Microcrystalline cellulose-carboxymethyl cellulose sodium as an effective dispersant for drug nanocrystals: A case study

Progress in the development of stabilization strategies for nanocrystal preparations

In recent years, nanocrystal technology has been extensively investigated. Due to the submicron particle size and unique physicochemical properties of nanocrystals, they overcome the problems of low drug solubility and poor bioavailability. Although the structures of nanocrystals are simple, the further development of these materials is hindered by their stability. Drug nanocrystals with particle sizes of 1∼1000 nm usually require the addition of stabilizers such as polymers or surfactants to enhance their stability. The stability of nanocrystal suspensions and the redispersibility of solid nanocrystal drugs are the key factors for the large-scale production of nanocrystal preparations. In this paper, the factors that affect the stability of drug nanocrystal preparations are discussed, and related methods for solving the stability problem are put forward.

Research in porous structure of cellulose aerogel made from cellulose nanofibrils

In this study, a simple strategy to fabricate the cellulose aerogel with homogeneous porous structure and good compression strength properties has been demonstrated. The cellulose aerogel was simply prepared by adding styrene acrylic emulsion (SAE) to the TEMPO-oxidized cellulose nanofibrils (CNF), followed by freeze-drying and oven-heating, in which covalent bond between CNF and SAE was confirmed by FT-IR. Meanwhile, the regulation process of porous structure of cellulose aerogels was investigated by varying the properties of CNF, and the addition of carboxymethyl cellulose (CMC) and SAE. The results demonstrated that the porous structure of cellulose aerogel was gradually improved with increasing carboxyl content of CNF. CMC could effectively increase in specific surface area of cellulose aerogel, achieving a more preferred porous structure due to the elimination of hornification. SAE could highly enhance the uniformity of structure with specific surface area up to 184 m²/g, porosity up to 99%, and successfully improve the strength properties, showing the fabricated cellulose aerogel as a potential cushion packaging material.

Cellulose-based dispersants and flocculants

Natural dispersants and flocculants, often referred to as dispersion stabilizers and liquid-solid separators, respectively, have secured a promising role in the bioprocessing community. They have various applications, including in biomedicine and in environmental remediation. A large fraction of existing dispersants and flocculants are synthesized from non-safe chemical compounds such as polyacrylamide and surfactants. Despite numerous advantages of synthetic dispersants and flocculants, issues such as renewability, sustainability, biocompatibility, and cost efficiency have shifted attention towards natural homologues, in particular, cellulose-based ones. Within the past decade, cellulose derivatives, obtained via chemical and mechanical treatments of cellulose fibrils, have successfully been used for these purposes. In this review article, by dividing the functional cellulosic compounds into "polymeric" and "nanoscale" categories, we provide insight into the engineering pathways, the structural frameworks, and surface chemistry of these "green" types of dispersants and flocculants. A summary of their efficiency and the controlling parameters is also accompanied by recent advances in their applications in each section. We are confident that the emergence of cellulose-based dispersing and flocculating agents will extend the boundaries of sustainable green technology.

Degradation Kinetics of Anthocyanins from Purple Eggplant in a Fortified Food Model System during Microwave and Frying Treatments

A model food system was designed with dietary fiber and crude anthocyanins from purple eggplant peel to explore the degradation mechanism of anthocyanins during microwave and frying treatments. Our results found that delphinidin-3-O-rutinoside was either hydrolyzed into delphinidin or condensed with p-coumaric acid to form p-coumaroyl-delphinidin-3-O-glucoside. Delphinidin was cleaved into gallic acid and phloroglucinaldehyde, which might be further oxidized into pyrogallol and phloroglucinol, respectively. The total anthocyanin degradation followed the first-order kinetics in fried and microwaved solid matrix samples as well as microwaved liquid matrix samples. However, the total anthocyanin degradation followed the second-order kinetics in the heated liquid matrix samples at the frying temperature. The brown/polymeric color index, which negatively correlated with the anthocyanin content, increased faster in the liquid matrix samples than in the solid matrix samples. Compared with frying treatment, a higher rate of anthocyanin degradation in solution was observed under microwave treatment. However, anthocyanins were subject to much more damage under frying treatment than microwave treatment in a solid food system.

Microcrystalline cellulose as an effective crystal growth inhibitor for the ternary Ibrutinib formulation

The objective of present study is to explore whether polysaccharide could be a crystal growth inhibitor in poorly soluble antitumor drug Ibrutinib (IBR) formulation. In this work, small molecular ligands (amino or organic acids) in co-amorphous system (CAS) were preliminarily screened. A polysaccharide, microcrystalline cellulose (MCC) was selected to stabilize amorphous drug and enhance pharmacokinetic properties. Fourier-transform infrared, Raman, and X-ray photoelectron spectroscopy confirmed the ionic interaction of the ternary IBR formulation. Moreover, the biosafety of the ternary formulation was the same as that of IBR while the in vitro performance advantage of the ternary formulation was converted into higher bioavailability in vivo experiments. Overall, MCC as an effective crystal growth inhibitor in the novel ternary IBR formulation is a promising approach to improve the dissolution rate of crystalline drugs and the stability of amorphous drugs, as well as providing a theoretical basis for clinical applications.

Novel redispersible nanosuspensions stabilized by co-processed nanocrystalline cellulose-sodium carboxymethyl starch for enhancing dissolution and oral bioavailability of baicalin

BACKGROUND

To improve the dissolution and bioavailability of poorly soluble drugs, novel nanosuspensions using co-processed nanocrystalline cellulose-sodium carboxymethyl starch (NCCS) as a synergetic stabilizer were first designed.

METHODS

Co-processed NCCS was prepared by means of homogenization. Poorly soluble baicalin (BCA) was used as a model drug. BCA nanosuspension (BCA-NS/NCCS) using co-processed NCCS as a dispersant was prepared via homogenization and further converted into the dried BCA nanosuspension particle (BCA-NP/NCCS) via spray drying. The influence of NCCS on the dispersion efficiency of BCA-NS/NCCS was investigated. Morphology and crystal characteristic of NCCS and BCA-NP were analyzed. The dissolution and bioavailability evaluation were performed to investigate the feasibility of NCCS as a stabilizer for BCA-NS/NCCS and BCA-NP.

RESULTS

The optimum 50% concentration of NCCS (nanocrystalline cellulose [NCC]:sodium carboxymethyl starch [SCS]=60:40) could be mostly beneficial for formation and stability of BCA-NS/NCCS. NCCS could completely prevent aggregation of BCA-NP during spray drying and enhance the redispersibility as well as dissolution of spray-dried BCA-NP, which might be attributed to "brick-concrete"-based barrier effect of NCCS and the swelling capacity of superdisintegrant SCS. The crystal state of NCC and BCA presented in BCA-NP/NCCS remained unchanged during the homogenization. The BCA-NP/NCCS exhibited a fast dissolution rate and significantly enhanced bioavailability of BCA. The AUC(0-∞) of the BCA-NP/NCCS (8,773.38±718.18 µg/L·h) was 2.01 times (P<0.05) as high as that of the crude BCA (4,354.61±451.28 µg/L·h).

CONCLUSION

This study demonstrated that novel surfactant-free nanosuspensions could be prepared using co-processed NCCS as a synergetic stabilizer and also provided a feasible strategy to improve the dissolution and oral bioavailability of poorly soluble drug.

Investigating a Novel Hot Melt Extrusion-Based Drying Technique to Solidify an Amorphous Nanosuspension Using Design of Experiment Methodology

The hot melt extrusion (HME) technology was explored and optimized to solidify an amorphous nanosuspension using Quality by Design (QbD) methodology. A design of experiments (DoE) approach was used to perform a set of 15 experiments, varying independent variables (feed rate, input temperature, and screw speed) within a design space. Redispersibility index (RDI), moisture content, and process yield constituted the critical quality attributes (CQAs) of the experimental design. Regression analysis and ANOVA were employed to identify and estimate significant main effects and two-way interactions, and model the process of HME drying for predictive purposes. The optimized HME-dried end product was characterized for physicochemical properties using differential scanning calorimetry (DSC), X-ray powder diffractions (XRPD), polarized light microscopy (PLM), Fourier transform infrared spectroscopy (FTIR), and in vitro dissolution studies. The statistical analysis reveals feed rate and input temperature as significant independent variables, critically influencing RDI and moisture content of solidified end product. The model developed for process yield was insignificant at a p-value of 0.05. The API retained its amorphous nature after the extrusion process which was confirmed using DSC and XRPD techniques. PLM was unsuitable to differentiate and determine crystallinity of drug moiety in the presence of a semi-crystalline bulking agent, microcrystalline cellulose (MCC). In vitro dissolution study depicted solubility and dissolution enhancement for HME-dried amorphous nanosuspension in both the dissolution media which can be attributed to amorphous nature of nanosized drug particles. A well-designed study implemented by DoE aided in developing a robust and novel HME technique to dry aqueous nanosuspension.

Pure paclitaxel nanoparticles: preparation, characterization, and antitumor effect for human liver cancer SMMC-7721 cells

Introduction

Pure paclitaxel nanoparticles (PPN), consisting entirely of drug molecules, were prepared by the electrostatic spraying method as promising candidates for antitumor application. Compared with the traditional preparation method, the advantage of the electrostatic spraying method included high production rates, relatively small particle sizes, and ease of preparation.

Materials and methods

Paclitaxel was used to prepared PPN by electrostatic spray. The electrostatic spray device included a constant speed pump with a syringe, a high-voltage power supply, and a metal foil receiver was used to prepare and evaluate PPN. The syringe drew off a certain amount of paclitaxel chloroform solution (150 μg/mL) and was placed on the constant speed injection pump. The dissolution behavior of PPN was evaluated by dissolution test and the presence of paclitaxel in PPN was detected by X-Ray powder diffraction and differential scanning calorimetry. Effect of PPN on SMMC-7721 cells were studied by cell uptake, cell apoptosis and antitumor study.

Results

The results of X-ray powder diffraction and differential scanning calorimetry characterization showed that the PPN were in an amorphous state. A dissolution study indicated that PPN have a significantly enhanced dissolution rate of paclitaxel. Moreover, SMMC-7721 tumor cells treated with PPN exhibited a distinctly high uptake rate that promoted cell apoptosis. An in vivo antitumor study demonstrated that PPN had significant antitumor efficacy.

Conclusion

All conclusions verified that electrostatic spraying is a potential technology for developing PPN, and PPN can be regarded as a promising treatment for cancer.

The Shielding Effect of Microcrystalline Cellulose on Drug Nanocrystal Particles During Compaction

To elucidate the compaction behavior of drug nanocrystals based composite particles (NP) during tabletting, the compaction behavior of binary mixtures of microcrystalline cellulose (MCC) and nanocrystal particles was investigated. The force-displacement correlation of mixtures containing different ratios of MCC and micronized NP was studied in order to explain the nature on densification of NP during compaction, and the resultant compaction curves (pressure as function of in-die thickness) were systemically analyzed to elucidate the most important mechanisms of volume reduction for MCC and NP in different stages of compaction. The results showed that the close compaction of individual MCC was relatively quickly achieved, and the drug NP particles could slide into the intrinsic void spaces between MCC microparticles. This was the reason that the particles size of MCC used in this study was significantly larger compared to that of drug NP. This interstitial rearrangement phenomenon of NP occurred on a typical time scale and was strongly dependent on the speed of compaction. This migration behavior occurred on void spaces of MCC inter-particles might be identified as an elastic stress relaxation mechanism and be helpful to dissolution of NP. MCC can effectively shield the NP from significant aggregation during compaction process.

Bioavailability Enhancement of Poorly Water-Soluble Drugs via Nanocomposites: Formulation⁻Processing Aspects and Challenges

Drug nanoparticles embedded in a dispersant matrix as a secondary phase, i.e., drug-laden nanocomposites, offer a versatile delivery platform for enhancing the dissolution rate and bioavailability of poorly water-soluble drugs. Drug nanoparticles are prepared by top-down, bottom-up, or combinative approaches in the form of nanosuspensions, which are subsequently dried to prepare drug-laden nanocomposites. In this comprehensive review paper, the term &ldquo;nanocomposites&rdquo; is used in a broad context to cover drug nanoparticle-laden intermediate products in the form of powders, cakes, and extrudates, which can be incorporated into final oral solid dosages via standard pharmaceutical unit operations, as well as drug nanoparticle-laden strip films. The objective of this paper is to review studies from 2012⁻2017 in the field of drug-laden nanocomposites. After a brief overview of the various approaches used for preparing drug nanoparticles, the review covers drying processes and dispersant formulations used for the production of drug-laden nanocomposites, as well as various characterization methods including quiescent and agitated redispersion tests. Traditional dispersants such as soluble polymers, surfactants, other water-soluble dispersants, and water-insoluble dispersants, as well as novel dispersants such as wet-milled superdisintegrants, are covered. They exhibit various functionalities such as drug nanoparticle stabilization, mitigation of aggregation, formation of nanocomposite matrix⁻film, wettability enhancement, and matrix erosion/disintegration. Major challenges such as nanoparticle aggregation and poor redispersibility that cause inferior dissolution performance of the drug-laden nanocomposites are highlighted. Literature data are analyzed in terms of usage frequency of various drying processes and dispersant classes. We provide some engineering considerations in comparing drying processes, which could account for some of the diverging trends in academia vs. industrial practice. Overall, this review provides rationale and guidance for drying process selection and robust nanocomposite formulation development, with insights into the roles of various classes of dispersants.

Entangled and colloidally stable microcrystalline cellulose matrices in controlled drug release

Drug release from a new type of matrix material consisting of partially fibrillated microcrystalline cellulose was investigated. A mechanical treatment of novel AaltoCell™ cellulose microcrystals caused partial opening of the nanofibrillary structure of the cellulose particles and entanglement of individual particles led into formation of an elastic network of microcrystalline cellulose. The rheological properties of the stable hydrogel-like materials were characterised by shear rheometry. Model compounds metronidazole and lysozyme were successfully employed in drug release experiments carried out by delignified (bleached) and lignin-containing matrices. The viscosity as well as the lignin-content played a role in the release dynamics of the drugs. Microcrystalline AaltoCell™ was proven as high-performing material for diffusion controlled release of the chosen model compounds and can be seen as a safe and economical alternative for novel matrix materials such as nanocellulose or cellulose derivatives.

NanoCrySP technology for generation of drug nanocrystals: translational aspects and business potential

Drug nanocrystals have rapidly evolved into a mature drug delivery strategy in the last decade, with almost 16 products currently on the market. Several "top-down" technologies are available in the market for generation of nanocrystals. Despite several advantages, very few bottom-up technologies have been explored for commercial purpose. This short communication highlights a novel, bottom-up, spray drying based technology-NanoCrySP-to generate drug nanocrystals. Nanocrystals are generated in the presence of non-polymeric excipients that act as crystallization inducer for the drug. Excipients encourage crystallization of drug by plasticization, primary heterogeneous nucleation, and imparting physical barrier to crystal growth. Nanocrystals have shown significant improvement in dissolution and thereby oral bioavailability. NanoCrySP technology is protected through patents in India, the USA, and the European Union. NanoCrySP can be utilized for (i) pharmaceutical development of new chemical entities, (ii) differentiated products of existing molecules, and (iii) generic drug products. The aggregation of drug nanocrystals generated using NanoCrySP poses significant challenges in the nanocrystal-based product development. Addition of stabilizers either during spray drying or during dissolution has shown beneficial effects.

Design and Evaluation of Novel Solid Self-Nanodispersion Delivery System for Andrographolide

Poorly water-soluble drugs offer challenges in developing a formulation product with adequate bioavailability. This study took advantage of the features of nanocrystals and direct compression technologies to develop a novel solid self-nanodispersion delivery system for andrographolide (Andro) in order to increase its dissolution rate for enhancing bioavailability. Andro nanosuspensions (Andro-NS) with a particle size of about 500 nm were prepared by homogenization technology and further converted into dried nanocrystal particles (Andro-NP) via spray-drying. The solid self-nanodispersion delivery system (Andro-SNDS)-loaded Andro-NP was prepared via direct compression technology. The DSC and PXRD results demonstrated that the Andro nanocrystals retained its original crystallinity. The dissolution of the Andro-SNDS formulation was 85.87% in pure water over 30 min, better than those of the coarse Andro and physical mixture of Andro and stabilizer. And the C _max (299.32 ± 78.54 ng/mL) and AUC_0-∞ (4440.55 ± 764.13 mg/L · h) of the Andro-SNDS formulation were significantly higher (p < 0.05) than those of the crude Andro (77.52 ± 31.73 ng/mL and 1437.79 ± 354.25 mg/L · h). The AUC of the Andro-SNDS was 3.09 times as high as that of the crude Andro. This study illustrated a novel approach to combine the features of nanocrystals and composite particles used to improve oral bioavailability of poorly soluble drug.

Functionality and nutritional aspects of microcrystalline cellulose in food

Microcrystalline cellulose (MCC) is among the most commonly used cellulose derivatives in the food industry. In order assess the recent advances of MCC in food product development and its associated nutraceutical implications, google scholar and database of journals subscribed by Jiangnan university, China were used to source literature. Recently published research articles that reported physicochemical properties of MCC for food application or potential application in food and nutraceutical functions were reviewed and major findings outlined. The selected literature reviewed demonstrated that the material has been extensively explored as a functional ingredient in food including meat products, emulsions, beverages, dairy products, bakery, confectionary and filling. The carbohydrate polymer also has many promising applications in functional and nutraceutical food industries. Though widely used as control for many dietary fiber investigations, MCC has been shown to provide positive effects on gastrointestinal physiology, and hypolipidemic effects, influencing the expression of enzymes involved in lipid metabolism. These techno-functional and nutraceutical properties of MCC are influenced by the physicochemical of the material, which are defined by the raw material source and processing conditions. Apart from these functional properties, this review also highlighted limitations and gaps regarding the application of material in food and nutritional realms. Functional, Nutritional and health claims of MCC.

Microcrystalline cellulose based matrix solid phase dispersion microextration for isomeric triterpenoid acids in loquat leaves by ultrahigh-performance liquid chromatography and quadrupole time-of-flight mass spectrometry

An analytical procedure based on matrix solid phase dispersion (MSPD) microextration and ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry was developed for the determination of isomeric triterpenoid acids (maslinic acid, corosolic acid, oleanolic acid and ursolic acid) in loquat leaves. Microcrystalline cellulose was used for the first time as a solid sorbent in MSPD microextration. Compared with the traditional extraction methods, the proposed method possessed the advantages of shorter extraction time, and lower consumption of sample, sorbent and organic solvent. The MSPD parameters that influenced the extraction efficiency of isomeric analytes were investigated and optimized in detail. Under the optimized conditions, good linearity was obtained with correlation coefficients higher than 0.9990. The limits of detection and quantification were 19.6-51.6μg/kg and 65.3-171.8μg/kg, respectively. Meanwhile, the recoveries obtained for all the analytes were ranging from 90.1% to 107.5%. Finally, the optimized method was successfully applied for analyzing these isomeric acids in loquat leaves samples obtained from different cultivated areas.

Hydroxypropylcellulose as matrix carrier for novel cage-like microparticles prepared by spray-freeze-drying technology

The objective of this study is to design novel dissolution-enhanced microparticles loaded poorly soluble drug nanocrystals used a low viscosity of hydroxypropylcellulose (HPC) as matrix carrier. An interesting approach combined homogenization and the spray-freeze-drying technique was developed. The results demonstrated that the ratio of HPC to drug played an important role in size-reduction efficiency of drug during homogenization. And the formation of cage-like structure of the composite particles depended on ratio of HPC to drug. The spray-freeze-dried composite particles with HPC ratio of 1:2, 1:1 and 2:1 possessed excellent redispersibility, which attributed to its porous matrix and large surface area (3000m²/g). The dissolution of spray-freeze-dried composite particles with higher ratios of HPC (1:2 and 1:1) was significantly enhanced, which attributed to the particle size reduction of drug. The HPC could immobilize drug nanocrystals in its cage-like structure and prevent it from the subsequent agglomeration during storage. In conclusion, the prepared cage-like microparticles is a promising basis for further formulation development.

Panax Notoginseng Saponins as a Novel Nature Stabilizer for Poorly Soluble Drug Nanocrystals: A Case Study with Baicalein

This study is aimed at seeking a nature saponin-based stabilizer for drug nanosuspensions. A poorly soluble drug (baicalein, BCL) was used as a model drug. BCL nanosuspensions with particle size of 156 nm were prepared by means of homogenization and converted into BCL nanocrystals (BCL-NC) stabilized with panax notoginseng saponins (PNS). It was found that PNS was able to prevent the aggregation of BCL-NS during storage and improve the redispersibility of BCL-NC after freeze-drying and spray-drying, compared with polymer stabilizer PVPK30. The freeze-dried and spray-dried BCL-NC with PNS exhibited excellent performance as evidenced by scanning_electron_microscope (SEM) analysis. It was the reason that PNS possessed the interfacial property (41.69 ± 0.32 mN/m) and electrostatic effect (−40.1 ± 1.6 mV), which could easily adsorb onto the surface of hydrophobic BCL nanocrystals and prevent from its aggregation. It is concluded that PNS can be used as an effective nature stabilizer for production of drug nanocrystals.