Rubber gloves biodegradation by a consortium, mixed culture and pure culture isolated from soil samples

Commentary by the Commission for Hospital Hygiene and Infection Prevention (KRINKO) on the indication-based use of disposable medical gloves in the healthcare sector

Introduction

When using disposable medical gloves, the indications for their use are not always clear in practice, so that they are often worn even in cases where this is neither necessary for the protection of the patient nor for self-protection. This can not only lead to neglect of adequate hand hygiene, but is also ecologically critical in terms of glove consumption and the resources used.

Method

German and international recommendations, including WHO guidelines and information, statements and separate publications on indications and non-indications of disposable medical gloves were evaluated as the basis for deriving the indications for wearing disposable medical gloves.

Results

Typical indications for disposable medical gloves for direct and indirect patient contact, laboratory work and other medical activities are summarized in a table. Situations in which the use of disposable medical gloves is not indicated are also shown separately in tabular form.

Discussion

Further situations are discussed in which the wearing of disposable medical gloves is currently recommended from an infection prevention or occupational health and safety perspective, but should be re-evaluated in the future. In addition to other aspects for reducing glove consumption, such as glove disinfection, guidelines for implementing the use of gloves according to indication are also presented, emphasizing the special role-model function of hygiene staff.

Conclusion

By avoiding the use of disposable medical gloves where there is no indication and by selecting suitable glove material where there is an indication, not only can sustainability be increased, but costs can also be saved without jeopardizing patient and occupational safety.

A review of tire wear particles: Occurrence, adverse effects, and control strategies

Tire wear particles (TWPs), common mixed particulate emerging contaminants in the environment, have global per capita emissions accounting for 0.23-1.9 kg/year, attracting global attention recently due to their wide detection, small size, mobility, and high toxicity. This review focuses on the occurrence characteristics of TWPs in multiple environmental media, adverse effects on organisms, potential toxicity mechanisms, and environmental risk prevention and control strategies of TWPs. The environmental fate of TWPs throughout the entire process is systematically investigated by the bibliometric analysis function of CiteSpace. This review supplements the gap in the joint toxicity and related toxicity mechanisms of TWPs with other environmental pollutants. Based on the risks review of TWPs and their additives, adverse impacts have been found in organisms from aquatic environments, soil, and humans, such as the growth inhibition effect on Chironomus dilutes. A multi-faceted and rationalized prevention and control treatment of "source-process-end" for the whole process can be achieved by regulating the use of studded tires, improving the tire additive formula, growing plants roadside, encouraging micro-degradation, and other methods, which are first reviewed. By addressing the current knowledge gaps and exploring prospects, this study contributes to developing strategies for reducing risks and assessing the fate of TWPs in multiple environmental media.

Biodegradation: the best solution to the world problem of discarded polymers

The widespread use of polymers has made our lives increasingly convenient by offering a more convenient and dependable material. However, the challenge of efficiently decomposing these materials has resulted in a surge of polymer waste, posing environment and health risk. Currently, landfill and incineration treatment approaches have notable shortcomings, prompting a shift towards more eco-friendly and sustainable biodegradation approaches. Biodegradation primarily relies on microorganisms, with research focusing on both solitary bacterial strain and multi-strain communities for polymer biodegradation. Furthermore, directed evolution and rational design of enzyme have significantly contributed to the polymer biodegradation process. However, previous reviews often undervaluing the role of multi-strain communities. In this review, we assess the current state of these three significant fields of research, provide practical solutions to issues with polymer biodegradation, and outline potential future directions for the subject. Ultimately, biodegradation, whether facilitated by single bacteria, multi-strain communities, or engineered enzymes, now represents the most effective method for managing waste polymers.

Biodegradation of Nitrile Gloves as Sole Carbon Source of Pseudomonas aeruginosa in Liquid Culture

Nitrile gloves have become a significant environmental pollutant after the COVID-19 pandemic due to their single-use design. This study examines the capability of P. aeruginosa to use nitrile gloves as its sole carbon energy source. Biodegradation was determined by P. aeruginosa adapting to increasing nitrile glove concentrations at 1%, 3%, and 5% (w/v). The growth kinetics of P. aeruginosa were evaluated, as well as the polymer weight loss. Topographic changes on the glove surfaces were examined using SEM, and FT-IR was used to evaluate the biodegradation products of the nitrile gloves. Following the establishment of a biofilm on the glove surface, the nitrile toxicity was minimized via biodegradation. The result of the average weight loss of nitrile gloves was 2.25%. FT-IR analysis revealed the presence of aldehydes and aliphatic amines associated with biodegradation. SEM showed P. aeruginosa immersed in the EPS matrix, causing the formation of cracks, scales, protrusions, and the presence of semi-spherical particles. We conclude that P. aeruginosa has the capability to use nitrile gloves as its sole carbon source, even up to 5%, through biofilm formation, demonstrating the potential of P. aeruginosa for the degradation of nitrile gloves.

Cleavage of natural rubber by rubber oxygenases in Gram-negative bacteria

Bacterial degradation of natural rubber (NR) in an oxic environment is initiated by oxidative cleavage of double bonds in the NR-carbon backbone and is catalyzed by extracellular haem-containing rubber oxygenases. NR-cleavage products of sufficiently low molecular mass are taken up by the cells and metabolized for energy and biomass formation. Gram-negative and Gram-positive NR-degrading bacteria (usually) employ different types of rubber oxygenases such as RoxA and/or RoxB (most Gram-negative NR-degraders) or latex clearing protein Lcp (most Gram-positive NR-degraders). In order to find novel orthologues of Rox proteins, we have revisited databases and provide an update of Rox-like proteins. We describe the putative evolution of rubber oxygenases and confirm the presence of a third subgroup of Rox-related proteins (RoxCs), the biological function of which remains, however, unclear. We summarize the knowledge on the taxonomic position of Steroidobacter cummioxidans 35Y and related species. Comparison of genomic and biochemical features of strain 35Y with other species of the genus Steroidobacter suggests that strain 35Y represents a species of a novel genus for which the designation Aurantibaculum gen. nov. is proposed. A short summary on the capabilities of NR-degrading consortia, that could be superior in biotechnological applications compared to pure cultures, is also provided. KEY POINTS: • Three types of rubber oxygenases exist predominantly in Gram-negative microbes • S. cummioxidans 35Y contains RoxA and RoxB which are superior in activity • S. cummioxidans 35Y represents a species of a novel genus.

Investigation of potential rubber-degrading bacteria and genes involved

COVID-19 pandemic has generated high demand for natural rubber gloves (NR) leading to crucial issues of rubber waste and waste management such as burning, dumping, stockpiling, discarding waste in landfills. Hence, rubber biodegradation by microorganisms is an alternative solution to the problem. The biodegradation method is environmentally friendly but normally extremely slow. Numerous microorganisms can degrade NR as a source of carbon and energy. In this study, Rhodococcus pyridinivorans KU1 was isolated from the consortium CK from previous study. The 40% rubber weight loss was detected after incubated for 2 months. The bacterial colonization and cavities on the surface of rubber were identified using a scanning electron microscope (SEM). The result demonstrated the critical degradation of the rubber surface, indicating that bacteria can degrade rubber and use it as their sole carbon source. The result of whole-genome sequencing (WGS) revealed a gene that is 99.9% identical to lcp which is responsible for poly (cis-1,4-isoprene) degradation. The results from Meta16S rRNA sequencing showed that the microbial communities were slightly shifted during the 2-month degradation, depending on the presence of monomers or oligomers appeared during the degradation process. The majority of species were soil bacteria such as phylum Proteobacteria, Actinobacteria, and Firmicutes. Members of Pseudoxanthomonas seemed to be the dominant degraders throughout the degradation.

Assembly strategies for rubber-degrading microbial consortia based on omics tools

Numerous microorganisms, including bacteria and fungus, have been identified as capable of degrading rubber. Rubber biodegradation is still understudied due to its high stability and the lack of well-defined pathways and efficient enzymes involved in microorganism metabolism. However, rubber products manufacture and usage cause substantial environmental issues, and present physical-chemical methods involve dangerous chemical solvents, massive energy, and trash with health hazards. Eco-friendly solutions are required in this context, and biotechnological rubber treatment offers considerable promise. The structural and functional enzymes involved in poly (cis-1,4-isoprene) rubber and their cleavage mechanisms have been extensively studied. Similarly, novel bacterial strains capable of degrading polymers have been investigated. In contrast, relatively few studies have been conducted to establish natural rubber (NR) degrading bacterial consortia based on metagenomics, considering process optimization, cost effective approaches and larger scale experiments seeking practical and realistic applications. In light of the obstacles encountered during the constructing NR-degrading consortia, this study proposes the utilization of multi-omics tools to discern the underlying mechanisms and metabolites of rubber degradation, as well as associated enzymes and effective synthesized microbial consortia. In addition, the utilization of omics tool-based methods is suggested as a primary research direction for the development of synthesized microbial consortia in the future.

Biodegradation of rubber in cultures of Rhodococcus rhodochrous and by its enzyme latex clearing protein

The biodegradation of rubber materials is considered as a sustainable recycling alternative, highlighting the use of microorganisms and enzymes in oxidative processes of natural rubber. Currently, the main challenge is the treatment of rubber materials such as waste tyres, where the mixture of rubber polymers with different additives and the cross-linked structure obtained due to the vulcanisation process positions them as highly persistent materials. This study characterises the degradation of different rubber-containing substrates in in vivo and in vitro processes using the bacterium Rhodococcus rhodochrous and the oxygenase latex clearing protein (Lcp) from the same strain. For the first time, the degradation of polyisoprene particles in liquid cultures of R. rhodochrous was analysed, obtaining up to 19.32% mass loss of the polymer when using it as the only carbon source. Scanning electron microscopy analysis demonstrated surface alteration of pure polyisoprene and vulcanised rubber particles after 2 weeks of incubation. The enzyme Lcp_RR was produced in bioreactors under rhamnose induction and its activity characterised in oxygen consumption assays at different enzyme concentrations. A maximum consumption of 28.38 µmol_O2/min was obtained by adding 100 µg/mL Lcp_RR to a 2% (v/v) latex emulsion as substrate. The bioconversion of natural rubber into reaction degradation products or oligoisoprenoids was calculated to be 32.54%. Furthermore, the mass distribution of the oligoisoprenoids was analysed by liquid chromatography coupled to mass spectrometry (LC-MS) and 17 degradation products, ranging from C20 to C100 oligoisoprenoids, were identified. The multi-enzymatic degradation capacity of R. rhodochrous positions it as a model microorganism in complex degradation processes such as in the case of tyre waste.

Tire Ground Rubber Biodegradation by a Consortium Isolated from an Aged Tire

Rubber is a natural product, the main car tire component. Due to the characteristics acquired by this material after its vulcanization process, its degradation under natural conditions requires very long times, causing several environmental problems. In the present work, the existence of a bacterial consortium isolated from a discarded tire found within the Socabaya River with the ability to degrade shredded tire rubber without any chemical pretreatment is explored. Taking into consideration the complex chemical composition of a rubber tire and the described benefits of the use of pretreatments, the study is developed as a preliminary analysis. The augmentative growth technique was used, and the level of degradation was quantified as a percentage through the analysis of microbial respiration. Schiff’s test and the use of comparative photographs of scanning electron microscopy (SEM) were also used. The consortium using next generation genetic sequencing was analyzed. A 4.94% degradation point was obtained after 20 days of experimentation, and it was found that the consortium was mostly made up with Delftia tsuruhatensis with 69.12% of the total genetic readings of the consortium and the existence of 15% of unidentified microbial strains at the genre level. The role played by the organisms in the degradation process is unknown. However, the positive results in the tests carried out show that the consortium had action on the shredded tire, showing a mineralization process.

Ecotoxicity testing of paraquat metabolites degraded by filamentous fungi in model organism

Paraquat has been intensively used worldwide for several decades for the purpose of weed control in profit crop plantation. This leads to the accumulation of the herbicide and its metabolites in the environment. One promising method to reduce and/or eliminate the paraquat-contaminants is via microbial bioremediation. Filamentous fungi, Aspergillus tamarii PRPY-2, isolated from rubber tree plantation in the northern part of Thailand exhibited the ability to degrade paraquat in liquid media at laboratory scale. Thus, utilization of this species in paraquat-contaminated sites is potentially feasible. However, metabolites generated during biodegradation processes are possibly more toxic than the parent compound. Hence, before introducing this microbe into the environment, it is necessary to ensure that metabolites have no adverse effects on the ecosystem. The present work focuses on the study of the toxic effects of paraquat metabolites on the eukaryote model organism using Saccharomyces cerevisiae of wild type and five mutant strains. The relation between paraquat degradation and growth of fungi was firstly performed. Ecotoxicity testing was done via chemo-genetic screening method. Oxidative stress-related enzyme, superoxide dismutase of S. cerevisiae was also verified. The results illustrated that fungi could degrade 100% of paraquat in Czapeck Dox liquid medium within 21 days. Ecotoxicity data indicated that all yeast strains grew better in a medium containing paraquat metabolites than the one containing parent compound. Among them, mutant lacking superoxide dismutase (SOD1) gene was the most affected strain. Moreover, enzyme activity of yeast cells exposed to paraquat metabolites was found to be lower than that exposed to parent compound. In summary, metabolites degraded by A. tamarii are less toxic to model organism than paraquat. Therefore, the utilization of this species for remediation purpose was found to be safe for the environment.

Poly-cis-isoprene Degradation by Nocardia sp. BSTN01 Isolated from Industrial Waste

The natural and synthetic rubber (NR and SR) products are made up of poly-cis-isoprene which are estimated as one of the major solid-wastes and need to be cleared through bacterial bioremediation. The present research reports isolation and characterization of a gram-positive, non-spore forming, filamentous actinomycete Nocardia sp. BSTN01 from the waste of a rubber processing industry. We found NR- and SR-dependent growth of BSTN01 over a period of time. BSTN01 has been found to degrade NR by 55.3% and SR by 45.9% in 6 weeks. We have found an increase in the total protein of BSTN01 cells up to 623.6 and 573.9 µg/ml for NR and SR, respectively, after 6 weeks of growth in rubber-supplemented MSM medium. Scanning electron microscopy revealed adhesive growth of BSTN01 on the surface of NR and SR. Formation of aldehyde groups due to the degradation was indicated by Schiff's test and confirmed by FTIR-ATR analysis. The genome sequence of BSTN01 revealed the gene responsible for rubber degradation. The presence of lcp gene and structural analysis of the latex clearing protein further confirmed the reliability. Studies on quantification of rubber degradation capability by the isolated strain prove it to be an efficient degrader of NR and SR. This study revealed the genome sequence and structural analysis of the proteins responsible for degradation of rubber. A new fast-growing Nocardia strain can degrade both NR and SR with higher efficiency and have future potential for rubber solid-waste management either alone or in consortia.

Gordonia sp. BSTG01 isolated from Hevea brasiliensis plantation efficiently degrades polyisoprene (rubber)

Polyisoprene is the principal constituent of rubber latex which has been estimated globally as one of the major solid wastes. Bacterial bioremediation of this solid waste remains a major point of interest for scientists. This study reports a Gram-positive, non-motile, non-spore-forming actinomycete Gordonia sp. BSTG01, isolated from the bark of Hevea brasiliensis of a rubber plantation garden can considerably degrade natural rubber (NR) and synthetic polyisoprene rubber (SR). Scanning electron microscopy showed adhesive colonization of strain BSTG01 on both natural and synthetic rubber surface, conflating into the rubber and forming a biofilm. Rubber-dependent growth of the strain was examined by the decrease of rubber mass and increase of its total protein content in a time-dependent manner. Degradation was also verified by Schiff's reagent which confirms the appearance of aldehydes in the culture media. Fourier transform infrared spectroscopy including the attenuated total reflectance with the NR and SR pieces overgrown by the isolate revealed variations of the overall chemicals arising on the polyisoprene backbone due to the degradation of rubber by the strain BSTG01. Isolate BSTG01 (MTCC 13159) is a strain of Gordonia and this is the first strain isolated from unexplored rubber plantation area with considerable rubber degradation properties.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s13205-021-03063-5.

Assessment of the Decomposition of Oxo- and Biodegradable Packaging Using FTIR Spectroscopy

The strength and resistance of plastics at the end of their service life can hinder their degradation. The solution to this problem may be materials made of biodegradable and oxo-biodegradable plastics. The aim of this research was to determine the degree and nature of changes in the composition and structure of composted biodegradable and oxo-biodegradable bags. The research involved shopping bags and waste bags available on the Polish market. The composting of the samples was conducted in an industrial composting plant. As a result of the research, only some of the composted samples decomposed. After composting, all samples were analysed using FTIR (Fourier Transformation Infrared) spectroscopy. Carbonyl index and hierarchical cluster analysis method was used to detect similarities between the spectra of the new samples. The analysis of the obtained results showed that FTIR spectroscopy is a method that can be used to confirm the degradation and detect similarities in the structure of the analysed materials. The analysis of spectra obtained with the use of FTIR spectroscopy indicated the presence of compounds that may be a potential source of compost contamination. Plastics with certificates confirming their biodegradability and compostability should be completely biodegradable, i.e., each element used in their production should be biodegradable and safe for the environment.

Waste Natural Polymers as Potential Fillers for Biodegradable Latex-Based Composites: A Review

In recent years, biodegradable composites have become important in various fields because of the increasing awareness of the global environment. Waste natural polymers have received much attention as renewable, biodegradable, non-toxic and low-cost filler in polymer composites. In order to exploit the high potential for residual natural loading in latex composites, different types of surface modification techniques have been applied. This review discusses the preparation and characterization of the modified waste natural fillers for latex-based composites. The potency of the waste natural filler for the latex-based composites was explored with a focus on the mechanical, thermal, biodegradability and filler-latex interaction. This review also offers an update on the possible application of the waste natural filler towards the biodegradability of the latex-based composites for a more sustainable future.

Rubber Degrading Strains: Microtetraspora and Dactylosporangium

Rubber composed of highly unsaturated hydrocarbons, modified through addition of chemicals and vulcanization are widely used to date. However, the usage of rubber, faces many obstacles. These elastomeric materials are difficult to be re-used and recovered, leading to high post-consumer waste and vast environmental problems. Tyres, the major rubber waste source can take up to 80 years to naturally degrade. Experiments show that the latex clearing proteins (Lcp) found in Actinobacteria were reportedly critical for the initial oxidative cleavage of poly(cis-1,4-isoprene), the major polymeric unit of rubber. Although, more than 100 rubber degrading strains have been reported, only 8 Lcp proteins isolated from Nocardia (3), Gordonia (2), Streptomyces (1), Rhodococcus (1), and Solimonas (1) have been purified and biochemically characterized. Previous studies on rubber degrading strains and Lcp enzymes, implied that they are distinct. Following this, we aim to discover additional rubber degrading strains by randomly screening 940 Actinobacterial strains isolated from various locations in Sarawak on natural rubber (NR) latex agar. A total of 18 strains from 5 genera produced clearing zones on NR latex agar, and genes encoding Lcp were identified. We report here lcp genes from Microtetraspora sp. AC03309 (lcp1 and lcp2) and Dactylosporangium sp. AC04546 (lcp1, lcp2, lcp3), together with the predicted genes related to rubber degradation. In silico analysis suggested that Microtetraspora sp. AC03309 is a distinct species closely related to Microtetraspora glauca while Dactylosporangium sp. AC04546 is a species closely related to Dactylosporangium sucinum. Genome-based characterization allowed the establishment of the strains taxonomic position and provided insights into their metabolic potential especially in biodegradation of rubber. Morphological changes and the spectrophotometric detection of aldehyde and keto groups indicated the degradation of the original material in rubber samples incubated with the strains. This confirms the strains' ability to utilize different rubber materials (fresh latex, NR product and vulcanized rubber) as the sole carbon source. Both strains exhibited different levels of biodegradation ability. Findings on tyre utilization capability by Dactylosporangium sp. AC04546 is of interest. The final aim is to find sustainable rubber treatment methods to treat rubber wastes.

Microbial Degradation of Rubber: Actinobacteria

Rubber is an essential part of our daily lives with thousands of rubber-based products being made and used. Natural rubber undergoes chemical processes and structural modifications, while synthetic rubber, mainly synthetized from petroleum by-products are difficult to degrade safely and sustainably. The most prominent group of biological rubber degraders are Actinobacteria. Rubber degrading Actinobacteria contain rubber degrading genes or rubber oxygenase known as latex clearing protein (lcp). Rubber is a polymer consisting of isoprene, each containing one double bond. The degradation of rubber first takes place when lcp enzyme cleaves the isoprene double bond, breaking them down into the sole carbon and energy source to be utilized by the bacteria. Actinobacteria grow in diverse environments, and lcp gene containing strains have been detected from various sources including soil, water, human, animal, and plant samples. This review entails the occurrence, physiology, biochemistry, and molecular characteristics of Actinobacteria with respect to its rubber degrading ability, and discusses possible technological applications based on the activity of Actinobacteria for treating rubber waste in a more environmentally responsible manner.

Biodegradation of Natural Rubber: Microcosm Study

In the present work, natural rubber (NR) biodegradation, by means of a microbial consortium, naturally selected in a tyre dump soil, has been evaluated. To this purpose, prepared soil microcosms were incubated for 236 days, at room temperature, and natural light/dark cycles. The effect of primary C-source and fresh soil addition, soil aeration, and humidity maintenance has been monitored by means of microbiological and respirometric analysis, dry weight loss determinations, and SEM micrographs. During the incubation, in biodegradation microcosms (BD), containing NR samples, the produced CO₂ was significantly higher than that of biotic controls (BC). Furthermore, after 236 days, a NR dry weight loss of 15.6%, in BD microcosms, was registered, about four-fold higher than that registered in BC control (3.7%). Obtained results confirmed that the naturally selected microbial consortium was able to use NR as the only C-source and to biodegrade it. The positive effect of soil mixing evidenced that the biodegradation process was mainly carried out by aerobic biomass, especially filamentous fungi, as confirmed by microbial counts and SEM observations. Results obtained in the microcosm study provided useful information in terms of soil aeration and nutrient amendment in view of a future biodegradation process scale-up.

Biodegradation of natural rubber and deproteinized natural rubber by enrichment bacterial consortia

This study examined the biodegradation of natural rubber (NR) and deproteinized natural rubber (DPNR) by bacterial consortia enriched from a rubber-processing factory's waste in Vietnam. The results reveal the degradation in both NR and DPNR, and the DPNR was degraded easier than NR. The highest weight loss of 48.37% was obtained in the fourth enrichment consortium with DPNR, while 35.39% was obtained in the fifth enrichment consortium with NR after 14 days of incubation. Nitrogen content and fatty acid content determined by Kjeldahl method and fourier transform infrared spectroscopy (FTIR), respectively, were decreased significantly after being incubated with the consortia. Structure of degraded rubber film analyzed by nuclear magnetic resonance spectroscopy showed the presence of aldehyde group, a sign of rubber degradation. Bacterial cells tightly adhering and embedding into NR and DPNR films were observed by scanning electron microscopy. There were differences in the bacterial composition of the consortia with NR and DPNR, which were determined by metagenomic analysis using 16S rRNA gene sequencing. The phyla Bacteroidetes and Proteobacteria may play a role in the degradation of non-isoprene compounds such as protein or lipid, while the phylum Actinobacteria plays a crucial role in the degradation of rubber hydrocarbon in all consortia.

First report of cis-1,4-polyisoprene degradation by Gordonia paraffinivorans

The use of rubber has increased over the years, leading to a series of environmental problems due to its indefinite decomposition time. Bioremediation employing microorganisms have drawn an increasing interest and originated several studies of microbial rubber degradation. Genome sequencing and in silico analysis demonstrated that G. paraffinivorans MTZ041 isolate encodes the lcp gene (Latex Clearing Protein), responsible for expressing an enzyme that performs the first step in the assimilation of synthetic and natural rubber. Growth curves and scanning electron microscopy (SEM) were conducted for MTZ041 in natural (NR) and synthetic rubber (IR) as sole carbon source during 11 weeks. After 80 days, robust growth was observed and SEM analysis revealed the presence of bacilli and the formation of biofilm-like structures on natural and synthetic rubber. This is the first report of a G. paraffinivorans rubber degrader. Given the complexity of this substrate and the relative small number of microorganisms with this ability, the description and characterization of MTZ041 is of great importance on bioremediation processes of rubber products.

Paraquat Degradation From Contaminated Environments: Current Achievements and Perspectives

Paraquat herbicide has served over five decades to control annual and perennial weeds. Despite agricultural benefits, its toxicity to terrestrial and aquatic environments raises serious concerns. Paraquat cannot rapidly degrade in the environment and is adsorbed in clay lattices that require urgent environmental remediation. Advanced oxidation processes (AOPs) and bioaugmentation techniques have been developed for this purpose. Among various techniques, bioremediation is a cost-effective and eco-friendly approach for pesticide-polluted soils. Though several paraquat-degrading microorganisms have been isolated and characterized, studies about degradation pathways, related functional enzymes and genes are indispensable. This review encircles paraquat removal from contaminated environments through adsorption, photocatalyst degradation, AOPs and microbial degradation. To provide in-depth knowledge, the potential role of paraquat degrading microorganisms in contaminated environments is described as well.

Development and Characterization of Bacterial Cellulose Reinforced with Natural Rubber

Films of bacterial cellulose (BC) reinforced by natural rubber (NR) with remarkably high mechanical strength were developed by combining the prominent mechanical properties of multilayer BC nanofibrous structural networks and the high elastic hydrocarbon polymer of NR. BC pellicle was immersed in a diluted NR latex (NRL) suspension in the presence of ethanol aqueous solution. Effects of NRL concentrations (0.5%–10% dry rubber content, DRC) and immersion temperatures (30–70 °C) on the film characteristics were studied. It was revealed that the combination of nanocellulose fibrous networks and NR polymer provided a synergistic effect on the mechanical properties of NR–BC films. In comparison with BC films, the tensile strength and elongation at break of the NR–BC films were considerably improved ~4-fold. The NR–BC films also exhibited improved water resistance over that of BC films and possessed a high resistance to non-polar solvents such as toluene. NR–BC films were biodegradable and could be degraded completely within 5–6 weeks in soil.

Rubber oxygenases

Natural rubber (NR), poly(cis-1,4-isoprene), is used in an industrial scale for more than 100 years. Most of the NR-derived materials are released to the environment as waste or by abrasion of small particles from our tires. Furthermore, compounds with isoprene units in their molecular structures are part of many biomolecules such as terpenoids and carotenoids. Therefore, it is not surprising that NR-degrading bacteria are widespread in nature. NR has one carbon-carbon double bond per isoprene unit and this functional group is the primary target of NR-cleaving enzymes, so-called rubber oxygenases. Rubber oxygenases are secreted by rubber-degrading bacteria to initiate the break-down of the polymer and to use the generated cleavage products as a carbon source. Three main types of rubber oxygenases have been described so far. One is rubber oxygenase RoxA that was first isolated from Xanthomonas sp. 35Y but was later also identified in other Gram-negative rubber-degrading species. The second type of rubber oxygenase is the latex clearing protein (Lcp) that has been regularly found in Gram-positive rubber degraders. Recently, a third type of rubber oxygenase (RoxB) with distant relationship to RoxAs was identified in Gram-negative bacteria. All rubber oxygenases described so far are haem-containing enzymes and oxidatively cleave polyisoprene to low molecular weight oligoisoprenoids with terminal CHO and CO-CH3 functions between a variable number of intact isoprene units, depending on the type of rubber oxygenase. This contribution summarises the properties of RoxAs, RoxBs and Lcps.