Stimuli responsive ion gels based on polysaccharides and other polymers prepared using ionic liquids and deep eutectic solvents

Untapped Potential of Deep Eutectic Solvents for the Synthesis of Bioinspired Inorganic-Organic Materials

Since the discovery of deep eutectic solvents (DESs) in 2003, significant progress has been made in the field, specifically advancing aspects of their preparation and physicochemical characterization. Their low-cost and unique tailored properties are reasons for their growing importance as a sustainable medium for the resource-efficient processing and synthesis of advanced materials. In this paper, the significance of these designer solvents and their beneficial features, in particular with respect to biomimetic materials chemistry, is discussed. Finally, this article explores the unrealized potential and advantageous aspects of DESs, focusing on the development of biomineralization-inspired hybrid materials. It is anticipated that this article can stimulate new concepts and advances providing a reference for breaking down the multidisciplinary borders in the field of bioinspired materials chemistry, especially at the nexus of computation and experiment, and to develop a rigorous materials-by-design paradigm.

Dual electro- and magneto-induced bending actuators of magnetite-loaded agarose ionogels

Magnetic ionogels are a new kind of gel composites which combine the elastic properties from the swollen gel matrix and the magnetic properties from a magnetic filler. The dual electro-magneto-responsive agarose ionogels (AG IGels) were fabricated by a solution casting method using 1-butyl-3-methylimidazolium chloride [Bmim][Cl] as the ionic liquid solvent, and embedded with magnetite nanoparticles (Fe₃O₄ NPs). The addition of Fe₃O₄ NPs induced the high bending responses under applied electric and magnetic fields via the electronic polarization and magnetic interaction. The 3.0 wt.% Fe₃O₄/AG MagIGel showed the largest deflection distances relative to other magnetic gel composites; 14.92, 8.96, and 21.63 mm under the applied electric fields of 600 V/mm in silicone oil, 60 V/mm in air, and under the applied magnetic field of 600 G in air, respectively. The bending distances were of comparable in magnitudes to other electro-magneto-responsive materials. Thus, the fabricated Fe₃O₄/AG MagIGels are demonstrated here as potential for soft electric-magnetic actuator applications.

Dual Thermo-Responsive and Strain-Responsive Ionogels for Smart Windows and Temperature/Motion Monitoring

In this work, a stretchable, dual thermo-responsive and strain-responsive ionogel has been synthesized by one-step photopolymerization. The obtained ionogel shows an ultrahigh stretchability (∼3000%), a high ionic conductivity (up to 3.1 mS/cm), and a good temperature tolerance (-40 to 300 °C). Importantly, these ionogels show an upper critical solution temperature-type phase transition with a wide tunable phase-transition temperature (17.5-42.5 °C) and reversible color/transparency switching. In particular, the as-prepared ionogel-based flexible/wearable temperature monitors and smart windows show an excellent designability and programmability, temperature modulation ability, and thermal responsiveness. Moreover, the ionogels-based strain sensors have temperature- and strain-dual responsibility and a broad strain-sensing range (1-700%), which can effectively monitor various motions. This strategy of fabricating dual thermo- and strain-responsive ionogels by using a one-step method and only one polymer holds great promise for the next generation of multifunctional stimuli-responsive materials.

Ionic Liquids for Enhanced Drug Delivery: Recent Progress and Prevailing Challenges

Ionic liquids (ILs) are a class of nonmolecular compounds composed only of ions. Compared with traditional organic solvents, ILs have the advantages of wide chemical space, diverse and flexible structures, negligible vapor pressure, and high thermal stability, which make them widely used in many fields of modern science, such as chemical synthesis and catalytic decomposition, electrochemistry, biomass conversion, and biotransformation biotechnology. Because of their special characteristics, ILs have been favored in the pharmaceutical field recently, especially for the development of efficient drug delivery systems. So far, ILs have been successfully designed to promote the dissolution of poorly soluble drugs and the destruction of physiological barriers, such as the tight junction between the stratum corneum and the intestinal epithelium. In addition, ILs can also be combined with other drug strategies to stabilize the structure of small molecules. This Review mainly introduces the application of ILs in drug delivery, emphasizes the potential mechanism of ILs, and presents the key research directions of ILs in the future.

Emerging iongel materials towards applications in energy and bioelectronics

In the past two decades, ionic liquids (ILs) have blossomed as versatile task-specific materials with a unique combination of properties, which can be beneficial for a plethora of different applications. The additional need of incorporating ILs into solid devices led to the development of a new class of ionic soft-solid materials, named here iongels. Nowadays, iongels cover a wide range of materials mostly composed of an IL component immobilized within different matrices such as polymers, inorganic networks, biopolymers or inorganic nanoparticles. This review aims at presenting an integrated perspective on the recent progress and advances in this emerging type of material. We provide an analysis of the main families of iongels and highlight the emerging types of these ionic soft materials offering additional properties, such as thermoresponsiveness, self-healing, mixed ionic/electronic properties, and (photo)luminescence, among others. Next, recent trends in additive manufacturing (3D printing) of iongels are presented. Finally, their new applications in the areas of energy, gas separation and (bio)electronics are detailed and discussed in terms of performance, underpinning it to the structural features and processing of iongel materials.

Advances Brought by Hydrophilic Ionic Liquids in Fields Involving Pharmaceuticals

The negligible volatility and high tunable nature of ionic liquids (ILs) have been the main drivers of their investigation in a wide diversity of fields, among which is their application in areas involving pharmaceuticals. Although most literature dealing with ILs is still majorly devoted to hydrophobic ILs, evidence on the potential of hydrophilic ILs have been increasingly provided in the past decade, viz., ILs with improved therapeutic efficiency and bioavailability, ILs with the ability to increase drugs' aqueous solubility, ILs with enhanced extraction performance for pharmaceuticals when employed in biphasic systems and other techniques, and ILs displaying low eco/cyto/toxicity and beneficial biological activities. Given their relevance, it is here overviewed the applications of hydrophilic ILs in fields involving pharmaceuticals, particularly focusing on achievements and advances witnessed during the last decade. The application of hydrophilic ILs within fields involving pharmaceuticals is here critically discussed according to four categories: (i) to improve pharmaceuticals solubility, envisioning improved bioavailability; (ii) as IL-based drug delivery systems; (iii) as pretreatment techniques to improve analytical methods performance dealing with pharmaceuticals, and (iv) in the recovery and purification of pharmaceuticals using IL-based systems. Key factors in the selection of appropriate ILs are identified. Insights and perspectives to bring renewed and effective solutions involving ILs able to compete with current commercial technologies are finally provided.

Starch as a reinforcement agent for poly(ionic liquid) hydrogels from deep eutectic solvent via frontal polymerization

For the first time, conductive starch/poly(ionic liquid) hydrogels from a polymerizable deep eutectic solvent (DES) by frontal polymerization (FP) were reported. The solubility and dispersibility for starch granules in the polymerizable DES was investigated. The effects of starch content on FP behaviors, mechanical properties and electrical conductivity of composite hydrogels were studied. Results showed that starch could be partially dissolved and dispersed in the DES. Comparing with the pure poly(ionic liquid) hydrogel from DES (the tensile strength was 41 K Pa), the tensile strength of composite hydrogel could increased by 3.07 times and reached 126 K Pa. When the fixed strain was 80 %, its compressive strength could increase by 6 times and reaches 16.8 MPa. The main reason was that there was a strong interfacial interaction between starch and the polymer hydrogel network. The starch/poly(ionic liquid) composite hydrogels also had good electrical conductivity. Absorption of water could increase the conductivity of the composite hydrogel significantly.

Recent Developments in Solvent-Based Fluid Separations

The most important developments in solvent-based fluid separations, separations involving at least one fluid phase, are reviewed. After a brief introduction and discussion on general solvent trends observed in all fields of application, several specific fields are discussed. Important solvent trends include replacement of traditional molecular solvents by ionic liquids and deep eutectic solvents and, more recently, increasing discussion around bio-based solvents in some application fields. Furthermore, stimuli-responsive systems are discussed; the most significant developments in this field are seen for CO₂-switchable and redox-responsive solvents. Discussed fields of application include hydrocarbons separations, carbon capture, biorefineries, and metals separations. For all but the hydrocarbons separations, newly reported electrochemically mediated separations seem to offer exciting new windows of opportunities.

Advances in Separation and Purification of Bioactive Polysaccharides through High-speed Counter-Current Chromatography

Polysaccharides, with an extensive distribution in natural products, represent a group of natural bioactive substances having widespread applications in health-care food products and as biomaterials. Devising an efficient system for the separation and purification of polysaccharides from natural sources, hence, is of utmost importance in the widespread applicability and feasibility of research for the development of polysaccharide-based products. High-speed counter-current chromatography (HSCCC) is a continuous liquid-liquid partitioning chromatography with the ability to support a high loading amount and crude material treatment. Due to its flexible two-phase solvent system, HSCCC has been successfully used in the separation of many natural products. Based on HSCCC unique advantages over general column chromatography and its enhanced superiority in this regard when coupled to aqueous two-phase system (ATPS), this review summarizes the separation and purification of various bioactive polysaccharides through HSCCC and its coupling to ATPS as an aid in future research in this direction.

Preparing, optimising, and evaluating chitosan nanocapsules to improve the stability of anthocyanins from Aronia melanocarpa

During in vitro digestion and enviromental storage, the chitosan nanocapsulation was successfully improved the physical and oxidative stability of anthocyanins from Aronia melanocarpa.

Use of Ionic Liquids and Deep Eutectic Solvents in Polysaccharides Dissolution and Extraction Processes towards Sustainable Biomass Valorization

A shift to a bioeconomy development model has been evolving, conducting the scientific community to investigate new ways of producing chemicals, materials and fuels from renewable resources, i.e., biomass. Specifically, technologies that provide high performance and maximal use of biomass feedstocks into commodities with reduced environmental impact have been highly pursued. A key example comprises the extraction and/or dissolution of polysaccharides, one of the most abundant fractions of biomass, which still need to be improved regarding these processes' efficiency and selectivity parameters. In this context, the use of alternative solvents and the application of less energy-intensive processes in the extraction of polysaccharides might play an important role to reach higher efficiency and sustainability in biomass valorization. This review debates the latest achievements in sustainable processes for the extraction of polysaccharides from a myriad of biomass resources, including lignocellulosic materials and food residues. Particularly, the ability of ionic liquids (ILs) and deep eutectic solvents (DESs) to dissolve and extract the most abundant polysaccharides from natural sources, namely cellulose, chitin, starch, hemicelluloses and pectins, is scrutinized and the efficiencies between solvents are compared. The interaction mechanisms between solvent and polysaccharide are described, paving the way for the design of selective extraction processes. A detailed discussion of the work developed for each polysaccharide as well as the innovation degree and the development stage of dissolution and extraction technologies is presented. Their advantages and disadvantages are also identified, and possible synergies by integrating microwave- and ultrasound-assisted extraction (MAE and UAE) or a combination of both (UMAE) are briefly described. Overall, this review provides key information towards the design of more efficient, selective and sustainable extraction and dissolution processes of polysaccharides from biomass.

Elastic and Thermoreversible Iongels by Supramolecular PVA/Phenol Interactions

Iongels have attracted much attention over the years as ion-conducting soft materials for applications in several technologies including stimuli-responsive drug release and flexible (bio)electronics. Nowadays, iongels with additional functionalities such as electronic conductivity, self-healing, thermo-responsiveness, or biocompatibility are actively being searched for high demanding applications. In this work, a simple and rapid synthetic pathway to prepare elastic and thermoreversible iongels is presented. These iongels are prepared by supramolecular crosslinking between polyphenols biomolecules with a hydroxyl-rich biocompatible polymer such as poly(vinyl alcohol) (PVA) in the presence of ionic liquids. Using this strategy, a variety of iongels are obtained by combining different plant-derived polyphenol compounds (PhC) such as gallic acid, pyrogallol, and tannic acid with imidazolium-based ionic liquids, namely 1-ethyl-3-methylimidazolium dicyanamide and 1-ethyl-3-methylimidazolium bromide. A suite of characterization tools is used to study the structural, morphological, mechanical, rheological, and thermal properties of the supramolecular iongels. These iongels can withstand large deformations (40% under compression) with full recovery, revealing reversible transitions from solid to liquid state between 87 and 125 °C. Finally, the polyphenol-based thermoreversible iongels show appropriated properties for their potential application as printable electrolytes for bioelectronics.

Recent progress in the industrial and biomedical applications of tragacanth gum: A review

Natural polymers have distinct advantages over synthetic polymers because of their abundance, biocompatibility, and biodegradability. Tragacanth gum, an anionic polysaccharide, is a natural polymer which is derived from renewable sources. As a biomaterial, tragacanth gum has been used in industrial settings such as food packaging and water treatment, as well as in the biomedical field as drug carriers and for wound healing purposes. The present review provides an overview on the state-of-the-art in the field of tragacanth gum applications. The structure, properties, cytotoxicity, and degradability as well as the recent advances in industrial and biomedical applications of tragacanth gum are reviewed to offer a backdrop for future research.

Self-Assembled Gels Formed in Deep Eutectic Solvents: Supramolecular Eutectogels with High Ionic Conductivity

1,3:2,4-Dibenzylidene-d-sorbitol (DBS), a simple, commercially relevant compound, was found to self-assemble as a result of intermolecular noncovalent interactions into supramolecular gels in deep eutectic solvents (DESs) based on choline chloride combined with alcohols/ureas. DBS formed gels at a loading of 5 % w/v. Rheology confirmed the gel-like nature of the materials, electron microscopy and X-ray diffraction indicated underpinning nanofibrillar DBS networks, and differential scanning calorimetry showed the DES nature of the liquid-like phase was retained. The ionic conductivities of the gels were similar to those of the unmodified DESs, thus proving the deep eutectic nature of the ionic liquid-like phase. Gelation was tolerant of ionic additives Li⁺ , Mg²⁺ , and Ca²⁺ ; the resulting gels had similar conductivities to electrolyte dissolved in the native DES. The low-molecular-weight gelator DBS is thus a low-cost additive that forms gels in DESs from readily available constituents, with conductivity levels suitable for practical applications.