Mechanosensitivity of the rat skeleton decreases after a long period of loading, but is improved with time off

Unraveling the physiologic paradoxes that underlie exercise prescription for stress fracture prevention

The effects of exercise on stress fracture risk are paradoxical. Exercise can promote both bone formation and resorption, which in turn, can reduce and increase risk of stress fractures, respectively. We review classic and current literature that suggests that the processes that underlie these responses to exercise are distinct. Bone remodeling involves osteoclastic resorption of fatigue-damaged bone, coupled with subsequent bone deposition to replace the damaged tissue. Bone modeling involves the independent action of osteoblasts and osteoclasts forming or resorbing bone, respectively, on a surface. In the formation mode, modeling results in increased bone stiffness, strength, and resistance to fatigue. Both the remodeling and modeling responses to exercise require significant time for newly deposited bone to fully mineralize. We propose that recognizing these two distinct physiologic pathways and their related time courses reveals the theoretical basis to guide exercise prescription to promote bone health during periods of heightened stress fracture risk. Such guidance may include minimizing rapid increases in the duration of repetitive exercises that may cause fatigue damage accrual, such as long-distance running and marching. Rather, limiting initial exercise characteristics to those known to stimulate bone formation, such as short-duration, moderate-to-high impact, dynamic, and multidirectional activities with rest insertion, may increase the fatigue resistance of bone and consequently minimize stress fracture risk.

Mechanical Stimulation on Mesenchymal Stem Cells and Surrounding Microenvironments in Bone Regeneration: Regulations and Applications

Treatment of bone defects remains a challenge in the clinic. Artificial bone grafts are the most promising alternative to autologous bone grafting. However, one of the limiting factors of artificial bone grafts is the limited means of regulating stem cell differentiation during bone regeneration. As a weight-bearing organ, bone is in a continuous mechanical environment. External mechanical force, a type of biophysical stimulation, plays an essential role in bone regeneration. It is generally accepted that osteocytes are mechanosensitive cells in bone. However, recent studies have shown that mesenchymal stem cells (MSCs) can also respond to mechanical signals. This article reviews the mechanotransduction mechanisms of MSCs, the regulation of mechanical stimulation on microenvironments surrounding MSCs by modulating the immune response, angiogenesis and osteogenesis, and the application of mechanical stimulation of MSCs in bone regeneration. The review provides a deep and extensive understanding of mechanical stimulation mechanisms, and prospects feasible designs of biomaterials for bone regeneration and the potential clinical applications of mechanical stimulation.

Cyclic Distraction–Compression Dynamization Technique Enhances the Bone Formation During Distraction Osteogenesis

Background: Interfragmentary movements have benefits in the improvement of bone formation during distraction osteogenesis (DO). Although several clinical studies reported positive outcomes regarding the application of the cyclic distraction–compression (CDC) dynamization technique in cases with poor bone formation during DO, they are mostly anecdotal without a detailed description. The purpose of this study was to investigate the effectiveness and potential mechanism of different amplitudes and rates of the CDC technique on bone regeneration in a rat femur DO model.

Methods: A total of 60 adult male Sprague-Dawley rats underwent right femoral mid-diaphysis transverse osteotomy and were randomly and evenly divided into Control (no manipulation), Group1 (CDC therapy), Group2 (CDC therapy with larger amplitude), and Group3 (CDC therapy with a slower rate) after distraction. The CDC technique was performed during the middle phase of the consolidation period according to different protocols. Animals were sacrificed after 4 and 6 weeks of consolidation. The process of bone formation was monitored by digital radiographs, and the regenerate bone was evaluated by micro-computed tomography (micro-CT), biomechanical test, and histological analysis. The serum contents of hypoxia-inducible factor (HIF)-1α and vascular endothelial growth factor (VEGF) were measured by enzyme-linked immunosorbent assay (ELISA).

Results: Bone regeneration after the CDC technique was improved significantly during DO. The digital radiograph, micro-CT, histomorphological analysis, and biomechanical evaluation showed better effects regarding volume, continuity, and mechanical properties of the regenerate bone in Group2 and Group3 when compared to Group1. The angiogenic and osteogenic markers were more highly expressed in Group2 and Group3 than in Group1 according to the immunohistochemical analysis. As for ELISA, the serum contents of HIF-1α and VEGF were also increased after the CDC technique, especially in Group2 and Group3.

Conclusion: The CDC dynamization technique has benefits on the improvement of bone formation during DO, and the mechanism may be due to tissue hypoxia activating the HIF pathway followed by the augmentation of osteogenic–angiogenic coupling. Better outcomes may be achieved by moderately increasing the amplitude and slowing down the rate of the CDC technique.

The Wnt pathway: An important control mechanism in bone's response to mechanical loading

The conversion of mechanical energy into biochemical changes within living cells is process known as mechanotransduction. Bone is a quintessential tissue for studying the molecular mechanisms of mechanotransduction, as the skeleton's mechanical competence is crucial for vertebrate movement. Bone cell mechanotransduction is facilitated by a number of cell biological pathways, one of the most prominent of which is the Wnt signaling cascade. The Wnt co-receptor Lrp5 has been identified as a crucial protein for mechanical signaling in bone, and modifiers of Lrp5 activity play important roles in mediating signaling efficiency through Lrp5, including sclerostin, Dkk1, and the co-receptor Lrp4. Mechanical regulation of sclerostin is mediated by certain members of the Hdac family. Other mechanisms that influence Wnt signaling-some of which are mechanoresponsive-are coming to light, including R-spondins and their role in organizing the Rnf43/Znrf3 and Lgr4/5/6 complex that liberates Lrp5. While the identity of the key Wnt proteins involved in bone cell mechanical signaling are elusive, the likely pool of key players is narrowing. Identification of Wnt-based molecular targets that can be modulated pharmacologically to make mechanical stimulation (e.g., exercise) more beneficial is an emerging approach to improving skeletal integrity and reducing fracture risk.

Detraining Effects on Musculoskeletal Parameters in Early Postmenopausal Osteopenic Women: 3-Month Follow-Up of the Randomized Controlled ACTLIFE Study

Periods of absence from supervised group exercise while maintaining physical activity might be a frequent pattern in adults' exercise habits. The aim of the present study was to determine detraining effects on musculoskeletal outcomes after a 3-month detraining period in early post-menopausal, osteopenic women. Due to the COVID-19 pandemic, we terminated the 18-month randomized controlled ACTLIFE exercise intervention immediately after the 13-month follow-up assessment. This put an abrupt stop to the high-intensity aerobic and resistance group exercise sessions undertaken three times per week by the exercise group (EG: n = 27) and the gentle exercise program performed once per week for the attention control group (CG: n = 27); but both groups were permitted to conduct individual outdoor activity for the 3-month lock-down period. Study endpoints were lean body mass (LBM), bone mineral density (BMD) at the lumbar spine (LS), maximum hip-/leg extension strength and power. Detraining-induced reductions of LBM, hip/leg strength and power (but not BMD-LS) were significantly greater (p < 0.001 to p = 0.044) compared with the CG. Significant exercise effects, i.e. differences between EG and CG, present after 13 months of exercise, were lost after 3 months of detraining for LBM (p = 0.157) and BMD-LS (p = 0.065), but not for strength (p < 0.001) and power (p < 0.001). Of note, self-reported individual outdoor activities and exercise increased by about 40% in both groups during the lock-down period. Three months' absence from a supervised group exercise protocol resulted in considerable detraining effects for musculoskeletal parameters. Thus, exercise programs for adults should be continuous rather than intermittent.Trial registration number: ClinicalTrials.gov: NCT04420806, 06.05.2020.

Preventing Bone Stress Injuries in Runners with Optimal Workload

Bone stress injuries (BSIs) occur at inopportune times to invariably interrupt training. All BSIs in runners occur due to an "error" in workload wherein the interaction between the number and magnitude of bone tissue loading cycles exceeds the ability of the tissue to resist the repetitive loads. There is not a single optimal bone workload, rather a range which is influenced by the prevailing scenario. In prepubertal athletes, optimal bone workload consists of low-repetitions of fast, high-magnitude, multidirectional loads introduced a few times per day to induce bone adaptation. Premature sports specialization should be avoided so as to develop a robust skeleton that is structurally optimized to withstand multidirectional loading. In the mature skeleton, optimal workload enables gains in running performance but minimizes bone damage accumulation by sensibly progressing training, particularly training intensity. When indicated (e.g., following repeated BSIs), attempts to reduce bone loading magnitude should be considered, such as increasing running cadence. Determining the optimal bone workload for an individual athlete to prevent and manage BSIs requires consistent monitoring. In the future, it may be possible to clinically determine bone loads at the tissue level to facilitate workload progressions and prescriptions.

The limit of tolerable micromotion for implant osseointegration: a systematic review

Much research effort is being invested into the development of porous biomaterials that enhance implant osseointegration. Large micromotions at the bone-implant interface impair this osseointegration process, resulting in fibrous capsule formation and implant loosening. This systematic review compiled all the in vivo evidence available to establish if there is a universal limit of tolerable micromotion for implant osseointegration. The protocol was registered with the International Prospective Register for Systematic Reviews (ID: CRD42020196686). Pubmed, Scopus and Web of Knowledge databases were searched for studies containing terms relating to micromotion and osseointegration. The mean value of micromotion for implants that osseointegrated was 32% of the mean value for those that did not (112 ± 176 µm versus 349 ± 231 µm, p < 0.001). However, there was a large overlap in the data ranges with no universal limit apparent. Rather, many factors were found to combine to affect the overall outcome including loading time, the type of implant and the material being used. The tables provided in this review summarise these factors and will aid investigators in identifying the most relevant micromotion values for their biomaterial and implant development research.

Detraining effects after 18 months of high intensity resistance training on osteosarcopenia in older men-Six-month follow-up of the randomized controlled Franconian Osteopenia and Sarcopenia Trial (FrOST)

PURPOSE

Detraining after dedicated exercise programs might be a frequent situation in older people's exercise patterns. The aim of the present study was thus to determine the effects of 6 months of detraining after 18 months of high intensity resistance exercise (HIT-RT) on musculoskeletal outcomes in older men with sarcopenia.

METHODS

Community-dwelling men aged 72 years and older with osteosarcopenia (n = 43) were randomly assigned to an 18-month HIT-RT (EG: n = 21) or a non-training control group (CG, n = 22). After the intervention, participants of the EG stopped HIT-RT for 6 months, but continued their habitual physical activity. Study outcomes were skeletal muscle mass index, bone mineral density (BMD) at the lumbar-spine and total-hip, maximum hip/leg-extensor strength, handgrip strength and gait velocity. We applied an intention-to-treat analysis with multiple imputation.

RESULTS

Changes in the HIT-RT were much more pronounced during the detraining period compared with the CG, although this effect was only significant for skeletal muscle mass index and hip-/leg-extensor strength (p = .002 and p = .013), but not for lumbar-spine BMD (p = .068), total-hip BMD (p = .069), handgrip strength (p = .066) or gait velocity (p = .067). Apart from total-hip BMD (p = .055), handgrip strength (p = .069) and gait velocity (p = .881) values of the HIT-RT group decreased significantly during detraining. However, after 24 months, overall effects (p < .001) were still observed for skeletal muscle mass index and hip-/leg-extensor strength.

CONCLUSION

Although unable to state from which point in time relevant detraining effects emerge, we conclude that health care providers should focus on continuous rather than intermitted exercise programs for older people. Clinical trial number: clinicalTrials.gov: NCT03453463; NCT04444661.

Isolated Cyclic Loading During Adolescence Improves Tibial Bone Microstructure and Strength at Adulthood

Bone is a unique living tissue, which responds to the mechanical stimuli regularly imposed on it. Adolescence facilitates a favorable condition for the skeleton that enables the exercise to positively influence bone architecture and overall strength. However, it is still dubious for how long the skeletal benefits gained in adolescence is preserved at adulthood. The current study aims to use a rat model to investigate the effects of in vivo low- (LI), medium- (MI), and high- (HI) intensity cyclic loadings applied during puberty on longitudinal bone development, morphometry, and biomechanics during adolescence as well as at adulthood. Forty-two young (4-week-old) male rats were randomized into control, sham, LI, MI, and HI groups. After a 5 day/week for 8 weeks cyclic loading regime applied on the right tibia, loaded rats underwent a subsequent 41-week, normal cage activity period. Right tibias were removed at 52 weeks of age, and a comprehensive assessment was performed using μCT, mechanical testing, and finite element analysis. HI and MI groups exhibited reduced body weight and food intake at the end of the loading period compared with shams, but these effects disappeared afterward. HI cyclic loading increased BMD, bone volume fraction, trabecular thickness, trabecular number, and decreased trabecular spacing after loading. All loading-induced benefits, except BMD, persisted until the end of the normal cage activity period. Moreover, HI loading induced enhanced bone area, periosteal perimeter, and moment of inertia, which remained up to the 52nd week. After the normal cage activity at adulthood, the HI group showed increased ultimate force and stress, stiffness, postyield displacement and energy, and toughness compared with the sham group. Overall, our findings suggest that even though both trabecular and cortical bone drifted through age-related changes during aging, HI cyclic loading performed during adolescence can render lifelong benefits in bone microstructure and biomechanics. © 2020 The Authors. JBMR Plus published by Wiley Periodicals, Inc. on behalf of American Society for Bone and Mineral Research.

[Training methods and trainability]

BACKGROUND

The need for effective training methods for positive adaptations in muscle strength and bone mineralization, suitable for all groups of patients, arises in both rehabilitation and pre-habilitation. In addition to mechanical stress, an increased metabolic stress, by means of reduced blood supply of the muscle, seems to induce positive adaptations as well.

OBJECTIVES

Description of the effects of resistance training and opportunities of blood-flow restriction training in a clinical setting.

METHODS

Key and specialized literature RESULTS: Regularly applied high mechanical loads are suitable to induce increases in muscle strength and mass as well as bone mineralization. In principle, the trainability of these tissues is given over the entire life span, although the adaptation of the muscle mass is reduced in the prepubertal and later stages of life. Classic strength training is particularly suitable as a training method to apply this stimulus quality (mechanical stress). For some years now, however, there has been increasing evidence that even low-intensity resistance training associated with metabolic stress is capable of producing hypertrophic effects and increasing muscle strength. This observation is particularly interesting for target groups whose mechanical capacity of the musculoskeletal system is reduced. Blood-flow-restriction training is particularly suitable as a training method for the application of this stimulus quality (metabolic stress). The data available on the effectiveness of low-intensity stress protocols on bone structure is still insufficient. Further research is needed to make evidence-based recommendations.

Application of Blood Flow Restriction to Optimize Exercise Countermeasures for Human Space Flight

In recent years there has been a strong increase in publications on blood flow restriction (BFR) training. In particular, the fact that this type of training requires only low resistance to induce muscle strength and mass gains, makes BFR training interesting for athletes and scientists alike. For the same reason this type of training is particularly interesting for astronauts working out in space. Lower resistance during training would have the advantage of reducing the risk of strain-induced injuries. Furthermore, strength training with lower resistances would have implications for the equipment required for training under microgravity conditions, as significantly lower resistances have to be provided by the training machines. Even though we are only about to understand the effects of blood flow restriction on exercise types other than low-intensity strength training, the available data indicate that BFR of leg muscles is also able to improve the training effects of walking or running at slow speeds. The underlying mechanisms of BFR-induced functional and structural adaptations are still unclear. An essential aspect seems to be the premature fatigue of Type-I muscle fibers, which requires premature recruitment of Type-II muscle fibers to maintain a given force output. Other theories assume that cell swelling, anabolic hormones, myokines and reactive oxygen species are involved in the mediation of BFR training-related effects. This review article is intended to summarize the main advantages and disadvantages, but also the potential risks of such training for astronauts.

In Vivo Models of Mechanical Loading

The skeleton fulfils its mechanical functions through structural organization and material properties of individual bones. It is stated that both cortical and trabecular morphology and mass can be (re)modelled in response to changes in mechanical strains engendered by load-bearing. To address this, animal models that enable the application of specific loads to individual bones have been developed. These are useful in defining how loading modulates (re)modeling and allow examination of the mechanisms that coordinate these events. This chapter describes how to apply mechanical loading to murine bones through points of articulation, which allows changes in endosteal, periosteal as well as trabecular bone to be revealed at multiple hierarchies, by a host of methodologies, including double fluorochrome labeling and computed tomography.

MRI bone marrow oedema precedes lumbar bone stress injury diagnosis in junior elite cricket fast bowlers

OBJECTIVES

Lumbar bone stress injury ('bone stress injury') is common in junior fast bowlers. The repetitive loading of cricket fast bowling may cause bone marrow oedema (BMO), detectable on MRI, before the bowler suffers from symptomatic bone stress injury. We investigated the temporal relationship between BMO, bone stress injury, along with bowling workload correlates, in elite junior fast bowlers throughout a cricket season.

METHODS

65 junior fast bowlers were prospectively monitored for one 8-month cricket season. For research purposes, participants had up to six MRI scans at set times in the season; findings were withheld from them and their clinicians. Standard practices for bowling workload monitoring and injury diagnosis were followed.

RESULTS

15 (23%) participants developed bone stress injury during the study. All 15 of these participants had BMO detected on at least one of the preceding MRI scans, including the scan immediately prior to diagnosis. The risk of BMO progressing to bone stress injury during the season was greatest for participants with BMO present 2 weeks prior to the national championship tournament (period of high load) (RR=18.9, OR=44.8). Both bone stress injury and BMO were associated with bowling a higher percentage of days in training and having a shorter bowling break during the season. The number of balls bowled and acute-to-chronic workload were not associated with imaging abnormalities or injury.

CONCLUSION

The presence of BMO on MRI in asymptomatic junior cricket fast bowlers confers a very high risk for bone stress injury. The risk may be managed by MRI screening and monitoring bowling frequency.

Combined mineral-supplemented diet and exercise increases bone mass and strength after eight weeks and maintains increases after eight weeks detraining in adult mice

Exercise has long-lasting benefits to bone mass and structural strength even after cessation. Combining exercise with a calcium- and phosphorus-supplemented diet increases cortical bone mineral content (BMC), area, and yield force more than exercise alone in adult mice. These increases could also be maintained after stopping exercise if the modified diet is maintained. It was hypothesized that combining exercise with a mineral-supplemented diet would lead to greater cortical BMC, area, and yield force immediately after a lengthy exercise program and after an equally long period of non-exercise (detraining) in adult mice. Male, 16-week old C57Bl/6 mice were assigned to 9 weight-matched groups–a baseline group, exercise and non-exercise groups fed a control or mineral-supplemented diet for 8 weeks, exercise + detraining and non-exercise groups fed a control or mineral-supplemented diet for 16 weeks. Exercise + detraining consisted of 8 weeks of exercise followed by 8 weeks without exercise. The daily exercise program consisted of running on a treadmill at 12 m/min, 30 min/day. After 8 weeks, mice fed the supplemented diet had greater tibial cortical BMC and area, trabecular bone volume/tissue volume (BV/TV), bone mineral density (vBMD), yield force, and ultimate force than mice fed the control diet. Exercise increased cortical BMC and area only when coupled with the supplemented diet. After 16 weeks, both exercised and non-exercised mice fed the supplemented diet maintained greater tibial cortical BMC and area, trabecular BV/TV, vBMD, yield force, and ultimate force than mice fed the control diet. Combining exercise with a mineral-supplemented diet leads to greater bone mass and structural strength than exercise alone. These benefits remain after an equally long period of detraining. Long-term use of dietary mineral supplements may help increase and maintain bone mass with aging in adult mice.

Temporal mechanically-induced signaling events in bone and dorsal root ganglion neurons after in vivo bone loading

Mechanical signals play an integral role in the regulation of bone mass and functional adaptation to bone loading. The osteocyte has long been considered the principle mechanosensory cell type in bone, although recent evidence suggests the sensory nervous system may play a role in mechanosensing. The specific signaling pathways responsible for functional adaptation of the skeleton through modeling and remodeling are not clearly defined. In vitro studies suggest involvement of intracellular signaling through mitogen-activated protein kinase (MAPK), phosphatidylinositol 3-kinase (PI3K)/protein kinase B (Akt), and mammalian target of rapamycin (mTOR). However, anabolic signaling responses to bone loading using a whole animal in vivo model have not been studied in detail. Therefore, we examined mechanically-induced signaling events at five time points from 0 to 24 hours after loading using the rat in vivo ulna end-loading model. Western blot analysis of bone for MAPK's, PI3K/Akt, and mTOR signaling, and quantitative reverse transcription polymerase chain reaction (qRT-PCR) to estimate gene expression of calcitonin gene-related protein alpha (CGRP-α), brain-derived neurotrophic factor (BDNF), nerve growth factor (NGF), c-jun, and c-fos in dorsal root ganglion (DRG) of the brachial intumescence were performed. There was a significant increase in signaling through MAPK's including extracellular signal-related kinase (ERK) and c-Jun N-terminal kinase (JNK) in loaded limbs at 15 minutes after mechanical loading. Ulna loading did not significantly influence expression of the genes of interest in DRG neurons. Bone signaling and DRG gene expression from the loaded and contralateral limbs was correlated (SR>0.40, P<0.05). However, bone signaling did not correlate with expression of the genes of interest in DRG neurons. These results suggest that signaling through the MAPK pathway may be involved in load-induced bone formation in vivo. Further characterization of the molecular events involved in regulation of bone adaptation is needed to understand the timing and impact of loading events, and the contribution of the neuronal signaling to functional adaptation of bone.

Mechanisms of bone response to injury

Bone, despite its relatively inert appearance, is a tissue that is capable of adapting to its environment. Wolff’s law, first described in the 19th century, describes the ability of bone to change structure depending on the mechanical forces applied to it. The mechanostat model extended this principle and suggested that the amount of strain a bone detects depends on bone strength and the amount of muscle force applied to the bone. Experimental studies have found that low-magnitude, high-frequency mechanical loading is considered to be the most effective at increasing bone formation. The osteocyte is considered to be the master regulator of the bone response to mechanical loading. Deformation of bone matrix by mechanical loading is thought to result in interstitial fluid flow within the lacunar–canalicular system, which may activate osteocyte mechanosensors, leading to changes in osteocyte gene expression and ultimately increased bone formation and decreased bone resorption. However, repetitive strain applied to bone can result in microcracks, which may propagate and coalesce, and if not repaired predispose to catastrophic fracture. Osteocytes are a key component in this process, whereby apoptotic osteocytes in an area of microdamage promote targeted remodeling of the damaged bone. If fractures do occur, fracture repair can be divided into 2 types: primary and secondary healing. Secondary fracture repair is the most common and is a multistage process consisting of hematoma formation and acute inflammation, callus formation, and finally remodeling, whereby bone may return to its original form.

Revisiting the Debate: Does Exercise Build Strong Bones in the Mature and Senescent Skeleton?

Traditional exercise programs seem to be less osteogenic in the mature and post-mature skeleton compared to the young skeleton. This is likely because of the decline in sensitivity of bone to mechanical loading that occurs with advancing age. Another factor contributing to the apparently diminished benefit of exercise in older adults is failure of widely used measurement techniques (i.e., DXA) to identify changes in 3-dimensional bone structure, which are important determinants of bone strength. Moreover, although hormonal contributors to bone loss in the elderly are well-recognized, the influence of age-related increases in sympathetic nervous system activity, which impacts bone metabolism, is rarely considered. In this Perspective, we cite evidence from animal and human studies demonstrating anabolic effects of exercise on bone across the lifespan and we discuss theoretical considerations for designing exercise regimens to optimize bone health. We conclude with suggestions for future research that should help define the osteogenic potential of exercise in older individuals.

Administration duration influences the effects of low-magnitude, high-frequency vibration on ovariectomized rat bone

Low-magnitude, high-frequency vibration (LMHFV) has been proposed as a non-drug anti-osteoporosis treatment. However, the influence of administration duration on its effect is seldom investigated. In this study, the effect of 16-week LMHFV (0.3 g, 30 Hz, 20 min/day) on the bone mineral densities (BMDs), bone mechanical properties, and cellular responses of osteoporotic and healthy rats was examined by in vivo peripheral quantitative computed tomography (pQCT), fracture tests, cell assays, and mRNA quantification. Forty-eight adult rats were equally assigned to sham surgery (SHM), sham surgery with LMHFV (SHM+V), ovariectomy (OVX), and ovariectomy with LMHFV (OVX+V) groups. At week 8, LMHFV ameliorated ovariectomy-induced deterioration of trabecular bone, with a significantly higher tibia trabecular BMD (+11.2%) being noted in OVX+V rats (vs. OVX). However, this positive effect was not observed at later time points. Furthermore, 16 weeks of LMHFV caused significant reductions in the vertebral mean BMD (-13.0%), trabecular BMD (-15.7%), and maximum load (-21.5%) in OVX+V rats (vs. OVX). Osteoblasts derived from osteoporotic rat bone explants showed elevated BSP and OSX mRNA expression induced by LMHFV on day 1. However, no further positive effect on osteoblastic mRNA expression, alkaline phosphatase activity, or calcium deposition was observed with prolonged culture time. A higher ratio of RANKL/OPG induced by LMHFV suggests that osteoclastogenesis may be activated. Together, these results demonstrate that administration duration played an important role in the effect of LMHFV. Early exposure to LMHFV can positively modulate osteoporotic bone and osteoblasts; however, the beneficial effect seems not to persist over time. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:1147-1157, 2016.

Predicting cortical bone adaptation to axial loading in the mouse tibia

The development of predictive mathematical models can contribute to a deeper understanding of the specific stages of bone mechanobiology and the process by which bone adapts to mechanical forces. The objective of this work was to predict, with spatial accuracy, cortical bone adaptation to mechanical load, in order to better understand the mechanical cues that might be driving adaptation. The axial tibial loading model was used to trigger cortical bone adaptation in C57BL/6 mice and provide relevant biological and biomechanical information. A method for mapping cortical thickness in the mouse tibia diaphysis was developed, allowing for a thorough spatial description of where bone adaptation occurs. Poroelastic finite-element (FE) models were used to determine the structural response of the tibia upon axial loading and interstitial fluid velocity as the mechanical stimulus. FE models were coupled with mechanobiological governing equations, which accounted for non-static loads and assumed that bone responds instantly to local mechanical cues in an on–off manner. The presented formulation was able to simulate the areas of adaptation and accurately reproduce the distributions of cortical thickening observed in the experimental data with a statistically significant positive correlation (Kendall's τ rank coefficient τ = 0.51, p < 0.001). This work demonstrates that computational models can spatially predict cortical bone mechanoadaptation to a time variant stimulus. Such models could be used in the design of more efficient loading protocols and drug therapies that target the relevant physiological mechanisms.

Rest intervals reduce the number of loading bouts required to enhance bone formation

PURPOSE

As our society becomes increasingly sedentary, compliance with exercise regimens that require numerous high-energy activities each week become less likely. Alternatively, given an osteogenic exercise intervention that required minimal effort, it is reasonable to presume that participation would be enhanced. Insertion of brief rest intervals between each cycle of mechanical loading holds potential to achieve this result because substantial osteoblast function is activated by many fewer loading repetitions within each loading bout. Here, we examined the complementary hypothesis that the number of bouts per week of rest-inserted loading could be reduced from three bouts per week without loss of osteogenic efficacy.

METHODS

We conducted a series of 3-wk in vivo experiments that noninvasively exposed the right tibiae of mice to either cyclic (1 Hz) or rest-inserted loading interventions and quantified osteoblast function via dynamic histomorphometry.

RESULTS

Although reducing loading bouts from three bouts per week (i.e., nine total bouts) to one bout per week (i.e., three total bouts) effectively mitigated the osteogenic benefit of cyclic loading, the same reduction did not significantly reduce periosteal bone formation parameters induced by rest-inserted loading. The osteogenic response was robust to the timing of the rest-inserted loading bouts (three bouts in the first week vs one bout per week for 3 wk). However, elimination of any single bout of the three one-bout-per-week bouts mitigated the osteogenic response to rest-inserted loading. Finally, periosteal osteoblast function assessed after the 3-wk intervention was not sensitive to the timing or number of rest-inserted loading bouts.

CONCLUSIONS

We conclude that rest-inserted loading holds potential to retain the osteogenic benefits of mechanical loading with significantly reduced frequency of bouts of activity while also enabling greater flexibility in the timing of the activity.

Preclinical mouse models for assessing axial compression of long bones during exercise

The aim of this laboratory method is to describe two approaches for the investigation of bone responses to mechanical loading in mice in vivo. The first is running exercise, because it is easily translatable clinically, and the second is axial compression of the tibia, because it is precisely controllable. The effects of running exercise, and in general physical activity, on bone tissue have been shown to be both direct through mechanical loading (ground impact and muscle tension) and indirect through metabolic changes. Therefore, running exercise has been considered the most convenient preclinical model for demonstrating the general idea that exercise is good for bone health, either early in age for increasing peak bone mass or later in age by slowing down bone loss. However, numerous combinations of protocols have been reported, which makes it difficult to formulate a simple take-home message. This laboratory method also provides a detailed description of in vivo direct mechanical axial compression of the mouse tibia. The effects of mechanical loading depend on the force (strain), frequency, waveform and duration of application, and they range from bone anabolism with low bone remodeling, inducing lamellar bone accumulation, to bone catabolism with high bone remodeling, leading to microdamage, woven bone formation and bone loss. Direct in vivo loading models are extensively used to study mechanotransduction pathways, and contribute by this way to the development of new bone anabolism treatments. Although it is particularly difficult to assemble an internationally adopted protocol description, which would give reproducible bone responses, here we have attempted to provide a comprehensive guide for best practice in performing running exercise and direct in vivo mechanical loading in the laboratory.

The Accordion Maneuver: A Noninvasive Strategy for Absent or Delayed Callus Formation in Cases of Limb Lengthening

The distraction osteogenesis (DO) technique has been used worldwide to treat many orthopaedic conditions. Although successful, absent or delayed callus formation in the distraction gap can lead to significant morbidities. An alternate cycle of distraction-compression (accordion maneuver) is one approach to accelerate bone regeneration. The primary aim of our study is to report our experience with the accordion maneuver during DO and to provide a detailed description of this technique, as performed in our center. The secondary aim is to present a review of the literature regarding the use of accordion maneuver. We reviewed the database of all patients undergoing limb lengthening from the year of 1997 to 2012. Four patients (6.15%) out of 65 showed poor bone regenerate in their tibiae and therefore accordion maneuver was applied for a mean of 6.75 weeks. Of these, three patients have had successful outcome with this technique. The literature showed that this technique is successful approach to trigger bone healing. However, details of how and when to apply this combination of distraction-compression forces were lacking. In conclusion, the accordion technique is safe noninvasive approach to promote bone formation, thus avoiding more invasive surgical procedures in cases of poor callus formation in limb lengthening.

Effectiveness of resistance training or jumping-exercise to increase bone mineral density in men with low bone mass: A 12-month randomized, clinical trial

PURPOSE

To examine the effects of 12 mo of resistance training (RT, 2×/wk, N=19) or jump training (JUMP, 3×/wk, N=19) on bone mineral density (BMD) and bone turnover markers (BTM) in physically active (≥ 4h/wk) men (mean age: 44 ± 2 y; median: 44 y) with osteopenia of the hip or spine.

METHODS

Participants rated pain and fatigue following each RT or JUMP session. All participants received supplemental calcium (1200 mg/d) and vitamin D (10 μg/d). BMD was measured at 0, 6, and 12 mo using DXA scans of the whole body (WB), total hip (TH) and lumbar spine (LS). BTM and 25 OHD were measured by ELISA. The effects of RT or JUMP on BMD and BTM were evaluated using 3x2 repeated measures ANOVA (time, group). This study was conducted in accordance with the Declaration of Helsinki and was approved by the University of Missouri IRB.

RESULTS

At baseline, 36 of 38 participants were vitamin D sufficient (25OHD >50 nmol/L); at 12 mo, all participants were 25OHD sufficient. 25OHD did not differ between groups. WB and LS BMD significantly increased after 6 months of RT or JUMP and this increase was maintained at 12 mo; TH BMD increased only in RT. Osteocalcin increased significantly after 12 mo of RT or JUMP; CTx decreased significantly after 6 mo and returned to baseline concentrations at 12 mo in both RT and JUMP. Pain and fatigue ratings after RT or JUMP sessions were very low at 0, 6, and 12 mo.

CONCLUSION

RT or JUMP, which appeared safe and feasible, increased BMD of the whole body and lumbar spine, while RT also increased hip BMD, in moderately active, osteopenic men.

Role of calcitonin gene-related peptide in functional adaptation of the skeleton

Peptidergic sensory nerve fibers innervating bone and periosteum are rich in calcitonin gene-related peptide (CGRP), an osteoanabolic neurotransmitter. There are two CGRP isoforms, CGRPα and CGRPβ. Sensory fibers are a potential means by which the nervous system may detect and respond to loading events within the skeleton. However, the functional role of the nervous system in the response of bone to mechanical loading is unclear. We used the ulna end-loading model to induce an adaptive modeling response in CGRPα and CGRPβ knockout mouse lines and their respective wildtype controls. For each knockout mouse line, groups of mice were treated with cyclic loading or sham-loading of the right ulna. A third group of mice received brachial plexus anesthesia (BPA) of the loaded limb before mechanical loading. Fluorochrome labels were administered at the time of loading and 7 days later. Ten days after loading, bone responses were quantified morphometrically. We hypothesized that CGRP signaling is required for normal mechanosensing and associated load-induced bone formation. We found that mechanically-induced activation of periosteal mineralizing surface in mice and associated blocking with BPA were eliminated by knockout of CGRPα signaling. This effect was not evident in CGRPβ knockout mice. We also found that mineral apposition responses to mechanical loading and associated BPA blocking were retained with CGRPα deletion. We conclude that activation of periosteal mineralizing surfaces in response to mechanical loading of bone is CGRPα-dependent invivo. This suggests that release of CGRP from sensory peptidergic fibers in periosteum and bone has a functional role in load-induced bone formation.

Bone adaptation to cyclic loading in murine caudal vertebrae is maintained with age and directly correlated to the local micromechanical environment

The ability of the skeleton to adapt to mechanical stimuli (mechanosensitivity) has most often been investigated at the whole-bone level, but less is known about the local mechanoregulation of bone remodeling at the bone surface, especially in context of the aging skeleton. The aim of this study was to determine the local and global mechanosensitivity of the sixth caudal vertebra during cyclic loading (8 N, three times per week, for six weeks) in mice aged 15, 52, and 82 weeks at the start of loading. Bone adaptation was monitored with in vivo micro-computed tomography. Strain energy density (SED), assumed as the mechanical stimulus for bone adaptation, was determined with micro-finite element models. Mechanical loading had a beneficial effect on the bone microstructure and bone stiffness in all age groups. Mineralizing surface was on average 13% greater (p<0.05) in loaded than control groups in 15- and 82-week-old mice, but not for 52-week-old mice. SED at the start of loading correlated to the change in bone volume fraction in the following 6 weeks for loaded groups (r(2)=0.69-0.85) but not control groups. At the local level, SED was 14-20% greater (p<0.01) at sites of bone formation, and 15-20% lower (p<0.01) at sites of bone resorption compared to quiescent bone surfaces for all age groups, indicating SED was a stimulus for bone adaptation. Taken together, these results support that mechanosensitivity is maintained with age in caudal vertebrae of mice at a local and global level. Since age-related bone loss was not observed in caudal vertebrae, results from the current study might not be translatable to aged humans.

Inserted rest period resensitizes MC3T3-E1 cells to fluid shear stress in a time-dependent manner via F-actin-regulated mechanosensitive channel(s)

The underlying cellular mechanism of anabolic effect recovered by inserting rest is not fully understood. In this work, we studied the role of F-actin regulated mechanosensitive channel(s) re-activation in mechanosensitivity modulation in vitro. Results showed that steady fluid shear stress (sFSS) stimulation with 30-min rest period was more potential in increasing alkalinephosphatase (ALP) activity than 10 and 0-min rest periods, and insertion of 30 min, but not 0 or 10 min, recovered the [Ca(2+)]i transient and contribution of the mechanosensitive channel(s). During the rest period, F-actin experienced polymerization (0-10 min), followed by depolymerization (10-30 min); inhibition of F-actin polymerization/depolymerization significantly increased/decreased the [Ca(2+)]i transient, as well as the contribution of the mechanosensitive channel(s) in subsequent sFSS stimulation. Our results demonstrated that the long rest period between sFSS loadings recruited [Ca(2+)]i transient via F-actin depolymerization-induced reactivation of mechanosensitive channel(s), suggesting that F-actin-regulated cellular stiffness could account for the decreased anabolic response during continuous mechanical loading in bone cells.

Seven day insertion rest in whole body vibration improves multi-level bone quality in tail suspension rats

Objective

This study aimed to investigate the effects of low-magnitude, high-frequency vibration with rest days on bone quality at multiple levels.

Methods

Forty-nine three-month-old male Wistar rats were randomly divided into seven groups, namely, vibrational loading for X day followed by X day rest (VLXR, X = 1, 3, 5, 7), vibrational loading every day (VLNR), tail suspension (SPD), and baseline control (BCL). One week after tail suspension, rats were loaded by vibrational loading (35 Hz, 0.25 g, 15 min/day) except SPD and BCL. Fluorescence markers were used in all rats. Eight weeks later, femora were harvested to investigate macromechanical properties, and micro-computed tomography scanning and fluorescence test were used to evaluate microarchitecture and bone growth rate. Atomic force microscopy analyses and nanoindentation test were used to analyze the nanostructure and mechanical properties of bone material, respectively. Inductively coupled plasma optical emission spectroscopy was used for quantitative chemical analyses.

Results

Microarchitecture, mineral apposition rate and bone formation rate and macromechanical properties were improved in VL7R. Grain size and roughness were significantly different among all groups. No statistical difference was found for the mechanical properties of the bone material, and the chemical composition of all groups was almost similar.

Conclusions

Low-magnitude, high-frequency vibration with rest days altered bone microarchitecture and macro-biomechanical properties, and VL7R was more efficacious in improving bone loss caused by mechanical disuse, which provided theoretical basis and explored the mechanisms of vibration for improving bone quality in clinics.

The Contribution of Experimental in vivo Models to Understanding the Mechanisms of Adaptation to Mechanical Loading in Bone

Changing loading regimens by natural means such as exercise, with or without interference such as osteotomy, has provided useful information on the structure:function relationship in bone tissue. However, the greatest precision in defining those aspects of the overall strain environment that influence modeling and remodeling behavior has been achieved by relating quantified changes in bone architecture to quantified changes in bones' strain environment produced by direct, controlled artificial bone loading. Jiri Hert introduced the technique of artificial loading of bones in vivo with external devices in the 1960s using an electromechanical device to load rabbit tibiae through transfixing stainless steel pins. Quantifying natural bone strains during locomotion by attaching electrical resistance strain gages to bone surfaces was introduced by Lanyon, also in the 1960s. These studies in a variety of bones in a number of species demonstrated remarkable uniformity in the peak strains and maximum strain rates experienced. Experiments combining strain gage instrumentation with artificial loading in sheep, pigs, roosters, turkeys, rats, and mice has yielded significant insight into the control of strain-related adaptive (re)modeling. This diversity of approach has been largely superseded by non-invasive transcutaneous loading in rats and mice, which is now the model of choice for many studies. Together such studies have demonstrated that over the physiological strain range, bone's mechanically adaptive processes are responsive to dynamic but not static strains; the size and nature of the adaptive response controlling bone mass is linearly related to the peak loads encountered; the strain-related response is preferentially sensitive to high strain rates and unresponsive to static ones; is most responsive to unusual strain distributions; is maximized by remarkably few strain cycles, and that these are most effective when interrupted by short periods of rest between them.

Trabecular bone adapts to long-term cyclic loading by increasing stiffness and normalization of dynamic morphometric rates

Bone has the ability to adapt to external loading conditions. Especially the beneficial effect of short-term cyclic loading has been investigated in a number of in vivo animal studies. The aim of this study was to assess the long-term effect (>10 weeks) of cyclic mechanical loading on the bone microstructure, bone stiffness, and bone remodeling rates. Mice were subjected to cyclic mechanical loading at the sixth caudal vertebra with 8N or 0N (control) three times per week for a total period of 14 weeks. Structural bone parameters were determined from in vivo micro-computed tomography (micro-CT) scans performed at week 0, 4, 6, 8, 10, 12, and 14. Mechanical parameters were derived from micro-finite element analysis. Dynamic bone morphometry was calculated using registration of serial micro-CT scans. Bone volume fraction and trabecular thickness increased significantly more for the loaded group than for the control group (p = 0.006 and p = 0.002 respectively). The trabecular bone microstructure adapted to the load of 8N in approximately ten weeks, indicated by the trabecular bone volume fraction, which increased from 16.7% at 0 weeks to 21.6% at week 10 and only showed little change afterwards (bone volume fraction of 21.5% at 14 weeks). Similarly bone stiffness - (at the start of the experiment 649N/mm) - reached 846N/mm at 10 weeks in the loaded group and was maintained to the end of the experiment (850N/mm). At 4 weeks the bone formation rate was 32% greater and the bone resorption rate 22% less for 8N compared to 0N. This difference was significantly reduced as the bone adapted to 8N, with 8N remodeling rates returning to the values of the 0N group at approximately 10 weeks. Together these data suggest that once bone has adapted to a new loading state, the remodeling rates reduce gradually while maintaining bone volume fraction and stiffness.

Cortical and trabecular bone adaptation to incremental load magnitudes using the mouse tibial axial compression loading model

The mouse tibial axial compression loading model has recently been described to allow simultaneous exploration of cortical and trabecular bone adaptation within the same loaded element. However, the model frequently induces cortical woven bone formation and has produced inconsistent results with regards to trabecular bone adaptation. The aim of this study was to investigate bone adaptation to incremental load magnitudes using the mouse tibial axial compression loading model, with the ultimate goal of revealing a load that simultaneously induced lamellar cortical and trabecular bone adaptation. Adult (16 weeks old) female C57BL/6 mice were randomly divided into three load magnitude groups (5, 7 and 9N), and had their right tibia axially loaded using a continuous 2-Hz haversine waveform for 360 cycles/day, 3 days/week for 4 consecutive weeks. In vivo peripheral quantitative computed tomography was used to longitudinally assess midshaft tibia cortical bone adaptation, while ex vivo micro-computed tomography and histomorphometry were used to assess both midshaft tibia cortical and proximal tibia trabecular bone adaptation. A dose response to loading magnitude was observed within cortical bone, with increasing load magnitude inducing increasing levels of lamellar cortical bone adaptation within the upper two thirds of the tibial diaphysis. Greatest cortical bone adaptation was observed at the midshaft where there was a 42% increase in estimated mechanical properties (polar moment of inertia) in the highest (9N) load group. A dose response to load magnitude was not clearly evident within trabecular bone, with only the highest load (9N) being able to induce measureable adaptation (31% increase in trabecular bone volume fraction at the proximal tibia). The ultimate finding was that a load of 9N (engendering a tensile strain of 1833 με on medial surface of the midshaft tibia) was able to simultaneously induce measurable lamellar cortical and trabecular bone adaptation when using the mouse tibial axial compression loading model in 16 week old female C57BL/6 mice. This finding will help plan future studies aimed at exploring simultaneous lamellar cortical and trabecular bone adaptation within the same loaded element.

High-frequency and low-magnitude whole body vibration with rest days is more effective in improving skeletal micro-morphology and biomechanical properties in ovariectomised rodents

We explored the optimal regime in preventing or treating bone loss, using ovariectomised rodents loaded by mechanical stimuli with rest days during the loading cycle. Eighty-four Sprague-Dawley rats, aged 6 months, were randomly divided into 7 groups after bilateral ovariectomy. Mechanical vibration with 1-day rest (ML1R), with 3-day rest (ML3R), with 5-day rest (ML5R), with 7-day rest (ML7R), daily loading (DL), comparing the ovariectomised group (OVX) with baseline (BCL) measurements. After a recovery of one week, all the rodents were loaded daily by whole body vibration at 35 Hz and 0.25 g for 15 minutes. Eight weeks later, a three-point bending test of the radius and micro-CT scanning of the femoral head were performed after animal sacrifice. Large improvements in biomechanical properties occurred in all the experimental groups for failure load, elastic modulus and deflection, while a significantly enhanced efficacy was detected in ML7R compared with daily loading (p<0.05). In micro-CT scanning, bone volume fraction, trabecular thickness, number and separation were improved by the regime in all experimental groups, while ML7R showed a significant improvement over daily loading (p<0.05). Early bone loss in human subjects may be improved by high-frequency and low-magnitude whole body vibration with rest days or daily stimuli. Mechanical stimulus with a 7-day rest was more effective in improving biomechanical properties and micro-morphology compared with daily loading. This may have clinical implications in relation to the prevention and treatment of hip fractures, and in postoperative management following hip arthroplasty.

Systemic treatment with pulsed electromagnetic fields do not affect bone microarchitecture in osteoporotic rats

Purpose

Pulsed electromagnetic fields (PEMF) are currently used in the treatment of spinal fusions and non-unions. There are indications that PEMF might also be effective in the treatment of osteoporosis. In this study we examined whether whole-body PEMF treatment affects the bone microarchitecture in an osteoporotic rat model.

Methods

Twenty-week-old female rats were ovariectomised (n = 20). Four different PEMF treatment protocols based on previous experimental studies and based on clinically used PEMF signals were examined (2 h/day, 5 days/week). A control group did not receive PEMF. At zero, three and six weeks cancellous and cortical bone architectural changes at the proximal tibia were evaluated using in vivo microCT scanning.

Results

PEMF treatment did not induce any changes in cancellous or cortical bone compared to untreated controls.

Conclusions

Although previous studies have shown strong effects of PEMF in osteoporosis we were unable to demonstrate this in any of the treatment protocols. Using in vivo microCT scanning we were able to identify small bone changes in time. Subtle differences in the experimental set-up might explain the differences in study outcomes in the literature. Since PEMF treatment is safe, future experimental studies on the effect of PEMF on bone can better be performed directly on humans, eliminating the potential translation issues between animals and humans. In this study we found no support for the use of PEMF in the treatment of osteoporosis.

Low-magnitude whole body vibration does not affect bone mass but does affect weight in ovariectomized rats

Mechanical loading has stimulating effects on bone architecture, which can potentially be used as a therapy for osteoporosis. We investigated the skeletal changes in the tibia of ovariectomized rats during treatment with whole body vibration (WBV). Different low-magnitude WBV treatment protocols were tested in a pilot experiment using ovariectomized rats with loading schemes of 2 × 8 min/day, 5 days/week (n = 2 rats per protocol). Bone volume and architecture were evaluated during a 10 week follow-up using in-vivo microcomputed tomography scanning. The loading protocol in which a 45 Hz sine wave was applied at 2 Hz with an acceleration of 0.5g showed an anabolic effect on bone and was therefore further analyzed in two groups of animals (n = 6 each group) with WBV starting directly after or 3 weeks after ovariectomy and compared to a control (non-WBV) group at 0, 3, 6 and 10 weeks' follow-up. In the follow-up experiment the WBV stimulus did not significantly affect trabecular volume fraction or cortical bone volume in any of the treatment groups during the 10 week follow-up. WBV did reduce weight gain that was induced as a consequence of ovariectomy. We could not demonstrate any significant effects of WBV on bone loss as a consequence of ovariectomy in rats; however, the weight gain that normally results after ovariectomy was partly prevented. Treatment with WBV was not able to prevent bone loss during induced osteoporosis.

In vivo mechanical loading

The skeleton fulfils its mechanical functions through structural organisation and material properties of individual bones. Both cortical and trabecular morphology and mass can be (re)modelled in response to changes in mechanical strains engendered by load-bearing. To address this, animal models that enable the application of specific loads to individual bones have been developed. These are useful in defining how loading modulates (re)modelling and allow examination of the mechanisms that coordinate these events. This chapter describes how to apply mechanical loading to murine bones through points of articulation, which allows changes in endosteal, periosteal as well as trabecular bone to be revealed by double fluorochrome labelling and computed tomography, respectively.

In vivo validation of a computational bone adaptation model using open-loop control and time-lapsed micro-computed tomography

Cyclic mechanical loading augments trabecular bone mass, mainly by increasing trabecular thickness. For this reason, we hypothesized that an in silico thickening algorithm using open-loop control would be sufficient to reliably predict the response of trabecular bone to cyclic mechanical loading. This would also mean that trabecular bone adaptation could be modeled as a system responding to an input signal at the onset of the process in a predefined manner, without feedback from the outputs. Here, time-lapsed in vivo micro-computed tomography scans of mice cyclically loaded at the sixth caudal vertebra were used to validate the in silico model. When comparing in silico and in vivo data sets after a period of four weeks, a maximum prediction error of 2.4% in bone volume fraction and 5.4% in other bone morphometric indices was calculated. Superimposition of sequentially acquired experimental images and simulated structures revealed that in silico simulations deposited thin and homogeneous layers of bone whilst the experiment was characterized by local areas of strong thickening, as well as considerable volumes of bone resorption. From the results, we concluded that the proposed computational algorithm predicted changes in bone volume fraction and global parameters of bone structure very well over a period of four weeks while it was unable to reproduce accurate spatial patterns of local bone formation and resorption. This study demonstrates the importance of validation of computational models through the use of experimental in vivo data, including the local comparison of simulated and experimental remodeling sites. It is assumed that the ability to accurately predict changes in bone micro-architecture will facilitate a deeper understanding of the cellular mechanisms underlying bone remodeling and adaptation due to mechanical loading.

Tibial compression is anabolic in the adult mouse skeleton despite reduced responsiveness with aging

The ability of the skeleton to adapt to mechanical stimuli diminishes with age in diaphyseal cortical bone, making bone formation difficult for adults. However, the effect of aging on adaptation in cancellous bone, tissue which is preferentially lost with age, is not well characterized. To develop a model for early post-menopausal women and determine the effect of aging on cancellous bone adaptation in the adult mouse skeleton, in vivo tibial compression was applied to adult (26 week old) osteopenic female mice using loading parameters, peak applied load and peak diaphyseal strain magnitude, that were previously found to be osteogenic in young, growing (10 week old) mice. A Load-Matched group received the same peak applied loads (corresponding to +2100 με at the medial diaphysis of the tibia) and a Strain-Matched group received the same peak diaphyseal strains (+1200 με, requiring half the load) as the young mice. The effects of mechanical loading on bone mass and architecture in adult mice were assessed using micro-computed tomography and in vivo structural stiffness measures. Adaptation occurred only in the Load-Matched group in both the metaphyseal and diaphyseal compartments. Cancellous bone mass increased 54% through trabecular thickening, and cortical area increased 41% through medullary contraction and periosteal expansion. Adult mice were able to respond to an anabolic stimulus and recover bone mass to levels seen in growing mice; however, the adaptive response was reduced relative to that in 10 week old female mice for the same applied load. Using this osteogenic loading protocol, other factors affecting pathological bone loss can be addressed using an adult osteopenic mouse model.

Effect of block-periodized exercise training on bone and coronary heart disease risk factors in early post-menopausal women: a randomized controlled study

The purpose of this 12 month randomized exercise intervention was to determine the effect of a block-periodized multipurpose exercise program on bone mineral density (BMD) and parameters of the metabolic syndrome (MetS) in early post-menopausal women. Eighty-five subjects (52.3 ± 2.4 years) living in the area of Erlangen (Germany) were randomly assigned into an exercise (EG, n=43) or a wellness-control group (CG: n=42). The EG performed a periodized multipurpose exercise program with 4-6-week blocks of high-intensity bone-specific exercise intermitted by 10-12 weeks of exercise dedicated to increase endurance and reduce cardiac and metabolic risk factors. The CG performed a low-volume/low-intensity "wellness" program to increase well-being. After 12 months, significant exercise effects were observed for the lumbar spine (LS) BMD as assessed by quantitative computed tomography [total BMD (EG: -0.3 ± 2.1% vs CG: -2.1 ± 2.2%, P=0.015); trabecular BMD (EG: -0.7 ± 3.4% vs CG: -4.7 ± 4.9%, P=0.001) and dual-energy x-ray absorptiometry (DXA) (EG: -0.1 ± 2.2% vs CG: -2.0 ± 2.0%, P=0.002)]. However, no significant effects were observed for total hip BMD as assessed by DXA (P=0.152). Although all MetS parameters were favorably affected among the EG, only the effect for waist circumference was significant. In summary, short periods of bone-specific intervention embedded in longer periods of exercises dedicated to improve cardiovascular and metabolic risk factors positively affected BMD at the LS.

The fatigue resistance of rabbit tibiae varies with age from youth to middle age

Young adults are at risk of stress fractures. Risk is higher in younger and female individuals. Stress fractures occur due to repeated loading of the bone (fatigue). We modeled this with rabbit tibiae. Age increased fatigue resistance which correlated with bone mineral density. A sex difference was not detected.

INTRODUCTION

Younger adults who engage in intense physical activity with a sudden increase in intensity level (military recruits/college athletes) are at risk of bone stress fractures. Risk is greater in females and diminishes with aging. Stress fractures may be the result of fatigue damage, which is not repaired rapidly enough to avoid fracture. It was hypothesized that the fatigue resistance of whole rabbit tibiae would be less in female specimens but greater as animal age increased.

METHODS

Rabbit tibiae were harvested from three age groups (4, 7, and ≥ 12 months (females only)). The tibiae were scanned with dual energy X-ray absorptiometry to determine bone mineral density (BMD), computed tomography to quantify geometry, and then fatigue tested in three-point bending.

RESULTS

In the ≥ 12-month group, BMD was approximately 20% higher, while the fatigue resistance was found to be approximately ten times higher than the other age groups. Sex was not a factor in the 4- and 7-month groups. Multiple linear regression revealed that fatigue life was negatively correlated with applied stress range and positively correlated with BMD (adjusted r (2) = 0.69).

CONCLUSIONS

A difference in fatigue behavior due to sex was not detected, but there was a large increase in fatigue resistance with age. This correlated with increased BMD and parallels a reduced risk of stress fracture due to age in military recruits. Skeletal "maturation" may play an important role in determining stress fracture risk. Increased risk in females may be due to mechanisms other than those that determine material behavior.

Loading and skeletal development and maintenance

Mechanical loading is a major regulator of bone mass and geometry. The osteocytes network is considered the main sensor of loads, through the shear stress generated by strain induced fluid flow in the lacuno-canalicular system. Intracellular transduction implies several kinases and phosphorylation of the estrogen receptor. Several extra-cellular mediators, among which NO and prostaglandins are transducing the signal to the effector cells. Disuse results in osteocytes apoptosis and rapid imbalanced bone resorption, leading to severe osteoporosis. Exercising during growth increases peak bone mass, and could be beneficial with regards to osteoporosis later in life, but the gain could be lost if training is abandoned. Exercise programs in adults and seniors have barely significant effects on bone mass and geometry at least at short term. There are few data on a possible additive effect of exercise and drugs in osteoporosis treatment, but disuse could decrease drugs action. Exercise programs proposed for bone health are tedious and compliance is usually low. The most practical advice for patients is to walk a minimum of 30 to 60 minutes per day. Other exercises like swimming or cycling have less effect on bone, but could reduce fracture risk indirectly by maintaining muscle mass and force.

Leptin receptor (Lepr) is a negative modulator of bone mechanosensitivity and genetic variations in Lepr may contribute to the differential osteogenic response to mechanical stimulation in the C57BL/6J and C3H/HeJ pair of mouse strains

This study investigated the role of leptin receptor (Lepr) signaling in determining the bone mechanosensitivity and also evaluated whether differences in the Lepr signaling may contribute to the differential osteogenic response of the C57BL/6J (B6) and C3H/HeJ (C3H) pair of mouse strains to mechanical stimuli. This study shows that a loading strain of ∼2,500 με, which was insufficient to produce a bone formation response in B6 mice, significantly increased bone formation parameters in leptin-deficient ob(-)/ob(-) mice and that a loading strain of ∼3,000 με also yielded greater osteogenic responses in Lepr-deficient db(-)/db(-) mice than in wild-type littermates. In vitro, a 30-min steady shear stress increased [(3)H]thymidine incorporation and Erk1/2 phosphorylation in ob(-)/ob(-) osteoblasts and db(-)/db(-) osteoblasts much greater than those in corresponding wild-type osteoblasts. The siRNA-mediated suppression of Lepr expression in B6 osteoblasts enhanced (but in osteoblasts of C3H (the mouse strain with poor bone mechanosensitivity) restored) their anabolic responses to shear stress. The Lepr signaling (leptin-induced Jak2/Stat3 phosphorylation) in C3H osteoblasts was higher than that in B6 osteoblasts. One of the three single nucleotide polymorphisms in the C3H Lepr coding region yielded an I359V substitution near the leptin binding region, suggesting that genetic variation of Lepr may contribute to a dysfunctional Lepr signaling in C3H osteoblasts. In conclusion, Lepr signaling is a negative modulator of bone mechanosensitivity. Genetic variations in Lepr, which result in a dysfunctional Lepr signaling in C3H mice, may contribute to the poor osteogenic response to loading in C3H mice.

Systemic effects of ulna loading in male rats during functional adaptation

Functional skeletal adaptation is thought to be a local phenomenon controlled by osteoctyes. However, the nervous system also may have regulatory effects on adaptation. The aim of this study was to determine the effects of loading of a single bone on adaptation of other appendicular long bones and whether these responses were neuronally regulated. Young male Sprague-Dawley rats were used. The right ulna was loaded to induce a modeling response. In other rats, a second regimen was used to induce bone fatigue with a mixed modeling/remodeling response; a proportion of rats from each group received brachial plexus anesthesia to induce temporary neuronal blocking during bone loading. Sham groups were included. Left and right long bones (ulna, humerus, tibia, and femur) from each rat were examined histologically 10 days after loading. In fatigue- and sham-loaded animals, blood plasma concentrations of TNF-α, RANKL, OPG, and TRAP5b were determined. We found that loading the right ulna induced an increase in bone formation in distant long bones that were not loaded and that this effect was neuronally regulated. Distant effects were most evident in the rats that received loading without bone fatigue. In the fatigue-loaded animals, neuronal blocking induced a significant decrease in plasma TRAP5b at 10 days. Histologically, bone resorption was increased in both loaded and contralateral ulnas in fatigue-loaded rats and was not significantly blocked by brachial plexus anesthesia. In young, growing male rats we conclude that ulna loading induced increased bone formation in multiple bones. Systemic adaptation effects were, at least in part, neuronally regulated.

Stepwise increasing and decreasing fluid shear stresses differentially regulate the functions of osteoblasts

It is well accepted that osteoblasts respond to fluid shear stress (FSS) depending on the loading magnitude, rate, and temporal profiles. Although in vivo observations demonstrated that bone mineral density changes as the training intensity gradually increases/decreases, whether osteoblasts perceive such slow temporal changes in the strength of stimulation remains unclear. In this study, we hypothesized that osteoblasts can detect and respond differentially to the temporal gradients of FSS. In specific, we hypothesized that when the temporal FSS gradient is high enough, i) the increasing FSS inhibits the osteoblastic potential in supporting osteoclastogenesis and enhances the osteoblastic anabolic responses; ii) on the other hand, the deceasing FSS would have opposite effects on osteoclastogenesis and anabolic responses. To test the hypotheses, stepwise varying FSS was applied on primary osteoblasts and osteogenic and resorption markers were analyzed. The cells were subjected to FSS increasing from 5, 10, to 15 or decreasing from 15, 10, to 5 dyn/cm(2) at a step of 5 dyn/cm(2) for either 6 or 12 hours. In a subset experiment, the cells were stimulated with stepwise increasing or decreasing FSS at a higher step (10 dyn/cm(2)) for 12 hours. Our results showed that, with the step of 5 dyn/cm(2), the stepwise increasing FSS inhibited the osteoclastogenesis with a 3- to 4-fold decrease in RANKL/OPG gene expression versus static controls, while the stepwise decreasing FSS increased RANKL/OPG ratio by 2- to 2.5-fold versus static controls. Both increasing and decreasing FSS enhanced alkaline phosphatase expression and calcium deposition by 1.0- to 1.8 fold versus static controls. For a higher FSS temporal gradient (three steps of 10 dyn/cm(2) over 12 hour stimulation), the increasing FSS enhanced the expression of alkaline phosphatase expression and calcium deposition by 1.3 fold, while the decreasing FSS slightly inhibited them by -10% compared with static controls. Taken together, our results suggested that osteoblasts can detect the slow temporal gradients of FSS and respond differentially in a dose-dependent manner, which may account for the observed bone mineral density changes in response to the gradual increasing/decreasing exercise in vivo. The stepwise FSS can be a useful model to study bone cell responses to long-term mechanical usage or disuse. These studies will complement the short-term studies and provide additional clinically relevant insights on bone adaptation.

Mechanical stimulation and intermittent parathyroid hormone treatment induce disproportional osteogenic, geometric, and biomechanical effects in growing mouse bone

Mechanical loading and intermittent parathyroid (iPTH) treatment are both osteoanabolic stimuli and are regulated by partially overlapping cellular signaling pathways. iPTH has been shown clinically to be effective in increasing bone mass and reducing fracture risk. Likewise, mechanical stimulation can significantly enhance bone apposition and prevent bone loss, but its clinical effects on fracture susceptibility are less certain. Many of the osteogenic effects of iPTH are localized to biomechanically suboptimal bone surfaces, whereas mechanical loading directs new bone formation to high-stress areas and not to strain-neutral areas. These differences in localization in new tissue, resulting from load-induced versus iPTH-induced bone accumulation, should affect the relation between bone mass and bone strength, or "tissue economy." We investigated the changes in bone mass and strength induced by 6 weeks of mechanical loading and compared them to changes induced by 6 weeks of iPTH treatment. Loading and iPTH both increased ulnar bone accrual, as measured by bone mineral density and content, and fluorochrome-derived bone formation. iPTH induced a significantly greater increase in bone mass than loading, but ulnar bone strength was increased approximately the same amount by both treatments. Mechanical loading during growth can spatially optimize new bone formation to improve structural integrity with a minimal increase in mass, thereby increasing tissue economy, i.e., the amount of strength returned per unit bone mass added. Furthermore, exercise studies in which only small changes in bone mass are detected might be more beneficial to bone health and fracture resistance than has commonly been presumed.