Detection of rare variant alleles using the AsCas12a double-stranded DNA trans-cleavage activity

On-Site and Visual Detection of the H5 Subtype Avian Influenza Virus Based on RT-RPA and CRISPR/Cas12a

Avian influenza viruses (AIVs) of the H5 subtype rank among the most serious pathogens, leading to significant economic losses in the global poultry industry and posing risks to human health. Therefore, rapid and accurate virus detection is crucial for the prevention and control of H5 AIVs. In this study, we established a novel detection method for H5 viruses by utilizing the precision of CRISPR/Cas12a and the efficiency of RT-RPA technologies. This assay facilitates the direct visualization of detection results through blue light and lateral flow strips, accurately identifying H5 viruses with high specificity and without cross-reactivity against other AIV subtypes, NDV, IBV, and IBDV. With detection thresholds of 1.9 copies/μL (blue light) and 1.9 × 103 copies/μL (lateral flow strips), our method not only competes with but also slightly surpasses RT-qPCR, demonstrating an 80.70% positive detection rate across 81 clinical samples. The RT-RPA/CRISPR-based detection method is characterized by high sensitivity, specificity, and independence from specialized equipment. The immediate field applicability of the RT-RPA/CRISPR approach underscores its importance as an effective tool for the early detection and management of outbreaks caused by the H5 subtype of AIVs.

"DSN-mismatched CRISPR″sensor for highly selective and sensitive detection of under-expressed miR-let-7a

Several microRNAs (miRNAs) are expressed at lower levels in specific tumors, e.g., miR-let-7a in non-small cell lung cancer (NSCLC). This makes it challenging to analyze their lower abundance versus specifically elevated miRNAs. Here, we describe a novel fluorescent biosensor for the highly selective and sensitive detection of miR-let-7a constructed by combining miRNA screening assisted by a duplex-specific nuclease (DSN) with CRISPR-Cas12a system signal amplification. We meticulously designed a mismatch in the first three to four bases at the 5'-end of the capture DNA to improve the signal-to-noise ratio of the CRISPR-Cas12a system. Within this "DSN-mismatched CRISPR" fluorescence strategy, miR-let-7a was accurately screened by DSN-assisted cleavage, and the mismatched capture DNA unbound to target miRNA could trigger the CRISPR-Cas12a system to produce a mass of trans-cleave fluorescence signals. This "turn-off" approach was suitable for detecting decreased levels of miRNAs. This approach can not only discriminate the single-base mismatched let-7 family but also reach a limit of detection at 64.17 fM as well as be quantified from 100 fM to 500 pM. The miR-let-7a levels were then measured in clinical serum samples from healthy volunteers and patients with NSCLC. This study holds promise for the development of a universal under-expressed miRNA assay for early diagnosis and treatment of cancers.

DNA Robots for CRISPR/Cas12a Activity Management and Universal Platforms for Biosensing

The CRISPR/Cas12a system is a revolutionary genome editing technique that is widely employed in biosensing and molecular diagnostics. However, there are few reports on precisely managing the trans-cleavage activity of Cas12a by simple modification since the traditional methods to manage Cas12a often require difficult and rigorous regulation of core components. Hence, we developed a novel CRISPR/Cas12a regulatory mechanism, named DNA Robots for Enzyme Activity Management (DREAM), by introducing two simple DNA robots, apurinic/apyrimidinic site (AP site) or nick on target activator. First, we revealed the mechanism of how the DREAM strategy precisely regulated Cas12a through different binding affinities. Second, the DREAM strategy was found to improve the selectivity of Cas12a for identifying base mismatch. Third, a modular biosensor for base excision repair enzymes based on the DREAM strategy was developed by utilizing diversified generation ways of DNA robots, and a multi-signal output platform such as fluorescence, colorimetry, and visual lateral flow strip was constructed. Furthermore, we extended logic sensing circuits to overcome the barrier that Cas12a could not detect simultaneously in a single tube. Overall, the DREAM strategy not only provided new prospects for programmable Cas12a biosensing systems but also enabled portable, specific, and humanized detection with great potential for molecular diagnostics.

CRISPR/Cas12-based electrochemical biosensors for clinical diagnostic and food monitoring

Each organism has a unique sequence of nitrogenous bases in in the form of DNA or RNA which distinguish them from other organisms. This characteristic makes nucleic acid-based detection extremely selective and compare to other molecular techniques. In recent years, several nucleic acid-based detection technology methods have been developed, one of which is the electrochemical biosensor. Electrochemical biosensors are known to have high sensitivity and accuracy. In addition, the ease of miniaturization of this electrochemical technique has garnered interest from many researchers. On the other hand, the CRISPR/Cas12 method has been widely used in detecting nucleic acids due to its highly selective nature. The CRISPR/Cas12 method is also reported to increase the sensitivity of electrochemical biosensors through the utilization of modified electrodes. The electrodes can be modified according to detection needs so that the biosensor's performance can be improved. This review discusses the application of CRISPR/Cas12-based electrochemical biosensors, as well as various electrode modifications that have been successfully used to improve the performance of these biosensors in the clinical and food monitoring fields.

CoLAMP: CRISPR-based one-pot loop-mediated isothermal amplification enables at-home diagnosis of SARS-CoV-2 RNA with nearly eliminated contamination utilizing amplicons depletion strategy

Rapid point-of-care diagnostics, essential in settings such as airport on-site testing and home-based screening, displayed important implications for infectious disease control during the SARS-CoV-2 outbreak. However, the deployment of simple and sensitive assays in real-life scenarios still faces the concern of aerosol contamination. Here, we report an amplicon-depleting CRISPR-based one-pot loop-mediated isothermal amplification (CoLAMP) assay for point-of-care diagnosis of SARS-CoV-2 RNA. In this work, AapCas12b sgRNA is designed to recognize the activator sequence sited in the loop region of the LAMP product, which is crucial for exponential amplification. By destroying the aerosol-prone amplifiable products at the end of each amplification reaction, our design can significantly reduce the amplicons contamination that causes false positive results in point-of-care diagnostics. For at-home self-testing, we designed a low-cost sample-to-result device for fluorescence-based visual interpretation. As well, a commercial portable electrochemical platform was deployed as a proof-of-concept of ready-to-use point-of-care diagnostic systems. The field deployable CoLAMP assay can detect as low as 0.5 copies/μL of SARS-CoV-2 RNA in clinical nasopharyngeal swab samples within 40 min without the need for specialists for its operation.

Two CRISPR/Cas12a-based methods for fast and accurate detection of single-base mutations

Current single-base mutation detection approaches are time-consuming, labor-intensive, and costly. This highlights the critical need for speedy and accurate technology capable of detecting single-base alterations. Using clustered regularly interspaced short palindromic repeats/associated protein 12a (CRISPR/Cas12a), two fundamental approaches for getting 100% differentiation of single-base mutations have been established, by which fluorescence signals could be detected for variants but not for wild strains. The first method required both polymerase chain reaction (PCR) and CRISPR/Cas12a cleavage: By introducing a mismatched base at the 3' end of the primers and adjusting the PCR settings, the wild strain strand amplifications were completely blocked prior to CRISPR/Cas12a cleavage. The parameters for Method 1 (PCR + CRISPR/Cas12a) could be easily controlled and adjusted to attain a sensitivity of one copy (about 6 copies μL-1). The second method included isothermal recombinase polymerase amplification (RPA) and CRISPR/Cas12a cleavage: By introducing an extra mismatched base adjacent to the single-base mutant site by RPA (IMAS-RPA), the RPA products from the wild strains were rendered incapable of triggering the cleavage activity of CRISPR/Cas12a. Method 2 (IMAS-RPA) was rapid and easy to implement (can be finished within 1 h). Because each method has its own set of advantages, the laboratory environment-appropriate methods can be selected independently. Both approaches are expected to aid in clinical diagnosis to some extent in the near future.

A universal and sensitive gene mutation detection method based on CRISPR-Cas12a

Single nucleotide mutations are highly related to the occurrence and development of cancer. The development of simple single nucleotide mutation detection methods with high sensitivity and specificity has great clinical significance for the prevention, diagnosis, treatment and prognosis evaluation of cancer. In recent years, CRISPR/Cas12a has been developed as a highly sensitive, simple and fast tool for nucleic acid detection. However, the specificity and universality of current detection methods based on it are still insufficient, so their clinical applications are limited. Herein, we developed a simple and rapid single nucleotide mutation detection method based on CRISPR/Cas12a system. This method not only solves the problem of PAM sequence restriction of CRISPR/Cas12a, but also significantly improves the specificity of CRISPR/Cas12a for single nucleotide mutation and greatly improves the sensitivity. We detected three clinically significant mutations, PTEN R130Q, BRAF V600E, and TP53 R248W, with a detection limit of 0.1%. Finally, we further verified the clinical practicability of this method. We selected TP53 R248W mutation site for testing. The accuracy of testing results for 10 clinical samples was as high as 100%. In conclusion, the detection method of specific PCR combined with CRISPR/Cas12a is simple, rapid, universal and highly sensitive. We believe that this method has promising application prospects in clinical diagnosis of cancer.

Electrochemical biosensors for analysis of DNA point mutations in cancer research

Cancer is a genetic disease induced by mutations in DNA, in particular point mutations in important driver genes that lead to protein malfunctioning and ultimately to tumorigenesis. Screening for the most common DNA point mutations, especially in such genes as TP53, BRCA1 and BRCA2, EGFR, KRAS, or BRAF, is crucial to determine predisposition risk for cancer or to predict response to therapy. In this review, we briefly depict how these genes are involved in cancer, followed by a description of the most common techniques routinely applied for their analysis, including high-throughput next-generation sequencing technology and less expensive low-throughput options, such as real-time PCR, restriction fragment length polymorphism, or high resolution melting analysis. We then introduce benefits of electrochemical biosensors as interesting alternatives to the standard methods in terms of cost, speed, and simplicity. We describe most common strategies involved in electrochemical biosensing of point mutations, relying mostly on PCR or isothermal amplification techniques, and critically discuss major challenges and obstacles that, until now, prevented their more widespread application in clinical settings.

Review of CRISPR/Cas Systems on Detection of Nucleotide Sequences

Nowadays, with the rapid development of biotechnology, the CRISPR/Cas technology in particular has produced many new traits and products. Therefore, rapid and high-resolution detection methods for biotechnology products are urgently needed, which is extremely important for safety regulation. Recently, in addition to being gene editing tools, CRISPR/Cas systems have also been used in detection of various targets. CRISPR/Cas systems can be successfully used to detect nucleic acids, proteins, metal ions and others in combination with a variety of technologies, with great application prospects in the future. However, there are still some challenges need to be addressed. In this review, we will list some detection methods of genetically modified (GM) crops, gene-edited crops and single-nucleotide polymorphisms (SNPs) based on CRISPR/Cas systems, hoping to bring some inspiration or ideas to readers.

A versatile CRISPR/Cas12a-based biosensing platform coupled with a target-protected transcription strategy

Besides the critical role in gene editing, CRISPR/Cas system also brings a new signal amplification mechanism to the development of next generation biosensing technologies. Herein, we have developed a versatile CRISPR/Cas12a sensing platform by combining a target protection-based transcription amplification strategy with the Cas12a-based signal amplification mechanism, which allows for the sensitive detection of both nucleic acid and non-nucleic acid targets. In this design, a rationally designed transcription template sequence is able to avoid Exonuclease I (Exo I) degradation only in the existence of the target-mediated binding events including either nucleic acid hybridization or protein-based affinity interactions. This target binding-induced protection effect can facilitate the subsequent transcription amplification to generate crRNA and activate the subsequent Cas12a trans-cleavage signal amplification mechanism to yield target dosage-responsive fluorescence signal. In contrast, if the target is absent, the protection-free transcription template will be completely digested by Exo I, thus no fluorescence response is produced. This new strategy well eliminates the T7 polymerase-associated non-specific transcription background and realizes the sensitive detection of various kinds of biomolecules including microRNA, protein, as well as exosome, broadening the application scenarios of CRISPR/Cas system in the field of bioanalysis and biosensing.

A PAM-free CRISPR/Cas12a ultra-specific activation mode based on toehold-mediated strand displacement and branch migration

CRISPR (clustered regularly interspaced short palindromic repeats) technology has achieved great breakthroughs in terms of convenience and sensitivity; it is becoming the most promising molecular tool. However, only two CRISPR activation modes (single and double stranded) are available, and they have specificity and universality bottlenecks that limit the application of CRISPR technology in high-precision molecular recognition. Herein, we proposed a novel CRISPR/Cas12a unrestricted activation mode to greatly improve its performance. The new mode totally eliminates the need for a protospacer adjacent motif and accurately activates Cas12a through toehold-mediated strand displacement and branch migration, which is highly universal and ultra-specific. With this mode, we discriminated all mismatch types and detected the EGFR T790M and L858R mutations in very low abundance. Taken together, our activation mode is deeply incorporated with DNA nanotechnology and extensively broadens the application boundaries of CRISPR technology in biomedical and molecular reaction networks.

Novel Detection Method for Circulating EGFR Tumor DNA Using Gravitationally Condensed Gold Nanoparticles and Catalytic Walker DNA

The detection of circulating tumor DNA is a major challenge in liquid biopsies for cancer. Conventionally, quantitative polymerase chain reactions or next-generation sequencing are used to detect circulating tumor DNA; however, these techniques require significant expertise, and are expensive. Owing to the increasing demand for a simple diagnostic method and constant monitoring of cancer, a cost-effective detection technique that can be conducted by non-experts is required. The aim of this study was to detect the circulating tumor DNA containing the epidermal growth factor receptor (EGFR) exon 19 deletion, which frequently occurs in lung cancer. By applying walker DNA to a catalytic hairpin assembly and using the differential dispersibility of gold nanoparticles, we detected EGFR exon 19 deletion mutant #2 DNA associated with lung cancer. Our sensing platform exhibited a limit of detection of 38.5 aM and a selectivity of 0.1% for EGFR exon 19 wild-type DNA. Moreover, we tested and compared EGFR exon 19 deletion mutants #1 and #3 to evaluate the effect of base pair mismatches on the performance of the said technique.

Rapid and accurate detection of SARS-CoV-2 mutations using a Cas12a-based sensing platform

The increasing prevalence of SARS-CoV-2 variants with spike mutations has raised concerns owing to higher transmission rates, disease severity, and escape from neutralizing antibodies. Rapid and accurate detection of SARS-CoV-2 variants provides crucial information concerning the outbreaks of SARS-CoV-2 variants and possible lines of transmission. This information is vital for infection prevention and control. We used a Cas12a-based RT-PCR combined with CRISPR on-site rapid detection system (RT-CORDS) platform to detect the key mutations in SARS-CoV-2 variants, such as 69/70 deletion, N501Y, and D614G. We used type-specific CRISPR RNAs (crRNAs) to identify wild-type (crRNA-W) and mutant (crRNA-M) sequences of SARS-CoV-2. We successfully differentiated mutant variants from wild-type SARS-CoV-2 with a sensitivity of 10⁻¹⁷ M (approximately 6 copies/μL). The assay took just 10 min with the Cas12a/crRNA reaction after a simple RT-PCR using a fluorescence reporting system. In addition, a sensitivity of 10⁻¹⁶ M could be achieved when lateral flow strips were used as readouts. The accuracy of RT-CORDS for SARS-CoV-2 variant detection was 100% consistent with the sequencing data. In conclusion, using the RT-CORDS platform, we accurately, sensitively, specifically, and rapidly detected SARS-CoV-2 variants. This method may be used in clinical diagnosis.

Rapid and Specific Detection of Active SARS-CoV-2 With CRISPR/Cas12a

Rapid and sensitive nucleic acid detection of SARS-CoV-2 has contributed to the clinical diagnosis and control of COVID-19. Although detection of virus genomic RNA (gRNA) has been commonly used in clinical diagnosis, SARS-CoV-2 gRNA detection could not discriminate between active infectious virus with remnant viral RNA. In contrast to genomic RNA, subgenomic RNAs (sgRNAs) are only produced when the virus is actively replicating and transcription, detection of sgRNA could be an indication to evaluate infectivity. CRISPR/Cas-based nucleic acid detection methods have been considered potential diagnostic tools due to their intrinsic sensitivity, specificity and simplicity. In this study, to specifically detect active virus replication, we developed a CRISPR-based active SARS-CoV-2 (CRISPR-actCoV) detection strategy by detecting sgRNAs of SARS-CoV-2. CRISPR-actCoV with CRISPR Cas12a-assisted fluorescence reporter system enables detection of sgRNAs at 10 copies in 35 min with high specificity and can be read out with naked eyes. Further, we performed CRISPR-actCoV mediated sgRNA detection in 30 SARS-CoV-2 potentially infected clinical samples, and 21 samples were SARS-CoV-2 sgRNA positive. A quantitative RT-PCR assay was also performed to detect gRNA of SARS-CoV-2 in parallel. Among the 30 clinical samples, 27 samples were gRNA positive. Taken together, CRISPR-actCoV provides an alternative for rapid and accurate detection of active SARS-CoV-2 and has great significance in better response of coronavirus causing epidemic disease.