Simultaneous detection of dual biomarkers using hierarchical MoS2 nanostructuring and nano-signal amplification-based electrochemical aptasensor toward accurate diagnosis of prostate cancer

Surface Engineering Magnetic Nanoparticles with Redox and Biological Properties

Magnetic nanoparticles (MNPs) are recognized as valuable tools for derived electrochemical biosensors and offer immense potential for the efficient diagnosis and detection of disease biomarkers. Herein, a new step-by-step approach for the development of multifunctional MNPs that exhibit both redox and biological properties is described. First, chemical cross-linking was employed to label these MNPs with redox dyes (ferrocene, anthraquinone, or methylene blue). Bovine serum albumin (BSA) was then applied as the terminal protective layer. Next, click chemistry was employed to engineer immunoglobulin G (IgG) onto the surface of these redox MNPs (IgG number of 35 ± 8 per MNP), providing multifunctionality. Before and after surface engineering, these MNPs exhibited high-quality size distributions, as characterized by differential centrifugal sedimentation (DCS). Square-wave voltammetry was used to reveal the presence of 21.8 ± 1.3 ferrocene molecules on each anti-CD63-based redox MNP, and the anti-CD63 antibodies still maintained their bioactivity toward the CD63 antigen. These multifunctional MNPs could be promising tools for advancing the development of MNP-assisted electrochemical biosensors and meeting the needs of single-nanoparticle electrochemistry.

Nanotechnology in prostate cancer: a bibliometric analysis from 2004 to 2023

BACKGROUND

Prostate cancer (PC) contributes to male mortality worldwide. The objective of this study is to comprehensively depict the scientific accomplishments and research trends in nanotechnology for PC applications.

METHODS

Utilizing the Web of Science Core Collection database, publications were gathered on the basis of inclusion and selection criteria. The publications were analyzed and visualized using VOSviewer, R-studio and CiteSpace software tools.

RESULTS

A total of 1949 studies were incorporated. Farokhzad was the most productive author. The United States and China released 58.13% of the total publications. The Chinese Academy of Sciences was the most influential institution, and the International Journal of Nanomedicine stood out as a prominent journal in this field. The most frequently referenced publication and research subject category were identified. The most extensively investigated area was nanoparticle-based drug delivery, while recent research has focused on anticancer with novel nanocarriers.

CONCLUSION

A bibliometric analysis in the PC and nanotechnology was conducted between 2004 and 2023. The overview and characteristics of the publications were identified. We discussed the application and restrictions faced by nanotechnology in PC management. The study of nanotechnology in PC treatment needs to be further studied.

Research Progress on Chemiresistive Carbon Monoxide Sensors

The development of high-performance carbon monoxide (CO) sensors is essential for protecting human health, ensuring industrial safety, and maintaining environmental well-being. Among various types of sensors, chemiresistive sensors exhibit considerable promise for real-time applications due to their operational capabilities. To achieve high performances of chemiresistive sensors, this review emphasizes various enhancement strategies, encompassing the refinement of sensing materials, the augmentation of sensor structures, and the optimization of gas recognition algorithms. Specifically, the modification techniques of sensing materials, which include the construction of heterostructures, the decoration with noble metals, surface functionalization, hetero-element-doping, and morphology engineering, are delved into comprehensively. This review provides insights into the rational design of cost-effective CO sensors.

Efficiency of electrochemical immuno- vs. apta(geno)sensors for multiple cancer biomarkers detection

The interest in biosensors technology has been constantly growing over the last few years. It is still the biggest challenge to design biosensors able to detect two or more analytes in a single measurement. Electrochemical methods are frequently used for this purpose, mainly due to the possibility of applying two or more different redox labels characterized by independent and distinguished electrochemical signals. In addition to antibodies, nucleic acids (aptamers) have been increasingly used as bioreceptors in the construction of such sensors. Within this review paper, we have collected the examples of electrochemical immuno- and geno(apta)sensors for simultaneous detection of multiple analytes. Based on many published literature examples, we have emphasized the recent application of multiplexed platforms for detection of cancer biomarkers. It has allowed us to compare the progress in design strategies, including novel nanomaterials and amplification of signals, to get as low as possible limits of detection. We have focused on multi-electrode and multi-label strategies based on redox-active labels, such as ferrocene, anthraquinone, methylene blue, thionine, hemin and quantum dots, or metal ions such as Ag+, Pb2+, Cd2+, Zn2+, Cu2+ and others. We have finally discussed the possible way of development, challenges and prospects in the area of multianalyte electrochemical immuno- and geno(apta)sensors.

Electrochemical Biosensors for Cancer Diagnosis: Multitarget Analysis to Present Molecular Characteristics of Tumor Heterogeneity

Electrochemical biosensors are gaining attention as powerful tools in cancer diagnosis, particularly in liquid biopsy, due to their high efficiency, rapid response, exceptional sensitivity, and specificity. However, the complexity of intra- and intertumor heterogeneity, with variations in genetic and protein expression profiles and epigenetic modifications, makes electrochemical biosensors susceptible to false-positive or false-negative diagnostic outcomes. To address this challenge, there is growing interest in simultaneously analyzing multiple biomarkers to reveal molecular characteristics of tumor heterogeneity for precise cancer diagnosis. In this Perspective, we highlight recent advancements in utilizing electrochemical biosensors for cancer diagnosis, with a specific emphasis on the multitarget analysis of cancer biomarkers including tumor-associated nucleic acids, tumor protein markers, extracellular vesicles, and tumor cells. These biosensors hold significant promise for improving precision in early cancer diagnosis and monitoring, as well as potentially offering new insights into personalized cancer management.

DNA Nanomaterial-Based Electrochemical Biosensors for Clinical Diagnosis

Sensitive and quantitative detection of chemical and biological molecules for screening, diagnosis and monitoring diseases is essential to treatment planning and response monitoring. Electrochemical biosensors are fast, sensitive, and easy to miniaturize, which has led to rapid development in clinical diagnosis. Benefiting from their excellent molecular recognition ability and high programmability, DNA nanomaterials could overcome the Debye length of electrochemical biosensors by simple molecular design and are well suited as recognition elements for electrochemical biosensors. Therefore, to enhance the sensitivity and specificity of electrochemical biosensors, significant progress has been made in recent years by optimizing the DNA nanomaterials design. Here, the establishment of electrochemical sensing strategies based on DNA nanomaterials is reviewed in detail. First, the structural design of DNA nanomaterial is examined to enhance the sensitivity of electrochemical biosensors by improving recognition and overcoming Debye length. In addition, the strategies of electrical signal transduction and signal amplification based on DNA nanomaterials are reviewed, and the applications of DNA nanomaterial-based electrochemical biosensors and integrated devices in clinical diagnosis are further summarized. Finally, the main opportunities and challenges of DNA nanomaterial-based electrochemical biosensors in detecting disease biomarkers are presented in an aim to guide the design of DNA nanomaterial-based electrochemical devices with high sensitivity and specificity.

The LOD paradox: When lower isn't always better in biosensor research and development

Biosensor research has long focused on achieving the lowest possible Limits of Detection (LOD), driving significant advances in sensitivity and opening up new possibilities in analysis. However, this intense focus on low LODs may not always meet the practical needs or suit the actual uses of these devices. While technological improvements are impressive, they can sometimes overlook important factors such as detection range, ease of use, and market readiness, which are vital for biosensors to be effective in real-world applications. This review advocates for a balanced approach to biosensor development, emphasizing the need to align technological advancements with practical utility. We delve into various applications, including the detection of cancer biomarkers, pathology-related biomarkers, and illicit drugs, illustrating the critical role of LOD within these contexts. By considering clinical needs and broader design aspects like cost-effectiveness, sustainability, and regulatory compliance, we argue that integrating technical progress with practicality will enhance the impact of biosensors. Such an approach ensures that biosensors are not only technically sound but also widely useable and beneficial in real-world applications. Addressing the diverse analytical parameters alongside user expectations and market demands will likely maximize the real-world impact of biosensors.

Development of transition metal oxide platforms for aptasensing of PSA in cell cultures

In this study, a novel aptasensor based on a transition metal oxide-modified pencil graphite electrode (PGE) was developed for the diagnosis of early-stage prostate cancer (PCa) via monitoring the prostate-specific antigen (PSA), which is the main biomarker for PCa. Single-use PGEs modified with pulsed deposited manganese oxide (MnOx) film were used to attach the amino-terminated aptamer specific to the PSA via carbodiimide chemistry. The designed aptasensor was placed in an electrochemical cell containing ferri/ferrocyanide ions as a redox probe to measure the charge transfer resistances (Rct) of the electrode surface by electrochemical impedance spectroscopy (EIS) to follow the response of each modification step. The effect of the medium pH on the ionic structure of the aptamer molecule according to its pI value and, thus, the reversing of the direction of the response (ΔRct) by the pH change was also discussed. The level of PSA secreted from PCa cells was investigated using impedimetric transduction. The specificity of the aptasensor was validated through selectivity studies against non-specific tumor markers like VEGF and different cancer cell lines including breast cancer and androgen-insensitive prostate cancer. The developed system showcases a label-free, fast, specific, and cost-effective approach for PSA detection, highlighting the importance of medium pH and the electrostatic environment on the aptamer's response. Our work emphasizes the potential for such aptasensors in clinical diagnostics and paves the way for further exploration into using transition metal oxides in biosensing applications.

Nanobiosensors based on on-site detection approaches for rapid pesticide sensing in the agricultural arena: A systematic review of the current status and perspectives

The extensive use of chemical pesticides has significantly boosted agricultural food crop yields. Nevertheless, their excessive and unregulated application has resulted in food contamination and pollution in environmental, aquatic, and agricultural ecosystems. Consequently, the on-site monitoring of pesticide residues in agricultural practices is paramount to safeguard global food and conservational safety. Traditional pesticide detection methods are cumbersome and ill-suited for on-site pesticide finding. The systematic review provides an in-depth analysis of the current status and perspectives of nanobiosensors (NBS) for pesticide detection in the agricultural arena. Furthermore, the study encompasses the fundamental principles of NBS, the various transduction mechanisms employed, and their incorporation into on-site detection platforms. Conversely, the assortment of transduction mechanisms, including optical, electrochemical, and piezoelectric tactics, is deliberated in detail, emphasizing its advantages and limitations in pesticide perception. Incorporating NBS into on-site detection platforms confirms a vital feature of their pertinence. The evaluation reflects the integration of NBS into lab-on-a-chip systems, handheld devices, and wireless sensor networks, permitting real-time monitoring and data-driven decision-making in agronomic settings. The potential for robotics and automation in pesticide detection is also scrutinized, highlighting their role in improving competence and accuracy. Finally, this systematic review provides a complete understanding of the current landscape of NBS for on-site pesticide sensing. Consequently, we anticipate that this review offers valuable insights that could form the foundation for creating innovative NBS applicable in various fields such as materials science, nanoscience, food technology and environmental science.

Simultaneous detection of breast cancer biomarkers circROBO1 and BRCA1 based on a CRISPR-Cas13a/Cas12a system

Breast cancer is reported to be one of the most lethal cancers in women, and its multi-target detection can help improve the accuracy of diagnosis. In this work, a cluster regularly interspaced short palindromic repeats (CRISPR)-Cas13a/Cas12a-based system was established for the simultaneous fluorescence detection of breast cancer biomarkers circROBO1 and BRCA1. CRISPR-Cas13a and CRISPR-Cas12a were directly activated by their respective targets, resulting in the cleavage of short RNA and DNA reporters, respectively, thus the signals of 6-carboxyfluorescein (FAM) and 6-carboxy-xrhodamine (ROX) were restored. As the fluorescence intensities of FAM and ROX were dependent on the concentrations of circROBO1 and BRCA1, respectively, synchronous fluorescence scanning could achieve one-step detection of circROBO1 and BRCA1 with detection limits of 0.013 pM and 0.26 pM, respectively. The system was highly sensitive and specific, holding high diagnostic potential for the detection of clinical samples. Furthermore, the competing endogenous RNA mechanism between circROBO1 and BRCA1 was also explored, providing a reliable basis for the intrinsic regulatory mechanism of breast cancer.

Ionic liquid-enhanced silica aerogels for the specific extraction and detection of aflatoxin B1 coupled with a smartphone-based colorimetric biosensor

The polymer ionic liquid (1-allyl-3-butylimidazolium bromide) enhanced silica aerogel was modified onto the surface of stainless-steel mesh to immobilize aptamer-1 for the specific recognition of AFB1. The porous channels of silica aerogel could prevent the interference of macromolecules in food samples. Enzyme kinetic analysis showed that the MoS2/Au was an effective peroxidase mimic with a relatively low Michaelis constant (Km) value of 0.17 mM and a high catalytic rate of 3.87 × 10-8 mol (L·s)-1, which exhibited obvious superiority compared with horseradish peroxidase. The established "sandwich-structure" biosensor was coupled with the smartphone "Color Picker" application was used to detect AFB1 with a wide linear range (1-100 ng mL-1) and low detection limit (0.25 ng mL-1). The anti-interference ability of the established biosensor was evaluated by adding different concentrations of standards in corn, peanut, and wheat and matrix effects were 90.84-106.11 %. The results showed that this method demonstrated high specificity, sensitivity, rapidity and low interference in food samples.

A review on magnetic beads-based SELEX technologies: Applications from small to large target molecules

This review summarizes the stepwise strategy and key points for magnetic beads (MBs)-based aptamer selection which is suitable for isolating aptamers against small and large molecules via systematic evolution of ligands by exponential enrichment (SELEX). Particularities, if any, are discussed according to the target size. Examples targeting small molecules (<1000 Da) such as xenobiotics, toxins, pesticides, herbicides, illegal additives, hormones, and large targets such as proteins (biomarkers, pathogens) are discussed and presented in tabular formats. Of special interest are the latest advances in more efficient alternatives, which are based on novel instrumentation, materials or microelectronics, such as fluorescence MBs-SELEX or microfluidic chip system-assisted MBs-SELEX. Limitations and perspectives of MBs-SELEX are also reviewed. Taken together, this review aims to provide practical insights into MBs-SELEX technologies and their ability to screen multiple potential aptamers against targets from small to large molecules.

Recent progress in MoS2 nanostructures for biomedical applications: Experimental and computational approach

In the category of 2D materials, MoS2 a transition metal dichalcogenide, is a novel and intriguing class of materials with interesting physicochemical properties, explored in applications ranging from cutting-edge optoelectronic to the frontiers of biomedical and biotechnology. MoS2 nanostructures an alternative to heavy toxic metals exhibit biocompatibility, low toxicity and high stability, and high binding affinity to biomolecules. MoS2 nanostructures provide a lot of opportunities for the advancement of novel biosensing, nanodrug delivery system, electrochemical detection, bioimaging, and photothermal therapy. Much efforts have been made in recent years to improve their physiochemical properties by developing a better synthesis approach, surface functionalization, and biocompatibility for their safe use in the advancement of biomedical applications. The understanding of parameters involved during the development of nanostructures for their safe utilization in biomedical applications has been discussed. Computational studies are included in this article to understand better the properties of MoS2 and the mechanism involved in their interaction with biomolecules. As a result, we anticipate that this combined experimental and computational studies of MoS2 will inspire the development of nanostructures with smart drug delivery systems, and add value to the understanding of two-dimensional smart nano-carriers.

Potential-resolved electrochemiluminescence biosensor for simultaneous determination of multiplex miRNA

The multi-target simultaneous detection strategy based on potential-resolved electrochemiluminescence (ECL) has still been a research hotspot in analytical science, but the limited selection of ECL luminophores hinders the development of this field. Herein, polyethyleneimine functionalized perylene derivatives (PTC-PEI) and luminol functionalized gold nanoparticles (Lu-Au NPs) possessed significantly resolved emission potentials as ECL luminophore. The ternary ECL system was constructed with MoS2 nanoflowers and K2S2O8 as the coreaction accelerator and coreactant respectively, which significantly improved the cathode ECL emission of PTC-PEI. Simultaneously, the anode coreaction accelerator ZnO nanoflowers could promote the anode coreactant dissolved O2 reduction, and extremely enhanced the anode ECL emission of Lu-Au NPs. The proposed strategy addressed the major technical challenge of cross interference and competition of the coreactants for dual-biomarker detection, thus enabling accurate detection of miRNA-205 and miRNA-21 from 10 fM to 100 nM, with detection limits of 2.57 and 1.15 fM, respectively. In general, this work achieved a single-step synchronous detection of dual biomarkers, providing a new idea for the ECL detection of multiple biomarkers, and having potential value in the clinical diagnosis.

Recent Advances in Biomedical Nanotechnology Related to Natural Products

Natural product processing via nanotechnology has opened the door to innovative and significant applications in medical fields. On one hand, plants-derived bioactive ingredients such as phenols, pentacyclic triterpenes and flavonoids exhibit significant pharmacological activities, on another hand, most of them are hydrophobic in nature, posing challenges to their use. To overcome this issue, nanoencapsulation technology is employed to encapsulate these lipophilic compounds and enhance their bioavailability. In this regard, various nano-sized vehicles, including degradable functional polymer organic compounds, mesoporous silicon or carbon materials, offer superior stability and retention for bioactive ingredients against decomposition and loss during delivery as well as sustained release. On the other hand, some naturally occurring polymers, lipids and even microorganisms, which constitute a significant portion of Earth's biomass, show promising potential for biomedical applications as well. Through nano-processing, these natural products can be developed into nano-delivery systems with desirable characteristics for encapsulation a wide range of bioactive components and therapeutic agents, facilitating in vivo drug transport. Beyond the presentation of the most recent nanoencapsulation and nano-processing advancements with formulations mainly based on natural products, this review emphasizes the importance of their physicochemical properties at the nanoscale and their potential in disease therapy.

Portable and Rapid Dual-Biomarker Detection Using Solution-Gated Graphene Field Transistors in the Accurate Diagnosis of Prostate Cancer

Prostate-specific antigen (PSA) is the common serum-relevant biomarker for early prostate cancer (PCa) detection in clinical diagnosis. However, it is difficult to accurately diagnose PCa in the early stage due to the low specificity of PSA. Herein, a new solution-gated graphene field transistor (SGGT) biosensor with dual-gate for dual-biomarker detection is designed. The sensing mechanism is that the designed aptamers immobilized on the surface of the gate electrodes can capture PSA and sarcosine (SAR) biomolecules and induce the capacitance changes of the electric double layers of SGGT. The limit of detections of PSA and SAR biomarkers can reach 0.01 fg mL-1 , which is three-to-four orders of magnitude lower than previously reported assays. The detection time of PSA and SAR is ≈4.5 and ≈13 min, which is significantly faster than the detection time (1-2 h) of conventional methods. The clinical serum samples testing demonstrates that the biosensor can distinguish the PCa patients from the control group and the diagnosis accuracy can reach 100%. The SGGT biosensor can be integrated into the portable platform and the diagnostic results can directly display on the smartphone/Pad. Therefore, the integrated portable platform of the biosensor can distinguish cancer types through the dual-biomarker detection.

Digital droplet immunoassay based on a microfluidic chip with magnetic beads for the detection of prostate-specific antigen

Sensitive biomarker detection techniques are beneficial for both disease diagnosis and postoperative examinations. In this study, we report an integrated microfluidic chip designed for the immunodetection of prostate-specific antigens (PSAs). The microfluidic chip is based on the three-dimensional structure of quartz capillaries. The outlet channel extends to 1.8 cm, effectively facilitating the generation of uniform droplets ranging in size from 3 to 50 μm. Furthermore, we successfully immobilized the captured antibodies onto the surface of magnetic beads using an activator, and we constructed an immunosandwich complex by employing biotinylated antibodies. A key feature of this microfluidic chip is its integration of microfluidic droplet technology advantages, such as high-throughput parallelism, enzymatic signal amplification, and small droplet size. This integration results in an exceptionally sensitive PSA detection capability, with the detection limit reduced to 7.00 ± 0.62 pg/mL.

Point-of-Care Prostate Specific Antigen Testing: Examining Translational Progress toward Clinical Implementation

Prostate cancer (PCa) is the second most common male cancer and is attributable to over 375,000 deaths annually. Prostate specific antigen (PSA) is a key biomarker for PCa and therefore measuring patient PSA levels is an important aspect of the diagnostic pathway. Automated immunoassays are currently utilized for PSA analysis, but they require a laboratory setting with specialized equipment and trained personnel. This results in high diagnostic costs, extended therapeutic turnaround times, and restrictions on testing capabilities in resource-limited settings. Consequently, there is a strong drive to develop point-of-care (PoC) PSA tests that can offer accurate, low-cost, and rapid results at the time and place of the patient. However, many emerging PoC tests experience a trade-off between accuracy, affordability, and accessibility which distinctly limits their translational potential. This review comprehensively assesses the translational advantages and limitations of emerging laboratory-level and commercial PoC tests for PSA determination. Electrochemical and optical PSA sensors from 2013 to 2023 are systematically examined. Furthermore, we suggest how the translational potential of emerging tests can be optimized to achieve clinical implementation and thus improve PCa diagnosis globally.

A flash signal amplification approach for ultrasensitive and rapid detection of single nucleotide polymorphisms in tuberculosis

In recent years, the demand for rapid, sensitive, and simple methods for diagnosing deoxyribonucleic acid (DNA) has grown due to the increase in the variation of infectious diseases. This work aimed to develop a flash signal amplification method coupled with electrochemical detection for polymerase chain reaction (PCR)-free tuberculosis (TB) molecular diagnosis. We exploited the slightly miscible properties of butanol and water to instantly concentrate a capture probe DNA, a single-stranded mismatch DNA, and gold nanoparticles (AuNPs) to a small volume to reduce the diffusion and reaction time in the solution. In addition, the electrochemical signal was enhanced once two strands of DNA were hybridized and bound to the surface of the gold nanoparticle at an ultra-high density. To eliminate non-specific adsorption and identify mismatched DNA, the self-assembled monolayers (SAMs) and Muts proteins were sequentially modified on the working electrode. This sensitive and specific approach can detect as low as attomolar levels of DNA targets (18 aM) and is successfully applied to detecting tuberculosis-associated single nucleotide polymorphisms (SNPs) in synovial fluid. More importantly, as this biosensing strategy can amplify the signal in only a few seconds, it possesses a great potential for point-of-care and molecular diagnosis applications.

Biosensors for prostate cancer detection

Prostate cancer (PC) is one of the most common tumors and a leading cause of mortality among men, resulting in ~375 000 deaths annually worldwide. Various analytical methods have been designed for quantitative and rapid detection of PC biomarkers. Electrochemical (EC), optical, and magnetic biosensors have been developed to detect tumor biomarkers in clinical and point-of-care (POC) settings. Although POC biosensors have shown potential for detection of PC biomarkers, some limitations, such as the sample preparation, should be considered. To tackle such shortcomings, new technologies have been utilized for development of more practical biosensors. Here, biosensing platforms for the detection of PC biomarkers such as immunosensors, aptasensors, genosensors, paper-based devices, microfluidic systems, and multiplex high-throughput platforms, are discussed.

Fabrication of an electrochemical aptasensor for the determination of sarcosine based on synthesized CuCo2O4 nanosheets

Sarcosine (SRN) detection in body fluids is related to the diagnosis of prostate cancer. However, the development of SRN biosensors has been limited due to the low concentration of SRN in body fluids. Here, a new electrochemical strategy for selective and accurate determination of SRN in urine samples is reported. CuCo2O4 nanosheets (CuCo2O4 NSs) have been synthesized and used as a new platform in the design of efficient electrochemical aptasensors for prostate cancer diagnosis. As far as we know, CuCo2O4 NSs have not been used so far in electrochemical aptasensor design. The presence of CuCo2O4 NSs on the electrode surface as a platform improves the conductivity and surface area. Therefore, it can be very effective in improving the diagnostic performance of the electrochemical aptasensor. The linear concentration range and limit of detection (LOD) for this strategy were calculated to be 1 pM- 8 μM and 350 fM, respectively.

A closed-loop catalytic nanoreactor system on a transistor

Precision chemistry demands miniaturized catalytic systems for sophisticated reactions with well-defined pathways. An ideal solution is to construct a nanoreactor system functioning as a chemistry laboratory to execute a full chemical process with molecular precision. However, existing nanoscale catalytic systems fail to in situ control reaction kinetics in a closed-loop manner, lacking the precision toward ultimate reaction efficiency. We find an inter-electrochemical gating effect when operating DNA framework-constructed enzyme cascade nanoreactors on a transistor, enabling in situ closed-loop reaction monitoring and modulation electrically. Therefore, a comprehensive system is developed, encapsulating nanoreactors, analyzers, and modulators, where the gate potential modulates enzyme activity and switches cascade reaction "ON" or "OFF." Such electric field-effect property enhances catalytic efficiency of enzyme by 343.4-fold and enables sensitive sarcosine assay for prostate cancer diagnoses, with a limit of detection five orders of magnitude lower than methodologies in clinical laboratory. By coupling with solid-state electronics, this work provides a perspective to construct intelligent nano-systems for precision chemistry.

Biomolecule-functionalized nanoformulations for prostate cancer theranostics

BACKGROUND

Even with the advancement in the areas of cancer nanotechnology, prostate cancer still poses a major threat to men's health. Nanomaterials and nanomaterial-derived theranostic systems have been explored for diagnosis, imaging, and therapy for different types of cancer still, for prostate cancer they have not delivered at full potential because of the limitations like in vivo biocompatibility, immune responses, precise targetability, and therapeutic outcome associated with the nanostructured system.

AIM OF REVIEW

Functionalizing nanomaterials with different biomolecules and bioactive agents provides advantages like specificity towards cancerous tumors, improved circulation time, and modulation of the immune response leading to early diagnosis and targeted delivery of cargo at the site of action.

KEY SCIENTIFIC CONCEPTS OF REVIEW

In this review, we have emphasized the classification and comparison of various nanomaterials based on biofunctionalization strategy and source of biomolecules such that it can be used for possible translation in clinical settings and future developments. This review highlighted the opportunities for embedding highly specific biological targeting moieties (antibody, aptamer, oligonucleotides, biopolymer, peptides, etc.) on nanoparticles which can improve the detection of prostate cancer-associated biomarkers at a very low limit of detection, direct visualization of prostate tumors and lastly for its therapy. Lastly, special emphasis was given to biomimetic nanomaterials which include functionalization with extracellular vesicles, exosomes and viral particles and their application for prostate cancer early detection and drug delivery. The present review paves a new pathway for next-generation biofunctionalized nanomaterials for prostate cancer theranostic application and their possibility in clinical translation.

Molybdenum Disulfide as Tunable Electrochemical and Optical Biosensing Platforms for Cancer Biomarker Detection: A Review

Cancer is a common illness with a high mortality. Compared with traditional technologies, biomarker detection, with its low cost and simple operation, has a higher sensitivity and faster speed in the early screening and prognosis of cancer. Therefore, extensive research has focused on the development of biosensors and the construction of sensing interfaces. Molybdenum disulfide (MoS2) is a promising two-dimensional (2D) nanomaterial, whose unique adjustable bandgap shows excellent electronic and optical properties in the construction of biosensor interfaces. It not only has the advantages of a high catalytic activity and low manufacturing costs, but it can also further expand the application of hybrid structures through different functionalization, and it is widely used in various biosensors fields. Herein, we provide a detailed introduction to the structure and synthesis methods of MoS2, and explore the unique properties and advantages/disadvantages exhibited by different structures. Specifically, we focus on the excellent properties and application performance of MoS2 and its composite structures, and discuss the widespread application of MoS2 in cancer biomarkers detection from both electrochemical and optical dimensions. Additionally, with the cross development of emerging technologies, we have also expanded the application of other emerging sensors based on MoS2 for early cancer diagnosis. Finally, we summarized the challenges and prospects of MoS2 in the synthesis, functionalization of composite groups, and applications, and provided some insights into the potential applications of these emerging nanomaterials in a wider range of fields.

ZnO Hollow Quasi-Spheres Modified Screen-Printed Graphite Electrode for Determination of Carmoisine

Food colorants are important in food selection because they improve the gastronomic appeal of foods by improving their aesthetic appeal. However, after prolonged use, many colorants turn toxic and cause medical problems. A synthetic azo-class dye called carmoisine gives meals a red color. Therefore, the carmoisine determination in food samples is of great importance from the human health control. The current work was developed to synthesis ZnO hollow quasi-spheres (ZnO HQSs) to prepare a new electrochemical carmoisine sensor that is sensitive. Field emission-scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) have been used to analyze the properties of prepared ZnO HQSs. A screen-printed graphite electrode (SPGE) surface was modified with ZnO HQSs to prepare the ZnO HQSs-SPGE sensor. For carmoisine detection, the ZnO HQSs-SPGE demonstrated an appropriate response and notable electrocatalytic activities. The carmoisine electro-oxidation signal was significantly stronger on the ZnO HQSs-SPGE surface compared to the bare SPGE. Cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CHA), and differential pulse voltammetry (DPV) have been utilized to investigate the suggested protocol. The DPV results revealed an extensive linear association between variable carmoisine concentrations and peak current that ranged from 0.08 to 190.0 µM, with a limit of detection (LOD) as narrow as 0.02 µM. The ZnO HQSs-SPGE's ability to detect carmoisine in real samples proved the sensor's practical application.

Flower-like core-shell nanostructures based on natural asphalt coated with Ni-LDH nanosheets as an electrochemical platform for prostate cancer biomarker sensing

Flower-like core-shell nanostructures based on natural asphalt (NA) coated with nickel-layered double hydroxide nanosheets (Ni-LDH NSs) were synthesized for the first time. The synthetic nanostructures were successfully used as an efficient platform in the design of sarcosine (SAR) electrochemical aptasensor. SAR is considered an efficient biomarker for prostate cancer (PCa) diagnosis. However, the low concentration of SAR in urine, plasma, and tissue cells has limited the growth of SAR biosensors. The performance of the presented SAR aptasensor is very promising in being applied as a portable device in the identification of PCa. After drawing the calibration curve, the linear concentration range was obtained in two ranges from 5 pM to 100 nM and 100 nM to 7.9 μM, and the limit of detection (LOD) was calculated to be 1.6 pM. This study can provide a basis for wider research in various programs such as developing PCa diagnostic aptasensors and investigating the use of NA nanostructures in other electrochemical applications such as electrocatalysis and energy storage.

Electrochemical aptasensor based on the engineered core-shell MOF nanostructures for the detection of tumor antigens

It is essential to develop ultrasensitive biosensors for cancer detection and treatment monitoring. In the development of sensing platforms, metal-organic frameworks (MOFs) have received considerable attention as potential porous crystalline nanostructures. Core-shell MOF nanoparticles (NPs) have shown different diversities, complexities, and biological functionalities, as well as significant electrochemical (EC) properties and potential bio-affinity to aptamers. As a result, the developed core-shell MOF-based aptasensors serve as highly sensitive platforms for sensing cancer biomarkers with an extremely low limit of detection (LOD). This paper aimed to provide an overview of different strategies for improving selectivity, sensitivity, and signal strength of MOF nanostructures. Then, aptamers and aptamers-modified core-shell MOFs were reviewed to address their functionalization and application in biosensing platforms. Additionally, the application of core-shell MOF-assisted EC aptasensors for detection of several tumor antigens such as prostate-specific antigen (PSA), carbohydrate antigen 15-3 (CA15-3), carcinoembryonic antigen (CEA), human epidermal growth factor receptor-2 (HER2), cancer antigen 125 (CA-125), cytokeratin 19 fragment (CYFRA21-1), and other tumor markers were discussed. In conclusion, the present article reviews the advancement of potential biosensing platforms toward the detection of specific cancer biomarkers through the development of core-shell MOFs-based EC aptasensors.

DNA-Programmed Tuning of the Growth and Enzyme-Like Activity of a Bimetallic Nanozyme and Its Biosensing Applications

Nanozymes, which combine the merits of both nanomaterials and natural enzymes, have aroused tremendous attention as new representatives of artificial enzyme mimics. However, it still remains to be a great challenge to rationally engineer the morphologies and surface properties of nanostructures that lead to the desired enzyme-like activities. Here, we report a DNA-programming seed-growth strategy to mediate the growth of platinum nanoparticles (PtNPs) on gold bipyramids (AuBPs) for the synthesis of a bimetallic nanozyme. We find that the preparation of a bimetallic nanozyme is in a sequence-dependent manner, and the encoding of a polyT sequence allows the successful formation of bimetallic nanohybrids with greatly enhanced peroxidase-like activity. We further observe that the morphologies and optical properties of T15-mediated Au/Pt nanostructures (Au/T15/Pt) change over the reaction time, and the nanozymatic activity can be tuned by controlling the experimental conditions. As a concept application, Au/T15/Pt nanozymes are used to establish a simple, sensitive, and selective colorimetric assay for the determination of ascorbic acid (AA), alkaline phosphatase (ALP), and the inhibitor sodium vanadate (Na₃VO₄), demonstrating excellent analytical performance. This work provides a new avenue for the rational design of bimetallic nanozymes for biosensing applications.

Single-Atom Fe Nanozyme with Enhanced Oxidase-like Activity for the Colorimetric Detection of Ascorbic Acid and Glutathione

Single-atom nanozymes (SAzymes) have drawn ever-increasing attention due to their maximum atom utilization efficiency and enhanced enzyme-like activity. Herein, a facile pyrolysis strategy is reported for the synthesis of the iron-nitrogen-carbon (Fe-N-C) SAzyme using ferrocene trapped within porous zeolitic imidazolate framework-8 (ZIF-8@Fc) as a precursor. The as-prepared Fe-N-C SAzyme exhibited exceptional oxidase-mimicking activity, catalytically oxidizing 3,3',5,5'-tetramethylbenzidine (TMB) with high affinity (K_m) and fast reaction rate (V_max). Taking advantage of this property, we designed two colorimetric sensing assays based on different interaction modes between small molecules and Fe active sites. Firstly, utilizing the reduction activity of ascorbic acid (AA) toward oxidized TMB (TMBox), a colorimetric bioassay for AA detection was established, which exhibited a good linear range of detection from 0.1 to 2 μM and a detection limit as low as 0.1 μM. Additionally, based on the inhibition of nanozyme activity by the thiols of glutathione (GSH), a colorimetric biosensor for GSH detection was constructed, showing a linear response over a concentration range of 1-10 μM, with a detection limit of 1.3 μM. This work provides a promising strategy for rationally designing oxidase-like SAzymes and broadening their application in biosensing.

Recent advances in electrochemical nanomaterial-based aptasensors for the detection of cancer biomarkers

New technologies have provided suitable tools for rapid diagnosis of cancer which can reduce treatment costs and even increase patients' survival rates. Recently, the development of electrochemical aptamer-based nanobiosensors has raised great hopes for early, sensitive, selective, and low-cost cancer diagnosis. Here, we reviewed the flagged recent research (2021-2023) developed as a series of biosensors equipped with nanomaterials and aptamer sequences (nanoaptasensors) to diagnose/prognosis of various types of cancers. Equipping these aptasensors with nanomaterials and using advanced biomolecular technologies have provided specified biosensing interfaces for more optimal and reliable detection of cancer biomarkers. The primary intention of this review was to present and categorize the latest innovations used in the design of these diagnostic tools, including the hottest surface modifications and assembly of sensing bioplatforms considering diagnostic mechanisms. The main classification is based on applying various nanomaterials and sub-classifications considered based on the type of analyte and other vital features. This review may help design subsequent electrochemical aptasensors. Likewise, the up-to-date status, remaining limitations, and possible paths for translating aptasensors to clinical cancer assay tools can be clarified.

Recent Developments in the Design and Fabrication of Electrochemical Biosensors Using Functional Materials and Molecules

Electrochemical biosensors are superior technologies that are used to detect or sense biologically and environmentally significant analytes in a laboratory environment, or even in the form of portable handheld or wearable electronics. Recently, imprinted and implantable biosensors are emerging as point-of-care devices, which monitor the target analytes in a continuous environment and alert the intended users to anomalies. The stability and performance of the developed biosensor depend on the nature and properties of the electrode material or the platform on which the biosensor is constructed. Therefore, the biosensor platform plays an integral role in the effectiveness of the developed biosensor. Enormous effort has been dedicated to the rational design of the electrode material and to fabrication strategies for improving the performance of developed biosensors. Every year, in the search for multifarious electrode materials, thousands of new biosensor platforms are reported. Moreover, in order to construct an effectual biosensor, the researcher should familiarize themself with the sensible strategies behind electrode fabrication. Thus, we intend to shed light on various strategies and methodologies utilized in the design and fabrication of electrochemical biosensors that facilitate sensitive and selective detection of significant analytes. Furthermore, this review highlights the advantages of various electrode materials and the correlation between immobilized biomolecules and modified surfaces.

Nanozymes and nanoflower: Physiochemical properties, mechanism and biomedical applications

Natural enzymes possess several drawbacks which limits their application in industries, wastewater remediation and biomedical field. Therefore, in recent years researchers have developed enzyme mimicking nanomaterials and enzymatic hybrid nanoflower which are alternatives of enzyme. Nanozymes and organic inorganic hybrid nanoflower have been developed which mimics natural enzymes functionalities such as diverse enzyme mimicking activities, enhanced catalytic activities, low cost, ease of preparation, stability and biocompatibility. Nanozymes include metal and metal oxide nanoparticles mimicking oxidases, peroxidases, superoxide dismutase and catalases while enzymatic and non-enzymatic biomolecules were used for preparing hybrid nanoflower. In this review nanozymes and hybrid nanoflower have been compared in terms of physiochemical properties, common synthetic routes, mechanism of action, modification, green synthesis and application in the field of disease diagnosis, imaging, environmental remediation and disease treatment. We also address the current challenges facing nanozyme and hybrid nanoflower research and the possible way to fulfil their potential in future.

Nanomedicine for Combination Urologic Cancer Immunotherapy

Urologic cancers, particularly kidney, bladder, and prostate cancer, have a growing incidence and account for about a million annual deaths worldwide. Treatments, including surgery, chemotherapy, radiotherapy, hormone therapy, and immunotherapy are the main therapeutic options in urologic cancers. Immunotherapy is now a clinical reality with marked success in solid tumors. Immunological checkpoint blockade, non-specific activation of the immune system, adoptive cell therapy, and tumor vaccine are the main modalities of immunotherapy. Immunotherapy has long been used to treat urologic cancers; however, dose-limiting toxicities and low response rates remain major challenges in the clinic. Herein, nanomaterial-based platforms are utilized as the "savior". The combination of nanotechnology with immunotherapy can achieve precision medicine, enhance efficacy, and reduce toxicities. In this review, we highlight the principles of cancer immunotherapy in urology. Meanwhile, we summarize the nano-immune technology and platforms currently used for urologic cancer treatment. The ultimate goal is to help in the rational design of strategies for nanomedicine-based immunotherapy in urologic cancer.

Multifunctional nanoparticle for cancer therapy

Cancer is a complex disease associated with a combination of abnormal physiological process and exhibiting dysfunctions in multiple systems. To provide effective treatment and diagnosis for cancer, current treatment strategies simultaneously focus on various tumor targets. Based on the rapid development of nanotechnology, nanocarriers have been shown to exhibit excellent potential for cancer therapy. Compared with nanoparticles with single functions, multifunctional nanoparticles are believed to be more aggressive and potent in the context of tumor targeting. However, the development of multifunctional nanoparticles is not simply an upgraded version of the original function, but involves a sophisticated system with a proper backbone, optimized modification sites, simple preparation method, and efficient function integration. Despite this, many well-designed multifunctional nanoparticles with promising therapeutic potential have emerged recently. Here, to give a detailed understanding and analyzation of the currently developed multifunctional nanoparticles, their platform structures with organic or inorganic backbones were systemically generalized. We emphasized on the functionalization and modification strategies, which provide additional functions to the nanoparticle. We also discussed the application combination strategies that were involved in the development of nanoformulations with functional crosstalk. This review thus provides an overview of the construction strategies and application advances of multifunctional nanoparticles.

Laser-assisted protein micropatterning in a thermoplastic device for multiplexed prostate cancer biomarker detection

Immunoassays are frequently used for analysis of protein biomarkers. The specificity of antibodies enables parallel analysis of several target proteins, at the same time. However, the implementation of such multiplexed assays into cost-efficient and mass-producible thermoplastic microfluidic platforms remains difficult due to the lack of suitable immobilization strategies for different capture antibodies. Here, we introduce and characterize a method to functionalize the surfaces of microfluidic devices manufactured in the thermoplastic material cyclic olefin copolymer (COC) by a rapid prototyping process. A laser-induced immobilization process enables the surface patterning of anchor biomolecules at a spatial resolution of 5 μm. We employ the method for the analysis of prostate cancer associated biomarkers by competitive immunoassays in a microchannel with a total volume of 320 nL, and successfully detected the proteins PSA, CRP, CEA and IGF-1 at clinically relevant concentrations. Finally, we also demonstrate the simultaneous analysis of three markers spiked into undiluted human plasma. In conclusion, this method opens the way to transfer multiplexed immunoassays into mass-producible microfluidic platforms that are suitable for point of care applications.

Nanotechnology-Based Approaches for Voriconazole Delivery Applied to Invasive Fungal Infections

Invasive fungal infections increase mortality and morbidity rates worldwide. The treatment of these infections is still limited due to the low bioavailability and toxicity, requiring therapeutic monitoring, especially in the most severe cases. Voriconazole is an azole widely used to treat invasive aspergillosis, other hyaline molds, many dematiaceous molds, Candida spp., including those resistant to fluconazole, and for infections caused by endemic mycoses, in addition to those that occur in the central nervous system. However, despite its broad activity, using voriconazole has limitations related to its non-linear pharmacokinetics, leading to supratherapeutic doses and increased toxicity according to individual polymorphisms during its metabolism. In this sense, nanotechnology-based drug delivery systems have successfully improved the physicochemical and biological aspects of different classes of drugs, including antifungals. In this review, we highlighted recent work that has applied nanotechnology to deliver voriconazole. These systems allowed increased permeation and deposition of voriconazole in target tissues from a controlled and sustained release in different routes of administration such as ocular, pulmonary, oral, topical, and parenteral. Thus, nanotechnology application aiming to delivery voriconazole becomes a more effective and safer therapeutic alternative in the treatment of fungal infections.

Advanced nanomaterial for prostate cancer theranostics

Prostate cancer (PC) has the second highest incidence in men, according to global statistical data. The symptoms of PC in the early stage are not obvious, causing late diagnosis in most patients, which is the cause for missing the optimal treatment time. Thus, highly sensitive and precise early diagnosis methods are very important. Additionally, precise therapy regimens for good targeting and innocuous to the body are indispensable to treat cancer. This review first introduced two diagnosis methods, containing prostate-specific biomarkers detection and molecular imaging. Then, it recommended advanced therapy approaches, such as chemotherapy, gene therapy, and therapeutic nanomaterial. Afterward, we summarized the development of nanomaterial in PC, highlighting the importance of integration of diagnosis and therapy as the future direction against cancer.

Recent Advances in Electrochemical Aptasensors for Detection of Biomarkers

The early diagnosis of diseases is of great importance for the effective treatment of patients. Biomarkers are one of the most promising medical approaches in the diagnosis of diseases and their progress and facilitate reaching this goal. Among the many methods developed in the detection of biomarkers, aptamer-based biosensors (aptasensors) have shown great promise. Aptamers are promising diagnostic molecules with high sensitivity and selectivity, low-cost synthesis, easy modification, low toxicity, and high stability. Electrochemical aptasensors with high sensitivity and accuracy have attracted considerable attention in the field of biomarker detection. In this review, we will summarize recent advances in biomarker detection using electrochemical aptasensors. The principles of detection, sensitivity, selectivity, and other important factors in aptasensor performance are investigated. Finally, advantages and challenges of the developed aptasensors are discussed.

Recent Progress in Phase Regulation, Functionalization, and Biosensing Applications of Polyphase MoS2

The disulfide compounds of molybdenum (MoS₂ ) are layered van der Waals materials that exhibit a rich array of polymorphic structures. MoS₂ can be roughly divided into semiconductive phase and metallic phase according to the difference in electron filling state of the 4d orbital of Mo atom. The two phases show completely different properties, leading to their diverse applications in biosensors. But to some extent, they compensate for each other. This review first introduces the relationship between phase state and the chemical/physical structures and properties of MoS₂ . Furthermore, the synthetic methods are summarized and the preparation strategies for metastable phases are highlighted. In addition, examples of electronic and chemical property designs of MoS₂ by means of doping and surface modification are outlined. Finally, studies on biosensors based on MoS₂ in recent years are presented and classified, and the roles of MoS₂ with different phases are highlighted. This review offers references for the selection of materials to construct different types of biosensors based on MoS₂ , and provides inspiration for sensing performance enhancement.

The surface structure, stability, and catalytic performances toward O2 reduction of CoP and FeCoP2

The systematic atomistic level investigation of low-index surface structures, stabilities, and catalytic performances of CoP and FeCoP₂ towards the O₂ reduction reaction (ORR) is vital for their applications. Employing first-principles calculations, it is revealed that CoP and FeCoP₂ present the same surface stability in the order of (101) ≈ (011) > (111) > (001) > (110) > (010) > (100). They also possess a similar Wulff equilibrium crystal shape with (101) and (011) exposing the largest surface area. From the electronic view, FeCoP₂ presents improved electronic conductivity compared with CoP. From the energy view, whether FeCoP₂ delivers improved electrocatalytic activity toward the ORR with respect to CoP depends on the reactive surfaces and sites. Among the 4 surfaces considered, only CoP(101), FeCoP₂(101) and FeCoP₂(011) delivered ORR performances theoretically when the bridge metal-metal site acts as the reactive center, which makes CoP(011) the only exception. CoP(101)-b_Co-Co and FeCoP₂(011)-b_Fe-Co exhibit a larger thermodynamic limiting potential than FeCoP₂(101)-b_Co-Co, suggesting their higher performances toward the ORR. The last step of HO* desorption as the rate-limiting step accounts for 3/4. The third step of transformation from O* to HO* as the most sluggish step accounts for 1/4. The work function, d-band center, Bader charge, and electronic localization function calculations are performed to reveal the HO adsorption nature. The present work provides fundamental insight into the effect of Fe doping into CoP, the determination of the catalyst surface and the key species adsorption nature to guide the rational design of high-performance materials.

Nanomedicine for urologic cancers: diagnosis and management

Urologic cancers accounted for more than 2 million new cases and around 0.8 million deaths in 2020. Although surgery, chemotherapy, and radiotherapy, as well as castration for prostate cancer, remain the cornerstones for managing urologic neoplasms, they can result in severe adverse effects, poor patient compliance, and unsatisfactory survival rates, thus, it is essential to develop novel options that enable the early detection of these malignancies, together with providing accurate diagnoses, and more efficient treatment strategies. Nanomedicine represents an emerging approach that can deliver formulations or drugs across traditional biological barriers in the body and be directed to specific cell types within target organs via active targeting or passive targeting, thus, showing potential to improve the management of urologic cancers. In this review, we discussed the most recent updates on the application of nanomedicines in the diagnosis and treatment of urologic cancers, with focus on prostate, bladder and kidney tumors. We also presented the anti-tumor molecular mechanisms of newly designed nanomedicine for treating urologic cancers, mainly including image-guided surgery, chemotherapy, radiotherapy, gene therapy, immunotherapy, and their synergetic therapy. Current studies have demonstrated the potential advantages of nanomedicine over conventional approaches. However, most developments and new findings in this area have not been validated in clinical trials yet, and therefore, efforts shall be made to translate these research insights into clinical practices for urologic cancers.

Modulating the Biomimetic and Fluorescence Quenching Activities of Metal-Organic Framework/Platinum Nanoparticle Composites and Their Applications in Molecular Biosensing

Nanoscale metal-organic frameworks (nMOFs) have gained considerable attention with significant potential applications. Although great efforts have been devoted to designing and fabricating nanoscaffold structures, approaches of deliberately regulating the intrinsic functionality of nMOFs have been poorly explored. Herein, we report a simple and novel strategy to regulate the catalytic and fluorescence quenching behaviors of nMOFs through coordination-driven self-assembly. As a proof-of-concept, we synthesized a synergistic and stable MOF-metal nanocomposite by loading platinum nanoparticles (PtNPs) on a commonly used Fe-MOF, i.e., MIL-88B-NH₂/Pt, as a MOF composite model for exploration. On one hand, the complexation with ATP effectively broke the pH limitation of the peroxidase-mimicking MIL-88B-NH₂/Pt nanozyme, bringing a 10-fold increased catalytic activity under alkaline condition. Based on the distinct catalytic enhancement between ATP and other nucleotides, real-time monitoring of apyrase activity as well as colorimetric detection of alkaline phosphatase (ALP) was performed. On the other hand, interactions of MIL-88B-NH₂/Pt with fluorescent DNA were tolerant of different nucleic acids and, more importantly, were further manipulated by inorganic molecules. As a result, H₂O₂ could only trigger the release of a G-rich sequence, while phosphates could readily induce desorption of various DNA molecules with varying lengths, sequences, and fluorescent dyes. Accordingly, fluorescent DNA and MIL-88B-NH₂/Pt as functional probe-quencher pairs were proposed, allowing the establishment of a fluorescence bioassay for ALP and PPase detection and Boolean logic calculations. This work offers a means to tune the intrinsic activities of nMOFs by surface engineering, benefiting design of functional nanomaterials and development of advanced biosensing systems.

Cancer Diagnostics and Early Detection Using Electrochemical Aptasensors

The detection of early-stage cancer offers patients the best chance of treatment and could help reduce cancer mortality rates. However, cancer cells or biomarkers are present in extremely small amounts in the early stages of cancer, requiring high-precision quantitative approaches with high sensitivity for accurate detection. With the advantages of simplicity, rapid response, reusability, and a low cost, aptamer-based electrochemical biosensors have received considerable attention as a promising approach for the clinical diagnosis of early-stage cancer. Various methods for developing highly sensitive aptasensors for the early detection of cancers in clinical samples are in progress. In this article, we discuss recent advances in the development of electrochemical aptasensors for the early detection of different cancer biomarkers and cells based on different detection strategies. Clinical applications of the aptasensors and future perspectives are also discussed.

Metal-Nanoparticle-Supported Nanozyme-Based Colorimetric Sensor Array for Precise Identification of Proteins and Oral Bacteria

Convenient, precise, and high-throughput discrimination of multiple bioanalytes is of great significance for an early diagnosis of diseases. Array-based pattern recognition has proven to be a powerful tool to detect diverse analytes, but developing sensing elements featuring favorable surface diversity still remains a challenge. In this work, we presented a simple and facile method to prepare programmable metal-nanoparticle (NP)-supported nanozymes (MNNs) as artificial receptors for the accurate identification of multiple proteins and oral bacteria. The in situ reduction of metal NPs on hierarchical MoS₂ on polypyrrole (PPy), which generated differential nonspecific interactions with bioanalytes, was envisaged as the encoder to break through the limited supply of the receptor's quantity. As a proof of concept, three metal NPs, i.e., Au, Ag, and Pd NPs, were taken as examples to deposit on PPy@MoS₂ as colorimetric probes to construct a cross-reactive sensor array. Based on the principal component analysis (PCA), the proposed MNN sensor array could well discriminate 11 proteins with unique fingerprint-like patterns at a concentration of 250 nM and was sufficiently sensitive to determine individual proteins with a detection limit down to the nanomolar level. Remarkably, two highly similar hemoglobins from different species (hemoglobin and bovine hemoglobin) have been precisely identified. Additionally, five oral bacteria were also well separated from each other without cross-classification at the level of 10⁷ CFU mL^-1. Furthermore, the sensor array allowed effective discrimination of complex protein mixtures either at different molar ratios or with minor varying components. Most importantly, the blind samples, proteins in human serums, proteins in simulated body fluid environment, the heat-denatured proteins, and even clinical cancer samples all could be well distinguished by the sensor array, demonstrating the real-world applications in clinical diagnosis.