Nanomaterial-enhanced 3D-printed sensor platform for simultaneous detection of atrazine and acetochlor

Portable and Flexible Hydrogel Sensor for On-Site Atrazine Assay on Agricultural Products

There is growing attention focused toward the problems of ecological sustainability and food safety raised from the abuse of herbicides, which underscores the need for the development of a portable and reliable sensor for simple, rapid, and user-friendly on-site analysis of herbicide residues. Herein, a novel multifunctional hydrogel composite is explored to serve as a portable and flexible sensor for the facile and efficient analysis of atrazine (ATZ) residues. The hydrogel electrode is fabricated by doping graphite-phase carbon nitride (g-C3N4) into the aramid nanofiber reinforced poly(vinyl alcohol) hydrogel via a simple solution-casting procedure. Benefiting from the excellent electroactivity and large specific surface area of the solid nanoscale component, the prepared hydrogel sensor is capable of simple, rapid, and sensitive detection of ATZ with a detection limit down to 0.002 ng/mL and per test time less than 1 min. After combination with a smartphone-controlled portable electrochemical analyzer, the flexible sensor exhibited satisfactory analytical performance for the ATZ assay. We further demonstrated the applications of the sensor in the evaluation of the ATZ residues in real water and soil samples as well as the user-friendly on-site point-of-need detection of ATZ residues on various agricultural products. We envision that this flexible and portable sensor will open a new avenue on the development of next-generation analytical tools for herbicide monitoring in the environment and agricultural products.

Determination of acetochlor by UPLC-MS3 in cells and its application to a cellular pharmacokinetic study

The aim of this work was to develop a fast, simple, and reliable UPLC-MS3 method for the sensitive detection of acetochlor in biological samples. In MS3 mode, the ion transition m/z 270.1 → 224.1→148.1 was chosen for quantification with butachlor as the internal standard. In the UPLC system, separation was performed on a UPLC column (2.1 × 50 mm ID, 1.7 μm) with 0.1 % FA in water and acetonitrile as mobile phases. After simple protein precipitation via acetonitrile, the method was well validated with good linearity (0.5-20 ng/mL, r > 0.995), accuracy (-3.70 %-2.98 %), and precision (<15 %). The selectivity and sensitivity were improved obviously in MS3 mode than that in MRM mode. The developed UPLC-MS3 method was successfully applied to the cellular pharmacokinetics study of acetochlor in MCF-7 cells.

Paper as smart support for bioreceptor immobilization in electrochemical paper-based devices

The use of paper as a smart support in the field of electrochemical sensors has been largely improved over the last 15 years, driven by its outstanding features such as foldability and porosity, which enable the design of reagent and equipment-free multi-analysis devices. Furthermore, the easy surface engineering of paper has been used to immobilize different bioreceptors, through physical adsorption, covalent bonding, and electrochemical polymerization, boosting the fine customization of the analytical performances of paper-based biosensors. In this review, we focused on the strategies to engineer the surface of the paper for the immobilization of (bio)recognition elements (eg., enzymes, antibodies, DNA, molecularly imprinted polymers) with the overriding goal to develop accurate and reliable paper-based electrochemical biosensors. Furthermore, we highlighted how to take advantage of paper for designing smart configurations by integrating different analytical processes in an eco-designed analytical tool, starting from the immobilization of the (bio)receptor and the reagents, through a designed sample flow along the device, until the analyte detection.

A novel fluorescent aptasensor for the detection of theophylline based on cryonase-driven signal amplification strategy

In the study, we have developed an expedient and efficient method for the detection of theophylline based on the amplification of the signal intensity of fluorescence based on oxidized single-walled carbon nanohorns (oxSWCNHs)/cryonase. When theophylline was not present in the system, oxSWCNHs can adequately adsorb nucleic acid probes labeled by carboxyfluorescein (FAM). In the presence of theophylline, the nucleic acid probe forms the tertiary probe-theophylline complex, which detaches from the surface of the oxSWCNHs. Then, upon reaction with cryonase, the complex can release the FAM and theophylline into the next cycle. The fluorescence signal of the system exhibits a 1:N magnification, enabling quantitative detection of theophylline. The linear range was 30-150 ng/mL, and the limit of detection (LOD) was 6.04 ng/mL. At the same time, it can also be used to detect theophylline in mouse serum.

Artificial enzyme innovations in electrochemical devices: advancing wearable and portable sensing technologies

With the rapid evolution of sensing technologies, the integration of nanoscale catalysts, particularly those mimicking enzymatic functions, into electrochemical devices has surfaced as a pivotal advancement. These catalysts, dubbed artificial enzymes, embody a blend of heightened sensitivity, selectivity, and durability, laying the groundwork for innovative applications in real-time health monitoring and environmental detection. This minireview penetrates into the fundamental principles of electrochemical sensing, elucidating the unique attributes that establish artificial enzymes as foundational elements in this field. We spotlight a range of innovations where these catalysts have been proficiently incorporated into wearable and portable platforms. Navigating the pathway of amalgamating these nanoscale wonders into consumer-appealing devices presents a multitude of challenges; nevertheless, the progress made thus far signals a promising trajectory. As the intersection of materials science, biochemistry, and electronics progressively intensifies, a flourishing future seems imminent for artificial enzyme-infused electrochemical devices, with the potential to redefine the landscapes of wearable health diagnostics and portable sensing solutions.

Nanomaterial surface modification toolkit: Principles, components, recipes, and applications

Surface-functionalized nanostructures are at the forefront of biotechnology, providing new opportunities for biosensors, drug delivery, therapy, and bioimaging applications. The modification of nanostructures significantly impacts the performance and success of various applications by enabling selective and precise targeting. This review elucidates widely practiced surface modification strategies, including click chemistry, cross-coupling, silanization, aldehyde linkers, active ester chemistry, maleimide chemistry, epoxy linkers, and other protein and DNA-based methodologies. We also delve into the application-focused landscape of the nano-bio interface, emphasizing four key domains: therapeutics, biosensing, environmental monitoring, and point-of-care technologies, by highlighting prominent studies. The insights presented herein pave the way for further innovations at the intersection of nanotechnology and biotechnology, providing a useful handbook for beginners and professionals. The review draws on various sources, including the latest research articles (2018-2023), to provide a comprehensive overview of the field.

Glucose oxidase-like Co-MOF nanozyme-catalyzed self-powered sensor for sensitive detection of trace atrazine in complex environments

The self-powered sensor (SPS) is a sensor method that does not require the external power source and has the potential for portable detection of environmental contaminants. In this work, for the first time, a biomolecule-free SPS for detection of ultra-trace triazine endocrine disruptor atrazine (ATZ) with high sensitivity and selectivity is constructed using a glucose oxidase (GOD)-like cobalt metal-organic framework (Co-MOF) nanozyme-modified high-performance anode and a molecularly imprinted cathode. By modulating the size and morphology of the prepared materials, Co-MOF nanozyme with superior GOD-like property (Michaelis constant Km = 15.8 mM) has been obtained and modified at the anode to catalyze glucose oxidation with high efficiency and provide energy continuously and stably for the SPS. The separation mode of anodic energy supply-cathodic recognition ensures the recognition effect without affecting the catalytic characteristic of Co-MOF and the output signal of the SPS. The designed SPS has a wide linear range of 1 pM-100 nM and a detection limit as low as 0.65 pM, as well as superior selectivity and good stability. The present work provides a promising approach for the design of self-powered sensors which can be extended to detection of a wider range of environmental pollutants.

A lateral flow immunoassay method for the rapid detection of acetochlor and alachlor in vegetable oil by sensitivity enhancement by using dimethyl-β-cyclodextrin

Acetochlor is an endocrine disruptor. The acetochlor residue is strongly lipophilic and can be enriched into products during the manufacturing process. In this study, we found that dimethyl-β-cyclodextrin (DM-β-CD) solution could decrease the apparent oil/water partition coefficient (Koil-w) of acetochlor and increase the sensitivity of fluorescence lateral flow immunoassay (LFIA) for acetochlor simultaneously. Based on this, a simple LFIA method for the determination of acetochlor and alachlor residues in vegetable oil was established. The detection process only involves vortex mixing of an oil sample and dimethyl-β-cyclodextrin solution in a 1 : 3 (V/V) ratio, loading the water phase onto the immunoassay strips and reading the results. Under optimized conditions, the LOD for acetochlor in oil was 3.53 ng g-1, and the working range was 12.03-2000.00 ng g-1. The recoveries of spiked samples ranged from 91.69% ± 1.12% to 112.23% ± 2.20%. Meanwhile, the cross reactivity for alachlor was 108.22%, while for other investigated acetochlor analogues it was less than 1%, and the recoveries of alachlor were from 92.90% ± 8.03% to 113.53% ± 3.40%, which indicate that this method can detect acetochlor and alachlor simultaneously. Compared with the traditional detection method, the pre-treatment process of the proposed method is "green" and simple, and can be applied to the on-site rapid detection of acetochlor and alachlor in vegetable oil and can provide inspiration for the detection of other lipophilic pollutants.

Recent Advances in Nanozyme-Mediated Strategies for Pathogen Detection and Control

Pathogen detection and control have long presented formidable challenges in the domains of medicine and public health. This review paper underscores the potential of nanozymes as emerging bio-mimetic enzymes that hold promise in effectively tackling these challenges. The key features and advantages of nanozymes are introduced, encompassing their comparable catalytic activity to natural enzymes, enhanced stability and reliability, cost effectiveness, and straightforward preparation methods. Subsequently, the paper delves into the detailed utilization of nanozymes for pathogen detection. This includes their application as biosensors, facilitating rapid and sensitive identification of diverse pathogens, including bacteria, viruses, and plasmodium. Furthermore, the paper explores strategies employing nanozymes for pathogen control, such as the regulation of reactive oxygen species (ROS), HOBr/Cl regulation, and clearance of extracellular DNA to impede pathogen growth and transmission. The review underscores the vast potential of nanozymes in pathogen detection and control through numerous specific examples and case studies. The authors highlight the efficiency, rapidity, and specificity of pathogen detection achieved with nanozymes, employing various strategies. They also demonstrate the feasibility of nanozymes in hindering pathogen growth and transmission. These innovative approaches employing nanozymes are projected to provide novel options for early disease diagnoses, treatment, and prevention. Through a comprehensive discourse on the characteristics and advantages of nanozymes, as well as diverse application approaches, this paper serves as a crucial reference and guide for further research and development in nanozyme technology. The expectation is that such advancements will significantly contribute to enhancing disease control measures and improving public health outcomes.

Pd@Pt nanoparticle-linked immunosorbent assay for quantification of Collagen type II

The evaluation of specific protein content in engineered tissues provides a gateway for developing regenerative medicine treatments. Since collagen type II, the major component of articular cartilage, is critical for the blossoming field of articular cartilage tissue engineering, the interest in this protein is growing rapidly. Accordingly, the need for quantification of collagen type II is increasing as well. In this study, we provide recent results for a new quantifying nanoparticle sandwich immunoassay technique for collagen type II. Since mesoporous palladium@platinum (Pd@Pt) nanoparticles have peroxidase-like catalytic activities, these nanoparticles were utilized in an enzyme-linked immunosorbent assay (ELISA)-like format to circumvent the need for traditional enzymes. These nanoparticles were easily conjugated with anti-collagen type II antibodies by the natural affinity interaction and used to develop a direct sandwich ELISA-like format for nanoparticle-linked immunosorbent assays. Using this method, we obtained a limit of detection of 1 ng mL-1, a limit of quantification of 9 ng mL-1. and a broad linear range between 1 ng mL-1 and 50 μg mL-1 for collagen type II with an average relative standard deviation of 5.5%, useable over a pH range of 7 - 9 at least. The assay was successfully applied to quantify collagen type II in cartilage tissues and compared with the results of commercial ELISAs and gene expression by reverse transcription-quantitative polymerase chain reaction. This method provides a thermally stable and cost-efficient alternative to traditional ELISAs. It also extends the application of nanoparticle-linked immunosorbent assays, thereby providing the potential to quantify other proteins and apply the technology in the medical, environmental, and biotechnology industry fields.

A highly sensitive and selective photoelectrochemical aptasensor for atrazine based on Au NPs/3DOM TiO2 photonic crystal electrode

A photoelectrochemical (PEC) sensing platform with high sensitivity and selectivity has been fabricated based on Au nanoparticles (Au NPs) modified three dimensionally ordered macroporous (3DOM) TiO₂ nanostructure frame for trace detection of an endocrine disrupting pesticide, atrazine (ATZ). The resultant photoanode (Au NPs/3DOM TiO₂) shows enhanced PEC performance under visible light due to multi signal amplification of the unique structure of 3DOM TiO₂ and surface plasmon resonance (SPR) of Au NPs. ATZ aptamers are used as recognition elements and immobilized on Au NPs/3DOM TiO₂ by Au-S bond in large packing density and dominant spatial orientation. The specific recognition and high binding affinity between aptamer and ATZ provides the PEC aptasensor with excellent sensitivity. The detection limit is 0.167 ng/L. Besides, this PEC aptasensor exhibits outstanding anti-interference ability in 100-fold concentration of other endocrine disrupting compounds and has been applied successfully to analyze ATZ in real water samples. A simple but efficient PEC aptasensing platform has therefore been successfully developed with high sensitivity, selectivity and repeatability for pollutant monitoring and potential risk evaluation in the environment with great application prospect.

Semi-wrapped gold nanoparticles for surface-enhanced Raman scattering detection

Researchers have struggled to develop highly reliable and sensitive surface-enhanced Raman scattering (SERS) substrates for detecting compounds in complicated systems. In this work, a strategy by constructing Au cores with incompletely wrapped Prussian blue (PB) for highly reliable and sensitive SERS substrate is proposed. The wrapped PB layers can provide the internal standard (IS) to calibrate the SERS signal floatation, whereas the exposed surface of Au cores offers the enhancement effect. The balance between the signal self-calibration and enhancement (hence the trade-off between SERS reliability and sensitivity) is obtained by the approximate semi-wrapping configuration of PB layers on Au cores (i.e., SW-Au@PB). The proposed SW-Au@PB nanoparticles (NPs) exhibit the similar enhancement factor as the pristine Au NPs and contribute to the ultralow RSD (8.55%) of calibrated SERS signals using R6G as probe molecules. The simultaneously realized reliability and sensitivity of SW-Au@PB NPs also enables the detection of hazardous pesticide residues such as paraquat and thiram in herbal plants, with the average detection accuracy up to 92%. Overall, this work mainly provides a controllable synthetic strategy for incompletely wrapped NPs, and most importantly, explores the potential with a proof-of-concept practical application in accurate and sensitive Raman detection of hazardous substances with varying solubility.

Implementation of 3D printing technologies to electrochemical and optical biosensors developed for biomedical and pharmaceutical analysis

Three-dimensional (3D) printing technology has been applied in many areas. In recent years, new generation biosensorshave been emerged with the progress on 3D printing technology (3DPT) . Especially in the development of optical and electrochemical biosensors, 3DPT provides many advantages such as low cost, easy to manufacturing, being disposable and allow point of care testing. In this review, recent trends in the development of 3DPT based electrochemical and optical biosensors with their applications in the field of biomedical and pharmaceutical are examined. In addition, the advantages, disadvantages and future opportunities of 3DPT are discussed.

Occurrence, transport, and detection techniques of emerging pollutants in groundwater

Emerging pollutants (EPs) are a group of different contaminants, such as hormones, pesticides, heavy metals, and drugs, usually found in concentrations between the order of ng and µg per liter. The global population's daily city and agro-industrial activities release EPs into the environment.  Due to the chemical nature of EPs and deficient wastewater treatment and management, they are transported to superficial and groundwater through the natural water cycle, where they can potentially cause harmful effects on living organisms. Recent efforts have focused on developing technology that allows EPs quantification and monitoring in real-time and in situ. The newly developed technology aims to provide accessible groundwater management that detects and treats EPs while avoiding their contact with living beings and their toxic effects. This review presents some of the recently reported techniques that have been applied to advance the detection of EPs in groundwater and potential technologies that can be used for EP removal.

Application of 3D Printing Technology in Sensor Development for Water Quality Monitoring

The development of sensors for water quality monitoring is crucial to protect water quality, aquatic biota and human health. Traditional sensor manufacturing methods have significant drawbacks, such as low fabrication freedom, limited material choice and expensive manufacturing cost. As a possible alternative method, 3D printing technologies are increasingly popular in sensor development due to their high versatility, fast fabrication/modification, powerful processing of different materials and ease of incorporation with other sensor systems. Surprisingly, a systematic review examining the application of 3D printing technology in water monitoring sensors has not yet been conducted. Here, we summarized the development history, market share and advantages/disadvantages of typical 3D printing techniques. Specifically focused on the 3D-printed sensor for water quality monitoring, we then reviewed the applications of 3D printing in the development of sensors' supporting platform, cell, sensing electrode as well as all-3D-printed sensors. The fabrication materials and processing, and the sensor's performances regarding detected parameters, response time and detection limit/sensitivity, were also compared and analyzed. Finally, the current drawbacks of 3D-printed water sensors and potential directions for future study were discussed. This review will substantially promote the understanding of 3D printing technology used in water sensor development and benefit the protection of water resources.

Recent Advances in Electrochemical Biosensors for Monitoring Animal Cell Function and Viability

Redox reactions in live cells are generated by involving various redox biomolecules for maintaining cell viability and functions. These qualities have been exploited in the development of clinical monitoring, diagnostic approaches, and numerous types of biosensors. Particularly, electrochemical biosensor-based live-cell detection technologies, such as electric cell-substrate impedance (ECIS), field-effect transistors (FETs), and potentiometric-based biosensors, are used for the electrochemical-based sensing of extracellular changes, genetic alterations, and redox reactions. In addition to the electrochemical biosensors for live-cell detection, cancer and stem cells may be immobilized on an electrode surface and evaluated electrochemically. Various nanomaterials and cell-friendly ligands are used to enhance the sensitivity of electrochemical biosensors. Here, we discuss recent advances in the use of electrochemical sensors for determining cell viability and function, which are essential for the practical application of these sensors as tools for pharmaceutical analysis and toxicity testing. We believe that this review will motivate researchers to enhance their efforts devoted to accelerating the development of electrochemical biosensors for future applications in the pharmaceutical industry and stem cell therapeutics.

Recent Advances in the Immunoassays Based on Nanozymes

As a rapid and simple method for the detection of multiple targets, immunoassay has attracted extensive attention due to the merits of high specificity and sensitivity. Notably, enzyme-linked immunosorbent assay (ELISA) is a widely used immunoassay, which can provide high detection sensitivity since the enzyme labels can promote the generation of catalytically amplified readouts. However, the natural enzyme labels usually suffer from low stability, high cost, and difficult storage. Inspired by the advantages of superior and tunable catalytic activities, easy preparation, low cost, and high stability, nanozymes have arisen to replace the natural enzymes in immunoassay; they also possess equivalent sensitivity and selectivity, as well as robustness. Up to now, various kinds of nanozymes, including mimic peroxidase, oxidase, and phosphatase, have been incorporated to construct immunosensors. Herein, the development of immunoassays based on nanozymes with various types of detection signals are highlighted and discussed in detail. Furthermore, the challenges and perspectives of the design of novel nanozymes for widespread applications are discussed.

Ultrasensitive lateral flow immunoassay for staphylococcal enterotoxin B using nanosized fluorescent metal-organic frameworks

Owing to their outstanding optical properties and superior physical/chemical stability, dye-doped fluorescent nanoparticles (NPs) are growing exponentially as signal labels of immunochromatographic lateral flow immunoassay (LFA) for the detection of various analytes. However, the key challenge in the design of these fluorescent NPs is to confine the fluorophores inside NPs at extreme concentrations, at which dyes tend to self-quench resulting from the formation of non-fluorescent aggregates. Looking for other advantageous nanomaterials, we propose for the first time the use of a nanosized fluorescent metal-organic framework (nanoMOF) in LFA for the detection of staphylococcal enterotoxin B (SEB) as a model analyte. Featured by the chromophore assembly, the nanoMOF exhibited a high dye loading (∼60%) and strong fluorescence intensity, which was due to the reduced self-quenching of dyes in a variety of MOF matrices. The strong green fluorescence intensity of the nanoMOF gives a high contrast against the background of the strips and the sensitivity reflected by photoluminescence was improved by the enhanced antenna effect. Furthermore, due to the high surface area for antibody stemming, the limit of detection (LOD) of the MOF based LFA for SEB detection was as low as 0.025 ng mL^-1. The compatibility of the MOF based LFA with dairy samples and its stability under long-term storage conditions were also demonstrated. The integration of a nanoMOF into LFA to detect toxins could inspire the utilization of such nanomaterial-based labels in similar immunochromatographic testing methods to improve their performance.

Recent Advances in Rapid Detection Techniques for Pesticide Residue: A Review

As an important chemical pollutant affecting the safety of agricultural products, the on-site and efficient detection of pesticide residues has become a global trend and hotspot in research. These methodologies were developed for simplicity, high sensitivity, and multiresidue detection. This review introduces the currently available technologies based on electrochemistry, optical analysis, biotechnology, and some innovative and novel technologies for the rapid detection of pesticide residues, focusing on the characteristics, research status, and application of the most innovative and novel technologies in the past 10 years, and analyzes challenges and future development prospects. The current review could be a good reference for researchers to choose the appropriate research direction in pesticide residue detection.

Single-Atomic Site Catalyst Enhanced Lateral Flow Immunoassay for Point-of-Care Detection of Herbicide

Point-of-care (POC) detection of herbicides is of great importance due to their impact on the environment and potential risks to human health. Here, we design a single-atomic site catalyst (SASC) with excellent peroxidase-like (POD-like) catalytic activity, which enhances the detection performance of corresponding lateral flow immunoassay (LFIA). The iron single-atomic site catalyst (Fe-SASC) is synthesized from hemin-doped ZIF-8, creating active sites that mimic the Fe active center coordination environment of natural enzyme and their functions. Due to its atomically dispersed iron active sites that result in maximum utilization of active metal atoms, the Fe-SASC exhibits superior POD-like activity, which has great potential to replace its natural counterparts. Also, the catalytic mechanism of Fe-SASC is systematically investigated. Utilizing its outstanding catalytic activity, the Fe-SASC is used as label to construct LFIA (Fe-SASC-LFIA) for herbicide detection. The 2,4-dichlorophenoxyacetic acid (2,4-D) is selected as a target here, since it is a commonly used herbicide as well as a biomarker for herbicide exposure evaluation. A linear detection range of 1-250 ng/mL with a low limit of detection (LOD) of 0.82 ng/mL has been achieved. Meanwhile, excellent specificity and selectivity towards 2,4-D have been obtained. The outstanding detection performance of the Fe-SASC-LFIA has also been demonstrated in the detection of human urine samples, indicating the practicability of this POC detection platform for analyzing the 2,4-D exposure level of a person. We believe this proposed Fe-SASC-LFIA has potential as a portable, rapid, and high-sensitive POC detection strategy for pesticide exposure evaluation.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

On-site rapid and simultaneous detection of acetamiprid and fipronil using a dual-fluorescence lab-on-fiber biosensor

A dual-fluorescence lab-on-fiber biosensor was developed for the rapid and simultaneous on-site determination of acetamiprid and fipronil, based on time-resolved effect and indirect competitive immunoassay principle. The optical fiber modified with two hapten-protein conjugates serves as a bifunctional bio-probe. The dual-color fluorescent reporters were prepared via labeling acetamiprid and fipronil antibodies with Cy5.5 and Alexa Fluor 555, which were excited at 635-nm and 520-nm laser wavelengths, respectively. In the presence of targets, the binding sites of corresponding antibodies were occupied and less antibodies were connected to the probe surface, resulting in the reduction of fluorescence signal. The concentration of acetamiprid and fipronil was determined by measuring the fluorescence signals at 568 nm and 702 nm (emission wavelengths), respectively. Under optimal conditions, the linear response range was 14.2-225.4 ng/L for acetamiprid and 25.1-162.8 ng/L for fipronil, and the limit of detection was 6.51 ng/L and 17.8 ng/L for acetamiprid and fipronil, respectively. The method was successfully applied to the simultaneous detection of acetamiprid and fipronil in three environmental samples, and the recoveries were between 90 and 128%. The dual-fluorescence lab-on-fiber biosensor provides a feasible platform for simultaneous and rapid detection of multiple pesticide residues. A dual-fluorescence lab-on-fiber biosensor was developed for the rapid and simultaneous on-site determination of acetamiprid and fipronil. A bifunctional bio-probe was prepared from the optical fiber modified with two hapten-protein conjugates. Acetamiprid and fipronil antibodies were labeled with different fluorophores and used as dual-color fluorescent reporters.

Three-Dimensional (3D) Printing in Cancer Therapy and Diagnostics: Current Status and Future Perspectives

Three-dimensional (3D) printing is a technique where the products are printed layer-by-layer via a series of cross-sectional slices with the exact deposition of different cell types and biomaterials based on computer-aided design software. Three-dimensional printing can be divided into several approaches, such as extrusion-based printing, laser-induced forward transfer-based printing systems, and so on. Bio-ink is a crucial tool necessary for the fabrication of the 3D construct of living tissue in order to mimic the native tissue/cells using 3D printing technology. The formation of 3D software helps in the development of novel drug delivery systems with drug screening potential, as well as 3D constructs of tumor models. Additionally, several complex structures of inner tissues like stroma and channels of different sizes are printed through 3D printing techniques. Three-dimensional printing technology could also be used to develop therapy training simulators for educational purposes so that learners can practice complex surgical procedures. The fabrication of implantable medical devices using 3D printing technology with less risk of infections is receiving increased attention recently. A Cancer-on-a-chip is a microfluidic device that recreates tumor physiology and allows for a continuous supply of nutrients or therapeutic compounds. In this review, based on the recent literature, we have discussed various printing methods for 3D printing and types of bio-inks, and provided information on how 3D printing plays a crucial role in cancer management.

3D Printing Technologies in Biosensors Production: Recent Developments

Recent advances in 3D printing technologies and materials have enabled rapid development of innovative sensors for applications in different aspects of human life. Various 3D printing technologies have been adopted to fabricate biosensors or some of their components thanks to the advantages of these methodologies over the traditional ones, such as end-user customization and rapid prototyping. In this review, the works published in the last two years on 3D-printed biosensors are considered and grouped on the basis of the 3D printing technologies applied in different fields of application, highlighting the main analytical parameters. In the first part, 3D methods are discussed, after which the principal achievements and promising aspects obtained with the 3D-printed sensors are reported. An overview of the recent developments on this current topic is provided, as established by the considered works in this multidisciplinary field. Finally, future challenges on the improvement and innovation of the 3D printing technologies utilized for biosensors production are discussed.

A label-free electrochemical aptasensor based on platinum@palladium nanoparticles decorated with hemin-reduced graphene oxide as a signal amplifier for glypican-3 determination

An electrochemical aptasensor for highly sensitive detection of glypican-3 has been developed using the GPC3 aptamer as the biorecognition probe and H-rGO-Pt@Pd NPs as an electroactive reagent.

Multiple detection of 15 triazine herbicides by gold nanoparticle based-paper sensor

Triazine herbicides have been widely used in agriculture, but their residues can harm the environment and human health. To help monitor these, we have developed an effective immunochromatographic strip test that can simultaneously detect 15 different triazines in grain samples (including ametryn, cyprazine, atraton, prometon, prometryn, atrazine, propazine, terbuthylazine, simetryn, trietazine, secbumeton, simazine, desmetryn, terbumeton and simetone). Based on our optimization procedure, the visual limit of detection (vLOD) for these triazines was found to be 2-10 ng/mL in assay buffer, and 0.02-0.1 mg/kg in grain samples. Four different grain matrices including corn, brown rice, wheat, and sorghum were studied and the test results showed no significant differences between the 15 triazines analyzed using this method. This test is simple, convenient, rapid, and low-cost, and could be an effective tool for primary screening of triazine residues in grain samples.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material (UV-vis spectra of 15 nm-GNP; K₂CO₃ usage; cross reactivity; strip images for spiked rice, wheat and sorghum samples, UPLC-MS/MS parameters; gray values for strip optimization) is available in the online version of this article at 10.1007/s12274-022-4164-2.

Topographical Vacuum Sealing of 3D-Printed Multiplanar Microfluidic Structures

We demonstrate a novel way of creating three-dimensional microfluidic channels capable of following complex topographies. To this end, substrates with open channels and different geometries were 3D-printed, and the open channels were consecutively closed with a thermoplastic using a low-resolution vacuum-forming approach. This process allows the sealing of channels that are located on the surface of complex multiplanar topographies, as the thermoplastic aligns with the surface-shape (the macrostructure) of the substrate, while the microchannels remain mostly free of thermoplastic as their small channel size resists thermoplastic inflow. This new process was analyzed for its capability to consistently close different substrate geometries, which showed reliable sealing of angles >90°. Furthermore, the thermoplastic intrusion into channels of different widths was quantified, showing a linear effect of channel width and percentage of thermoplastic intrusion; ranging from 43.76% for large channels with 2 mm width to only 5.33% for channels with 500 µm channel width. The challenging sealing of substrate ‘valleys’, which are created when two large protrusions are adjacent to each other, was investigated and the correlation between protrusion distance and height is shown. Lastly, we present three application examples: a serpentine mixer with channels spun around a cuboid, increasing the usable surface area; a cuvette-inspired flow cell for a 2-MXP biosensor based on molecular imprinted polymers, fitting inside a standard UV/Vis-Spectrophotometer; and an adapter system that can be manufactured by one-sided injection molding and is self-sealed before usage. These examples demonstrate how this novel technology can be used to easily adapt microfluidic circuits for application in biosensor platforms.

Smartphone-Based Dual-Channel Immunochromatographic Test Strip with Polymer Quantum Dot Labels for Simultaneous Detection of Cypermethrin and 3-Phenoxybenzoic Acid

Currently, gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-MS (LC-MS) are the primary methods used to detect pesticides and their metabolites for biomonitoring of exposure. Although GC-MS and LC-MS can provide accurate and sensitive measurements, these techniques are not suitable for point-of-care or in-field biomonitoring applications. The objective of this work is to develop a smartphone-based dual-channel immunochromatographic test strip (ICTS) for on-site biomonitoring of exposure to cypermethrin by simultaneous detection of cypermethrin and its metabolite, 3-phenoxybenzoic acid (3-PBA). Polymer carbon dots (PCDs) with ultrahigh fluorescent brightness were synthesized and used as a signal amplifier in ICTS assay. Cypermethrin (a representative pyrethroid pesticide) and its major metabolite 3-PBA were simultaneously detected to provide more comprehensive analysis of cypermethrin exposure. After competitive immunoreactions between the target sample and the coating antigens preloaded on the test line, the tracer antibody (PCD-conjugated antibody) was quantitatively captured on the test lines. The captured PCDs were inversely proportional to the amount of the target compound in the sample. The red fluorescence on the test line was then recorded using a smartphone-based device capable of conducting image analysis and recording. Under optimal conditions, the sensor showed excellent linear responses for detecting cypermethrin and 3-PBA ranging from 1 to 100 ng/mL and from 0.1 to 100 ng/mL, respectively, and the limits of detection were calculated to be ∼0.35 ng/mL for cypermethrin and ∼0.04 ng/mL for 3-PBA. The results demonstrate that the ICTS device is promising for accurate point-of-care biomonitoring of pesticide exposure.

Modification of a nitrocellulose membrane with nanofibers for sensitivity enhancement in lateral flow test strips

Lateral-flow analysis (LFA) is a convenient, low-cost, and rapid detection method, which has been widely used for screening of diseases. However, sensitivity enhancement in LFA is still a focus in this field and remains challenging. Herein, we propose an electrospinning coating method to modify the conventional nitrocellulose (NC) membrane and optimize the liquid flow rate for enhancing the sensitivity of the NC based LFA strips in the detection of human chorionic gonadotropin (HCG) and luteinizing hormone (LH). It can be seen that coating the NC membrane with nitrocellulose fibers could obtain a NC based strip with HCG and LH detection limits of 0.22 and 0.36 mIU mL-1 respectively, and a quantitative linear range of 0.5-500 mIU mL-1. The results show that electrospinning is effective in modifying conventional NC membranes for LFA applications.

Ten Years of Lateral Flow Immunoassay Technique Applications: Trends, Challenges and Future Perspectives

The Lateral Flow Immunoassay (LFIA) is by far one of the most successful analytical platforms to perform the on-site detection of target substances. LFIA can be considered as a sort of lab-in-a-hand and, together with other point-of-need tests, has represented a paradigm shift from sample-to-lab to lab-to-sample aiming to improve decision making and turnaround time. The features of LFIAs made them a very attractive tool in clinical diagnostic where they can improve patient care by enabling more prompt diagnosis and treatment decisions. The rapidity, simplicity, relative cost-effectiveness, and the possibility to be used by nonskilled personnel contributed to the wide acceptance of LFIAs. As a consequence, from the detection of molecules, organisms, and (bio)markers for clinical purposes, the LFIA application has been rapidly extended to other fields, including food and feed safety, veterinary medicine, environmental control, and many others. This review aims to provide readers with a 10-years overview of applications, outlining the trends for the main application fields and the relative compounded annual growth rates. Moreover, future perspectives and challenges are discussed.

Nanobody-based immunosensing methods for safeguarding public health

Immunosensing methods are biosensing techniques based on specific recognition of an antigen-antibody immunocomplex, which have become commonly used in safeguarding public health. Taking advantage of antibody-related biotechnological advances, the utilization of an antigen-binding fragment of a heavy-chain-only antibody termed as 'nanobody' holds significant biomedical potential. Compared with the conventional full-length antibody, a single-domain nanobody retaining cognate antigen specificity possesses remarkable physicochemical stability and structural adaptability, which enables a flexible and efficient molecular design of the immunosensing strategy. This minireview aims to summarize the recent progress in immunosensing methods using nanobody targeting tumor markers, environmental pollutants, and foodborne microbes.