays reported to date. These results highlight the potential of a novel LSPR-based detection platform for sensitive and rapid detection of COVID-19 infections, as well as other viral infections and point-of-care applications.

Sandwich-Type Electrochemical Aptasensor for Highly Sensitive and Selective Detection of Pseudomonas Aeruginosa Bacteria Using a Dual Signal Amplification Strategy

An electrochemical aptasensor developed to realize the detection of Pseudomonas aeruginosa (P. aeruginosa) bacteria based on a signal amplification strategy. The carbon screen-printed electrode (CSPE) surface was modified by MIL-101(Cr)/Multi-walled carbon nanotubes (MWCNT), which significantly increased the effective surface area of the electrode, thus resulting in further F23 aptamer immobilization at the surface of the modified electrode. As a result, the P. aeruginosa can be efficiently captured onto the surface of the aptasensor. Moreover, aptamer immobilized on the two-dimensional graphitic carbon nitride complex with silver nanoparticles (AgNPs/c-g-C₃N₄/Apt) was used as an electrochemical signal label, connected to P. aeruginosa bacteria at the modified electrode. This strategy increased the aptamer surface density and the sensitivity for detecting P. aeruginosa. Also, the resultant material was thoroughly characterized using Fourier transform infrared (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) analysis techniques. A highly sensitive voltammetric aptasensor for P. aeruginosa detection was obtained via this strategy at the limit of detection of 1 Colony-forming unit (CFU)/mL (σ = 3). Therefore, this proposed strategy with dual signal amplification can be a promising platform for simple, practical, reliable, and sensitive method for P. aeruginosa.

Aptamer-based Emerging Tools for Viral Biomarker Detection: A Focus on SARS-CoV-2

Viral infections can cause fatal illnesses to humans as well as animals. Early detection of viruses is therefore crucial to provide effective treatment to patients. Recently, the Covid-19 pandemic has undoubtedly given an alarming call to develop rapid and sensitive detection platforms. The viral diagnostic tools need to be fast, affordable, and easy to operate with high sensitivity and specificity equivalent or superior to the currently used diagnostic methods. The present detection methods include direct detection of viral antigens or measuring the response of antibodies to viral infections. However, the sensitivity and quantification of the virus are still a significant challenge. Detection tools employing synthetic binding molecules like aptamers may provide several advantages over the conventional methods that use antibodies in the assay format. Aptamers are highly stable and tailorable molecules and are therefore ideal for detection and chemical sensing applications. This review article discusses various advances made in aptamer-based viral detection platforms, including electrochemical, optical, and colorimetric methods to detect viruses, specifically SARS-Cov-2. Considering the several advantages, aptamers could be game-changing in designing high-throughput biosensors for viruses and other biomedical applications in the future.

Aptamer-based biosensors for virus protein detection

Virus threatens life health seriously. The accurate early diagnosis of the virus is vital for clinical control and treatment of virus infection. Aptamers are small single-stranded oligonucleotides (DNAs or RNAs). In this review, we summarized aptasensors for virus detection in recent years according to the classification of the viral target protein, and illustrated common detection mechanisms in the aptasensors (colorimetry, fluorescence assay, surface plasmon resonance (SPR), surface-enhanced raman spectroscopy (SERS), electrochemical detection, and field-effect transistor (FET)). Furthermore, aptamers against different target proteins of viruses were summarized. The relationships between the different biomarkers of the viruses and the detection methods, and their performances were revealed. In addition, the challenges and future directions of aptasensors were discussed. This review will provide valuable references for constructing on-site aptasensors for detecting viruses, especially the SARS-CoV-2.

Aptamers: A prospective tool for infectious diseases diagnosis

It is well known that people's health is seriously threatened by various pathogens (such as Mycobacterium tuberculosis, Treponema pallidum, Novel coronavirus, HIV, Mucor, etc.), which leads to heavy socioeconomic burdens. Therefore, early and accurate pathogen diagnosis is essential for timely and effective therapies. Up to now, diagnosing human contagious diseases at molecule and nano levels is remarkably difficult owing to insufficient valid probes when it comes to determining the biological markers of pathogens. Aptamers are a set of high‐specificity and high‐sensitivity plastic oligonucleotides screened in vitro via the selective expansion of ligands by exponential enrichment (SELEX). With the advent of aptamer‐based technologies, their merits have aroused mounting academic interest. In recent years, as new detection and treatment tools, nucleic acid aptamers have been extensively utilized in the field of biomedicine, such as pathogen detection, new drug development, clinical diagnosis, nanotechnology, etc. However, the traditional SELEX method is cumbersome and has a long screening cycle, and it takes several months to screen out aptamers with high specificity. With the persistent development of SELEX‐based aptamer screening technologies, the application scenarios of aptamers have become more and more extensive. The present research briefly reviews the research progress of nucleic acid aptamers in the field of biomedicine, especially in the diagnosis of contagious diseases.

Boosting the detection performance of severe acute respiratory syndrome coronavirus 2 test through a sensitive optical biosensor with new superior antibody

The severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus emerged in late 2019 leading to the COVID-19 disease pandemic that triggered socioeconomic turmoil worldwide. A precise, prompt, and affordable diagnostic assay is essential for the detection of SARS-CoV-2 as well as its variants. Antibody against SARS-CoV-2 spike (S) protein was reported as a suitable strategy for therapy and diagnosis of COVID-19. We, therefore, developed a quick and precise phase-sensitive surface plasmon resonance (PS-SPR) biosensor integrated with a novel generated anti-S monoclonal antibody (S-mAb). Our results indicated that the newly generated S-mAb could detect the original SARS-CoV-2 strain along with its variants. In addition, a SARS-CoV-2 pseudovirus, which could be processed in BSL-2 facility was generated for evaluation of sensitivity and specificity of the assays including PS-SPR, homemade target-captured ELISA, spike rapid antigen test (SRAT), and quantitative reverse transcription polymerase chain reaction (qRT-PCR). Experimentally, PS-SPR exerted high sensitivity to detect SARS-CoV-2 pseudovirus at 589 copies/ml, with 7-fold and 70-fold increase in sensitivity when compared with the two conventional immunoassays, including homemade target-captured ELISA (4 × 103 copies/ml) and SRAT (4 × 104 copies/ml), using the identical antibody. Moreover, the PS-SPR was applied in the measurement of mimic clinical samples containing the SARS-CoV-2 pseudovirus mixed with nasal mucosa. The detection limit of PS-SPR is calculated to be 1725 copies/ml, which has higher accuracy than homemade target-captured ELISA (4 × 104 copies/ml) and SRAT (4 × 105 copies/ml) and is comparable with qRT-PCR (1250 copies/ml). Finally, the ability of PS-SPR to detect SARS-CoV-2 in real clinical specimens was further demonstrated, and the assay time was less than 10 min. Taken together, our results indicate that this novel S-mAb integrated into PS-SPR biosensor demonstrates high sensitivity and is time-saving in SARS-CoV-2 virus detection. This study suggests that incorporation of a high specific recognizer in SPR biosensor is an alternative strategy that could be applied in developing other emerging or re-emerging pathogenic detection platforms.

Analytical Considerations of Large-Scale Aptamer-Based Datasets for Translational Applications

The development and advancement of aptamer technology has opened a new realm of possibilities for unlocking the biocomplexity available within proteomics. With ultra-high-throughput and multiplexing, alongside remarkable specificity and sensitivity, aptamers could represent a powerful tool in disease-specific research, such as supporting the discovery and validation of clinically relevant biomarkers. One of the fundamental challenges underlying past and current proteomic technology has been the difficulty of translating proteomic datasets into standards of practice. Aptamers provide the capacity to generate single panels that span over 7000 different proteins from a singular sample. However, as a recent technology, they also present unique challenges, as the field of translational aptamer-based proteomics still lacks a standardizing methodology for analyzing these large datasets and the novel considerations that must be made in response to the differentiation amongst current proteomic platforms and aptamers. We address these analytical considerations with respect to surveying initial data, deploying proper statistical methodologies to identify differential protein expressions, and applying datasets to discover multimarker and pathway-level findings. Additionally, we present aptamer datasets within the multi-omics landscape by exploring the intersectionality of aptamer-based proteomics amongst genomics, transcriptomics, and metabolomics, alongside pre-existing proteomic platforms. Understanding the broader applications of aptamer datasets will substantially enhance current efforts to generate translatable findings for the clinic.

Real-Time Detection of LAMP Products of African Swine Fever Virus Using Fluorescence and Surface Plasmon Resonance Method

African swine fever (ASF) is a swine disease with a very high fatality rate caused by a complex double-stranded DNA virus. The fluorescence PCR detection method is widely used for virus nucleic acid detection. Surface plasmon resonance (SPR) is a label-free and real-time detection method, unlike the fluorescence PCR detection method. In this research, we detected the loop-mediated isothermal amplification (LAMP) products of the African swine fever virus by using the SPR and fluorescence methods separately and simultaneously. By comparing the positive and negative control results, we found that the SPR response unit is completely different before and after the LAMP process. In addition, the fluorescence results on a chip showed that with an increase in the concentration of the sample, the cycle threshold (CT) value decreased, which is consistent with commercial instruments. Both the decline rate of the SPR response unit and the CT value of the fluorescence realized were used to distinguish the positive control from the negative control and water, which indicates that the SPR method can be combined with fluorescence to detect LAMP products. This research provides a label-free and simple method for detecting LAMP products.

Single Virus Detection on Silicon Photonic Crystal Random Cavities

On-chip silicon microcavity sensors are advantageous for the detection of virus and biomolecules due to their compactness and the enhanced light-matter interaction with the analyte. While their theoretical sensitivity is at the single-molecule level, the fabrication of high quality (Q) factor silicon cavities and their integration with optical couplers remain as major hurdles in applications such as single virus detection. Here, label-free single virus detection using silicon photonic crystal random cavities is proposed and demonstrated. The sensor chips consist of free-standing silicon photonic crystal waveguides and do not require pre-fabricated defect cavities or optical couplers. Residual fabrication disorder results in Anderson-localized cavity modes which are excited by a free space beam. The Q ≈10⁵ is sufficient for observing discrete step-changes in resonance wavelength for the binding of single adenoviruses (≈50 nm radius). The authors' findings point to future applications of CMOS-compatible silicon sensor chips supporting Anderson-localized modes that have detection capabilities at the level of single nanoparticles and molecules.

Applications of Surface Plasmon Resonance and Biolayer Interferometry for Virus–Ligand Binding

Surface plasmon resonance and biolayer interferometry are two common real-time and label-free assays that quantify binding events by providing kinetic parameters. There is increased interest in using these techniques to characterize whole virus-ligand interactions, as the methods allow for more accurate characterization than that of a viral subunit-ligand interaction. This review aims to summarize and evaluate the uses of these technologies specifically in virus–ligand and virus-like particle–ligand binding cases to guide the field towards studies that apply these robust methods for whole virus-based studies.

Nucleic Acid-Based Nanobiosensor (NAB) Used for Salmonella Detection in Foods: A Systematic Review

Salmonella bacteria is a foodborne pathogen found mainly in food products causing severe symptoms in the individual, such as diarrhea, fever, and abdominal cramps after consuming the infected food, which can be fatal in some severe cases. Rapid and selective methods to detect Salmonella bacteria can prevent outbreaks when ingesting contaminated food. Nanobiosensors are a highly sensitive, simple, faster, and lower cost method for the rapid detection of Salmonella, an alternative to conventional enzyme-linked immunosorbent assay (ELISA) and polymerase chain reaction (PCR) techniques. This study systematically searched and analyzed literature data related to nucleic acid-based nanobiosensors (NABs) with nanomaterials to detect Salmonella in food, retrieved from three databases, published between 2010 and 2021. We extracted data and critically analyzed the effect of nanomaterial functionalized with aptamer or DNA at the limit of detection (LOD). Among the nanomaterials, gold nanoparticles (AuNPs) were the most used nanomaterial in studies due to their unique optical properties of the metal, followed by magnetic nanoparticles (MNPs) of Fe₃O₄, copper nanoparticles (CuNPs), and also hybrid nanomaterials multiwalled carbon nanotubes (c-MWCNT/AuNP), QD/UCNP-MB (quantum dotes upconverting nanoparticle of magnetic beads), and cadmium telluride quantum dots (CdTe QDs@MNPs) showed excellent LOD values. The transducers used for detection also varied from electrochemical, fluorescent, surface-enhanced Raman spectroscopy (SERS), RAMAN spectroscopy, and mainly colorimetric due to the possibility of visualizing the detection result with the naked eye. Furthermore, we show the magnetic separation system capable of detecting the target amplification of the genetic material. Finally, we present perspectives, future research, and opportunities to use point-of-care (POC) diagnostic devices as a faster and lower cost approach for detecting Salmonella in food as they prove to be viable for resource-constrained environments such as field-based or economically limited conditions.

A new cognate aptamer pair-based sandwich-type electrochemical biosensor for sensitive detection of Staphylococcus aureus

A pair of aptamers for Staphylococcus aureus (S. aureus) is immensely needed for developing sandwich-type signal-on electrochemical aptasensors. In this study, we have successfully developed a cognate pair of aptamers that bind to S. aureus simultaneously, among many aptamer candidates screened out after a total of ten rounds of bacterial cell-based systemic evolution of ligands by exponential enrichment (SELEX). The obtained aptamer candidates have been estimated by using flow cytometry and confocal microscope, to evaluate their binding affinity and specificity to the target cells. The screening for sandwich-type binding of cognate pair of aptamers with S. aureus was conducted by enzyme-based colorimetric assay and confirmed by circular dichroism (CD), two-color fluorescence imaging analysis, additionally. The cognate pair of two aptamers, named SA37 and SA81, showed very good affinity and specificity to S. aureus with their dissociation constants (Kd) of 16.5 ± 3.4 nM and 14.47 ± 8.18 nM, respectively. These newly discovered cognate pair of aptamers have been very successfully implemented to develop a sandwich-type signal-on electrochemical biosensor with the limit of detection (LOD) of 39 CFUs and 414 CFUs in buffer and spiked tap water samples, respectively. This study showed that this cognate pair of aptamers-based detection of S. aureus enables simple, rapid, and robust biosensors for food safety management.

Aptasensors for the detection of infectious pathogens: design strategies and point-of-care testing

The epidemic of infectious diseases caused by contagious pathogens is a life-threatening hazard to the entire human population worldwide. A timely and accurate diagnosis is the critical link in the fight against infectious diseases. Aptamer-based biosensors, the so-called aptasensors, employ nucleic acid aptamers as bio-receptors for the recognition of target pathogens of interest. This review focuses on the design strategies as well as state-of-the-art technologies of aptasensor-based diagnostics for infectious pathogens (mainly bacteria and viruses), covering the utilization of three major signal transducers, the employment of aptamers as recognition moieties, the construction of versatile biosensing platforms (mostly micro and nanomaterial-based), innovated reporting mechanisms, and signal enhancement approaches. Advanced point-of-care testing (POCT) for infectious disease diagnostics are also discussed highlighting some representative ready-to-use devices to address the urgent needs of currently prevalent coronavirus disease 2019 (COVID-19). Pressing issues in aptamer-based technology and some future perspectives of aptasensors are provided for the implementation of aptasensor-based diagnostics into practical application.

Construction and bioapplications of aptamer-based dual recognition strategy

Aptamer-based dual recognition strategy, using dual aptamers or the cooperation of aptamers with other recognition elements, can better utilize the advantages of each recognition molecule and increase the design flexibility to effectively overcome the limitations of a single molecule recognition strategy, thereby improving the sensitivity and selectivity and facilitating the regulation of biological process. Hence, this review systematically tracks the construction and application of dual aptamers recognition strategy in the versatile detection of protein biomarkers, pathogenic microorganisms, cancer cells, and the treatment of some diseases and, more importantly, in functional regulation and imaging of cell-surface protein receptors. Then, the cooperation of aptamers with other recognition elements are briefly introduced. Potential challenges facing this field have been highlighted, aiming to expand bioanalytical applications of aptamer-based dual or multiple recognition strategies and meet the growing demand for precision medicine.

Aptamer Sandwich Assay for the Detection of SARS-CoV-2 Spike Protein Antigen

The novel severe acute respiratory syndrome coronavirus (SARS-CoV-2) emerged at the end of 2019, resulting in the ongoing COVID-19 pandemic. The high transmissibility of the virus and the substantial number of asymptomatic individuals have led to an exponential rise in infections worldwide, urgently requiring global containment strategies. Reverse transcription-polymerase chain reaction is the gold standard for the detection of SARS-CoV-2 infections. Antigen tests, targeting the spike (S) or nucleocapsid (N) viral proteins, are considered as complementary tools. Despite their shortcomings in terms of sensitivity and specificity, antigen tests could be deployed for the detection of potentially contagious individuals with high viral loads. In this work, we sought to develop a sandwich aptamer-based assay for the detection of the S protein of SARS-CoV-2. A detailed study on the binding properties of aptamers to the receptor-binding domain of the S protein in search of aptamer pairs forming a sandwich is presented. Screening of aptamer pairs and optimization of assay conditions led to the development of a laboratory-based sandwich assay able to detect 21 ng/mL (270 pM) of the protein with negligible cross-reactivity with the other known human coronaviruses. The detection of 375 pg of the protein in viral transport medium demonstrates the compatibility of the assay with clinical specimens. Finally, successful detection of the S antigen in nasopharyngeal swab samples collected from suspected patients further establishes the suitability of the assay for screening purposes as a complementary tool to assist in the control of the pandemic.

Aptamer duo-based portable electrochemical biosensors for early diagnosis of periodontal disease

Recently, point-of-care tests (POCT) have gained much attention due to their convenient, fast, simple, and easy characteristics. For POCT, portability is an essential feature. In this study, we have successfully fabricated a portable mini-potentiostat. Using chronoamperometry, electrical signals of this portable mini-potentiostat were measured, and the analytical performance of electrochemical aptasensors was compared with a benchtop potentiostat. The electrochemical signals measured by mini-potentiostat can be displayed on the screen of a smartphone. To verify the analytical performance of this portable electrochemical aptasensor platform with a mini-potentiostat, two well-known model protein biomarkers, vaspin, a type 2 diabetes biomarker, and thrombin, a biomarker for pulmonary metastasis and cardiovascular disease, were confirmed to be detected by using corresponding aptamer duo. After solid verification of this portable electrochemical aptasensor platform, we have successfully implemented this portable mini-potentiostat system to develop a portable sandwich-type binding pair of aptamers-based electrochemical biosensor, which can diagnose periodontal disease by measuring ODAM biomarker. The linear range of this ODAM biosensor was 0 to 15 nM with a detection limit of 0.02 nM and 1 nM in buffer and saliva, respectively. The sensitivity of this biosensor has been greatly enhanced, compared to previously developed surface plasmon resonance (SPR) or lateral flow assay (LFA) based aptasensors. This study showed that this new portable aptamer duo-based biosensor is expected to diagnose the early stage of periodontal diseases from real samples, such as saliva or gingival crevicular fluid in a short time as a point-of-care (POC) testing.

Optical Biosensors for Diagnostics of Infectious Viral Disease: A Recent Update

The design and development of biosensors, analytical devices used to detect various analytes in different matrices, has emerged. Biosensors indicate a biorecognition element with a physicochemical analyzer or detector, i.e., a transducer. In the present scenario, various types of biosensors have been deployed in healthcare and clinical research, for instance, biosensors for blood glucose monitoring. Pathogenic microbes are contributing mediators of numerous infectious diseases that are becoming extremely serious worldwide. The recent outbreak of COVID-19 is one of the most recent examples of such communal and deadly diseases. In efforts to work towards the efficacious treatment of pathogenic viral contagions, a fast and precise detection method is of the utmost importance in biomedical and healthcare sectors for early diagnostics and timely countermeasures. Among various available sensor systems, optical biosensors offer easy-to-use, fast, portable, handy, multiplexed, direct, real-time, and inexpensive diagnosis with the added advantages of specificity and sensitivity. Many progressive concepts and extremely multidisciplinary approaches, including microelectronics, microelectromechanical systems (MEMSs), nanotechnologies, molecular biology, and biotechnology with chemistry, are used to operate optical biosensors. A portable and handheld optical biosensing device would provide fast and reliable results for the identification and quantitation of pathogenic virus particles in each sample. In the modern day, the integration of intelligent nanomaterials in the developed devices provides much more sensitive and highly advanced sensors that may produce the results in no time and eventually help clinicians and doctors enormously. This review accentuates the existing challenges engaged in converting laboratory research to real-world device applications and optical diagnostics methods for virus infections. The review's background and progress are expected to be insightful to the researchers in the sensor field and facilitate the design and fabrication of optical sensors for life-threatening viruses with broader applicability to any desired pathogens.

Novel Biorecognition Elements against Pathogens in the Design of State-of-the-Art Diagnostics

Infectious agents, especially bacteria and viruses, account for a vast number of hospitalisations and mortality worldwide. Providing effective and timely diagnostics for the multiplicity of infectious diseases is challenging. Conventional diagnostic solutions, although technologically advanced, are highly complex and often inaccessible in resource-limited settings. An alternative strategy involves convenient rapid diagnostics which can be easily administered at the point-of-care (POC) and at low cost without sacrificing reliability. Biosensors and other rapid POC diagnostic tools which require biorecognition elements to precisely identify the causative pathogen are being developed. The effectiveness of these devices is highly dependent on their biorecognition capabilities. Naturally occurring biorecognition elements include antibodies, bacteriophages and enzymes. Recently, modified molecules such as DNAzymes, peptide nucleic acids and molecules which suffer a selective screening like aptamers and peptides are gaining interest for their biorecognition capabilities and other advantages over purely natural ones, such as robustness and lower production costs. Antimicrobials with a broad-spectrum activity against pathogens, such as antibiotics, are also used in dual diagnostic and therapeutic strategies. Other successful pathogen identification strategies use chemical ligands, molecularly imprinted polymers and Clustered Regularly Interspaced Short Palindromic Repeats-associated nuclease. Herein, the latest developments regarding biorecognition elements and strategies to use them in the design of new biosensors for pathogens detection are reviewed.

Aptamer-based diagnostic and therapeutic approaches in animals: Current potential and challenges

Fast and precise diagnosis of infectious and non-infectious animal diseases and their targeted treatments are of utmost importance for their clinical management. The existing biochemical, serological and molecular methods of disease diagnosis need improvement in their specificity, sensitivity and cost and, are generally not amenable for being used as points-of-care (POC) device. Further, with dramatic changes in environment and farm management practices, one should also arm ourselves and prepare for emerging and re-emerging animal diseases such as cancer, prion diseases, COVID-19, influenza etc. Aptamer – oligonucleotide or short peptides that can specifically bind to target molecules – have increasingly become popular in developing biosensors for sensitive detection of analytes, pathogens (bacteria, virus, fungus, prions), drug residues, toxins and, cancerous cells. They have also been proven successful in the cellular delivery of drugs and targeted therapy of infectious diseases and physiological disorders. However, the in vivo application of aptamer-mediated biosensing and therapy in animals has been limited. This paper reviews the existing reports on the application of aptamer-based biosensors and targeted therapy in animals. It also dissects the various modifications to aptamers that were found to be successful in in vivo application of the aptamers in diagnostics and therapeutics. Finally, it also highlights major challenges and future directions in the application of aptamers in the field of veterinary medicine.

Application of selected biosensor techniques in clinical diagnostics

INTRODUCTION

Examination of disease biomarkers mostly performed on crude materials, such as serum, meets some obstacles, resulting from sample complexity and the wide range of concentrations and sizes of the components. Techniques currently used in clinical diagnostics are usually time-consuming and expensive. The more sensitive and portable devices are needed for early diagnostics. Chemical sensors are devices that convert chemical information into parameters suitable for fast and precise processing and measurement.

AREA COVERED

We review the use of biosensors and their possible application in early diagnostics of some diseases like cancer or viral infections. We focus on different types of biorecognition and some technical modifications, lowering the limit of detection potentially attractive to medical practitioners.

EXPERT OPINION

Among the new diagnostic strategies, the use of biosensors is of increasing interest. In these techniques, the capture ligand interacts with the analyte of interest. Measuring interactions between partners in real time by surface plasmon resonance yields valuable information about kinetics and affinity in a short time and without labels. Importantly, the tendency in such techniques is to make biosensor devices smaller and the test results apparent with the naked eye, so they can be used in point-of-care medicine.

Surface Plasmon Resonance (SPR)- and Localized SPR (LSPR)-Based Virus Sensing Systems: Optical Vibration of Nano- and Micro-Metallic Materials for the Development of Next-Generation Virus Detection Technology

The global damage that a widespread viral infection can cause is evident from the ongoing COVID-19 pandemic. The importance of virus detection to prevent the spread of viruses has been reaffirmed by the pandemic and the associated social and economic damage. Surface plasmon resonance (SPR) in microscale and localized SPR (LSPR) in nanoscale virus sensing systems are thought to be useful as next-generation detection methods. Many studies have been conducted on ultra-sensitive technologies, especially those based on signal amplification. In some cases, it has been reported that even a low viral load can be measured, indicating that the virus can be detected in patients even in the early stages of the viral infection. These findings corroborate that SPR and LSPR are effective in minimizing false-positives and false-negatives that are prevalent in the existing virus detection techniques. In this review, the methods and signal responses of SPR and LSPR-based virus detection technologies are summarized. Furthermore, this review surveys some of the recent developments reported and discusses the limitations of SPR and LSPR-based virus detection as the next-generation detection technologies.

Nano-layered surface plasmon resonance-based highly sensitive biosensor for virus detection: A theoretical approach to detect SARS-CoV-2

The outbreak of the coronavirus disease (COVID-19) pandemic has become a worldwide health catastrophe instigated by Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2). Countries are battling to slow the spread of this virus by testing and treating patients, along with other measures such as prohibiting large gatherings, maintaining social distance, and frequent, thorough hand washing, as no vaccines or medicines are available that could effectively treat infected people for different types of SARS-CoV-2 variants. However, the testing procedure to detect this virus is lengthy. This study proposes a surface plasmon resonance-based biosensor for fast detection of SARS-CoV-2. The sensor employs a multilayered configuration consisting of TiO₂-Ag-MoSe₂ graphene with a BK7 prism. Antigen-antibody interaction was considered the principle for this virus detection. Immobilized CR3022 antibody molecules for detecting SARS-CoV-2 antigens (S-glycoprotein) are used for this sensor. It was found that the proposed sensor's sensitivity (194°/RIU), quality factor (54.0390 RIU^-1), and detection accuracy (0.2702) outperformed those of other single and multilayered structures. This study could be used as a theoretical base and primary step in constructing an actual sensor.

Aptamers for Anti-Viral Therapeutics and Diagnostics

Viral infections cause a host of fatal diseases and seriously affect every form of life from bacteria to humans. Although most viral infections can receive appropriate treatment thereby limiting damage to life and livelihood with modern medicine and early diagnosis, new types of viral infections are continuously emerging that need to be properly and timely treated. As time is the most important factor in the progress of many deadly viral diseases, early detection becomes of paramount importance for effective treatment. Aptamers are small oligonucleotide molecules made by the systematic evolution of ligands by exponential enrichment (SELEX). Aptamers are characterized by being able to specifically bind to a target, much like antibodies. However, unlike antibodies, aptamers are easily synthesized, modified, and are able to target a wider range of substances, including proteins and carbohydrates. With these advantages in mind, many studies on aptamer-based viral diagnosis and treatments are currently in progress. The use of aptamers for viral diagnosis requires a system that recognizes the binding of viral molecules to aptamers in samples of blood, serum, plasma, or in virus-infected cells. From a therapeutic perspective, aptamers target viral particles or host cell receptors to prevent the interaction between the virus and host cells or target intracellular viral proteins to interrupt the life cycle of the virus within infected cells. In this paper, we review recent attempts to use aptamers for the diagnosis and treatment of various viral infections.

Advances in airborne microorganisms detection using biosensors: A critical review

Humanity has been facing the threat of a variety of infectious diseases. Airborne microorganisms can cause airborne infectious diseases, which spread rapidly and extensively, causing huge losses to human society on a global scale. In recent years, the detection technology for airborne microorganisms has developed rapidly; it can be roughly divided into biochemical, immune, and molecular technologies. However, these technologies still have some shortcomings; they are time-consuming and have low sensitivity and poor stability. Most of them need to be used in the ideal environment of a laboratory, which limits their applications. A biosensor is a device that converts biological signals into detectable signals. As an interdisciplinary field, biosensors have successfully introduced a variety of technologies for bio-detection. Given their fast analysis speed, high sensitivity, good portability, strong specificity, and low cost, biosensors have been widely used in environmental monitoring, medical research, food and agricultural safety, military medicine and other fields. In recent years, the performance of biosensors has greatly improved, becoming a promising technology for airborne microorganism detection. This review introduces the detection principle of biosensors from the three aspects of component identification, energy conversion principle, and signal amplification. It also summarizes its research and application in airborne microorganism detection. The new progress and future development trend of the biosensor detection of airborne microorganisms are analyzed.

Selection and applications of functional nucleic acids for infectious disease detection and prevention

Infectious diseases caused by pathogenic microorganisms such as viruses and bacteria pose a great threat to human health. Although a significant progress has been obtained in the diagnosis and prevention of infectious diseases, it still remains challenging to develop rapid and cost-effective detection approaches and overcome the side effects of therapeutic agents and pathogen resistance. Functional nucleic acids (FNAs), especially the most widely used aptamers and DNAzymes, hold the advantages of high stability and flexible design, which make them ideal molecular recognition tools for bacteria and viruses, as well as potential therapeutic drugs for infectious diseases. This review summarizes important advances in the selection and detection of bacterial- and virus-associated FNAs, along with their potential prevention ability of infectious disease in recent years. Finally, the challenges and future development directions are concluded.

Optical technologies for the detection of viruses like COVID-19: Progress and prospects

The outbreak of life-threatening pandemic like COVID-19 necessitated the development of novel, rapid and cost-effective techniques that facilitate detection of viruses like SARS-CoV-2. The presently popular approach of a collection of samples using the nasopharyngeal swab method and subsequent detection of RNA using the real-time polymerase chain reaction suffers from false-positive results and a longer diagnostic time scale. Alternatively, various optical techniques namely optical sensing, spectroscopy, and imaging shows a great promise in virus detection. Herein, a comprehensive review of the various photonics technologies employed for virus detection, particularly the SARS-CoV family, is discussed. The state-of-art research activities in utilizing the photonics tools such as near-infrared spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy, fluorescence-based techniques, super-resolution microscopy, surface plasmon resonance-based detection, for virus detection accounted extensively with an emphasis on coronavirus detection. Further, an account of emerging photonics technologies of SARS-CoV-2 detection and future possibilities is also explained. The progress in the field of optical techniques for virus detection unambiguously show a great promise in the development of rapid photonics-based devices for COVID-19 detection.

Biosensors for the detection of respiratory viruses: A review

The recent events of outbreaks related to different respiratory viruses in the past few years, exponentiated by the pandemic caused by the coronavirus disease 2019 (COVID-19), reported worldwide caused by SARS-CoV-2, raised a concern and increased the search for more information on viruses-based diseases. The detection of the virus with high specificity and sensitivity plays an important role for an accurate diagnosis. Despite the many efforts to identify the SARS-CoV-2, the diagnosis still relays on expensive and time-consuming analysis. A fast and reliable alternative is the use of low-cost biosensor for in loco detection. This review gathers important contributions in the biosensor area regarding the most current respiratory viruses, presents the advances in the assembly of the devices and figures of merit. All information is useful for further biosensor development for the detection of respiratory viruses, such as for the new coronavirus.

Nanobiosensors for the Detection of Novel Coronavirus 2019-nCoV and Other Pandemic/Epidemic Respiratory Viruses: A Review

The coronavirus disease 2019 (COVID-19) pandemic is considered a public health emergency of international concern. The 2019 novel coronavirus (2019-nCoV) or severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that caused this pandemic has spread rapidly to over 200 countries, and has drastically affected public health and the economies of states at unprecedented levels. In this context, efforts around the world are focusing on solving this problem in several directions of research, by: (i) exploring the origin and evolution of the phylogeny of the SARS-CoV-2 viral genome; (ii) developing nanobiosensors that could be highly effective in detecting the new coronavirus; (iii) finding effective treatments for COVID-19; and (iv) working on vaccine development. In this paper, an overview of the progress made in the development of nanobiosensors for the detection of human coronaviruses (SARS-CoV, SARS-CoV-2, and Middle East respiratory syndrome coronavirus (MERS-CoV) is presented, along with specific techniques for modifying the surface of nanobiosensors. The newest detection methods of the influenza virus responsible for acute respiratory syndrome were compared with conventional methods, highlighting the newest trends in diagnostics, applications, and challenges of SARS-CoV-2 (COVID-19 causative virus) nanobiosensors.

The research of aptamer biosensor technologies for detection of microorganism

The activities and transmissions of microorganisms are closely related to human, and all kinds of diseases caused by pathogenic microorganisms have attracted attention in the world and brought many challenges to human health and public health. The traditional microbial detection technologies have characteristics of longer detection cycle and complicated processes, therefore, which can no longer meet the detection requirements in the field of public health. At present, it is the focus to develop and design a novel, rapid, and simple microbial detection method in the field of public health. Herein, this article summarized the development of aptamer biosensor technologies for detection of microorganism in the aspect of bacteria, viruses, and toxins in detail, including optical aptamer sensors such as fluorometry and colorimetry, electrochemical aptamer sensors, and other technologies combined with aptamer. KEY POINTS: • Aptamer biosensor is a good platform for microbial detection. • Aptamer biosensors include optical sensors and electrochemical sensors. • Aptamer sensors have been widely used in the detection of bacteria, viruses, and other microorganisms.

How Nanophotonic Label-Free Biosensors Can Contribute to Rapid and Massive Diagnostics of Respiratory Virus Infections: COVID-19 Case

The global sanitary crisis caused by the emergence of the respiratory virus SARS-CoV-2 and the COVID-19 outbreak has revealed the urgent need for rapid, accurate, and affordable diagnostic tests to broadly and massively monitor the population in order to properly manage and control the spread of the pandemic. Current diagnostic techniques essentially rely on polymerase chain reaction (PCR) tests, which provide the required sensitivity and specificity. However, its relatively long time-to-result, including sample transport to a specialized laboratory, delays massive detection. Rapid lateral flow tests (both antigen and serological tests) are a remarkable alternative for rapid point-of-care diagnostics, but they exhibit critical limitations as they do not always achieve the required sensitivity for reliable diagnostics and surveillance. Next-generation diagnostic tools capable of overcoming all the above limitations are in demand, and optical biosensors are an excellent option to surpass such critical issues. Label-free nanophotonic biosensors offer high sensitivity and operational robustness with an enormous potential for integration in compact autonomous devices to be delivered out-of-the-lab at the point-of-care (POC). Taking the current COVID-19 pandemic as a critical case scenario, we provide an overview of the diagnostic techniques for respiratory viruses and analyze how nanophotonic biosensors can contribute to improving such diagnostics. We review the ongoing published work using this biosensor technology for intact virus detection, nucleic acid detection or serological tests, and the key factors for bringing nanophotonic POC biosensors to accurate and effective COVID-19 diagnosis on the short term.

Engineering photonics solutions for COVID-19

As the impact of COVID-19 on society became apparent, the engineering and scientific community recognized the need for innovative solutions. Two potential roadmaps emerged: developing short-term solutions to address the immediate needs of the healthcare communities and developing mid/long-term solutions to eliminate the over-arching threat. However, in a truly global effort, researchers from all backgrounds came together in tackling this challenge. Short-term efforts have focused on re-purposing existing technologies and leveraging additive manufacturing techniques to address shortages in personal protective equipment and disinfection. More basic research efforts with mid-term and long-term impact have emphasized developing novel diagnostics and accelerating vaccines. As a foundational technology, photonics has contributed directly and indirectly to all efforts. This perspective will provide an overview of the critical role that the photonics field has played in efforts to combat the immediate COVID-19 pandemic as well as how the photonics community could anticipate contributing to future pandemics of this nature.

Potential Diagnostic Systems for Coronavirus Detection: a Critical Review

Abstract

Currently there are no effective anti-viral drugs for SARS-CoV-2, so the primary line of defense is to detect infected cases as soon as possible. The high rate of contagion for this virus and the highly nonspecific symptoms of the disease (Coronovirus disease 2019, (Covid-19)) that it causes, such as respiratory symptoms, cough, dyspnea, fever, and viral pneumonia, require the urgent establishment of precise and fast diagnostic tests to verify suspected cases, screen patients, and conduct virus surveillance. Nowadays, several virus detection methods are available for viral diseases, which act on specific properties of each virus or virus family, therefore, further investigations and trials are needed to find a highly efficient and accurate detection method to detect and prevent the outcomes of the disease. Hence, there is an urgent need for more and precise studies in this field. In this review, we discussed the properties of a new generation of coronaviruses (SARS-CoV-2) following routine virus detection methods and proposed new strategies and the use of potential samples for SARS-CoV-2 detection.

Graphical Abstract

Convenient Construction of Orthogonal Dual Aptamer-Based Plasmonic Immunosandwich Assay for Probing Protein Disease Markers in Complex Samples and Living Animals

Aptamers, because of their outstanding merits including simple synthesis and easy modification, have been widely used as antibody alternatives to construct novel immunosandwich assays. Dual aptamer-based sandwich assays exhibit multiple advantages over conventional immunosandwich assays and single aptamer-based sandwich assays. However, their construction is hampered by the limited knowledge of binding orthogonality of aptamers reported in the literature. Herein, we present a new strategy for conveniently constructing an orthogonal dual aptamer-based plasmonic immunosandwich assay (odA-PISA) for probing proteins in complex samples and living animals. An orthogonal aptamer pair was first efficiently selected from the aptamers reported in the literature by affinity capillary electrophoresis. Then, a target protein-capturing gold thin-layer-coated probe and silver nanoparticle-based Raman labeling nanotags were conveniently prepared with the selected aptamers and used to construct the assay. The double aptamers used ensured the specificity, whereas the plasmonic coupling effect between the target-capturing probe and the generated Raman nanotags significantly enhanced the Raman signal intensity, providing high sensitivity. As a proof of principle, alkaline phosphatase (ALP) was used as the target. The constructed odA-PISA exhibited high specificity and high sensitivity toward ALP, giving cross-reactivity ≤ 4.2% and the limit of detection of 3.8 pM (S/N = 4). The quantitative determination of ALP in human serum and probing ALP in tumor-bearing mice were achieved, showing the great application potential of the method. This strategy is widely applicable to other protein disease markers. Therefore, it opened a new access to the construction of sensitive dual aptamer-based sandwich assays for real-world applications, particularly disease diagnosis.

Aptamer-Based Field-Effect Transistor for Detection of Avian Influenza Virus in Chicken Serum

Early diagnosis of the highly pathogenic H5N1 avian influenza virus (AIV) is significant for preventing and controlling a global pandemic. However, there is no existing electrical biosensor for detecting biomarkers for AIV in clinically relevant samples such as chicken serum. Herein, we report the first use of an aptamer-functionalized field-effect transistor (FET) as a label-free sensor for AIV detection in chicken serum. A DNA aptamer is employed as a sensitive and selective receptor for hemagglutinin (HA) protein, which is a biomarker for AIVs. This aptamer is immobilized on a gold microelectrode that is connected to the gate of a reusable FET transducer. The specific binding of the target protein results in a change in the surface potential, which generates a signal response of the FET transducer. We hypothesize that a conformational change in the DNA aptamer upon specific binding of HA protein may alter the surface potential. The signal of the aptamer-based FET biosensor increased linearly with the increase in the logarithm of HA protein concentration in a dynamic range of 10 pM to 10 nM with a detection limit of 5.9 pM. The selectivity of the biosensor for HA protein was confirmed by employing relevant interfering proteins. The proposed biosensor was successfully applied to the selective detection of HA protein in a chicken serum sample. Owing to its simple and low-cost architecture, portability, and sensitivity, the aptamer-based FET biosensor has potential as a point-of-care diagnosis of H5N1 AIVs in clinical samples.

A structure-free digital microfluidic platform for detection of influenza a virus by using magnetic beads and electromagnetic forces

H1N1, a subtype of influenza A virus, has emerged as a global threat in the past decades. Due to its highly infectious nature, an accurate and rapid detection assay is urgently required. Therefore, this study presents a new type of digital microfluidic platform for H1N1 virus detection by utilizing a one-aptamer/two-antibodies assay on magnetic beads. The droplets containing magnetic beads were driven by electromagnetic forces on a structure-free, super-hydrophobic surface to automate the entire assay within 40 min. With different levels of hydrophobic modification, the droplets could be easily controlled and positioned without any assisted microstructure. The tunable electromagnetic forces could be adjusted for three kinds of operating modes for the manipulations of beads and droplets, including movement of droplets containing magnetic beads, mixing of two droplets and beads extraction out of droplets. When compared with previous studies, the manipulations of droplets and magnetic particles in this study are more flexible as they can be easily adjusted by fine-tuning the magnetic flux density. Furthermore, the magnetic beads also served as three-dimensional substrates for the new enzyme-linked immunosorbent assay (ELISA)-like assay. The magnetic beads were conjugated with aptamers, which have high specificity towards H1N1 viruses such that they could be specifically captured and detected. The horseradish peroxidase-conjugated secondary antibody was then used to activate tyramide-tetramethylrhodamine (TTMR) such that fluorescent signals could be amplified. With this approach, the limit of detection was experimentally found to be 0.032 hemagglutination units/reaction, which is sensitive enough for clinical diagnostics. This kind of digital microfluidic platform with the ELISA-like assay could effectively reduce the consumption of samples and reagents such that the volume of all droplets including the H1N1 sample, antibodies, TTMR and wash buffers was only 20 μL. This is the first time that a digital microfluidic platform was demonstrated such that the entire diagnostic process for influenza A H1N1 viruses could be performed by using electromagnetic forces, which could be promising for rapid and accurate diagnosis of influenza.

A fluorescent lateral flow biosensor for the quantitative detection of Vaspin using upconverting nanoparticles

Vaspin is a protein present in human serum that can cause type-2 diabetes, obesity, and other cardiovascular diseases. We report fluorescent upconverting nanoparticles (UCNPs)-based lateral flow biosensor for ultrasensitive detection of Vaspin. A pair (primary and secondary) of cognate aptamers was used that has duo binding with Vaspin. UCNPs with a diameter of around 100 nm were used as a tag to label a detection probe (secondary aptamer). A primary aptamer (capture probe) was immobilized on the test zone. Sandwich type hybridization reactions among the conjugate probe, target Vaspin, and primary aptamer were performed on the lateral flow biosensor. In the presence of target Vaspin, UCNPs were captured on the test zone of the biosensor and the fluorescent intensity of the captured UCNPs was measured through a colorimetric app under NIR. Fluorescence intensity indicates the quantity of Vaspin present in the sample. A range of Vaspin concentration across 0.1-55 ng ml^-1 with a Limit of detection (LOD) 39 pg ml^-1 was tested through this UCNPs based LFSA with high sensitivity, reproducibility and repeatability, whereas it's actual range in human blood is from 0.1 to 7 ng ml^-1. Therefore, this research provides a well-suited lateral flow strip with an ultrasensitive and low-cost approach for the early diagnosis of type-2 diabetes and this could be applied to any targets with a duo of aptamers generated.

Application of Aptamers in Virus Detection and Antiviral Therapy

Viral infections can cause serious diseases for humans and animals. Accurate and early detection of viruses is often crucial for clinical diagnosis and therapy. Aptamers are mostly single-stranded nucleotide sequences that are artificially synthesized by an in vitro technology known as the Systematic Evolution of Ligands by Exponential Enrichment (SELEX). Similar to antibodies, aptamers bind specifically to their targets. However, compared with antibody, aptamers are easy to synthesize and modify and can bind to a broad range of targets. Thus, aptamers are promising for detecting viruses and treating viral infections. In this review, we briefly introduce aptamer-based biosensors (aptasensors) and describe their applications in rapid detection of viruses and as antiviral agents in treating infections. We summarize available data about the use of aptamers to detect and inhibit viruses. Furthermore, for the first time, we list aptamers specific to different viruses that have been screened out but have not yet been used for detecting viruses or treating viral infections. Finally, we analyze barriers and developing perspectives in the application of aptamer-based virus detection and therapeutics.

Label-free localized surface plasmon resonance biosensor composed of multi-functional DNA 3 way junction on hollow Au spike-like nanoparticles (HAuSN) for avian influenza virus detection

In the present study, we fabricated a label-free avian influenza (AIV H5N1) detection biosensor composed of a multi-functional DNA 3 way-Junction (3 W J) on a hollow Au spike-like nanoparticle (hAuSN) using a localized surface plasmon resonance (LSPR) method. To construct the multi-functional DNA (MF-DNA) as a bioprobe, the 3 W J was introduced. The proposed AIV detection bioprobe should contain three functionalities: target recognition, signal amplification, and connection to substrate. To achieve this goal, each piece of the DNA 3 W J was tailored to a hemagglutinin (HA) binding aptamer, FAM dye and thiol group, respectively. The assembly of each DNA 3 W J functional fragment was then confirmed by TBM-Native PAGE. Moreover, the hAuSN was immobilized on the indium-tin-oxide (ITO) substrate for LSPR measurement. The DNA 3 W J was immobilized onto the hAuSN electrode through the thiol-group of DNA 3 W J. The fabricated DNA 3 W J/hAuSN heterolayer on the ITO substrate was investigated by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). LSPR experiments were conducted to confirm HA protein binding to the DNA 3 W J/ hAuSN -modified electrode. The proposed biosensor can detected the HA protein in PBS buffer (LOD: 1 pM) as well as in the diluted chicken serum (LOD: 1 pM). The present study details a label-free, simple fabrication method consisted of DNA 3 W J/ hAuSN heterolayer that uses easy-to-tailor elements to detect not only AIV but also various viruses detection platform easily.

Sandwich-type aptasensor employing modified aptamers and enzyme-DNA binding protein conjugates

The use of aptamers in various analytical applications as molecular recognition elements and alternative to antibodies has led to the development of various platforms that facilitate the sensitive and specific detection of targets ranging from small molecules and proteins to whole cells. The goal of this work was to design a universal and adaptable sandwich-type aptasensor exploiting the unique properties of DNA binding proteins. Specifically, two different enzyme-DNA binding protein conjugates, GOx-dHP and HRP-scCro, were used for the direct detection of a protein using two aptamers for target capture and detection. The specific dsDNA binding sequence for each DNA binding protein tag was incorporated in the form of a hairpin at one end of each aptamer sequence during the synthesis step. Detection was accomplished by an enzymatic (GOx/HRP) cascade reaction after the binding of each enzyme conjugate to its corresponding binding sequence on each aptamer. The proposed sandwich-type aptasensor was validated for the detection of thrombin, which is one of the most commonly used model targets with known dual aptamers. The limit of detection accomplished was 0.92 nM which is comparable with other colorimetric platforms reported in the literature. The sensitivity of the aptasensor was easily modulated by changing the number of dsDNA binding sites incorporated in the aptamer sequences, thus controlling the enzyme stoichiometry. Finally, the potential use of the proposed sensing approach for real sample testing was demonstrated using spiked human plasma and no significant matrix effects were observed when up to 2% plasma was used.

Specific detection of avian influenza H5N2 whole virus particles on lateral flow strips using a pair of sandwich-type aptamers

We report a selection of a cognate pair of aptamers for whole avian influenza virus particles of H5N2 by using graphene-oxide based systemic evolution of ligands by exponential enrichment (GO-SELEX), and the application of a pair of sandwich-type binding aptamers on the lateral flow strips. The aptamers were characterized by GO-FRET assay, and Kd values of the selected aptamers were estimated to be from 6.913 × 10⁵ to 1.27 × 10⁶ EID₅₀/ml (EID₅₀/ml: 50% egg infective dose). Based on the evidence from confocal laser scanning microscope (CLSM), surface plasmon resonance (SPR), and circular dichroism (CD) spectrum analysis, the aptamers, J₃APT and JH₄APT, were found to be working as a cognate pair that binds to the target virus at the different sites simultaneously. This cognate pair of aptamers then was successfully applied on the lateral flow strips, clearly showing sandwich-type binding images with the presence of the certain numbers of H5N2 virus particles. On the newly developed lateral flow strips, the target virus was detectable down to 6 × 10⁵ EID₅₀/ml in the buffer and 1.2 × 10⁶ EID₅₀/ml in the duck's feces, respectively, by the naked eye. By using the ImageJ software, the LOD was found to be 1.27 × 10⁵ EID₅₀/ml in the buffer and 2.09 × 10⁵ EID₅₀/ml in the duck's feces, respectively. Interestingly, on the lateral flow strips, enhanced specificity towards the target virus (H5N2) appeared over other subtypes of H5Nx. To the best of our knowledge, this is the first report about the application of the cognate pair of aptamers for the detection of influenza virus on the lateral flow strips. This study shows the promising perspective of a cognate pair of aptamers for the on-site detection system which could be useful for rapid detection of avian influenza viruses for preventing the pandemic influenza viruses from spreading.

Electrostatic assembly of gold nanoparticles on black phosphorus nanosheets for electrochemical aptasensing of patulin

An aptamer based impedimetric assay for the mycotoxin patulin (PAT) is described. A glassy carbon electrode (GCE) was modified with black phosphorus nanosheets (BP NSs) and modified with PAT aptamer by electrostatic attraction. Detection is based on the variations of electron transfer resistance at the modified electrode surface. This assay can detect PAT over a linear range that extends from 1.0 nM to 1.0 μM with a 0.3 nM detection limit. To improve the performance of the sensor, the BP NS-GCE was further modified with gold nanoparticles and then with thiolated PAT aptamer. This modified electrode, operated at an applied potential of 0.18 V (vs. Ag/AgCl), has a wider linear range (0.1 nM to 10.0 μM) and a lower detection limits (0.03 nM). Both assays were successfully applied to the analysis of (spiked) genuine food samples. Graphical abstract Black phosphorus nanosheets (BP NSs) were used to fabricate an aptamer based assay for patulin. To further improve the performance of the electrode, gold nanoparticles (AuNP) were placed on the surface of black phosphorus nanosheets (AuNP-BP NSs) by electrostatic attraction for patulin aptasensing.

Subtyping of influenza A H1N1 virus using a label-free electrochemical biosensor based on the DNA aptamer targeting the stem region of HA protein

Rapid subtyping of influenza viruses in clinical laboratories has been increasingly important because three subtypes (seasonal H1N1, H3N2, and 2009 H1N1) of influenza A virus currently disseminated in humans have variable susceptibilities to antiviral drug. Herein, we present DNA aptamers for selective detection of influenza A H1N1 (seasonal and 2009 pandemic H1N1) viruses by targeting recombinant influenza A mini-hemagglutinin (mini-HA) protein (the stable stem region of HA) and whole H1N1 viruses. The dissociation constants (K_D) of aptamer candidates V46 and V57 were 19.2 nM and 29.6 nM, respectively, according to electrochemical characterization (differential pulse voltammetry), demonstrating strong binding to mini-HA. In comparison, the K_D of the influenza virus antibodies is in the range of 1 μM-10 nM. Aptamer V46 showed higher specificity and binding affinity to the mini-HA protein and H1N1 subtypes, and it was also incorporated into an indium tin oxide-based electrochemical sensor, showing sensitive and specific detection of H1N1 viruses, with a limit of detection (LOD) of 3.7 plaque-forming units per mL. The binding affinity, specificity, and LOD achieved with the electrochemical sensor suggest that it can be used for rapid subtyping of H1N1. We also propose that this aptamer can be used for the neutralization of H1N1 subtypes, suggesting potential therapeutic and diagnostic applications.

Electrochemical aptasensor for ampicillin detection based on the protective effect of aptamer-antibiotic conjugate towards DpnII and Exo III digestion

A simple and sensitive electrochemical method was developed for ampicillin detection based on the protective effect of aptamer-antibiotic conjugate towards endonuclease DpnII activity. Without ampicillin, DNA aptamer firstly hybridizes with the capture probe to form double strand DNA (dsDNA) structure. Then, dsDNA is cleaved by DpnII restriction endonuclease to form two dsDNA fragments. In which, one fragment is released from electrode surface and the other fragment is kept on electrode surface. Then, the dsDNA fragment kept on electrode surface is further digested by Exo III, which leads to the release of the dsDNA fragment from electrode surface. Thus, the electrochemical signal increases due to the decrease of the interface electron transfer resistance causing by the release of dsDNA from electrode surface. However, the formation of dsDNA is blocked when forming aptamer-ampicillin conjugate, which makes the obstruction of the digestion of DpnII and Exo III towards capture probe. Thus, a weak electrochemical signal is achieved due to the increase of the interface electron transfer resistance causing by the dsDNA on the electrode surface. Based on the relationship between ampicillin concentration and the decrease of the electrochemical signal, antibiotic is detected with low detection limit of 32 pM under optimal conditions, which is lower than the mandated maximum residue limit of European Union (9.93 nM). The developed method also presents good detection selectivity. Moreover, the applicability is confirmed by detecting antibiotic in milk and water samples with satisfactory results.