Water-soluble mercury ion sensing based on the thymine-Hg2+-thymine base pair using retroreflective Janus particle as an optical signaling probe

Recent developments of (bio)-sensors for detection of main microbiological and non-biological pollutants in plastic bottled water samples: A critical review

The importance of water in all biological processes is undeniable. Ensuring access to clean and safe drinking water is crucial for maintaining sustainable water resources. To elaborate, the consumption of water of inadequate quality can have a repercussion on human health. Furthermore, according to the instability of tap water quality, the consumption rate of bottled water is increasing every day at the global level. Although most people believe bottled water is safe, it can also be contaminated by microbiological or chemical pollution, which can increase the risk of disease. Over the last decades, several conventional analytical tools applied to analyze the contamination of bottled water. On the other hand, some limitations restrict their application in this field. Therefore, biosensors, as emerging analytical method, attract tremendous attention for detection both microbial and chemical contamination of bottled water. Biosensors enjoy several facilities including selectivity, affordability, and sensitivity. In this review, the developed biosensors for analyzing contamination of bottled water were highlighted, as along with working strategies, pros and cons of studies. Challenges and prospects were also examined.

Two-mode sensing strategies based on tunable cobalt metal organic framework active sites to detect Hg2

Heavy metal pollution poses a major threat to human health, and developing a user-deliverable heavy metal detection strategy remains a major challenge. In this work, two-mode Hg2+ sensing platforms based on the tunable cobalt metal-organic framework (Co-MOF) active site strategy are constructed, including a colorimetric, and an electrochemical assay using a personal glucose meter (PGM) as the terminal device. Specifically, thymine (T), a single, adaptable nucleotide, is chosen to replace typical T-rich DNA aptamers. The catalytic sites of Co-MOF are tuned competitively by the specific binding of T-Hg2+-T, and different signal output platforms are developed based on the different enzyme-like activities of Co-MOF. DFT calculations are utilized to analyze the interaction mechanism between T and Co-MOF with defect structure. Notably, the two-mode sensing platforms exhibit outstanding detection performance, with LOD values as low as 0.5 nM (colorimetric) and 3.69 nM (PGM), respectively, superior to recently reported nanozyme-based Hg2+ sensors. In real samples of tap water and lake water, this approach demonstrates an effective recovery rate and outstanding selectivity. Surprisingly, the method is potentially versatile and, by exchanging out T-Hg2+-T, can also detect Ag+. This simple, portable, and user-friendly Hg2+ detection approach shows plenty of promise for application in the future.

Enhanced emulsification performance and interfacial properties of Janus-like rapeseed cruciferin through asymmetric acylation modification

Plant protein emulsifiers, particularly rapeseed protein isolate with its superior amino acid composition and predominantly globular protein, have captured significant interest in the food industry. Nonetheless, the application of these proteins has been stymied by their lackluster emulsification properties. Addressing this challenge, our study implements an innovative asymmetric acylation technique to modify the surface of rapeseed cruciferin (RC), morphing it into a structure resembling Janus nanoparticles. This alteration amplifies the emulsification prowess of RC by a remarkable 2.7 times compared to its natural form, and 1.43 times over its conventionally acylated counterpart. The asymmetrically acylated RC, marked by a distinctive three-phase contact angle of 90.4°, manifests an outstanding amphiphilic character. Moreover, it surpasses both the natural and conventionally acylated RC in terms of diffusion, penetration, and rearrangement rates, as well as protein concentration at the oil-water interface. Compared to commonly used emulsifiers in the food industry, such as lecithin and soy protein, the asymmetrically acylated RC stands out, stabilizing emulsions with the tiniest particle size and effectively staving off emulsion stratification over a longer duration. This study underscores that asymmetric acylation serves as a reliable methodology for producing efficient plant protein emulsifiers, considerably amplifying their utility in the food industry.

A novel and cost-effective method for high-throughput 3D culturing and rhythmic assessment of hiPSC-derived cardiomyocytes using retroreflective Janus microparticles

BACKGROUND

Human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) gain attention as a potent cell source in regenerative medicine and drug discovery. With the necessity of the demands for experimental models to create a more physiologically relevant model of the heart in vitro we herein investigate a 3D culturing platform and a method for assessing rhythm in hiPSC-CMs.

METHODS

The 3D cell culture PAMCELL™ plate is designed to enable cells to attach exclusively to adhesive patterned areas. These cell adhesive zones, named as micro-patterned pads, feature micron silica beads that are surface-modified with the well-known arginyl-glycyl-aspartic acid (RGD) peptide. RGD binding to the surface of hiPSC-CMs facilitates cell-cell attachment and the formation of uniform-size spheroids, which is controlled by the diameter of the micro-patterned pads. The assessment and evaluation of 3D hiPSC-CMs beating pattern are carried out using reflective properties of retroreflective Janus micro-particle (RJP). These RJPs are modified with an antibody targeting the gap junction protein found on the surface of hiPSC-CM spheroids. The signal assessment system comprises a camera attached to an optical microscope and a white light source.

RESULTS

The 3D PAMCELL™ R100 culture plate efficiently generate approximately 350 uniform-sized hiPSC-CM spheroids in each well of a 96-well plate and supported a 20-day culture. Analysis of genes and protein expression levels reveal that iPSC-CM spheroids grown on PAMCELL™ R100 retain cardiac stem cell characteristics and functions, outperforming traditional 2D culture platform. Additionally, the RJPs enable monitoring and evaluation of in vitro beating properties of cardiomyocytes without using complex monitoring setup. The system demonstrates its capability to identify alteration in the rhythmic activity of cardiac cells when exposed to ion channel blockers, nifedipine and E4031.

CONCLUSIONS

The integration of the 3D culture method and RJPs in this study establishes a platform for evaluating the rhythmic properties of 3D hiPSC-CMs. This approach holds significant potential for identifying arrhythmias or other cardiac abnormalities, ultimately contributing to the development of more effective therapies for heart diseases.

Recent advances in fluorescent materials for mercury(ii) ion detection

Invading mercury would cause many serious health hazards such as kidney damage, genetic freak, and nerve injury to human body. Thus, developing highly efficient and convenient mercury detection methods is of great significance for environmental governance and protection of public health. Motivated by this problem, various testing technologies for detecting trace mercury in the environment, food, medicines or daily chemicals have been developed. Among them, the fluorescence sensing technology is a sensitive and efficient detection method for detecting Hg2+ ions due to its simple operation, rapid response and economic value. This review aims to discuss the recent advances in fluorescent materials for Hg2+ ion detection. We reviewed the Hg2+ sensing materials and divided them into seven categories according to the sensing mechanism: static quenching, photoinduced electron transfer, intramolecular charge transfer, aggregation-induced emission, metallophilic interaction, mercury-induced reactions and ligand-to-metal energy transfer. The challenges and prospects of fluorescent Hg2+ ion probes are briefly presented. We hope that this review can provide some new insights and guidance for the design and development of novel fluorescent Hg2+ ion probes to promote their applications.

Improving aptamer performance: key factors and strategies

Aptamers are functional single-stranded oligonucleotide fragments isolated from randomized libraries by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), exhibiting excellent affinity and specificity toward targets. Compared with traditional antibody reagents, aptamers display many desirable properties, such as low variation and high flexibility, and they are suitable for artificial and large-scale synthesis. These advantages make aptamers have a broad application potential ranging from biosensors, bioimaging to therapeutics and other areas of application. However, the overall performance of aptamer pre-selected by SELEX screening is far from being satisfactory. To improve aptamer performance and applicability, various post-SELEX optimization methods have been developed in the last decade. In this review, we first discuss the key factors that influence the performance or properties of aptamers, and then we summarize the key strategies of post-SELEX optimization which have been successfully used to improve aptamer performance, such as truncation, extension, mutagenesis and modification, splitting, and multivalent integration. This review shall provide a comprehensive summary and discussion of post-SELEX optimization methods developed in recent years. Moreover, by discussing the mechanism of each approach, we highlight the importance of choosing the proper method to perform post-SELEX optimization.

Target-Specific Delivery and Bioavailability of Pharmaceuticals via Janus and Dendrimer Particles

Nanosized Janus and dendrimer particles have emerged as promising nanocarriers for the target-specific delivery and improved bioavailability of pharmaceuticals. Janus particles, with two distinct regions exhibiting different physical and chemical properties, provide a unique platform for the simultaneous delivery of multiple drugs or tissue-specific targeting. Conversely, dendrimers are branched, nanoscale polymers with well-defined surface functionalities that can be designed for improved drug targeting and release. Both Janus particles and dendrimers have demonstrated their potential to improve the solubility and stability of poorly water-soluble drugs, increase the intracellular uptake of drugs, and reduce their toxicity by controlling the release rate. The surface functionalities of these nanocarriers can be tailored to specific targets, such as overexpressed receptors on cancer cells, leading to enhanced drug efficacy The design of these nanocarriers can be optimized by tuning the size, shape, and surface functionalities, among other parameters. The incorporation of Janus and dendrimer particles into composite materials to create hybrid systems for enhancing drug delivery, leveraging the unique properties and functionalities of both materials, can offer promising outcomes. Nanosized Janus and dendrimer particles hold great promise for the delivery and improved bioavailability of pharmaceuticals. Further research is required to optimize these nanocarriers and bring them to the clinical setting to treat various diseases. This article discusses various nanosized Janus and dendrimer particles for target-specific delivery and bioavailability of pharmaceuticals. In addition, the development of Janus-dendrimer hybrid nanoparticles to address some limitations of standalone nanosized Janus and dendrimer particles is discussed.

Target-Specific Delivery and Bioavailability of Pharmaceuticals via Janus and Dendrimer Particles

Nanosized Janus and dendrimer particles have emerged as promising nanocarriers for the target-specific delivery and improved bioavailability of pharmaceuticals. Janus particles, with two distinct regions exhibiting different physical and chemical properties, provide a unique platform for the simultaneous delivery of multiple drugs or tissue-specific targeting. Conversely, dendrimers are branched, nanoscale polymers with well-defined surface functionalities that can be designed for improved drug targeting and release. Both Janus particles and dendrimers have demonstrated their potential to improve the solubility and stability of poorly water-soluble drugs, increase the intracellular uptake of drugs, and reduce their toxicity by controlling the release rate. The surface functionalities of these nanocarriers can be tailored to specific targets, such as overexpressed receptors on cancer cells, leading to enhanced drug efficacy The design of these nanocarriers can be optimized by tuning the size, shape, and surface functionalities, among other parameters. The incorporation of Janus and dendrimer particles into composite materials to create hybrid systems for enhancing drug delivery, leveraging the unique properties and functionalities of both materials, can offer promising outcomes. Nanosized Janus and dendrimer particles hold great promise for the delivery and improved bioavailability of pharmaceuticals. Further research is required to optimize these nanocarriers and bring them to the clinical setting to treat various diseases. This article discusses various nanosized Janus and dendrimer particles for target-specific delivery and bioavailability of pharmaceuticals. In addition, the development of Janus-dendrimer hybrid nanoparticles to address some limitations of standalone nanosized Janus and dendrimer particles is discussed.

Photoreactive Mercury-Containing Metallosupramolecular Nanoparticles with Tailorable Properties That Promote Enhanced Cellular Uptake for Effective Cancer Chemotherapy

A new potential route to enhance the efficiency of supramolecular polymers for cancer chemotherapy was successfully demonstrated by employing a photosensitive metallosupramolecular polymer (Hg-BU-PPG) containing an oligomeric poly(propylene glycol) backbone and highly sensitive pH-responsive uracil-mercury-uracil (U-Hg-U) bridges. This route holds great promise as a multifunctional bioactive nano-object for development of more efficient and safer cancer chemotherapy. Owing to the formation of uracil photodimers induced by ultraviolet irradiation, Hg-BU-PPG can form a photo-cross-linked structure and spontaneously forms spherical nanoparticles in aqueous solution. The irradiated nanoparticles possess many unique characteristics, such as unique fluorescence behavior, highly sensitive pH-responsiveness, and intriguing phase transition behavior in aqueous solution as well as high structural stability and antihemolytic activity in biological media. More importantly, a series of cellular studies clearly confirmed that the U-Hg-U photo-cross-links in the irradiated nanoparticles substantially enhance their selective cellular uptake by cancer cells via macropinocytosis and the mercury-loaded nanoparticles subsequently induce higher levels of cytotoxicity in cancer cells (compared to non-irradiated nanoparticles), without harming normal cells. These results are mainly attributed to cancer cell microenvironment-triggered release of mercury ions from disassembled nanoparticles, which rapidly induce massive levels of apoptosis in cancer cells. Overall, the pH-sensitive U-Hg-U photo-cross-links within this newly discovered supramolecular system are an indispensable factor that offers a potential path to remarkably enhance the selective therapeutic effects of functional nanoparticles toward cancer cells.

Mechanical Janus Structures by Soft-Hard Material Integration

Engineering Janus structures that possess anisotropic features in functions have attracted growing attention for a wide range of applications in sensors, catalysis, and biomedicine, and are yet usually designed at the nanoscale with distinct physical or chemical functionalities in their opposite sides. Inspired by the seamless integration of soft and hard materials in biological structures, here a mechanical Janus structure composed of soft and hard materials with a dramatic difference in mechanical properties at an additively manufacturable macroscale is presented. In the combination of extensive experimental, theoretical, and computational studies, the design principle of soft-hard materials integrated mechanical Janus structures is established and their unique rotation mechanism is addressed. The systematic studies of assembling the Janus structure units into superstructures with well-ordered organizations by programming the local rotations are further shown, providing a direct route of designing superstructures by leveraging mechanical Janus structures with unique soft-hard material integration. Applications are conducted to demonstrate the features and functionalities of assembled superstructures with local ordered organizations in regulating and filtering acoustic wave propagations, thereby providing exemplification applications of mechanical Janus design in functional structures and devices.

Rapid Determination of Mercury Ions in Environmental Water Based on an N-Rich Covalent Organic Framework Potential Sensor

In this article, an N-rich covalent organic framework (COFTFPB-TZT) was successfully synthesized using 4,4′,4′-(1,3,5-triazine-2,4,6-triyl) trianiline (TZT), and 4-[3,5-bis (4-formyl-phenyl) phenyl] benzaldehyde (TFPB). The as-prepared COFTFPB-TZT possesses irregular cotton wool patches with a large specific surface area. A novel selective electrode based on COFTFPB-TZT was used for the determination of Mercury ions. The abundance of N atoms in COFTFPB-TZT provides more coordination sites for Hg2+ adsorption, resulting in a change in the surface membrane potential of the electrode to selectively recognize Hg2+. Under optimal experimental conditions, the ion-selective electrode shows a good potential response to Hg2+, with a linear range of 1.0 × 10−9∼1.0 × 10−4, a Nernst response slope of 30.32 ± 0.2 mV/-PC at 25°C and a detection limit of 4.5 pM. At the same time, the mercury-ion electrode shows a fast response time of 10 s and good reproducibility and stability. The selectivity coefficients for Fe2+, Zn2+, As3+, Cr6+, Cu2+, Cr3+, Al3+, Pb2+, NH4+, Ag+, Ba2+, Mg2+, Na+, and K+ are found to be small, indicating no interference in the detection system. The proposed method can be successfully applied to the determination of Hg2+ in 3 typical environmental water samples, with a recovery rate of 98.6–101.8%. In comparison with the spectrophotometric method utilizing dithizone, the proposed method is simple and fast and holds great potential application prospects in environmental water quality monitoring and other fields.

Shedding Light on Luminescent Janus Nanoparticles: From Synthesis to Photoluminescence and Applications

Luminescent Janus nanoparticles refer to a special category of Janus-based nanomaterials that not only exhibit dual-asymmetric surface nature but also attractive optical properties. The introduction of luminescence has endowed conventional Janus nanoparticles with many alluring light-responsive functionalities and broadens their applications in imaging, sensing, nanomotors, photo-based therapy, etc. The past few decades have witnessed significant achievements in this field. This review first summarizes well-established strategies to design and prepare luminescent Janus nanoparticles and then discusses optical properties of luminescent Janus nanoparticles based on downconversion and upconversion photoluminescence mechanisms. Various emerging applications of luminescent Janus nanoparticles are also introduced. Finally, opportunities and future challenges are highlighted with respect to the development of next-generation luminescent Janus nanoparticles with diverse applications.

Demand-oriented construction of Mo3S13-LDH: A versatile scavenger for highly selective and efficient removal of toxic Ag(I), Hg(II), As(III), and Cr(VI) from water

Inspired by the classic ion-exchange reaction, a single phase material of Mg_0.66Al_0.34(OH)₂(Mo₃S₁₃)_0.03(NO₃)_0.14(CO₃)_0.07·H₂O (Mo₃S₁₃-LDH) was masterly constructed by intercalating Mo₃S₁₃^2- into the MgAl-LDH gallery. Prepared Mo₃S₁₃-LDH displays excellent binding affinity and high selectivity for Ag(I) and Hg(II) in a mixed solution, in which an apparent selectivity order of Hg(II) > Ag(I) ≫ Pb(II), Cu(II), Ni(II), Co(II), Cd(II), and Mn(II) is observed. Enormous capture capacities (q_m^Ag = 446.4 mg/g, q_m^Hg = 354.6 mg/g) and fast equilibration time (within 60 min) place Mo₃S₁₃-LDH in the upper ranks of materials for such removal. For oxoanions, As(III) (HAsO₃^2-) and Cr(VI) (CrO₄^2-) can be specifically trapped by Mo₃S₁₃-LDH with comparable loading ability (q_m^As = 61.8 mg/g, q_m^Cr = 90.6 mg/g) in the coexistence of multiple interfering anions. Notably, high Hg(II) and Cr(VI) concentrations are finally reduced below the safe limit of drinking water. The excellent capture capacity of Mo₃S₁₃-LDH benefits from the rational design by following two aspects: (i) the multiple sulfur ligands in Mo₃S₁₃^2- groups give place to various capture modes and different affinity orders for target ions, and (ii) large-sized Mo₃S₁₃^2- groups widen the interlayer spacing of LDH, thereby accelerating the mass transfer process. Furthermore, the satisfactory structural stability of Mo₃S₁₃-LDH is also reflected through the unchanged hexagonal prismatic shape after adsorption. All of these highlight the great potential of Mo₃S₁₃-LDH for the application in water remediation.

Ultra-sensitive dielectrophoretic surface charge multiplex detection inside a micro-dielectrophoretic device

Label-free dielectrophoretic force-based surface charge detection has shown great potential for highly sensitive and selective sensing of metal ions and small biomolecules. However, this method suffers from a complex calibration process and measurement signal interference in simultaneous multi-analyte detection, thus creating difficulties in multiplex detection. We have developed a method to overcome these issues based on the optical discrimination of the dielectrophoretic behaviors of multiple microparticle probes considering the surface charge difference before and after self-assembling conjugation. In this report, we demonstrate and characterize this dielectrophoretic force-based surface charge detection method with particle probes functionalized by various biomolecules. This technique achieved an attomolar limit of detection (LOD) for Hg²⁺ in distilled water and a femtomolar LOD in drinking water using DNA aptamer-functionalized particle probes. More importantly, using two different DNA aptamer-functionalized particle probes for Hg²⁺ and Ag⁺, label-free dielectrophoretic multiplex detection of these species in drinking water with a femtomolar and a nanomolar LOD was achieved for the first time.

Aptamer-functionalized and silver-coated polydopamine-copper hybrid nanoflower adsorbent embedded with magnetic nanoparticles for efficient mercury removal

Mercury (Hg) emissions are increasing annually owing to rapid global industrialization. Hg poisoning can severely affect the human body owing to its persistence and bioaccumulation. In this study, hybrid nanoflowers (NFs) were synthesized by promoting the formation of primary copper-phosphate crystals coordinated with polydopamine (PDA) and Fe₃O₄ magnetic nanoparticles (MNPs), followed by coating with silver nanoparticles on the surface of the NFs (Ag-MNP-PDA-Cu NFs). The results suggest that the hierarchical structure of the NFs enabled a large surface area with nanosized pores, which were exploited for Hg adsorption. The adsorbed Hg ions could be further eliminated from the solution based on the magnetic characteristics of the NFs. Additionally, hybrid NFs functionalized with Hg²⁺-binding aptamers (Apt-Ag-MNP-PDA-Cu NFs) were prepared based on the silver-sulfur interactions between the Ag-MNP-PDA-Cu NFs and thiol-modified aptamers. The performance of both adsorbents demonstrated that the immobilization of Hg²⁺-binding aptamers significantly improved the elimination of Hg from solution. The Hg²⁺ adsorption isotherm of the Apt-Ag-MNP-PDA-Cu NFs followed the Dubinin-Radushkevich model, with a maximum adsorption capacity of 1073.19 mg/g. The Apt-Ag-MNP-PDA-Cu NFs adsorbed greater amounts of Hg²⁺ than the non-functionalized NFs at the same concentrations, which confirmed that the functionalization of Hg²⁺-binding aptamers on the NFs improved the Hg²⁺ removal performance. The results suggest that Apt-Ag-MNP-PDA-Cu NFs could serve as an efficient Hg-removing adsorbent, possibly by providing binding sites for the formation of T-Hg²⁺-T complexes.

Retroreflection-based sandwich type affinity sensing of isothermal gene amplification products for foodborne pathogen detection

Loop-mediated isothermal amplification (LAMP) is an outstanding method for molecular diagnostics, as the rapid, specific, and sensitive amplification of target genes is possible. However, it is necessary to measure fluorescence in the quantitative analysis of LAMP products, so a sophisticated optical setup is required. This study tried to develop a novel sensing method that can quantify target analytes with simple equipment, such as nonspectroscopic white light and a CMOS camera. To achieve this, a retroreflective Janus particle (RJP) as a probe and specially designed loop primers, fluorescein isothiocyanate (FITC)- and biotin-modified loop primers, were introduced into the LAMP system. By performing LAMP in the presence of designed primers, double-stranded amplicons possessing FITC and biotin labels at each end are generated in proportion to the quantity of the target pathogen. Using the anti-FITC antibody-modified sensing surface and streptavidin-conjugated RJP probes, the amplicons can be captured in sandwich-configuration and detected under nonspectroscopic conditions composed of white light and a camera. To confirm the feasibility of the sensing system, the invA gene of Salmonella was selected as the target. It was possible to quantitatively analyze the Salmonella concentration from 0 to 10⁶ colony-forming units, sufficiently covering the required detection range. In addition, quantitative analyses of pathogens in contaminated food sources, including milk and chicken meat, were successfully conducted with a limit of detection of 10 CFU.

Wash-free operation of smartphone-integrated optical immunosensor using retroreflective microparticles

Herein, we introduce a smartphone-integrated immunosensor based on non-spectroscopic optical detection. Sedimentation of the retroreflector and gentle inversion of the microfluidic chip was chosen as biosensing principles to ensure minimal human involvement. To realize this, wash-free immunosensing was implemented on a polymeric microfluidic chip device fabricated for light signal penetration in retroreflection signal acquisition. Applying a transparent chip and passive modulation of retroreflectors enabled the minimization of human error during sensing. In addition, a retroreflection-detectable optical gadget was constructed for integration with the commercial smartphone. The gadget had an optical chamber that induced retroreflection by integration with a smartphone. When the micro-sized reflector, named the retroreflective Janus microparticle, reacted on the sensing surface, the incident light was retroreflected towards the image sensor and quantified by a smartphone-installed Android application package. The developed application package features include time-lapse image capture performed by manipulating LED flash and camera modules, and quantification of retroreflected signal counts by image processing of time-lapse images. With this platform, the user could independently commence optical signal processing without a complicated optical setup and running software on a PC, and sensitive and reproducible immunosensing results could be obtained. The applicability test for creatine kinase-myocardial band detection from the buffer to serum was conducted and presented a calibration curve of 0-1000 ng/mL within 1 h. With the developed system, we believe that the applicability of the platform in bioanalytical detection can be expanded.

Recent advances in constructing high-order DNA structures

Molecular self-assembly is widely used in the fields of biosensors, molecular devices, efficient catalytic materials, and medical biomaterials. As the carrier of genetic information, DNA is a kind of biomacromolecule composed of deoxyribonucleotide units. DNA nanotechnology extends DNA of its original properties as a molecule that stores and transmits genetic information from its biological environment. By taking advantage of its unique base pairing and inherent biocompatibility to produce structurally-defined supramolecular structures. With the continuously development of DNA technology, the assembly method of DNA nanostructures is not only limited on the basis of DNA hybridization but also other biochemical interactions. In this review, we summarize the latest methods used to construct high-order DNA nanostructures. The problems of DNA nanostructures are discussed and the future directions in this field are provided.

Stretchable, rapid self-healing guar gum-poly(acrylic acid) hydrogels as wearable strain sensors for human motion detection based on Janus graphene oxide

Wearable strain sensors have received widespread attention in research fields due to their applications in human motion detection. In this manuscript, the fabrication of functionalized Janus graphene oxide (GO) nanosheets were used by Pickering emulsion template. Polypyrrole (PPy) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) were asymmetrically grafted on the two sides of GO (GO@PPy/PDMAEMA Janus NS), which successfully applied to synthesize Janus NS/guar gum-poly(acrylic acid) (GG-PAA) self-healing nanocomposite hydrogels. The outstandingly improved self-healing efficiency (92.8% for 2 h) and mechanical properties (strength of 4.12 MPa and toughness of 873.8%) of nanocomposite hydrogels were mainly supported by the collaborative effect of reversible electrostatic interactions, multiple hydrogen bonds and metal-ligand coordination. Moreover, the hydrogels exhibited strain sensitivity and could be able to monitor a variety of human motions, which have outstanding application prospects in wearable flexible sensors.

Label-free Hg(II) electrochemiluminescence sensor based on silica nanoparticles doped with a self-enhanced Ru(bpy)32+-carbon nitride quantum dot luminophore

Herein, a label-free, self-enhanced electrochemiluminescence (ECL) sensing strategy for divalent mercury (Hg(II)) detection was presented. First, a novel self-enhanced ECL luminophore was prepared by combining the ECL reagent tris(2, 2'-bipyridyl) dichlororuthenium(II) hexahydrate (Ru(bpy)₃²⁺) and its co-reactant carbon nitride quantum dots (CNQDs) via electrostatic interactions. In contrast to traditional ECL systems where the emitter and its co-reactant underwent an intermolecular reaction, the self-enhanced ECL system exhibited a shortened electron-transfer distance and enhanced luminous efficiency because the electrons transferred from CNQDs to oxidized Ru(bpy)₃²⁺ via an intramolecular pathway. Furthermore, the as-prepared self-enhanced ECL material was encapsulated in silica (SiO₂) nanoparticles to generate a Ru-QDs@SiO₂ luminophore. Based on the different affinity of Ru-QDs@SiO₂ nanoparticles for single-stranded DNA (ssDNA) and Hg(II)-triggered double-stranded DNA (dsDNA), a label-free ECL biosensor for Hg(II) detection was developed as follows: in the absence of Hg(II), ssDNA was adsorbed on Ru-QDs@SiO₂ surface via hydrogen bond, electrostatic, and hydrophobic interaction. Thus, quenched ECL signal was observed. On the contrary, in the presence of Hg(II), stable dsDNA was formed and carried the ssDNA separating from Ru-QDs@SiO₂ surface, resulting in most of Ru-QDs@SiO₂ existing in their free state. Therefore, a recovered ECL intensity was obtained. On this basis, Hg(II) was measured by the proposed method in the range of 0.1 nM-10 μM, with a detection limit of 33 pM. Finally, Hg(II) spiked in water samples was measured to evaluate the practicality of the fabricated biosensor.

Hg(II) Binding to Thymine Bases in DNA

The compounds of mercury can be highly toxic and can interfere with a range of biological processes, although many aspects of the mechanism of toxicity are still obscure or unknown. One especially intriguing property of Hg(II) is its ability to bind DNA directly, making interstrand cross-links between thymine nucleobases in AT-rich sequences. We have used a combination of small molecule X-ray diffraction, X-ray spectroscopies, and computational chemistry to study the interactions of Hg(II) with thymine. We find that the energetically preferred mode of thymine binding in DNA is to the N3 and predict only minor distortions of the DNA structure on binding one Hg(II) to two cross-adjacent thymine nucleotides. The preferred geometry is predicted to be twisted away from coplanar through a torsion angle of between 32 and 43°. Using 1-methylthymine as a model, the bis-thymine coordination of Hg(II) is found to give a highly characteristic X-ray spectroscopic signature that is quite distinct from other previously described biological modes of binding of Hg(II). This work enlarges and deepens our view of significant biological targets of Hg(II) and demonstrates tools that can provide a characteristic signature for the binding of Hg(II) to DNA in more complex matrices including intact cells and tissues, laying the foundation for future studies of mechanisms of mercury toxicity.

A Gadolinium(III) Complex Based on the Thymine Nucleobase with Properties Suitable for Magnetic Resonance Imaging

The paramagnetic gadolinium(III) ion is used as contrast agent in magnetic resonance (MR) imaging to improve the lesion detection and characterization. It generates a signal by changing the relaxivity of protons from associated water molecules and creates a clearer physical distinction between the molecule and the surrounding tissues. New gadolinium-based contrast agents displaying larger relaxivity values and specifically targeted might provide higher resolution and better functional images. We have synthesized the gadolinium(III) complex of formula [Gd(thy)₂(H₂O)₆](ClO₄)₃·2H₂O (1) [thy = 5-methyl-1H-pyrimidine-2,4-dione or thymine], which is the first reported compound based on gadolinium and thymine nucleobase. 1 has been characterized through UV-vis, IR, SEM-EDAX, and single-crystal X-ray diffraction techniques, and its magnetic and relaxometric properties have been investigated by means of SQUID magnetometer and MR imaging phantom studies, respectively. On the basis of its high relaxivity values, this gadolinium(III) complex can be considered a suitable candidate for contrast-enhanced magnetic resonance imaging.

Nonspectroscopic Migratory Cell Monitoring Method Using Retroreflective Janus Microparticles

This study aims to suggest a simple migratory cell monitoring method in the Transwell system by utilizing retroreflective Janus microparticles (RJPs) as an optical probe. The RJP could be internalized on cells without compromising the cell viability and can be registered as bright spots within the cell body by inducing retroreflection from nonspectroscopic light sources. Conventional optical probes (e.g., fluorophores, chromogens, and nanoparticles) have been extensively studied and applied across diverse platforms (e.g., Boyden chamber, wound closing, and microfluidic chips) for understanding in vitro kinetic cell behavior. However, the complexities of running such platforms and setting up analytical instruments are limiting. In this regard, we aimed to demonstrate a modified Transwell migration assay by introducing the retroreflection principle to the cell quantification procedures that ensure a simplified optical setup, assure easy signal acquisition, and are compatible with conventional platforms. To demonstrate retroreflection as a signaling principle, a half-metal-coated silica particle that can induce interior retroreflection was synthesized. Because the RJPs can concentrate incident light and reflect it back to the light source, retroreflection was distinctively recognizable and enabled sensitive visualization. To verify the applicability of the developed migration assay, cell quantification during the incremental progress of macrophage migration, and cell quantification under gradients of chemoattractant monocyte protein-1, was accomplished by obtaining phagocytosed RJP-mediated retroreflection signals. Considering that conventional assays are designed as endpoint measurements, we anticipate the proposed retroreflection-based cell quantification technique to be a promising solution, bypassing current limitations.

A magnetic relaxation switching and visual dual-mode sensor for selective detection of Hg2+ based on aptamers modified Au@Fe3O4 nanoparticles

The solvated mercuric ion (Hg²⁺) from industrial pollutants are highly toxic to the ecological environment and human health. Driven by urgent need for the selective and sensitive detection of Hg²⁺, a magnetic relaxation switching (MRS) based on Fe₃O₄ nanoparticles (NPs) was designed. Practically, the concentrations of Hg²⁺ in industrial pollutant is usually much higher than the detection range. Thus, gold nanoparticles (AuNPs) were synthesized on the surface of Fe₃O₄ NPs to enable the visual detection of Au@Fe₃O₄ NPs. The presence of Hg²⁺ in sample can specifically cause the aggregation of Au@Fe₃O₄-aptamers NPs through T-Hg²⁺-T base pairs, leading to the change in transverse relaxation time T₂ value of detection solution. The MRS sensor showed excellent response for Hg²⁺ ions in the range of 10 nM-100 nM and 100 nM to 5 μM. A highly sensitive and selective measurement of Hg²⁺ was obtained with a limit of detection of 2.7 nM. Noticeably, the visual detection can qualitatively analyze the Hg²⁺ beyond 5 μM by naked eye without advanced instrumentation and skilled operators.

Nanozyme-based sensing platforms for detection of toxic mercury ions: An alternative approach to conventional methods

Mercury (Hg) is known as a poisonous heavy metal which stimulates a wide range of adverse effects on the human health. Therefore, development of some feasible, practical and highly sensitive platforms would be desirable in determination of Hg²⁺ level as low as nmol L^-1 or pmol L^-1. Different approaches such as ICP-MS, AAS/AES, and nanomaterial-based nanobiosensors have been manipulated for determination of Hg²⁺ level. However, these approaches suffer from expensive instruments and complicated sample preparation. Recently, nanozymes have been assembled to address some disadvantages of conventional methods in the detection of Hg²⁺. Along with the outstanding progress in nanotechnology and computational approaches, pronounced improvement has been attained in the field of nanozymes, recently. To accentuate these progresses, this review presents an overview on the different reports of Hg²⁺-induced toxicity on the different tissues followed by various conventional approaches validated for the determination of Hg²⁺ level. Afterwards, different types of nanozymes like AuNPs, PtNPs for quantitative detection of Hg²⁺ were surveyed. Finally, the current challenges and the future directions were explored to alleviate the limitation of nanozyme-based platforms with potential engineering in detection of heavy metals, namely Hg²⁺. The current overview can provide outstanding information to develop nano-based platforms for improvement of LOD and LOQ of analytical methods in sensitive detection of Hg²⁺ and other heavy metals.

Janus particles: from concepts to environmentally friendly materials and sustainable applications

Janus particles represent a unique group of patchy particles combining two or more different physical or chemical functionalities at their opposite sides. Especially, individual Janus particles (JPs) with both chemical and geometrical anisotropy as well as their assembled layers provide considerable advantages over the conventional monofunctional particles or surfactant molecules offering (a) a high surface-to-volume ratio; (b) high interfacial activity; (c) target controlling and manipulation of their interfacial activity by external signals such as temperature, light, pH, or ionic strength and achieving switching between stable emulsions and macro-phase separation; (d) recovery and recycling; (e) controlling the mass transport across the interface between the two phases; and finally (f) tunable several functionalities in one particle allowing their use either as carrier materials for immobilized catalytically active substances or, alternatively, their site-selective attachment to substrates keeping another functionality active for further reactions. All these advantages of JPs make them exclusive materials for application in (bio-)catalysis and (bio-)sensing. Considering “green chemistry” aspects covering biogenic materials based on either natural or fully synthetic biocompatible and biodegradable polymers for the design of JPs may solve the problem of toxicity of some existing materials and open new paths for the development of more environmentally friendly and sustainable materials in the very near future. Considering the number of contributions published each year on the topic of Janus particles in general, the number of contributions regarding their environmentally friendly and sustainable applications is by far smaller. This certainly pinpoints an important challenge and is addressed in this review article. The first part of the review focuses on the synthesis of sustainable biogenic or biocompatible Janus particles, as well as strategies for their recovery, recycling, and reusability. The second part addresses recent advances in applications of biogenic/biocompatible and non-biocompatible JPs in environmental and biotechnological fields such as sensing of hazardous pollutants, water decontamination, and hydrogen production. Finally, we provide implications for the rational design of environmentally friendly and sustainable materials based on Janus particles.

Structural characterization of Janus nanoparticles with tunable geometric and chemical asymmetries by small-angle scattering

Recent advances in polymer chemistry allow a facile, large-scale synthesis of nanoscale Janus particles (JP) with tunable structural and physical properties. Both the structures and distributions of regions with different chemical compositions within JP play an important role in chemical and optical sensing, or in bio-medical applications, such as drug delivery. The structural properties of symmetric JP can be accurately characterized by small-angle scattering (SAS), yet the structure of JP with tunable geometrical and chemical asymmetries (AJP) can be described only qualitatively (e.g., globular, elongated or planar), depending on the value of the scattering exponent in the Porod region of SAS intensity. Here it is shown that identification of AJP and a quantitative description of their morphology can be achieved by using the method of SAS together with contrast variation. This approach is illustrated by providing analytic expressions for SAS intensities and for contrast matching points for two kinds of common multiphase AJP: spheres with one cap and those with two caps. The influence of the model's parameters is presented and discussed, and the structural evolution of AJP upon solvent deuteration is characterized. The results suggest that the combination of the SAS technique with multiphase modeling provides unprecedented detailed information about the structural conformation of AJP, which allows their identification from experimental SAS data. Monte Carlo simulations are performed both to validate the obtained results and to illustrate the above findings for complex AJP for which analytic expressions are not available.

Wash-free non-spectroscopic optical immunoassay by controlling retroreflective microparticle movement in a microfluidic chip

Here, we proposed a retroreflective optical immunoassay platform by introducing the intrinsic sedimentation characteristics of a micro-retroreflector, namely retroreflective Janus particles (RJPs), wherein the sediment-based passive movement of RJPs minimised the random errors due to human involvement and resulted in a simple procedure that does not require the washing step, to follow the concept of point-of-care testing. The transparent sensing interface and the sedimentation property of RJPs were combined to develop a practical retroreflective immunoassay platform. For the sensing surface, transparent silanized poly(methyl methacrylate) was applied to the inverted focusing method. In the retroreflection phenomenon, as the incident light returns to its source by the retroreflector, efficient design of the retroreflective optical path between the light source and retroreflector can be crucial in signal registration. While preparing the RJP-bound transparent substrate on the microfluidic channel, the signal could be achieved more efficiently by directly focusing on the sensing interface, and not via the fluidic channels. To integrate this to build an immunoassay protocol, the sedimentation property of RJPs was employed for microfluidic chip inversion-based particle movement control, which was utilised for both luring and separating RJPs on the sensing surface, resulting in a wash-free immunoassay without any human involvement. To ensure accurate analysis, a time-lapse imaging-based image processing was conducted to eliminate the non-specific signals. To validate the applicability of the proposed immunoassay platform, quantification of acute cardiac infarction marker creatine kinase-MB was performed.

A New Binary Matrix for Specific Detection of Mercury(II) Using Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

The development of simple, low-cost, and specific detection method for mercury (Hg(II)) ions in aqueous media using matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) is a challenge due to matrix interferences and acidity that destroy weak interactions. Herein, a new binary matrix consists of mefenamic acid, and thymine (T) is applied for simple and specific detection of Hg(II) in aqueous solution and blood sample. Mass spectra show metal-to-ligand ratio of 1:2 (Hg(II):T) in which Hg(II) ions are bound to two T molecules and two water molecules, i.e., [Hg(T)₂(H₂O)₂]. The method is simple and fast, and requires cheap reagents. In addition, the spectra show extremely specific signals for Hg(II) ions and insignificant signals in case of other competing metal ions. The concept of our protocol can be applied for other metals. The new matrix may be used for the analysis of small molecules with minimal interferences peaks.

Janus particles: recent advances in the biomedical applications

Janus particles, which are named after the two-faced Roman god Janus, have two distinct sides with different surface features, structures, and compositions. This asymmetric structure enables the combination of different or even incompatible physical, chemical, and mechanical properties within a single particle. Much effort has been focused on the preparation of Janus particles with high homogeneity, tunable size and shape, combined functionalities, and scalability. With their unique features, Janus particles have attracted attention in a wide range of applications such as in optics, catalysis, and biomedicine. As a biomedical device, Janus particles offer opportunities to incorporate therapeutics, imaging, or sensing modalities in independent compartments of a single particle in a spatially controlled manner. This may result in synergistic actions of combined therapies and multi-level targeting not possible in isotropic systems. In this review, we summarize the latest advances in employing Janus particles as therapeutic delivery carriers, in vivo imaging probes, and biosensors. Challenges and future opportunities for these particles will also be discussed.

A non-spectroscopic optical biosensor for the detection of pathogenic Salmonella Typhimurium based on a stem-loop DNA probe and retro-reflective signaling

The detection of foodborne pathogenic microorganisms is an essential issue in molecular diagnostics. Fluorescence-based assays have been widely utilized in molecular diagnostics because of their ability to detect and measure low analyte concentrations. However, conventional fluorescence-based assays require sophisticated optics systems, such as a specific light source and light filter. To overcome these limitations, we developed an optical sensing system using a retroreflective Janus microparticle (RJP) as a signaling probe. Compared to fluorescent dyes, RJPs have the advantage of not requiring complicated optic systems because they can be observed using visible light without a filter. To confirm that RJPs can be used as a probe for molecular diagnostics, Salmonella was detected using a biotinylated stem-loop DNA probe to capture the target gene DNA and a streptavidin-conjugated RJP (SA-RJP) as the detection molecule. When the target gene DNA was present at the sensing surface where the stem-loop DNA probe was immobilized, the biotinylated stem-loop DNA probe was stretched, exposing biotin, which can react with SA-RJP. Since the amount of exposed biotin increased according to the concentration of the applied target gene DNA, the number of observed RJPs on the sensing surface increased with the concentration of the target gene DNA. Consequently, the concentration of Salmonella could be quantitated by counting the number of observed RJPs. Using this system, Salmonella at concentrations ranging from 0 to 100 nM could be analyzed, with high sensitivity and selectivity, with a limit of detection of 2.48 pM.

Hybrid Janus Particles: Challenges and Opportunities for the Design of Active Functional Interfaces and Surfaces

Janus particles are a unique class of multifunctional patchy particles combining two dissimilar chemical or physical functionalities at their opposite sides. The asymmetry characteristic for Janus particles allows them to self-assemble into sophisticated structures and materials not attainable by their homogeneous counterparts. Significant breakthroughs have recently been made in the synthesis of Janus particles and the understanding of their assembly. Nevertheless, the advancement of their applications is still a challenging field. In this Review, we highlight recent developments in the use of Janus particles as building blocks for functional materials. We provide a brief introduction into the synthetic strategies for the fabrication of JPs and their properties and assembly, outlining the existing challenges. The focus of this Review is placed on the applications of Janus particles for active interfaces and surfaces. Active functional interfaces are created owing to the stabilization efficiency of Janus particles combined with their capability for interface structuring and functionalizing. Moreover, Janus particles can be employed as building blocks to fabricate active functional surfaces with controlled chemical and topographical heterogeneity. Ultimately, we will provide implications for the rational design of multifunctional materials based on Janus particles.

Synthesis of Calixarene-Capped Silver Nanoparticles for Colorimetric and Amperometric Detection of Mercury (HgII, Hg0)

Calixarene-functionalized water dispersible silver nanoparticles have been synthesized and characterized on the basis of UV-vis, IR, X-ray diffraction, and high-resolution transmission electron microscopy analysis, and their sensing properties toward metal ions have been investigated. They selectively detect Hg2+ and Hg0 in solution and vapor phases, respectively, with distinct color change. Interference study with mixture of metal ions revealed no interference from any other metal ions used in this study. Their mechanism of detection involved Hg2+-aided displacement of calixarene moiety from the surface of the functionalized nanoparticles, followed by the formation of Ag-Hg amalgam due to interaction of Hg2+ with Ag0 and also the formation of assembly of Ag0 nanoparticles by dipole-dipole interaction of the bare-surfaced nanoparticles. Electrochemical study revealed that with the aid of functionalized nanoparticles, Hg2+ can be detected amperometrically with high sensitivity. The detection limits obtained for Hg2+ by UV-vis study and amperometry are 0.5 nM (0.1 ppb) and 10 nM (2 ppb), respectively. The new material has been used to detect Hg2+ in aqueous real sample and Hg0 in soil sample.

Metal-coordination driven intramolecular twisting: a turn-on fluorescent-redox probe for Hg2+ ions through the interaction of ferrocene nonbonding orbitals and dibenzylidenehydrazine

A unique C2 symmetric azine bridged bi-ferrocenyl receptor has been designed and synthesized for the selective detection of Hg²⁺ ion with a low detection limit as 15 nM via turn on fluorescence with a blue shift.

Salmonella Typhimurium Sensing Strategy Based on the Loop-Mediated Isothermal Amplification Using Retroreflective Janus Particle as a Nonspectroscopic Signaling Probe

Loop-mediated isothermal amplification (LAMP) is a powerful gene amplification method, which has many advantages, including high specificity, sensitivity, and simple operation. However, quantitative analysis of the amplified target gene with the LAMP assay is very difficult. To overcome this limitation, we developed a novel biosensing platform for molecular diagnosis by integrating the LAMP method and retroreflective Janus particle (RJP) together. The final amplified products of the LAMP assay are dumbbell-shaped DNA structures, containing a single-stranded loop with two different sequences. Therefore, the concentration of the amplified products can be measured in a manner similar to the sandwich-type immunoassay. To carry out the sandwich-type molecular diagnostics using the LAMP product, two DNA probes, with complementary sequences to the loop-regions, were prepared and immobilized on both the sensing surface and the surface of the RJPs. When the amplified LAMP product was applied to the sensing surface, the surface-immobilized DNA probe hybridized to the loop-region of the LAMP product to form a double-stranded structure. When the DNA probe-conjugated RJPs were injected, the RJPs bound to the unreacted loop-region of the LAMP product. The number of RJPs bound to the loop-region of the LAMP product was proportional to the concentration of the amplified LAMP product, indicating that the concentration of the target gene can be quantitatively analyzed by counting the number of observed RJPs. Using the developed system, a highly sensitive and selective quantification of Salmonella was successfully performed with a detection limit of 10² CFU.

Ultrasensitive impedimetric mercury(II) sensor based on thymine-Hg(II)-thymine interaction and subsequent disintegration of multiple sandwich-structured DNA chains

An impedimetric method is described for ultrasensitive analysis of mercury(II). It is based on thymine-Hg(II)-thymine interaction which causes the disintegration of multiple-sandwich structured DNA chains. DNA strands were selected that are partially complementary to the T-rich Hg(II)-specific oligonucleotides (MSO). They were immobilized on a gold electrode via Au-S interaction. Next, the MSO and the bridging strands (BS) that can connect adjacent MSOs were alternately attached through layer-by-layer hybridization. Thus, a multiple-sandwich structured interface in created that carries numerous MSOs. This leads to a change-transfer resistance (R_ct) values of the electrode-electrolyte interface at faradic electrochemical impedance spectroscopy measurements in the presence of the hexacyanoferrate(II)/(III) redox probe at 0.2 V (vs. Ag/AgCl). If Hg(II) is added to the solution, the MSOs selectively interact with Hg(II) to produce T-Hg(II)-T structures. Hence, the multiple-sandwich hybridization chains become disintegrated, and this causes a decrease in resistivity. The effect can be used to quantify Hg(II) over an analytical range that extends over four orders of magnitude (1 fM to 10 pM), and it has a 0.16 fM limit of detection under optimal conditions. Graphical abstract An electrochemical sensor for femtomolar level detection of Hg²⁺ is realized on the basis of thymine-Hg²⁺-thymine interaction which causes disintegration of multiple sandwich DNA hybridization strands.

Practical Application of Aptamer-Based Biosensors in Detection of Low Molecular Weight Pollutants in Water Sources

Water pollution has become one of the leading causes of human health problems. Low molecular weight pollutants, even at trace concentrations in water sources, have aroused global attention due to their toxicity after long-time exposure. There is an increased demand for appropriate methods to detect these pollutants in aquatic systems. Aptamers, single-stranded DNA or RNA, have high affinity and specificity to each of their target molecule, similar to antigen-antibody interaction. Aptamers can be selected using a method called Systematic Evolution of Ligands by EXponential enrichment (SELEX). Recent years we have witnessed great progress in developing aptamer selection and aptamer-based sensors for low molecular weight pollutants in water sources, such as tap water, seawater, lake water, river water, as well as wastewater and its effluents. This review provides an overview of aptamer-based methods as a novel approach for detecting low molecular weight pollutants in water sources.