In-droplet cell concentration using dielectrophoresis

Micro elastofluidics for tuneable droplet splitting

Droplet microfluidics is a transformative technology for generating and manipulating droplets in an immiscible carrier fluid. This technology spans many application areas, including biomedicine, food and beverage processing, as well as material synthesis. Droplet splitting is a key task in droplet microfluidics, which is essential for metering fluid samples between multiple assays in lab-on-a-chip applications. Passive droplet splitting with a T-junction is a straightforward and simple method. However, achieving variable droplet sizes typically requires numerous devices with different channel dimensions and complex channel arrangements. To address this limitation, we proposed a fully flexible and stretchable microfluidic technology for tunable droplet splitting. By externally stretching the T-junction, the dimensions of the channel arms can be dynamically altered in real time, allowing precise control over daughter droplet volumes and ratios. We investigated the effects of stretching on channel dimensions, hydraulic resistance, and droplet-splitting behaviour by theoretical analysis, numerical modelling, and experimental evaluations. The results revealed symmetric splitting at zero stretching and a tunable daughter droplet volume ratio up to approximately 4 with up to 4 mm device stretching (∼16% strain). Furthermore, we demonstrated the suitability of this technology for particle sorting, where particle-encapsulating mother droplets were asymmetrically split by adjusting device stretching. Finally, we demonstrated the encapsulation of microalgae within mother droplets and the tuning of microalgae concentration in the daughter droplets with stretching. This innovative approach provides a versatile and straightforward method for tunable droplet splitting, offering real-time control over droplet sizes without complex or multiple microfluidic designs. This advancement in micro elastofluidic technology opens up new possibilities for high-throughput and customisable droplet-based assays.

The use of droplet-based microfluidic technologies for accelerated selection of Yarrowia lipolytica and Phaffia rhodozyma yeast mutants

Microorganisms are widely used for the industrial production of various valuable products, such as pharmaceuticals, food and beverages, biofuels, enzymes, amino acids, vaccines, etc. Research is constantly carried out to improve their properties, mainly to increase their productivity and efficiency and reduce the cost of the processes. The selection of microorganisms with improved qualities takes a lot of time and resources (both human and material); therefore, this process itself needs optimization. In the last two decades, microfluidics technology appeared in bioengineering, which allows for manipulating small particles (from tens of microns to nanometre scale) in the flow of liquid in microchannels. The technology is based on small-volume objects (microdroplets from nano to femtolitres), which are manipulated using a microchip. The chip is made of an optically transparent inert to liquid medium material and contains a series of channels of small size (<1 mm) of certain geometry. Based on the physical and chemical properties of microparticles (like size, weight, optical density, dielectric constant, etc.), they are separated using microsensors. The idea of accelerated selection of microorganisms is the application of microfluidic technologies to separate mutants with improved qualities after mutagenesis. This article discusses the possible application and practical implementation of microfluidic separation of mutants, including yeasts like Yarrowia lipolytica and Phaffia rhodozyma after chemical mutagenesis will be discussed.

Yield stress-enabled microencapsulation of field responsive microparticle suspensions

Try and encapsulate microparticles inside the cores of microcapsules and you will often find that particles adhere to the liquid-liquid interface in a phenomenon known as Pickering stabilization. Particles will remain irreversibly trapped and embedded within the subsequently formed microcapsule membrane. In cases where the encapsulant particles must remain suspended inside the microcapsule core to retain their desired properties or behaviours, Pickering stabilization is detrimental. Here we demonstrate a general procedure using yield stress materials as the core material, where the yield stress of the gel is strong enough to suspend particles against sedimentation, but weak enough to allow spatial manipulation of encapsulant particles using an external field. This external field imparts enough force on particles to disrupt the supporting network and allow particle mobility after encapsulation.

Design of a Low-Frequency Dielectrophoresis-Based Arc Microfluidic Chip for Multigroup Cell Sorting

Dielectrophoresis technology is applied to microfluidic chips to achieve microscopic control of cells. Currently, microfluidic chips based on dielectrophoresis have certain limitations in terms of cell sorting species, in order to explore a microfluidic chip with excellent performance and high versatility. In this paper, we designed a microfluidic chip that can be used for continuous cell sorting, with the structural design of a curved channel and curved double side electrodes. CM factors were calculated for eight human healthy blood cells and cancerous cells using the software MyDEP, the simulation of various blood cells sorting and the simulation of the joule heat effect of the microfluidic chip were completed using the software COMSOL Multiphysics. The effect of voltage and inlet flow velocity on the simulation results was discussed using the control variables method. We found feasible parameters from simulation results under different voltages and inlet flow velocities, and the feasibility of the design was verified from multiple perspectives by measuring cell movement trajectories, cell recovery rate and separation purity. This paper provides a universal method for cell, particle and even protein sorting.

Dual-Wave Acoustofluidic Centrifuge for Ultrafast Concentration of Nanoparticles and Extracellular Vesicles

Extracellular vesicles (EVs) are secreted nanostructures that play various roles in critical cancer processes. They operate as an intercellular communication system, transferring complex sets of biomolecules from cell to cell. The concentration of EVs is difficult to decipher, and there is an unmet technological need for improved (faster, simpler, and gentler) approaches to isolate EVs from complex matrices. Herein, an acoustofluidic concentration of extracellular vesicles (ACEV) is presented, based on a thin-film printed circuit board with interdigital electrodes mounted on a piezoelectric substrate. An angle of 120° is identified between the electrodes and the reference flat of the piezoelectric substrate for simultaneous generation of Rayleigh and shear horizontal waves. The dual waves create a complex acoustic field in a droplet, resulting in effective concentration of nanoparticles and EVs. The ACEV is able to concentrate 20 nm nanospheres within 105 s and four EV dilutions derived from the human prostate cancer (Du145) cell line in approximately 30 s. Cryo-electron microscopy confirmed the preservation of EV integrity. The ACEV device holds great potential to revolutionize investigations of EVs. Its faster, simpler, and gentler approach to EV isolation and concentration can save time and effort in phenotypic and functional studies of EVs.

High-throughput microfluidic droplets in biomolecular analytical system: A review

Droplet microfluidic technology has revolutionized biomolecular analytical research, as it has the capability to reserve the genotype-to-phenotype linkage and assist for revealing the heterogeneity. Massive and uniform picolitre droplets feature dividing solution to the level that single cell and single molecule in each droplet can be visualized, barcoded, and analyzed. Then, the droplet assays can unfold intensive genomic data, offer high sensitivity, and screen and sort from a large number of combinations or phenotypes. Based on these unique advantages, this review focuses on up-to-date research concerning diverse screening applications utilizing droplet microfluidic technology. The emerging progress of droplet microfluidic technology is first introduced, including efficient and scaling-up in droplets encapsulation, and prevalent batch operations. Then the new implementations of droplet-based digital detection assays and single-cell muti-omics sequencing are briefly examined, along with related applications such as drug susceptibility testing, multiplexing for cancer subtype identification, interactions of virus-to-host, and multimodal and spatiotemporal analysis. Meanwhile, we specialize in droplet-based large-scale combinational screening regarding desired phenotypes, with an emphasis on sorting for immune cells, antibodies, enzymatic properties, and proteins produced by directed evolution methods. Finally, some challenges, deployment and future perspective of droplet microfluidics technology in practice are also discussed.

Tutorial on Lateral Dielectrophoretic Manipulations in Microfluidic Systems

Microfluidic lab-on-a-chip systems can offer cost- and time-efficient biological assays by providing high-throughput analysis at very small volume scale. Among these extremely broad ranges of assays, accurate and specific cell and reagent control is considered one of the most important functions. Dielectrophoretic (DEP)-based manipulation technologies have been extensively developed for these purposes due to their label-free and high selectivity natures as well as due to their simple microstructures. Here, we provide a tutorial on how to develop DEP-based microfluidic systems, including a detailed walkthrough of dielectrophoresis theory, instruction on how to conduct simulation and calculation of electric field and generated DEP force, followed with guidance on microfabricating two forms of DEP microfluidic systems, namely lateral DEP and droplet DEP, and how best to conduct experiments in such systems. Finally, we summarize most recent DEP-based microfluidic technologies and applications, including systems for blood diagnoses, pathogenicity studies, in-droplet content manipulations, droplet manipulations and merging, to name a few. We conclude by suggesting possible future directions on how DEP-based technologies can be utilized to overcome current challenges and improve the current status in microfluidic lab-on-a-chip systems.

FIDELITY: A quality control system for droplet microfluidics

Droplet microfluidic systems have been widely deployed to interrogate biological and chemical systems. The major limitations of these systems are the relatively high error rates from critical droplet manipulation functions. To address these limitations, we describe the development of FIDELITY (Flotation and Interdigitated electrode forces on Droplets to Enable Lasting system IntegriTY), a highly sensitive and accurate size-based droplet bandpass filter that leverages the natural buoyancy of aqueous droplets and highly localized dielectrophoretic force generated by interdigitated electrode arrays. Droplet manipulation accuracies greater than 99% were achieved at a throughput of up to 100 droplets/s and separation of droplets that differed in diameter by only 6 μm was demonstrated. Last, the utility of FIDELITY was demonstrated in a droplet size quality control application and also in a droplet-based in vitro transcription/translation workflow. We anticipate FIDELITY to be integrated into a broad range of droplet microfluidic configurations to achieve exceptional operational accuracy.

Measurement of dielectric properties of cells at single-cell resolution using electrorotation

Dielectric properties of a cell are biophysical properties of high interest for various applications. However, measuring these properties accurately is not easy, which can be exemplified by the large variations in reported dielectric properties of the same cell types. This paper presents a method for measuring the dielectric properties of cells at high frequency, especially lipid-producing microalgae, at single-cell resolution, by integrating an electrorotation-based dielectric property measurement method with a negative dielectrophoretic (nDEP) force-based single-cell trapping method into a single device. In this method, a four-electrode nDEP structure was used to trap a single cell in an elevated position in the center of another four-electrode structure that can apply electrorotational force. By measuring the speed of cell rotation under different applied electrorotation frequencies and fitting the results into a theoretical core-shell cell model, the dielectric properties of cells, including membrane capacitance and cytoplasm conductivity, could be obtained. This system was applied to measure the dielectric properties of lipid-accumulating microalga Chlamydomonas reinhardtii strain Sta6 by applying an electrorotation signal of up to 100 MHz. By utilizing a broad frequency range and expanding the measurement spectra to a high frequency region, increased accuracy in fitting the dielectric parameters to a theoretical model was possible, especially the cytoplasm conductivity. The developed method can be used in various applications, such as screening microalgae based on their lipid production capabilities, separating cells of different dielectric properties, identifying different cell types, as well as conducting basic biophysical analyses of cellular properties.

Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets

Acoustic manipulation of microparticles and cells has attracted growing interest in biomedical applications. In particular, the use of acoustic waves to concentrate particles plays an important role in enhancing the detection process by biosensors. Here, we demonstrated microparticle concentration within sessile droplets placed on the hydrophobic surface using the flexural wave. The design benefits from streaming flow induced by the Lamb wave propagated in the glass waveguide to manipulate particles in the droplets. Microparticles will be concentrated at the central area of the droplet adhesion plane based on the balance among the streaming drag force, gravity, and buoyancy at the operating frequency. We experimentally demonstrated the concentration of particles of various sizes and tumor cells. Using numerical simulation, we predicted the acoustic pressure and streaming flow pattern within the droplet and characterized the underlying physical mechanisms for particle motion. The design is more suitable for micron-sized particle preparation, and it can be valuable for various biological, chemical, and medical applications.

Cell Washing and Solution Exchange in Droplet Microfluidic Systems

Water-in-oil emulsion droplet microfluidic systems have been extensively developed, and currently, almost all cell handling steps can be conducted in this format. An exception is the cell washing and solution exchange step, which is commonly utilized in many conventional cell assays. This paper presents an in-droplet cell washing and solution exchange technology that utilizes dielectrophoretic (DEP) force to move all cells to one side of a droplet, followed by asymmetrical splitting of the droplet to obtain a small daughter droplet that contains all or most of the cells, and then finally merges this cell-concentrated droplet with a new droplet that contains the desired solution. These sequential droplet manipulation steps were integrated into a single platform, where up to 88% of the original solution in the droplet could be exchanged with the new solution while keeping cell loss to less than 5%. Two application examples were demonstrated using the developed technology. In the first example, green microalga Chlamydomonas reinhardtii cells were manipulated using negative DEP force to exchange the regular culture medium with a nitrogen-limited medium to induce lipid production. In the second example, Salmonella enterica cells were manipulated using positive DEP force to replace fluorescent dye that models fluorescent cell stains that contribute to high background noise in fluorescence-based droplet content detection with fresh buffer solution, significantly improving the droplet content detection sensitivity. Since the cell washing step is one of the most frequently utilized steps in many cell biology assays, we expect that the developed technology can significantly broaden the type of assay that can be conducted in droplet microfluidic format.

Flexible online in-droplet cell/synthetic particle concentration utilizing alternating current electrothermal-flow field-effect transistor

Cell/particle concentration inside droplets holds great potential in extending lab-in-a-droplet applications, typically ranging from biological and chemical assays. Herein, we present a universal, massive and versatile technique, namely, alternating current electrothermal-flow field-effect transistor (ACET-FFET) to accomplish in-droplet cell/synthetic particle concentration on demand. Three parallel planar electrodes are utilized to generate an artificially reorderable electric field inside droplets by tuning the gate voltage through field-effect control, which results in a reshapable ACET-based microvortices pattern for in-droplet concentration. A downstream Y-shaped junction promotes the mother droplet splitting into two daughter droplets containing highly and poorly concentrated cells/particles, respectively. Fluorescent polystyrene (PS) nanoparticles are used to characterize the variations of ACET-microvortices flow pattern formation within droplets. Moreover, the concentration performance is demonstrated using PS microparticles and Neurospora crassa cells. We show that particles/cells can flexibly accumulate into any daughter droplet or be equally concentrated in both daughter droplets by conveniently regulating the gate voltage. The highly concentrated cells at the entrance of the concentrator show an instantaneous response performance to the external electric field. Further, online simultaneous particle synthesis and concentration inside droplets are proposed and implemented for the first time, demonstrated by efficient in-droplet micromixing and Prussian blue (PB) reaction. The accompanying synthetic PB particles are highly concentrated into either daughter droplet, thereby extending the versatility of the platform. The presented in-droplet concentration strategy, together with its unique features of simple geometric configuration, facile operation and broad applicability can broaden utility in droplet microfluidics.

A Prominent Cell Manipulation Technique in BioMEMS: Dielectrophoresis

BioMEMS, the biological and biomedical applications of micro-electro-mechanical systems (MEMS), has attracted considerable attention in recent years and has found widespread applications in disease detection, advanced diagnosis, therapy, drug delivery, implantable devices, and tissue engineering. One of the most essential and leading goals of the BioMEMS and biosensor technologies is to develop point-of-care (POC) testing systems to perform rapid prognostic or diagnostic tests at a patient site with high accuracy. Manipulation of particles in the analyte of interest is a vital task for POC and biosensor platforms. Dielectrophoresis (DEP), the induced movement of particles in a non-uniform electrical field due to polarization effects, is an accurate, fast, low-cost, and marker-free manipulation technique. It has been indicated as a promising method to characterize, isolate, transport, and trap various particles. The aim of this review is to provide fundamental theory and principles of DEP technique, to explain its importance for the BioMEMS and biosensor fields with detailed references to readers, and to identify and exemplify the application areas in biosensors and POC devices. Finally, the challenges faced in DEP-based systems and the future prospects are discussed.

Manipulation of single cells inside nanoliter water droplets using acoustic forces

Droplet microfluidics enables high-throughput screening of single cells and is particularly valuable for applications, where the secreted compounds are analyzed. Typically, optical methods are employed for analysis, which are limited in their applicability as labeling protocols are required. Alternative label-free methods such as mass spectrometry would broaden the range of assays but are harmful to the cells, which is detrimental for some applications such as directed evolution. In this context, separation of cells from supernatant is beneficial prior to the analysis to retain viable cells. In this work, we propose an in-droplet separation method based on contactless and label-free acoustic particle manipulation. In a microfluidic chip, nanoliter droplets containing particles are produced at a T-junction. The particles are trapped in the tip of the droplet by the interplay of acoustic forces in two dimensions and internal flow fields. The droplets are subsequently split at a second T-junction into two daughter droplets-one containing the supernatant and the other containing the corresponding particles. The separation efficiency is measured in detail for polystyrene (PS) beads as a function of droplet speed, size, split ratio, and particle concentration. Further, single-bead (PS) and single-cell (yeast) experiments were carried out. At a throughput of 114 droplets/min, a separation efficiency of 100% ± 0% was achieved for more than 150 droplets. Finally, mammalian cells and bacteria were introduced into the system to test its versatility. This work demonstrates a robust, non-invasive strategy to perform single yeast cell-supernatant sampling in nanoliter volumes.

In-droplet cell separation based on bipolar dielectrophoretic response to facilitate cellular droplet assays

Precise manipulation of cells within water-in-oil emulsion droplets has the potential to vastly expand the type of cellular assays that can be conducted in droplet-based microfluidics systems. However, achieving such manipulation remains challenging. Here, we present an in-droplet label-free cell separation technology by utilizing different dielectrophoretic responses of two different cell types. Two pairs of angled planar electrodes were utilized to generate positive or negative dielectrophoretic force acting on each cell type, which results in selective in-droplet movement of only one specific cell type at a time. A downstream asymmetric Y-shaped microfluidic junction splits the mother droplet into two daughter droplets, each of which contains only one cell type. The capability of this platform was successfully demonstrated by conducting in-droplet separation from a mixture of Salmonella cells and macrophages, two cell types commonly used as a bacterial pathogenicity analysis model. This technology enable the precise manipulation of cells within droplets, which can be exploited as a critical function in implementing broader ranges of droplet-based microfluidics cellular assays.

Acoustofluidic multi-well plates for enrichment of micro/nano particles and cells

Controllable enrichment of micro/nanoscale objects plays a significant role in many biomedical and biochemical applications, such as increasing the detection sensitivity of assays, or improving the structures of bio-engineered tissues. However, few techniques can perform concentrations of micro/nano objects in multi-well plates, a very common laboratory vessel. In this work, we develop an acoustofluidic multi-well plate, which adopts an array of simple, low-cost and commercially available ring-shaped piezoelectric transducers for rapid and robust enrichment of micro/nanoscale particles/cells in each well of the plate. The enrichment mechanism is validated and characterized through both numerical simulations and experiments. We observe that the ring-shaped piezoelectric transducer can generate circular standing flexural waves in the substrate of each well, and that the vibrations can induce acoustic streaming near the interface between the substrate and a fluid droplet placed within the well; this streaming can drive micro/nanoscale objects to the center of the droplet for enrichment. Moreover, the acoustofluidic multi-well plate can realize simultaneous and consistent enrichment of biological cells in each well of the plate. With merits such as simplicity, controllability, low cost, and excellent compatibility with other downstream analysis tools, the developed acoustofluidic multi-well plate could be a versatile tool for many applications such as micro/nano fabrication, self-assembly, biomedical/biochemical sensing, and tissue engineering.

Quantum Dot Arrays Fabricated Using In Situ Photopolymerization of a Reactive Mesogen and Dielectrophoresis

Dielectrophoresis (DEP) is an excellent tool for manipulating small particles within a liquid or gas medium. However, when the size of the particles is too small, such as with quantum dots (QDs), it is difficult to manipulate the particles using DEP because the dielectrophoretic force (F_DEP) depends on the volume of the particles and is therefore too weak to achieve particle migration. Herein, we demonstrate a novel method for controlling nanoscale QD particles using DEP by introducing photopolymerized reactive mesogen (RM) bead vehicles. The size of an RM bead is well-controlled by the RM concentration in the medium, and when the size is approximately 0.2 μm or larger, the RM beads can be arbitrarily manipulated using DEP under moderate electric fields. Interestingly, during photopolymerization, QD particles are easily absorbed by polymerized RM beads and most of the QDs are embedded within the RM beads. Hence, we can fabricate periodic QD arrays by manipulating the RM beads containing such dots. In addition, we can fabricate multicolor QD arrays by repeating the processes using different QD particles. The shape of a DEP-assisted QD-RM network pattern can be precisely predicted by calculating the gradient of the square of the electric field (∇E²) and the corresponding F_DEP. This new technology may be useful for the fabrication of optical devices, displays, photonic crystal devices, and bioapplications.

Two Orders of Magnitude Boost in the Detection Limit of Droplet-Based Micro-Magnetofluidics with Planar Hall Effect Sensors

Magnetofluidics is a dynamic research field, which requires novel sensor solutions to boost the detection limit of tiny quantities of magnetized objects. Here, we present a sensing strategy relying on planar Hall effect sensors in droplet-based micro-magnetofluidics for the detection of a multiphase liquid flow, i.e., superparamagnetic aqueous droplets in an oil carrier phase. The high resolution of the sensor allows the detection of nanoliter-sized superparamagnetic droplets with a concentration of 0.58 mg/cm³, even when they are biased in a geomagnetic field only. The limit of detection can be boosted another order of magnitude, reaching 0.04 mg/cm³ (1.4 million particles in a single 100 nL droplet) when a magnetic field of 5 mT is applied to bias the droplets. With this performance, our sensing platform outperforms the state-of-the-art solutions in droplet-based micro-magnetofluidics by a factor of 100. This allows us to detect ferrofluid droplets in clinically and biologically relevant concentrations and even below without the need of externally applied magnetic fields. These results open the route for new strategies of the utilization of ferrofluids in microfluidic geometries in, e.g., bio(-chemical) or medical applications.

Concentrating Single Cells in Picoliter Droplets for Phospholipid Profiling on a Microfluidic System

Cellular membranes are composed of a variety of lipids in different amounts and proportions, and alterations of them are usually closely related to various diseases. To reveal the intercellular heterogeneity of the lipid variation, an integrated microfluidic system is designed, which consists of droplet-based inkjet printing, dielectrophoretic electrodes, and de-emulsification interface to achieve on-line single-cell encapsulation, manipulation, and mass spectrometry (MS) detection. This integrated system effectively improves the single-cell encapsulation rate, and meanwhile reduces the matrix interference and continuous oil phase interference to the MS detection. Using this system, the heterogeneities between the normal and cancer cells are compared, and the heterogeneity of the same cells before and after the drug treatment changed obviously, indicating that this system can be used as a promising tool for studying the link between the alterations of lipid homeostasis and various diseases.

Generation and manipulation of isotropic droplets in nematic medium using switchable dielectrophoresis

Dielectrophoresis (DEP) in a medium with anisotropic dielectric susceptibility is very different from typical DEP in an isotropic medium: The direction of particle actuation can be switched depending on the direction of the susceptibility tensor of the medium. However, the understanding of switchable DEP (SDEP) in an anisotropic medium is still in its infant stage. Here, we investigate SDEP using heat-generated isotropic droplets in a nematic liquid crystal (LC) medium. We demonstrate that the location of the generation of isotropic droplets can be partially controlled by controlling the temperature gradient within the LC cell using dielectric loss. The SDEP actuation of isotropic droplets is also highly dependent on the location of the isotropic droplets. Using this method, we fabricated different array patterns of isotropic and nematic phase separations under different applied signals.

Effects of surface treatments on trapping with DC insulator-based dielectrophoresis

A central challenge in measuring the biophysical properties of cells with electrokinetic approaches is the assignment of these biophysical properties to specific biological characteristics. Changes in the electrokinetic behavior of cells may come from mutations, altered gene expression levels, post-translation modifications, or environmental effects. Here we assess the electrokinetic behavior of chemically surface-modified bacterial cells in order to gain insight into the biophysical properties that are specifically affected by changes in surface chemistry. Using E. coli as a scaffold, an amine coupling reaction was used to covalently attach glycine, spermine, bovine serum albumin (protein), or 7-amino-4-methyl-3-coumarinylacetic acid (fluorescent dye) to the free carboxylic acid groups on the surface of the cells. These populations, along with unlabeled control cells, were subject to electrokinetic and dielectrophoretic measurements to quantify any changes in the biophysical properties upon alteration. The properties associated with each electrokinetic force are discussed relative to the specific reactant used. We conclude that relatively modest and superficial changes to cell surfaces can cause measurable changes in their biophysical properties.

The Effect of Oil Viscosity on Droplet Generation Rate and Droplet Size in a T-Junction Microfluidic Droplet Generator

There have been growing interests in droplet-based microfluidics due to its capability to outperform conventional biological assays by providing various advantages, such as precise handling of liquid/cell samples, fast reaction time, and extremely high-throughput analysis/screening. The droplet-based microfluidics utilizes the interaction between the interfacial tension and the fluidic shear force to break continuous fluids into uniform-sized segments within a microchannel. In this paper, the effect of different viscosities of carrier oil on water-in-oil emulsion, particularly how droplet size and droplet generation rate are affected, has been investigated using a commonly used T-junction microfluidic droplet generator design connected to a pressure-controlled pump. We have tested mineral oils with four different viscosities (5, 7, 10, and 15 cSt) to compare the droplet generation under five different flow pressure conditions (i.e., water flow pressure of 30-150 mbar and oil flow pressure of 40-200 mbar). The results showed that regardless of the flow pressure levels, the droplet size decreased as the oil viscosity increased. Average size of the droplets decreased by approximately 32% when the viscosity of the oil changed from 5 to 15 cSt at the flow pressure of 30 mbar for water and 40 mbar for oil. Interestingly, a similar trend was observed in the droplet generation rate. Droplet generation rate and the oil viscosity showed high linear correlation (R2 = 0.9979) at the water flow pressure 30 mbar and oil flow pressure 40 mbar.

Highly Sensitive Micropatterned Interdigitated Electrodes for Enhancing the Concentration Effect Based on Dielectrophoresis

The concentration effect of dielectrophoresis (DEP) enables detection of biomolecules with high sensitivity. In this study, microstructures were patterned between the interdigitated microelectrodes (IMEs) to increase the concentration effect of DEP. The microstructures increased the electric field gradient (∇|E2|) between the IMEs to approximately 6.61-fold higher than in the bare IMEs with a gap of 10 μm, resulting in a decreased optimal voltage to concentrate amyloid beta 42 (Aβ₄₂, from 0.8 V_pp to 0.5 V_pp) and tau-441 (from 0.9 V_pp to 0.6 V_pp) between the IMEs. Due to the concentration effect of DEP, the impedance change in the optimal condition was higher than the values in the reference condition at 2.64-fold in Aβ₄₂ detection and at 1.59-fold in tau-441 detection. This concentration effect of DEP was also verified by counting the number of gold (Au) particles which conjugated with the secondary antibody. Finally, an enhanced concentration effect in the patterned IMEs was verified by measuring the impedance change depending on the concentration of Aβ₄₂ and tau-441. Our results suggest that microstructures increase the concentration effect of DEP, leading to enhanced sensitivity of the IMEs.

Dielectrophoresis velocities response on tapered electrode profile: simulation and experimental

Purpose

The purpose of this paper is to use a particle velocity measurement technique on a tapered microelectrode device via changes of an applied voltage, which is an enhancement of the electric field density in influencing the dipole moment particles. Polystyrene microbeads (PM) have used to determine the responses of the dielectrophoresis (DEP) voltage based on the particle velocity technique.

Design/methodology/approach

Analytical modelling was used to simulate the particles’ polarization and their velocity based on the Clausius–Mossotti Factor (CMF) equation. The electric field intensity and DEP forces were simulated through the COMSOL numerical study of the variation of applied voltages such as 5 V p-p, 7 V p-p and 10 V p-p. Experimentally, the particle velocity on a tapered DEP response was quantified via the particle travelling distance over a time interval through a high-speed camera adapted to a high-precision non-contact depth measuring microscope.

Findings

The result of the particle velocity was found to increase, and the applied voltage has enhanced the particle trajectory on the tapered microelectrode, which confirmed its dependency on the electric field intensity at the top and bottom edges of the electrode. A higher magnitude of particle levitation was recorded with the highest particle velocity of 11.19 ± 4.43 µm/s at 1 MHz on 10 V p-p, compared to the lowest particle velocity with 0.62 ± 0.11 µm/s at 10 kHz on 7 V p-p.

Practical implications

This research can be applied for high throughout sensitivity and selectivity of particle manipulation in isolating and concentrating biological fluid for biomedical implications.

Originality/value

The comprehensive manipulation method based on the changes of the electrical potential of the tapered electrode was able to quantify the magnitude of the particle trajectory in accordance with the strong electric field density.

Microfluidic Platform for Multimodal Analysis of Enzyme Secretion in Nanoliter Droplet Arrays

High-throughput screening of cell-secreted proteins is essential for various biotechnological applications. In this article, we show a microfluidic approach to perform the analysis of cell-secreted proteins in nanoliter droplet arrays by two complementary methods, fluorescence microscopy and mass spectrometry. We analyzed the secretion of the enzyme phytase, a phosphatase used as an animal feed additive, from a low number of yeast cells. Yeast cells were encapsulated in nanoliter volumes by droplet microfluidics and deposited on spatially defined spots on the surface of a glass slide mounted on the motorized stage of an inverted fluorescence microscope. During the following incubation for several hours to produce phytase, the droplets can be monitored by optical microscopy. After addition of a fluorogenic substrate at a defined time, the relative concentration of phytase was determined in every droplet. Moreover, we demonstrate the use of matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) to monitor the multistep conversion of the native substrate phytic acid by phytase secreted in 7 nL droplets containing 50-100 cells. Our method can be adapted to various other protocols. As the droplets are easily accessible, compounds such as assay reagents or matrix molecules can be added to all or to selected droplets only, or part of the droplet volume could be removed. Hence, this platform is a versatile tool for questions related to cell secretome analysis.

In-droplet microparticle washing and enrichment using surface acoustic wave-driven acoustic radiation force

Washing and enrichment of particles and cells are crucial sample preparation procedures in biomedical and biochemical assays. On-chip in-droplet microparticle washing and enrichment have been pursued but remained problematic due to technical difficulties, especially simultaneous and precise control over the droplet interface and in-droplet samples. Here, we have achieved a breakthrough in label-free, continuous, on-demand, in-droplet microparticle washing and enrichment using surface acoustic waves. When exposed to the acoustic field, the droplet and suspended particles experience acoustic radiation force arising from inhomogeneous wave scattering at the liquid/liquid and liquid/solid interfaces. Based on these acoustophoretic phenomena, we have demonstrated in-droplet microparticle washing and enrichment in an acoustofluidic device. We expect that the proposed acoustic method will offer new perspectives to sample washing and enrichment by performing the operation in microscale droplets.

Particle Manipulation Methods in Droplet Microfluidics

This Feature describes the different particle manipulation techniques available in the droplet microfluidics toolbox to handle particles encapsulated inside droplets and to manipulate whole droplets. We address the advantages and disadvantages of the different techniques to guide new users.

In-droplet microparticle separation using travelling surface acoustic wave

Droplets in microfluidic systems can contain microscale objects such as cells and microparticles. The control of the positions of microscale objects within a microchannel is crucial for practical applications in not only continuous-flow-based but also droplet-based systems. This paper proposes an active method for the separation of microparticles inside moving droplets which uses travelling surface acoustic waves (TSAWs). We demonstrate the preconcentration and separation of 5 and 10 μm polystyrene microparticles in moving water-in-oil droplets through the application of TSAWs with two different frequencies. The microparticles inside the droplets are affected by the acoustic radiation force induced by the TSAWs to move laterally in the direction of the TSAW propagation and are thereby separated according to their size. In-droplet separation is then demonstrated through droplet splitting at a Y-junction. Compared to our previous studies, this acoustic approach offers the label-free and on-demand separation of different-sized micro-objects in moving droplets. The present method has potential uses such as in-droplet sample purification and enrichment.

High-throughput droplet microfluidics screening platform for selecting fast-growing and high lipid-producing microalgae from a mutant library

Biofuels derived from microalgal lipids have demonstrated a promising potential as future renewable bioenergy. However, the production costs for microalgae-based biofuels are not economically competitive, and one strategy to overcome this limitation is to develop better-performing microalgal strains that have faster growth and higher lipid content through genetic screening and metabolic engineering. In this work, we present a high-throughput droplet microfluidics-based screening platform capable of analyzing growth and lipid content in populations derived from single cells of a randomly mutated microalgal library to identify and sort variants that exhibit the desired traits such as higher growth rate and increased lipid content. By encapsulating single cells into water-in-oil emulsion droplets, each variant was separately cultured inside an individual droplet that functioned as an independent bioreactor. In conjunction with an on-chip fluorescent lipid staining process within droplets, microalgal growth and lipid content were characterized by measuring chlorophyll and BODIPY fluorescence intensities through an integrated optical detection system in a flow-through manner. Droplets containing cells with higher growth and lipid content were selectively retrieved and further analyzed off-chip. The growth and lipid content screening capabilities of the developed platform were successfully demonstrated by first carrying out proof-of-concept screening using known Chlamydomonas reinhardtii mutants. The platform was then utilized to screen an ethyl methanesulfonate (EMS)-mutated C. reinhardtii population, where eight potential mutants showing faster growth and higher lipid content were selected from 200,000 examined samples, demonstrating the capability of the platform as a high-throughput screening tool for microalgal biofuel development.