Rapid and sensitive detection of bisphenol a from serum matrix

Covalent Organic Framework Packed Nanoporous Membrane for Continuous Removal of Bisphenol A from Agricultural Irrigation Wastewater

BPA, a typical endocrine disruptor, poses a significant threat to the growth of crops and thereby jeopardizes sustainable agriculture products and human health. In this work, a water-stabilized imine covalent organic framework (TpBD-COF) packed nanochannel membrane was constructed. The TpBD-COF membrane achieves high selective removal of BPA attributed to the subdivision of the pores by the filled COF, which further reduces the porous size and effectively eliminates the distance barrier between the selective sites of TpBD-COF membranes and BPA. The selective removal ratio of BPA was 5.79 times higher than that of the bare membrane, while the removal capacity reached 6.78 nM cm-2 min-1. It can eliminate BPA from irrigation wastewater and ensure crop growth. The application of COF-filled nanoporous membrane provides not only a size-matching strategy for the development of specific continuous removal of BPA but also a theoretical reference for membrane removal of other organic pollutants in agricultural irrigation water environment.

An Overview of Aptamer-Based Sensor Platforms for the Detection of Bisphenol-A

Endocrine disruptive compounds are natural or anthropogenic environmental micropollutants that alter the function of the endocrine system ultimately damaging the metabolism. Bisphenol A (BPA) is the most common of these pollutants and it is often used in epoxy coatings and polycarbonates as a plasticizer. Therefore, monitoring BPA levels in different environments is very important and challenging. In recent years, an increasing number of BPA detection methods have been proposed. This article presents a critical review of aptamer-based electrochemical, fluorescence-based, colorimetric, and several other BPA detection platforms published in the last decade. Furthermore, a statistical evaluation has been made using principle component analysis showing analytical performance parameters do not create very different clusters. Comparisons to other BPA detection methods are also presented so that the reader has an overall literature overview.

Hepatic toxicity prediction of bisphenol analogs by machine learning strategy

Toxicological studies have demonstrated the hepatic toxicity of several bisphenol analogs (BPs), a prevalent type of endocrine disruptor. The development of Adverse Outcome Pathway (AOP) has substantially contributed to the rapid risk assessment for human health. However, the lack of in vitro and in vivo data for the emerging BPs has limited the hazard assessment of these synthetic chemicals. Here, we aimed to develop a new strategy to rapidly predict BPs' hepatotoxicity using network analysis coupled with machine learning models. Considering the structural and functional similarities shared by BPs with Bisphenol A (BPA), we first integrated hepatic disease related genes from multiple databases into BPA-Gene-Phenotype-hepatic toxicity network and subjected it to the computational AOP (cAOP). Through cAOP network and conventional machine learning approaches, we scored the hepatotoxicity of 20 emerging BPs and provided new insights into how BPs' structure features contributed to biologic functions with limited experimental data. Additionally, we assessed the interactions between emerging BPs and ESR1 using molecular docking and proposed an AOP framework wherein ESR1 was a molecular initiating event. Overall, our study provides a computational approach to predict the hepatotoxicity of emerging BPs.

Advances of aptamer-based small-molecules sensors in body fluids detection

The field of aptamer-based sensing has evolved considerably over the past three decades. The aptamer sensor-based detection of small-molecule targets in body fluids is designed for real-time or rapid, low-cost, non- or minimally invasive tracking and diagnosis of human health status. It can be achieved by specifically monitoring biomarkers or metabolites excreted from various body fluids, including blood, urine, cerebrospinal fluid, saliva, ect. This article reviews a comprehensive collection of aptamer-based sensors for detecting small-molecule in various body fluids. A comparative analysis of aptamer features, emerging chemistry, advanced sensing materials, transduction techniques, and detection performance is conducted, and the strengths and pitfalls of each approach are discussed. Finally, the development process and application challenges of aptamer-based sensors in the detection of small-molecule in body fluids are presented and discussed.

ACEK Biosensor for the Minute-Scale Quantification of Breast Cancer ctDNA

Circulating tumor DNA (ctDNA) appears as a valuable liquid biopsy biomarker in the early diagnosis, treatment, and prognosis of cancer. Here, a biosensing method derived from the AC electrokinetics (ACEK) effect was constructed in this study for the simple, efficient, and rapid method of detection of ctDNA. In the proof-of-concept experiment, ctDNA from the PIK3CA E542K mutant in breast cancer was quantified by detecting a normalized capacitance change rate using a forked-finger gold electrode as the sensing electrode in combination with the ACEK effect. We compared two formats for the construction of the approach by employing varied immobilization strategies; one is to immobilize the DNA capture probe on the electrode surface by Au-S bonding, while the other immobilizes the probe on a self-assembled membrane on the electrode surface by amide bonding. Both formats demonstrated ultrafast detection speed by completing the ctDNA quantification within 1 min and a linear range of 10 fM-10 pM was observed. Meanwhile, the immobilization via the self-assembled membrane yielded improved stability, sensitivity, and specificity than its Au-S bonding counterpart. A detection limit of 1.94 fM was eventually achieved using the optimized approach. This research provides a label-free and minute-scale universal method for the detection of various malignant tumors. The ctDNA biosensors based on the ACEK effect improved according to the probe type or electrode structure and have potential applications in tumor drug efficacy prediction, drug resistance monitoring, screening of high-risk groups, differential diagnosis, monitoring of tiny residual lesions, and prognosis determination.

A review on immunomodulatory effects of BPA analogues

Bisphenol A (BPA) is a known endocrine disruptor found in many consumer products that humans come into contact with on a daily basis. Due to increasing concerns about the safety of BPA and the introduction of new legislation restricting its use, industry has responded by adopting new, less studied BPA analogues that have similar polymer-forming properties. Some BPA analogues have already been shown to exhibit effects similar to BPA, for example, contributing to endocrine disruption through agonistic or antagonistic behaviour at various nuclear receptors such as estrogen (ER), androgen (AR), glucocorticoid (GR), aryl hydrocarbon (AhR), and pregnane X receptor (PXR). Since the European Food Safety Authority (EFSA) issued a draft re-evaluation of BPA and drastically reduced the temporary tolerable daily intake (t-TDI) of BPA from 4 mg/kg body weight/day to 0.2 ng/kg body weight/day due to increasing concern about the toxic properties of BPA, including its potential to disrupt immune system processes, we conducted a comprehensive review of the immunomodulatory activity of environmentally abundant BPA analogues. The results of the review suggest that BPA analogues may affect both the innate and acquired immune systems and can contribute to various immune-mediated conditions such as hypersensitivity reactions, allergies, and disruption of the human microbiome.

Challenges in the Analytical Preparation of a Biological Matrix in Analyses of Endocrine-Disrupting Bisphenols

Endocrine-disrupting chemicals (EDCs) are xenobiotics presented in a variety of everyday products that may disrupt the normal activity of hormones. Exposure to bisphenol A as EDC at trace and ultra-trace levels is associated with adverse health effects, and children are recognized as the most vulnerable group to EDCs exposure. In this review, a summary is presented of up-to-date sample preparation methods and instrumental techniques applied for the detection and quantification of bisphenol A and its structural analogues in various biological matrices. Biological matrices such as blood, cell-free blood products, urine, saliva, breast milk, cordial blood, amniotic and semen fluids, as well as sweat and hair, are very complex; therefore, the detection and later quantification of bisphenols at low levels present a real analytical challenge. The most popular analytical approaches include gas and liquid chromatography coupled with mass spectrometry, and their enhanced reliability and sensitivity finally allow the separation and detection of bisphenols in biological samples, even as ultra-traces. Liquid/liquid extraction (LLE) and solid-phase extraction (SPE) are still the most common methods for their extraction from biological matrices. However, many modern and environmentally safe microextraction techniques are currently under development. The complexity of biological matrices and low concentrations of analytes are the main issues for the limited identification, as well as understanding the adverse health effects caused by chronical and ubiquitous exposure to bisphenols and its analogues.

Aptamer-functionalized capacitive biosensors

The growing use of aptamers as target recognition elements in label-free biosensing necessitates corresponding transducers that can be used in relevant environments. While popular in many fields, capacitive sensors have seen relatively little, but growing use in conjunction with aptamers for sensing diverse targets. Few reports have shown physiologically relevant sensitivity in laboratory conditions and a cohesive picture on how target capture modifies the measured capacitance has been lacking. In this review, we assess the current state of the field in three areas: small molecule, protein, and cell sensing. We critically analyze the proposed hypotheses on how aptamer-target capture modifies the capacitance, as many mechanistic postulations appear to conflict between published works. As the field matures, we encourage future works to investigate individual aptamer-target interactions and to interrogate the physical mechanisms leading to measured changes in capacitance. To this point, we provide recommendations on best practices for developing aptasensors with a particular focus on considerations for biosensing in clinical settings.

Bifunctional photoelectrochemical aptasensor based on heterostructured Ag3PO4/Ag/TiO2 nanorod array for determination of two tumor markers

Constructing of heterostructures can significantly improve the photoelectrical (PEC) response signal by promoting the migration and suppressing the recombination of photogenerated carries. A bifunctional PEC sensing platform was designed for simultaneous high-performance detection of mucin-1 (MUC1) and carcinoembryonic antigen (CEA), which was based on generated Z-scheme heterostructured Ag₃PO₄/Ag/TiO₂ nanorod arrays (NAs) and enzyme-mediated catalytic precipitation by alkaline phosphatase (ALP) and Au/hollow Co₃O₄ polyhedron. The proposed aptasensor displayed linear ranges of 1.0-100 ng mL^-1 and 0.1-50 ng mL^-1 for MUC1 and CEA with limit of detections of 0.430 and 0.058 ng mL^-1, respectively. This strategy offers potential applications for early diagnosis, monitoring progression, and even evaluating the prognosis of breast cancer in practice.

Facile synthesis of novel multifunctional β-cyclodextrin microporous organic network and application in efficient removal of bisphenol A from water

Here, a novel multifunctional β-cyclodextrin microporous organic network (CD-MON) has been successfully synthesized and used to remove bisphenol A (BPA) from water. The morphology and composition of the synthesized CD-MON were confirmed. The combination of hydrophobic interaction, π-π interaction inclusion mechanism and hydrogen bonding endowed CD-MON to exhibit superior adsorption capacity toward BPA. The adsorption kinetics and isotherms of BPA and other four model aromatic pollutants on CD-MON were studied. CD-MON could maintain adsorption efficiency toward BPA over wide pH ranges and without being affected by the ionic strengths, co-existing inorganic ions and humic acid. The optimal conditions and removal efficiency of BPA were screened by response surface analysis. In addition, nearly unchanged in the adsorption efficiency toward BPA was observed after five regeneration cycles on CD-MON. CD-MON can adsorb about 80% of five model aromatic pollutants from the water within 40 s in the flow-through experiments. This novel adsorbent gives great promise for practical wastewater remediation.

Optimization of ACEK-enhanced, PCB-based biosensor for highly sensitive and rapid detection of bisphenol a in low resource settings

In this study, we developed a low-cost and easy-to-use capacitive biosensor employing printed-circuit-board (PCB)-based technique for electrode fabrication and a specific alternative current (AC) signal for AC Electrokinetics (ACEK) effect excitation. Fast, accurate, and highly sensitive detection and quantification of bisphenol A (BPA) was achieved. An easy characterization of the biofunctionalization process is introduced by measuring interfacial capacitance which is simple and superior to most of methods currently in use. The frequency and amplitude of the AC signal used for capacitive interrogation were optimized to achieve maximum interfacial capacitance and maximum sensitivity. To evaluate the performance of the developed biosensor, its operation was compared with in-house microfabricated and commercially available electrodes. The limit-of-detection (LOD) obtained using the PCB-based electrodes was found to be at least one order of magnitude lower than that obtained with the commercial and in-house microfabricated electrodes. The linear range for BPA detection was wide from 1 fM to 10 pM with an LOD of 109.5 aM and sample to result in 20s. The biosensor operation was validated by spike-and-recovery tests of BPA using commercial food samples. Thus, the platform has a potential as an on-site detection of bisphenol A in low-resource settings.

A Sensitive and Specific Genomic RNA Sensor for Point-of-Care Screening of Zika Virus from Serum

This work presents a sensitive and specific single-step RNA sensor for Zika virus (ZIKV) in serum. Using AC electrokinetics (ACEK)-enhanced capacitive sensing technology, ZIKV genomic RNA (gRNA) can be directly detected from serum. The sensors are interdigitated electrodes modified with oligonucleotide probes complementary to the conserved regions of ZIKV gRNA. The ACEK capacitive sensing applies an optimized AC excitation signal over the sensor, which induces ACEK microfluidic enrichment of analytes and also simultaneously performs real-time monitoring of hybridization of ZIKV gRNA on the sensor surface. Hence, the sensing procedures are simple with rapid turn-around time and good specificity and sensitivity. A series of experiments are conducted to optimize the sensor performance. The performance of the sensor is investigated for three different probes, two functionalization buffers, and different hybridization buffers. With the optimized sensing protocol, this method can detect spiked ZIKV gRNA from human serum within 30 s and reach a limit of detection of 78.8 copies/μL in analytical samples and as low as 287.5 copies/μL in neat serum. The sensors can successfully differentiate between the RNAs of the ZIKV and dengue virus, two viruses with similar transmission paths and symptoms. The sensor is simple to use and requires no labeling or sophisticated process typically involved in a polymerase chain reaction, hybridization chain reaction, or nucleic acid sequence-based amplification.

Rapid and Sensitive Detection of miRNA Based on AC Electrokinetic Capacitive Sensing for Point-of-Care Applications

A sensitive and efficient method for microRNAs (miRNAs) detection is strongly desired by clinicians and, in recent years, the search for such a method has drawn much attention. There has been significant interest in using miRNA as biomarkers for multiple diseases and conditions in clinical diagnostics. Presently, most miRNA detection methods suffer from drawbacks, e.g., low sensitivity, long assay time, expensive equipment, trained personnel, or unsuitability for point-of-care. New methodologies are needed to overcome these limitations to allow rapid, sensitive, low-cost, easy-to-use, and portable methods for miRNA detection at the point of care. In this work, to overcome these shortcomings, we integrated capacitive sensing and alternating current electrokinetic effects to detect specific miRNA-16b molecules, as a model, with the limit of detection reaching 1.0 femto molar (fM) levels. The specificity of the sensor was verified by testing miRNA-25, which has the same length as miRNA-16b. The sensor we developed demonstrated significant improvements in sensitivity, response time and cost over other miRNA detection methods, and has application potential at point-of-care.

Flexible online in-droplet cell/synthetic particle concentration utilizing alternating current electrothermal-flow field-effect transistor

Cell/particle concentration inside droplets holds great potential in extending lab-in-a-droplet applications, typically ranging from biological and chemical assays. Herein, we present a universal, massive and versatile technique, namely, alternating current electrothermal-flow field-effect transistor (ACET-FFET) to accomplish in-droplet cell/synthetic particle concentration on demand. Three parallel planar electrodes are utilized to generate an artificially reorderable electric field inside droplets by tuning the gate voltage through field-effect control, which results in a reshapable ACET-based microvortices pattern for in-droplet concentration. A downstream Y-shaped junction promotes the mother droplet splitting into two daughter droplets containing highly and poorly concentrated cells/particles, respectively. Fluorescent polystyrene (PS) nanoparticles are used to characterize the variations of ACET-microvortices flow pattern formation within droplets. Moreover, the concentration performance is demonstrated using PS microparticles and Neurospora crassa cells. We show that particles/cells can flexibly accumulate into any daughter droplet or be equally concentrated in both daughter droplets by conveniently regulating the gate voltage. The highly concentrated cells at the entrance of the concentrator show an instantaneous response performance to the external electric field. Further, online simultaneous particle synthesis and concentration inside droplets are proposed and implemented for the first time, demonstrated by efficient in-droplet micromixing and Prussian blue (PB) reaction. The accompanying synthetic PB particles are highly concentrated into either daughter droplet, thereby extending the versatility of the platform. The presented in-droplet concentration strategy, together with its unique features of simple geometric configuration, facile operation and broad applicability can broaden utility in droplet microfluidics.

Sorption and leaching behaviors between aged MPs and BPA in water: The role of BPA binding modes within plastic matrix

Due to the hydrophobicity and large specific surface area microplastics (MPs) have become the vector for the migration of environmental organic pollutants. Environmental aging process affects the physiochemical structure of MPs and their corresponding environmental behaviors, in which the effect of bisphenol A (BPA) binding mode within plastic matrix on aging behaviors of MPs is not reported. In this work, the structural properties and BPA sorption behaviors of low density polyethylene (LDPE) MPs with BPA additives and polycarbonate (PC) MPs with BPA monomers exposed to three types of artificial accelerated aging processes including UV/H₂O, UV/H₂O₂, and UV/Cl₂ systems were comparatively investigated. Virgin LDPE and PC exhibited obvious leakage of BPA additives or monomers. Aged LDPE had stronger sorption ability towards BPA in water environment with no observed leakage of BPA additives. While, aged PC had extremely high leakage of BPA monomers, which is similar to virgin PCs and was proved to be a persistent source of BPA release. The BPA sorption on aged LDPE or leaching from aged PC was influenced by aging processes, water pH, salinity, co-existing estradiol (E2), and water sources. This study reveals the potential ecological and environmental risks of MPs containing toxic additives/monomers during aging processes from a new perspective.

Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A

A molecularly imprinted paper-based analytical device (MIP-μPAD) was developed for the sensing of bisphenol A (BPA). The platform was screen-printed onto a filter paper support, where the electrodes and the fluorescence μPADs were designed. Owing to its dual electrochemical and fluorescence responses, molecularly imprinted curcumin nanoparticles were used to sense BPA. The μPAD design was characterized by transmission electron microscopy, scanning electron microscopy, fluorescence spectroscopy, and electrochemical techniques. The sensor design comprised a wide linear range from 1 to 200 μg L^-1 with limits of detection of 0.47 ± 0.2 and 0.62 ± 0.3 μg L^-1 (LOD, S/N = 3) for electrochemical and fluorescence sensing, respectively. Furthermore, the system showed good analytical performance such as selectivity, stability, and reproducibility. The feasibility of the MIP-μPAD was demonstrated for the sensing of BPA in seawater, foods, and polycarbonate plastic packaged water with recovery values of 97.2 and 101.8%.

Bioanalytical methodologies for clinical investigation of endocrine-disrupting chemicals: a comprehensive update

Endocrine-disrupting chemicals (EDCs) are xenobiotics that disrupt the endocrine system in humans at ecologically significant concentrations. Various substances are exposed to human health via routes including food, water, air and skin that result in disastrous maladies at low doses as well. Therefore EDCs need a meticulous strategy of analysis for dependable and consistent monitoring in humans. The management and risk assessment necessitate advancements in the detection methodologies of EDCs. Hyphenated MS-based chromatograph and other validated laboratory analysis methods are widely available and employed. Besides, in vitro bioassay techniques and biosensors are also used to conduct accurate toxicological tests. This article provides a revision of various bioanalytical detection methods and technologies for the clinical estimation of EDCs.

Competitive plasmonic biomimetic enzyme-linked immunosorbent assay for sensitive detection of bisphenol A

A plasmonic biomimetic enzyme-linked immunosorbent assay (PBELISA) method was developed for ultrasensitive and on-site visual detection of bisphenol A (BPA). The PBELISA was an enzyme-linked immunoassay using molecularly imprinted polymer (MIP) film as biomimetic antibody combined with catalase (CAT)-mediated growth of plasmonic gold nanoparticles (AuNPs). With the BPA concentration increased, a distinguished color change was observed from colorless to blue and then red. Therefore, the proposed method could be employed with naked-eye observation to detect BPA with visual limit of detection (LOD) of 40 pg/mL. For quantitative analysis, this method also exhibited a good dynamic linear response to the logarithmic BPA concentrations ranged from 10 pg/mL to 1.024 × 10⁴ pg/mL with a correlation coefficient of R² = 0.9922 and LOD of 6.20 pg/mL. The recovery rates in tap water, milk and orange juice ranged from 91.83% to 107.39%. In brief, the developed PBELISA method is sensitive, cost-effective and easy-to-use for BPA detection.

A Fast and Highly Selective Nitrite Sensor Based on Interdigital Electrodes Modified With Nanogold Film and Chrome-Black T

Nitrite is a toxic substance, when excessive nitrite enters the human body, it will be seriously harmful to human. At present, the detection methods of nitrite are complicated to operate and require expensive detection instruments. Therefore, an effective, fast and highly selective nanogold film interdigital electrode sensors that can detect nitrite easily and quickly is developed in the work. Firstly, the variation of the sensitivity of nanogold film nitrite sensors with concentrations (1 mol/L, 10⁻¹ mol/L, 10⁻² mol/L, 10⁻³ mol/L, 10⁻⁴ mol/L, and 10⁻⁵ mol/L) was measured by experiments. Then, Chrome-black T was modified to the surface of the nanogold film interdigital electrodes by electrochemical polymerization, and the film of chrome-black T had affinity for nitrite ions, so nitrite ions were enriched on the sensor surface. The change law of the impedance signal of the modified nanogold film nitrite sensors after being added to different concentrations of sodium nitrite solution were also concluded. The study demonstrates that the larger the concentration of sodium nitrite solution is added to the modified interdigital electrodes, the smaller impedance and resistance of the modified interdigital electrodes are reflected. Finally, specificity of the modified interdigital electrode sensors has been demonstrated. The novel interdigital electrode sensors can detect the concentration of nitrite solution conveniently and quickly with only 30 s. Therefore, the prospect of applying the novel nanogold film interdigital electrode sensors to the detection of nitrite in blood, body fluid, food and drinking water is promising.

Rapid and Sensitive Detection of Bisphenol A Based on Self-Assembly

Bisphenol A (BPA) is an endocrine disruptor that may lead to reproductive disorder, heart disease, and diabetes. Infants and young children are likely to be vulnerable to the effects of BPA. At present, the detection methods of BPA are complicated to operate and require expensive instruments. Therefore, it is quite vital to develop a simple, rapid, and highly sensitive method to detect BPA in different samples. In this study, we have designed a rapid and highly sensitive biosensor based on an effective self-assembled monolayer (SAM) and alternating current (AC) electrokinetics capacitive sensing method, which successfully detected BPA at nanomolar levels with only one minute. The developed biosensor demonstrates a detection of BPA ranging from 0.028 μg/mL to 280 μg/mL with a limit of detection (LOD) down to 0.028 μg/mL in the samples. The developed biosensor exhibited great potential as a portable BPA biosensor, and further development of this biosensor may also be useful in the detection of other small biochemical molecules.

An interdigitated microelectrode based aptasensor for real-time and ultratrace detection of four organophosphorus pesticides

With increasing industrialization of food production, residues of organophosphorus pesticides (OPs) are more frequently found in the environment including rivers, lakes and soils. Extended exposure to OPs, even at a level below 1 nM, may lead to liver and central nervous system damages in humans and animals, while existing detection methods are not sensitive enough to detect OPs at trace levels. We presented a simple-to-use aptasensor to rapidly detect broad-spectrum OPs with high sensitivity. DNA aptamer was modified on the surface of a micro interdigitated electrode chip, and AC electrokinetics was employed to accelerate the binding of OP molecules to the aptamer probe. The sensing strategy directly measured the interfacial capacitance whose change rate was adopted as a quantitative indicator of recognition events, with a sample to result detection time of 30 s. This aptasensor had a wide linear range of (fM ~ nM), and the detection limit reached (0.24-1.67) fM for four highly-toxic OPs, with good specificity. It still showed good activity after being stored in non-refrigerated environment for at least 14 days. This aptasensor as well as the detection method offer a promising solution for on-site and real-time sensitive OP detection.

Simple, Fast And Highly Sensitive Detection Of Gram-Negative Bacteria By A Novel Electrical Biosensor

This work presents a rapid, low-cost, highly sensitive and specific capacitive sensor for detection of Gram negative bacteria in a field setting. Recognition of Gramnegative bacteria is based on specific detection of lipopolysaccharides (LPS) by LPS-specific aptamer probe immobilized on electrode sensors. An inhomogeneous AC electric field is applied on sensor electrodes and induces positive dielectrophoresis that attracts LPS particles to the sensor electrodes for rapid detection. The same AC signal is also used to detect the binding reactions occurred on the sensor surface. The AC signal was optimized, and the binding between LPS and the specific aptamer was demonstrated. The detection limit reaches as low as 4.9 fg/mL for free LPS molecules and 53 #/mL of bacteria within a 30s' response time, meeting the needs of onsite bacteria detection.

Critical Review: DNA Aptasensors, Are They Ready for Monitoring Organic Pollutants in Natural and Treated Water Sources?

There is a growing need to monitor anthropogenic organic contaminants detected in water sources. DNA aptamers are synthetic single-stranded oligonucleotides, selected to bind to target contaminants with favorable selectivity and sensitivity. These aptamers can be functionalized and are used with a variety of sensing platforms to develop sensors, or aptasensors. In this critical review, we (1) identify the state-of-the-art in DNA aptamer selection, (2) evaluate target and aptamer properties that make for sensitive and selective binding and sensing, (3) determine strengths and weaknesses of alternative sensing platforms, and (4) assess the potential for aptasensors to quantify environmentally relevant concentrations of organic contaminants in water. Among a suite of target and aptamer properties, binding affinity is either directly (e.g., organic carbon partition coefficient) or inversely (e.g., polar surface area) correlated to properties that indicate greater target hydrophobicity results in the strongest binding aptamers, and binding affinity is correlated to aptasensor limits of detection. Electrochemical-based aptasensors show the greatest sensitivity, which is similar to ELISA-based methods. Only a handful of aptasensors can detect organic pollutants at environmentally relevant concentrations, and interference from structurally similar analogs commonly present in natural waters is a yet-to-be overcome challenge. These findings lead to recommendations to improve aptasensor performance.

Rapid, highly sensitive detection of Gram-negative bacteria with lipopolysaccharide based disposable aptasensor

Gram-negative bacteria are one of the most common microorganisms in the environment. Their differential detection and recognition from Gram-positive bacteria has been attracting much attention over the years. Using Escherichia coli (E. coli) as a model, we demonstrated on-site detection of Gram-negative bacteria by an AC electrokinetics-based capacitive sensing method using commercial microelectrodes functionalized with an aptamer specific to lipopolysaccharides. Dielectrophoresis effect was utilized to enrich viable bacteria to the microelectrodes rapidly, achieving a detection limit of 10² cells/mL within a 30 s' response time. The sensor showed a negligible response to Staphylococcus aureus (S. aureus), a Gram-positive species. The developed sensor showed significant advantages in sensitivity, selectivity, cost, operation simplicity, and response time. Therefore, this sensing method has shown great application potential for environmental monitoring, food safety, and real-time diagnosis.

Occurrence of bisphenol S in the environment and implications for human exposure: A short review

As a substitute of bisphenol A (BPA), bisphenol S (BPS) has been applied in consumer products present in our daily lives. With a similar chemical structure as BPA, BPS has also been demonstrated as an exogenous endocrine disrupting chemical. Compared with a large number of studies on BPA, investigation on BPS has remained limited. In this study, we reviewed the literature of BPS mainly published during 2010-2017, including its environmental distributions, toxicities, and human exposure. The data demonstrated that BPS is now ubiquitous in the environment and found worldwide, but generally with concentration levels lower than BPA in various environment media, including water, sediment, sludge, indoor dust and air, consumer products, and human urine. However, we found that the concentration levels of BPS in aquatic environments, especially water samples, were almost comparable or equal to that of BPA. Our summary also indicated that process speed of substituting BPA with BPS in consumer products in the U.S. was relatively faster than other countries. In addition, we summarized the toxicities of exposure to BPS both in vivo and in vitro experiments. The current data supports that exposure to BPS may have adverse effects on reproductive systems, endocrine systems, and nervous systems in animals and humans, and may trigger oxidative stress. The occurrence of BPS was frequently reported in human urine, but rarely in other human samples. The current research indicates that food is the dominant source for human exposure to BPS, and the contribution of personal care product usage is low. The occurrence of BPS and their metabolites in the human body and the guidelines for BPS exposure merit further investigation.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.

Extraction and detection of bisphenol A in human serum and urine by aptamer-functionalized magnetic nanoparticles

A new type of magnetic nanoparticles (MNPs), as the absorbents of bisphenol A (BPA), was prepared by functionalization of Fe₃O₄@SiO₂ with BPA-specific aptamer in this work. ssDNA aptamer was immobilized on the Fe₃O₄@SiO₂ surface through biotin-avidin interactions, playing a role of the specific probe for BPA. The resultant materials (Apt-MNPs) exhibited outstanding magnetic responsibility and can be separated efficiently by the magnetic field. Experimental results also showed that Apt-MNPs had large adsorption capacity and high competitive selectivity for the targeted compound BPA. Furthermore, Apt-MNPs were adopted as the specific absorbents to extract and enrich BPA from human serum and urine samples. Therefore, an efficient detection method of BPA was developed in combination with high-performance liquid chromatography (HPLC). The linearity of the method was over a range of 5-10,000 ng mL^-1 with a correlation coefficient of 0.99997, and the limit of detections (LODs) for serum and urine were 2.0 and 1.0 ng mL^-1, respectively. The recoveries of BPA in the spiked human serum and urine samples were 90.8 ± 7.3% (RSD) and 92.3 ± 1.5%, respectively. Our results demonstrated that Apt-MNPs were high-performance adsorbents for extracting and enriching BPA, resulting in fast and efficient detection of BPA in serum and urine samples. Graphical abstract Aptamer-MNPs were effective for BPA separation from serum and urine.

Environment matters: microglia function and dysfunction in a changing world

The immune system is our interface with the environment, and immune molecules such as cytokines and chemokines and the cells that produce them within the brain, notably microglia, are critical for normal brain development. This recognition has in recent years led to the working hypothesis that inflammatory events during pregnancy or the early postnatal period, for example, in response to infection, may disrupt the normal developmental trajectory of microglia and consequently their interactions with neurons, thereby contributing to the risk for neurological disorders. The current article outlines recent findings on the impact of diverse, pervasive environmental challenges, beyond infection, including air pollution and maternal stress; and their impact on microglial development and its broad implications for neural pathologies.

Beyond infection - Maternal immune activation by environmental factors, microglial development, and relevance for autism spectrum disorders

Immune molecules such as cytokines and chemokines and the cells that produce them within the brain, notably microglia, are critical for normal brain development. This recognition has in recent years led to the working hypothesis that inflammatory events during pregnancy, e.g. in response to infection, may disrupt the normal expression of immune molecules during critical stages of neural development and thereby contribute to the risk for neurodevelopmental disorders such as autism spectrum disorder (ASD). This hypothesis has in large part been shepherded by the work of Dr. Paul Patterson and colleagues, which has elegantly demonstrated that a single viral infection or injection of a viral mimetic to pregnant mice significantly and persistently impacts offspring immune and nervous system function, changes that underlie ASD-like behavioral dysfunction including social and communication deficits. Subsequent studies by many labs - in humans and in non-human animal models - have supported the hypothesis that ongoing disrupted immune molecule expression and/or neuroinflammation contributes to at least a significant subset of ASD. The heterogeneous clinical and biological phenotypes observed in ASD strongly suggest that in genetically susceptible individuals, environmental risk factors combine or synergize to create a tipping or threshold point for dysfunction. Importantly, animal studies showing a link between maternal immune activation (MIA) and ASD-like outcomes in offspring involve different species and diverse environmental factors associated with ASD in humans, beyond infection, including toxin exposures, maternal stress, and maternal obesity, all of which impact inflammatory or immune pathways. The goal of this review is to highlight the broader implications of Dr. Patterson's work for the field of autism, with a focus on the impact that MIA by diverse environmental factors has on fetal brain development, immune system development, and the pathophysiology of ASD.

Small-Molecule Dengue Virus Co-imprinting and Its Application as an Electrochemical Sensor

Polymers can be synthesized to recognize small molecules. This is achieved by introducing the target molecule during monomer self-assembly, where they can be incorporated during cross-linking polymerization. Following additional pre-processing, the material obtained can then be applied as a sensing layer for these molecules in many applications. The sensitivity of the polymers depends on the "active sites" imprinted on the surface. Increasing the number of active sites on the polymers surface can be achieved by using nanoparticles as a platform to support and concentrate the molecules for imprinting. In this work, we report the first use of dengue virus as a supporting nanoparticle to make for a more effective polymer composite sensor for the detection of bisphenol A (BPA), which is an environmental contaminant. The dengue virus has a nanoparticle size of around 100 nm and its surface provides regions where lipids and hydrophobic compounds can bind, making it an ideal support. The mixing of BPA with dengue prior to monomer self-assembly led to imprinted polymer surfaces with much higher density BPA binding sites and a limit of detection of 0.1 pm. We demonstrate that a BPA-dengue co-imprinting polymer composite sensor shows a very high sensitivity for BPA, but with lower production costs and technical requirements than other comparable methods.