Orientation of cyanine fluorophores terminally attached to DNA via long, flexible tethers

Pursuing excitonic energy transfer with programmable DNA-based optical breadboards

DNA nanotechnology has now enabled the self-assembly of almost any prescribed 3-dimensional nanoscale structure in large numbers and with high fidelity. These structures are also amenable to site-specific modification with a variety of small molecules ranging from drugs to reporter dyes. Beyond obvious application in biotechnology, such DNA structures are being pursued as programmable nanoscale optical breadboards where multiple different/identical fluorophores can be positioned with sub-nanometer resolution in a manner designed to allow them to engage in multistep excitonic energy-transfer (ET) via Förster resonance energy transfer (FRET) or other related processes. Not only is the ability to create such complex optical structures unique, more importantly, the ability to rapidly redesign and prototype almost all structural and optical analogues in a massively parallel format allows for deep insight into the underlying photophysical processes. Dynamic DNA structures further provide the unparalleled capability to reconfigure a DNA scaffold on the fly in situ and thus switch between ET pathways within a given assembly, actively change its properties, and even repeatedly toggle between two states such as on/off. Here, we review progress in developing these composite materials for potential applications that include artificial light harvesting, smart sensors, nanoactuators, optical barcoding, bioprobes, cryptography, computing, charge conversion, and theranostics to even new forms of optical data storage. Along with an introduction into the DNA scaffolding itself, the diverse fluorophores utilized in these structures, their incorporation chemistry, and the photophysical processes they are designed to exploit, we highlight the evolution of DNA architectures implemented in the pursuit of increased transfer efficiency and the key lessons about ET learned from each iteration. We also focus on recent and growing efforts to exploit DNA as a scaffold for assembling molecular dye aggregates that host delocalized excitons as a test bed for creating excitonic circuits and accessing other quantum-like optical phenomena. We conclude with an outlook on what is still required to transition these materials from a research pursuit to application specific prototypes and beyond.

FRET-based dynamic structural biology: Challenges, perspectives and an appeal for open-science practices

Single-molecule FRET (smFRET) has become a mainstream technique for studying biomolecular structural dynamics. The rapid and wide adoption of smFRET experiments by an ever-increasing number of groups has generated significant progress in sample preparation, measurement procedures, data analysis, algorithms and documentation. Several labs that employ smFRET approaches have joined forces to inform the smFRET community about streamlining how to perform experiments and analyze results for obtaining quantitative information on biomolecular structure and dynamics. The recent efforts include blind tests to assess the accuracy and the precision of smFRET experiments among different labs using various procedures. These multi-lab studies have led to the development of smFRET procedures and documentation, which are important when submitting entries into the archiving system for integrative structure models, PDB-Dev. This position paper describes the current 'state of the art' from different perspectives, points to unresolved methodological issues for quantitative structural studies, provides a set of 'soft recommendations' about which an emerging consensus exists, and lists openly available resources for newcomers and seasoned practitioners. To make further progress, we strongly encourage 'open science' practices.

Determining the In-Plane Orientation and Binding Mode of Single Fluorescent Dyes in DNA Origami Structures

We present a technique to determine the orientation of single fluorophores attached to DNA origami structures based on two measurements. First, the orientation of the absorption transition dipole of the molecule is determined through a polarization-resolved excitation measurement. Second, the orientation of the DNA origami structure is obtained from a DNA-PAINT nanoscopy measurement. Both measurements are performed consecutively on a fluorescence wide-field microscope. We employed this approach to study the orientation of single ATTO 647N, ATTO 643, and Cy5 fluorophores covalently attached to a 2D rectangular DNA origami structure with different nanoenvironments, achieved by changing both the fluorophores' binding position and immediate vicinity. Our results show that when fluorophores are incorporated with additional space, for example, by omitting nucleotides in an elsewise double-stranded environment, they tend to stick to the DNA and to adopt a preferred orientation that depends more on the specific molecular environment than on the fluorophore type. With the aid of all-atom molecular dynamics simulations, we rationalized our observations and provide insight into the fluorophores' probable binding modes. We believe this work constitutes an important step toward manipulating the orientation of single fluorophores in DNA origami structures, which is vital for the development of more efficient and reproducible self-assembled nanophotonic devices.

Bacterial Vivisection: How Fluorescence-Based Imaging Techniques Shed a Light on the Inner Workings of Bacteria

The rise in fluorescence-based imaging techniques over the past 3 decades has improved the ability of researchers to scrutinize live cell biology at increased spatial and temporal resolution. In microbiology, these real-time vivisections structurally changed the view on the bacterial cell away from the "watery bag of enzymes" paradigm toward the perspective that these organisms are as complex as their eukaryotic counterparts. Capitalizing on the enormous potential of (time-lapse) fluorescence microscopy and the ever-extending pallet of corresponding probes, initial breakthroughs were made in unraveling the localization of proteins and monitoring real-time gene expression. However, later it became clear that the potential of this technique extends much further, paving the way for a focus-shift from observing single events within bacterial cells or populations to obtaining a more global picture at the intra- and intercellular level. In this review, we outline the current state of the art in fluorescence-based vivisection of bacteria and provide an overview of important case studies to exemplify how to use or combine different strategies to gain detailed information on the cell's physiology. The manuscript therefore consists of two separate (but interconnected) parts that can be read and consulted individually. The first part focuses on the fluorescent probe pallet and provides a perspective on modern methodologies for microscopy using these tools. The second section of the review takes the reader on a tour through the bacterial cell from cytoplasm to outer shell, describing strategies and methods to highlight architectural features and overall dynamics within cells.

Dependence of Fluorescence Quenching of CY3 Oligonucleotide Conjugates on the Oxidation Potential of the Stacking Base Pair

To understand the complex fluorescence properties of astraphloxin (CY3)-labelled oligonucleotides, it is necessary to take into account the redox properties of the nucleobases. In oligonucleotide hybrids, we observed a dependence of the fluorescence intensity on the oxidation potential of the neighbouring base pair. For the series I < A < G < 8-oxoG, the extent of fluorescence quenching follows the trend of decreasing oxidation potentials. In a series of 7 nt hybrids, stacking interactions of CY3 with perfect match and mismatch base pairs were found to stabilise the hybrid by 7–8 kJ/mol. The fluorescence measurements can be explained by complex formation resulting in fluorescence quenching that prevails over the steric effect of a reduced excited state trans-cis isomerisation, which was expected to increase the fluorescence efficiency of the dye when stacking to a base pair. This can be explained by the fact that, in a double strand, base pairing and stacking cause a dramatic change in the oxidation potential of the nucleobases. In single-molecule fluorescence measurements, the oxidation of G to 8-oxoG was observed as a result of photoinduced electron transfer and subsequent chemical reactions. Our results demonstrate that covalently linked CY3 is a potent oxidant towards dsDNA. Sulfonated derivatives should be used instead.

Single-molecule chemistry. Part I: monitoring oxidation of G in oligonucleotides using CY3 fluorescence

Single-molecule hybridisation of CY3 dye labelled short oligonucleotides to surface immobilised probes was investigated in zero-mode waveguide nanostructures using a modified DNA sequencer. At longer measuring times, we observed changes of the initial hybridisation fluorescence pulse pattern which we attribute to products created by chemical reactions at the nucleobases. The origin is a charge separated state created by a photoinduced electron transfer from nucleobases to the dye followed by secondary reactions with oxygen and water, respectively. The positive charge can migrate through the hybrid resulting in base modifications at distant sites. Static fluorescence spectra were recorded in order to determine the properties of CY3 stacking to different base pairs, and compared to pulse intensities. A characteristic pulse pattern change was assigned to the oxidation of G to 8-oG besides the formation of a number of secondary products that are not yet identified. Further, we present a method to visualise the degree of chemical reactions to gain an overview of ongoing processes. Our study demonstrates that CY3 is able to oxidise nucleobases in ds DNA, and also in ss overhangs. An important finding is the correlation between nucleobase oxidation potential and fluorescence quenching which explains the intensity changes observed in single molecule measurements. The analysis of fluorescence traces provides the opportunity to track complete and coherent reaction sequences enabling to follow the fate of a single molecule over a long period of time, and to observe chemical reactions in real-time. This opens up the opportunity to analyse reaction pathways, to detect new products and short-lived intermediates, and to investigate rare events due to the large number of single molecules observed in parallel.

Initial state of DNA-Dye complex sets the stage for protein induced fluorescence modulation

Protein-induced fluorescence enhancement (PIFE) is a popular tool for characterizing protein-DNA interactions. PIFE has been explained by an increase in local viscosity due to the presence of the protein residues. This explanation, however, denies the opposite effect of fluorescence quenching. This work offers a perspective for understanding PIFE mechanism and reports the observation of a phenomenon that we name protein-induced fluorescence quenching (PIFQ), which exhibits an opposite effect to PIFE. A detailed characterization of these two fluorescence modulations reveals that the initial fluorescence state of the labeled mediator (DNA) determines whether this mediator-conjugated dye undergoes PIFE or PIFQ upon protein binding. This key role of the mediator DNA provides a protocol for the experimental design to obtain either PIFQ or PIFE, on-demand. This makes the arbitrary nature of the current experimental design obsolete, allowing for proper integration of both PIFE and PIFQ with existing bulk and single-molecule fluorescence techniques.

Protein-induced fluorescence enhancement (PIFE) is a popular tool for characterizing protein-DNA interactions. Here, authors provide a perspective on understanding the general phenomenon of induced fluorescence modulation

Plasmon-Enhanced Fluorescence Resonance Energy Transfer

In this review, we firstly introduce physical mechanism of fluorescence resonance energy transfer (FRET), the methods to measure FRET efficiency, and the applications of FRET. Secondly, we introduce the principle and applications of plasmon-enhanced fluorescence (PEF). Thirdly, we focused on the principle and applications of plasmon-enhanced FRET. This review can promote further understanding of FRET and PE-FRET.

Development of a genetically encodable FRET system using fluorescent RNA aptamers

Fluorescent RNA aptamers are useful as markers for tracking RNA molecules inside cells and for creating biosensor devices. Förster resonance energy transfer (FRET) based on fluorescent proteins has been used to detect conformational changes, however, such FRET devices have not yet been produced using fluorescent RNA aptamers. Here we develop an RNA aptamer-based FRET (apta-FRET) system using single-stranded RNA origami scaffolds. To obtain FRET, the fluorescent aptamers Spinach and Mango are placed in close proximity on the RNA scaffolds and a new fluorophore is synthesized to increase spectral overlap. RNA devices that respond to conformational changes are developed, and finally, apta-FRET constructs are expressed in E. coli where FRET is observed, demonstrating that the apta-FRET system is genetically encodable and that the RNA nanostructures fold correctly in bacteria. We anticipate that the RNA apta-FRET system could have applications as ratiometric sensors for real-time studies in cell and synthetic biology.

FRET has been used to study protein conformational changes but has never been applied to RNA aptamers. Here the authors develop a genetically encodable RNA aptamer-based FRET system on single-stranded RNA origami scaffolds, and demonstrate it can be used to study RNA conformational changes.

Crystal Structures of Cyanine Fluorophores Stacked onto the End of Double-Stranded RNA

The indodicarbocyanine fluorophores Cy3 and Cy5 are extensively used as donor-acceptor pairs in fluorescence resonance energy transfer experiments, especially those involving single molecules. When terminally attached to double-stranded nucleic acids via the 5' phosphate group these fluorophores stack onto the ends of the molecule. Knowledge of the positions of the fluorophores is critical to the interpretation of fluorescence resonance energy transfer data. The positions have been demonstrated for double-stranded (ds) DNA using NMR spectroscopy. Here, we have used x-ray crystallography to analyze the location of Cy3 and Cy5 on dsRNA, using complexes of an RNA stem-loop bound to L5 protein determined at 2.4 Å resolution. This confirms the tendency of both fluorophores to stack on the free end of RNA, with the long axis of the fluorophores approximately parallel to that of the terminal basepair. However, the manner of interaction of both Cy3 and Cy5 with the terminus of the dsRNA is significantly different from that deduced for dsDNA using NMR. The fluorophores are stacked on the terminal basepair such that their indole nitrogen atoms lie on the major groove side, and thus their pendant methyl groups are on the minor groove side.

Nitrogen doped carbon dots derived from Sargassum fluitans as fluorophore for DNA detection

This work focused on the use of waste seaweed Sargassum fluitans (S. fluitans) as carbon source precursor to prepare nitrogen doped carbon dots (NCDs) by hydrothermal method. High resolution transmission electron microscopic (HR-TEM) studies revealed that the synthesized water soluble NCDs are in the size range of 2-8nm and exhibits excellent fluorescent properties with a quantum yield of 18.2%. Elemental nitrogen in NCDs was evidenced by X-ray photoelectron spectroscopy (XPS) and Fourier transformed infrared spectrum (FT-IR). The phytochemical analysis of S. fluitans using 1H NMR and 13C NMR revealed the presence of few amino acids which act as nitrogen source in the preparation of NCDs. Application of NCDs as fluorophore for double stranded DNA, single stranded DNA and RNA detection was highlighted in this study. Excellent fluorescent tagging abilities of NCDs with the biological nucleic acids were evidenced using gel electrophoresis. Significant increase in fluorescence was observed upon tagging of NCDs with nucleic acids and this particular phenomenon helps better in visualizing the nucleic acids. All three nucleic acids i.e. double stranded DNA, single stranded DNA and RNA showed similar phenomenon upon tagging with NCDs. Thus synthesized NCDs may be used as an alternate fluorophore for commercial toxic organic staining agents to visualize nucleic acids.

Plasmonic Nanoantennas Enable Forbidden Förster Dipole-Dipole Energy Transfer and Enhance the FRET Efficiency

Förster resonance energy transfer (FRET) plays a key role in biochemistry, organic photovoltaics, and lighting sources. FRET is commonly used as a nanoruler for the short (nanometer) distance between donor and acceptor dyes, yet FRET is equally sensitive to the mutual dipole orientation. The orientation dependence complicates the FRET analysis in biological samples and may even lead to the absence of FRET for perpendicularly oriented donor and acceptor dipoles. Here, we exploit the strongly inhomogeneous and localized fields in plasmonic nanoantennas to open new energy transfer routes, overcoming the limitations from the mutual dipole orientation to ultimately enhance the FRET efficiency. We demonstrate that the simultaneous presence of perpendicular near-field components in the nanoantenna sets favorable energy transfer routes that increase the FRET efficiency up to 50% for nearly perpendicular donor and acceptor dipoles. This new facet of plasmonic nanoantennas enables dipole-dipole energy transfer that would otherwise be forbidden in a homogeneous environment. As such, our approach further increases the applicability of single-molecule FRET over diffraction-limited approaches, with the additional benefits of higher sensitivities and higher concentration ranges toward physiological levels.

Lights, camera, action! Capturing the spliceosome and pre-mRNA splicing with single-molecule fluorescence microscopy

The process of removing intronic sequences from a precursor to messenger RNA (pre-mRNA) to yield a mature mRNA transcript via splicing is an integral step in eukaryotic gene expression. Splicing is carried out by a cellular nanomachine called the spliceosome that is composed of RNA components and dozens of proteins. Despite decades of study, many fundamentals of spliceosome function have remained elusive. Recent developments in single-molecule fluorescence microscopy have afforded new tools to better probe the spliceosome and the complex, dynamic process of splicing by direct observation of single molecules. These cutting-edge technologies enable investigators to monitor the dynamics of specific splicing components, whole spliceosomes, and even cotranscriptional splicing within living cells. WIREs RNA 2016, 7:683-701. doi: 10.1002/wrna.1358 For further resources related to this article, please visit the WIREs website.

Revealing Nucleic Acid Mutations Using Förster Resonance Energy Transfer-Based Probes

Nucleic acid mutations are of tremendous importance in modern clinical work, biotechnology and in fundamental studies of nucleic acids. Therefore, rapid, cost-effective and reliable detection of mutations is an object of extensive research. Today, Förster resonance energy transfer (FRET) probes are among the most often used tools for the detection of nucleic acids and in particular, for the detection of mutations. However, multiple parameters must be taken into account in order to create efficient FRET probes that are sensitive to nucleic acid mutations. In this review; we focus on the design principles for such probes and available computational methods that allow for their rational design. Applications of advanced, rationally designed FRET probes range from new insights into cellular heterogeneity to gaining new knowledge of nucleic acid structures directly in living cells.

Competitive Assays of Label-Free DNA Hybridization with Single-Molecule Fluorescence Imaging Detection

Single-molecule imaging of fluorescently labeled biomolecules is a powerful technique for measuring association interactions; however, care must be taken to ensure that the fluorescent labels do not influence the system being probed. Label-free techniques are needed to understand biomolecule interactions free from the influence of an attached label, but these techniques often lack sensitivity and specificity. To solve these challenges, we have developed a competitive assay that uses single-molecule detection to track the population of unlabeled target single-stranded DNA (ssDNA) hybridized with probe DNA immobilized at a glass interface by detecting individual duplexes with a fluorescently labeled "tracer" ssDNA. By labeling a small fraction (<0.2%) of target molecules, the "tracer" DNA tracks the available probe DNA sites without significant competition with the unlabeled target population. Single-molecule fluorescence imaging is a good read-out scheme for competitive assays, as it is sufficiently sensitive to detect tracer DNA on substrates with relatively low densities of probe DNA, ∼10(-3) of a monolayer, so that steric interactions do not hinder DNA hybridization. Competitive assays are used to measure the association constant of complementary strand DNA hybridization of 9- and 10-base pair targets, where the tracer assay predicts the same association constant as a traditional displacement competitive assay. This methodology was used to compare the Ka of hybridization for identical DNA strands differing only by the presence of a fluorescent label tethered to the 5' end of the solution-phase target. The addition of the fluorescent label significantly stabilizes the DNA duplex by 3.6 kJmol(-1), adding more stability than an additional adenine-thymine base-pairing interaction, 2.7 kJmol(-1). This competitive tracer assay could be used to screen a number of labeled and unlabeled target DNA strands to measure the impact of fluorescent labeling on duplex stability. This single-molecule competitive hybridization scheme could be easily adapted into a sensitive assay, where competition between tracer and target oligonucleotides for probe sites could be used to measure concentrations of unlabeled DNA or RNA.

Bright Fluorescent Nanotags from Bottlebrush Polymers with DNA-Tipped Bristles

Bright signal outputs are needed for fluorescence detection of biomolecules at their native expression levels. Increasing the number of labels on a probe often results in crowding-induced self-quenching of chromophores, and maintaining the function of the targeting moiety (e.g., an antibody) is a concern. Here we demonstrate a simple method to accommodate thousands of fluorescent dye molecules on a single antibody probe while avoiding the negative effects of self-quenching. We use a bottlebrush polymer from which extend hundreds of duplex DNA strands that can accommodate hundreds of covalently attached and/or thousands of noncovalently intercalated fluorescent dyes. This polymer-DNA assembly sequesters the intercalated fluorophores against dissociation and can be tethered through DNA hybridization to an IgG antibody. The resulting fluorescent nanotag can detect protein targets in flow cytometry, confocal fluorescence microscopy, and dot blots with an exceptionally bright signal that compares favorably to commercially available antibodies labeled with organic dyes or quantum dots.

Contribution of fluorophore dynamics and solvation to resonant energy transfer in protein-DNA complexes: a molecular-dynamics study

In Förster resonance energy transfer (FRET) experiments, extracting accurate structural information about macromolecules depends on knowing the positions and orientations of donor and acceptor fluorophores. Several approaches have been employed to reduce uncertainties in quantitative FRET distance measurements. Fluorophore-position distributions can be estimated by surface accessibility (SA) calculations, which compute the region of space explored by the fluorophore within a static macromolecular structure. However, SA models generally do not take fluorophore shape, dye transition-moment orientation, or dye-specific chemical interactions into account. We present a detailed molecular-dynamics (MD) treatment of fluorophore dynamics for an ATTO donor/acceptor dye pair and specifically consider as case studies dye-labeled protein-DNA intermediates in Cre site-specific recombination. We carried out MD simulations in both an aqueous solution and glycerol/water mixtures to assess the effects of experimental solvent systems on dye dynamics. Our results unequivocally show that MD simulations capture solvent effects and dye-dye interactions that can dramatically affect energy transfer efficiency. We also show that results from SA models and MD simulations strongly diverge in cases where donor and acceptor fluorophores are in close proximity. Although atomistic simulations are computationally more expensive than SA models, explicit MD studies are likely to give more realistic results in both homogeneous and mixed solvents. Our study underscores the model-dependent nature of FRET analyses, but also provides a starting point to develop more realistic in silico approaches for obtaining experimental ensemble and single-molecule FRET data.

Dynamics of fluorescent dyes attached to G-quadruplex DNA and their effect on FRET experiments

FRET spectroscopy is a promising approach for investigating the dynamics of G-quadruplex DNA folds and improving the targeting of G-quadruplexes by potential anticancer compounds. To better interpret such experiments, classical and replica-exchange molecular dynamics simulations and fluorescence-lifetime measurements are used to understand the behavior of a range of Cy3-based dyes attached to the 3' end of G-quadruplex DNA. The simulations revealed that the dyes interact extensively with the G-quadruplex. Identification of preferred dye positions relative to the G-quadruplex in the simulations allows the impact of dye-DNA interactions on FRET results to be determined. All the dyes show significant deviations from the common approximation of being freely rotating and not interacting with the host, but one of the Cy3 dye analogues is slightly closer to this case.

Cy3 and Cy5 dyes attached to oligonucleotide terminus stabilize DNA duplexes: predictive thermodynamic model

Cyanine dyes are important chemical modifications of oligonucleotides exhibiting intensive and stable fluorescence at visible light wavelengths. When Cy3 or Cy5 dye is attached to 5' end of a DNA duplex, the dye stacks on the terminal base pair and stabilizes the duplex. Using optical melting experiments, we have determined thermodynamic parameters that can predict the effects of the dyes on duplex stability quantitatively (ΔG°, Tm). Both Cy dyes enhance duplex formation by 1.2 kcal/mol on average, however, this Gibbs energy contribution is sequence-dependent. If the Cy5 is attached to a pyrimidine nucleotide of pyrimidine-purine base pair, the stabilization is larger compared to the attachment to a purine nucleotide. This is likely due to increased stacking interactions of the dye to the purine of the complementary strand. Dangling (unpaired) nucleotides at duplex terminus are also known to enhance duplex stability. Stabilization originated from the Cy dyes is significantly larger than the stabilization due to the presence of dangling nucleotides. If both the dangling base and Cy3 are present, their thermodynamic contributions are approximately additive. New thermodynamic parameters improve predictions of duplex folding, which will help design oligonucleotide sequences for biophysical, biological, engineering, and nanotechnology applications.

Temperature-cycle microscopy reveals single-molecule conformational heterogeneity

Single-molecule temperature-cycle FRET microscopy of polyproline and dsDNA reveals conformational heterogeneity induced dye–dye interaction and its influence on observed FRET.

The architecture of the 12RSS in V(D)J recombination signal and synaptic complexes

V(D)J recombination is initiated by RAG1 and RAG2, which together with HMGB1 bind to a recombination signal sequence (12RSS or 23RSS) to form the signal complex (SC) and then capture a complementary partner RSS, yielding the paired complex (PC). Little is known regarding the structural changes that accompany the SC to PC transition or the structural features that allow RAG to distinguish its two asymmetric substrates. To address these issues, we analyzed the structure of the 12RSS in the SC and PC using fluorescence resonance energy transfer (FRET) and molecular dynamics modeling. The resulting models indicate that the 12RSS adopts a strongly bent V-shaped structure upon RAG/HMGB1 binding and reveal structural differences, particularly near the heptamer, between the 12RSS in the SC and PC. Comparison of models of the 12RSS and 23RSS in the PC reveals broadly similar shapes but a distinct number and location of DNA bends as well as a smaller central cavity for the 12RSS. These findings provide the most detailed view yet of the 12RSS in RAG–DNA complexes and highlight structural features of the RSS that might underlie activation of RAG-mediated cleavage and substrate asymmetry important for the 12/23 rule of V(D)J recombination.

Cy3 and Cy5 dyes terminally attached to 5'C end of DNA: structure, dynamics, and energetics

Cy3 and Cy5 cyanine dyes terminally attached to the 5'C end (C1) of the DNA oligonucleotide were studied by metadynamics (MTD), molecular dynamics (MD), and density-functional methods with dispersion corrections (DFT-D). MTD simulations explored the free energy surface (FES) of the dye-DNA interactions, which included stacking and major groove binding motifs and unstacked structures. Dynamics of the stacked structures was studied by the MD simulations. All possible combinations of stacking interactions between the two indole rings of the dyes and the neighbor guanine and cytosine rings were observed. The most probable interaction included the stacking between the dye's distal indole ring and the guanine base. In ∼10% of the structures the delocalized π-electrons of the dyes' polymethine linkers played a key role in the dye-DNA dispersion interactions. The stacked conformers of the Cy3 dye were confirmed as true minima by DFT-D full optimizations. The stacked dye decreased flexibility up to two neighbor base pairs.

Measurement of the change in twist at a helical junction in RNA using the orientation dependence of FRET

Indocarbocyanine fluorophores attached via the 5' terminus of double-stranded nucleic acids have a strong propensity to stack onto the terminal basepair. We previously demonstrated that the efficiency of fluorescence resonance energy transfer between cyanine 3 and 5 terminally attached to duplex species exhibits a pronounced modulation with helix length. This results from a systematic variation in the orientation parameter κ(2) as the relative rotation of the fluorophore transition moments changes due to the helical geometry. Analysis of such profiles provides a rich source of orientational information. In this work, we applied this methodology to the structure of a three-way helical junction that plays an important role in the hepatitis C virus internal ribosome entry site. By comparing matched pairs of duplex and junction species, we were able to measure the change in rotation at the junction. The data reveal a 29.5° overwinding and a small axial extension. This shows the power of this approach for measuring orientational information in biologically important RNA junctions.

Structure-based model for light-harvesting properties of nucleic acid nanostructures

Programmed self-assembly of DNA enables the rational design of megadalton-scale macromolecular assemblies with sub-nanometer scale precision. These assemblies can be programmed to serve as structural scaffolds for secondary chromophore molecules with light-harvesting properties. Like in natural systems, the local and global spatial organization of these synthetic scaffolded chromophore systems plays a crucial role in their emergent excitonic and optical properties. Previously, we introduced a computational model to predict the large-scale 3D solution structure and flexibility of nucleic acid nanostructures programmed using the principle of scaffolded DNA origami. Here, we use Förster resonance energy transfer theory to simulate the temporal dynamics of dye excitation and energy transfer accounting both for overall DNA nanostructure architecture as well as atomic-level DNA and dye chemical structure and composition. Results are used to calculate emergent optical properties including effective absorption cross-section, absorption and emission spectra and total power transferred to a biomimetic reaction center in an existing seven-helix double stranded DNA-based antenna. This structure-based computational framework enables the efficient in silico evaluation of nucleic acid nanostructures for diverse light-harvesting and photonic applications.

Riboswitch structure and dynamics by smFRET microscopy

Riboswitches are structured noncoding RNA elements that control the expression of their embedding messenger RNAs by sensing the intracellular concentration of diverse metabolites. As the name suggests, riboswitches are dynamic in nature so that studying their inherent conformational dynamics and ligand-mediated folding is important for understanding their mechanism of action. Single-molecule fluorescence energy transfer (smFRET) microscopy is a powerful and versatile technique for studying the folding pathways and intra- and intermolecular dynamics of biological macromolecules, especially RNA. The ability of smFRET to monitor intramolecular distances and their temporal evolution make it a particularly insightful tool for probing the structure and dynamics of riboswitches. Here, we detail the general steps for using prism-based total internal reflection fluorescence microscopy for smFRET studies of the structure, dynamics, and ligand-binding mechanisms of riboswitches.

The three-dimensional context of a double helix determines the fluorescence of the internucleoside-tethered pair of fluorophores

We report a general phenomenon of the formation of either a fluorescent or an entirely quenched oligodeoxynucleotide (ODN) duplex system by hybridizing pairs of complementary ODNs with identical chemical composition. The ODNs carried internucleoside tether-linked cyanines, where the cyanines were chosen to form a Förster's resonance energy transfer (FRET) donor-acceptor pair. The fluorescent and quenched ODN duplex systems differed only in that the cyanines linked to the respective ODNs were linked either closer to the 5'- or 3'-ends of the molecule. In either case, however, the dyes were separated by an identical number (7 or 8) of base pairs. Characterization by molecular modeling and energy minimization using a conformational search algorithm in a molecular operating environment (MOE) revealed that linking of the dyes closer to the 5'-ends resulted in their reciprocal orientation across the major groove which allowed a closely interacting dye pair to be formed. This overlap between the donor and acceptor dye molecules resulted in changes in absorbance spectra consistent with the formation of H-aggregates. Conversely, dyes linked closer to 3'-ends exhibited emissive FRET and formed a pair of dyes that interacted with the DNA helix only weakly. Induced CD spectra analysis suggested that interaction with the double helix was weaker than in the case of the closely interacting cyanine dye pair. Linking the dyes such that the base pair separation was 10 or 0 favored energy transfer with subsequent acceptor emission. Our results suggest that when interpreting FRET measurements from nucleic acids, the use of a "spectroscopic ruler" principle which takes into account the 3D helical context of the double helix will allow more accurate interpretation of fluorescence emission.

Indocyanine dyes approach free rotation at the 3' terminus of A-RNA: a comparison with the 5' terminus and consequences for fluorescence resonance energy transfer

Cyanine dyes are widely used to study the folding and structural transformations of nucleic acids using fluorescence resonance energy transfer (FRET). The extent to which FRET can be used to extract inter- and intramolecular distances has been the subject of considerable debate in the literature; the contribution of dye and linker dynamics to the observed FRET signal is particularly troublesome. We used molecular dynamics (MD) simulations to study the dynamics of the indocarbocyanine dyes Cy3 and Cy5 attached variously to the 3' or 5' terminal bases of a 16-base-pair RNA duplex. We then used Monte Carlo modeling of dye photophysics to predict the results of single-molecule-sensitive FRET measurements of these same molecules. Our results show that the average value of FRET depends on both the terminal base and the linker position. In particular, 3' attached dyes typically explore a wide region of configuration space, and the relative orientation factor, κ(2), has a distribution that approaches that of free-rotators. This is in contrast to 5' attached dyes, which spend a significant fraction of their time in one or more configurations that are effectively stacked on the ends of the RNA duplex. The presence of distinct dye configurations for 5' attached dyes is consistent with observations, made by others, of multiple fluorescence lifetimes of Cy3 on nucleic acids. Although FRET is frequently used as a molecular "ruler" to measure intramolecular distances, the unambiguous measurement of distances typically relies on the assumption that the rotational degrees of freedom of the dyes can be averaged out and that the donor lifetime in the absence of the acceptor is a constant. We demonstrate that even for the relatively free 3' attached dyes, the correlation time of κ(2) is still too long to justify the use of a free-rotation approximation. We further explore the consequences of multiple donor lifetimes on the predicted value of FRET.

Structure-function relationship of substituted bromomethylcoumarins in nucleoside specificity of RNA alkylation

Selective alkylation of RNA nucleotides is an important field of RNA biochemistry, e.g. in applications of fluorescent labeling or in structural probing experiments, yet detailed structure-function studies of labeling agents are rare. Here, bromomethylcoumarins as reactive compounds for fluorescent labeling of RNA are developed as an attractive scaffold on which electronic properties can be modulated by varying the substituents. Six different 4-bromomethyl-coumarins of various substitution patterns were tested for nucleotide specificity of RNA alkylation using tRNA from Escherichia coli as substrate. Using semi-quantitative LC-MS/MS analysis, reactions at mildly acidic and slightly alkaline pH were compared. For all tested compounds, coumarin conjugates with 4-thiouridine, pseudouridine, guanosine, and uridine were identified, with the latter largely dominating. This data set shows that selectivity of ribonucleotide alkylation depends on the substitution pattern of the reactive dye, and even more strongly on the modulation of the reaction conditions. The latter should be therefore carefully optimized when striving to achieve selectivity. Interestingly, the highest selectivity for labeling of a modified nucleoside, namely of 4-thiouridine, was achieved with a compound whose selectivity was somewhat less dependent on reaction conditions than the other compounds. In summary, bromomethylcoumarin derivatives are a highly interesting class of compounds, since their selectivity for 4-thiouridine can be efficiently tuned by variation of substitution pattern and reaction conditions.

FRETmatrix: a general methodology for the simulation and analysis of FRET in nucleic acids

Förster resonance energy transfer (FRET) is a technique commonly used to unravel the structure and conformational changes of biomolecules being vital for all living organisms. Typically, FRET is performed using dyes attached externally to nucleic acids through a linker that complicates quantitative interpretation of experiments because of dye diffusion and reorientation. Here, we report a versatile, general methodology for the simulation and analysis of FRET in nucleic acids, and demonstrate its particular power for modelling FRET between probes possessing limited diffusional and rotational freedom, such as our recently developed nucleobase analogue FRET pairs (base–base FRET). These probes are positioned inside the DNA/RNA structures as a replacement for one of the natural bases, thus, providing unique control of their position and orientation and the advantage of reporting from inside sites of interest. In demonstration studies, not requiring molecular dynamics modelling, we obtain previously inaccessible insight into the orientation and nanosecond dynamics of the bases inside double-stranded DNA, and we reconstruct high resolution 3D structures of kinked DNA. The reported methodology is accompanied by a freely available software package, FRETmatrix, for the design and analysis of FRET in nucleic acid containing systems.

Advances in quantitative FRET-based methods for studying nucleic acids

Förster resonance energy transfer (FRET) is a powerful tool for monitoring molecular distances and interactions at the nanoscale level. The strong dependence of transfer efficiency on probe separation makes FRET perfectly suited for "on/off" experiments. To use FRET to obtain quantitative distances and three-dimensional structures, however, is more challenging. This review summarises recent studies and technological advances that have improved FRET as a quantitative molecular ruler in nucleic acid systems, both at the ensemble and at the single-molecule levels.

A highly fluorescent DNA toolkit: synthesis and properties of oligonucleotides containing new Cy3, Cy5 and Cy3B monomers

Cy3B is an extremely bright and stable fluorescent dye, which is only available for coupling to nucleic acids post-synthetically. This severely limits its use in the fields of genomics, biology and nanotechnology. We have optimized the synthesis of Cy3B, and for the first time produced a diverse range of Cy3B monomers for use in solid-phase oligonucleotide synthesis. This molecular toolkit includes phosphoramidite monomers with Cy3B linked to deoxyribose, to the 5-position of thymine, and to a hexynyl linker, in addition to an oligonucleotide synthesis resin in which Cy3B is linked to deoxyribose. These monomers have been used to incorporate single and multiple Cy3B units into oligonucleotides internally and at both termini. Cy3B Taqman probes, Scorpions and HyBeacons have been synthesized and used successfully in mutation detection, and a dual Cy3B Molecular Beacon was synthesized and found to be superior to the corresponding Cy3B/DABCYL Beacon. Attachment of Cy3, Cy3B and Cy5 to the 5-position of thymidine by an ethynyl linker enabled the synthesis of an oligonucleotide FRET system. The rigid linker between the dye and nucleobase minimizes dye–dye and dye–DNA interactions and reduces fluorescence quenching. These reagents open up new future applications of Cy3B, including more sensitive single-molecule and cell-imaging studies.

DNA-controlled excitonic switches

Fluorescence resonance energy transfer (FRET) is a promising means of enabling information processing in nanoscale devices, but dynamic control over exciton pathways is required. Here, we demonstrate the operation of two complementary switches consisting of diffusive FRET transmission lines in which exciton flow is controlled by DNA. Repeatable switching is accomplished by the removal or addition of fluorophores through toehold-mediated strand invasion. In principle, these switches can be networked to implement any Boolean function.

The structure of sulfoindocarbocyanine 3 terminally attached to dsDNA via a long, flexible tether

Fluorescence resonance energy transfer (FRET) is an important source of long-range distance information in macromolecules. However, extracting maximum information requires knowledge of fluorophore, donor and acceptor, positions on the macromolecule. We previously determined the structure of the indocarbocyanine fluorophores Cy3 and Cy5 attached to DNA via three-carbon atom tethers, showing that they stacked onto the end of the helix in a manner similar to an additional basepair. Our recent FRET study has suggested that when they are attached via a longer 13-atom tether, these fluorophores are repositioned relative to the terminal basepair by a rotation of ∼30°, while remaining stacked. In this study, we have used NMR to extend our structural understanding to the commonly used fluorophore sulfoindocarbocyanine-3 (sCy3) attached to the 5'-terminus of the double-helical DNA via a 13-atom flexible tether (L13). We find that L13-sCy3 remains predominantly stacked onto the end of the duplex, but adopts a significantly different conformation, from that of either Cy3 or Cy5 attached by 3-atom tethers, with the long axes of the fluorophore and the terminal basepair approximately parallel. This result is in close agreement with our FRET data, supporting the contention that FRET data can be used to provide orientational information.