PCDetection: PolyA-CRISPR/Cas12a-based miRNA detection without PAM restriction

PdPt@SnS2 Nanosheets for a Novel Ultrasensitive Electrochemiluminescence Biosensor for miRNA-21 Assay

PdPt nanosheets decorated on SnS2 nanosheets (i.e., PdPt@SnS2 NSs) were fabricated for a novel electrochemiluminescence (ECL) biosensor for ultrasensitive detection of miRNA-21 based on catalytic hairpin assembly (CHA) cycles. The PdPt@SnS2 NSs serve as both the main luminophore and a highly effective coreaction accelerator in the ECL biosensor. In the CHA cycles, more miRNA-21 is captured, and the performance of the ECL biosensor is improved. When miRNA-21 is present, the hairpin chain DNA1 (i.e., H1) is opened, and the ferrocene (Fc)-modified hairpin chain DNA2 (i.e., Fc-H2) hybridizes with as-opened H1 by replacing miRNA-21 to stimulate CHA cycles of miRNA-21. During the CHA cycles, Fc-H2 quenches the ECL signal to monitor miRNA-21. As a result, the ECL biosensor shows ultrasensitive and highly selective detection of miRNA-21 from 1 aM to 1 nM with a detection limit (LOD) of 0.02 aM. In addition, the ECL biosensor exhibits excellent practicality for miRNA-21 detection in human serum samples.

Non-canonical CRISPR/Cas12a-based technology: A novel horizon for biosensing in nucleic acid detection

Nucleic acids are essential biomarkers in molecular diagnostics. The CRISPR/Cas system has been widely used for nucleic acid detection. Moreover, canonical CRISPR/Cas12a based biosensors can specifically recognize and cleave target DNA, as well as single-strand DNA serving as reporter probe, which have become a super star in recent years in the field of nucleic acid detection due to its high specificity, universal programmability and simple operation. However, canonical CRISPR/Cas12a based biosensors are hard to meet the requirements of higher sensitivity, higher specificity, higher efficiency, larger target scope, easier operation, multiplexing, low cost and diversified signal reading. Then, advanced non-canonical CRISPR/Cas12a based biosensors emerge. In this review, applications of non-canonical CRISPR/Cas12a-based biosensors in nucleic acid detection are summarized. And the principles, peculiarities, performances and perspectives of these non-canonical CRISPR/Cas12a based biosensors are also discussed.

An optimized microRNA detection platform based on PAM formation-regulated CRISPR/Cas12a activation

MicroRNAs (miRNAs) have emerged as biomarkers for the diagnosis and prognosis of various diseases, such as cancer. Recent advancements in CRISPR/Cas12a-based biosensors in combination with hybridization chain reaction (HCR) make it a promising approach for miRNA detection. To increase the compatibility of HCR and CRISPR/Cas12a, we compared two design strategies of hairpin DNA in HCR. The results showed that different arrangements of the protospacer sequence and protospacer adjacent motif (PAM) in the hairpin DNA could affect the sensing performance. The "PAM Formation" strategy, by which the duplex PAM sites are absent in the hairpin DNA and present in the long duplex DNA after HCR, exhibited advantages in detection sensitivity. By optimizing the probe sequences and reaction conditions, we developed a miRNA detection platform. With the same crRNA, this platform enables the identification of different miRNAs by simply replacing the loop region of the target recognition probe. In addition, the proposed platform can detect single-stranded DNA and distinguishing single or multiple base mutations in the target strand. The application of discriminating the target miRNA expression levels from different cell lines validated the reliability and practicability of the sensor platform, indicating its potential applications in early clinical accurate diagnosis of cancers.

Digital Recombinase Polymerase Amplification, Digital Loop-Mediated Isothermal Amplification, and Digital CRISPR-Cas Assisted Assay: Current Status, Challenges, and Perspectives

Digital nucleic acid detection based on microfluidics technology can quantify the initial amount of nucleic acid in the sample with low equipment requirements and simple operations, which can be widely used in clinical and in vitro diagnosis. Recently, isothermal amplification technologies such as recombinase polymerase amplification (RPA), loop-mediated isothermal amplification (LAMP), and clustered regularly interspaced short palindromic repeats-CRISPR associated proteins (CRISPR-Cas) assisted technologies have become a hot spot of attention and state-of-the-art digital nucleic acid chips have provided a powerful tool for these technologies. Herein, isothermal amplification technologies including RPA, LAMP, and CRISPR-Cas assisted methods, based on digital nucleic acid microfluidics chips recently, have been reviewed. Moreover, the challenges of digital isothermal amplification and possible strategies to address them are discussed. Finally, future directions of digital isothermal amplification technology, such as microfluidic chip and device manufacturing, multiplex detection, and one-pot detection, are outlined.

Asymmetric CRISPR enabling cascade signal amplification for nucleic acid detection by competitive crRNA

Nucleic acid detection powered by CRISPR technology provides a rapid, sensitive, and deployable approach to molecular diagnostics. While exciting, there remain challenges limiting its practical applications, such as the need for pre-amplification and the lack of quantitative ability. Here, we develop an asymmetric CRISPR assay for cascade signal amplification detection of nucleic acids by leveraging the asymmetric trans-cleavage behavior of competitive crRNA. We discover that the competitive reaction between a full-sized crRNA and split crRNA for CRISPR-Cas12a can induce cascade signal amplification, significantly improving the target detection signal. In addition, we find that CRISPR-Cas12a can recognize fragmented RNA/DNA targets, enabling direct RNA detection by Cas12a. Based on these findings, we apply our asymmetric CRISPR assay to quantitatively detect microRNA without the need for pre-amplification, achieving a detection sensitivity of 856 aM. Moreover, using this method, we analyze and quantify miR-19a biomarker in plasma samples from bladder cancer patients. This asymmetric CRISPR assay has the potential to be widely applied for simple and sensitive nucleic acid detection in various diagnostic settings.

Highly sensitive and facile microRNA detection based on target triggered exponential rolling-circle amplification coupling with CRISPR/Cas12a

MicroRNAs (miRNAs) play a crucial role in the regulation of gene expression and have been implicated in many diseases. Herein, we develop a target triggered exponential rolling-circle amplification coupling with CRISPR/Cas12a (T-ERCA/Cas12a) system, which can achieve the ultrasensitive detection with simple operation and no annealing procedure. In this assay, T-ERCA combines the exponential amplification with rolling-circle amplification by introducing a dumb-bell probe with two enzyme recognition sites. miRNA-155 targets are activators that trigger exponential rolling circle amplification to produce large amounts of ssDNA, which is then recognized by CRISPR/Cas12a for further amplification. Compared with single EXPAR or RCA combined with CRISPR/Cas12a, this assay shows higher amplification efficiency. Therefore, benefiting from the excellent amplification effect of T-ERCA and the high recognition specificity of CRISPR/Cas12a, the proposed strategy shows a wide detection range from 1 fM to 5 nM with a LOD (limit of detection) down to 0.31 fM. Moreover, it shows good application ability for assessing miRNA levels in different cells, indicating that the T-ERCA/Cas12a may provide a new guidance for molecular diagnosis and clinical practical application.

Loop-mediated isothermal amplification (LAMP)/Cas12a assay for detection of Ralstonia solanacearum in tomato

Introduction: Bacterial wilt (BW) caused by the aerobic, Gram-negative pathogenic species Ralstonia solanacearum (RS) is a major disease impacting commercial agriculture worldwide. Asian phylotype I of RS is the cause of tomato bacterial wilt, which has caused severe economic losses in southern China for many years. An urgent priority in control of bacterial wilt is development of rapid, sensitive, effective methods for detection of RS. Methods: We describe here a novel RS detection assay based on combination of loop-mediated isothermal amplification (LAMP) and CRISPR/Cas12a. crRNA1, with high trans-cleavage activity targeting hrpB gene, was selected out of four candidate crRNAs. Two visual detection techniques, involving naked-eye observation of fluorescence and lateral flow strips, were tested and displayed high sensitivity and strong specificity. Results and Discussion: The LAMP/Cas12a assay accurately detected RS phylotype Ⅰ in 14 test strains, and showed low detection limit (2.0 × 10⁰ copies). RS in tomato stem tissue and soil samples from two field sites with suspected BW infection was identified accurately, suggesting potential application of LAMP/Cas12a assay as point-of-care test (POCT). The overall detection process took less than 2 h and did not require professional lab equipment. Our findings, taken together, indicate that LAMP/Cas12a assay can be developed as an effective, inexpensive technique for field detection and monitoring of RS.

A universal and specific RNA biosensor via DNA circuit-mediated PAM-independent CRISPR/Cas12a and PolyA-rolling circle amplification

Point of care testing (POCT) has important clinical significance for the diagnosis and prognosis evaluation of diseases. At present, the biosensor based on CRISPR/Cas12a has become a powerful diagnostic tool due to its high sensitivity. However, CRISPR/Cas12a requires PAM sequence to recognize target double strand and only can recognize specific sequence, so it is not universal. The current RNA detection techniques either lack consideration for specificity and universality, are expensive and difficult, or both. Therefore, it is crucial to create a CRISPR/Cas12a-based RNA detection system that is easy to use, cheap, specific, and universal in order to further its use in molecular diagnostics. Here, we established a DNA circuit-mediated PAM-independent CRISPR/Cas12a coupled PolyA-rolling circle amplification for RNA detection biosensor, namely DCPRBiosensor. The DCPRBiosensor not only functions as a simple, inexpensive, and highly sensitive RNA detection sensor, but it also boasts innovative specificity and universality features. More importantly, DCPRBiosensor removes the PAM restriction of CRISPR/Cas12a. The DCPRBiosensor's detection limit reached 100 aM and it had a linear relationship between 100 aM and 10 pM. We detected four piRNAs to verify the universality and stability of DCPRBiosensor. Then, we verified that DCPRBiosensor has good discrimination ability for single-base mismatch. Finally, we successfully detected piRNA in DLD-1 and HCT-116 cells and urine mixed samples within 4.5 h. In conclusion, we believe that DCPRBiosensor will have a substantial impact on both the development of CRISPR/as12a's applications and the investigation of the clinical value of piRNA.

Ultrasensitive CRISPR/Cas13a-Mediated Photoelectrochemical Biosensors for Specific and Direct Assay of miRNA-21

Sensitive and specific assay of microRNAs (miRNAs) is beneficial to early disease screening. Herein, we for the first time proposed clustered regularly interspaced short palindromic repeats (CRISPR)/Cas13a-mediated photoelectrochemical biosensors for the direct assay of miRNA-21. In this study, compared with traditional nucleic acid-based signal amplification strategies, the CRISPR/Cas13a system can greatly improve the specificity and sensitivity of target determination due to its accurate recognition and high-efficient trans-cleavage capability without complex nucleic acid sequence design. Moreover, compared with the CRISPR/Cas12a-based biosensing platform, the developed CRISPR/Cas13a-mediated biosensor can directly detect RNA targets without signal transduction from RNA to DNA, thereby avoiding signal leakage and distortion. Generally, the proposed biosensor reveals excellent analysis capability with a wider linear range from 1 fM to 5 nM and a lower detection limit of 1 fM. Additionally, it also shows satisfactory stability in the detection of human serum samples and cell lysates, manifesting that it has great application prospects in the areas of early disease diagnosis and biomedical research.